Suppose you have equal amounts of calcium, Ca, in two beakers. In one beaker, you react the calcium with oxygen, O. In the other beaker, you react the calcium with sulfur, S.The reaction with oxygen forms the compound calcium oxide, CaO. What do you predict is the chemical formula of the compound formed from the reaction between calcium and sulfur?

The electron configuration of chromium (Cr) is actually 3d5 4s1, not 3d4 4s2 as one would expect based on the filling order of orbitals. This is due to a phenomenon called the "Aufbau principle," which states that electrons will always fill the lowest energy orbital available before filling higher energy orbitals.

In the case of chromium, the 3d orbital is actually slightly lower in energy than the 4s orbital, meaning that one electron fills the 4s orbital first, followed by five electrons in the 3d orbital. This is known as a "half-filled d subshell," which is particularly stable due to the exchange energy associated with electron-electron repulsion.
It is important to note that the electron configuration of an element is determined by the observed behavior of electrons in that element, not by any preconceived notions or rules. Therefore, while the filling order of orbitals can be predicted based on theoretical models, the actual observed electron configuration may deviate from these predictions due to various factors, including the relative energies of different orbitals.

for more such questions on chromium

https://brainly.com/question/30163849

#SPJ11

Based on the Lewis structure of NO2- and VSEPR theory, the central N in NO2- has a trigonal planar electron geometry due to the three electron pairs surrounding it.

The two oxygen atoms are located in the equatorial positions, while the lone pair of electrons occupies the axial position. The lone pair-lone pair repulsion is stronger than the lone pair-bond pair or bond pair-bond pair repulsions. This leads to a compression of the bond angles. Therefore, the estimated bond angle about the central N in NO2- is slightly less than 120°. The bond angle can be affected by various factors such as the electronegativity of the atoms involved and the presence of lone pairs. In the case of NO2-, the presence of a lone pair on the central N leads to a deviation from the ideal 120° bond angle. This is due to the repulsion between the lone pair and the oxygen atoms, causing a decrease in the bond angle. Therefore, the statement that most accurately estimates the bond angle about the central N in NO2- is "it is slightly less than 120°".

learn more about NO2- here

https://brainly.com/question/9331100

#SPJ11

"The information that should be included on a label for a peroxide-forming chemical is - Date received, date opened, and date to discard".

The information that should be included on a label for a peroxide-forming chemical is the date received, date opened, and date to discard. This information is essential to ensure the safe handling and storage of the chemical.

It is important to keep track of when the chemical was received, as well as when it was opened, in order to determine its shelf life and prevent any potential hazards.

Additionally, including the date to discard on the label ensures that the chemical is not used beyond its safe and effective period.

Visit here to learn more about Chemicals:

brainly.com/question/29886197

#SPJ11

The products of this reaction are Tin (Sn) and Water (2H_{2}O). The reactants, Tin(IV) oxide (SnO_{2}) and Hydrogen gas (2H_{2}), undergo a redox reaction to produce these products.

In the given chemical reaction, SnO_{2} + 2H_{2]} → Sn + 2H_{2}O., the products are Sn (Tin) and 2H_{2}O (Water). Let's analyze the reaction step-by-step.
1. The reactants are SnO_{2} (Tin(IV) oxide) and 2 H_{2}(Hydrogen gas).

Tin is commonly used in the manufacturing of metal alloys, such as bronze and pewter, and can also be found in the production of tinplate for food packaging.
2. The reaction involves the reduction of SnO_{2}  and the oxidation of H_{2}
3. SnO2 loses oxygen and is reduced to Sn (Tin). Meanwhile, H2 gains oxygen and is oxidized to H2O (Water).
4. The balanced chemical equation is: SnO_{2} + 2H_{2]} → Sn + 2H_{2}O.
In summary, the products of this reaction are Tin (Sn) and Water (2H_{2}O). The reactants, Tin(IV) oxide (SnO2) and Hydrogen gas (2 H_{2}), undergo a redox reaction to produce these products.

learn more about Tin (Sn) Refer: https://brainly.com/question/3835242

#SPJ11

The vapor pressure of water at 81°C is 3.61 atm.

