Option D: The correct name for an aqueous solution of H₂SO₄ is sulfuric acid.
One of the most important chemicals in terms of commerce is sulfuric acid, often known as oil of vitriol or hydrogen sulfate (H₂SO₄). It is a dense, colorless, oily liquid that is very caustic. Industrially, sulfuric acid is created when water reacts with sulfur trioxide (see sulfur oxide), which is created chemically by combining oxygen and sulfur dioxide, either through the contact process or the chamber process.
Being a very strong acid, sulfuric acid totally ionizes in aqueous solutions to produce hydrogen sulfate ions (HSO₄) and hydronium ions (H₃O⁺). Hydrogen sulfate ions also dissolve in diluted solutions, producing more hydronium ions and sulfate ions (SO₄²⁻).
To know more about sulfuric acid, refer:
https://brainly.com/question/10220770
#SPJ4
Correct question:
The correct name for an aqueous solution of H2SO4 is Group of answer choices
sulfurous acid
hydrosulfuric acid
none of these
sulfuric acid
hydrosulfurous acid
A radioctive element's nucleus has a charge of 92e. It can spontaneously decay into a nucleus with charge 2e and a nucleus with a chrage 90 e. Just after the decay, the two nucleii are 3.5×10
−15
m apart. a) What is the magnitude of the electrostatic force between them? N b) What is the magnitude of the acceleration of the bigger particle, whose mass is 6.4×10
−27
kg ? ×10
30
m/s
2
a) The magnitude of the electrostatic force between the two nuclei is (8.99 × 10^9 N·m^2/C^2) × [(92e) × (2e)] / (3.5 × 10^(-15) m)^2 N.
b) The magnitude of the acceleration of the bigger particle is [(8.99 × 10^9 N·m^2/C^2) × (92e)^2] / (6.4 × 10^(-27) kg) m/s^2.
a) To calculate the magnitude of the electrostatic force between the two nuclei, we can use Coulomb's law. Coulomb's law states that the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. The equation for Coulomb's law is F = (k * |q1 * q2|) / r^2, where F is the magnitude of the electrostatic force, k is the electrostatic constant (8.99 × 10^9 N·m^2/C^2), q1 and q2 are the charges of the two nuclei, and r is the distance between them.
In this case, the charge of the first nucleus is 92e, and the charge of the second nucleus is 2e. The distance between them is given as 3.5 × 10^(-15) m. Plugging in these values into the formula, we can calculate the magnitude of the electrostatic force between the two nuclei.
b) The acceleration of the bigger particle can be calculated using Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration. The equation is F = m * a, where F is the magnitude of the force, m is the mass of the object, and a is the acceleration.
In this case, the force between the two nuclei is the electrostatic force calculated in step (a). The mass of the bigger particle is given as 6.4 × 10^(-27) kg. By rearranging the formula and substituting the known values, we can determine the magnitude of the acceleration of the bigger particle.
By following these calculations, we can find the answers to both parts of the question accurately.
Learn more about electrostatic
brainly.com/question/16489391
#SPJ11
which hormone is classified as an amino acid derivative?
The hormone classified as an amino acid derivative is epinephrine.
Epinephrine, also known as adrenaline, is a hormone that belongs to the category of amino acid derivatives. Amino acid derivatives are a class of hormones derived from the amino acid tyrosine. These hormones are synthesized in the body from the amino acid through a series of enzymatic reactions.
To understand the process of epinephrine synthesis, let's start with the precursor molecule, tyrosine. Tyrosine is an amino acid that is obtained from dietary protein sources. Within the body, tyrosine is converted into a compound called L-DOPA (L-dihydroxyphenylalanine) through the action of an enzyme called tyrosine hydroxylase.
The next step in the synthesis of epinephrine involves the conversion of L-DOPA into dopamine, which is catalyzed by an enzyme called aromatic L-amino acid decarboxylase. Dopamine then undergoes further enzymatic reactions to be transformed into norepinephrine, a neurotransmitter and hormone involved in the body's stress response.
Finally, norepinephrine is converted into epinephrine through the addition of a methyl group by the enzyme phenylethanolamine N-methyltransferase (PNMT). This last step occurs primarily in the adrenal medulla, which is the inner part of the adrenal glands located on top of the kidneys. Epinephrine is released into the bloodstream in response to stress or excitement and plays a vital role in the "fight or flight" response, increasing heart rate, blood pressure, and energy availability to prepare the body for action.
In summary, epinephrine is classified as an amino acid derivative hormone because it is synthesized from the amino acid tyrosine through a series of enzymatic reactions. It is an essential hormone involved in the body's stress response and is responsible for many physiological changes that occur during times of heightened arousal.
Learn more about epinephrine
https://brainly.com/question/22817529
#SPJ11
A sample consisting of 2.50 moles of an ideal gas is converted between states 1 and 2 as given below (where only PV work is involved).
State 1 0.900 bar, 83.0 L, 359 K
State 2 0.600 bar, 83.0 L, 279 K
What is ∆U (in kJ) for the gas for this change?
The change in internal energy (∆U) for the gas during the given conversion is -4.26 kJ.
To calculate the change in internal energy (∆U), we can use the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system. In this case, only PV work is involved, so we can ignore any heat transfer.
The work done by the gas can be calculated using the formula: work = -P∆V, where P is the pressure and ∆V is the change in volume.
