The equipment releases a balloon from a point that is a small distance above the surface of the planet. The atmosphere at the surface of this planet has a density of

Make an appropriate calculation and then predict and explain the direction of any motion of the balloon. Show your working.

The inflated balloon has a mass of 80 g and a volume of 0.3m ^ 3 .

0.35kg / (m ^ 3)

15 M sun star will end its main sequence life earlier. the 15M sun protostar will be more luminous.

To learn more about protostar, refer to

https://brainly.com/question/13560537

#SPJ4

The parallels between hydroelectricity and solar energy are rather striking. Both employ 100% renewable sources to generate power with zero carbon emissions when the necessary machinery is built and installed.

A considerable volume of water is used in hydropower, which runs through pipes into a power station. Gravity forces high-pressure water through pipelines or canals, causing the turbine to revolve and create energy. Wind power works by spinning the turbine blades, which spin the magnet.

Both types of solar panels, solar photovoltaic (PV) and solar thermal, work on the same concept. They take raw solar energy and convert it into useable energy.

Learn more about solar energy  refer

https://brainly.com/question/17711999

#SPJ4

The time taken by the object with the velocity of 30 m/s is 3.061 s.

What is velocity?

Velocity can be defined as the rate of change of the position of the given object with a reference and time which is a vector quantity. It can be calculated using distance and the speed of the given object.

The time taken by an object with the velocity of 30 m/s can be calculated as,

v = u + gt

where v is the final velocity, t is the time, g is the acceleration due to gravity and u is the initial velocity.

30 m/s = 0 + 9.8 x t

t = 3.061 s

Therefore, the time taken by the object with the velocity of 30 m/s is 3.061 s.

To learn more about velocity click on the link https://brainly.com/question/24681896

#SPJ4

The box's launch speed across the floor is 5.2 m/s. The result is obtained by using the law of conservation of energy.

The law of conservation of energy states that "The total energy is neither increased nor decreased in any process. Energy can be transformed from one form to another, and transferred from one object to another, but the total amount remains constant."

E initial = E final

We have a horizontal spring with:

In that case, we know that there is elastic potential energy and force of kinetic friction. The total work done would be:

W = 1/2 k(Δx)² - Ff.Δx

At the final condition, there is only the kinetic energy.

E final = 1/2 mv²

Using the law of conservation of energy, we get the speed:

E initial = E final

W = E final

1/2 k(Δx)² - Ff.Δx = 1/2 mv²

1/2 k(Δx)² - μmg.Δx = 1/2 mv²

1/2 (210)(0.2)² - 0.23(0.3)(9.8)(0.2) = 1/2 (0.3)v²

4.2 - 0.135 = 0.15v²

4.2 - 0.135 = 0.15v²

4.065 = 0.15v²

v² = 27.1

v = √27.1

v = 5.2 m/s

Hence, the box's launch speed is 5.2 m/s.

Learn more about law of conservation of energy here:

https://brainly.com/question/13926870

#SPJ4

The proton's velocity forms an incidence of 139* together with field at a site where it has an amplitude of 0.00635 T.

The ratio below 1 translates reached to the time needed to travel that distance is known as speed. Since speed just has a constituent and no magnitude, it is a proportionality constant.

By multiplying the distance covered by the time needed to get there, speed is computed. To calculate the passing time, multiply the kilometers by the speed. To calculate the distance, multiply the movement by the time. These equations might be abbreviated as s=d/t.

To know more about speed visit:

https://brainly.com/question/28224010

#SPJ4

The forward acceleration of the bicycle will be 1.52 m/s²

Given parameters:

Force  = 125N

Mass combined = 82kg

Acceleration of the bicycle  = ?

From Newton second law of motion suggests that:

Force = mass x acceleration

 Acceleration =  force/mass = 125/82 = 1.52 m/s²

What is acceleration?

In mechanics, acceleration is the rate of change of an object's velocity with respect to time. Acceleration is a vector quantity (as long as it has magnitude and direction). The direction of an object's acceleration is given by the direction of the net force acting on that object. As described in Newton's second law , the magnitude of an object's acceleration is the combined effect of two sources.

The mass of this object is inversely proportional to the mass of the object, depending on the material from which it is made.

Therefore, The forward acceleration of the bicycle will be 1.52 m/s².

