Yes, that is correct. The angular speed of Earth is 1.99 x 10-7 radians per second. This is equal to 2π radians per year, or 1 revolution per 365.25 days.
The angular speed of the Earth is the rate at which it rotates around its own axis. It is measured in radians per second, and is typically expressed as 2π radians per day, or 7.27 x 10-5 rad/s. The angular speed of the Earth is constant, meaning that it does not change over time. This is important, as it allows us to measure the length of a day and use this to calculate the rate of other processes such as the seasons and the passage of time.
Learn more about The angular speed of Earth
https://brainly.com/question/1543128
#SPJ4
Which color of visible light has a shorter wavelength than blue light? O A. Red O B. Green O C. Violet OD. Orange A
Answer:
Violet
Explanation:
ROY G BIV
A ball is thrown straight up into the air, it falls back down, bounces off the floor and is caught at the same height it was released from. A. Draw the motion diagram. B. What is the velocity at the highest point? How do you know? (This is not a calculation. This is a concept question.)
A motion diagram of this scenario would show a ball being thrown upward and then falling back down, bouncing off the floor before being caught at the same height it was released from.
At the highest point, the ball would have a velocity of 0 m/s, since it has reached its maximum height and its velocity has changed from positive to negative.
This can be determined by the fact that the ball is momentarily at rest at the highest point, and the concept of conservation of energy, since the total energy of the ball must be conserved throughout the entire motion.
Learn more about A motion diagram:
https://brainly.com/question/26322996
#SPJ4
You collect some data on horse racing along a straight track. You are able to fit the motion of the horse to a function during this interval: ?? (?? )= 10??+ (5 ??/??^2)t^2 + (3 ??/??^3)t^3 where you’ve chosen a particular spot on the track to be your origin and started your clock (t = 0) when you started collecting this new data. a. What is the horse’s velocity as a function of time? Does the horse ever turn around during this time? b. What is its acceleration as a function of time?
From this equation, we can determine that the horse will never turn around during this time, since the equation is always increasing.
Physically, this equation describes the motion of the horse along a straight track.
The first term, 10, represents the horse's initial velocity. The second term, (5/2)t^2, represents the acceleration due to gravity, which is constant and causes the horse to accelerate as time passes. The third term, (3/6)t^3, represents the effects of air resistance, which increases with time, causing the horse to slow down as time passes.As a result, the overall effect of these three terms is that the horse accelerates as time passes until it reaches its maximum velocity, and then gradually slows down as it approaches the end of the track.
Learn more about the velocity:
https://brainly.com/question/24445340
#SPJ4
a stationary golf ball is hit by a club. while the club is in contact with the ball, the ball compresses, the club exerts maximum force when the ball is at maximum compression, and then the ball expands. the momentum of the golf ball after contact with the club is represented by the vector above. which of the following groups of vectors could represent the force exerted on the ball at the three moments described?
The momentum of the gold ball that represents the force exerted on the ball at the three moments described is vector B.
Momentum is a vector quantity resulted from the mass of a particle and its velocity. Momentum represents the force acting on the particle. Momentum is the implication of Newton's Second Law. Momentum can be formulated as:
P = m.v
where:
P = momentum
m = mass
v = velocity
Following the three moments, we can identify the vector that represent the force exerted on each moment. Let's discuss them further.
Once the golf ball is hit by a club from its stationary position, the force exerted on the golf ball will be in the same direction to the club movement. We assume in this case that the club hits the ball from the left to right. The force will move the ball from its stationary position to the right.
Once the ball is at maximum compression, the force is also at its maximum point. The direction of the force remains as the previous moment.
Lastly, once the ball starts to expand, the force declines. The ball will come to its end position once the momentum of the force becomes zero (0). The momentum of the force will decline since the force direction changes to the left as resulted of the frictional force from the air.
Learn more about Momentum here: brainly.com/question/6782063
#SPJ4
Complete Question:
A stationary golf ball is hit by a club. while the club is in contact with the ball, the ball compresses, the club exerts maximum force when the ball is at maximum compression, and then the ball expands. the momentum of the golf ball after contact with the club is represented by the vector above. which of the following groups of vectors could represent the force exerted on the ball at the three moments described?
(Please refer to the picture attached below)
a parallel-plate capacitor is connected to a battery. the energy of the capacitor is U. the capacitor is then disconnected from the battery and the plates are slowly pulled apart until the plate separation doubles. the new energy of the capacitor is U. find the ratio U/U.
