The U-tube is rotated about the left arm at a speed of 4.2 rad/s. The distance between the centers of the two arms of the U-tube open to the atmosphere is 30 cm, and both arms contain 20-cm-high alcohol.
We need to determine the elevation difference between the fluid surfaces in the two arms.In order to determine the elevation difference between the fluid surfaces in the two arms, we'll use Bernoulli's equation as follows:P₁ + ρgh₁ + 1/2 ρv₁² = P₂ + ρgh₂ + 1/2 ρv₂²Here, P₁ and P₂ are the pressures at points 1 and 2, respectively. ρ is the density of the fluid. h₁ and h₂ are the heights of points 1 and 2, respectively. v₁ and v₂ are the velocities of the fluid at points 1 and 2, respectively. Since both the arms contain alcohol, their density is the same.
Therefore, the density term cancels out from both sides of the equation. P₁ and P₂ are atmospheric pressures, so they are also the same. We can ignore them. The velocity at point 1 is zero because it's at rest. We need to find the difference in elevation, so we can subtract h₁ from h₂.
Therefore, the equation becomes:0 + 0 + 0 = 0 + (h₂ - h₁)g + 1/2 v₂²where g is the acceleration due to gravity, and we've ignored the factor of 1/2 ρv₁² since v₁ is zero. The velocity of the fluid at point 2 can be calculated using the formula:v = ωrwhere ω is the angular velocity, and r is the radius of rotation. Since the U-tube is rotated about the left arm, the radius of rotation is 15 cm.
Therefore, v = 4.2 × 0.15 = 0.63 m/s. Substituting this value in the equation, we get:0 = (h₂ - h₁)9.8 + 1/2 (0.63)²Rearranging the terms, we get:(h₂ - h₁) = (1/2 × 0.63²)/9.8 = 0.020 mTherefore, the elevation difference between the fluid surfaces in the two arms is 0.020 m. Answer: 0.020 m.
To know more about elevation difference between the fluid surfaces visit:
https://brainly.com/question/29526589
#SPJ11
Problem Statement
The purpose of the Survey of Construction (SOC) is to provide national and regional statistics on starts and completions of new single-family and multifamily housing units and statistics on sales of new single-family houses in the United States. The Construction Price Indexes provide price indexes for single-family houses sold and for single-family houses under construction. The houses sold index incorporates the value of the land and is available quarterly at the national level and annually by region. The indexes for houses under construction are available monthly at the national level. The indexes are based on data funded by HUD and collected in the Survey of Construction (SOC).
You have been consulted to present these visualization results for single-family houses sold and for single-family houses under construction to The Department of Housing and Urban Development. With the given context, you need to create visualizations to effectively understand the data and create a dashboard using TABLEAU. (Use the concepts learned in the class).
The objectives include
Demonstrate the VISUALISATION CONTEXT
KNOW YOUR AUDIENCE(First question is answered for you)
List the primary groups or individuals to whom you’ll be communicating.
The Department of Housing and Urban Development
If you had to narrow that to a single person, who would that be?
What does your audience care about?
What action does your audience need to take?
What is at stake? What is the benefit if the audience acts in the way you want them to? What are the risks if they don’t?
WHAT?
What is that you are trying to communicate? What questions are you trying to answer/display in your visualizations? Write these as specific questions. You need to come up with 3 questions at least, each of which will be answered using one Viz.
Data preparation needed to answer the specific queries must be done.
Present the BIG IDEA.
It should: (1) articulate your point of view, (2) convey what’s at stake, and (3) be a complete (and single!) sentence.
HOW?
Chart 1: What type of viz did you create? Why did you select the viz that you did?
Chart 2: What type of viz did you create? Why did you select the viz that you did?
Chart 3: What type of viz did you create? Why did you select the viz that you did?
For each of the Visualisation, identify at least 3 Gestalt principles employed.
For each of the Visualisation, mention how you strategically used pre-attentive attributes to draw the audience's attention.
The primary audience for the presentation is The Department of Housing and Urban Development. However, if it has to narrow down to a single person, that would be the department’s Chief Executive Officer.
The audience cares about how the statistics of starts and completions of new single-family and multifamily housing units, and sales of new single-family houses in the United States will affect the department's efforts to provide national and regional statistics on housing units and to facilitate the availability of affordable homes to the citizens of the United States.The audience needs to take necessary action to fund projects that support affordable housing. The benefits of the audience's actions are increased affordability of homes to US citizens, reducing the homeless population, and improving the economy.
The United States' affordable housing statistics indicate that new single-family and multifamily housing units are essential in reducing the homeless population and improving the economy.CHARTS AND VISUALIZATION TYPESChart 1: A line graph was created to show the variations in Construction Price Indexes over the years. A line chart is an excellent visualization choice for demonstrating trends over a time period. The line graph presents a clear picture of how the Construction Price Index has varied over the years.Gestalt principles employed: The Gestalt principles employed in the line graph are proximity and continuity. Pre-attentive attributes used to draw attention are color and size.Chart
2: A filled map was created to show the variations in single-family house prices among the different regions in the United States. A filled map is an ideal visualization choice for showing variations in values between different geographical locations. The filled map presents a clear picture of how the prices vary in different regions.Gestalt principles employed: The Gestalt principles employed in the filled map are proximity, similarity, and closure. Pre-attentive attributes used to draw attention are color and size.Chart
3: A bar graph was created to show the trends in single-family houses sold and under construction over the years. A bar graph is an excellent visualization choice for comparing values across categories. The bar graph presents a clear picture of the trends in single-family houses sold and under construction over the years.Gestalt principles employed: The Gestalt principles employed in the bar graph are similarity and continuity. Pre-attentive attributes used to draw attention are color and size.
To know more about Department visit:
brainly.com/question/18464390
#SPJ11
The domain for each relation described below is the set of all positive real numbers. Select the correct description of the relations. x is related to y if y=1/x Symmetric Not Symmetric Question 9 1 pts The domain for each relation described below is the set of all positive real numbers. Select the correct description of the relations. x is related to y if ⌊x⌋≤⌊y⌋. Symmetric Anti-Symmetric Neither Question 10 1 pts The domain for each relation described below is the set of all positive real numbers. Select the correct description of the relations. x is related to y if x+y=1 Symmetric Anti-Symmetric Neither
The relation "x is related to y if y = 1/x" is not symmetric and The relation "x is related to y if ⌊x⌋ ≤ ⌊y⌋" is symmetric.
