The following data were obtained when a sample of barium chloride hydrate was analyzed as described in the Procedure section. Mass of empty test tube Mass of test tube and hydrate (before heating) Mass of test tube and anhydrous salt (after heating) 18.42 g 20.75 g 20.41 g Calculate (a) the original mass of the hydrate, (b) the mass of water lost upon heating, and (c) the experimental percent water in the hydrate.

Covalent bonds are formed when two atoms that are both nonmetals form a bond. A positively charged nucleus is surrounded by negatively charged electrons in each atom. Because the nuclei are both positively charged, they repel one another. Because they are both negatively charged, electrons repel each other.

A chemical bond can be compared to an attractive force between atoms. As a result, atoms and molecules have chemical potential energy.

Attraction is a force that exists between two or more dissimilar or opposing charges. Two charges with dissimilar properties attract each other. Repulsion is a force that exists between two or more charges that are similar or like. Two charges with similar characteristics repel each other.

Thus, When atoms are bonded to other atoms, their potential energy is lower than when they are separated.

To learn more about the potential energy, follow the link;

https://brainly.com/question/24284560

#SPJ1

Mg and S are atoms, H₂ and SO₃ are molecules and HBr is a molecule.

The smallest component of ordinary stuff that makes up a chemical element is an atom. On the periodic table, they are listed.

An electrically neutral collection of two or more atoms bonded together by chemical bonds is referred to as a molecule.

Both sulfur and magnesium are atoms, and we can both find them on the periodic table.

H₂, a molecule made up of two hydrogen atoms. A molecule known as SO₃ has one sulfur atom and three oxygen atoms.

Your question is incomplete but most probably your full question was

Classify the following statements as describing atoms, molecules, or both. drag the appropriate items to their respective bins. a. Mg S b. H2 SO3 c. HBr

learn more about molecules and atom at https://brainly.com/question/7013021

#SPJ4

The correct answers to the statement "The purpose of CH202 is to…" are:

CH202 is designed to help students reinforce the content of CH201 by providing hands-on experience with laboratory experiments and equipment. Through these activities, students learn more about the quantitative aspects of chemistry, such as calculations involving significant figures and the techniques for using equipment for quantitative analysis.

Learn more about CH202:

https://brainly.com/question/13351905

#SPJ4

The new temperature of the gas is  400 K.

We have to remind ourselves of the Charles law. The Charles law states that, the volume of a given mass of gas is directly proportional to the temperature as long as the pressure have been held as constnat.

In the case of the problem that we have here, we can be able to write that;

Initial temperature (T1 ) = 100 K

Initial volume V1 = 5 L

Final temperature T2= ?

Final volume  V2 = 20 L

V1/T1 = V2/T2

V1T2 = V2T1

T2 = V2T1/V1

T2 =  20 L * 100 K/5 L

T2 = 400 K

Learn more about gas laws :https://brainly.com/question/12669509

#SPJ1

Explanation:

To find ΔrH for the combustion of naphthalene, we can use the equation: ΔrH = qp / n

where qp is the heat absorbed by the bomb calorimeter and n is the number of moles of naphthalene.

First, we need to find qp. We can use the formula: qp = mcΔT

where m is the mass of naphthalene, c is the specific heat capacity of the calorimeter, and ΔT is the change in temperature.

Given that m = 1.312 g, c = 4.184 J/g°C, and ΔT = 30.188 - 24.710 = 5.478 °C

qp = (1.312 g)(4.184 J/g°C)(5.478 °C) = 27.948 J

Next, we need to convert the mass of naphthalene to moles. We can use the molar mass of naphthalene, which is 128.17 g/mol

n = m / M = 1.312 g / 128.17 g/mol = 0.0103 mol

Finally, we can use the equation ΔrH = qp / n to find ΔrH:

ΔrH = qp / n = 27.948 J / 0.0103 mol = 2713.8 J/mol

Therefore, the ΔrH for the combustion of naphthalene at 298 K is 2713.8 J/mol.

In addition to the 4Ps of marketing, it is also important to consider the sustainability, ethics and social responsibility in the twenty-first century marketplace when launching a campaign. It is important to consider the impact the product, service or campaign has on the environment and the society, how it is produced and how it is marketed to the public. Additionally, understanding the target audience, their demographics and what they value is important to create an effective marketing campaign.

The terms that best describe the isomeric relationship between staggered and eclipsed ethane are B: "conformational, achiral, diastereomers."

An isomeric relationship refers to the relationship between two or more chemical compounds having the same molecular formula but differing in the arrangement of their atoms. Isomers can be classified into different types such as structural isomers, stereoisomers, and conformational isomers based on the differences in their molecular structure.

In the context of this question the isomeric relationship between staggered and eclipsed ethane is described as "conformational, achiral, diastereomers.

You can learn more about  isomeric relationship at

https://brainly.com/question/29033187

#SPJ4

Once all the components are added, you need to mix them well and adjust the final volume to 1 L with water. You can check the pH of the solution using a pH meter or pH paper to make sure it is 7.

To prepare 1 L of PBS, you will need to add the following components to 800 mL of water:

Sodium Chloride (NaCl): 0.85% (w/v) of 1 L of PBS is 8.5 g, so you need to add 8.5 g of NaCl to the 800 mL of water.