For the given set of information the value of U/U' ratio will be 4
When two parallel plates are placed over a battery and separated by a certain distance, the given plates begin to charge progressively and an electric field is created between them.
The energy stored in a parallel-plate capacitor is given by the formula:
U = 0.5 * C * V^2
where C is the capacitance of the capacitor and
V is the voltage across the capacitor.
When the plate separation doubles, the capacitance of the capacitor is reduced to one-quarter of its original value.
Since the voltage across the capacitor remains constant, the new energy stored in the capacitor becomes:
U' = 0.5 * (C/4) * V^2
= 0.5 * C * V^2 / 4
= U / 4
For more questions on Parallel plate capacitor
https://brainly.com/question/27164418
#SPJ4
if an external force rotates the dipole from position b to position a, what happens to the pe of the dipole?
If an external force rotates the dipole from position b to position a, the pe of the dipole is said to be in stable equilibrium.
What is a dipole?A dipole in physics is an electromagnetic phenomenon that can happen in one of two ways:
An electric dipole separates the positive and negative electric charges that can be found in any electromagnetic system. A pair of charges with the same magnitude but a different sign separated by a typically small distance serve as a straightforward illustration of this system. (An electret is a permanently erected electric dipole.)The closed circulation of an electric current system creates a magnetic dipole. A single loop of wire carrying a steady current is a straightforward illustration. A magnet with a permanent magnetic dipole moment is a bar magnet, for instance.Let the dipole is kept in two positions (a) and (b) in constant electric field Eo.
Case (a) : Angle between dipole and the electric field θ=0o
Potential energy of dipole U=−PEo cosθ
∴ U=−PEo cos0o =−PEo
Thus the dipole is said to be in stable equilibrium.
Torque τ=PEo sinθ
∴ τ=PEo sin0o = 0
Thus, if an external force rotates the dipole from position b to position a, the pe of the dipole is said to be in stable equilibrium.
Learn more about dipole
https://brainly.com/question/14195217
#SPJ4
From what height h above the bottom of your window was the flower pot dropped? express your answer in terms of lw , t , and g .
The height h above the bottom of the window can be expressed as h = (1/2)gt² + lw, where g is the acceleration due to gravity, t is the time the flower pot was in the air, and lw is the length from the bottom of the window to the top of the windowsill.
In order to determine the height from which a flower pot was dropped, information about the length of the window (lw), the time it took for the flower pot to fall (t), and the acceleration due to gravity (g) would be needed.
The formula for determining the height from which an object was dropped is given by h = (1/2)gt², where h is the height, g is the acceleration due to gravity, and t is the time it took for the object to fall.
Using the values for lw, t, and g, the height from which the flower pot was dropped can be calculated. The height will be expressed in terms of lw, t, and g.
Learn more about the free fall equations:
https://brainly.com/question/17960310?referrer=searchResults
#SPJ4
is the statement the system is at equilibrium synonymsous with the statement chemical transformations are no longer occuring in the system
The statement "the system is at equilibrium" and the statement "chemical transformations are no longer occurring in the system" are not synonymous.
In a chemical system, "equilibrium" refers to a state in which the rate of the forward reaction is equal to the rate of the reverse reaction. At this state, the concentration of the reactants and products remains constant, but the chemical reactions are still occurring, just at a slower rate.
On the other hand, "chemical transformations are no longer occurring in the system" would imply that there is no chemical reaction happening at all.
So while it is possible for a system to be at equilibrium and for chemical transformations to no longer be occurring, they are not the same thing. It's also possible for a system to be at equilibrium but for chemical transformations to still be occurring, just at a slower rate.
To know more about chemical transformations, here
https://brainly.com/question/28522480
#SPJ4
Let Q represent a mass of radioactive plutonium (239Pu) (in grams), whose half-life is 24,100 years. The quantity of plutonium present after t years is Q = 16(1/2)^t/24100 Determine the initial quantity (when t = 0)
The mass of the plutonium at the beginning is 16 g.
What is the initial quantity of the plutonium?We have to note that the element that we call plutonium is radioactive and the implication of that is that the element would be able to decompose with time and then the amount of the plutonium would reduce.
Now we have that;
Q = 16(1/2)^t/24100
Q = Amount of the plutonium
t = The time that is taken.
