The element lithium has two naturally occurring isotopes. One of these has a mass of 6. 0151 amu and a natural abundance of 7. 49%. A second isotope has a mass of 7. 0160 amu and a natural abundance of 92. 51%. Calculate the atomic mass of lithium. Enter your answer in the provided box

It should be b

oil was formed from sea animals and bacteria or plants like algae. hope this helps!

The average rate of the reaction between 10 and 20 seconds is 0.0095 M.s⁻¹, the instantaneous rate of the reaction at 30 seconds is 0.00629 M.s⁻¹, the instantaneous rate of formation of O2 at 50 seconds is 0.003357  M.s⁻¹.

a) at 10s, [H₂O₂] - 0.75M ; at 20s, [H₂O₂] - 0.56M. Thus,

Rate = -[tex]\frac{1}{2}[/tex]Δ[tex]\frac{H_{2}O_{2} }{t_{} }[/tex] = -[tex]\frac{1}{2}[/tex][tex]\frac{-0.19M}{10s}[/tex] = 0.0095 M.s⁻¹

b)  Looking at the dotted line and picking as two points, the "intercepts" just for convenience-you could use any two points), I get the points (0 s, 0.78 M) and (62s, 0 M). Thus,

Rate = -[tex]\frac{1}{2}[/tex]Δ[tex]\frac{H_{2}O_{2} }{t_{} }[/tex] = -[tex]\frac{1}{2}[/tex][tex]\frac{-0.78M}{62s}[/tex] = 0.00629 M.s⁻¹

c) Looking at the dashed line, the y-intercept is (0 s, 0.55 M), and another point is (70. s. 0.08 M), Thus:

Rate = -[tex]\frac{1}{2}[/tex]Δ[tex]\frac{H_{2}O_{2} }{t_{} }[/tex] = -[tex]\frac{1}{2}[/tex][tex]\frac{-0.47M}{70s}[/tex] = 0.003357  M.s⁻¹

d) [H₂O₂]₆₀ - 0.22M ; [H₂O₂]₀ - 1.00M

thus Δ[H₂O₂] - 0.78M, [H₂O₂] was lost in the first 50sec

0.59molO₂

e)Looking at the dot dash line, we know that the y-intercept is 0s, 1.00M and the x-intercept is 36s, 0M. Thus,

Rate = -[tex]\frac{1}{2}[/tex]Δ[tex]\frac{H_{2}O_{2} }{t_{} }[/tex] = -[tex]\frac{1}{2}[/tex][tex]\frac{-1.00M}{36s}[/tex] = 0.0138 M.s⁻¹

To learn more about reaction rate, click here:

brainly.com/question/30546888

#SPJ4

It is true that polyethylene pipe performs optimally at low pressures of 10 to 20 psi.

PE pipes can be utilized in a range of temperature of -40 oC to 60 oC taking into account the change of operating pressure. The nominal pressure class, and PN, up to PN 20 or 20 bar, is frequently used in the standard specification of HDPE pipes to identify their class.

PVC is a long-lasting vinyl polymer, whereas HDPE is a petroleum-based polyethylene thermoplastic. Both pipes withstand high temperatures with strength. HDPE has been shown to be more durable when comparing failure ratings when subjected to conditions like rain, stress, wind, heat, or cold.

To know more about polyethylene visit:

https://brainly.com/question/29412928

#SPJ1

The best performance for polyethylene pipe occurs at low pressures of 10 to 20 psi, it is true.

When operating pressure changes, PE pipes are suitable for temperatures between -40 oC and 60 oC. To describe the class of HDPE pipes, the nominal pressure class, and PN, up to PN 20 or 20 bar, is usually used.

HDPE is a polyethylene thermoplastic made from petroleum, while PVC is a vinyl polymer with a long shelf life. The robustness of these pipes allows them to resist high temperatures. Comparing failure ratings in adverse situations like rain, stress, wind, heat, and chemicals has revealed HDPE to be more robust.

To know more about polyethylene visit:-

https://brainly.com/question/30366820

#SPJ1

The most oxygen atoms shared by pairs of neighbouring tetrahedra are found in double chain silicates, which is the most common kind of silicate.