At state 1, the pressure is 0.900 bar and the volume is 83.0 L.
At state 2, the pressure is 0.600 bar and the volume is 83.0 L.
Since the volume remains constant (∆V = 0), the work done by the gas is zero.
Therefore, ∆U = Q - W = Q - 0 = Q, where Q represents the heat added to the system.
To calculate Q, we can use the equation: ∆U = nCv∆T, where n is the number of moles, Cv is the molar specific heat at constant volume, and ∆T is the change in temperature.
Given that the number of moles is 2.50 and the change in temperature is 279 K - 359 K = -80 K, we need to find the molar specific heat at constant volume for the gas.
The molar specific heat at constant volume can vary depending on the gas. Once we know the gas, we can look up its molar specific heat value. Assuming it is a diatomic ideal gas, the value for Cv is approximately 20.8 J/(mol·K).
Using the equation ∆U = nCv∆T, we can calculate the change in internal energy:
∆U = 2.50 mol × (20.8 J/(mol·K)) × (-80 K) = -4.26 kJ
Therefore, the change in internal energy (∆U) for the gas during the given conversion is approximately -4.26 kJ.
Learn more about internal energy
brainly.com/question/11742607
#SPJ11
Ratio of the actual amount of water vapor present to the amount that could be present if the air at that temperature were saturated.
A. All of the choices given are correct
B. Relative Humidity
C. Absolute Humidity
D. Vapor Pressure
B. Relative humidity is the ratio of the actual amount of water vapor present to the amount that could be present if the air were saturated at that temperature. It represents the percentage of moisture in the air relative to its maximum capacity at that temperature.
The relative humidity is the ratio of the actual amount of water vapor present in the air to the amount that could be present if the air were saturated at that temperature. It is expressed as a percentage and indicates how close the air is to being saturated with water vapor. Relative humidity of 100% means the air is saturated, while lower relative humidity values indicate that the air is holding less moisture compared to its saturation capacity at that temperature. Absolute humidity refers to the actual amount of water vapor present in the air, usually measured in grams of water vapor per cubic meter of air. Vapor pressure is the partial pressure exerted by water vapor in a mixture of gases, which is related to but not the same as relative humidity. Therefore, the correct answer is B. Relative Humidity.
learn more about Relative humidity here:
https://brainly.com/question/31785862
#SPJ11
The entropy of saturated water is greater than that of subcooled water at 0^{\circ} {C} True False
The entropy of saturated water is greater than that of subcooled water at 0°C. (True)
Yes, the statement is true. The entropy of saturated water is indeed greater than that of subcooled water at 0°C. Entropy is a measure of the degree of disorder or randomness in a system. In the case of water, as it undergoes phase transitions, its entropy changes.
When water is in a subcooled state at 0°C, it exists as a liquid with a relatively low level of thermal energy. The water molecules are arranged in a more ordered manner, with limited freedom of movement. This results in a lower entropy value compared to saturated water.
On the other hand, saturated water at 0°C is in equilibrium with its vapor phase. It contains both liquid and vapor phases in equilibrium, and the molecules have more freedom to move and occupy various positions. This increased molecular disorder leads to a higher entropy value compared to subcooled water.
In summary, saturated water at 0°C has a higher entropy because it represents a more disordered state with the coexistence of liquid and vapor phases, whereas subcooled water is in a more ordered state with limited molecular movement.
Learn more about Entropy
brainly.com/question/20166134
#SPJ11
how many calories are there in one gram of alcohol
a. 4 kcal
b. 4.3 kcal
c. 9.3 kcal
d. 7.1 kcal
how much caffeine is in a 12 ounce can of mountain dew?
Answer:
How much caffeine is in a 12 ounce can of mountain dew?
55.0 (mg)
explain what occurs in a substitution reaction and give an example of substitution reaction
In a substitution reaction, the reactant molecule undergoes a structural change by replacing an existing atom or functional group with a new atom or functional group.
In organic chemistry, a substitution reaction is a type of chemical reaction where an atom or a functional group is replaced by another atom or functional group. It involves the substitution of one or more atoms or groups in a molecule with a different atom or group.
In a substitution reaction, the reactant molecule undergoes a structural change by replacing an existing atom or functional group with a new atom or functional group. This process typically occurs when a nucleophile attacks the substrate molecule, leading to the displacement of a leaving group. The nucleophile donates a pair of electrons to form a new bond, while the leaving group is expelled from the molecule.
An example of a substitution reaction is the reaction between an alkyl halide and a nucleophile. In this case, the halogen atom (leaving group) is substituted by the nucleophile, resulting in the formation of a new compound. One common example is the reaction between methyl bromide (CH₃Br) and hydroxide ion (OH⁻) as the nucleophile:
CH₃Br + OH⁻ → CH₃OH + Br⁻
In this reaction, the hydroxide ion (OH⁻) acts as the nucleophile and replaces the bromine atom in methyl bromide (CH₃Br). The bromine atom is expelled as a bromide ion (Br⁻), and a new compound, methanol (CH₃OH), is formed.
To know more about substitution reaction here
https://brainly.com/question/30339615
#SPJ4
The drawback of a just-in-time inventory system is that it
Question 1 options:
a.increases the total capital required by a firm.
b.leaves a firm without a buffer stock of inventory.
c.increases inventory holding costs, such as warehousing and storage costs.
d.is less efficient than traditional system in spotting and fixing defective inputs.
e.lowers a company's profitability as measured by return on capital invested.