To calculate the vapor pressure of water at 81°C, we can use the Clausius-Clapeyron equation, which relates the vapor pressure of a substance to its enthalpy of vaporization and temperature.

The equation is:

ln(P2/P1) = (ΔHvap/R) x (1/T1 - 1/T2)

where:P1 = vapor pressure at temperature T1

P2 = vapor pressure at temperature T2

ΔHvap = heat of vaporization

R = gas constant (8.314 J/mol K)

We can use the equation to solve for P2, given that we know P1, ΔHvap, T1, and T2. We will assume that the heat of vaporization of water is constant over this temperature range.

First, we need to convert the temperatures to Kelvin:

T1 = 25°C + 273.15 = 298.15 K

T2 = 81°C + 273.15 = 354.15 K

Next, we can plug in the values we know:

ln(P2/3.13x10-²) = (4.39x10⁴ J/mol / 8.314 J/mol K) x (1/298.15 K - 1/354.15 K)

Simplifying the right-hand side of the equation:

ln(P2/3.13x10-² atm) = 19.7

Finally, solving for P2:

P2/3.13x10-² atm = e¹⁹·⁷

P2 = 3.61 atm

To learn more about vapor pressure here:

https://brainly.com/question/30396289

#SPJ4

At STP, there are 0.0446 moles of oxygen in 1000 mL

n = (V / Vm)

where n is the number of moles, V is the volume of the gas in liters, and Vm is the molar volume of the gas at STP (22.4 L/mol).

Converting the given volume of 1000 mL to liters:

V = 1000 mL = 1 L

Substituting the values into the formula:

n = (1 L) / (22.4 L/mol) = 0.0446 mol

STP stands for Standard Temperature and Pressure, which are standardized conditions used in chemistry to compare and measure the properties of gases. The standard temperature is defined as 0°C (273.15 K), while the standard pressure is 1 atmosphere (atm) or 101.325 kilopascals (kPa).

At STP, one mole of any gas occupies a volume of 22.4 liters. This value is known as the molar volume and is useful in various chemical calculations. Additionally, the ideal gas law, which relates the pressure, volume, and temperature of a gas, is often used at STP conditions to simplify calculations. STP is essential for defining and comparing gas properties, as different gases behave differently under different conditions.

To learn more about STP visit here:

brainly.com/question/24050436

#SPJ4

The sample of gas that occupies 24m³ of volume at 175°K will have a volume of 30.5m³ at 400.0 K.

We can use the combined gas law to solve this problem, which relates the pressure, volume, and temperature of a gas in a closed system. The combined gas law is expressed as,

(P₁ x V₁)/T₁ = (P₂ x V₂)/T₂,

We can assume that the pressure of the gas is constant, as the problem does not provide information about any changes in pressure. Therefore, we can simplify the combined gas law to,

(V₁/T₁) = (V₂/T₂)

The starting volume, V₁, is 24 m3 and the initial temperature, T₁, is 175°C.

T(K) = T(°C) + 273.15

So, the initial temperature in kelvin is,

T₁ = 175°C + 273.15 = 448.15 K

We are asked to find the final volume, V₂, when the temperature is 400.0 K. Therefore, we can rearrange the equation to solve for V₂,

V₂ = (V₁/T₁) × T₂

Substituting the values we know,

V₂ = (24 m³ / 448.15 K) × 400.0 K

V₂ = 1.27 × 24 m³

V₂ = 30.5 m³

Therefore, the gas would occupy 30.5 m³ at 400.0 K.

To know more about combined gas law, visit,

https://brainly.com/question/13154969

#SPJ4

If we 800,000 atoms of the radioactive substance. After the 3 half-lives have past, the number of the atoms remain are 100000 atoms.

The initial amount of the radioactive substance = 800,000 atoms

The Number of half lives = 3  half - lives

The amount remaining of the radioactive element after the "n" half lives :

N = [tex]No[/tex][tex](1/2)^{n}[/tex]

Where,

No = the initial amount

n = Number of the half lives

N = 800,000( 1/2 )³

N = 100000 atoms

N is the number of the reaming atoms = 100000 atoms.

