The energy input that is part of the energy balance equation includes calories from ______.

The correct answer is True. The percent by mass of each element in a compound is known as the percent composition of a compound.

can you give me a brilliant mark?

The solution is going to have a pH of 12.7.

The pH uses a logarithmic scale with 7 as neutral, where lower values are more acidic and higher ones are more alkaline, to represent the acidity or alkalinity of a solution. The hydrogen ion concentration (c), expressed in moles per litre, determines the pH, which is equal to log10(c).

Now we know that;

pOH = - log(0.05M)

pOH = 1.3

pH = 14 - 1.3

= 12.7

We know that the above can be justified if we remember that pH +
pOH = 14

Learn more about pH:https://brainly.com/question/15289741

#SPJ1

Option 2- 6.63ml of ethanol is required to produce 10g of CO₂.

The chemical equation is not provided in the question. However, we can determine the amount of ethanol needed to produce 10.0 g of CO2 using stoichiometry.

The balanced chemical equation is:

C₂H₅OH + 3O₂ → 2CO2 + 3H₂O

From the equation, we can see that 1 mol of ethanol (C₂H₅OH) produces 2 mol of CO₂. The molar mass of ethanol is 46.07 g/mol, which means that 1 mL of ethanol has a mass of 0.789 g.

To determine the volume of ethanol needed, we first need to calculate the number of moles of CO₂ produced:

10.0 g CO₂× (1 mol CO2/44.01 g CO₂) = 0.227 mol CO₂

Since 1 mol of ethanol produces 2 mol of CO₂, we need half as many moles of ethanol:

0.227 mol CO₂ × (1 mol C₂H₅OH/2 mol CO₂) = 0.114 mol C₂H₅OH

Finally, we can use the density of ethanol to calculate the volume needed:

0.114 mol C₂H₅OH × (46.07 g/mol) ÷ (0.789 g/mL) = 6.63 mL

learn more about Moles here:

https://brainly.com/question/28239680

#SPJ4

Molecular orbitals result from combining atomic orbitals. Bonding orbitals are lower energy and more stable, while anti-bonding orbitals are higher energy and less stable, determining chemical bonding and properties.

Molecular orbitals are the result of the combination of atomic orbitals in a molecule. These orbitals can be either bonding or anti-bonding. Bonding orbitals are formed when atomic orbitals combine with the same phase, resulting in constructive interference and a lower energy level compared to the original atomic orbitals. On the other hand, anti-bonding orbitals are formed when atomic orbitals combine with opposite phases, resulting in destructive interference and a higher energy level compared to the original atomic orbitals.

The energy and stability of these orbitals depend on their relative positions in the energy diagram. Bonding orbitals are typically lower in energy than their constituent atomic orbitals, resulting in increased stability. In contrast, anti-bonding orbitals are typically higher in energy than their constituent atomic orbitals, resulting in decreased stability. The relative energy levels of these orbitals are important in determining the nature of chemical bonding and the properties of molecules.

Know more about Molecular orbitals here:

https://brainly.com/question/28178372

#SPJ11

The pattern of alternating between convection and diffusion in O2 transport in a person can be attributed to the different methods by which O2 is transported in the body.

Convection refers to the movement of O2 through the bloodstream with the help of the circulatory system, while diffusion refers to the movement of O2 through the tissues and cells by means of diffusion gradients. During exercise or physical exertion, for example, the body may require more O2 than what can be supplied by convection alone. In these cases, diffusion plays a more significant role in O2 transport as it enables a greater amount of O2 to be delivered to the tissues and cells. Conversely, during rest or low levels of activity, convection may be the primary method of O2 transport as the body requires less oxygen. Therefore, the alternating pattern of convection and diffusion in O2 transport is a natural and necessary process that enables the body to efficiently deliver oxygen to where it is needed.