The drawback of a just-in-time inventory system is that it b. leaves a firm without a buffer stock of inventory.
When a company utilizes a just-in-time (JIT) inventory system, it is known for having several advantages. This system is used in manufacturing and supply chain management to minimize costs and increase efficiency. It is a lean manufacturing technique that aids in reducing waste and maximizing efficiency.
Just-in-time (JIT) inventory systems, on the other hand, do have a disadvantage. They leave a business without a buffer stock of inventory. This means that a company that utilizes a JIT inventory system has little or no inventory stock.
JIT inventory management relies on having the necessary parts and materials at the right place at the right moment. As a result, any disruption in the supply chain or production process can have catastrophic consequences. A disruption can quickly turn into a supply chain crisis without any additional inventory on hand. This means that the firm will be forced to interrupt or shut down production.
In conclusion, a just-in-time inventory system's drawback is that it leaves a firm without a buffer stock of inventory.
Learn more about the just-in-time inventory system from the given link-
https://brainly.com/question/30791354
#SPJ11
when you smell an odor which aspect of the substance
When we smell an odor, it is the volatile organic compounds that are evaporated from a substance and get into the air that we are inhaling. When we inhale, the scent molecules in the air interact with the sensory neurons in our nose, which sends signals to the brain and tells us what we are smelling.
Our sense of smell is very powerful, and it can trigger memories and emotions that we might not even realize are associated with a particular scent. The strength and type of scent depend on various factors, such as the concentration of volatile organic compounds in the air, the properties of the substance, and the environment in which it is present.
When we smell something, we are experiencing the chemical properties of the substance through our nose. The scent of something can give us information about the substance, such as its origin, composition, and potential risks. The olfactory system in our body is responsible for processing the information that we get from scents, and it is closely related to the limbic system of the brain, which is responsible for emotions, memory, and motivation. When we smell something, we might react to it in different ways depending on our personal experience, cultural background, and mood.
smelling an odor is a complex process that involves the interaction between the substance and our sensory neurons in the nose. The scent molecules that we inhale can trigger memories, emotions, and reactions that are unique to each individual. Understanding the science behind smells can help us appreciate the importance of our sense of smell and how it affects our daily lives.
For more question volatile organic
https://brainly.com/question/25403770
#SPJ8
which element of the prt session gradually and safely tapers
The cool-down phase of a PRT session is the element that gradually and safely tapers. It allows the body to transition from intense activity to a resting state while promoting muscle relaxation, flexibility, and the removal of waste products.
The element of the Physical Readiness Training (PRT) session that gradually and safely tapers is the cool-down phase. The cool-down phase is an essential part of any exercise routine as it allows the body to transition from intense activity back to a resting state. During this phase, the intensity of the exercises decreases gradually, helping to prevent any sudden drops in heart rate or blood pressure, which can lead to dizziness or fainting.
The cool-down phase typically involves performing exercises that promote stretching and flexibility, such as static stretches or yoga-inspired movements. These exercises help to relax the muscles and prevent the buildup of lactic acid, which can cause muscle soreness. By gradually reducing the intensity of the workout, the cool-down phase also helps to prevent the pooling of blood in the extremities and aids in the removal of waste products from the muscles.
In summary, the cool-down phase of a PRT session is the element that gradually and safely tapers. It allows the body to transition from intense activity to a resting state while promoting muscle relaxation, flexibility, and the removal of waste products.
Learn more about transition from the link
https://brainly.com/question/985345
#SPJ11
A 12.0-g sample of carbon from living - Part A matter decays at the rate of 161.5 decays/minute due to the radioactive What will be the decay rate of this sample in 1000 years ? Express your answer in decays per minute. - Part B What will be the decay rate of this sample in 50000 years ? Express your answer in decays per minute.
The sample will degrade at a rate of 151.74 decays per minute in 1000 years and 10.24 decays per minute in 50000 years, respectively.
To calculate the decay rate of the carbon sample in Part A and Part B, we need to consider the half-life of carbon-14. The half-life of carbon-14 is approximately 5730 years.
Part A:
To find the decay rate of the sample in 1000 years, we need to determine the number of half-lives that have passed in 1000 years. We can do this by dividing the time elapsed (1000 years) by the half-life of carbon-14 (5730 years):
Number of half-lives = 1000 years / 5730 years ≈ 0.1748
Since each half-life halves the initial quantity, we can calculate the remaining fraction of the sample after 0.1748 half-lives:
Remaining fraction = (1/2)^(0.1748) ≈ 0.9391
The decay rate is given as 161.5 decays/minute, so we can calculate the decay rate of the sample in 1000 years:
Decay rate in 1000 years = Remaining fraction * Initial decay rate
= 0.9391 * 161.5 decays/minute
≈ 151.74 decays/minute
Therefore, the decay rate of the sample in 1000 years is approximately 151.74 decays/minute.
Part B:
To find the decay rate of the sample in 50000 years, we need to determine the number of half-lives that have passed in 50000 years:
Number of half-lives = 50000 years / 5730 years ≈ 8.7257
Using the same logic as in Part A, the remaining fraction after 8.7257 half-lives is:
Remaining fraction = (1/2)^(8.7257) ≈ 0.0632
Now we can calculate the decay rate in 50000 years:
Decay rate in 50000 years = Remaining fraction * Initial decay rate
= 0.0632 * 161.5 decays/minute
≈ 10.24 decays/minute
Therefore, the decay rate of the sample in 50000 years is approximately 10.24 decays/minute.