We have been told in the question that t =0 Hence;
Q = 16(1/2)^0/24100
Q = 16 * 1
Q = 16 g
Learn more about plutonium:https://brainly.com/question/8052332
#SPJ1
A student throws a water balloon vertically downward from the top of a building. The balloon leaves the thrower's hand with a speed of 5.70 m/s. Air resistance may be ignored, so the water balloon is in free fall after it leaves the thrower's hand.a) What is its speed after falling for 2.00 s?b) How far does it fall in 2.00 s?c) What is the magnitude of its velocity after falling 10.0 m?How do I sketch a-1, V-t, and yet graphs for the motion of the balloon?
Speed after falling for 2.30 seconds = 37.74 m/s. The water balloon drops 60.88 meters in 2.3 seconds. The speed following an 11.0 m fall is 21.13 m/s
Find the velocity?Using the motion equations
g = 9.8 m/s²
Initially moving at 15.2 m/s
velocity at t = 2.3 seconds.
a) v = u + gt
v = 15.2 + 9.8×2.3
v = 37.74 m/s
y = ut + gt2/2 (b)
y = (15.2×2.3) + 9.8(2.3²)/2
y = 60.88 m
c) v² = u² + 2g
v² = 15.2² + (2×9.8×11)
v = 21.13 m/s
Speed after falling for 2.30 seconds = 37.74 m/s. The water balloon drops 60.88 meters in 2.3 seconds. The speed following an 11.0 m fall is 21.13 m/s
To learn more about velocity refer
https://brainly.com/question/14768536
#SPJ4
choose the correct explanation why does the statement make sense (or is clearly true) or does not make sense (or is clearly false): nasa will soon launch a spaceship that will photograph our milky way galaxy from beyond its halo. choose
The statement doesn't make sense. Even if NASA could build a spaceship that traveled close to the speed of light, it would take tens of thousands of years to get into the halo and then the same time for image to get back to Earth. Option C is the correct answer.
For a spaceship to the milky way galaxy, it should travel with the speed of light.
And even if we could build a spaceship that traveled close to the speed of light, it would take tens of thousands of years to reach into the halo to photograph the disk, and then tens of thousands of years more for the picture to be transmitted back to Earth.
Therefore, Option C is the correct explanation.
---The complete question is,
Choose the correct explanation why does the statement make sense (or is clearly true) or does not make sense (or is clearly false):
NASA will soon launch a spaceship that will photograph our Milky Way Galaxy from beyond its halo.
A) The statement makes sense. If NASA can build a spaceship that will travel close the speed of light, it would take reasonable time, such as hundred years, to get into the halo to photograph the disk, and the same time for image to get back to Earth.
B) The statement doesn't make sense. At the speed of the current spaceships, it would take tens of thousands of years to get into the halo of Milky Way, though reasonable time, such as hundred years, is needed for image to get back to Earth.
C) The statement doesn't make sense. Even if NASA could build a spaceship that traveled close to the speed of light, it would take tens of thousands of years to get into the halo and then the same time for image to get back to Earth.
D) The statement doesn't make sense. NASA need to build a spaceship that able to travel close to the speed of light to get into the halo of Milky Way in reasonable time, such as hundred years. it's well beyond the current technology. ---
To know more about the milky way, here
brainly.com/question/2806083
#SPJ4
after landing on an unfamiliar planet, a space explorer constructs a simple pendulum of length 51.0 cmcm . the explorer finds that the pendulum completes 101 full swing cycles in a time of 136 ss .part awhat is the magnitude of the gravitational acceleration on this planet?express your answer in meters per second per second.view available hint(s)for part aactivate to select the appropriates template from the following choices. operate up and down arrow for selection and press enter to choose the input value typeactivate to select the appropriates symbol from the following choices. operate up and down arrow for selection and press enter to choose the input value typegplanetgplanet
The magnitude of the acceleration due to gravity of the planet is 11.06 m/s², if the pendulum completes 101 full swing cycles in 136 seconds.