Therefore, the number of remaining atoms after the 3 half - lives is 100000 atoms.

To learn more about half-lives here

https://brainly.com/question/23760456

#SPJ1

The answer C less active (or more noble) than hydrogen. This is because copper has a lower tendency to lose electrons and form cations compared to hydrogen. In other words, copper is a relatively stable element that is not as easily oxidized as hydrogen.

They can be seen in the electrochemical series, which ranks elements according to their tendency to undergo oxidation or reduction reactions. Hydrogen is located higher up on the series, indicating that it is more reactive and has a greater tendency to lose electrons and form cations. On the other hand, copper is located lower down on the series, indicating that it is less reactive and has a lower tendency to undergo oxidation. It is worth noting that copper can still undergo oxidation reactions under certain conditions. For example, when exposed to air and moisture, copper can slowly react to form copper oxide. Additionally, copper can be used as an anode in certain electrochemical cells, indicating that it is more anodic than some other metals. However, in general, copper is considered to be a relatively stable and unreactive element, particularly compared to hydrogen.

learn more about copper here.

https://brainly.com/question/13677872

#SPJ11

Answer: clockwise north

Explanation:

A high pressure system has higher pressure at its center than the areas around it. Winds blow away from high pressure. Swirling in the opposite direction from a low pressure system, the winds of a high pressure system rotate clockwise north of the equator and counterclockwise south of the equator. This is called anticyclonic flow. Air from higher in the atmosphere sinks down to fill the space left as air is blown outward. On a weather map, you may notice a blue H, denoting the location of a high pressure system.

1. CO: 3 electron pairs are shared.
2. O₂: Two electron pairs are shared.
3. ClO: 1 electron pair is shared.
4. CN: Three electron pairs are shared.

Here's the information about the shared electron pairs (bonds) in each of the molecules and ions:

1. CO - Carbon Monoxide has a triple bond between C and O, which means 3 electron pairs are shared.
2. O₂ - Oxygen molecule has a double bond between the two O atoms, which means 2 electron pairs are shared.
3. ClO - Chlorine Monoxide has a single bond between Cl and O, which means 1 electron pair is shared.
4. CN - Cyanide ion has a triple bond between C and N, which means 3 electron pairs are shared.

For more such questions on Electron pairs.

https://brainly.com/question/18651326#

#SPJ11

27 moles of reactants chemically change into 34 moles of products. Option A

One or more chemicals, referred to as reactants, are transformed into one or more new substances, referred to as products, during a chemical reaction. Chemical bonds between atoms, ions, or molecules are broken and created during chemical reactions.

When  we look at the reaction, we can see that the statement that is true about the total number of reactants and the total number of products in the reaction 27 moles of reactants chemically change into 34 moles of products.

Learn more about reaction:https://brainly.com/question/9601381

#SPJ1

The assertion stating that the term vapour is used to represent the gaseous state of a substance which is otherwise liquid at room temperature is true, but the reason is not a correct explanation.

Vapour is commonly used to describe the gaseous state of a substance that is present at a liquid or solid state at room temperature and atmospheric pressure. When a liquid or solid substance evaporates, vapours are formed that can be inhaled.

Even though the ammonia gas can be referred to as ammonia vapour,  the reason does not explain why vapour is used to describe the gaseous state of substances that are typically present in liquid or solid state at room temperature.

Learn more about the vapour here:

https://brainly.com/question/29499734

#SPJ1

Answer:

true

Explanation:

To determine if ethylene glycol n-butyl ether-water is one or two-phase system, we need to compare the tie-line length and the lever rule calculation. A single stable liquid phase with a mass fraction of 30% ethylene glycol n-butyl ether and 70% water is present at equilibrium.