To know more about decay rate click on below link :
https://brainly.com/question/30068164#
#SPJ11
water is electrically polar due to hydrogen's high electronegativity.
The statement "Water is electrically polar due to hydrogen's high electronegativity" is true because water is a polar molecule because the oxygen atom in water has a higher electronegativity than the hydrogen atoms.
Electronegativity is a measure of an atom's ability to attract electrons towards itself in a chemical bond. Oxygen is more electronegative than hydrogen, so it attracts the shared electrons more strongly.
As a result, the oxygen atom in water gains a partial negative charge (δ-) while the hydrogen atoms acquire partial positive charges (δ+). This separation of charges creates an electrical polarity within the water molecule.
The polar nature of water gives rise to several important properties, such as its ability to form hydrogen bonds, its high specific heat capacity, and its solvent properties.
These properties are crucial for life as they facilitate many biological processes, including the transport of nutrients and waste, temperature regulation, and chemical reactions within living organisms.
In conclusion, water is indeed electrically polar due to hydrogen's high electronegativity. This polarity plays a significant role in water's unique properties and its importance in biological systems.
To know more about electronegativity refer here:
https://brainly.com/question/14031645#
#SPJ11
Complete Question:
Water is electrically polar due to hydrogen's high electronegativity. True or False.
Water is a polar molecule due to the difference in electronegativity between hydrogen and oxygen. This results in partial positive charges on the hydrogen atoms and a partial negative charge on the oxygen atom, making the molecule electrically polar. The polar nature of water allows for the formation of hydrogen bonds and enables water to interact with other polar molecules.
Explanation:Water is a polar molecule, with the hydrogen atoms acquiring a partial positive charge and the oxygen a partial negative charge. This occurs because the oxygen atom's nucleus is more attractive to the hydrogen atoms' electrons than the hydrogen nucleus is to the oxygen's electrons. Thus, oxygen has a higher electronegativity than hydrogen and the shared electrons spend more time near the oxygen nucleus than the hydrogen atoms' nucleus, giving the oxygen and hydrogen atoms slightly negative and positive charges, respectively.
Another way of stating this is that the probability of finding a shared electron near an oxygen nucleus is more likely than finding it near a hydrogen nucleus. Either way, the atom's relative electronegativity contributes to developing partial charges whenever one element is significantly more electronegative than the other, and the charges that these polar bonds generate may then be used to form hydrogen bonds based on the attraction of opposite partial charges. (Hydrogen bonds, which we discuss in detail below, are weak bonds between slightly positively charged hydrogen atoms to slightly negatively charged atoms in other molecules.) Since macromolecules often have atoms within them that differ in electronegativity, polar bonds are often present in organic molecules.
Learn more about polarity of water here:https://brainly.com/question/38709386
#SPJ11
According to the
graph, what happens
to the concentration
of D over time
compared to E?
Concentration (M)
Reaction: DE
Time (sec)
A. The concentration of D increases faster then E
decreases.
B. The comparable rates cannot be determined from the
graph.
C. The concentration of D decreases faster than E
increases.
D. The concentration of D increases at the same rate E
decreases.
Answer: Based on the given graph, the concentration of D over time decreases faster than E increases. Therefore, the correct option is C.
Explanation:
The concentration of D decreases faster than E increases. The graph represents the reaction between D and E, which is shown as DE. As time goes on, the concentration of D decreases while the concentration of E increases. This indicates that D is being consumed in the reaction while E is being produced. However, it can be seen from the graph that the decrease in the concentration of D is steeper than the increase in the concentration of E.
Therefore, option C is correct.
What are atoms of the same element with different mass number?
Atoms of the same element with different mass numbers are known as isotopes.
Isotopes are variants of an element that have the same number of protons (thus maintaining their elemental identity) but differ in the number of neutrons in their atomic nuclei. This variation in neutron number results in different mass numbers for the isotopes.
For example, let's consider the element carbon. Carbon has an atomic number of 6, which means it has six protons in its nucleus. However, carbon can have different isotopes with varying numbers of neutrons. The most common isotope of carbon is carbon-12, which has 6 protons and 6 neutrons, resulting in a mass number of 12. Another carbon isotope, carbon-13, has 6 protons and 7 neutrons, giving it a mass number of 13. There is also a less common carbon isotope, carbon-14, which has 6 protons and 8 neutrons, leading to a mass number of 14.
Isotopes of an element possess similar chemical properties since they have the same number of electrons and therefore the same electronic structure. However, isotopes may have slightly different physical properties due to variations in their mass. Isotopes also play a crucial role in fields such as radiometric dating, isotopic labeling, and nuclear medicine.
To know more about isotope click on below link :
https://brainly.com/question/30899767#
#SPJ11
2. a. Make a conversion formula from Fahrenheit scale to Celsius scale and vice versa, and another temperature scale named after your surname which has a boiling point of water at 360 degrees and freezing point at 100 degrees. b. At what temperature value/reading on both Fahrenheit and Celsius scale will be the same?