A relation is symmetric if for every (x, y) pair that satisfies the relation, the reverse (y, x) pair also satisfies the relation. In this case, if y = 1/x, then x = 1/y. However, this is not true for all positive real numbers. For example, if x = 2, y = 1/2 satisfies the relation, but 2 = 1/(1/2) does not. Therefore, the relation is not symmetric. A relation is symmetric if for every (x, y) pair that satisfies the relation, the reverse (y, x) pair also satisfies the relation. In this case, if ⌊x⌋ ≤ ⌊y⌋, then ⌊y⌋ ≤ ⌊x⌋ is also true. Since the floor function ⌊⌋ rounds down to the nearest integer, if y is a larger integer than x, then x is also less than or equal to y. Therefore, the relation is symmetric.
To know more about symmetric click the link below:
brainly.com/question/32296111
#SPJ11
Cultural Anthropology Help
Question 3 consists of (2) fill in the blank
One prominent way to view culture is that it normalizes and
standardizes how we should think and act in our everyday lives.
Cultural Anthropology is the branch of anthropology concerned with the study of human cultures, their beliefs, practices, values, ideas, economies, social relations, and histories. Culture plays a significant role in everyday life, and it can be viewed in many different ways.
One prominent way to view culture is that it normalizes and standardizes how we should think and act in our everyday lives. This is because culture is learned behavior that is passed down from one generation to the next, and it provides a framework for understanding the world around us.Culture is what shapes our perception of the world and the values and norms that we live by. It is the set of beliefs, customs, practices, and social behaviors that define a particular group of people. Culture is not static, and it changes over time as a result of a variety of factors, including technological innovation, migration, and globalization.Cultural Anthropologists study how people interact with each other, their environment, and their cultures. They seek to understand the ways in which culture shapes our beliefs, values, and behaviors, and how these in turn shape the societies and communities in which we live.
To know more about anthropology visit:
brainly.com/question/32453599
#SPJ11
A router does not know the complete path to every host on the internet - it only knows where to send packets next. a true b. false 1.2 Every destination address matches the routing table entry 0.0.0.0/0 a. True b. False
The statement: A router knows the complete path to every host on the internet is False.
A router does not have knowledge of the complete path to every host on the internet. Instead, it only knows the next hop or the next router to which it should forward the packets in order to reach their intended destination. Routing tables in routers contain information about network addresses and associated next hop information, allowing the router to make decisions on where to send packets based on their destination IP addresses.
Regarding the second statement, the routing table entry 0.0.0.0/0 is commonly known as the default route. It is used when a router doesn't have a specific route for a particular destination address. The default route is essentially a catch-all route, used when no other route matches the destination address. Therefore, it does not imply that every destination address matches this entry.
Learn more about Router
brainly.com/question/32243033
#SPJ11
Consider the sites of Gobekli Tepe and Catalhoyuk for this question. Do you think that the driving force of change in SW Asia was environmental change or social change? Why do you think people adopted agriculture in this region? Was it to deal with an environment that was constantly in flux, or was it to support a growing, more social, more culturally complex population? Note that there really isn't a "right" answer to this question, as archaeologists have been debating it for about 100 years.
The sites of Gobekli Tepe and Catalhoyuk have been a topic of debate on whether the driving force of change in Southwest Asia was environmental change or social change.
As far as the adoption of agriculture is concerned in the region, it can be concluded that it was for supporting a growing, more social, more culturally complex population.Adoption of AgricultureThe adoption of agriculture in Southwest Asia was a key development that marked the transition from the Paleolithic era to the Neolithic era. The shift was prompted by changes in social and environmental factors. Archaeologists and scholars have for many years been trying to determine whether the development was necessitated by the environment or social changes.The Emergence of Social ChangeThe emergence of social change in Southwest Asia led to a change in cultural activities and the way of life for humans.
The increased population created a demand for food. Agriculture allowed for the growth of crops and an abundant supply of food, which was necessary for the growing population. The growth in population led to a shift from a simple way of life to a more complex one. It is from this shift that the construction of monumental structures such as those found in Catalhoyuk emerged.Environmental FactorsThe environmental changes that occurred in Southwest Asia during the period are not enough to warrant the adoption of agriculture. Even though there were significant changes in the environment such as drought, the people could have survived by foraging. The droughts and arid land could have led to a decline in the population, which could have necessitated a change in social structure and the adoption of agriculture
To know more about Southwest visit:
brainly.com/question/10162001
#SPJ11
7 of 20
While driving off road, your travel path crosses a slope. Which of the following practices will help you
reduce the risk of rollover?
Slow down and maintain a controlled speed when driving on slopes. Excessive speed can increase the chances of losing control and rolling over. It's crucial to stay within a safe and manageable speed range.
How to explain the informationWhen encountering a slope, try to approach it at a right angle whenever possible. This helps to distribute the vehicle's weight more evenly across the wheels and reduces the risk of tipping over.
When driving uphill or downhill, aim to navigate the slope in a straight line. Avoid traversing diagonally across the slope, as it can shift the center of gravity and increase the chances of a rollover. Going straight minimizes the lateral forces acting on the vehicle.
Learn more about driving on
https://brainly.com/question/1071840
#SPJ1
What operations are required by our IndexedListInterface but not by our ListInterface?
The IndexedListInterface is a sub-interface of the ListInterface that adds methods for accessing elements of the list by their index.
The methods required by the IndexedListInterface but not by the ListInterface are:get(index: int): E: Returns the element at the specified position in the list.set(index: int, element: E):
Replaces the element at the specified position in the list with the specified element.add(index: int, element: E):
Inserts the specified element at the specified position in the list.remove(index: int):
Removes the element at the specified position in the list and shifts any subsequent elements to the left to fill the gap.
Learn more about interface list at:
https://brainly.com/question/28272710
#SPJ11
The IndexedListInterface is a collection interface that extends ListInterface with the added feature of indexing elements and being able to retrieve them by their indices.
The IndexedListInterface can perform all operations that the ListInterface does, plus indexing operations.What operations are required by our IndexedListInterface but not by our ListInterface?The additional operations that are required by our IndexedListInterface but not by our ListInterface are the ability to retrieve an element at a specific index, set the element at a specific index, add an element at a specific index, and remove an element at a specific index. These methods are not available in the ListInterface but are necessary in an indexed list because they allow elements to be accessed, updated, and added at specific positions in the list, rather than just at the beginning or end.As a result, the IndexedListInterface is more versatile than the ListInterface, as it allows for greater control over the position of elements within the collection. However, the IndexedListInterface is more complex to implement because it must maintain the integrity of the indices even as elements are added, removed, or reordered within the list.