Learn more about diffusion here

https://brainly.com/question/30097487

#SPJ11

Answer:

[tex]\boxed{\rm Al_{\,(s)}+Fe_2O_{\,(s)} \rightarrow Al_2O_{3\,(s)} + Fe_{\,(s)}}[/tex]

Explanation:

Aluminium metal + iron(I) oxide powder → aluminium oxide solid + iron metal

This is an example of a displacement reaction, with chemical equation:

[tex]\boxed{\rm Al_{\,(s)}+Fe_2O_{\,(s)} \rightarrow Al_2O_{3\,(s)} + Fe_{\,(s)}}[/tex]

To learn more about displacement reactions:

https://brainly.com/question/13219117

10.3g of solvent is needed to make a 68.4% by-mass solution using 22.5g [tex]FeCl_2[/tex].

To make a 68.4% by mass solution using 22.5g [tex]FeCl_2[/tex], we need to first calculate the mass of the solution, which is the sum of the mass of the solute and the mass of the solvent.

Let x be the mass of solvent needed.

The mass of the solution can be expressed:

Mass of solution = Mass of solute + Mass of solvent

Mass of solution = 22.5g [tex]FeCl_2[/tex] + x

Since the desired concentration is 68.4% by mass, we know that the mass percent of [tex]FeCl_2[/tex] in the solution is:

Mass percent of [tex]FeCl_2[/tex] = (Mass of [tex]FeCl_2[/tex] / Mass of solution) x 100

68.4 = (22.5 / (22.5 + x)) x 100

Solving for x, we get:

x = 10.3g

To know more about Mass percent, here

brainly.com/question/5394922

#SPJ1

When a quinone is oxidized, it forms a hydroquinone.

This is because the oxidation reaction involves the addition of two hydrogen atoms to the quinone, which results in the formation of a hydroquinone molecule. The process of oxidizing a quinone to form a hydroquinone is an important chemical reaction in many biological processes, including cellular respiration and photosynthesis.

what is oxidation reaction ?

Redox is a type of chemical reaction in which the oxidation states of atoms are changed. Redox reactions are characterized by the actual or formal transfer of electrons between chemical species, most often with one species undergoing oxidation while another species undergoes reduction.

To know more about cellular respiration :

https://brainly.com/question/29760658

#SPJ11

when an electron goes from a lower energy level to a higher energy level, a photon of light is emitted with an energy equal to the energy difference between the two orbits.

Here's a step-by-step explanation:

1. The electron initially resides in a lower energy level, also known as its ground state.
2. The electron absorbs energy, which can be in the form of light or a collision with another particle.
3. The absorbed energy causes the electron to become excited and jump to a higher energy level or an excited state.
4. As the electron moves to a higher energy level, it releases a photon of light.
5. The energy of the emitted photon is equal to the energy difference between the two orbits (initial lower energy level and final higher energy level).

In summary, when an electron transitions from a lower to a higher energy level, a photon is emitted, and the energy of that photon corresponds to the energy difference between the two energy levels involved in the transition.

To know more about photon of light:

https://brainly.com/question/23718905

#SPJ11

Cash would be classified as is being most liquid asset.

Generally cash is considered the most liquid asset because it can be easily and quickly converted into any other asset. Cash is readily accepted as a means of payment for goods and services, and it can be easily transferred between parties.

Other assets, such as stocks, bonds, and real estate, may take time and effort to convert into cash, which makes them less liquid.

However, within the context of financial markets, some securities or financial instruments such as government bonds, ETFs, or high-volume stocks can be considered highly liquid due to their ability to be quickly bought or sold without causing significant price movements.

To know more about cash here:

https://brainly.com/question/30588084#

#SPJ11

Liquid water in the earth's air is an example of a D. liquid in a gas.

Air enveloping the Earth holds a striking type of solution: liquid water suspended in gas. This phenomenon, known as a gas-liquid solution, or a method by which a non-gas solute is dissolved in a gas solvent, pervades the atmosphere.

Visible neither to the eye nor with aid of a microscope, vaporized droplets immerse themselves within air's interstices and remain invisible to sight. Other illustrative examples of this process include carbon dioxide laced throughout bubbly soda, oxygen permeating red vernal blood.

Find out more on liquid water at https://brainly.com/question/27470361

#SPJ1

Ansiedad que

Explanation:

If the pH of the resulting solution is 2.65, The Ka for the acid is 3.21 x 10⁻⁶.