The temperature value/reading on both Fahrenheit and Celsius scale will be approximately 32.52 degrees Celsius and 90.54 degrees Fahrenheit.
a. Conversion formulas:
To convert a temperature in Fahrenheit to Celsius:
C = (F - 32) x 5/9
To convert a temperature in Celsius to Fahrenheit:
F = (C x 9/5) + 32
Conversion formula for another temperature scale (let's call it "Ginny scale") with a boiling point of water at 360 degrees and freezing point at 100 degrees:
To convert a temperature in Ginny scale to Celsius:
C = (G - 100) x 5/26
To convert a temperature in Celsius to Ginny scale:
G = (C x 26/5) + 100b.
To find the temperature value/reading on both Fahrenheit and Celsius scale will be the same, we can set the two formulas equal to each other and solve for the temperature value:
C = (F - 32) x 5/9F
= (C x 9/5) + 32(C - 32) x 5/9
= (C x 9/5) + 32(5/9)C - 160/9
= 9/5CC - 160/9
= 1.8CC
= 160/9.8C
≈ 32.52 degrees Celsius
To convert Celsius to Fahrenheit, we can use the Celsius value we just found:
F = (32.52 x 9/5) + 32F
≈ 90.54 degrees Fahrenheit
Therefore, the temperature value/reading on both Fahrenheit and Celsius scale will be approximately 32.52 degrees Celsius and 90.54 degrees Fahrenheit.
The Ginny scale is not needed to solve this part of the question.
Learn more about Celsius scale from this link:
https://brainly.com/question/30762835
#SPJ11
a mineral composed of more than one chemical element would be classified as a _______ mineral.
A mineral composed of more than one chemical element would be classified as a compound mineral.
Minerals are inorganic substances that occur naturally and are usually crystalline in form. They are composed of various chemical elements and have a definite atomic structure. Mineralogy is the science that studies minerals, including their physical and chemical properties.
Minerals can be classified into different groups based on various criteria, such as their chemical composition, crystal structure, and other characteristics. The classification of minerals is based on the dominant anion or anionic group in their chemical composition and the basic type of crystal structure. Mineral compounds are composed of two or more elements and are held together by chemical bonds. They are the most common type of minerals found on Earth.
Learn more about minerals: https://brainly.com/question/1333886
#SPJ11
which of the following is a layer of material that is installed outside of the stude to provide structural stability, insulation, and an underlaying for siding
The sheathing is a layer installed on the exterior of a structure to provide structural stability, insulation, and a base for siding, enhancing the building's durability and energy efficiency.
The sheathing is a layer of material that is installed on the exterior of a structure, typically on the studs, to provide structural stability, insulation, and a base for siding. It serves as a protective barrier against external elements and helps to maintain the integrity and strength of the building.
Sheathing materials can vary and may include plywood, oriented strand board (OSB), or other composite panels. These materials are durable and resistant to moisture, providing a solid foundation for attaching exterior finishes such as siding.
In addition to providing structural stability, sheathing also contributes to the insulation of the building envelope. It helps to reduce heat loss or gain, improving energy efficiency and creating a more comfortable indoor environment.
Overall, sheathing plays a crucial role in supporting the exterior finishes of a building, enhancing its durability, thermal performance, and aesthetic appeal.
learn more about structural stability here:
https://brainly.com/question/32913460
#SPJ11
Draw a stucture and give the systematic name of a compound with the molecular formula C5H12 that has:
(a) one tertiary carbon
(b) three secondary carbons
The question is asking for two different answers: one structure for (a) and one structure for (b)
(a) The structure is 2,2-dimethylbutane with one tertiary carbon. It consists of a central chain of four carbon atoms with a methyl group attached to the second carbon. (b) The structure is 2,3-dimethylbutane with three secondary carbons. It has a central chain of four carbon atoms, and there are methyl groups attached to the second and third carbons.
(a) Structure:
H
|
H - C - H
|
C
/ \
H - C - H
|
C
|
C(CH3)3
Systematic Name: 2,2-dimethylbutane
(b) Structure:
H - C - H
|
H - C - H
|
C
/ \
H - C - H
|
C
|
H - C - H
Systematic Name: 2,3-dimethylbutane
(a) The structure with one tertiary carbon (a tertiary carbon is bonded to three other carbon atoms) is depicted in the main answer. It is a branched molecule with a central chain of four carbon atoms and one methyl group attached to the second carbon. The name of this compound is 2,2-dimethylbutane, as per the IUPAC systematic naming convention.
(b) The structure with three secondary carbons (a secondary carbon is bonded to two other carbon atoms) is shown in the main answer. It is also a branched molecule with a central chain of four carbon atoms, and two methyl groups are attached to the second and third carbons. The name of this compound is 2,3-dimethylbutane, according to the IUPAC naming rules.
learn more about carbon atoms here:
https://brainly.com/question/13990654
#SPJ11
7. Ammonia can be formed by reacting
nitrogen and nydrogen gases.
N₂(g) + 3H₂(g) → 2NH3
If the rate of disappearance of hydrogen
-2.7 x 10-² what is the rate of formation of ammonia
is
The rate of formation of ammonia is approximately -1.8 x 10⁻² units (per unit time) based on the given rate of disappearance of hydrogen.
