the ability to keep an object in the center of your field of view when moving from one objective to another is called:

0.005 m/s^2 is the tangential acceleration of an ant in the rotating wheel if it is located at 0.20 cm from the wheel’s center in m/s.

The tangential acceleration of an object on a rotating wheel can be calculated using the following formula:

Tangential acceleration = angular acceleration x radius

Where "angular acceleration" is the angular acceleration of the wheel in radians per second per second (rad/s^2), and "radius" is the distance from the center of the wheel to the object in meters (m).

Given that the angular acceleration of the car's wheel is 2.5 rad/s^2 and the distance of the ant from the center of the wheel is 0.20 cm, we can calculate the tangential acceleration as follows:

radius = 0.20 cm / 100 cm/m = 0.0020 m

tangential acceleration = 2.5 rad/s^2 x 0.0020 m = 0.005 m/s^2

Therefore, the tangential acceleration of an ant located at 0.20 cm from the center of the wheel is 0.005 m/s^2.

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

The magnitude of the charge on each sphere can be calculated using Coulomb's Law, which states that the force between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.

In this case, we can rearrange the equation to solve for the charge, Q:

Q = √(Fd2/k),

where F is the force (22 mN), d is the distance (16 mm), and k is Coulomb's constant (8.99 x 109 Nm2/C2). Plugging in the values, we get:

Q = √(22 x 10-3 N x 16 x 10-3 m2/8.99 x 109 Nm2/C2)

Q = 0.087 C.

Therefore, the magnitude of the charge on each sphere is 0.087 C.

Learn more about Styrofoam packing material:

https://brainly.com/question/13707601

#SPJ4

The equivalent capacitance of the combination of a 10.0-μf capacitor, a 30.0-μf capacitor, and a 100-μf capacitor are connected in parallel across a 9.00-v battery is 140μf.

Given the capacitance of first capacitor (C1) = 10.0-μf

The capacitance of second capacitor (C2) = 30.0-μf

The capacitance of third capacitor (C3) = 100-μf

The voltage of battery (V) = 9V

We know when capacitors are connected in parallel then the equivalent capacitance is equal to sum of the capacitances of the capacitors.

Such that Ceqv = C1 + C2 +  C3

Then, Ceqv = 10-μf  + 30-μf  + 100-μf

Ceqv = 140-μf

Formula q=CV, where q is the charge stored, C is the capacitance, and V is the applied voltage, describes this relationship.

The charge on capacitor C1 = q1 = C1/V = 10/9 = 1.1C on C2 = 30/9 = 3.3C

and C3 = 100/9 = 11.1C

To learn more about capacitance click here https://brainly.com/question/14746225

#SPJ4

67.65 x 10^5J work is done by the battery charger to recharge a 15.0 v battery, a battery charger must move 4.51×105 c of charge from the negative terminal to the positive terminal.

Given the voltage of battery (V) = 15V

The charge in battery (q) = 4.51×10^5C

The charge moves from negative terminal to the positive terminal.

Let the work done by the battery charger = W

We know that the work done = voltage x charge.

Such that W = qV

W = 15 x 4.51×10^5 = 67.65 x 10^5J

Hence the required work done by the battery charger to move the charge from negative terminal to positive terminal is 67.65 x 10^5J.

To learn more about voltage click here https://brainly.com/question/13521443

#SPJ4

For a particle moving in a given direction, its position, velocity, and acceleration can each be equal to zero at most once in its motion.

Bin 1: None of position, velocity, or acceleration equal to zero

Bin 2: One of position, velocity, or acceleration equal to zero

Bin 3: Two of position, velocity, or acceleration equal to zero

Bin 4: All of position, velocity, and acceleration equal to zero

The specific number of times that position, velocity, and acceleration are equal to zero for a particle depends on the nature of its motion. For example, if a particle is moving with a constant velocity, its acceleration will be equal to zero at all times, but its position and velocity may not be equal to zero.

On the other hand, if a particle is moving in a simple harmonic motion, its position, velocity, and acceleration will each be equal to zero twice in one complete cycle of motion. So, the number of times a particle's position, velocity, and acceleration are equal to zero depends on the specific details of its motion and can vary widely.

To learn more about particles

https://brainly.com/question/2288334

#SPJ4

Terry runs 8800 yards, if he runs five miles every morning.

1 mile is equals to 1760 yeards

1 mile = 1760 yards

So 5 miles = 1760 × 5 = 8800 yards

So he runs 8800 yards every morning.