To know more about acceleration , check out:

https://brainly.com/question/460763

#SPJ4

when an object is placed in a fluid and then released ,The object will float if the density of object ( Pobject )is less than the density of fluid ( Pfluid ) .Pobject < Pfluid -> object will float .

The object will sink if density of object ( Pobject ) is more than the density of fluid ( Pfluid ) .Pobject > Peluid - object will sink

Here , the object is floating on the surface of liquid of first container . So , the density of object is less than the density of liquid .

object < Pliquid 1

Now , the object is removed and placed in second container with Liquid 2 having density greater . Puquid 1 < Pliquida

so ,Pobject < Pliquids < Pliquidz

In this case , object well float also , but its depth will be less than it was in thefirst container,( Liquid 2 is denser).

Here , in this case, we will observe :The object will float submerged less deeply than in the first containers.

Learn more about density here:

https://brainly.com/question/6329108

#SPJ4

The angle's rate of change when the bottom of the ladder is 6 ft from the wall is 0.37 rad/s.

Let at any moment of time the foot of the ladder is at distance "x" from the wall and if the length of the ladder is L = 10 ft.

so we have

x / L = cos θ

so we have

x = L cos θ

now differentiate the above equation with time

dx / dt = -L sinθ (dθ/dt)

so we have

dθ / dt = -v(s) / L sin θ

dθ / dt = - 1.5 / 10 sin θ

as we know that

cos θ = 0.9

cos θ = cos 57

θ = 57 degrees

dθ / dt = - 1.5 / 10 sin 57

dθ / dt = - 0.37 rad / s

Therefore, the angle's rate of change when the bottom of the ladder is 6 ft from the wall is 0.37 rad/s.

To know more about angle. refer: https://brainly.com/question/15276911

#SPJ4

The temperature of the liquid water is the same as that of the ice by definition of thermal equilibrium.

When two physical systems are linked by a channel permeable to heat, they are said to be in thermal equilibrium if there is no net movement of thermal energy between them. The zeroth law of thermodynamics is observed in thermal equilibrium. Heat is the energy transfer from a high temperature to a low temperature. The system is considered to be in thermal equilibrium when their temperatures are equal, heat no longer flows, and this happens. Additionally, thermal equilibrium indicates that there is no matter entering or leaving the system. When the engine temperature eventually reaches the same level as the air temperature, thermal equilibrium has taken place. After being on the table for a short while, a cup of hot tea cools to the same temperature as its surroundings.

Learn more about thermal equilibrium here:

https://brainly.com/question/14556352

#SPJ4

There is a direct relationship between the  speed of the rotation of the planet and the amount and complexity of the storm. A planet with a high rotation rate would have more frequent and more complex storms on its surface.

To learn more about rational speed, refer;

https://brainly.com/question/15112011

#SPJ4

A diver bounces straight up from a diving board, avoiding the diving board on the way down, and falls feet first into a pool. She starts with a velocity of 5 m/s and her takeoff point is 1.3 m above the pool. The highest height she reaches is 1.25 m.

Given that, initial velocity of the diver is 5 m/s

Final velocity will be zero at the highest point

Acceleration due to gravity is taken as 10 m/s²

Using one of the equations of motion, v²- u² = 2as

where, v is the final velocity = 0

u is the initial velocity

a is the acceleration

s is the distance (here it is the height reached)

v²- u² = 2as

Making 's' as the subject, we have

s = v²- u²/ (2a)

s = 0 - (25)/(2*-10)

s = 1.25 m

Thus, the height height reached by her is 1.25 m.

To know more about equations of motion:

https://brainly.com/question/13599043

#SPJ4

(a) The total volume of the sample in the given water is [tex]$6.43 \times 10^{-4} \mathrm{~m}^3$[/tex]

(b) The density of the given sample is [tex]$\mathbf{2 , 7 7 7 . 6} \mathrm{kg} / \mathrm{m}^3$[/tex].