Length of the pendulum, l = 51.0 cm = 0.51 m
Time taken to complete 101 full swings cycle is 136 seconds, so
Time period of the pendulum, T = 136/101 = 1.35 sec
Let the value of gravitational acceleration on the planet, = gₓ
We know the equation of simple pendulum is: T = 2π√(l/g)
1.35 = 2π√(0.51/g)
Squaring of both sides,
1.35² = (2π)²×(0.51/gₓ)
1.82 = 20.13/gₓ
gₓ = 20.13/1.82
gₓ = 11.06 m/s²
--The given question is incorrect, the correct question is:
"after landing on an unfamiliar planet, a space explorer constructs a simple pendulum of length 51.0 cm . the explorer finds that the pendulum completes 101 full swing cycles in a time of 136 s. What is the magnitude of the gravitational acceleration on this planet? Express your answer in meters per second per second."--
To know more about acceleration, here
https://brainly.com/question/12550364
#SPJ4
b) Why should Physics be studied?
Answer:
Physics helps us to understand how the world around us works, from can openers, light bulbs and cell phones to muscles, lungs and brains; from paints, piccolos and pirouettes to cameras, cars and cathedrals; from earthquakes, tsunamis and hurricanes to quarks, DNA and black holes.
Explanation:
Oummm guys sorry if i dont have my examples
Answer:
physics contribute to the technology infrastructure
A baseball pitcher throws the ball in a motion where there is rotation of the forearm about the elbow joint as well as other movements. If the linear velocity of the ball relative to the elbow joint is 20.0 m/s at a distance of 0.480 m from the joint and the moment of inertia of the forearm is 0.500 kg ⋅ m2 , what is the rotational kinetic energy of the forearm?
The rotational kinetic energy of the forearm is 41.7 J.
What is kinetic energy?Kinetic energy is a form of energy that is associated with the motion of an object. It is the energy that an object has due to its motion. Kinetic energy can be calculated by multiplying half of the object’s mass with the square of its velocity. The SI unit of kinetic energy is Joules (J). Kinetic energy is used in many different fields such as physics, engineering, and thermodynamics.
The rotational kinetic energy of the forearm can be calculated using the equation KErot = (Iω^2) / 2, where I is the moment of inertia and ω is the angular velocity.
The angular velocity can be calculated by dividing the linear velocity (v) by the radius (r): ω = v/r.
Therefore, the rotational kinetic energy of the forearm is:
KErot = (Iω^2) / 2 = (0.500 kg ⋅ m2) * ((20.0 m/s) / (0.480 m))^2 / 2 = 41.7 J
To learn more about kinetic energy
https://brainly.com/question/30337295
#SPJ4
The arm of a crane at a construction site is
18.0 m long, and it makes an angle of 13.5
◦
with the horizontal. Assume that the maximum load the crane can handle is limited
by the amount of torque the load produces
around the base of the arm.
What maximum torque can the crane withstand if the maximum load the crane can
handle is 521 N?
Answer in units of N · m.
002 (part 2 of 2) 10.0 points
What is the maximum load for this crane at
an angle of 25.8
◦ with the horizontal?
Answer in units of N.
Maximum torque can the crane withstand is 6603.8 N·m. The maximum load for this crane at an angle of 25.8 with the horizontal is 461.5 N
What is the crane's maximum load and torque?The link between torque, force, and angle serves as the theoretical foundation for this inquiry.
The sine of the angle formed by the force and the lever arm and the product of the force times the length of the lever arm are used to calculate torque. This means that the length of the lever arm and the angle at which the force is applied can both affect how much torque is generated.
The steps are as follows to get the answer:
Calculate the maximum torque that the crane can withstand in step 1.
This can be done by adding the sine of the angle the arm makes with the horizontal (13.5°) to the length of the arm (18.0 m) and the maximum load (521 N).
Torque is defined as: 521 N x 18.0 m x sin (13.5°) = 6603.8 N m.
Step 2: Determine the crane's maximum load at a 25.8-degree angle to the horizontal.
The maximum load (521 N) multiplied by the sine of the angle (25.8°) will achieve this.
The maximum load is equal to 521 N * sin (25.8°) = 461.5 N.
To learn more about torque refer :
https://brainly.com/question/19865132
#SPJ1
a light bulb connected to a battery is interrupted by a substance, which when dissolved has a molar smth of 1.0, all these substances work except for
A light bulb connected to a battery is interrupted by a substance, which when dissolved has a molar smth of 1.0, all these substances work except for electrolyte solution.
What is electrolyte solution?Electrolyte, in chemistry and physics, substance that conducts electric current as a result of a dissociation into positively and negatively charged particles called ions, which migrate toward and ordinarily are discharged at the negative and positive terminals (cathode and anode) of an electric circuit, respectively.