To know more about element visit:
https://brainly.com/question/13794764
#SPJ11
4. Answer the following questions (27 points first 3 parts are 5 points each pard d is 12 points) a. What is sand production and what are the problems related to sand production? b. What are conventional historical sand-control completion practices; what is the major disadvantage of gravel pack completion? c. Why frac-pack completions is called a modern sand exclusion technique? d. For a friction angle of 20 and rock cohesion of 1000 psi, draw the line representing the Mohr-Coulomb criterion. Given a maximum stress of 4500 psi, calculate the minimum stress that gives a Mohr circle tangent to the Mohr- Coulomb criterion at point M, and also determine the critical failure stress values namely, Oc and Tc at M.
minimum stress that gives a Mohr circle tangent to the Mohr-Coulomb criterion at point M is 4471.47 psi and the critical failure stress values at point M are Oc=2914.18 psi and Tc=-202.71 psi.
Sand production refers to the solids production problem during the drilling, completion, or production of a well. Sand production occurs when sand and rock fragments separate from the formation and move to the wellbore. It is a significant problem in the oil and gas industry as it leads to increased downtime, equipment wear and tear, formation damage, and production losses. sand-control methods include slotted liners, screens, gravel packs, and frac packs. Gravel pack completion is the most popular method of sand control used in the industry because it is relatively cheap and can be easily installed. However, gravel pack completions have the major disadvantage of being prone to sand production if not correctly installed or when the formation is poorly consolidated Frac-pack completion is a modern sand control technique that involves packing gravel and then fracturing the formation to produce a highly conductive path.
To know more about stress visit:
brainly.com/question/15012695
#SPJ11
Consider a special case of the 0-1 knapsack problem in which the order of the items sorted by increasing weight is the same as their order when sorted by decreasing value. Give an efficient algorithm to find an optimal solution (for this special case) that maximizes the value of the packed items. And argue that your algorithm is correct.
In the case of the 0-1 knapsack problem, the order of the items sorted by increasing weight is the same as their order when sorted by decreasing value. The problem involves packing a knapsack with a maximum weight capacity and choosing which items to put inside.
The objective is to maximize the value of the packed items given the constraints.The dynamic programming algorithm can be used to solve the knapsack problem. In this algorithm, a table of size n+1 by W+1 is used. Here, n is the number of items, and W is the maximum capacity of the knapsack. The table will be used to calculate the maximum value that can be obtained for each subproblem.For the special case of the 0-1 knapsack problem, the following algorithm can be used to find an optimal solution that maximizes the value of the packed items:1. Sort the items by decreasing value.2. Initialize a table of size n+1 by W+1 to 0.3. For each item i in the sorted list, starting from the first item, do the following: a. For each weight w from W down to wi, do the following: i. Set the value of the current cell in the table to the maximum of its current value and the value of the cell in the previous row and column w - wi, plus the value of the current item.4. Return the value in the bottom-right corner of the table as the maximum value that can be obtained for the given knapsack.5. Use backtracking to find the items that were selected to achieve the maximum value. To do this, start at the bottom-right corner of the table and follow the path of cells with the maximum value until the first row is reached. Then, include the item corresponding to each cell in the path.The algorithm is correct because it takes advantage of the special property of the items being sorted by increasing weight and decreasing value. By iterating through the sorted list of items in this way, the algorithm ensures that items with a higher value are selected first, even if they are heavier than items with a lower value. This approach maximizes the value of the packed items while staying within the weight capacity of the knapsack.
To know more about knapsack visit:
https://brainly.com/question/30036373
#SPJ11
a pediatrician would use this instrument for viewing the interior of the eye
A pediatrician would use an ophthalmoscope for viewing the interior of the eyes.
Ophthalmoscope is an instrument used by pediatricians and other physicians to examine the interior of the eye.
The ophthalmoscope, an important diagnostic tool in ophthalmology, enables doctors to view the retina, optic disc, macula, and other parts of the eye in detail.
The ophthalmoscope is designed to allow physicians to view the interior of the eye through the pupil. With the help of an ophthalmoscope, doctors can diagnose and monitor a variety of eye disorders, such as glaucoma, cataracts, and macular degeneration.
Learn more about ophthalmoscope at:
https://brainly.com/question/30588197
#SPJ11
A pediatrician is a doctor who specializes in treating babies, toddlers, and children up to the age of 18. Pediatricians are well-equipped to diagnose, treat, and illnesses. Because they deal with such young patients, pediatricians must have access to a variety of specialized medical instruments,
One such instrument is an ophthalmoscope. An ophthalmoscope is a handheld instrument that is used to view the interior of the eye. It allows doctors to examine the retina, optic disc, and other structures of the eye to identify any signs of damage or disease.
Pediatricians might use an ophthalmoscope to diagnose a variety of eye conditions in children. For example, they might use it to look for signs of strabismus (a misalignment of the eyes), cataracts (cloudy areas on the lens of the eye), or glaucoma (increased pressure in the eye that can damage the optic nerve)
In addition to an ophthalmoscope, they might also use other specialized instruments to examine different parts of the eye.
To know more about ophthalmoscope visit:
https://brainly.com/question/32369879
#SPJ11
1. Use sf_restaurant_health_violations for the following problems: 1. Select columns business_name, inspection_score, inspection_type, violation_description, risk_category 2. Select only the rows where inspection_score is less than 90 3. Select only the rows where inspection_type does not equal 'Routine - Unscheduled' 4. Pick 5 business_name (at your choosing) and returns just those five and the columns above 5. Now do the opposite from problem 4 and return all business_name that are not the from above 6. Select only the rows where inspection_score is between 30 and 70 7. Select all rows where violation_description contains 'infestation' 8. Select all rows where violation_description contains 'infestation' and risk_category is 'High Risk' 9. Select all rows where violation_description contains 'infestation' and risk_category is 'High Risk' or inspection_score is greater than 95 2. Use airbnb_search_details for the following problems: 1. What is the total amount of airbnb searchs 2. How many unique cities are there in the table 3. Find the avg, min, max log_price for each city 4. Find the avg, min, max bathrooms and bedrooms for each city and property_type 5. Which property type has the most expensive log_price 1. and the least expensive log_price 6. How many cities have an avg log price greater than 5
To solve the given problems, we will use the datasets "sf_restaurant_health_violations" and "airbnb_search_details". By applying the appropriate SQL queries, we can extract the desired information from the datasets and perform the required calculations and filtering.