To calculate the Ka for the acid, we need to use the relationship between Ka, the concentration of the acid in solution, and the pH of the solution:

Ka = [H+][A-]/[HA]

where [H+] is the concentration of hydrogen ions in solution, [A-] is the concentration of the conjugate base of the acid in solution, and [HA] is the concentration of the acid in solution.

Given that the pH of the solution is 2.64, we can calculate the concentration of hydrogen ions in solution:

pH = -log[H+]

2.64 = -log[H+]

[H+] = 2.24 x 10⁻³M

Since the acid is monoprotic, the concentration of the conjugate base [A-] is equal to the concentration of the acid [HA]:

[HA] = 1.56 M

Now we can use the formula for Ka:

Ka = [H+][A-]/[HA]

Ka = (2.24 x 10⁻³)² / 1.56

Ka = 3.21 x 10⁻⁶

learn more about pH here:

https://brainly.com/question/26856926

#SPJ4

The molecularity of a reaction refers to the number of molecules or particles that participate in the rate-determining step of the reaction.

In this case, the reaction involves two nitric oxide molecules reacting with one another in an elementary reaction. Since the rate-determining step involves only two molecules, the molecularity of this reaction is second order or bimolecular.

Therefore, we can write the rate law for this reaction as:

Rate = k[NO]^2

where k is the rate constant and [NO] is the concentration of nitric oxide.

To know more about the molecularity refer here :

https://brainly.com/question/14614762#

#SPJ11

When the plunger of the syringe was pulled upward, the balloon expanded or inflated.

When the plunger of the syringe was pushed, the balloon compressed or deflated.

For Activity B, after being submerged in warm water, the balloon expanded or inflated.

The expansion of the balloon can be explained by the gas laws and the kinetic molecular theory (KMT). The gas laws state that when the temperature of a gas increases, its volume also increases, assuming that pressure remains constant. KMT explains that gas particles have kinetic energy and move randomly and rapidly, colliding with each other and the container they are in.

Learn more about syringes on

https://brainly.com/question/28221550

#SPJ1

To find the mole fraction of NH3 in the solution, we need to first calculate the total mass of the solution:

Total mass = mass of NH3 + mass of water
Total mass = 15.0 g + 250.0 g
Total mass = 265.0 g

Next, we can calculate the volume of the solution using the density:

Density = mass/volume
Volume = mass/density
Volume = 265.0 g/0.974 g/mL
Volume = 271.82 mL

Now, we can use the volume and concentration of NH3 to calculate the amount of moles of NH3 in the solution:

Concentration = mass/volume
Concentration of NH3 = 15.0 g/271.82 mL
Concentration of NH3 = 0.055 mol/mL

To find the mole fraction of NH3 in the solution, we need to divide the moles of NH3 by the total moles of the solution:

Mole fraction of NH3 = moles of NH3 / total moles
Total moles = (mass of NH3/molar mass of NH3) + (mass of water/molar mass of water)
Total moles = (15.0 g/17.03 g/mol) + (250.0 g/18.02 g/mol)
Total moles = 0.881 mol + 13.871 mol
Total moles = 14.752 mol

Mole fraction of NH3 = 0.055 mol/mL / 14.752 mol
Mole fraction of NH3 = 0.003729

Therefore, the mole fraction of NH3 in the solution is 0.003729.

To know more about mole fraction click this link-

brainly.com/question/29808190

#SPJ11

When an ester is hydrolyzed with water and sulfuric acid, the products formed are an alcohol and a carboxylic acid. This reaction is also known as saponification.

During the reaction, the ester bond is broken and the water molecule is split into a hydrogen ion (H+) and a hydroxide ion (OH-). The H+ ion reacts with the ester, causing it to break down into its alcohol and carboxylic acid components. The carboxylic acid is formed by the addition of the hydroxide ion to the carbonyl group of the ester. The alcohol is formed by the addition of the hydrogen ion to the oxygen atom of the ester. The resulting products are a carboxylic acid and an alcohol that are both hydrolyzed from the original ester.

1. Identify the ester you want to hydrolyze. An ester has the general structure RCOOR', where R and R' are alkyl or aryl groups.
2. In the hydrolysis reaction, water (H2O) is used as a reactant along with sulfuric acid (H2SO4) as a catalyst.
3. The ester (RCOOR') reacts with water (H2O) in the presence of sulfuric acid (H2SO4).
4. The hydrolyzed products formed are a carboxylic acid (RCOOH) and an alcohol (R'OH).

