Here is a solution to your question:
A cornea is a transparent covering that makes up the front of the eyeball, forming a circle that appears black because light does not pass through it. Its primary function is to allow light to enter the eye while also covering a significant portion of the eye's focusing ability.
A normal cornea has a diopter of 43.0, according to lecture. The crystalline lens accounts for the remaining focusing power, and its diopter is 15.8 when not accommodated.
The eye's total focusing power is around 58.8 diopters, enabling it to focus light from great distances on the retina located 1.7 cm away.
If we consider the index of refraction of glass to be ng=1.50, we can design a lens for glasses that will enable us to see underwater as if we were in the air.
For the same, the following information is required:
Focal length, focusing power, and the radii of curvature of the lens are needed.
Since we're working with a thin lens, we can use the thin lens equation, which states that 1/f = (n_g - n_i) * (1/R1 - 1/R2), where f is the focal length, R1 is the radius of curvature of the first surface, R2 is the radius of curvature of the second surface, n_g is the index of refraction of the lens material, and n_i is the index of refraction of the medium in which the lens is located.
Assuming that the medium is water and the index of refraction of water is n_i = 1.33, we can use this equation to compute f, and since we're dealing with a thin lens, we can assume that the radii of curvature are both infinite (flat surfaces).
Using the equation 1/f = (n_g - n_i) * (1/R1 - 1/R2),
we get the following values for the focal length:
1/f = (1.50 - 1.33) * (1/∞ - 1/∞) => 1/f = 0.0177;
f ≈ 56.5 mm.
The focusing power of the lens is calculated using the formula P = 1/f, so P = 1/56.5 ≈ 0.0177.
The radii of curvature of the two surfaces can be assumed to be infinite since we are working with a thin lens. The lens can be shaped like a double-convex lens in this case.
The focal length is 56.5 mm, the focusing power is 0.0177, and the radii of curvature are infinite for both surfaces.
The lens can be made in the form of a double-convex lens.
To know more about covering visit :
https://brainly.com/question/31586190
#SPJ11
A system has a natural frequency of 50 Hz. Its initial displacement is .003 m and its initial velocity is 1.0 m/s. a. Express the motion as a cosine function x(t) = Acos(wnt +).. b. Express the motion as the sum of a cosine and sine function x(t) = A,cos(wnt) + A₂sin(wnt). 6. A system with harmonic motion has an amplitude of 0.05 m and a natural frequency of 10 Hz. a. What is the maximum acceleration of the system? b. What is the maximum velocity of the system? C. What is the period of the system?
A system has a natural frequency of 50 Hz.
Its initial displacement is .003 m and its initial velocity is 1.0 m/s.
The motion can be expressed as a cosine function.
[tex]x(t) = A cos (w n t + Ø)[/tex]
Where,
A = Amplitude,
[tex]Ø = Phase Angle,[/tex]
w = 2πf ,
f = Frequency and
t = time.
Initially,
x = 0.003 m and
v = 1 m/s.
Also,
f = 50 Hz
ω = 2πf = 2π × 50 = 100π rad/s
At t = 0,
[tex]x = A cos Ø = 0.003 m and[/tex]
[tex]v = – Aω sin Ø = 1 m/s[/tex]
the maximum velocity is 15.7 m/s and the period of the system is 0.1 seconds.
To know more about frequency visit:
https://brainly.com/question/29739263
#SPJ11
You cause a particle to move from point A, where the electric potential is 10.3 V, to point B, where the electric potential is −27.7 V. Calculate the change that occurs in the particle's electrostatic potential energy, when the particle is an electron, a proton, a neutral hydrogen atom, and a singly ionized helium atom (i.e., lacking one electron from its neutral state). electron: J proton: neutral hydrogen atom: J singly ionized helium atom:
The change in electrostatic potential energy is 2.78 x 10^-18 J for an electron and a singly ionized helium atom, while it is -2.78 x 10^-18 J for a proton. There is no change in potential energy for a neutral hydrogen atom.
For an electron with a charge of -1.6 x 10^-19 C:
ΔPE = (-1.6 x 10^-19 C) * (-27.7 V - 10.3 V) = 2.78 x 10^-18 J
For a proton with a charge of +1.6 x 10^-19 C:
ΔPE = (1.6 x 10^-19 C) * (-27.7 V - 10.3 V) = -2.78 x 10^-18 J
For a neutral hydrogen atom (which consists of a proton and an electron):
ΔPE = (-1.6 x 10^-19 C - 1.6 x 10^-19 C) * (-27.7 V - 10.3 V) = 0 J (no change)
For a singly ionized helium atom (lacking one electron):
ΔPE = (1.6 x 10^-19 C) * (-27.7 V - 10.3 V) = -2.78 x 10^-18
Therefore, the changes in electrostatic potential energy are:
- Electron: 2.78 x 10^-18 J
- Proton: -2.78 x 10^-18 J
- Neutral hydrogen atom: 0 J
- Singly ionized helium atom: -2.78 x 10^-18 J
To know more about electrostatic potential energy,
https://brainly.com/question/32892545
#SPJ11
what are the letters that follow the spectral sequence obafgkm
The letters that follow the spectral sequence OBABFGKM are LMSD.
The spectral sequence in astronomy is a categorization system for stars based on their surface temperature, beginning with the letters OBAFGKM. The letters are an acronym for the types of stars that have been discovered to date.Here is a breakdown of the letters and their meanings:
O-Type Stars: These are the hottest and most massive stars with a surface temperature of approximately 30,000 kelvin.The color of these stars is blue, and they are known to be bright and young.B-Type Stars: These stars are blue-white in color and have a surface temperature of approximately 10,000 kelvin.A-Type Stars: These stars are white in color and have a surface temperature of about 7,500 kelvin. They are known for being young.F-Type Stars: These are yellow-white stars with a surface temperature of around 6,000 kelvin. They are usually somewhat younger than our sun.G-Type Stars: These stars are known as yellow dwarfs, and our Sun is one of them. They have a surface temperature of around 5,500 kelvin and are middle-aged.K-Type Stars: These stars are orange in color and have a surface temperature of around 4,000 kelvin. They are known to be a bit cooler and older than our sun.M-Type Stars: These stars are red in color and have a surface temperature of around 3,500 kelvin. They are the coolest stars and are known to be small and dim.The sequence of letters is complete after M-type stars and before the next sequence begins with another letter. Hence, the letters that follow the spectral sequence OBAFGKM are LMSDI.
#SPJ11
learn more about "spectral sequence obafgkm"https://brainly.com/question/29358446
1. What is the electric potential in units of Volts at a distance of 42.9 mm from a point charge of magnitude q = 1.60 x 10-9 C?