The given parameters;

weight of the object in air = 17.5 N

weight of the object in water = 11.2 N

The mass of the object is calculated as;

[tex]m=\frac{W}{g}=\frac{17.5}{9.8}=1.786 \mathrm{~kg}$$[/tex]

The upthrust on the object when immersed in water is calculated as follows;

[tex]$$\begin{aligned}& F_n=17.5 \mathrm{~N}-11.2 \mathrm{~N} \\& F_n=6.3 \mathrm{~N}\end{aligned}$$[/tex]

The volume of the object is calculated as follows;

[tex]$$\begin{aligned}& F_n=\rho V g \\& V=\frac{F_n}{\rho g} \\& V=\frac{6.3}{9.8 \times 1000} \\& V=6.43 \times 10^{-4} \mathrm{~m}^3\end{aligned}$$[/tex]

The  density of the sample is calculated as follows;

[tex]$$\begin{aligned}& \rho=\frac{\text { nass }}{\text { volume }} \\& \rho=\frac{1.786}{6.43 \times 10^{-4}} \\& \rho=2,777.6 \mathrm{~kg} / \mathrm{m}^3\end{aligned}$$[/tex]

Complete question: an ore sample weighs 17.50 N in air whan the sample is suspended by a light cord and totally immersed in water the tension in the cord is 11.20 N find the total volume and density of the sample?

To learn more about density  visit:https://brainly.com/question/15164682

#SPJ4

The possible distance between Chadwick and Barkersville is 120 miles.

The Triangle Inequality Theorem states that the sum of any two lengths of triangle sides is larger than the length of the third side. Here, the length of one side is 70 miles and another side is 90 miles.

Let the third side be x. So, to find the third side, follow the below two steps:

Therefore, the sum of the two sides is 70 + 90 = 160 miles.

And the difference is 90-70=20 miles.

So the value of x should lie in the range 160>x>20.

Here, option 3 lies in this range. So, the answer is 120 miles.

To know more about Triangle Inequality Theorem:

https://brainly.com/question/1163433

#SPJ4

The distance from the center of the Milky Way Galaxy from farthest to closest as:

A globular cluster in the outskirts of the halo, A cloud of gas and dust in the outskirts of the disk, our solar system, and The edge of the central bulge.

The Milky Way can be described as the galaxy that involves our Solar System, and the name describes the galaxy's appearance from Earth. The Milky Way appears from the earth as a band because of its disk-shaped structure.

The Milky Way consists of between 100 and 400 billion stars and at least that many planets. The neighboring Andromeda Galaxy consists of an estimated one trillion stars. The Milky Way consists of ten billion white dwarfs, a billion neutron stars, and 100 million stellar black holes. To fill the space between the stars is a disk of gas and dust known as the interstellar medium.

Learn more about Milky Way, here:

https://brainly.com/question/2806083

#SPJ1

The distance of inside from the center of the sphere is R/2 and distance of outside from the center of the sphere is  √2 R when the gravitational acceleration is R/2.

What is gravitational acceleration?

Gravitational acceleration within a vacuum is the acceleration of an object within the vacuum which is used to indicate the intensity of the gravitational field.

Inside the sphere with gravitational acceleration,

ag = GrMe / R^3

R / 2 = r

Outside the sphere,

ag / 2 = GMe / r^2

r = √2 R.

Therefore, the distance of inside from the center of the sphere is R/2 and distance of outside from the center of the sphere is  √2 R when the gravitational acceleration is R/2.

To know more about the gravitational acceleration click on the given link https://brainly.com/question/14374981  

#SPJ4

The object can move as farther as 0.2m.

Using the Sine Equation,

= x(t) = Asin(ωt)

=Here, t=0, x=0,

Given that,

Distance = x(t) = 0.60 = A sin(ωt)

Velocity = v(t) = 2.20 m/s = Aωcos(ωt)

Acceleration = a(t) = 8.40 m/s² = -Aω²sin(ωt)

Using wave equation,

= x(t) / a(t) = A sin(ωt) / -Aω²sin(ωt)

= ω² = 14 rad²/s²

= ω = 3.74 rad/s

The amplitude of the motion =

=  x(t) / v(t) = A sin(ωt) / Aωcos(ωt)

= A = 0.2 m

To know more about Wave Amplitude:

https://brainly.com/question/7562439

#SPJ4

The scientific method is not limited.

The scientific method is defined as an empirical method for gaining knowledge of the development of science.  It includes the careful observation, applying rigorous procedures about what we have observed, given that cognitive assumptions can distort how one interprets the observation. It involves formulating hypotheses, via induction, based on such observations; the testability of hypotheses, experimental and the measurement-based statistical testing of deductions drawn from the hypotheses; and refinement (or elimination) of the hypotheses based on the experimental findings.