Assuming that the system follows Raoult's law and that the activity coefficients are equal to one, we can use the following equation to calculate the tie-line length:

Tie-line length = (x2 - x1) / (y1 - x1)

where x1 and x2 are the mole fractions of water in the liquid phase and vapor phase, respectively, at the two-phase boundary, and y1 is the mole fraction of water in the liquid phase at the point where the tie-line intersects the tie-line axis.

Using the given data, we can calculate the mole fraction of water in the liquid phase at the two-phase boundary as follows:

x1 = 0.3 (given)

x2 = 1 - x1 = 0.7

y1 = x1 = 0.3 (assuming the vapor phase is pure water)

Substituting these values into the tie-line equation, we get:

Tie-line length = (0.7 - 0.3) / (0.3 - 0.3) = 0

Since the tie-line length is zero, the system is a single-phase liquid, and there is no two-phase region. Therefore, the answer is that the system is one stable liquid phase at equilibrium, with a mass fraction of water of 70% and a mass fraction of ethylene glycol n-butyl ether of 30%.

To know more about the two-phase system refer here :

https://brainly.com/question/15407961#

#SPJ11

For a concentration of PBDEs in herring gull eggs, doubling time for PBDEs in this source is 0.778 yrs. The concentration in 2010 is equals to 44.16 ppm.

We have a concentration of PBDEs in herring gull eggs from the Great Lakes was about 1100 ppb in 1990.

Concentration in 2000 = 7000 ppm

= 7000 × 10³ ppb

We have to doubling time for PBDEs in this source and concentration in 2010.

Time = 10 yr

The rate constant is [tex]k = \frac{ 2.303 }{t} \frac{ log[a]}{log[a - x]}[/tex],

Plugging the values, [tex]k = \frac{ 2.303 }{10} log( \frac{ 7000× 10³ }{1100})[/tex]

= 0.875/yr

Doubling time = 0.69/k

= 0.778 yrs.

Now, the we determine the concentration in 2010. Let the concentration be equal x.

[tex]0.778 = \frac{ 2.303 }{10} log(\frac{ x}{7000 })[/tex]

=> [tex]\frac{ x}{7000 \: ppm} = 10^{3.8}[/tex]

=> x = 44.16

Hence, required value is 44.16 ppm.

For more information about Concentration, visit:

https://brainly.com/question/28564792

#SPJ4

An acidic solution can be defined as one that has an excess of H+ ions .So the correct option is option B.

Acidity is a property of a substance that describes its ability to donate hydrogen ions (H+). A substance with a high concentration of H+ ions is considered acidic. In aqueous solutions, the concentration of H+ ions is balanced by the concentration of hydroxide ions (OH-). When the concentration of H+ ions is greater than the concentration of OH- ions, the solution is acidic.

Option A is incorrect because an excess of OH- ions in a solution makes it basic or alkaline, not acidic.

Option C is incorrect because the anion is not directly related to acidity. An anion is a negatively charged ion that is formed when an atom gains one or more electrons.

Option D is incorrect because electrochemistry deals with the transfer of electric charge in chemical reactions. Acidity is a broader concept that involves the concentration of H+ ions in a solution.

Option E is incorrect because the loss of electrons yielding a positively charged ion is called oxidation, which is not directly related to acidity.

Learn more about  anion here:

https://brainly.com/question/20781422

#SPJ11

The following that indicates the least pressure is C) 5.5 mmHg.

To compare these pressure values, let's first convert them all to a common unit, such as Pascal (Pa).

A) 1 atm = 101,325 Pa
B) 777 torr = 101,325 * (777/760) = 103,373.6 Pa (approx.)
C) 5.5 mmHg = 101,325 * (5.5/760) = 749.6 Pa (approx.)
D) 100 kPa = 100,000 Pa
E) 12 psi = 12 * 6,894.76 = 82,737.12 Pa (approx.)

Now, we can compare these values to find the least pressure:
A) 101,325 Pa
B) 103,373.6 Pa
C) 749.6 Pa
D) 100,000 Pa
E) 82,737.12 Pa

So, the least pressure is indicated by option C) 5.5 mmHg, which is approximately 749.6 Pa.