2. If the potential due to a point charge is 6.02 kilo-Volts at a distance of 18.5 m, what is the magnitude of the charge in units of micro-Coulombs?
3. What is the strength of the electric field in units of V/m between two parallel conducting plates separated by 1.00 cm and having a potential difference (voltage) between them of 4.62 Volts?
4. What is the capacitance in units of micro-Farads of a parallel plate capacitor having plates of area 1.25 m2 that are separated by 0.0493 mm of a film with a dielectric constant = 5.8?
5. Find the charge in units of Coulombs stored by a 0.048 F capacitor when a potential of 6.63 Volts is applied.
The electric potential at 1. a distance of 42.9 mm is 37.3 V, 2.The magnitude of the charge in units 1.31 μC, 3. The strength of the electric field is 4.62 x 10⁴ V/m, 4. The capacitance of a parallel plate is 2.80 μF, 5.The charge stored by a 0.048 F capacitor is 0.316 C.
1. The electric potential at a distance of 42.9 mm from a point charge of magnitude q = 1.60 x 10⁻⁹ C is 37.3 V.
The electric potential (V) at a distance (r) from a point charge (q) can be calculated using the equation:
V = k * (q / r),
where k is the Coulomb's constant (k = 9 x 10⁹ Nm²/C²).
Substituting the given values:
V = (9 x 10⁹ Nm²/C²) * (1.60 x 10⁻⁹ C / 42.9 x 10⁻³ m),
V = 37.3 V.
Therefore, the electric potential at a distance of 42.9 mm from the point charge is 37.3 V.
2. The magnitude of the charge in units of micro-Coulombs for which the potential is 6.02 kilo-Volts at a distance of 18.5 m is 1.31 μC.
We can rearrange the formula for electric potential to solve for the charge:
q = V * r / k,
where V is the potential, r is the distance, and k is Coulomb's constant.
Substituting the given values:
q = (6.02 x 10³ V) * (18.5 m) / (9 x 10⁹ Nm²/C²),
q = 1.31 x 10⁻⁶ C = 1.31 μC.
Therefore, the magnitude of the charge in units of micro-Coulombs is 1.31 μC.
3. The strength of the electric field between two parallel conducting plates separated by 1.00 cm and having a potential difference of 4.62 V is 4.62 x 10⁴ V/m.
The electric field (E) between two parallel plates can be determined using the formula:
E = ΔV / d,
where ΔV is the potential difference (voltage) between the plates and d is the separation distance.
Substituting the given values:
E = (4.62 V) / (0.01 m),
E = 4.62 x 10⁴ V/m.
Therefore, the strength of the electric field between the plates is 4.62 x 10⁴ V/m.
4. The capacitance of a parallel plate capacitor with plates of area 1.25 m² and separated by 0.0493 mm of a dielectric with a relative permittivity (εᵣ) of 5.8 is 2.80 μF.
The capacitance (C) of a parallel plate capacitor can be calculated using the equation:
C = (ε₀ * εᵣ * A) / d,
where ε₀ is the vacuum permittivity (ε₀ = 8.85 x 10⁻¹² F/m), εᵣ is the relative permittivity, A is the area of the plates, and d is the separation distance.
Substituting the given values:
C = (8.85 x 10⁻¹² F/m * 5.8 * 1.25 m²) / (0.0493 x 10⁻³ m),
C = 2.80 x 10⁻⁶ F = 2.80 μF.
Therefore, the capacitance of the parallel plate capacitor is 2.80 μF.
5. The charge stored by a 0.048 F capacitor when a potential of 6.63 V is applied is 0.316 C.
The charge (Q) stored in a capacitor can be calculated using the equation:
Q = C * V,
where C is the capacitance and V is the potential (voltage) applied.
Substituting the given values:
Q = (0.048 F) * (6.63 V),
Q = 0.316 C.
Therefore, the charge stored by the capacitor is 0.316 C.
To know more about magnitude, refer here:
https://brainly.com/question/1413972#
#SPJ11
Consider a RC circuit with C=4.7μF, the total resistance R=2.9Ω, and the battery emf is ϵ=81V. Find the current when the charge is 24% of its maximum value. Express your answer using two decimal places.
The current when the charge is 24% of its maximum value is 24.76 A.
From the question above, Capacitance, C = 4.7μF
Resistance, R = 2.9Ω
Battery emf, ε = 81V
Percentage charge = 24%
The time constant of the circuit is given as:RC = 2.9 Ω × 4.7μF = 0.01363 s
The equation for charge on a capacitor is given by:
q = Cε(1 − e−t/RC)
We need to find the current when the charge is 24% of its maximum value. The charge at any time t can be found from the above equation.
At maximum charge, the capacitor will be fully charged. Hence the maximum charge, q max is given by:
q max = Cε = 4.7 μF × 81 V = 381.7 μC
When the charge is 24% of its maximum value:q = 0.24 × q max = 0.24 × 381.7 μC = 91.6 μC
The value of RC is given as 0.01363 s. Let the current when the charge is 24% of its maximum value be I.
At the time the charge on the capacitor is 24% of its maximum value, the current is given by the derivative of the above equation:
I = dq/dt = (ε/R) e^(-t/RC)
On substituting the values, we get:I = 24.76 A
Therefore, the current when the charge is 24% of its maximum value is 24.76 A.
Learn more about capacitor at
https://brainly.com/question/29519377
#SPJ11
A wave on a string is described by the wave function y = 0.100 sin(0.45x – 28t), where x and y are in meters and t is in seconds. (a) Show that an element of the string at x = 1.05 m executes harmonic motion by expressing y for the element in the form A cos(ot + ). (Enter A in m, w in rad/s, and p in rad.) A = m w = rad/s φ rad (b) Determine the frequency of oscillation of this particular element (in Hz). Hz
The frequency of oscillation of this particular element is approximately 4.46 Hz. To express the wave function y = 0.100 sin(0.45x – 28t) in the form A cos(ωt + φ), we need to use the identity sin(θ) = cos(θ – π/2).
Comparing the given wave function with the desired form, we can see that the amplitude A is equal to 0.100.
Next, we need to determine the angular frequency ω. The argument of the sine function, 0.45x – 28t, corresponds to ωt. Therefore, ω = 28 rad/s.
Lastly, we need to find the phase angle φ. Since the argument of the sine function is -28t at x = 1.05 m, we substitute x = 1.05 m into the wave function:
y = 0.100 sin(0.45(1.05) – 28t) = 0.100 sin(0.4725 – 28t).
Comparing this to the desired form, we can see that the phase angle φ is equal to 0.4725 rad.