This particular silicate consists of silicon atoms bound to other silicon atoms in a chain with oxygen atoms, with oxygen atoms forming the corners of the tetrahedra. As compared to other forms of silicates, these chains share oxygen atoms with neighbouring chains, leading to a higher percentage of oxygen atoms shared by pairs of adjacent tetrahedra. Due to the lack of connectedness between their tetrahedral units, other silicate types, such as sheet silicates and framework silicates, have a lower percentage of oxygen atoms shared by pairs of neighbouring tetrahedra. Because of this, double chain silicates have a tendency to be more dense and structurally complicated than other silicate kinds.

learn more about oxygen atoms here:

https://brainly.com/question/7695753

#SPJ4

Cation has more protons than electrons.

What traits do cations possess?

An ion with positive charge is referred to as a cation because it has more protons than electrons (negatively-charged particles). When an atom loses one or more electrons, cations are created because the total charge of the atom becomes positive due to the loss of the negatively charged electron(s).

If an atom loses one of its electrons, the atom will now have more protons than neutrons and will thus be positively charged. The ratio of electrons to protons will alter significantly upon the formation of a cation. Protons will outnumber electrons in number. No matter what kind of cations are created, the connection between protons and electrons remains the same.

To learn more about ion use:
https://brainly.com/question/13692734

#SPJ1

Answer:

Explanation:

In this scenario, the house can be considered as a thermodynamic system, and the transfer of energy between the system and its surroundings occurs through heat transfer.

On a hot day, the temperature inside the house is higher than the temperature outside, causing heat to flow from the house to the environment in order to balance the temperatures. This heat transfer occurs due to the difference in temperature between the house and the outside environment, and is facilitated by the air conditioning system.

The air conditioning system works by removing heat from inside the house and expelling it to the outside environment, thus cooling the air inside the house. This process of removing heat from the house and expelling it to the outside is a transfer of energy from the system (the house) to its surroundings.

The heat transfer from the house to the outside environment continues until the temperature inside the house reaches a state of thermal equilibrium with the temperature outside, at which point the transfer of heat stops. The air conditioning system continues to operate, however, to maintain the desired temperature inside the house by continuously removing heat and expelling it to the outside environment.

In summary, the transfer of energy between the house (the system) and its surroundings occurs through heat transfer, with heat flowing from the house to the outside environment due to the difference in temperature, and the air conditioning system facilitating this transfer by removing heat from inside the house and expelling it to the outside environment.

Parts of the population were liberated from the need on food collecting and hunting as a result of the rivers' provision of an abundance of drinkable water and fertile land to start cultivating food crops.

For more information on local river and community development kindly visit to

https://brainly.com/question/886777

#SPJ1

The total mass of the products is 125 g

The law of conservation of mass, also known as the principle of mass conservation, states that the total mass of a closed system remains constant over time, regardless of the changes that may occur within the system. This means that the mass of the system can change form, but the total mass remains the same.

The law of conservation of mass is a fundamental principle in physics and is widely accepted as a basic law of nature. It is based on the idea that matter can be neither created nor destroyed, only transformed from one form to another.

Learn more about the conservation of mass:https://brainly.com/question/13383562

#SPJ1

In  a lithium ion battery, redox reaction occurs and hence no change will occur in the system when the device is charging.

Redox reactions comprise of two parts a reduced part and an oxidized part, which occur simultaneously . The part which is reduced gain electrons and hence there is a increase in oxidation state of the species.

While, the part which is oxidized looses electrons and hence there is a decrease in oxidation state of the species.During redox reactions, there is no net change in the number of electrons . Electrons which are given off in oxidation are used up in reduction.

Learn more about redox reactions,here:

https://brainly.com/question/13978139

#SPJ1

An emission spectrum is a spectrum of light emitted by a substance, such as a gas or a solid, that is excited by heating or some other form of energy input.

The light emitted by the substance is characteristic of its composition and atomic structure, and can be used to identify the substance and determine its chemical composition.

An example of an emission spectrum is the spectrum of light emitted by a hydrogen gas. When hydrogen gas is excited by an electric discharge, it emits light in the form of a series of bright lines, each with a characteristic wavelength. This series of bright lines is known as the hydrogen emission spectrum, and it is used to identify the presence of hydrogen in a sample and determine its concentration.