The most familiar electrolytes are acids, bases, and salts, which ionize when dissolved in such solvents as water or alcohol. Many salts, such as sodium chloride, behave as electrolytes when melted in the absence of any solvent; and some, such as silver iodide, are electrolytes even in the solid state.
Learn more about electrolytes
https://brainly.com/question/29771118
#SPJ4
True or False : The sketch of the millimeter scale as it appears using the low-power objective would appear larger than when using the scanning objective magnification.
True. The sketch of the millimetre scale as it appears using the low-power objective would appear larger than when using the scanning objective magnification.
What is magnification?Magnification is the process of enlarging something's apparent size—not its actual size. A calculated number, also known as "magnification," is used to measure this enlargement. When this number is less than one, it refers to a reduction in size, also known as magnification or de-magnification.
Magnification typically refers to enlarging visuals or images in order to see more detail, boosting resolution, using a microscope, printing methods, or digital processing. The perspective of the image is unaffected by magnification in every situation.
Optical magnification is a dimensionless number because it measures how an object's apparent size (or size in an image) compares to its actual size.
Learn more about magnification
https://brainly.com/question/21370207
#SPJ4
Analyzing Gravitational Data Quick Check
Students want to design an experiment to study gravity. They decide they will drop four objects with the same mass from
the top of their school's bleachers. They will time how long each object takes to reach the ground. How can they improve
confidence in the experiment's results? (1 point)
O Randomly select the order in which the objects are dropped.
O Drop each object 10 times and use the average of each object's fall times.
O Let a different student time the drop of each object.
O Drop all four objects at once.
The confidence level can be improved by; Drop each object 10 times and use the average of each object's fall times. Option B
How does gravity affect a falling body?Gravity affects a falling body by accelerating it towards the ground at a rate of 9.8 m/s^2 (on Earth's surface). The force of gravity is proportional to the mass of the body and the acceleration due to gravity, and it acts in the direction of the center of the Earth.
Hence the acceleration due to gravity is the acceleration that have been imparted to an object dur to the gravitational pull on the object.
Learn more about gravity:https://brainly.com/question/4014727
#SPJ1
on earth, with its atmosphere, which of these parts of the spectrum can astronomers view from the ground?
Astronomers can view the optical (visible light) portion of the spectrum from the ground.
Which of these spectrum regions can observers on the ground see?
Observers on the ground can see a range of different parts of the electromagnetic spectrum, including visible light, ultraviolet, infrared, and radio waves. Visible light is the light that human eyes are able to detect, and it is made up of the colors of the rainbow.
Ultraviolet light has a higher frequency than visible light, and it is sometimes referred to as "black light." Infrared radiation has a lower frequency than visible light, and it is responsible for making objects appear warm.
Finally, radio waves have the lowest frequency of all, and they are used to transmit data from place to place. All of these different parts of the electromagnetic spectrum can be observed by observers on the ground.
To learn more about electromagnetic spectrum refer :
https://brainly.com/question/25847009
#SPJ4
Consistent with the principle of neural representation, which of the following factors would be LEAST consequential in understanding our experience of seeing another person? a. electrical signals in one's optic nerve
b. electrical signals in one's brain
c. the image on one's retina
d. the light reflected from the other person
'Electrical signals in one's optic nerve' would be least consequential in understanding our experience of seeing another person.
What exactly do you mean by optic nerve?
The optic nerve is a bundle of nerve fibers that carries visual information from the retina to the brain. It is responsible for vision and is the nerve that connects the eye to the brain.
Electrical signals in one's optic nerve are the physical basis of vision, but they do not provide any information about the person being seen. This is because an electrical signal is just a representation of the light that hits the eye and does not provide any information about the person being seen. The actual experience of seeing another person is determined by a combination of factors, including the person's facial features, body language, and other visual cues.
Hence, option A is correct.
To know more about optic nerve,
https://brainly.com/question/15650561
#SPJ4
Sam walks 200M North it takes him 5 minutes what was his velocity
The velocity of Sam can be calculated by dividing the distance he covered by the time it took to cover the distance:
v = d / t
where d = 200m, t = 5 minutes = 5 * 60 = 300 seconds
v = 200 / 300 = 0.67 m/s
So Sam's velocity was 0.67 m/s North.
the small piston of a hydraulic lift has a crosssectional area of 2.4 cm2 and the large piston 276 cm2 . what force must be applied to the small piston for the lift to raise a load of 2.4 kn? (in service stations, this force is usually exerted by compressed air.) answer in units of n.