Hence, the scientific method is not limited it goes on and on based upon the change in the experimental observations, assumptions predictions and hypothesis.

To know more about scientific method here:

https://brainly.com/question/18876757

#SPJ4      

a particle moves along the x axis. it is initially at the position 0.340 m.the position of the particle after this time is 2.52 metres towards negative x direction.

Displacement (symbolized d or s ), also called length or distance, is a one-dimensional quantity representing the separation between two defined points. The standard unit of displacement in the International System of Units ( SI ) is the meter

Displacement is the change in position by a body. It's defined as shortest distance between initial and final position of the body. It's a vector quantity. Hence, it has both magnitude and direction. To understand the magnitude and direction of displacement, consider a body moving from position A to position B.

s=ut+1/2at².

on solving the eqn we get displacement as -2.52 metres

which means the body is 2.52 metre towards negative x.

learn more about displacement:https://brainly.com/question/321442

#SPJ4

Work done is given by

dw=Pdv, w=∫₁²(NkT/V-Nb)dv

The amount of work is 5708.00923 J.

border that is erroneous Frequently, the edges are jagged, serrated, or blurry in outline. It's possible for the pigment to penetrate the nearby skin. unbalanced color: There could be various tones of tan, brown, and black. There may also be white, black, red, pink, and blue patches.

Using traps or bait with in spring or fall will increase your chances of successfully eliminating moles from your yard. The primary runway, or active runway, should be used for both goods. Usually, these are the vertical tunnels in your grass or the ones that round the outside of your property.

To know  more about Moles visit :

https://brainly.com/question/28239680

#SPJ4

Fusion of helium nuclei to form carbon and oxygen in the core of a star after the start of helium nuclear reactions in its core compared.

The positions of the stars in relation to one another are largely constant. Orion and Taurus are constantly converging. Draco is always near Ursa Minor. When we look at the sky, the stars are a never-ending backdrop painting that barely move in relation to one another.

There are some minute movements as we orbit the sun throughout the year. Stars closer to us move more left and right than stars farther away. It makes sense, even if it only has a small impact. If you keep your eyes fixed out into the distance as you walk down the street, you'll notice that objects farther away move less in relation to you than ones closer to you.

To know more about  stars visit : brainly.com/question/21521087

#SPJ4

The position of an object moving in a straight line is given by x(t), where t is the time. Find the instantaneous velocity when t = t0.

What is velocity?
Velocity is the direction at which an object is moving and serves as a measure of the rate at which its position is changing as seen from a specific point of view and as measured by a specific unit of time (for example, 60 km/h northbound). In kinematics, the area of classical mechanics which deals with the motion of bodies, velocity is a fundamental idea. A physical vector quantity called velocity must have both a magnitude and a direction in order to be defined. Speed is the scalar absolute value (magnitude) of velocity; it is a cohesive derived unit whose quantity is assessed in metres per second (m/s or m/s1) in the SI (metric system). In contrast to "5 metres per second east," which is a vector, "5 metres per second," for instance, is a scalar.

To learn more about velocity
https://brainly.com/question/24445340
#SPJ4

The force exerted by the 25 kg gymnast after a spectacular somersault is 2940 N.

Given,

Mass of the gymnast, m = 25 kg

The deceleration experienced by the gymnast, a = 9×g (acceleration due to gravity)

Now, according to Newtons second law of motion, the net force on the gymnast will be:

[tex]F_{net}[/tex] = F - W = ma

Where F is the force on the gymnast, W is the weight and a is the acceleration experienced.

So, we can also rewrite the above equation as

F = ma +W

= ma + mg

= m(a + g)

= 30 kg( 9×9.8 + 9.8)

= 30 (88.2+9.8)

= 30×98

=2940 N

Hence, the force exerted by the gymnast is 2940 N.

To know more about Newton's second law of motion here:

https://brainly.com/question/10902242

#SPJ4      

If the second piece is removed from the first and placed in the water, then the water level remains unchanged.

The water level is the water level reached in the container.