Miles: A mile is a unit of length or distance in the imperial and US customary systems of measurement. It is currently described as 1760 yards, 5,280 feet, or exactly 1,609.344 meters. It is denoted by mi or m.

Yards: This is a unit of measurement which is equal to 3 feet or 91.4 cm. This unit is mostly used by English-speaking countries.

To know more about yards, here

https://brainly.com/question/28365360

#SPJ4

Southern hemisphere has fewer number of glaciers as compared to the northern hemisphere as the southern hemisphere due to the lesser amount of landmass.

The northern hemisphere, especially near the north pole has a large amount of ice sheets. The large amount of glaciers are attributable to its larger land mass.

The southern hemisphere, especially near the south pole and the continent of Antarctica has glaciers and ice sheets but the amount of glaciers found in the southern hemisphere are lesser in number as compared to northern hemisphere. This is because the southern hemisphere has a lesser landmass as compared to norther hemisphere and has more ocean.

To know more about glaciers here

https://brainly.com/question/1259705

#SPJ4

Answer:

Explanation:

Box 1:  heat, metals, independent

Box 2:  metals, insulators, dependent

Box 3:  attracted, metals, independent

She will hear 442.57 beats per second, if she plays the note with the same tuning fork and the speed of sound is 344 m/s.

Initial speed of sound in the flute, v₁ = 342 m/s

Speed after increasing the temperature inside the flute, v₂ = 344 m/s

Frequency of the note of the tuning fork, f₁ = 440 hz or 440 per secs

Let the wavelength of the sound wave, = λ

Let the frequency after increasing the temperature, = f₂

We know the relationship, speed = wavelength(λ) × frequency

342 = λ × 440

λ = 342/440

λ = 0.777 m

When the speed is increased to 344 m/s,

344 = 0.777 × f₂

f₂ = 344/0.777

f₂ = 442.57

So, she will hear 442.57 beats per second.

To know more about tuning fork, here

https://brainly.com/question/11811308

#SPJ4

The density of protons in the beam is 1.00 x 10¹⁰ protons per cubic meter.

This can be calculated using the equation density = current density / (charge of proton x velocity), where the charge of the proton is 1.60 x 10⁻¹⁹ Coulombs and the velocity is 1.00 x 10⁵ m/s.

The density of a beam of protons can be affected by a number of factors, such as the beam current, the particle energy, and the number of protons in the beam. As the beam current (the rate of protons moving through the beam) increases, the density of protons in the beam increases, and vice versa.

Learn more about Coulombs law:

https://brainly.com/question/26892767

#SPJ4

The height of the building is 40.4 m.

The height of the building can be determined using the equation for vertical motion with constant acceleration.

The acceleration due to gravity is -9.8 m/s^2.

The equation for vertical motion with constant acceleration is:

y = v0t + 1/2at^2

where y is the height of the building,

v0 is the initial velocity,

t is the time, and

a is the acceleration.

We are looking for the height of the building, so y is the unknown variable. We know the initial velocity (v0 = 30 m/s), the time (t = 2.0 s), and the acceleration (a = -9.8 m/s^2).

Plugging in the values, we get:

y = 30 m/s * 2.0 s + 1/2 * -9.8 m/s^2 * (2.0 s)^2

= 60.0 m - 19.6 m

= 40.4 m

For more questions on equation for vertical motion

https://brainly.com/question/27526920

#SPJ4

The fabric of the convertible roof of the car flows upward as the The air pressure inside the car is greater than the pressure outside.

The Bernoulli's equation, as we are all aware, states that for a fluid flowing without resistance or turbulence, the product of the fluid's kinetic energy density, gravitational potential energy density, and pressure P is a constant.

The following is what the Bernoulli equation for airflow over and around any surface says. Lower velocity air flow regions have higher pressure and the contrary. Consider the fact that the air is travelling at varying rates both outside and inside the convertible. The air inside the convertible is moving more quickly than the air outside.

A pressure zone is produced as a result of the difference in pressures between the convertible's interior and exterior. The convertible roof bulged upwards, which is why this area, which is placed just below the surface of the roof, is there.

The question is incomplete. The complete question is 'Why does the fabric convertible roof of the car flow upward when the car is moving?'

To know more about convertible roofs:

https://brainly.com/question/15970167

#SPJ4

She can use the Hamilton method to divide Cadbury chocolate bars based on how much time they spent on household chores by adding total chore time, and then divide total chocolate bars by total chore time to find bar/minute of work, which will then be distributed.