Another example of an emission spectrum is the spectrum of light emitted by a neon sign. When a high voltage is applied to a tube filled with neon gas, the gas emits a characteristic red light. This light is produced by the emission of photons from the excited neon atoms, and the spectrum of light emitted is unique to neon.

In conclusion, an emission spectrum is a spectrum of light emitted by a substance that is excited by heating or some other form of energy input, and it is used to identify the substance and determine its chemical composition.

Learn more about spectrum here:

https://brainly.com/question/3997802

#SPJ4

30.7 g of CH3OH would need to be added to 270 g of water to lower its freezing point by 1.0 °C.

To determine the mass of CH3OH needed to lower the freezing point of 270g of water, we need to use the freezing point equation:

ΔT = Kf·m

To calculate the molality of the solution, we need to convert the mass of water to kilograms:

mass of water = 270 g = 0.27 kg

Since we are assuming that only CH3OH is being added to the water, the number of moles of CH3OH can be calculated using its mass and molar mass:

molar mass of CH3OH = 32.04 g/mol

moles of CH3OH = mass of CH3OH / molar mass of CH3OH.

using the freezing point :

ΔT = Kf·m

ΔT = [tex]T_{f}[/tex] - T0

where [tex]T_{f}[/tex] is the freezing point of the solution and T0 is the freezing point of pure water (0 °C).

Since we want to lower the freezing point of water, ΔT is negative, so we can rearrange the equation to solve for the mass of CH3OH:

mass of CH3OH = (ΔT / Kf) · molar mass of CH3OH · mass of solvent

Substituting the known values:

ΔT = -1.86 °C (the freezing point for a 1-molal solution of any solute in water)

T0 = 0 °C

molar mass of CH3OH = 32.04 g/mol

mass of solvent = 270 g = 0.27 kg

We can solve for m by rearranging the molality equation:

m = moles of solute/mass of solvent (in kg)

ΔT = Kf·m

-1.0 °C = (1.86 °C·kg/mol) · m

m = -0.538 mol/kg

Substituting the values into the mass equation:

mass of CH3OH = (-1.0 °C / (1.86 °C·kg/mol)) · 32.04 g/mol · 0.27 kg / (-0.538 mol/kg)

mass of CH3OH = 30.7 g

Therefore, 30.7 g of CH3OH would need to be added to 270 g of water to lower its freezing point by 1.0 °C.

learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ4

The pH of the base solution at the equivalence point is 11

To solve this problem, we need to use the principles of acid-base titration. Since ethylamine is a weak base, it will react with the strong acid solution to form its conjugate acid, ethylammonium ion.

We can start by writing the balanced chemical equation for the reaction between ethylamine (C2H5NH2) and hydrochloric acid (HCl):

C2H5NH2 + HCl → C2H5NH3+Cl-

From this equation, we can see that one mole of ethylamine reacts with one mole of HCl to form one mole of ethylammonium chloride (C2H5NH3+Cl-).

The next step is to calculate the number of moles of ethylamine that are present in the initial solution. We can use the formula:

moles = concentration x volume

Substituting the given values, we get:

moles of C2H5NH2 = 0.15 M x volume of C2H5NH2

Since we don't know the volume of the ethylamine solution, we can't calculate the moles of ethylamine yet. However, we can use the fact that when the solution is titrated with the HCl solution, the number of moles of HCl added will be equal to the number of moles of ethylamine present in the solution at the equivalence point. This is because all the ethylamine will react with the HCl to form ethylammonium ion.