What information can we extract from the "sf_restaurant_health_violations" dataset?From the "sf_restaurant_health_violations" dataset, we can extract columns such as business_name, inspection_score, inspection_type, violation_description, and risk_category. We can also filter the data based on certain conditions and perform calculations on specific columns.
For the given dataset "sf_restaurant_health_violations", we can perform various operations to extract the desired information. The problems listed involve selecting specific columns, filtering rows based on conditions, and performing calculations on selected columns. By using SQL queries, we can easily accomplish these tasks.
The queries will involve selecting specific columns using the SELECT statement, filtering rows using the WHERE clause with appropriate conditions, and using aggregate functions like AVG, MIN, MAX to calculate summary statistics. The result of each query will provide the requested information based on the given dataset.
To learn more about SQL queries
brainly.com/question/30755095
#SPJ11
the horizontal sections of a steel frame are the ____________
The horizontal sections of a steel frame are the beams.
What components form the horizontal sections of a steel frame?Beams are essential elements in steel frames, providing horizontal support and distributing the load across the structure. They are typically made of steel and play a crucial role in maintaining the integrity and stability of the frame. Beams are designed to resist bending and shear forces, ensuring the overall structural strength.
They are commonly used in various construction projects, including buildings, bridges, and industrial structures. Beams come in different shapes and sizes, such as I-beams, H-beams, and C-beams, each with specific advantages depending on the application.
Learn more about Steel frames
brainly.com/question/29646764
#SPJ11
What is the output of an r-round Feistel network when the input is (L0, R0) in each
of the following two cases:
(a) Each round function outputs all 0s, regardless of the input. (b) Each round function is the identity function.
In both case (a) and case (b), the output of an r-round Feistel network will be the same as the input, which is (L0, R0).
In each of the above two scenarios, what is the output of an r-round Feistel network when the input is (L0, R0)?(a) No matter the input, every round function returns a single 0 value.
(b) The identity function is present in each round function.
In a Feistel network, the input is divided into two halves, L0 and R0. The network consists of multiple rounds, with each round applying a round function to the input. The output of the network is the final value of (L, R) after all the rounds.
(a) In this case, where each round function outputs all 0s regardless of the input, the output of the Feistel network will depend on the number of rounds, denoted as r. The value of (L, R) does not change over the course of the rounds because the round functions always return 0.
Therefore, the output of the Feistel network will be (L0, R0).
(b) In this case, where each round function is the identity function, the output of the Feistel network will again depend on the number of rounds, denoted as r.
The identity function returns its input unchanged. Therefore, in each round, the value of (L, R) remains the same. As a result, the output of the Feistel network will also be (L0, R0), as the input is preserved throughout the rounds.
Learn more about r-round Feistel network
brainly.com/question/31390806
#SPJ11
‘No Silver Bullet, Essence and Accidents of Software Engineering’, published in 1986, Brook’s put forward the argument that software engineering will always be a hard activity with unpredictable results.
In his analysis Brooks categorised the difficulties in software engineering as being either essential or accidental. Discuss the four essential difficulties.
Software engineering has inherent essential difficulties, including complexity, conformity, changeability, and invisibility, which make it a challenging and unpredictable activity, as highlighted by Fred Brooks in his 1986 paper "No Silver Bullet."
How are software engineering difficulties categorized?In his seminal paper "No Silver Bullet: Essence and Accidents of Software Engineering," published in 1986, Fred Brooks argued that software engineering is inherently challenging and that there is no single, magical solution to make it easy. He categorized the difficulties in software engineering as being either essential or accidental. Let's discuss the four essential difficulties identified by Brooks:
1. Complexity: Software systems are inherently complex due to the intricacy of the problems they aim to solve, the numerous interactions between system components, and the need to accommodate various user requirements. Managing this complexity and ensuring that the system functions correctly can be a daunting task.
2. Conformity: Software must conform to its intended purpose, which involves aligning with the desired functionality, performance, and quality requirements. Achieving this conformity can be challenging due to the evolving nature of user needs, changing technology landscapes, and the difficulty of accurately capturing and translating user requirements into working software.
3. Changeability: Software systems need to evolve and adapt over time to accommodate changing user needs, technological advancements, and business requirements. However, making changes to software can introduce new complexities, dependencies, and potential issues, making it challenging to maintain and modify the system effectively.
4. Invisibility: Unlike physical artifacts, software is intangible and lacks a direct visual representation. This makes it difficult to comprehend and reason about the behavior, structure, and correctness of software solely through observation. The invisible nature of software introduces challenges in ensuring its reliability, quality, and adherence to specifications.
According to Brooks, these essential difficulties are inherent to software engineering and cannot be entirely eliminated. They contribute to the complexity and unpredictability of software development and require careful management, skilled practitioners, and continuous improvement practices to mitigate their impact.
Learn more about Software Engineering
brainly.com/question/29217721
#SPJ11
Which of the following can be used to replace /* missing loop header */ so that the code segment will work as intended?
a. for (int h = 0; h < k; h++)
b. for (int h = 1; h < k + 1; h++)
c. for (int h = 0; h < 3; h++)
d. for (int h = k; h >= 0; h--)
e. for (int h = k; h <= 0; h--)
To replace /* missing loop header */ and make the code segment work as intended, option (a) for (int h = 0; h < k; h++) should be used.
Which option allows the code segment to work?In the given code segment, the missing loop header needs to be replaced to ensure the intended functionality. Option (a) for (int h = 0; h < k; h++) is the correct choice to achieve this.
The loop initializes the variable h to 0 and continues iterating as long as h is less than the value of k. With each iteration, h is incremented by 1. This allows the loop to run for a specific number of times based on the value of k.
The loop header in the code segment determines the starting value, condition, and iteration of the loop. By choosing option (a) for (int h = 0; h < k; h++), the loop starts with h = 0, continues as long as h is less than k, and increments h by 1 in each iteration.
This ensures that the loop will execute the desired number of times, based on the value of k. It provides a flexible and adaptable approach to control the loop's behavior, making it a suitable replacement for the missing loop header.
Learn more about code segment
brainly.com/question/30614706
#SPJ11
the ratio of circumferential stress to longitudinal stress in a thin cylinder subjected to an internal pressure is
The ratio of circumferential stress to longitudinal stress in a thin cylinder subjected to an internal pressure is equal to 1:1.