What is the rate of the formation of ammonia?The balanced equation for the reaction is:
N₂(g) + 3H₂(g) → 2NH₃(g)
According to the stoichiometry of the reaction, for every 3 moles of hydrogen (H₂) consumed, 2 moles of ammonia (NH₃) are formed.
Given that the rate of disappearance of hydrogen (-2.7 x 10⁻² is negative, indicating its consumption, we can determine the rate of formation of ammonia using the stoichiometric ratio.
Rate of formation of ammonia = (Rate of disappearance of hydrogen) × (2/3)
Rate of formation of ammonia = (-2.7 x 10^(-2)) × (2/3)
Rate of formation of ammonia ≈ -1.8 x 10^(-2) (units depend on the units of the rate given)
Learn more about rate of reactions at: https://brainly.com/question/12904152
#SPJ1
What type of organic compound contains the following functional group? A carbonyl group, which is an oxygen atom double-bonded to a carbon atom, bonded between two different carbon atoms. Ketone Ester Alde
The type of organic compound that contains the following functional group, a carbonyl group, which is an oxygen atom double-bonded to a carbon atom, bonded between two different carbon atoms is called a Ketone.
Organic compounds are a class of chemical compounds that contain one or more carbon atoms and are found in living organisms. Carbohydrates, lipids, proteins, and nucleic acids are examples of organic compounds found in living organisms.
A ketone is an organic compound with a carbonyl group, which is a carbon atom double-bonded to an oxygen atom, bonded to two other carbon atoms in the compound. Ketones are a type of carbonyl compound, and they are often used in organic chemistry because they are easy to produce and work with. Ketones are used in a variety of applications, including solvents, fragrances, and pharmaceuticals.
Thus, ketone contains the mentioned functional group.
To learn more about ketone :
https://brainly.com/question/15859478
#SPJ11
Draw condensed structural formulas for the following compounds. Use line structures for rings.
a. 1,4-diethylcyclohexene
b. 2,4-dimethyl-1-octene
c. 2,2-dimethyl-3-hexyne
The numbers in the other structures indicate the positions of the substituents methyl groups on the main carbon chain. The triple bond in structure c indicates a triple bond between the two carbon atoms.
Here are the condensed structural formulas using line structures for the given compounds:
a. 1,4-diethylcyclohexene:
CH₃ CH₃
CH₂ = CH₂
CH₂ CH₂
CH₂ - CH₂
CH₃ CH₃
b. 2,4-dimethyl-1-octene:
CH₃ CH₃
CH₃ - C - C - C - C - C - C - C - CH₃
CH₂
c. 2,2-dimethyl-3-hexyne:
CH₃ CH₃
CH₃
CH₃ H
In these structures, the carbon atoms are represented by vertices (intersections or ends of lines), and the lines represent bonds between the carbon atoms. The lines in the ring structure of cyclohexene indicate a cyclic arrangement of carbon atoms, and the numbers indicate the positions of the substituents (ethyl groups). The numbers in the other structures indicate the positions of the substituents (methyl groups) on the main carbon chain. The triple bond in structure formula c indicates a triple bond between the two carbon atoms.
The image is given below.
To know more about structural formula:
https://brainly.com/question/30764590
#SPJ4
Consider the chemical equation.
2NBr3 + 3NaOH Right arrow. N2 + 3NaBr + 3HOBr
If there are 40 mol of NBr3 and 48 mol of NaOH, what is the excess reactant?
N2
NBr3
NaOH
HOBr
The excess reactant in the given chemical equation is NaOH. This can be determined by comparing the stoichiometric ratios of NBr3 and NaOH in the balanced equation. The equation shows that 2 moles of NBr3 react with 3 moles of NaOH. Therefore, for every 3 moles of NaOH, we need 2 moles of NBr3. In this case, there are 48 moles of NaOH, which is more than the required amount. Thus, NaOH is the excess reactant.
To determine the excess reactant, we compare the stoichiometric ratios of the reactants in the balanced equation. The coefficient of NBr3 is 2, indicating that 2 moles of NBr3 react with 3 moles of NaOH. We can set up a ratio to calculate the required amount of NBr3 for 48 moles of NaOH:
(2 moles NBr3) / (3 moles NaOH) = (x moles NBr3) / (48 moles NaOH)
Solving for x, we find:
x = (2/3) * 48 = 32 moles NBr3
Since we have 40 moles of NBr3, which is more than the required amount of 32 moles, NBr3 is not the excess reactant. Therefore, the remaining reactant, NaOH, must be the excess reactant. It means there is an excess of 48 - 32 = 16 moles of NaOH, which will not be fully consumed in the reaction.
for such more questions on equation
https://brainly.com/question/11904811
#SPJ8
Methanol, ethanol, and n-propanol are three common alcohols. When 3.00 g of each of these alcohols is burned in air, heat is liberated. Calculate the heats of combustion of these alcohols in kJ/mol.
(a) methanol (CH3OH), -22.6 kJ
(b) ethanol (C2H5OH), -29.7 kJ
(c) n-propanol (C3H7OH), -33.4 kJ
The heats of combustion of methanol, ethanol, and n-propanol are -241.2 kJ/mol, -456.6 kJ/mol, and -669.3 kJ/mol respectively.