The Hamilton method is a way of fairly dividing a set of items among a group of people based on the amount of work each person has done.

In this case, the mother plans to distribute 35 identical Cadbury chocolate bars based on the number of minutes each child spent doing household chores. To do this, she would first add up the total minutes of chores done by all four children. Then, she would divide the total number of chocolate bars by the total minutes of chores done to find the number of chocolate bars per minute of work. Finally, she would give each child a number of chocolate bars equal to the number of minutes of chores they completed multiplied by the number of chocolate bars per minute of work. This would result in a fair distribution of the chocolate bars based on the amount of work each child did.

Learn more about Hamilton method here:

https://brainly.com/question/24180735

#SPJ4

The pressure in the wider section of the pipe is 104105 pa.

Velocity at the thinner section, v₁ = 15 m/s

Velocity at the wider section, v₂ = 5 m/s

The pressure at the thinner section, p₁ = 4105 pa

Let the pressure at the thinner section, = p₂

Density of water, ρ = 1000 kg/m³

By applying Bernoulli's theorem for horizontal pipe

h₁ + p₁ + 0.5ρv₁² = h₂ + p₂ + 0.5ρv₂²

For horizontal pipe h₁ = h₂

4105 + 0.5×1000×15² = p₂ + 0.5×1000×5²

p₂ = 4105 + 112500 - 12500

On solving p₂ = 104105 pa

To know more about Bernoulli's theorem, here

https://brainly.com/question/2249706

#SPJ4

Explanation:

To determine the depth to which the bullet will penetrate the block in the second case, we need to know the initial velocity of the bullet and the coefficient of restitution of the block. The coefficient of restitution is a measure of how much energy is lost during an impact and it depends on the properties of the block and the bullet. Without this information, we cannot calculate the depth of penetration.

The Answer Is 210 J

So

W= (K.E)f -(K.E)i

=1/2mv2^2 -1/2mv1^2

= 1/2m(v2_v1)^2

put values

W= 1/2×20(2^2_5^2)

W= 1/2×20×_21

W= 210J

The current in a highway traffic flow study at a density of 50 vehicles per mile (vpm) or passenger cars per mile per lane (pcpmpl) can be calculated by dividing the charge of each car by the average speed. Assuming each car carries a charge of 1 mc, the current at 50 vpm would be calculated as follows:

Current = 1/Average Speed

At 50 vpm, the average speed is nearly constant, so the current would be equal to 1/Average Speed. This can be simplified to 1/50, so the current at 50 vpm would be 0.02 mc.

Learn more about flow of traffic flow on highways:

https://brainly.com/question/26703607

#SPJ4

This is because the Milky Way Galaxy is incredibly large and contains an estimated 200-400 billion stars, which is too many to be seen from Earth with the current technology.

Furthermore, the Milky Way is also estimated to be 100,000 light years across, meaning that even if we could see all the stars at once, the distant stars would be too faint to be seen from Earth.

To put it into perspective, if we could see all the stars, it would look like a giant, fuzzy patch of light in the night sky.

Learn more about the Milky Way Galaxy:

https://brainly.com/question/1587314

#SPJ4

The correct statements are The Milky Way is a spiral galaxy, The Sun is a star, Earth and most of the other planets orbit the Sun in nearly circular elliptical orbits, Galaxies are composed of billions of stars, Clouds, filaments, and walls are structures within galaxies.

The Milky Way is indeed a spiral galaxy, which means it has a flat disk-like structure with a central bulge and spiral arms. It is one of the many galaxies in the observable universe, each of which contain billions of stars, dust, and gas. Our Sun is one of these stars, located in the outer reaches of the Milky Way's disk. The Sun is the center of our solar system, and Earth and most of the other planets orbit around it in nearly circular elliptical orbits.

Galaxies can have various shapes, ranging from elliptical to spiral, and their structures can be described as clouds, filaments, and walls. Clouds refer to large concentrations of gas, dust, and stars that are loosely bound together. Filaments are elongated structures composed of gas, dust, and dark matter, and walls are large, dense regions of stars and galaxies that are separated by voids. These structures are important in our understanding of how galaxies form and evolve over time.

The statement "The Sun is not part of the Milky Way" is incorrect. The Sun is part of the Milky Way galaxy.

The statement "Earth rotates around the Sun, which is the reason we see the Sun rise and set" is incorrect. Earth rotates on its axis, which causes the appearance of the Sun rising and setting. The Earth's orbit around the Sun is much slower and causes the changing of the seasons, not the daily rising and setting of the Sun.