To know more about the least pressure refer here :

https://brainly.com/question/28450681#

#SPJ11

The melting point of tin is 231.9 degrees C, Iron does not burn when exposed to flame, The density of solid silver is 10.49 grams/centimeter³ and Pure water is odorless are Physical property.

Although a physical change happens when substance alters forms without changing its chemical identity, a chemical change is the result of a chemical reaction. If enough energy is provided, many physical changes can be reversed. A different chemical reaction is the only way to undo a chemical change.

The melting point of tin is 231.9 degrees C, Iron does not burn when exposed to flame, The density of solid silver is 10.49 grams/centimeter³ and Pure water is odorless are Physical property. Sodium can react with water to form sodium hydroxide and hydrogen is Chemical property.

To know more about Physical property and Chemical property, here:

https://brainly.com/question/1935242

#SPJ1

The bond between oxygen and hydrogen in water (H2O) is a polar bond because oxygen is more electronegative than hydrogen, causing the electrons to be unevenly shared and resulting in a partial negative charge on the oxygen and a partial positive charge on the hydrogen.

The bond between nitrogen atoms in diatomic nitrogen (N2) is a nonpolar bond because the atoms are identical and therefore have an equal pull on the shared electrons, resulting in an even distribution of charge. The statement "electrons are not equally shared by the atoms in a covalent bond, one atom has a partial negative charge, and the other atom has a partial positive charge" describes a polar bond, while the statement "electrons are equally shared between atoms in a covalent bond" describes a nonpolar bond.

The strongest covalent bonds are quadruple covalent bonds. The bond gets stronger the more bonding partners there are.

The sharing of electrons between two species creates a covalent connection.

They frequently exist between molecules with comparable electronegativities.

The strength of the bonds between the atoms is based on their quantity.

Learn more about covalent bond here

https://brainly.com/question/19382448

#SPJ11

The value of q is 66.4 kJ.

The given chemical equation is:

[tex]\mathrm{N_2(g) + 2O_2(g) \rightarrow 2NO_2(g)} \qquad \Delta H = +66.4 \text{ kJ/mol}[/tex] = 66.4 kJ/mol

Since the enthalpy change (ΔH) is positive, it means that heat is absorbed during the reaction, indicating that this reaction is endothermic.

The amount of heat absorbed (q) can be calculated using the following formula:

q = nΔH

where n is the number of moles of reactant that undergo the reaction.

For this reaction, 1 mole of [tex]\mathrm{N_2}[/tex]reacts, so n = 1.

Therefore, the amount of heat absorbed is:

q = (1 mol) × (66.4 kJ/mol) = 66.4 kJ

So, the value of q is 66.4 kJ.

Learn more about heat absorbed

https://brainly.com/question/30836915

#SPJ4

Students would stand to model the molecules in a solid against the classroom wall. Therefore, the correct option is option C.

According to the context, the term could refer to any ions that meet this requirement. A molecule is a collection of at least two atoms linked together by the attractive forces referred to as chemical bonds.

When speaking of polyatomic ions. Students would stand to model the molecules in a solid against the classroom wall.

Therefore, the correct option is option C.

To know more about molecule, here:

https://brainly.com/question/19922822

#SPJ1

Your question is incomplete but most probably your full question was,  

Mrs. Jones' class was learning about how molecules are arranged in solids, liquids, and gases. To model molecules in liquids, she had the students stand one meter apart.

Which ,begin emphasis,best,end emphasis, describes how the students would stand to model the molecules in a solid?

Answer options with 5 options

A.

as far apart as possible

B.

in rows one meter apart

C.

as close as possible

D.

against the classroom wall

E.

five meters apart

In solution 4 of part b, both the hydronium concentration and hydroxide concentration are 1 M due to the neutralization reaction between HCl and NaOH. The initial concentrations of H₃O⁺ and OH⁻ were 0.1 M, but they reacted to form water and resulted in equal final concentrations of 1 M for both ions.

To calculate the hydronium and hydroxide concentrations for solution 4 in part b, we need to first understand the equation for the reaction that occurred.