Methanol, ethanol, and n-propanol are three common alcohols. When 3.00 g of each of these alcohols is burned in air, heat is liberated. The heats of combustion of these alcohols in kJ/mol can be calculated by using the formula given below;
ΔH = -q/moles of alcohol
First, calculate the moles of each alcohol by using the given mass of the alcohol and its molar mass.The molar masses of methanol (CH3OH), ethanol (C2H5OH) and n-propanol (C3H7OH) are:32.04 g/mol46.07 g/mol60.09 g/mol
For methanol (CH3OH): 3.00 g CH3OH × 1 mol CH3OH/32.04 g CH3OH = 0.0935 mol CH3OH
For ethanol (C2H5OH): 3.00 g C2H5OH × 1 mol C2H5OH/46.07 g C2H5OH = 0.0653 mol C2H5OH
For n-propanol (C3H7OH): 3.00 g C3H7OH × 1 mol C3H7OH/60.09 g C3H7OH = 0.0499 mol C3H7OH
The ΔH of each alcohol can now be calculated using the formula and the given values, as shown below;
(a) methanol (CH3OH)ΔH = -q/moles of CH3OHΔH
= -(q/0.0935 mol CH3OH)
Since 3.00 g of methanol liberated -22.6 kJ of heat during combustion, therefore
q = -(-22.6 kJ)
= +22.6 kJΔH
= -(22.6 kJ/0.0935 mol CH3OH)ΔH
= -241.2 kJ/mol CH3OH
Therefore, the heat of combustion of methanol in kJ/mol is -241.2 kJ/mol.
(b) ethanol (C2H5OH)ΔH = -q/moles of C2H5OHΔH
= -(q/0.0653 mol C2H5OH)
Since 3.00 g of ethanol liberated -29.7 kJ of heat during combustion, therefore
q = -(-29.7 kJ)
= +29.7 kJΔH
= -(29.7 kJ/0.0653 mol C2H5OH)ΔH
= -456.6 kJ/mol C2H5OH
Therefore, the heat of combustion of ethanol in kJ/mol is -456.6 kJ/mol.
(c) n-propanol (C3H7OH)ΔH = -q/moles of C3H7OHΔH
= -(q/0.0499 mol C3H7OH)
Since 3.00 g of n-propanol liberated -33.4 kJ of heat during combustion, therefore
q = -(-33.4 kJ)
= +33.4 kJΔH
= -(33.4 kJ/0.0499 mol C3H7OH)ΔH
= -669.3 kJ/mol C3H7OH
Therefore, the heat of combustion of n-propanol in kJ/mol is -669.3 kJ/mol.
Therefore, the heats of combustion of methanol, ethanol, and n-propanol are -241.2 kJ/mol, -456.6 kJ/mol, and -669.3 kJ/mol respectively.
Learn more about the heat of combustion from the given link-
https://brainly.com/question/30794605
#SPJ11
Which of the following is NOT a fundamental subatomic unit of an element?
O Ionic
O Polar
O Covalent
O Nucleus
What is crisscross method for lead (ii) sulphide (need picture)
The crisscross method is a technique used to determine the chemical formula of a compound, including lead (II) sulphide.
How is this so?In this method, the charges of the ions involved are crossed over and used as subscripts for the opposite ion.
For lead (II) sulphide,the lead (II) ion has a charge of +2, and the sulphide ion has a charge of -2.
When crisscrossing the charges, the formula forlead (II) sulphide becomes PbS.
The crisscross method is important because it allows us to accurately determine the chemical formula of a compound, providing essential information about the composition and ratio of elements present.
Learn more about crisscross method:
https://brainly.com/question/13883338
#SPJ1
ATOMIC STRUCTURE and CHEMICAL BONDING Exercise One: Atomic Structure Using a periodic table, create accurate atomic structures of Argon (Ar) and Calcium (Ca) as done in class. A. Determine the number of protons, neutrons, and electrons for each atom. Include their locations (nucleus or orbitals). B. Place the correct number of electrons in each shell. C. Draw the Lewis-dot diagram of these atoms. D. Would this atom be chemically reactive or stable (inert)? Why?
A. For Argon (Ar): Protons = 18, Neutrons = 22, Electrons = 18. B. Electron shell configuration: 2-8-8. C. Lewis-dot diagram: Ar: ··· ··· •. D. Argon is chemically stable (inert). For Calcium (Ca): Protons = 20, Neutrons = 20, Electrons = 20. B. Electron shell configuration: 2-8-8-2. C. Lewis-dot diagram: Ca: • • • • • • • •. D. Calcium is chemically reactive.
A. Argon (Ar) has an atomic number of 18, indicating that it has 18 protons. Since it is a neutral atom, it also has 18 electrons. The atomic mass of Argon is approximately 40, so subtracting the atomic number from the atomic mass, we find that Argon has 22 neutrons. Protons and neutrons are located in the nucleus of the atom, while electrons are located in orbitals surrounding the nucleus.
B. The electron shell configuration of Argon is 2-8-8, indicating that the first shell (closest to the nucleus) can hold up to 2 electrons, the second shell can hold up to 8 electrons, and the third shell can also hold up to 8 electrons.
C. The Lewis-dot diagram represents the valence electrons of an atom. For Argon, all the electrons are in the inner shells, so the Lewis-dot diagram only shows the symbol of Argon (Ar) with no dots.
D. Argon is chemically stable (inert) because its electron shell configuration is complete with 8 electrons in the outermost shell. This full outer shell makes it unlikely for Argon to gain or lose electrons and form chemical bonds with other atoms.