Therefore, the expression for the element of the string at x = 1.05 m executing harmonic motion is y = 0.100 cos(28t + 0.4725).
(b) The frequency of oscillation can be determined from the angular frequency ω using the formula:
f = ω / (2π).
Substituting the given value of ω = 28 rad/s into the formula, we have:
f = 28 / (2π) ≈ 4.46 Hz.
Therefore, the frequency of oscillation of this particular element is approximately 4.46 Hz.
To learn more about wave functions, click here:-
brainly.com/question/28446848
#SPJ11
An object is placed 40.0 cm to the left of a lens, producing a
real image that is
located 70.0 cm from the lens. Is this a converging or diverging
lens? How do you
know this? What is its focal length?
This is a **converging lens** with a positive focal length. We can determine this based on the characteristics of the real image formed by the lens. In this case, the real image is formed on the opposite side of the lens as the object, indicating that the lens is converging the light rays and bringing them together to form a real image.
Diverging lenses, on the other hand, would produce virtual images on the same side as the object.
To find the focal length of the lens, we can use the lens formula:
1/f = 1/v - 1/u
Where f is the focal length, v is the image distance, and u is the object distance. In this case, the object distance u is - 40.0 cm (since it is placed to the left of the lens) and the image distance v is + 70.0 cm (since the real image is formed on the opposite side of the lens). Plugging in these values into the lens formula, we can calculate the focal length f.
To know more about lens, click here:-
https://brainly.com/question/29834071
#SPJ11
A mass m is suspended from a piece of string of length L to form a pendulum. When displaced from equilibrium and released the mass bering forth with a time-period T. The angle θ that the pendulum makes to vertical at time t is given by: θ=θ_max cos( T/2πt ) where θ_max is the initial displacement of the pendulum. a) What two forces act on the mass to cause the pendulum to swing back and forth? b) State and explain the effect of increasing the mass on the time-period. c) State the effect of increasing the length of the string on the time-period. the precision of the value determined.
The two forces acting on the mass to cause the pendulum to swing back and forth are the gravitational force and the tension in the string.
Increasing the mass of the pendulum will increase the time-period of its oscillations.
Increasing the length of the string will also increase the time-period of the pendulum.
The gravitational force is the force that pulls the mass of the pendulum downward, acting towards the center of the Earth. This force provides the restoring force that brings the pendulum back to its equilibrium position. The tension in the string is the force exerted by the string, directed towards the pivot point of the pendulum. This force counteracts the gravitational force and maintains the pendulum's motion.
The time-period of a pendulum is the time taken for it to complete one full oscillation. Increasing the mass of the pendulum will increase the gravitational force acting on it. Since the restoring force is directly proportional to the mass, a higher mass will result in a larger restoring force and a longer time-period. Therefore, increasing the mass of the pendulum will slow down its oscillations, resulting in a longer time-period.
The time-period of a pendulum is also influenced by the length of the string. Increasing the length of the string will increase the distance traveled by the pendulum, resulting in a longer time for one complete oscillation. This is because the gravitational force acting on the mass has a larger lever arm, causing the pendulum to swing more slowly. Therefore, increasing the length of the string increases the time-period of the pendulum.
In both cases, the effect is intuitive. A larger mass requires more force to move, resulting in slower oscillations and a longer time-period. Similarly, a longer string increases the distance traveled, requiring more time for the pendulum to complete one oscillation.
Learn more about Pendulum
/brainly.com/question/29268528?
#SPJ11
What is acceleration equal to for a pendulum, assuming a small
angle?
A. a = -1/gθ
B. a = -g/θ
C. a = -θ/g
D. a = -gθ
The correct answer for the acceleration of a pendulum, assuming a small angle, is option A: a = -1/gθ.
When a pendulum swings back and forth, its motion can be approximated as simple harmonic motion (SHM) if the angle of displacement from the vertical position is small. In SHM, the acceleration of the object is directly proportional to its displacement but in the opposite direction.
In the case of a pendulum, the displacement is given by θ, which represents the angular displacement from the vertical position. The negative sign indicates that the acceleration is in the opposite direction of the displacement.
The acceleration due to gravity is represented by g, which acts as a constant in this equation.
Therefore, the correct equation for the acceleration of a pendulum in terms of the angle of displacement (θ) is:
a = -1/gθ
This equation shows that the acceleration is inversely proportional to the angle of displacement and is multiplied by the reciprocal of the gravitational constant.
So, option A is the correct answer
To know more about pendulum click on below link :
https://brainly.com/question/31958396#
#SPJ11
The position function x(t) of a particle moving along an x axis is x=4.0−8.0t_2
, with x in meters and t in seconds. (a) At What iime does the particle (momentarily) stop? (b) Where does the particie. (momentarily) stop? (e) at What nenative time does the particle pass through the origin?
The particle momentarily stops at t = 0 seconds and x = 4.0 meters, and passes through the origin at t = -√0.5 seconds.
we need to analyze the position function x(t) and determine the points where the particle momentarily stops and passes through the origin.
(a) the time when the particle momentarily stops, we need to find the point where the velocity of the particle is zero. Velocity is the derivative of the position function x(t) with respect to time t.
Taking the derivative of x(t) with respect to t:
v(t) = d(x(t))/dt = -16t
Setting the velocity equal to zero and solving for t:
-16t = 0
t = 0
The particle momentarily stops at t = 0 seconds.
(b) the position where the particle momentarily stops, we substitute the time t = 0 seconds into the position function x(t):
x(0) = 4.0 - 8.0(0)^2
x(0) = 4.0
The particle momentarily stops at x = 4.0 meters.
(c) find the relative time when the particle passes through the origin, we set the position function x(t) equal to zero and solve for t:
4.0 - 8.0[tex]t^2[/tex] = 0
Simplifying the equation:
-[tex]8.0t^2[/tex]= -4.0
[tex]t^2[/tex] = 0.5
t = ±√0.5
we are interested in the negative time when the particle passes through the origin, we have:
t = -√0.5
The particle passes through the origin at t = -√0.5 seconds.
To know more about particle momentarily refer here
https://brainly.com/question/30755571#
#SPJ11
1. Describe what damped and undamped oscillations are? 2. How do damping affect the amplitude and the frequency of waves?
Damped and undamped oscillations are two types of repetitive motions that occur in various systems, such as mechanical and electrical systems.
Damped oscillations are oscillations whose amplitude gradually decreases. Over time, damped oscillations become less frequent. Undamped oscillations, on the other hand, are oscillations whose amplitude does not diminish over time. Undamped oscillations have a consistent frequency over time.