To know more about oxygen visit :-

https://brainly.com/question/26073928

#SPJ11

Answer:

pH which stands for potential hydrogen... Which means the negative logarithm of hydrogen ions concentrated in a solution

For every mole of NaN3 that is broken down, one mole of N2(g) is produced. Using the molar mass of NaN3, which is 68.99 g/mol, we can determine how many moles of NaN3 are present given that we have 50.0 g of the substance.

We get 0.724 mol of NaN3 by dividing 50.0 g by 68.99 g/mol. We can determine that 0.724 mol of NaN3 will result in 0.724 mol of N2(g) since 1 mole of NaN3 yields 1 mole of N2(g). We may use the molar mass of N2(g), which is 28.02 g/mol, to determine the mass of N2(g) produced.

0.724 mol is multiplied by 28.02 g/mol to yield 20.3 g of N2(g). Therefore, 20.3 g of N2(g) will be created from 50.0 g of NaN3.

Learn more about  NaN3 at:

https://brainly.com/question/9809035

#SPJ1

The word equation of the above is carbondioxide plus hydrogen gas equals methane gas plus water.

Word equation represents a chemical reaction using the names of the substances involved.

Word equations do not show any chemical symbols or formulae. In a chemical reaction, reactants are the substances that react together, and products are the substances formed.

According to this question, carbondioxide and hydrogen gas reacts to form methane and water vapor as follows:

CO2 (g)+ H2 (g) = CH4 (g) + H20 (g)

Learn more about word equation at: https://brainly.com/question/15423342

#SPJ1

The classification of mixtures is a fundamental concept in chemistry that is used to identify and categorize different types of mixtures based on their physical and chemical properties.

The classification is important for the chemical industry because it allows researchers to understand the behavior of different mixtures and develop strategies for their separation, purification, and processing.

For example, a mixture may be classified as a homogeneous mixture (solution) or a heterogeneous mixture (colloid or suspension) depending on the size of its particles and how they are distributed within the mixture. This classification can inform the design of separation techniques such as filtration, distillation, or chromatography that are used to isolate and purify the individual components of the mixture.

Learn more about the classification of mixtures at

https://brainly.com/question/6358654

#SPJ4

The question is -

How do you think the classification of mixtures contributes to the chemical industry in their research?

Answer:

1. Warm air rises and cold air sinks.

2. Air moves from high to low pressure.

3. Cold air is denser than warm air.

4. Warm air is lighter than cold air and consequently exerts less pressure.

5. Because the Earth rotates on its axis, circulating air is deflected toward the right in the Northern Hemisphere and toward the left in the Southern Hemisphere. This deflection is called the Coriolis effect.

The statement "An element's molar mass is equivalent to the atomic number of the element" is not accurate.

An element's molar mass is the mass of one mole of that element, expressed in grams per mole (g/mol). It is approximately equal to the element's atomic mass, which is the mass of a single atom of that element, expressed in atomic mass units (amu). The atomic mass is roughly the sum of the protons and neutrons in the nucleus of an atom.

On the other hand, the atomic number of an element is the number of protons in the nucleus of an atom, which defines the element and determines its position in the periodic table. The atomic number does not represent the molar mass of an element.

To know more about molar mass:

https://brainly.com/question/30640134

#SPJ11

Delta E represents the energy difference between reactants and products in a chemical reaction.

The contrast between the possible energy of the items and the likely energy of the reactants is known as the adjustment of expected energy or ΔE. In a synthetic response, this energy contrast addresses how much energy that is either delivered or consumed during the response.

Assuming the potential energy of the items is lower than that of the reactants, then the response discharges energy as intensity, light, or sound. This is known as an exothermic response. On the other hand, assuming the expected energy of the items is higher than that of the reactants, then, at that point, the response assimilates energy from its environmental elements. This is known as an endothermic response.