The force applied to the small piston should be 2400 N.
The force applied to the small piston is related to the force applied to the large piston by the ratio of their cross-sectional areas. This is known as Pascal's law, which states that pressure applied to a confined fluid is transmitted similarly this way and that.
The equation for the force applied to the large piston (F2) can be determined from the pressure applied to the small piston (F1) and their particular cross-sectional areas (A1 and A2):
F2 = (F1 * A2)/A1
We are given that F1 should be equivalent to the force required to raise a load of 2.4 kN, or 2400 N.
F2 = (2400 N * 276 cm^2)/(2.4 cm^2) = 240000 N
Hence, the force applied to the small piston should be 2400 N.
To learn more about Pascal's law:
https://brainly.com/question/4262025
#SPJ4
An orifice meter with orifice diameter 15cm is inserted in a pipe of 30 cm
diameter. The pressure difference measured by a mercury oil differential
manometer on the two sided of the orifice meter gives a reading of 50 cm of
mercury. Find the rate of flow of oil of specific gravity 0.9 when the coefficient
of discharge of the meter is 0.64.
A particular gravity oil will flow at a rate of 137.4 liters per minute.
Given that the pipe's diameter is 30 cm, the orifice's diameter is 15 cm, and their combined diameters are 0.15 and 0.32, respectively, Area A1 will be r2 = / 4 x (0.15)2 = 0.0176625.
Why is gravity a force, exactly?Gravity is a force in the broadest sense since it defines the resulting interaction between two masses. The stretching of spacetime and/or the movement of objects through it are the main origins of gravitational effects.
Is gravity based on actual events?Alfonso Cuarón, the director, declared, "This is not a documentary." It is a work of fiction. As a result, some aspects of the movie, such the Shuttle flights and Tiangong station, were purely artistic licenses.
To know more about Gravity visit:
https://brainly.com/question/9722860
#SPJ1
A linebacker with a mass of 94.53 kg is
running east with a speed of 6.62 m/s
to tackle a running back with a mass of
84.05 kg running south with a speed of
9.77 m/s. The linebacker collides with
the running back. What is the
combined speed of the linebacker and
running back after the collision?
The final velocity after the collision would be
When two objects collide, their momentum and energy are both conserved. To put it another way, the system's total energy and momentum are unaffected by the collision and are the same as they were before it. Elastic and inelastic collisions are the two categories of collisions that can occur. When the kinetic energy of a colliding object is not conserved but the momentum is, we get an inelastic collision.
A perfectly inelastic collision occurs when the colliding items remain stuck together and maintain the same velocity after the impact. The principle of conservation of momentum is used to calculate the after-collision velocity in a perfectly inelastic collision. It’s given by:
m₁v₁ + m₂v₂ = (m₁+m₂)v₃
(94.53×6.62) + (84.05×9.77) = (94.53 + 84.05) v₃
625.79 + 821.17 = 178.58 v₃
v₃ = (625.79 + 821.17) ÷ 178.58
v₃ = 8.10 m/s
To learn more about final velocity, click here:
https://brainly.com/question/29790718
#SPJ1
Which manifestation method is faster 369 or 777
Note that it is note clear which manifestation method (777 or 369) is faster. Note that "Manifestation Methods" is not Science and can even be considered a Hoax which seems to be gaining a lot of attention on social media.
What is a Manifestation Technique?A manifestation technique is a strategy or practice that uses the power of positive thoughts, visualization, and affirmations to bring one's wants or objectives into reality.
The goal is to direct one's energy and attention toward what one wishes to achieve, so cultivating a positive mentality and attracting wonderful events and experiences into one's life.
The manifestation technique has no set speed because it is based on human ideas and subjective experiences rather than a scientific or provable procedure. Both 369 and 777 are manifestation techniques with various proponents and procedures, but their efficacy cannot be compared because it is dependent on individual beliefs and experiences.
Learn more about Social Media:
https://brainly.com/question/30326484
#SPJ1
sodium phosphate, can be found in fast food, baked goods, processed meat, and other manufactured foods. Which element has the percentage composition of 39%?