Wave amplitude and frequency are impacted by damping when the wave's amplitude and frequency are gradually reduced. When a wave is dampened, its energy is reduced by being transformed into heat or other forms of energy. The wave loses energy more quickly and its amplitude and frequency fall more rapidly the more damping there is.
To know more about oscillation, refer:
https://brainly.com/question/12622728
#SPJ4
A certain electromagnetic wave source operating at 10 W output power emits EM waves at the frequency of 4.59×10
14
Hz. How many photons are emitted by this source over a period of 1 minute? A. 1.98×10
21
Photons B. 3.51×10
21
Photons C. 4.75×10
21
Photons D. 5.45×10
21
Photons E. 7.25×10
21
Photons
The frequency of the electromagnetic wave is given by;f = 4.59×10¹⁴ HzOutput power.
P = 10 W.Using Planck's equationE = hfwhere, E is the energy of each photon, f is the frequency of the wave and h is the Planck's constant which is 6.626×10⁻³⁴ Js. E=hf=(6.626×10⁻³⁴ Js)(4.59×10¹⁴ Hz) = 3.05×10⁻¹⁹ JThus, the number of photons N is given by;N = P/E...Equation [1]Using equation [1],N = (10 W)/(3.05×10⁻¹⁹ J)N = 3.28×10¹⁹ photons/min (multiply by 60s/min)N = 1.97×10²¹ photonsAnswer: A. 1.98×10²¹ Photons.
To Learn more about electromagnetic Click this!
brainly.com/question/20343793
#SPJ11
Question 5 of 5 < ^ - /1 III : View Policies Current Attempt in Progress If we intercept an electron having total energy 1543 MeV that came from Vega, which is 26 ly from us, how far in light-years was the trip in the rest frame of the electron? Number i Units
The trip distance in light-years, as measured in the rest frame of the electron, is 26 light-years.
According to special relativity, the concept of time dilation arises when an object moves at relativistic speeds. As an electron approaches the speed of light, its perception of time changes compared to an observer at rest.
In this scenario, the electron is intercepted with a total energy of 1543 MeV. However, the question does not provide any information about the velocity of the electron or its relativistic effects. Without knowing the velocity or other relativistic factors, we cannot determine the exact distance traveled in the rest frame of the electron.
Therefore, in the absence of specific relativistic information, we can assume that the trip distance remains the same as the given distance of 26 light-years. This is because, in the rest frame of the electron, it is at rest and experiences time normally, so the distance traveled is equivalent to the distance observed by the stationary observer.
Hence, the trip distance in light-years, as measured in the rest frame of the electron, is 26 light-years.
To know more about light-years click here:
https://brainly.com/question/14534942
#SPJ11
At the intersection of the corridors of a hospital, at the top, on the wall, was mounted
a convex mirror that helps people avoid bumping into each other. The mirror has a radius
of curvature of 0.550 m.
The virtual image is formed by the apparent intersection of reflected rays.
The information provided states that the convex mirror has a radius of curvature of 0.550 m. To further understand the solution, we can discuss a few concepts related to convex mirrors.
A convex mirror is a curved mirror where the reflective surface bulges outward.
The radius of curvature (R) is the distance between the center of curvature (C) and the mirror's surface. In this case, the radius of curvature is given as 0.550 m.
For a convex mirror, the focal length (f) is half the radius of curvature. Therefore, in this case, the focal length can be calculated as:
f = R/2 = 0.550 m / 2 = 0.275 m
The focal length is an important parameter for convex mirrors because it determines certain properties, such as the virtual image formed and the field of view.
Convex mirrors always produce virtual images that are smaller and upright compared to the object. The virtual image is formed by the apparent intersection of reflected rays.
The position and size of the virtual image can be determined using ray diagrams.
In terms of the purpose of the convex mirror at the intersection of corridors in a hospital, it allows people to have a wider field of view and observe approaching individuals from different angles. This helps in preventing collisions and ensuring safety.
Learn more about image from the given link
https://brainly.com/question/27841226
#SPJ11
1. A Uniform rod of mass 18kg and length 15cm, is suspended from a point C by two strings CA and CB respectively. A horizontal force P newton is applied at the end A of the rod, and it is sufficient to keep the rod in equilibrium horizontally. Find P and the tension in the strings. [Take g = 10 m/s2]
Please this is a question of mechanics (Moment of force) in mathematics. You have to sketch before providing the solution
2. A light string is tied to two points at the same level and a smooth ring of weight 2 newtons which can slide freely along the string is pulled by a force P inclined at an angle of 800 to the downward vertical. If the positions of the string are inclined at angles of 600 and 300 to the vertical, find the force P and the magnitude of the tension in the string, correct to two decimal places.
Please this is a question of mechanics (Lami's theory) in mathematics. You have to sketch before providing the solution
From the diagram above, taking moments about C and balancing horizontally, we have:
Taking moment about C:
[tex]T1 × 15 × sin 60°[/tex]
[tex]= P × 0.15 × sin 30°[/tex]
(1) Balancing horizontally:
[tex]T2 × cos 60°[/tex]
[tex]= P × cos 30°[/tex]
(2), we can obtain the value of T2:
[tex]T2 = P × cos 30°/cos 60°T[/tex] (1),
we can obtain the value of P as follows:
[tex]P = T1 × 15 × sin 60°/0.15 × sin 30°[/tex]
Substituting [tex]T2 = P × cos 30°/cos 60°[/tex] in equation (2),
we can obtain the value of T2 as:
[tex]T2 = P × cos 30°/cos 60°[/tex]
we can find:
P = 300 N (correct to 2 decimal places)
T1 = 173.21 N (correct to 2 decimal places)
T2 = 150 N (correct to 2 decimal places)
Answer: P = 300 N (correct to 2 decimal places)
T1 = 173.21 N (correct to 2 decimal places)
T2 = 150 N (correct to 2 decimal places)
2. Horizontal:
[tex]Tcosθ = Pcos80°[/tex] (1)
Vertical:
[tex]Tsinθ – 2 = Psin80[/tex]° (2)
Dividing equation (2) by (1), we get
[tex]tanθ = (sin80°)/(cos80° – 2/T)[/tex]
[tex]T = Pcos80°/cosθ[/tex] (3)
Substituting for T in equation (2), we can obtain the value of P as:
[tex]P = [2 + Psin80°]/sinθ[/tex]
substituting the values above, we can find:
P = 0.83 N (correct to 2 decimal places)
T = 1.54 N (correct to 2 decimal places)
Answer:
P = 0.83 N (correct to 2 decimal places)
T = 1.54 N (correct to 2 decimal places)
To know more about horizontally visit:
https://brainly.com/question/29019854
#SPJ11
In most of our daily experience of touch, we are using _____.
a. passive touch
b. active touch
c. two-point touch
d. two-hand touch.