The size of ΔE relies upon a few variables, including the compound bond qualities and the temperature and tension of the response. Understanding the adjustment of potential energy is significant in fields like science and thermodynamics, as it permits researchers to anticipate and control the energy changes that happen during synthetic responses.

To learn more about an example for potential energy, refer:

https://brainly.com/question/15371310

#SPJ4

The complete question is:

In a reaction, the potential energy of the reactants is 40 kJ/mol, the potential energy of the products is 10 kJ/mol and the potential energy of the activated complex is 55 kJ/mol. What is the activation energy for the reverse reaction?(answer: 45 kJ/mol)

The pH of a 0.020 M HClO4 solution is C) 1.70.

The pH of a 0.020 M HClO4 solution can be calculated using the formula:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution. Since HClO4 is a strong acid, it dissociates completely in water to form H+ and ClO4- ions.

HClO4 → H+ + ClO4-

Therefore, the concentration of H+ ions in a 0.020 M HClO4 solution is also 0.020 M. Substituting this value in the pH formula:

pH = -log(0.020) = 1.70
The pH of a substance or solution is referred to the degree of acidity or alkalinity of that substance. It is measured on a scale of 0 -14.

pH <7 are termed acidic

pH >7 are alkaline

pH =7 are termed neutral

For more information on pH of HCLO4 solution refer https://brainly.com/question/1599662

#SPJ11

Option c is correct. Transition metals typically have low melting points. A collection of elements known as transition metals, or the d-block, are found in the middle of the periodic table.

Because of their strong metallic bonding and partially full d-orbitals, transition metals are noted for having high melting and boiling temperatures. Due to the splitting of the d-orbitals into two energy levels, the molecule acquires its distinctive hue by absorption of light.

Their other distinguishing characteristics, including as their capacity to exist in various oxidation states and their capacity to form complex ions, are similarly influenced by these partially filled d-orbitals.

The unpaired electrons in the d-orbitals of transition metal complexes frequently give rise to magnetic characteristics. Due to the d-orbital electrons' ability to absorb light in the visible spectrum, they frequently have colored compounds as well.

Learn more about Transition metals

https://brainly.com/question/29828769

#SPJ4

Complete question

Which one of the following is not true about transition metals?

a. they frequently have more than one common oxidation state.

b. their compounds frequently exhibit magnetic properties.

c. they typically have low melting points.

d. their compounds are frequently colored.

e. they are found in the d-block of the periodic table.

A covalent bond is required in a compound that is either cis or trans. In cis and trans compounds, the atoms involved are linked by a single covalent bond, but the arrangement of the atoms in space is either cis (same side) or trans (opposite side).

An electron exchange that results in the formation of electron pairs between atoms is known as a covalent bond. Bonding pairs or sharing pairs are the names given to these electron pairs. Covalent bonding is the stable equilibrium of the attractive and repulsive forces between atoms when they share electrons. Each atom in numerous molecules can reach the equivalent of a full valence shell thanks to the sharing of electrons, which results in a stable electronic state. Covalent bonds are substantially more frequent than ionic bonds in organic chemistry.

Cis-trans isomerism is a word used in chemistry that refers to the spatial arrangement of atoms within molecules. It is also known as geometric isomerism or configurational isomerism. The Latin prefixes "cis" and "trans" mean, respectively, "this side of" and "the other side of."Trans conveys that the functional groups (substituents) are on the opposite (transverse) sides of some plane, whereas cis implies that they are on the same side of some plane in the context of chemistry. Cis-trans isomers are examples of stereoisomers, which are pairs of molecules with the same formula but distinct functional groups oriented in three dimensions.

To know more about stereoisomers, visit:

https://brainly.com/question/31147524

#SPJ1

The new concentration of the solution can be obtained as  0.0147 M.

Based on the original concentration and the dilution factor, the dilution formula is used to determine the concentration of a solution after dilution. The final volume to beginning volume ratio is known as the dilution factor.

The dilution equation is

C1V1 = C2V2

where C1 is the solution's initial concentration, V1 is its initial volume, C2 is its final concentration, and V2 is the solution's final volume following dilution.

By the use of the dilution formula;

0.1176 * 30 = x * 240

x = 0.0147 M

Learn more about dilution formula:https://brainly.com/question/3078179

#SPJ1