The equation given is: HCl + NaOH -> NaCl + H₂O

This tells us that one mole of HCl reacts with one mole of NaOH to produce one mole of NaCl and one mole of water.

Based on this equation, we know that the initial concentration of hydroxide ions (OH-) in solution 4 is equal to the initial concentration of sodium hydroxide (NaOH), which was given as 0.1 M.

Next, we need to determine the concentration of hydronium ions (H₃O⁺). Since HCl is a strong acid, it completely dissociates in water to produce H₃O⁺ and Cl⁻ ions. Therefore, we can assume that the initial concentration of H₃O⁺ is equal to the initial concentration of HCl, which was also given as 0.1 M.

Now, let's consider what happens when the HCl and NaOH are mixed together. They react to form NaCl and water, which means that the concentrations of H₃O⁺ and OH⁻ will change.

From the equation, we can see that the reaction consumes one mole of HCl and one mole of NaOH. This means that the final concentration of HCl and NaOH will both be zero.

To determine the final concentration of OH-, we need to use the fact that the reaction produces one mole of water for every mole of NaOH that reacts. Therefore, the final concentration of OH⁻ will be equal to the initial concentration of NaOH (0.1 M) divided by the volume of the solution.

If we assume that the volume of the solution is 100 mL (as stated in the question), then the final concentration of OH- will be:

[OH⁻] = 0.1 M / 0.1 L = 1 M

Finally, we can use the fact that the concentration of H₃O⁺ and OH⁻ must be equal in a neutral solution to determine the final concentration of H₃O⁺.

Since the final concentration of OH⁻ is 1 M, we know that the final concentration of H₃O⁺ must also be 1 M.

To know more about the hydronium & hydroxide concentrations refer here :

https://brainly.com/question/29286376#

#SPJ11

The net-ionic equation for the precipitation reaction that occurs upon the addition of a 1 M solution of calcium ions to a solution containing hydrogen phosphate ions is Ca²⁺ + HPO₄²⁻ → CaHPO₄(s).

To write out the net-ionic equation for the precipitation reaction that occurs when hydrogen phosphate ion is combined with a 1 M solution of a cation,  include the terms net-ionic equation, precipitation reaction, hydrogen phosphate ion, and 1 M solution.

Step 1: Identify the reacting ions.
In this case, the hydrogen phosphate ion is  HPO₄²⁻

Step 2: Identify the cation that would form a precipitate with the hydrogen phosphate ion.
A common cation that forms a precipitate with hydrogen phosphate ion is calcium (Ca^(2+)). When added to a 1 M solution, the calcium ions will react with the hydrogen phosphate ions.

Step 3: Write out the molecular equation for the reaction.
Ca²⁺ + HPO₄²⁻ → CaHPO₄(s)

Step 4: Write out the net-ionic equation for the precipitation reaction.
Since there are no spectator ions in this reaction, the net-ionic equation is the same as the molecular equation:

Ca²⁺ + HPO₄²⁻ → CaHPO₄(s)

So, the net-ionic equation for the precipitation reaction that occurs upon the addition of a 1 M solution of calcium ions to a solution containing hydrogen phosphate ions is Ca²⁺ + HPO₄²⁻ → CaHPO₄(s)

To know more about precipitation reaction, refer

https://brainly.com/question/13016165

#SPJ11

The given reactions consist of a variety of elementary and global reactions. Among them, reactions A and F are bimolecular elementary reactions involving the collision of two molecules, reactions C and D are termolecular and unimolecular elementary reactions, respectively.

Reactions B and E are global reactions that occur through a series of elementary steps. Each reaction demonstrates distinct characteristics in terms of the number of molecules involved and the reaction mechanism.

A. Elementary, bimolecular. This is a bimolecular reaction because it involves the collision of two molecules, CO and OH, in a single elementary step.

B. Global. This reaction does not occur in a single step, but rather involves a series of elementary steps that together constitute the global reaction.

C. Elementary, termolecular. This is a termolecular reaction because it involves the collision of three molecules, H, OH, and O₂, in a single elementary step.