Answer: Sodium phosphate is a chemical compound made up of the elements sodium, phosphorus, and oxygen. The percentage composition of each element can be found by determining the mass of each element in the compound and dividing it by the total mass of the compound.
In sodium phosphate, the percentage composition of sodium is 39%. This means that out of the total mass of the compound, 39% of it is made up of sodium atoms. The other elements, phosphorus and oxygen, make up the remaining 61% of the compound.
A student at the top of a building throws a red ball upward with speed v0 and then throws a blue ball downward with the same initial speed v0. Immediately before the two balls reach the ground, which of the following statements are true? (Choose all correct statements; neglect air friction.) (a) The speed of the red ball is less than that of the blue ball. (b) The speed of the red ball is greater than that of the blue ball. (c) Their velocities are equal.
(d) The speed of each ball is greater than v0. (e) The acceleration of the blue ball is greater than that of the red ball.
A student at the top of a building throws a red ball upward with speed v0 and then throws a blue ball downward with the same initial speed v0. Immediately before the two balls reach the ground. The true statement is (c) Their velocities are equal.
SPEED AND VELOCITY(Velocity) is a vector quantity that is a quantity that has a direction of motion while speed is a scalar quantity that is without considering the direction of motion.
Both speed and speed are measured in m/s, km/hour or miles/hour.
In daily application and use Speed is used to estimate the time needed by an object such as a vehicle to reach a certain distance while driving which can be observed in the movement of the speedometer. Whereas the Velocity scale is usually used to calculate the time needed by a storm to reach the coastline or other applications can be used to calculate the time needed for a rocket to reach the moon.
Learn more about velocity at https://brainly.com/question/18084516.
#SPJ4
Give three examples where an object's average speed is the same as its average velocity, and three where the two are different.
Velocity is a vector quantity and speed is a scalar quatity. This means that velocity changes with direction and speed does not.
What is speed and velocity?
Velocity is the pace and direction of an object's movement, whereas speed is the time rate at which an object is travelling along a path. In other words, velocity is a vector, whereas speed is a scalar value.
Three examples were velocity and speed are same:
A car moving in a straight line with constant speed will also have same velocity. A runner running in the straight track with constant speed will also have same velocity. A truck on a straight highway will have same average velocity and speed.Three examples were velocity and speed are different:
A car moving in a round road with constant speed will not have same velocity. A runner running in one round track with constant speed will not have same velocity. A truck going on a mountain will not have same average velocity and speed.To learn more about velocity, here
https://brainly.com/question/18084516
#SPJ1
What does an object with more mass require, according to Newton's second law of motion?
O more distance to accelerate
Oless speed to accelerate
O more force to accelerate
Oless force to accelerate
Thus according Newton's 2nd law of motion, heavier objects require more force to accelerate.
Describe a force.At this point, it's appropriate to refer to a force as a push or a pull. The idea of a force encompasses both living and non-living phenomena. Large particles are always in motion thanks to electrostatic and electric and magnetic forces, while the perturbation theory is always moving thanks to the weak and powerful nuclear forces.
In what ways does force combine?Given that it has both orientations and magnitude, a vector quantity describes a force. It is calculated and use the newton SI unit (N). F is the symbol for force (formerly P). In no particular sequence, the list includes gravity, electromagnetics, the moderate nuclear force, and in fact, the greater nuclear force.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ1
what, in general, does the thickness of sound absorbing material have to do with the material's ability to absorb particular sound frequencies? only one of these answers is completely true. group of answer choices the thicker the material, the more db of sound reduction happens, the same at all frequencies.
As with density, an increase in thickness improved the absorption of samples at low and medium frequencies. As thickness increased, the frequency of the maximum absorption coefficient shifted to lower frequencies, and the maximum absorption coefficient value decreased.
What is AbsorptionAbsorption refers to the process by which a material, structure, or object picks up energy when a wave is encountered, as opposed to reflecting the energy. Part of the absorbed energy is converted into heat and part is transmitted through the absorbing body. The energy that is converted to heat is said to have been 'lost'. (e.g. springs, dampers, etc.)
What is Sound AbsorptionWhen a sound wave hits the surface of a material: some of it reflects; some of them penetrate, and the rest are absorbed by the matter itself.
Learn more about sound absorption at https://brainly.com/question/16297116.
#SPJ4