We can therefore set up the equation:

moles of HCl added = moles of C2H5NH2 initially present

Since we know the concentration and volume of the HCl solution added, we can calculate the moles of HCl added:

moles of HCl added = 0.25 M x 0.03 L = 0.0075 moles

Substituting this value into the equation above, we get:

0.0075 moles = 0.15 M x volume of C2H5NH2

Solving for the volume of C2H5NH2, we get:

volume of C2H5NH2 = 0.0075 moles / 0.15 M = 0.05 L = 50 mL

Now that we know the volume of the ethylamine solution, we can calculate the concentration of ethyl ammonium ion at the equivalence point. Since the reaction between ethylamine and HCl is a 1:1 reaction, the moles of ethyl ammonium ion formed will also be 0.0075 moles. We can use the formula:

concentration = moles / volume

Substituting the given values, we get:

concentration of C2H5NH3+ = 0.0075 moles / 0.1 L = 0.075 M

Finally, we can calculate the pH of the solution at the equivalence point. Since ethylammonium ion is the conjugate acid of the weak base ethylamine, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([C2H5NH3+]/[C2H5NH2])

The pKa of ethylamine is approximately 10.6, so we can substitute this value and the concentration of ethylammonium ion into the equation:

pH = 10.6 + log(0.075/0.075)

Simplifying the equation, we get:

pH = 10.6 + log(1)

pH = 10.6

pH = 10.6 ≈ 11.

To learn more about PH value :

https://brainly.com/question/28580519

#SPJ4

NOx is the chemical compound that leads to the formation of photochemical smog in the troposphere when it reacts with other compounds in the presence of sunlight.

As nitrogen oxides and volatile organic compounds (VOCs) combine with sunlight, a mixture of pollutants called photochemical smog is produced, which explains why there is a brown cloud above cities. Due to the fact that we receive the most sunshine in the summer, it tends to happen more frequently. The three main components of photochemical smog are sunlight, hydrocarbons, and nitrogen oxides. While nitrogen oxides and hydrocarbons can also arise from natural processes and fossil fuel-burning generating plants, gasoline-powered automobiles are the primary source of these pollutants.

Here is more information about photochemical smog: brainly.com/question/27960448

#SPJ4

The Mass percent (m/m) = (14.85/264.85) x 100 = 5.59 %.

Mass is a measure of the amount of matter in an object. It is often measured in kilograms (kg) or grams (g). Mass is related to weight, which is the measure of the force of gravity on an object. While weight can change depending on the gravitational pull of the planet or object it is on, mass remains the same.

The number of moles of solute present can be calculated from the given information.
Number of moles = 0.254 moles
The mass of the solute can be calculated using the formula:
Mass of solute = Number of moles x Molecular mass
Molecular mass of NaCl = 58.44 g/mol
Therefore, Mass of solute = 0.254 x 58.44 = 14.85 g
The mass percent (m/m) of the solution can be calculated using the formula:
Mass percent (m/m) = (Mass of solute/Total mass of solution) x 100
Total mass of solution = Mass of water + Mass of solute
= 250 g + 14.85 g
= 264.85 g
Therefore, Mass percent (m/m) = (14.85/264.85) x 100 = 5.59 %

To learn more about Mass
https://brainly.com/question/24191825
#SPJ1

The giant crusher lifted the boulders and quickly pulverized them into a uniform gray powder.

Pulverization is defined as the process of applying an external force to a solid material of a certain size to destroy it and reduce it into pieces that are smaller than the original size. It has long been done for many materials including ore, glass, ceramics, grains, paints and medicines. The purpose of pulverization are for the pretreatment for separation of active ingredients, production of powder with particle size suitable for the purpose, surface modification of particles, formation of particles composites and the pretreatment of material synthesis. It is being used not only for reducing particle size but also as an operation for developing new materials.

To learn more about Pulverization please visit:

https://brainly.com/question/28964957

#SPJ4

The correct answer is

E) F2 can be classified as a weak electrolyte

The atomic number of fluorine is nine, and its chemical symbol is F. It is the palest halogen and is normally an exceedingly deadly pale yellow diatomic gas. It is the most electronegative reactive element and is extremely reactive, interacting with all other elements except for light inert gases.Fluorine atoms have nine electrons, one fewer than neon, and their electron configuration is 1s22s22p5—two in a full inner shell and seven in an empty outer shell. The physical properties of the atom are affected by the large effective nuclear charge (9 2 = 7) and insufficient nuclear shielding of the outer electrons.

To learn more about Fluorine click the link below

brainly.com/question/214125

#SPJ4

A gas's molecules move more quickly and collide with one another and the container walls more frequently as its temperature rises. The gas's density drops as a result of this increase in volume.