Is the ratio of circumferential stress to longitudinal stress in a thin cylinder under internal pressure balanced?In a thin cylinder subjected to an internal pressure, the ratio of circumferential stress to longitudinal stress is 1:1. This means that the magnitude of the circumferential stress is equal to the magnitude of the longitudinal stress.
The circumferential stress, also known as hoop stress, acts tangentially to the cylinder's cross-section and is responsible for preventing the cylinder from expanding radially. On the other hand, the longitudinal stress acts along the length of the cylinder and resists the forces trying to pull it apart.
In a thin-walled cylinder, where the thickness is much smaller than the cylinder's radius, the stress distribution can be approximated as uniform across the thickness. Under these conditions, the ratio of circumferential stress to longitudinal stress remains constant and equal to 1:1. This ratio holds true regardless of the specific value of the internal pressure or the dimensions of the cylinder.
Learn more about internal pressure
brainly.com/question/13091911
#SPJ11
.How many grams of silver can be plated onto the cathode of an electrolysis cell if a current of 6.8 A is passed though the cell for 72 minutes? Faraday's constant is 9.65 × 10^4 C/mol
Approximately 0.0306 grams of silver can be plated onto the cathode.
How can the grams of silver plated be determined using Faraday's law?To calculate the grams of silver plated onto the cathode, we can use Faraday's law of electrolysis. First, we need to convert the time from minutes to seconds:
72 minutes = 72 * 60 = 4320 seconds
Next, we can use the formula:Amount of silver plated (in grams) = (Current * Time) / (Faraday's constant * Number of electrons transferred)
Since one mole of silver ions requires one mole of electrons to plate onto the cathode, the number of electrons transferred is 1.
Plugging in the given values:
Amount of silver plated = (6.8 A * 4320 s) / (9.65 × [tex]10^4[/tex] C/mol * 1)
Calculating the result:
Amount of silver plated = 0.0306 grams
Therefore, approximately 0.0306 grams of silver can be plated onto the cathode of the electrolysis cell.
Learn more about grams of silver
brainly.com/question/22789612
#SPJ11
determine the mean and variance of the random variable with the following probability mass function. f(x)=(8/7)(1/2)x, x=1,2,3 round your answers to three decimal places (e.g. 98.765).
The mean of the random variable is 1.143, and the variance is 0.272.
What are the calculated mean and variance?The probability mass function given is f(x) =[tex](8/7)(1/2)^x[/tex], where x can take the values 1, 2, or 3. To determine the mean and variance of this random variable, we need to calculate the expected value and the expected value of the squared variable, respectively.
To find the mean, we sum up the products of each value of x with its corresponding probability:
E(X) = [tex](1)(8/7)(1/2)^1 + (2)(8/7)(1/2)^2 + (3)(8/7)(1/2)^3[/tex]= 1.143 (rounded to three decimal places).
Next, we calculate the expected value of the squared variable:
[tex]E(X^2) = (1^2)(8/7)(1/2)^1 + (2^2)(8/7)(1/2)^2 + (3^2)(8/7)(1/2)^3[/tex] = 1.714.
Using these values, we can find the variance:
Var(X) = [tex]E(X^2) - [E(X)]^2 = 1.714 - (1.143)^2[/tex]= 0.272 (rounded to three decimal places).
In summary, the mean of the random variable is 1.143, and the variance is 0.272.
Learn more about variance
brainly.com/question/14116780
#SPJ11
explain why it isn’t necessary to create an inbound rule on the windows 2k8 r2 internal 1 machine so that it can receive the response (icmp echo reply) from the windows 2k8 r2 internal 2 machine.
By default, Windows Server 2008 R2 allows incoming ICMP Echo Replies without any specific configuration or firewall rule, making it unnecessary to create an inbound rule for receiving ICMP Echo Replies.
Why is it unnecessary to create an inbound rule on Windows Server 2008 R2 internal machine to receive ICMP Echo Replies from another internal machine?In the context of Windows Server 2008 R2, ICMP (Internet Control Message Protocol) is a network protocol that is commonly used for diagnostic and troubleshooting purposes. It includes messages such as ICMP Echo Request (ping) and ICMP Echo Reply.
When a Windows 2008 R2 internal machine sends an ICMP Echo Request (ping) to another internal machine, it is initiating a network communication. In this scenario, it is not necessary to create an inbound rule on the Windows 2008 R2 internal machine that is receiving the ICMP Echo Reply.
The reason for this is that by default, Windows Server 2008 R2 allows inbound ICMP Echo Replies without any specific configuration or firewall rule. The Windows Firewall, which is enabled by default on Windows Server 2008 R2, allows incoming ICMP Echo Replies to be received and processed by the internal machine without any additional configuration.
Therefore, when the Windows 2008 R2 internal machine sends an ICMP Echo Request to another internal machine and receives an ICMP Echo Reply, the ICMP Echo Reply will be automatically accepted and processed by the receiving machine, and no additional inbound rule needs to be created.
However, it is worth noting that if there are any specific firewall rules or configurations in place that restrict ICMP traffic or block certain types of network communications, then it may be necessary to create appropriate inbound rules to allow ICMP Echo Replies to be received. This is typically a consideration in more complex network environments with customized firewall configurations.
Learn more about Windows Server
brainly.com/question/30402808
#SPJ11
Determine The Step Response V(T) For T > 0 In The Circuit Below. 2 Ω Ot=0 + 8 V + 12 V F Mo 1 H
The step response V(T) for T > 0 in the circuit is 8 V. It reaches a steady state where the entire voltage is dropped across the resistor.
In the given circuit, we have a voltage source with a value of 12 V and a resistor with a resistance of 2 Ω. The resistor is in series with an inductor having an inductance of 1 H.
When a step input is applied to the circuit, the inductor resists changes in current. Initially, when the input voltage changes from 0 V to 8 V (as given in the question), the inductor opposes this change by generating a back EMF to keep the current constant. Since the initial current is 0 A, the back EMF is 0 V, and the full 8 V is applied across the resistor.
As the inductor builds up its magnetic field, the current starts to increase, and the voltage across the inductor decreases. However, this process takes time due to the inductor's inherent property of opposing changes in current. Eventually, the inductor reaches a steady state where the current becomes constant, and the voltage across the inductor becomes 0 V.
Therefore, after a certain period of time, known as the transient period, the circuit settles into a steady state. In this steady state, the inductor acts like a short circuit, and the entire 8 V is dropped across the resistor. Hence, the step response V(T) for T > 0 in the circuit is 8 V.