D. Elementary, unimolecular. This is a unimolecular reaction because it involves the rearrangement of a single molecule, HOCO, in a single elementary step.

E. Global. This reaction does not occur in a single step, but rather involves a series of elementary steps that together constitute the global reaction.

F. Elementary, bimolecular. This is a bimolecular reaction because it involves the collision of two molecules, OH and HM, in a single elementary step. The resulting product HOM can then undergo further reactions, but these would not be included in the classification of this initial step.

To know more about the Elementary reaction refer here :

https://brainly.com/question/31022212#

#SPJ11

Classify the following reactions as being either global or elementary. For those identified as elementary, further classify them as unimolecular, bimolecular, or termolecular.

Give reasons for your classification. A. CO + OH CO2+H. B. 2Co +o2->2CO, C. H, +OH+H+O2 D. HOCO H-CO2 E. CH, 20CO, 2H,O F. OH+HM-H,OM.

To solve this problem, we need to use the solubility product expression for calcium iodate:

Ca(IO3)2(s) ⇌ Ca2+(aq) + 2IO3-(aq)

The solubility product constant, Ksp, is given by:

Ksp = [Ca2+][IO3-]^2

To calculate Ksp for a saturated solution of Ca(IO3)2 in 0.0100 M KIO3, we need to determine the concentrations of Ca2+ and IO3- ions at equilibrium. We assume that Ca(IO3)2 is completely dissociated and that the activity coefficients of the ions are equal to 1. Therefore, we can write:

Ca(IO3)2(s) ⇌ Ca2+(aq) + 2IO3-(aq)

Let's assume that the molar solubility of Ca(IO3)2 in this solution is s. Then, the concentrations of Ca2+ and IO3- ions at equilibrium are [Ca2+] = s and [IO3-] = 2s. Substituting these values into the Ksp expression, we get:

Ksp = [Ca2+][IO3-]^2 = s(2s)^2 = 4s^3

Now, we need to determine the value of s by using the given concentration of KIO3. Since KIO3 is a strong electrolyte, it completely dissociates in water to give K+ and IO3- ions. Therefore, the concentration of IO3- ions in the solution is equal to the concentration of KIO3, which is 0.0100 M. Using this value, we can write the following equilibrium equation for Ca(IO3)2:

Ca(IO3)2(s) ⇌ Ca2+(aq) + 2IO3-(aq)

ICE table:

I: Ca(IO3)2(s) -- -- --

C: -s +s +2s

E: s 2s --

Substituting the equilibrium concentrations into the Ksp expression, we get:

Ksp = 4s^3 = 5.12 × 10^-10

Therefore, the solubility product constant for Ca(IO3)2 in 0.0100 M KIO3 is 5.12 × 10^-10.

To calculate the molar solubility of Ca(IO3)2 in 0.020 M Ca(NO3)2, we can assume that Ca(NO3)2 is completely dissociated and that the activity coefficients of the ions are equal to 1. Therefore, we can write:

Ca(IO3)2(s) ⇌ Ca2+(aq) + 2IO3-(aq)

Let's assume that the molar solubility of Ca(IO3)2 in this solution is s. Then, the concentrations of Ca2+ and IO3- ions at equilibrium are [Ca2+] = 0.020 M and [IO3-] = 2s. Substituting these values into the Ksp expression, we get:

Ksp = [Ca2+][IO3-]^2 = (0.020)(2s)^2 = 0.08s^2

Since Ksp = 2.0 × 10^-4, we can write:

0.08s^2 = 2.0 × 10^-4

Solving for s, we get:

s = 0.0158 M

Therefore, the molar solubility of Ca(IO3)2 in 0.020 M Ca(NO3)2 is 0.0158 M.