To know more about spiral please refer:

https://brainly.com/question/13074009

#SPJ4

The complete question is:

You have learned where Earth is in relation to the sun, other planets and galaxies. Based on what you learned, select all of the correct statements from the following list. The Milky Way is a spiral galaxy. The sun is a star. The sun is not part of the Milky Way. Earth and most of the other planets orbit the sun in nearly circular elliptical orbits. Clouds, filaments, and walls are structures within galaxies. Earth rotates around the sun, which is the reason we see the sun rise and set. Galaxies are composed of billions of stars.

At constant speed of 48 km/h should he drive to arrive just in time.

A thing is said to be moving at a constant speed when it covers the same distance in the same amount of time. When moving at a constant speed, an object covers a predetermined distance in the same amount of time. S = dt is a formula that can be used to express the speed.

Let distance be x

and time which he will arrive at right time be t

We know that speed = distance/time

so,

40 = x/t+1

x = 40(t+1)

and

60 = x/t-1

x = 60(t-1)

As x is same in both case lets cancel it out

60(t-1) = 40(t+1)

60t -60 = 40t +40

60t - 40t = 40 +60

20t = 100

t = 100/20

t = 5 hours

Now for distance

x = 40(5+1)

x = 40(6)

x = 240 km

Constant speed =  240/5

                           = 48 km/h

Thus, at constant speed of 48 km/h should he drive to arrive just in time.

Learn more about constant speed

https://brainly.com/question/24086165

#SPJ4

Two objects, with different sizes, masses, and temperatures are placed in thermal contact. The direction of flow of energy is from the hotter body to the cooler body.

Heat is a form of energy that gets transformed from one body to another. This transfer of energy in the form of heat or thermal contact mainly occurs from the body with more heat energy or higher temperature to the body with lower heat energy or low temperature. Suppose a hotter body and a cooler body are kept in contact with each other, then heat flows from the hotter to the cooler body. Hence when two objects with different temperatures are placed in thermal contact, then heat energy flows from the object with a higher temperature to the object with having a lower temperature. Different sizes and masses do not matter in the heat or energy flow.

For further learning about heat energy, refer to the link below: https://brainly.com/question/20038450

#SPJ4

0.623 meters from the speaker to achieve a sound intensity 11.5 dB louder than the current position.

The inverse square law states that the sound intensity decreases as the square of the distance from the source increases. Mathematically, it can be expressed as:

I₂ = I₁ × (r1/r₂)²

where:

I₁ is the initial sound intensity,

I₂ is the desired sound intensity,

r₁ is the initial distance, and

r₂ is the desired distance.

In this case, the sound intensity is 11.5 dB louder, which corresponds to a factor of [tex]10^(11.5/10) = 14.125[/tex] in terms of intensity.

I₂ = 14.125 × I1

Now, set up the equation using the inverse square law:

14.125 × I₁ = I₁ × (r₁/r₂)²

14.125 = (r₁/r₂)²

Taking the square root of both sides:

[tex]\sqrt{14.125}[/tex]= r₁/r₂

Solving for r₂ (desired distance), we have:

r₂ = r₁ / [tex]\sqrt(14.125)[/tex]

Substituting the given distance r₁ = 2.37 m into the equation, calculate r₂:

r₂ = 2.37 / [tex]\sqrt{(14.125)}[/tex]

= 0.623 m

To learn more about sound intensity, follow the link:

https://brainly.com/question/32194259

#SPJ12

The resultant velocity of the car will be: 58.52 mi/h

It is a physical quantity that indicates the displacement of a mobile per unit of time, it is expressed in units of distance per time, for example (miles/h, km/h).

The formula and procedure we will use to solve this problem is:

vr = √(va² + vb²)

Where:

Information about the problem:

Applying the resultant velocity formula we get:

vr = √[(55 mi/h)² + (20 mi/h ²)]

vr= √3425 mi²/h²

vr= 58.52 mi/h

Learn more about velocity at: brainly.com/question/3004254

#SPJ4

The point with the greatest magnitude electric field is "x = 1 m". Correct option is a.

Electric field is a vector quantity that describes the force experienced by a unit positive charge placed at a particular point in space. The magnitude of the electric field at a point is proportional to the force experienced by a unit positive charge placed at that point.

In this problem, the electric field at a point on the x-axis is given by the sum of the electric fields produced by each of the three positive charges. Since each charge produces an electric field that decreases with distance, the electric field produced by a single charge will be strongest at points closest to that charge.