Learn more about step response
brainly.com/question/33215947
#SPJ11
If the system in the previous problem is started with initial conditions x1(0) = 0, x2(0) = 1, x1(0) = 0, and x2(0) = 0, show that the equations of motion are as follows: Xi(t) = 0,447 cos Wit -0.447 coswat X2(t) = 0,772 cos Wit +0.278 coswat 01 = 0.382k / m w2 = 12.618k/m
The equations of motion for the system with initial conditions x1(0) = 0, x2(0) = 1, x1'(0) = 0, and x2'(0) = 0 are as follows:
x1(t) = 0.447 cos(√(0.382k/m)t) - 0.447 cos(√(12.618k/m)t)
x2(t) = 0.772 cos(√(0.382k/m)t) + 0.278 cos(√(12.618k/m)t)
In these equations, k is a constant representing the stiffness of the system and m is the mass of the system. The first equation, x1(t), represents the displacement of the first coordinate (x1) of the system over time. It consists of two cosine terms with different angular frequencies (√(0.382k/m) and √(12.618k/m)), each multiplied by a constant coefficient (0.447 and -0.447). The cosine function produces oscillatory behavior, and the different frequencies determine the shape and amplitude of the oscillations. Similarly, the second equation, x2(t), represents the displacement of the second coordinate (x2) of the system over time. It also consists of two cosine terms with different angular frequencies (√(0.382k/m) and √(12.618k/m)), but with different coefficient values (0.772 and 0.278). The cosine terms produce oscillations with different amplitudes and phases. By substituting the given values of k = 0.382 and w = 12.618k/m, we can compute the specific equations of motion for the system, which describe the time-dependent behavior of the system's coordinates.
Learn more about oscillations here:
https://brainly.com/question/30111348
#SPJ11
Write ALL the steps (including the derivations) of the solution algorithm for computing the developing flow in a circular pipe. Write down the equations, finite difference expressions, and the integral mass continuity balance. Write the solution steps, and a code layout
The steps for computing the developing flow in a circular pipe are defining the problem, formulating the governing equations, discretizing the equations using finite difference methods, solving the system of equations numerically, applying the mass continuity balance.
What are the steps for computing the developing flow in a circular pipe, including the equations, finite difference expressions, and the integral mass continuity balance?To compute the developing flow in a circular pipe, the following steps can be followed:
1. Define the problem: Specify the pipe geometry, fluid properties, and boundary conditions.
2. Formulate the governing equations: The Navier-Stokes equations for incompressible flow can be used. They include the continuity equation and the momentum equations in the radial and axial directions.
3. Discretize the equations: Apply finite difference methods to discretize the governing equations in both space and time. Express the derivatives as finite differences using appropriate approximations.
4. Solve the discretized equations: Set up a system of algebraic equations based on the discretized equations. Use numerical methods such as iterative solvers (e.g., Gauss-Seidel or successive over-relaxation) to solve the system and obtain the velocity and pressure profiles.
5. Apply the mass continuity balance: Integrate the radial velocity profiles over the pipe cross-section to ensure mass conservation. The integral of the radial velocity should be constant along the pipe.
6. Iterate and converge: Repeat steps 4 and 5 until the solution converges. Adjust the discretization parameters, such as grid spacing and time step, if needed.
7. Code layout: Implement the solution algorithm in a programming language of choice. Organize the code into functions or classes for clarity and modularity. Handle input/output operations, define data structures, and incorporate error handling and convergence criteria.
It is important to note that the specific details of the algorithm and code implementation may vary depending on the numerical method chosen and the desired level of accuracy.
Learn more about developing flow
brainly.com/question/28149228
#SPJ11
Myron and Patty both have blue eyes. Their first child had dark brown eyes. What must be true? Dark eyes (B) are dominant over blue eyes (b). O a. They were blessed. Dark eyes are beautiful. O b. Myron is not the Dad. O c. Patty is not the Mom. O d. There is only a 25% that Myron is the Dad. Value: 2 Farsightedness (F) is inherited as a dominant trait, while normal vision is recessive. John is farsighted and Mary has normal vision. If they have a child that is farsighted, what is its genotype? 0 a. FF O b. Ef 0 C. ff O d. FF or Ff, you cannot be certain. Value: 2 Farsightedness (F) is inherited as a dominant trait, while normal vision is recessive. John is farsighted and Mary has normal vision. If they have a child that has normal vision, what is its genotype? 0 a. FE O b. Ef 0 C. ff O d. FF or Ff, there is no way to be certain.
The main answer to the question "Myron and Patty both have blue eyes. Their first child had dark brown eyes. What must be true?" is: c. Patty is not the Mom.
What is the likely conclusion regarding the child's eye color?Eye color inheritance is determined by specific genes passed down from parents. In this case, Myron and Patty both have blue eyes, indicating that they possess the blue eye color gene (b). However, their first child having dark brown eyes suggests the presence of the dominant dark eye color gene (B).
Dark eyes (B) are considered dominant over blue eyes (b). This means that if an individual has at least one copy of the dominant dark eye gene (B), their eye color will be dark, regardless of whether they also have a copy of the recessive blue eye gene (b). Blue eyes (b) will only be expressed if both copies of the eye color gene are for blue eyes.
Since Myron and Patty both have blue eyes, it implies that they can only pass on the blue eye gene (b) to their child. If their child has dark brown eyes, it indicates that the child inherited the dominant dark eye gene (B) from the other parent. Consequently, the likely conclusion is that Patty is not the biolo zgical mother of the child.
Learn more about the Eye color
brainly.com/question/8066010
#SPJ11
2.4 give a sketch of each of the following signals. (a) y1(t) = 2 sinc (πt/3) (b) y2(t) = δ(t) − π(t − 2) (c) y3(t) = 4sgn(t 2)
(a) y1(t) = 2 sinc (πt/3)The signal y1(t) = 2 sinc (πt/3) is known as sinc pulse, also called a low-pass filter. The sinc pulse has an infinite duration and zero width.
It starts from the origin and passes through all the minima at (t = nT, n is an integer, T is the sampling interval) and returns to the origin. At t = 0, y1(t) = 2. The plot of y1(t) for 5 periods is shown below.(b) y2(t) = δ(t) − π(t − 2)The signal y2(t) = δ(t) − π(t − 2) is known as a ramp pulse. It starts from t = -∞, increases linearly with time till t = 2 seconds, and remains constant thereafter.