In most of our daily experience of touch, we are using passive touch.
Hence, the correct option is A.
Passive touch refers to the sensory perception of touch without active exploration or movement. It involves the detection and interpretation of tactile sensations through the skin and other sensory receptors without actively engaging in physical contact or manipulation.
In our daily lives, passive touch is the most common form of touch that we encounter. Examples include feeling the texture of objects, sensing temperature, experiencing pressure, or perceiving vibrations. Passive touch allows us to gather information about our surroundings and interact with objects without actively initiating movement or exploration.
Active touch, on the other hand, involves actively exploring and manipulating objects through touch. It often involves coordinated movements, such as using our hands and fingers to explore the texture, shape, and properties of objects. Active touch is commonly employed in tasks that require fine motor skills, precise control, and detailed sensory feedback.
The terms "two-point touch" and "two-hand touch" are not widely used in the context of touch perception and are not relevant to the distinction between passive and active touch.
Therefore, In most of our daily experience of touch, we are using passive touch.
Hence, the correct option is A.
To know more about passive touch here
https://brainly.com/question/28258463
#SPJ4
please show work
8. A plastic disk of radius 15 cm is spinning at 130 rpm. What is the magnitude of the centripetal acceleration of the outer rim of the disk?
The magnitude of the centripetal acceleration of the outer rim of the disk is approximately 27,819[tex]cm^2/s^2[/tex] or approximately 278.19 [tex]m^2/s^2[/tex]. The centripetal acceleration of the outer rim of a spinning disk can be calculated using the formula a = [tex](v^2)[/tex] / r, where v is the linear velocity of the rim and r is the radius of the disk.
First, we need to convert the given angular velocity from rpm to radians per second. Since 1 revolution is equal to 2π radians, we can calculate the angular velocity as follows:
Angular velocity = (130 rpm) * (2π radians/1 min) * (1 min/60 s) = 13.65 radians/s.
Next, we need to find the linear velocity of the outer rim of the disk. The linear velocity is equal to the circumference of the disk multiplied by the angular velocity. The circumference of the disk can be calculated using the formula 2πr, where r is the radius of the disk:
Circumference = 2π * (15 cm) = 30π cm.
Linear velocity = (30π cm) * (13.65 radians/s) = 409.5π cm/s.
Finally, we can calculate the centripetal acceleration using the formula a = [tex](v^2)[/tex]/ r:
Centripetal acceleration =[tex](409.5π cm/s)^2[/tex] / (15 cm) = 8841.86π [tex]cm^2/s^2[/tex]
The magnitude of the centripetal acceleration of the outer rim of the disk is approximately 27,819 [tex]cm^2/s^2[/tex] or approximately 278.19 [tex]m^2/s^2[/tex].
Learn more about centripetal acceleration here:
brainly.com/question/8825608
#SPJ11
The difference in frequency between the first and the fifth harmonic of a standing wave on a taut string is f5 - f1 = 40 Hz. The speed of the standing wave is fixed and is equal to 10 m/s. Determine the difference in wavelength between these modes. 15 - 11 = 0.20 m O 15-21 = 5 m O 15-11 = -0.64 m 45- 21 = -0.80 m 25-21 -1.60 m
The difference in wavelength between the first and fifth harmonics of the standing wave on a taut string is -0.64 m.
In a standing wave on a taut string, the frequency of the wave is related to the wavelength and the wave speed.
The difference in frequency between the first (f1) and fifth (f5) harmonics is given as 40 Hz, and the wave speed is fixed at 10 m/s. We need to determine the difference in wavelength (Δλ) between these modes.
The relationship between frequency, wavelength, and wave speed is given by the equation λ = v/f, where λ is the wavelength, v is the wave speed, and f is the frequency.
For the first harmonic (n = 1), the wavelength is λ1 = v/f1, and for the fifth harmonic (n = 5), the wavelength is λ5 = v/f5.
To find the difference in wavelength, we subtract the two equations: Δλ = λ5 - λ1 = (v/f5) - (v/f1).
Substituting the given values, we have Δλ = 10 * (1/f5 - 1/f1) = 10 * (1/5 - 1/1) = 10 * (-0.8) = -0.64 m.
Therefore, the difference in wavelength between the first and fifth harmonics is -0.64 m. The negative sign indicates that the fifth harmonic has a shorter wavelength compared to the first harmonic.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ11
A person walks 60.0 m east and then 11.0 m west. Find both the distance he has traveled and his displacement
A.)40.0 m, 40.0m
B.)71.0 m, 49.0 m
C.)26.0 m, 4.0 m
D. 71.0m, -49.0 m
2.A car initially traveling at 50 km/h accelerates at a constant rate of 2.0 m/s 2. How much time is required for the car to reach a speed of 90 km/h?
A.) 30 s
B.) 5.6 s
C.)15 s
D.) 4.2 s
The correct answer is (B) 71.0 m for the distance traveled and 49.0 m for the displacement. The correct answer is (B) 5.6 s. It would take approximately 5.6 seconds for the car to reach a speed of 90 km/h with a constant acceleration of 2.0 m/s².
To determine the distance traveled and displacement of a person walking, we need to consider both the magnitudes and directions of the individual displacements.
The person walks 60.0 m east and then 11.0 m west. Since the westward direction is opposite to the eastward direction, we need to subtract the distance traveled west from the distance traveled east to find the net displacement.
Distance traveled = 60.0 m + 11.0 m = 71.0 m
Displacement = 60.0 m (east) - 11.0 m (west) = 49.0 m (east)
Therefore, the correct answer is (B) 71.0 m for the distance traveled and 49.0 m for the displacement.
Regarding the second question, we can use the equation of motion that relates acceleration (a), initial velocity (v₀), final velocity (v), and time (t):
v = v₀ + at
We know the initial velocity (v₀) is 50 km/h and the final velocity (v) is 90 km/h. To solve for time (t), we need to convert the velocities to meters per second (m/s):
v₀ = 50 km/h × (1000 m/km) / (3600 s/h) = 13.9 m/s
v = 90 km/h × (1000 m/km) / (3600 s/h) = 25.0 m/s
Now we can rearrange the equation to solve for time:
t = (v - v₀) / a
Plugging in the values, we get:
t = (25.0 m/s - 13.9 m/s) / 2.0 m/s² ≈ 5.6 s
Therefore, the correct answer is (B) 5.6 s. It would take approximately 5.6 seconds for the car to reach a speed of 90 km/h with a constant acceleration of 2.0 m/s².