Initially, the weight of the pieces of wood was balanced by the buoyancy provided by the water, which depended on the volume of the first piece of wood that was inside the water (which was equal to the volume of water displaced).

Now, when the other piece was placed in the water, then again the weight of both blocks individually (which does not change) would be balanced by the lift of the total volume (coming from the contribution from both blocks), which would be the same. as before.

The water level would thus remain unchanged.

To know more about water level,

https://brainly.com/question/13098762

#SPJ4

Objects, farthest to the closest will be Pluto, Saturn, Jupiter, Mars, Earth, and Mercury.

Our solar system consists of our megastar, the solar, and the whole thing sure to it by gravity – the planets Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune; dwarf planets such as Pluto; dozens of moons; and thousands and thousands of asteroids, comets, and meteoroids. past our personal solar system, we have discovered thousands of planetary systems orbiting other stars inside the Milky manner.

The planets orbit the solar, roughly within the same plane. The solar system moves through the galaxy with approximately a 60° perspective between the galactic plane and the planetary orbital aircraft. The solar seems to transport up-and-down and in and out with respect to the rest of the galaxy because it revolves across the Milky Way.

Learn more about gravity here; https://brainly.com/question/940770

#SPJ4

The pH of the solution is 6.05

[tex]K_{b} of HONH_{2} =1.1*10^{-8} \\pK_{b} of HONH_{2} =7.95\\\\pOH=pK_{b}+log\frac{HONH_{3}Br }{HONH_{2\\}} \\[/tex]

[tex]pOH=pK_{b} =7.95\\\\pH=14-7.95\\\\pH=6.05[/tex]

Therefore, the pH of the solution is 6.05

To learn more about pH, refer to

https://brainly.com/question/172153

#SPJ4

The elements of design thinking can be broken down into five key components: understanding the problem, generating ideas, prototyping, testing and refining.

Understanding the problem is the first step. Design thinking starts by understanding the problem that needs to be solved, and then looking at it from a variety of perspectives. This helps to identify the root cause of the problem and uncover potential solutions.

Generating ideas is the second step. Design thinking encourages creative thinking and encourages the exploration of a wide range of potential solutions. It is important to look at the problem from different angles, and to think outside the box. This can be done with brainstorming sessions, mind-mapping, and other creative problem-solving techniques. Prototyping is the third step. Once potential solutions have been identified, a prototype should be created.

Learn more about Prototype at : https://brainly.com/question/28187820

#SPJ4

When space heating equipment uses electric resistance heating elements, the protection for the resistance elements shall not exceed 60 Amperes.
Understanding Heating Element
Heating element Is a device that is used as a source of heat, which is obtained by converting electrical energy into heat, also called "electric heating elements".
Electric heating elements are widely used in everyday life, both in households, or in industrial equipment and machines.
The shape and type also vary according to function, place of installation and type of media to be heated.

The basic shape of the electric heating element
The heat generated by this electric heating element comes from a wire or electrical resistance tape.
This wire or ribbon is generally made of nickel (NiCr) which is wound into a coil.
This nickel coil winding is the most basic type of electric heating element.
Advanced form Electric heating element
There are 2 types of advanced forms of electric heating elements, namely:
1. The first type is a heating element made of nickel coils covered with a sheath only with an electrical insulating material that is resistant to high temperatures and has good heat transfer properties.
These materials can be ceramic, alumina, teflon, silica, glass and others.
2. The second type is the coil or nik coil
Lin which after being given a sleeve or coated by an electrical insulating material is then covered again by a sleeve (sheath) made of metal.
In this second type, it is the outermost heater wrap that is in direct contact with the heated media.

Learn more about heating elements at https://brainly.com/question/21947157.
#SPJ4

If the cat has a mass of 2.9 kg, 1.8m far to the right of sawhorse B can it walk before the plank.

plank will tip when the weight of the cat about B is greater than the torque by the weight of the plank.

mg[tex]d_{2}[/tex] = mg[tex]d_{1}[/tex]

Rearrange for [tex]d_{2}\\[/tex].