It has a value of -2π for t = 0 and a value of zero for t = 2.The plot of y2(t) is shown below. It starts from the origin, increases linearly with time till t = 2 seconds, and remains constant thereafter.(c) y3(t) = 4sgn(t2)The signal y3(t) = 4sgn(t2) is known as the signum function.
To know more about normalized visit:
https://brainly.com/question/31603870
#SPJ11
the tooth numbers for the gear train illustrated are n2 = 20, n3 = 16, n4 = 30, n6 = 36, and n7 = 46. gear 7 is fixed. if shaft a is turned through 10 revolutions, how many turns will shaft b make?
The shaft B will make 23 turns when shaft A is turned through 10 revolutions.
How can the number of turns of shaft b be calculated based on the gear train configuration and revolutions of shaft a?To determine how many turns shaft B will make when shaft A is turned through 10 revolutions, we need to calculate the gear ratio between the two shafts.
The gear ratio is given by the formula:
Gear Ratio = (Number of Teeth on Driven Gear) / (Number of Teeth on Driving Gear)
In this case, shaft B is the driven gear, and shaft A is the driving gear.
Given the tooth numbers:
n2 = 20 (driving gear)
n3 = 16
n4 = 30
n6 = 36
n7 = 46 (driven gear)
First, let's find the gear ratio between shafts A and B:
Gear Ratio (A to B) = n7 / n2 = 46 / 20 = 2.3
This means that for every revolution of shaft A, shaft B will turn 2.3 revolutions.
Since shaft A is turned through 10 revolutions, we can calculate the number of turns shaft B will make as follows:
Turns (B) = Turns (A) * Gear Ratio (A to B) = 10 * 2.3 = 23
Therefore, shaft B will make 23 turns when shaft A is turned through 10 revolutions.
Learn more about gear
brainly.com/question/30985272
#SPJ11
when installing conduit in reinforced concrete, it is best to use a
When installing conduit in reinforced concrete, it is best to use a masonry bit.
What is conduit?Conduit is a tube or other non-flexible material in which electrical cables are housed. The use of conduit is necessary for protection against electric shock, mechanical injury, and chemical damage in the wiring system.
Conduit is utilized to run the wiring through various places to get them from one point to another. It provides extra support and protection to wires, reducing the risk of damage from external factors, and it is crucial in shielding wires in underground installations.
A masonry bit is a type of drill bit used to drill holes in concrete, brick, and other masonry materials. It is designed to drill through tough and hard materials that are difficult to drill through using other drill bits.
Learn more about conduit at:
https://brainly.com/question/32303926
#SPJ11
When installing conduit in reinforced concrete, it is best to use a concrete saw to cut channels and then attach conduit clamps. Conduit is a type of protective casing used to house and protect electrical wiring. It is available in various materials such as PVC, metal, and fiberglass.
It is available in various materials such as PVC, metal, and fiberglass. Conduits are usually installed in various locations and may involve a range of techniques depending on the material used.The conduit can be installed in reinforced concrete, which is a type of concrete that has steel bars or fibers embedded to provide it with greater strength and durability. When installing conduit in reinforced concrete, it is best to use a concrete saw to cut channels and then attach conduit clamps. This process is also referred to as the "chasing method."The chasing method is a very common installation method. It involves cutting a channel into the concrete, laying the conduit in it, and then filling the channel with a patching compound.It is best to use a metal conduit that is resistant to damage, corrosion, and bending.The conduit should be cut to length and deburred to remove any sharp edges.
To know more about metal visit:
https://brainly.com/question/29404080
#SPJ11
A 0.5-m^(3) rigid tank contains 15-kg of Re-134a at 500 kPa. What is the temperature in the tank, in °C?
To determine the temperature in the tank, we can use the ideal gas equation PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the universal gas constant, and T is temperature expressed in Kelvin.
So, to find the temperature of Re-134a in the tank, we must use the ideal gas law as follows:P = 500 kPaV = 0.5 m³n = mass / molar mass = 15 kg / 102.03 kg/kmol = 0.147 molesR = 8.314 kJ/kmol · K
Using these values in the ideal gas equation, we can solve for T: PV = nRT500 kPa · 0.5 m³ = 0.147 mol · 8.314 kJ/kmol · K · T250 kJ = 1.222 KJ/K · mol · T204.36 K = T (in Kelvin) Converting from Kelvin to Celsius yields: T = 204.36 K - 273.15 = -68.79 °C
Therefore, the temperature in the tank is -68.79 °C.
To know more about ideal gas equation visit:
https://brainly.com/question/28837405
#SPJ11
The following Book class is used to represent books and print information about each book. Each Book object has attributes for the book title and for the name of the book's author. public class Book private String title; private String author; public Book (String t, String a) title = t; author = a; public void printBookInfo() System.out.print(title + ", written by " + author); (a) The PictureBook class is a subclass of the Book class that has one additional attribute: a String variable named illustrator that is used to represent the name of the illustrator of a picture book. The PictureBook class also contains a printBookInfo method to print the title, writer, and illustrator of a picture book. Consider the following code segment. PictureBook myBook = new PictureBook ("Peter and Wendy", "J.M. Barrie", "F.D. Bedford"); myBook.printBookInfo(); The code segment is intended to print the following output. Peter and Wendy, written by J.M. Barrie and illustrated by F.D. Bedford Complete the PictureBook class below. Your implementation should conform to the example above. public class PictureBook extends Book (write your class using pencil in a separate page) Unit 9 Inheritance and Polymorphism FRQ (a) (b) (c) Consider the following books. • A book titled Frankenstein, written by Mary Shelley A picture book titled The Wonderful Wizard of Oz, written by L. Frank Baum and illustrated by W.W. Denslow The following code segment is intended to represent the two books described above as objects bookl and book2, respectively, and add them to the ArrayList myLibrary. ArrayList myLibrary = new ArrayList(); /* missing code */ myLibrary.add(bookl); my Library.add(book2); (b) Write a code segment that can be used to replace /* missing code */ so that bookl and book 2 will be correctly created and added to my Library. Assume that class PictureBook works as intended, regardless of what you wrote in part (a). (write your code segment using pencil in a separate page) The BookListing class is used to generate a descriptive listing for a book. The BookListing constructor takes a Book object and a double value as parameters and uses them to print information about the book, along with its price. Assume that book1 and book2 were created as specified in part (b). The following table demonstrates the intended behavior of the BookListing class using objects book1 and book2. Code Segment Result Printed BookListing listing1 = new BookListing (book1, 10.99); Frankenstein, written by Mary Shelley, $10.99 listingl.printDescription(); BookListing listing2 = new BookListing (book2, 12.99); The Wonderful Wizard of Oz, written by L. Frank Baum and illustrated by W.W. Denslow, $12.99 listing2.print Description(); (c) Complete the BookListing class below. Your implementation should conform to the examples. Assume that class PictureBook works as intended, regardless of what you wrote in part (a). public class BookListing (write your class using pencil in a separate page)
Once you have completed the code for each part, you can check the intended behavior provided in the table to verify that your code is working correctly.