Learn more about velocity here:
https://brainly.com/question/28395671
#SPJ11
A 35 g steel ball is held by a ceiling-mounted Part A electromagnet 4.0 m above the floor. A compressed-air cannon sits on the floor, 4.6 m to What was the launch speed of the plastic ball? one side of the point directly under the ball. When a button is pressed, the ball drops and, Express your answer with the appropriate units. simultaneously, the cannon fires a 25 g plastic ball. The two balls collide 1.0 m above the floor.
The launch speed of the plastic ball was approximately 5.28 m/s, calculated using conservation of mechanical energy.
To determine the launch speed of the plastic ball, we can use the principle of conservation of mechanical energy.
Initially, the steel ball has gravitational potential energy due to its height above the floor. This potential energy is converted into kinetic energy as the ball drops. At the same time, the compressed-air cannon applies an impulse on the plastic ball, giving it an initial velocity.
At the point of collision, both balls have the same height above the floor, so their potential energy is equal. The kinetic energy of the steel ball is converted into potential energy after the collision, while the plastic ball gains kinetic energy.
Using the conservation of mechanical energy, we can write the equation:
[tex]m_steel * g * h = m_plastic * v_plastic^2 / 2[/tex]
Where:
m_steel is the mass of the steel ball (35 g)
g is the acceleration due to gravity (9.8 m/s^2)
h is the height of the steel ball above the floor (4.0 m)
m_plastic is the mass of the plastic ball (25 g)
v_plastic is the launch speed of the plastic ball (what we want to find)
Simplifying the equation and solving for v_plastic, we get:
v_plastic = sqrt(2 * g * h * m_steel / m_plastic)
Plugging in the values, we have:
v_plastic = [tex]sqrt(2 * 9.8 m/s^2 * 4.0 m * 35 g / 25 g)[/tex]
= [tex]sqrt(27.84 m^2/s^2)[/tex]
≈ 5.28 m/s
Therefore, the launch speed of the plastic ball is approximately 5.28 m/s.
Learn more about Mechanical energy
brainly.com/question/29509191
#SPJ11
Two shuffleboard disks of equal mass, one orange and the other green, are involved in a perfectly elastic glancing collision. The green disk is initially at rest and is struck by the orange disk moving initially to the right at
varrowboldoi = 3.45 m/s as in Figure (a) shown below. After the collision, the orange disk moves in a direction that makes an angle of ? = 36.0
the speed of the orange puck after the collision is 3.45 m/s and the angle is 36.0°.
vi = 3.45 m/sθ
= 36.0 m
The velocity of the green puck before the collision, v1 = 0
The mass of both pucks is the same.
collision is perfectly elastic, which means that both kinetic energy and momentum are conserved in the collision process. This implies that the total initial momentum equals the total final momentum, and the total initial kinetic energy equals the total final kinetic energy.
Due to conservation of momentum in the collision process;
Initial momentum = Final momentum
m1v1 = m2v2i + m1v1f.....(1)
And due to conservation of kinetic energy in the collision process;
Initial kinetic energy = Final kinetic energy(1/2)
m1v1² = (1/2) m1v1f² + (1/2) m2v2f² ....(2)
Where m1 and m2 are the masses of the green and orange puck respectively, v1 and v2i are the initial velocities of the green and orange puck respectively, v1f and v2f are the final velocities of the green and orange puck respectively.
Substituting the given values into equations (1) and (2) and solving for v2f and v1f, we have;
From equation (1);
v2f = (m1 / m2) (v1 - v1f)
From equation (2);
v1f = (v1 - v2f) cosθ So;
v2f = (m1 / m2) (v1 - v1f)v1f
= (v1 - v2f) cosθ
Substituting the given values;
v2f = (1 / 1) (3.45 - 0)
= 3.45 m/sv1f
= (3.45 - 3.45 cos36.0)
= 2.201 m/s
To learn more on velocity :
https://brainly.com/question/29523095
#SPJ11
Quasars are thought to be the nuclei of active galaxies in the early stages of their formation. Suppose a quasar radiates energy at the rate of 1041 W. At what rate is the mass of this quasar being reduced to supply this energy? Express your answer in solar mass units per year (smu/y), where one solar mass unit (1 smu = 2.0 x 1030 kg) is the mass of our Sun.
The rate of mass reduction of the quasar is 3.63x10²¹ kg/year or 1.815x10¹¹ solar masses/year. Quasars are thought to be the nuclei of active galaxies in the early stages of their formation. one solar mass unit (1 smu = 2.0 x 1030 kg) is the mass of our Sun.
The rate at which mass of the quasar is being reduced to supply this energy can be found out by using Einstein's famous equation, E=mc² where E is energy, m is mass and c is the speed of light.
Rearranging the equation, we can write:m = E/c²where E = 1041 W.
To convert this into mass, we need to consider that the energy comes from the mass of the quasar.
Therefore,m = (E/c²)/s where s is the speed of mass to energy conversion.
For nuclear reactions, the value of s is typically 3x10¹¹ m/s.
Putting the value, we getm = (1041 W/ (3x10¹¹ m/s)² = 1.15x10¹² kg/s.
As we need to express the answer in solar mass units per year (smu/y), we can convert the rate from kg/s to smu/year.
1 year = 31,536,000 seconds (approx.)
The mass of 1 smu = 2.0x10³⁰ kg.
Therefore, the rate at which the mass of the quasar is being reduced to supply this energy can be calculated as:1.15x10¹² kg/s x 31,536,000 s/year = 3.63x10²¹ kg/year.
Therefore, the rate of mass reduction of the quasar is 3.63x10²¹ kg/year or 1.815x10¹¹ solar masses/year.
Learn more about energy here ;
https://brainly.com/question/1932868
#SPJ11
A marble is released from rest and rolls 25 cm down a ramp. Determine the initial velocity of the marble. 0 m/s 25 cm 0 cm −9.8m/s ^2
Cannot tell from the information provided.
The initial velocity of the marble is 0 m/s according to the marble rolling down from rest.
Since the marble starts from rest, it will not have any initial velocity. Thus, we will write it's initial velocity as 0. Based on the stated options, there are two options with zero. Hence, the answer will depend on the unit of velocity, which is being tested in the question.
The velocity has the unit metre/second. Thus, the option in stated unit is 0 m/s. Since multiplying any number with zero results in zero, the 0 m/s and 0 cm/s will be equal. Hence, the right option is 0 m/s.
Learn more about velocity -
https://brainly.com/question/29523095
#SPJ4
Calculate the force of Gravity between the following objects.
a.)The Earth has a mass of 6.0 x 10 ^24 kg and the moon has a mass of 1.34 x 10^22 kg. They are separated by a distance of 3.84 x 10 ^8 m.
b.)The Earth has a mass of 6.0 x 10^24 kg and the sun has a mass of 2.00 x 10^30 kg. The distance from the sun to the Earth is 1.49 x 10^11 meters.