The density of the air within the balloon reduces as it heats up and expands. Pressure remained stable despite ongoing changes in volume and temperature. In contrast, a hot air balloon has a density that is initially equal to the air around it. . As the air inside it warms up, its density falls until it has a buoyant force acting on it that can lift not only the balloon but also the basket and passengers. Hot air balloons ascend into the air because the warmer, less dense air within the balloon has a lower density than the air outside (cooler air). The system is subject to a buoyant force because the balloon and basket move a fluid that is heavier than the balloon and basket.

Learn more about molecules here:

https://brainly.com/question/19922822

#SPJ4

Answer:

An ionic bond is a type of chemical bond formed by the attraction of two ions with opposite charges.

Explanation:

Answer:

An ionic bond is a type of chemical bond formed by the attraction of two ions with opposite charges. This bond is formed when a metal cation loses electrons to a nonmetal anion, resulting in the formation of positively and negatively charged ions that are attracted to each other.

Explanation:

The process of determining the concentration of a solution by slowly adding a known solution to it using a buret is commonly referred to as titration.

Titration is a laboratory technique that is widely used to determine the concentration of a solution. In this method, a buret is filled with a known solution of a specific concentration, often referred to as the titrant. A second solution, called the analyte, is placed in a flask or beaker and an indicator is added to it. The indicator is a chemical substance that changes color or exhibits some other type of visual change when it reacts with the titrant.

The buret is then used to slowly add the titrant to the analyte. The point at which the reaction between the titrant and analyte is complete is indicated by the change in the appearance of the indicator. This change marks the end point of the titration and is used to determine the concentration of the analyte.

Titrations can be performed for a variety of purposes, including determining the amount of an unknown substance in a sample, determining the purity of a substance, and determining the reaction rate between two substances. The technique is particularly useful because it is precise and accurate, and it can be used to determine the concentration of a wide range of substances, including acids, bases, and redox compounds.

Learn more about titration here:

https://brainly.com/question/2728613

#SPJ4

100 ml of substance b has the same mass as 50.0 ml of substance a.

To solve this problem, we need to use the formula:

density = mass/volume

We can rearrange this formula to solve for mass:

mass = density x volume

We can then use the masses of the two substances to find the volume of substance b that has the same mass as 50.0 ml of substance a.

First, let's find the mass of 50.0 ml of substance a:

mass of substance a = density of substance a x volume of substance a

= 2.20 g/ml x 50.0 ml

= 110 g

Next, let's find the volume of substance b that has the same mass as 50.0 ml of substance a by equating:

mass of substance b = mass of substance a

density of substance b x volume of substance b = density of substance a x volume of substance a

volume of substance b = (density of substance a x volume of substance a) / density of substance b

= (2.20 g/ml x 50.0 ml) / 1.10 g/ml

= 100 ml

Therefore, 100 ml of substance b has the same mass as 50.0 ml of substance a.

For similar question on mass of substance,

https://brainly.com/question/21334167

#SPJ4

10.54L of NH3 at 850°C and 5.00 atm are required to react with 1.00 mole of O2 in this reaction.

Given the temperature of NH3 = 850°C = 850 + 273 = 1123K

The pressure of NH3 = 5atm

Number of moles of O2 = 1

The volume of NH3 = V

The reaction equation is:

[tex]4NH3 + 7O2 --- > 4NO2 + 6H2O[/tex]

4 moles of ammonia and 7 moles of oxygen gas react.

1 mole of oxygen gas and 1 mole of ammonia react.

Ammonia is equal to 0.5714 moles.

From the equation of ideal gas law: PV = nRT where R = 0.0821 L atm/ K mol which is a gas constant such that:

[tex]5.00 atm * V = 0.5714 moles * 0.0821 L atm/ K mol * 1123K[/tex]  

V = 10.54 L

To learn more about NH3 click here https://brainly.com/question/16119085

#SPJ4

complete question: In the first step of the industrial process for making nitric acid, ammonia reacts with oxygen in the presence of a suitable catalyst to form nitric oxide and water vapor: 4NH3 + 7O2 -> 4NO2 + 6H2O. How many liters of NH3 at 850 °C and 5.00 atm are required to react with 1.00 mol of O2 in this reaction?