Please provide a specific question or task that you would like assistance with.The given question consists of multiple parts, and each part involves writing code or completing a class definition. '
Here's a breakdown of each part:
In this part, you need to create a subclass called PictureBook that extends the Book class. The PictureBook class should have an additional attribute named "illustrator" (a String variable) to represent the name of the illustrator. The class should also include a printBookInfo() method that prints the title, writer, and illustrator of the picture book.This part involves creating two book objects, book1 and book2, and adding them to an ArrayList called "myLibrary.
" You need to write a code segment that correctly creates book1 and book2 as specified in the question and then adds them to myLibrary.In this part, you are required to complete the BookListing class. The BookListing class has a constructor that takes a Book object and a double value (representing the price) as parameters. The class should have a printDescription() method that prints the information about the book along with its price.Each part of the question requires writing or completing a specific class definition.It's recommended to write the code using a pencil and paper, as indicated in the question.
If you have any specific questions or need assistance with a particular part, please let me know!
Learn more about provided
brainly.com/question/9944405
#SPJ11
A lake with a constant volume of 10 x 106 m3 is fed by a pollution-free stream with flow rate 50 m3/s. A factory discharges 5 m3/s of a non-conservative waste with concentration 100 mg/L into the lake. The pollution has a reaction rate coefficient K of 0.25/day. Assuming the pollution is well mixed in the lake, find the steady-state concentration of the pollution in the lake. 3. A lagoon with a volume of 1200m3
The steady-state concentration of pollutants in the lagoon is 0.4167 mg/L.
Volume of lake, V = 10 x 10⁶ m³
Flow rate of the pollution-free stream, F = 50 m³/s
Discharge rate of non-conservative waste by the factory, D = 5 m³/s
Concentration of non-conservative waste, C = 100 mg/L
Reaction rate coefficient, K = 0.25/day
For a steady state, the concentration of pollutants will remain constant over time. So, the inflow rate of pollutant = outflow rate of pollutant.
Inflow rate = F x 0 mg/L + D x 100 mg/L = 5 x 100 = 500 mg/s
Outflow rate = V x C
Steady-state concentration, C = Outflow rate / Volume of lake = 500 / (10 x 10⁶) = 0.05 mg/L
Therefore, the steady-state concentration of the pollution in the lake is 0.05 mg/L.
A lagoon with a volume of 1200m³:
A similar calculation can be done for the lagoon with a volume of 1200m³. If the inflow rate of the pollutant equals the outflow rate of the pollutant, then the steady-state concentration of the pollutant in the lagoon is:
Inflow rate = F x 0 mg/L + D x 100 mg/L = 0 + 5 x 100 = 500 mg/s
Outflow rate = V x C
Steady-state concentration, C = Outflow rate / Volume of lagoon = 500 / 1200 = 0.4167 mg/L
You can learn more about pollutants at: brainly.com/question/29594757
#SPJ11
Given,The lake has a constant volume of 10 × 106 m3.The stream feeds the lake at a flow rate of 50 m3/s.The factory discharges 5 m3/s of a non-conservative waste with a concentration of 100 mg/L.The reaction rate coefficient K of the pollution is 0.25/day.
As it is given that pollution is well mixed in the lake, the following formula can be used to find the steady-state concentration of the pollution in the lake:Steady-state concentration of pollution = [Total concentration of pollution in the lake]/[Total volume of the lake]Total concentration of pollution in the lake can be found using the formula:Incoming rate of pollution = Outgoing rate of pollution + Rate of increase in the lakeFor the given lake, incoming rate of pollution = Discharge of the factory = 5 m3/s.
The outgoing rate of pollution is equal to the rate of flow of water in the lake times the concentration of pollution in the lake.Therefore, outgoing rate of pollution = Flow rate of the stream × concentration of pollution in the stream= 50 × 100 × 10−6 mg/s.The rate of increase in the lake is the net difference between the incoming rate of water and the outgoing rate of water.Rate of increase in the lake = Incoming rate of water – Outgoing rate of water= Flow rate of the stream + Discharge of the factory= 50 + 5= 55 m3/s.
So,Total concentration of pollution in the lake = Incoming rate of pollution = Outgoing rate of pollution + Rate of increase in the lake= 5 = 50 × 100 × 10−6 + 55C ≈ 0.91 mg/L. (approx)The steady-state concentration of the pollution in the lake is 0.91 mg/L.A lagoon with a volume of 1200m3 cannot be evaluated using the above information, as it is not related to the given problem.
To know about pollution visit:
https://brainly.com/question/23857736
#SPJ11
the process of joining metal parts using an electric arc is known as
The process of joining metal parts using an electric arc is known as arc welding.
What is arc welding?Arc welding is a welding technique that employs an electric arc to melt and join metals. The arc welding process is used for a wide range of applications, including construction and repair of steel structures, fabrication of metal sculptures, and welding of heavy equipment.
The different types of arc welding techniques are:
Gas tungsten arc welding (GTAW)Gas metal arc welding (GMAW)Shielded metal arc welding (SMAW)Flux-cored arc welding (FCAW)Submerged arc welding (SAW)Plasma arc welding (PAW)Metal inert gas (MIG) weldingTungsten inert gas (TIG) weldingLearn more about Welding at:
https://brainly.com/question/19997700
#SPJ11
The process of joining metal parts using an electric arc is known as Arc welding. This process is the most extensively used welding process that involves the use of an electric arc to melt the base material and filler material to combine them. The electric arc burns between the electrode and the workpiece, producing intense heat.
An electric current is passed through an electrode to produce an arc which melts the metal at the welding point. An electrode is a metal rod with a coating that melts along with the metal. It offers the filler metal and flux that secures the weld from oxidation and other pollutants. It is a simple welding process that is used in the production of structures and construction projects. Each type of welding process has its advantages and disadvantages. The type of welding process selected depends on the thickness of the material, the type of metal, and the desired weld joint. Arc welding has high power consumption and requires the welder to be skilled in the welding process.
To know more about oxidation visit:
https://brainly.com/question/13182308
#SPJ11