The force of gravity between the Earth and the moon is approximately 1.982 x [tex]10^{20[/tex] Newtons. The force of gravity between the Earth and the sun is approximately 3.52 x [tex]10^{22[/tex] Newtons.
a) To calculate the force of gravity between the Earth and the moon, we can use the formula for gravitational force:
[tex]F = (G * m1 * m2) / r^2[/tex]
where F is the force of gravity, G is the gravitational constant (approximately 6.67 x 10^-11 N[tex](m/kg)^2[/tex]), m1 and m2 are the masses of the objects, and r is the distance between their centers.
Plugging in the values:
m1 = 6.0 x [tex]10^{24[/tex]kg (mass of the Earth)
m2 = 1.34 x [tex]10^{22[/tex] kg (mass of the moon)
r = 3.84 x [tex]10^8[/tex] m (distance between the Earth and the moon)
F = (6.67 x [tex]10^{-11[/tex]N[tex](m/kg)^2[/tex]) * (6.0 x [tex]10^{24[/tex] kg) * (1.34 x [tex]10^{22[/tex]kg) / [tex](3.84 * 10^8 m)^2[/tex]
Calculating this expression, we find that the force of gravity between the Earth and the moon is approximately 1.982 x [tex]10^{20[/tex] Newtons.
b) Similarly, to calculate the force of gravity between the Earth and the sun, we can use the same formula:
m1 = 6.0 x [tex]10^{24[/tex] kg (mass of the Earth)
m2 = 2.00 x [tex]10^{30[/tex] kg (mass of the sun)
r = 1.49 x [tex]10^{11[/tex] m (distance between the Earth and the sun)
F = (6.67 x [tex]10^{-11} N(m/kg)^2[/tex]) * (6.0 x [tex]10^{24[/tex] kg) * (2.00 x [tex]10^{30[/tex] kg) / [tex](1.49 * 10^{11} m)^2[/tex]
Calculating this expression, we find that the force of gravity between the Earth and the sun is approximately 3.52 x [tex]10^{22[/tex] Newtons.
Learn more about gravity
https://brainly.com/question/940770
#SPJ11
If EA=Q
enclosed
/ε
0
, determine the electric field (E) that has a charge Q enclosed in a spherical shell with radius r. Show all work!!
The electric field that has a charge Q enclosed in a spherical shell with radius r is given by:
E = Q / (4πε[tex]0r^2[/tex])
Answer: E = Q / (4πε[tex]0r^2[/tex]).
The electric field (E) that has a charge Q enclosed in a spherical shell with radius r can be determined using the following steps:Step 1 The equation for electric flux enclosed is given by:
Φenc = Qenc / ε0
Where,Φenc = electric flux enclosed by the Gaussian surface
Qenc = charge enclosed by the Gaussian surface
ε0 = permittivity of free space
Step 2 For a spherical shell, electric field is perpendicular to the surface. Hence, electric flux can be calculated as:
Φenc = E * 4π[tex]r^2[/tex]
Where,E = electric field
r = radius of the Gaussian sphere.
Substitute Φenc in the equation for electric flux enclosed:
E * 4π[tex]r^2[/tex] = Qenc / ε0
E = Qenc / (4π[tex]r^2[/tex] * ε0)
To know more about radius visit:
https://brainly.com/question/13449316
#SPJ11
. To determine the moment of friction in the trunnions, a flywheel with a mass of 500 kg is mounted on the shaft, the radius of inertia of the flywheel is p = 1.5m. The flywheel is given an angular velocity corresponding to n= 240 rpm. Left to himself, he stopped after 10 minutes. Determine the moment of friction, assuming it to be constant.
The moment of friction in the trunnions is - 0.0125 kN m (in the opposite direction to the initial motion of the flywheel).
The moment of friction in the trunnions is determined by the following steps:
From the question above,
The mass of the flywheel, m = 500kg
The radius of inertia of the flywheel, p = 1.5m
The angular velocity of the flywheel, n = 240 rpm
The time, t = 10 min = 600 s
Initial angular velocity, n1 = 240 rpm = 240/60 rev/s = 4 rev/s
The final angular velocity, n2 = 0
Angular acceleration, α = (n2 - n1)/t = (0 - 4)/600 = - 0.00667 rev/s²
Radius of the flywheel, r = p = 1.5m
The moment of inertia of the flywheel is calculated using the formula;I = (mr²)/2 = (500 x 1.5²)/2 = 1125 kg m²
Applying the principle of conservation of energy, the moment of friction, Mf is given by;
Mf = (Iα)/t = (1125 x (-0.00667))/600Mf = - 0.0125 kN m (in the opposite direction to the initial motion of the flywheel)
Learn more about acceleration at
https://brainly.com/question/15661545
#SPJ11
Problem 6: A single circular loop with a radius of R=50 cm is placed in a uniform external magnetic field with initial strength of 30 T so that the plane of the coil is perpendicular to the field. The strength of the B-field changes to-10 T in 0.2 sec. The loop includes resistor of resistance of 250 2. a) Find the average induced emf(AV) during this time interval of 0.3 sec. b) What's the induced current I and power P dissipated through the resistor R? c) What is the magnitude of the induced magnetic field (produced by this induced current) along this circular loop/wire? d) What would the average induced emf and the induced current be if there were 15 loops?
a) The average induced emf(AV) during this time interval of 0.3 sec is -200 V.
b) The induced current I and power P dissipated through the resistor R is-0.8 A and 0.64 W respectively.
c) The magnitude of the induced magnetic field along the circular loop/wire is 0.8 × [tex]10^-^7 T[/tex].
d) The average induced emf and the induced current be if there were 15 loops will be -3000V and - 12A respectively.
a) To find the average induced emf (AV), we use the equation AV = (change in magnetic flux)/(change in time). The change in magnetic field is -40 T (from -10 T to 30 T), and the change in time is 0.2 s. Plugging these values into the equation:
AV = (-40 T)/(0.2 s) = -200 V
The average induced emf during this time interval is -200 V.
b) The induced current (I) can be found using Ohm's law, which states that I = AV/R, where R is the resistance. The resistance is given as 250 Ω. Plugging in the value for AV from part a), we can calculate the induced current:
I = (-200 V)/(250 Ω) = -0.8 A
The induced current is -0.8 A.