The correct order for atomic radius for Mg, Na, P, Si, and Ar is

d. Ar > Si > P > Na > Mg.

Atomic radius refers to the size of an atom, which is determined by the distance between the nucleus and the outermost electrons. The size of an atom decreases from left to right across a row in the periodic table because the number of protons in the nucleus increases, creating a stronger attractive force that pulls the electrons closer to the nucleus. The size of an atom also decreases from top to bottom within a group or column in the periodic table because the number of electron shells increases, resulting in a greater shielding effect that reduces the attractive force between the nucleus and outer electrons.

To learn more about Atomic radius here:

https://brainly.com/question/13607061

#SPJ4

The correct answer is

A reasonably straightforward technique for creating an estimate for an unknown parameter is maximum likelihood (MLE).

Assume that the random variables X1, , and Xn make up a random sample from the distribution f(x|); f(x|) is a point mass function for continuous random variables and a pdf for discrete random variables, respectively. We use the sign — to denote the fact that the distribution also depends on the parameter, which might be either a single parameter or a vector of parameters with real values. We define f(x1, , xn|) = f(x1|) f(xn|) for each observed random sample x1, , xn (1)

The joint probability is f(x1, , xn|) if f(x|) is pmf and the joint density function is f(x1, , xn|) if f(x|) is pdf. The likelihood function is now denoted by the notation f(x1, , xn|). As can be seen, the unknown parameter affects the likelihood function.

To learn more about MLE click the link below

brainly.com/question/30447662

#SPJ4

If we use 1.6 ml of pure ethyl acetate instead of a mixture of 0.8 ml of ethyl acetate and 0.8 ml of hexane as the reaction solvent, means that the reaction would take place in a more polar solvent than otherwise.

Ethyl acetate is a more polar solvent than hexane. Since the experiment calls for a Craig tube, we know that crystallization is an important component of the experiment.

This process is highly sensitive to the polarity difference between the solute (reaction product) and solvent. Therefore, we would expect more difficulty completing the experiment's crystallisation step when pure ethyl acetate is used as the solvent.

To learn more about polar solvent,

brainly.com/question/3184550

#SP J4

If the half-life of a certain radioactive material is 4 days. the length of time it will take for the material to decay to 17 of its original mass is 11.06 days.

To solve this problem, we can use the formula for exponential decay:

N(t) = N0 * (1/2)²(t/T)

where:

N(t) is the amount of the radioactive material remaining after time t

N0 is the initial amount of the radioactive material

T is the half-life of the radioactive material

We want to find the time it will take for the material to decay to 1/7 of its original mass, which means that N(t) = N0/7.

Using the formula above and plugging in the given values, we get:

N0/7 = N0 * (1/2)²(t/4)

Dividing both sides by N0 and taking the natural logarithm of both sides, we get:

ln(1/7) = ln(1/2)²(t/4)

ln(1/7) = (t/4) * ln(1/2)

t = (4/ln(1/2)) * ln(1/7)

t ≈ 11.06 days

Therefore, it will take approximately 11.06 days for the radioactive material to decay to 1/7 of its original mass, given a half-life of 4 days.

Learn more about decay here:

https://brainly.com/question/30258090

#SPJ4

The density of an object is its mass divided by volume. The mass of a the stopper is given 5.06 g with a volume of 4.2 ml . Then the density of the stopper is 1.2 g/ml.

Density of substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density depends on the bond type, temperature and pressure.

Volume of the object is the space occupied by its particles. Volume can be expressed in L, ml, cm³, dm³ etc. Only solids and liquids has a definite volume and the volume of gases is that of the container.

Give that, volume of water = 45.2 ml

Total volume = 49.4 ml.

then volume of stopper = 49.4 - 45.2 = 4.2 ml.

Mass of stopper = 5.06  kg

density  =  mass/volume

             = 5.06 g / 4.2 ml

             =  1.2 g/ml

Therefore, the density of the stopper is 1.2 g/ml.

Find more on density:

brainly.com/question/15164682

#SPJ1