To know more about electrolyte

brainly.com/question/29771118

#SPJ11

The net ionic equations are as follows:

a. [tex]OH^-(aq) + H^+(aq)[/tex] → [tex]H_2O(l)[/tex]

b. [tex]Ca(s) + 2H^+(aq)[/tex] → [tex]Ca^{2+}(aq) + H_2(g)[/tex]

c. [tex]Ca + 2HCl + 2H_2O[/tex] → [tex]Ca(OH)_2 + H_2[/tex]

a. The neutralization of NaOH with HCl can be represented by the following balanced chemical equation:

NaOH + HCl → NaCl + [tex]H_2O[/tex]

To write the net ionic equation, we need to show only the species that are involved in the chemical reaction. The complete ionic equation is:

[tex]Na^+(aq) + OH^-(aq) + H^+(aq) + Cl^-(aq)[/tex] → [tex]Na^+(aq) + Cl^-(aq) + H_2O(l)[/tex]

The net ionic equation is:

[tex]OH^-(aq) + H^+(aq)[/tex] → [tex]H_2O(l)[/tex]

b. The dissolution of calcium in acid can be represented by the following balanced chemical equation:

Ca + 2HCl → [tex]CaCl_2 + H_2[/tex]

To write the net ionic equation, we need to show only the species that are involved in the chemical reaction. The complete ionic equation is:

[tex]Ca(s) + 2H^+(aq) + 2Cl^-(aq)[/tex] → [tex]Ca^{2+}(aq) + 2Cl^-(aq) + H_2(g)[/tex]

The net ionic equation is:

[tex]Ca(s) + 2H^+(aq)[/tex] → [tex]Ca^{2+}(aq) + H_2(g)[/tex]

c. The dissolution of calcium in water can be represented by the following balanced chemical equation:

[tex]Ca + 2H_2O[/tex] → [tex]Ca(OH)_2 + H_2[/tex]

To combine equations a and b so they result in equation c, we can first write the net ionic equation for the neutralization of NaOH with HCl:

[tex]OH^-(aq) + H^+(aq)[/tex] → [tex]H_2O(l)[/tex]

Then, we can substitute [tex]OH^-[/tex] with Ca and [tex]H^+[/tex] with 2HCl from the net ionic equation for the dissolution of calcium in acid:

[tex]Ca(s) + 2H^+(aq)[/tex] → [tex]Ca^{2+}(aq) + H_2(g)[/tex]

The resulting equation is:

[tex]Ca + 2HCl + 2H_2O[/tex] → [tex]Ca(OH)_2 + H_2[/tex]

which represents the dissolution of calcium in water.

For more such questions on Net ionic equation.

https://brainly.com/question/22885959#

#SPJ11

When CH3CH2OH is refluxed with acidified potassium dichromate(VI), the final product that is formed is CH3COOH, which is also known as acetic acid.

This reaction is commonly used in organic chemistry as a test for primary alcohols, as they are oxidized to aldehydes and then to carboxylic acids, while secondary alcohols are oxidized to ketones. Potassium dichromate(VI) acts as an oxidizing agent in this reaction, meaning that it accepts electrons from the alcohol and becomes reduced to a different compound. The reaction proceeds through several steps, including the formation of aldehydes and eventually the carboxylic acid. Therefore, the correct answer to the question is option C, CH3COOH. It is important to note that this reaction should be carried out in a fume hood or with proper ventilation, as the use of potassium dichromate(VI) can be dangerous due to its toxicity and potential to form harmful gases.

Learn more about potassium dichromate here

https://brainly.com/question/14049010

#SPJ11

Water molecules surround solute molecules. Option B

The principle of "like dissolves like" states that non-polar chemicals are soluble in non-polar solvents and polar compounds are soluble in polar solvents.

Water can only dissolve other polar solutes since it is a polar solvent; it cannot dissolve non-polar solutes.

The polar molecules that surround the polar solutes when they are dissolved in water are separated when they do so because of the high dielectric constant of water.

Learn more about water solvation:https://brainly.com/question/1118783

#SPJ1

Missing parts;

Which statement accurately describes part of the dissolving process of a polar solute in water?

Solute molecules repel water molecules.

Water molecules surround solute molecules.

Water molecules are strongly attracted to nonpolar substances.

Solute molecules remain concentrated in one part of the solvent.