To calculate the power dissipated (P), we use the equation P = [tex]I^2R[/tex]:
P = [tex](-0.8 A)^2[/tex] * 250 Ω = 0.64 * 250 W = 160 W
The power dissipated through the resistor is 160 W.
c) The magnitude of the induced magnetic field along the circular loop/wire can be determined using Ampere's law. Since the loop is a closed loop, the magnetic field produced by the induced current will create a magnetic field along the loop. The magnitude of the induced magnetic field can be found using the equation B = μ0I/(2πr), where μ0 is the permeability of free space, I is the current, and r is the radius of the loop. Plugging in the values:
B = (4π × [tex]10^-^7[/tex] T·m/A) * (-0.8 A) / (2π * 0.5 m)
B = -0.8 × [tex]10^-^7[/tex]T
The magnitude of the induced magnetic field along the circular loop/wire is 0.8 × [tex]10^-^7[/tex]T.
d) If there were 15 loops instead of one, the average induced emf and the induced current would be multiplied by a factor of 15:
Average induced emf = -200 V * 15 = -3000 V
Induced current = -0.8 A * 15 = -12 A
So, if there were 15 loops, the average induced emf would be -3000 V and the induced current would be -12 A.
Learn more about average induce emf here:
brainly.com/question/31745336
#SPJ11
At t=0 a batter hits a baseball with an initial speed of 30 m/s at a 55
∘
angle to the horizontal. An outfielder is 85 m from the batter at t=0 and, as seen from home plate, the line of sight to the outfielder makes a horizontal angle of 22
∘
with the plane in which the ball moves (as shown in the figure). What direction must the fielder take to catch the ball at the same height from which it was struck? Give the angle with respect to the outfielder's line of sight to home plate. Express your answer to two significant figures and include the appropriate units. Express your answer to two significant figures and include the appropriate units.
Therefore, the fielder should run towards the ball at an angle of 1° (rounded to 2 significant figures) with respect to the outfielder's line of sight to home plate to catch the ball at the same height from which it was struck.
At t=0 a batter hits a baseball with an initial speed of 30 m/s at an angle of 55° to the horizontal.
An outfielder is 85 m from the batter at t=0 and, as seen from home plate, the line of sight to the outfielder makes a horizontal angle of 22° with the plane in which the ball moves (as shown in the figure).
The direction the fielder must take to catch the ball at the same height from which it was struck is given as follows:
From the diagram provided, it is clear that the ball lands at the same height from which it was hit. Thus, the fielder must run to a point directly beneath the point where the ball will land.
{drawing:0}First, we will calculate the time it takes for the ball to hit the ground. The ball’s trajectory can be separated into horizontal and vertical components. We can use the vertical component of velocity to calculate the time to reach the highest point, and then use the time to reach the highest point to calculate the total time in the air. The vertical component of velocity at launch is
[tex]30sin(55°) = 24.3 m/s24.3 m/s[/tex]
is the initial vertical velocity component, which will eventually become zero at the highest point.
The vertical velocity at the highest point is zero, and the acceleration due to gravity is -9.81 m/s^2, downward.
To know more about initial speed visit:
https://brainly.com/question/28060745
#SPJ11
counter. (a) With whak velocity did the mug leave the counter? m/s (b) Whak was the direction of the mug's velocity fust before it hit the fioce? - (beiow the horizontal)
If the calculated vertical displacement (h) is less than or equal to the height of the fence (7.74 m), then the ball clears the fence. Otherwise, it does not clear the fence.
(a) To determine if the ball clears the 7.74 m high fence located 101 m horizontally from the launch point, we need to analyze the vertical motion of the ball.
First, we can find the time of flight (t) using the horizontal range and the initial horizontal velocity. Since the horizontal range is 111 m, we can use the equation:
Range = Horizontal Velocity × Time of Flight
111 m = (Initial Horizontal Velocity) × t
Next, we can find the vertical displacement (h) of the ball using the time of flight and the launch angle. The equation for vertical displacement is:
h = (Initial Vertical Velocity) × t + (1/2) × g × t^2
Since the ball is initially 1.15 m above the ground, the vertical displacement (h) should be h = 7.74 m - 1.15 m = 6.59 m.
If the calculated vertical displacement (h) is less than or equal to the height of the fence (7.74 m), then the ball clears the fence. Otherwise, it does not clear the fence.
(b) To find the distance between the fence top and the ball center at the fence location, we need to determine the vertical position of the ball when it reaches the fence.
Using the time of flight (t) calculated in part (a), we can find the vertical displacement (y) at that time using the equation:
y = (Initial Vertical Velocity) × t + (1/2) × g × t^2
The distance between the fence top and the ball center is the difference between the fence height and the vertical displacement at that time.
However, without specific values for the initial horizontal and vertical velocities, it is not possible to provide numerical answers. To obtain precise values, the initial velocities or additional information would be needed.
Learn more about velocity here:
https://brainly.com/question/28395671
#SPJ11
A 2.00 g air-inflated balloon is given an excess negative charge, q1=−4.00×10−8C, by rubbing it with a blanket. It is found that a charged rod can be held above the balloon at a distance of d=6.00 cm to make the balloon float. Assume the balloon and rod to be point charges. The Coulomb force constant is 1/(4πϵ0)=8.99×109 N⋅m2/C2 and the acceleration due to gravity is g=9.81 m/s2. In order for this to occur, what polarity of charge must the rod possess? q2 is neutral q2 is a proton q2 is positive q2 is negative How much charge q2 does the rod have?
The correct answer is that the polarity of charge q2 on the rod must be negative and the magnitude of the charge q2 on the rod is 2.24 × 10⁻⁸ C. Mass of the balloon, m = 2 g Charge given to balloon, q1 = -4 × 10⁻⁸ C distance from balloon, d = 6 cm = 0.06 m Coulomb force constant, k = 1/(4πε0) = 8.99 × 10⁹ Nm²/C² Acceleration due to gravity, g = 9.81 m/s².
We need to find the polarity of charge q2 on the rod and how much charge q2 does the rod have.
In order for this to occur, the electric force on the balloon must be equal in magnitude to the weight of the balloon.
Force on balloon due to electric field,F = k * (q1 * q2) / d² where, q2 is the charge on the rod.
The weight of the balloon,W = mg = 2 × 9.81 = 19.62 mN.
For the balloon to float,
F = W => k * (q1 * q2) / d² = 19.62 × 10⁻³=> q2 = (19.62 × 10⁻³ * d²) / (k * q1)=> q2 = (19.62 × 10⁻³ * 0.06²) / (8.99 × 10⁹ * 4 × 10⁻⁸)=> q2 = 2.24 × 10⁻⁸ C.
The polarity of charge q2 on the rod must be negative and the magnitude of the charge q2 on the rod is 2.24 × 10⁻⁸ C.
Learn more about electric force here ;
https://brainly.com/question/20935307
#SPJ11