A. Calcium (Ca) has an atomic number of 20, indicating that it has 20 protons. It is a neutral atom, so it also has 20 electrons. The atomic mass of Calcium is approximately 40, so it has 20 neutrons.
B. The electron shell configuration of Calcium is 2-8-8-2, indicating that the first shell can hold up to 2 electrons, the second shell can hold up to 8 electrons, the third shell can also hold up to 8 electrons, and the fourth shell can hold up to 2 electrons.
C. The Lewis-dot diagram of Calcium shows the symbol Ca with 2 dots representing the valence electrons in the outermost shell.
D. Calcium is chemically reactive because it has 2 valence electrons in its outermost shell. This means it can easily lose these electrons to achieve a stable electron configuration, resulting in the formation of positive ions and the formation of chemical bonds with other elements.
Learn more about Protons
brainly.com/question/12535409
#SPJ11
what is the percent composition of sodium hydrogen carbonate nahco3
The percent composition of sodium hydrogen carbonate (NaHCO3) is:
Sodium (Na) = 27.37%, Hydrogen (H) = 1.19%, Carbon (C) = 14.27%, Oxygen (O) = 57.17%
Sodium hydrogen carbonate, commonly known as baking soda, has the chemical formula NaHCO3. The percent composition of NaHCO3 is as follows:
Composition
Percent composition by mass:
Sodium (Na)27.37%
Hydrogen (H)1.19%
Carbon (C)14.27%
Oxygen (O)57.17%
To calculate the percent composition of each element, we need to use its atomic weight and divide it by the formula weight of NaHCO3. Then, multiply by 100 to get the percent. The atomic weights of Na, H, C, and O are 22.99, 1.01, 12.01, and 16.00, respectively. The formula weight of NaHCO3 is:
Na = 1 x 22.99 = 22.99
H = 1 x 1.01 = 1.01
C = 1 x 12.01 = 12.01
O = 3 x 16.00 = 48.00
Total formula weight = 84.01
Now, we can calculate the percent composition of each element:
Na = (22.99/84.01) x 100 = 27.37%
H = (1.01/84.01) x 100 = 1.19%
C = (12.01/84.01) x 100 = 14.27%
O = (48.00/84.01) x 100 = 57.17%
Therefore, the percent composition of sodium hydrogen carbonate (NaHCO3) is:
Sodium (Na) = 27.37%
Hydrogen (H) = 1.19%
Carbon (C) = 14.27%
Oxygen (O) = 57.17%
Learn more about percent composition:
https://brainly.com/question/12247957
#SPJ11
The number of entities in a mole (to 4 significant figures) is equal to ____________ multiplied by 10 to the power of ____________ and is called Avogadro's number..
The number of entities in a mole (to 4 significant figures) is equal to 6.022 x 10²³ multiplied by 10 to the power of 0 and is called Avogadro's number.
Avogadro's number is the number of atoms or molecules present in one mole of a substance. It is denoted by 'NA'.It is the amount of particles present in 12 grams of carbon-12. It is equal to 6.02214179(30) × 10²³ mol⁻¹. It is dimensionless and it is approximately equal to 6.022 x 10²³, which means one mole of any substance contains 6.022 x 10²³ entities.
Amedeo Avogadro, an Italian physicist who made substantial advances to our understanding of molecular theory, is honoured by having his number named after him. It is essential to comprehend the connection between the macroscopic world of substances and reactions and the tiny world of atoms and molecules since it represents a fundamental idea in chemistry.
Learn more about Avogadro's number at https://brainly.com/question/28812626
#SPJ11
ssume it takes 5.00 min to fill a 45.0−gal gasoline tank. (1 U.S. gal=231 in.
3
) ta) Calculate the rate at which the tank is filled in gallons per second. gal/5 (b) Calculate the rate at which the tank is filled in cubic meters per second. m
3
/5 (c) Determine the time interval, in hours, required to fill a 1.00−m
3
volume at the same rate. (1 U.S. gal =231 in.
3
)
(a) The rate at which the tank is filled is 9 gallons per minute or 1.5 gallons per second.
(b) The rate at which the tank is filled is approximately 0.0571 cubic meters per second.
(c) It would take approximately 6.28 hours to fill a 1.00 cubic meter volume at the same rate.
To calculate the rate at which the tank is filled in gallons per second, we divide the volume of the tank (45.0 gallons) by the time taken to fill it (5.00 minutes). This gives us a rate of 9 gallons per minute. To convert it to gallons per second, we divide by 60 since there are 60 seconds in a minute, resulting in 1.5 gallons per second.
To convert the rate of filling from gallons per second to cubic meters per second, we need to convert gallons to cubic meters. Since 1 U.S. gallon is equal to 231 cubic inches and 1 cubic meter is equal to 1,000,000 cubic centimeters, we can use unit conversions to find that approximately 0.0571 cubic meters are filled per second.
To determine the time interval required to fill a 1.00 cubic meter volume at the same rate, we can use the rate calculated in part (b). Dividing the volume of 1.00 cubic meter by the rate of 0.0571 cubic meters per second, we find that it would take approximately 17.5 seconds to fill 1.00 cubic meter. Converting this to hours, we divide by 3600 (the number of seconds in an hour), which gives us approximately 6.28 hours.
Learn more about gallons
brainly.com/question/31702678
#SPJ11