[tex]d_{2}[/tex] = [tex]\frac{Mgd_{1}}{mg}[/tex]

[tex]d_{2}[/tex] = [tex]\frac{Md_{1}}{m}[/tex]

   = [tex]\frac{(6.00kg)(0.85)}{2.9kg}[/tex] = [tex]1.758m[/tex]

[tex]d_{2}[/tex] ≈ 1.8m

Mass is the amount of matter in a bodily frame. it's also a measure of the body's inertia, the resistance to acceleration (alternate of speed) while a net force is carried out. An item's mass additionally determines the electricity of its gravitational enchantment to different bodies.

In physics, mass is not similar to weight, even though mass is regularly decided by way of measuring the object's weight with the usage of a spring scale, instead of a stability scale evaluating it immediately with regarded masses.

An object on the Moon could weigh much less than it does in the world because of the decreased gravity, but it would nevertheless have the same mass. that is because weight is a force, at the same time as mass is the belongings that (alongside gravity) determine the electricity of this pressure.

The worldwide gadget of units (SI) unit of mass is the kilogram (kg). The kilogram is 1000 grams (g) and turned into first described in 1795 because of the mass of 1 cubic decimetre of water on the melting factor of ice. however, because the precise size of a cubic decimetre of water at the required temperature and strain changed into tough, in 1889 the kilogram was redefined because the mass of a metallic object

To learn more about mass visit here:

brainly.com/question/19694949

#SPJ4

Complete Question:

A cat walks along a plank with a mass of M= 6.00 kg. The plank is supported by two sawhorses. The center of mass of the plank is a distance d1= 0.850 m to the left of sawhorse B. When the cat is a distance d2= 1.11 m to the right of sawhorse B, the plank just begins to tip.

If the cat has a mass of 2.9 kg, how far to the right of sawhorse B can it walk before the plank begins to tip?

Her acceleration when her speed is 30.0m/s is 10m/sec².

Calculation:-

mg = bv

I am also not quite sure if I should use 9.8 m/s2 or if it is ok to round and use 10m/s2 for physics.

Given: m = 80 kg, vt = 50 m/s.

(a) What is the acceleration of the skydiver, when her speed is 30 m/s?

(b) What is the drag force on the diver when her speed is 50 m/s?

(c) What is the drag force on the diver when her speed is 30 m/s?

(a) Using we can find DρA.  DρA = 2mg/vt2 = 0.6272 kg/m.

Therefore a = dv/dt = 9.8 m/s2 - (0.6272/(160 m))v2.

When v = 30 m/s, a = 6.272 m/s2.

(b).When v = vt = 50 m/s, the drag force is equal in magnitude to mg = 784 N.

(c.) When v = 30 m/s, the total force is equal in magnitude to

ma = (80 kg)(6.272 m/s2) = 502 N.  The magnitude of the drag force is mg - ma = 282 N.

After a maximum velocity, the acceleration stops due to the high drag force. and in most of the problems, g is taken to be 10m/sec².

The drag equation states that the drag force D is equal to the drag coefficient Cd density r half velocity V squared reference area A. For a given air condition object shape and tilt, we need to determine the value of Cd to determine the drag force.

Learn more about Acceleration here:-https://brainly.com/question/460763

#SPJ4

This statement about distance is proved.

What is distace?

It is length of space between two points.

Okay so the first three parts of this problem is more mathematics and physics. Um So part A were given Ds equals R. D. Data. We're required to find S. So we just integrate both sides then as equals integration of R. D. Data. Our data is given. So the upon integration over our data is simply R zero santa plus one half beta zeta squared for part B. We'll fix that S equals V. T. Um And using as equals dis above equation we combine these two. We see this is Justin equation for data so we can suffer it to get to roots once positive. The other negative of course which is a positive one because it has the correct physical meaning a negative data would mean that uh the direction of rotation is in the opposite direction.

standard uh standard unit is zero point 247 times turn to the negative six nature radio. And we're also given the time 74 minutes or equivalently 4440 seconds. So plugging all this. So plugging data mm hmm and R zero into the expression of um data. So we plug in better Data. V is also given. So everything is known. We can safely find data to be um 1.337 Times 10-5 brilliant. Or in terms of revolutions is 2.13 times 10 to 4 revolution. Okay. In the last part of the problem, we simply well plugging again the numbers for beta, tr zero V to the previous expressions for omega and alpha. You can enjoy the using mathematical or even by hand or maybe he looks like this shape while um the alpha t looks more like this.

To know more about distance click

https://brainly.com/question/26046491

#SPJ4