Therefore, the point with the greatest magnitude electric field will be the one that is closest to the charge that produces the strongest electric field. In this case, that charge is the one at the origin (x = 0 m), so the point with the greatest magnitude electric field will be x = 1 m.

To learn more about electric field visit:

https://brainly.com/question/8971780#

#SPJ11

By applying the fundamental frequency concept, it can be concluded that the frequency of the fundamental is 50 Hz.

The fundamental frequency is the lowest frequency of a periodic waveform counting from zero.

At the  [tex]n^{th}[/tex] harmonic, the frequency is n times the fundamental frequency.

fₙ = nf₁ , where

f₁ = fundamental frequency

We have two successive overtones, let's denote them with fₙ and fₙ₊₁. The difference between their frequencies is given by:

fₙ₊₁ - fₙ = (n+1)f₁ - nf₁

          = nf₁ + f₁ - nf₁

          = f₁

It implies that the difference is equal to the fundamental frequency.

Now we can use this conclusion to calculate the fundamental frequency of the string:

f₁ = fₙ₊₁ - fₙ

  = 350 - 300

  = 50 Hz

Thus, the frequency of the fundamental is 50 Hz.

To learn more about fundamental frequency, click here: https://brainly.com/question/27909442

#SPJ4

The net force that accelerates the baseball with the mass of 0.09 kg and with the acceleration of 2,800 m/s² is equal to 252 newtons.

Force that acts on an object can create acceleration. We know this from Newton's second law of motion, which is a = F/m, where a is acceleration, F is force, and m is mass. The equation means that the larger the force or the smaller the mass, the larger the acceleration, and the smaller the force or the larger the mass, the smaller the acceleration.

We can rearrange the equation into F = ma. This means that force is equal to the mass times the acceleration. Given that the mass is equal to 0.09 kg and the acceleration is equal to 2,800 m/s², the net force is equal to

F = ma

F = 0.09 kg · 2,800 m/s²

F = 252 kg · m/s² = 252 N.

Learn more about force at https://brainly.com/question/12785175.

#SPJ4

The period of a swing is determined by the length of the chain. For a playground swing set with a chain length of 3.2 m, the period of the swing can be calculated using the formula:

T = 2π√(L/g), where L is the length of the chain and g is the acceleration due to gravity (9.8 m/s2).

This gives a period of T = 2.59 s, expressed to two significant figures.

The length of the chain on a playground swing set determines the size of the arc of the swing and thus the period of the swing. The longer the chain, the greater the arc and the longer the period of the swing.

As the chain length increases, the period of the swing will increase as well. For a playground swing set with a chain length of 3.2 m, the resulting period is 2.59 s.

Learn more about The period of a swing:

https://brainly.com/question/20066519

#SPJ4

Net acceleration of an object refers to the total acceleration experienced by the object, taking into account all the forces acting on it.

It is the vector sum of all the individual accelerations caused by each force.

Net acceleration represents the rate of change of velocity of an object and determines the direction and magnitude of its motion.

If the net acceleration is upward, the object is accelerating upward, and if it is downward, the object is accelerating downward.

Net acceleration can be calculated using Newton's Second Law of Motion:

Force upward is 10 lbf

A = F/m = 10/50 = 0.2 m/s2 = 0.656 ft/s^2 of upward acceleration.

Downward acceleration = 32.2 feet per second.

Net acceleration is equal to g - a, which is 32.2 ft/s^2 - 0.656 ft/s2 = 31.544 ft/s^2.

Net downward acceleration is present.

To know more about  Net acceleration of an object  visit:

https://brainly.com/question/14595597

#SPJ4

C. Positively and negatively charged objects both experience equal magnitude forces due to the electric field, but in opposite directions.

Electric fields produce a force on charged objects. According to Coulomb's law, the magnitude of the electric force is directly proportional to the magnitude of the charge on the object and inversely proportional to the square of the distance from the charge to the object.

When a charged object is placed in an electric field, it experiences a force in the direction of the electric field. If the charge on the object is positive, the force acts in the direction of the electric field. If the charge on the object is negative, the force acts against the direction of the electric field.

Therefore, both positively and negatively charged objects experience equal magnitude forces due to the electric field, but in opposite directions. The force on a positively charged object is in the direction of the electric field, while the force on a negatively charged object is against the direction of the electric field.

To learn more about electric field visit:

https://brainly.com/question/15800304#

#SPJ11