Sodium Phosphate: 5 mM of 1 L of PBS is 5 × 10⁻³ moles, so you need to add (5 × 10⁻³ moles / 100 mM) × 10 mL of the 100 mM sodium phosphate stock solution to the 800 mL of water.

Sodium EDTA: 1 M of 1 L of PBS is 1 mole, so you need to add (1 mole / 100 mM) × 10 mL of the 100 mM sodium EDTA stock solution to the 800 mL of water.

To now more about sodium EDTA here

https://brainly.com/question/29844775

#SPJ4

The final volume of the of the dilute solution is 0.13 L. This is calculated by using dilution equation.

Dilution is defined as the process of decreasing the concentration of a solute in a solution by mixing with more solvent like adding more water to the solution. Dilution means to add more solvent without the addition of more solute. Dilution decreases the concentration of the solute in the solution. According to the dilution equation,

    M1V1  = M2V2  

Here, M1 is the initial concentration, V1 is the initial volume, M2 is the concentration after mixing or diluting and V2 is the total final volume of the solution.

M1 = 3.13 M  

V1  = 41.6 mL

M2  = 1.00 M  

V2 = M1V1 / M2

V2 = 3.13 x 41.6 / 1.00

V2 = 130.21 mL

    = 0.13 L

To learn more about Dilution Equation please visit:

https://brainly.com/question/11493179

#SPJ4

For instance, for number two, the mass of lead oxide is equal to the moller mass of 2-3 g times 2.360 moles. This is 5.26 8 g in weight.

Elevated nitrogen dioxide concentrations can harm the human respiratory system and make someone more susceptible to and more severely affected by asthma attacks and respiratory infections. Chronic lung damage may result from prolonged exposure to high nitrogen dioxide levels.

The two half-filled outer orbitals of oxygen lead to the assumption of a negative oxidation state in all of its molecules. The oxide ion O2 is produced when these orbitals are filled through electron transfer.

To know more about Oxide visit:

https://brainly.com/question/9496279

#SPJ1

Average Atomic Mass = (Mass of Isotope 1 x Fractional Abundance of Isotope 1) + (Mass of Isotope 2 x Fractional Abundance of Isotope 2) + ……

To identify the most abundant isotopic form of an element, compare the provided isotopes to the periodic table’s weighted average. The three hydrogen isotopes (seen above) are, for example, H-1, H-2, and H-3. Hydrogen’s atomic mass, or weighted average, is around 1.008 amu ( look again at the periodic table).

Bromine (Br) has an atomic mass of 79.90. The primary isotopes are 79 and 81, which add up to the 79.90amu value. The 79 has 44 neutrons, while the 81 has 46. While it has no effect on the normal atomic mass, scientists have created bromine isotopes with masses ranging from 68 to 97.

To learn more about isotope to refer:

https://brainly.com/question/11680817

#SPJ1

-269.15 degree Celsius is the temperature at which cadmium becomes superconducting.

When chilled below a threshold temperature, certain materials have the ability to conduct direct current (DC) electricity without losing energy (referred to as Tc). When these materials reach the superconducting state, they also release magnetic fields.

One of nature's most fascinating quantum phenomena is superconductivity. It was found in mercury that had been cooled to liquid helium temperature, or about -452 °F, or only a few degrees above absolute zero, more over 100 years ago.

Early on, scientists were able to describe what happened in superconductivity, but for nearly 50 years, the why and how of superconductivity remained a mystery.

Learn more about cadmium:

https://brainly.com/question/29977763

#SPJ4

No. If a reaction is favorable and spontaneous in foreword direction, it is not spontaneous in reverse reaction unless the reaction is at equilibrium.

A forward direction will make it non-spontaneous for the reverse direction.  It is non-spontaneous unless the reaction is at equilibrium. The forward reaction is spontaneous due to the products of the forward reaction are favored at equilibrium. Reactions are favorable for spontaneous when they result in a decrease in enthalpy and an increase in entropy of the system. A spontaneous reaction is defined as a reaction that favors the formation of products at the conditions under which the reaction is occurring. A nonspontaneous reaction is defined as a reaction that does not favor the formation of products at the given set of conditions.

To learn more about Equilibrium please visit:

https://brainly.com/question/517289

#SPJ4

Microscopic particles make up all liquids, gases, and solids, but their behavior varies between the three phases:

The term "microscopic scale" comes from the Ancient Greek "mikrós," which means "small," and "skopé," which means "to look" examine, inspect') refers to the smaller scale of things and events that can't be seen with the bare eye and require a lens or microscope to see clearly.

A chemical reaction occurs when reactant atoms, ions, or molecules are transformed into product atoms, ions, or molecules at the molecular level. On the microscopic scale, the temperature is simply defined as the average energy of microscopic motions of a single particle in the system per degree of freedom. This necessitates the breaking of some bonds, the formation of additional bonds, and the relocation of some nuclei.

To know more about the Temperature, visit:

https://brainly.com/question/23411503

#SPJ1

The distance can be calculated using the formula: d = v * t, where d is the distance, v is the speed of sound (330 m/s), and t is the time elapsed (5 seconds).

So, the distance is: 330 m/s * 5 s = 1650 meters.

The zwitterion form of a tripeptide would show the zwitterion forms of its three individual amino acids.

The needed diagram is attached below:

Peptides and proteins are made up of amino acids. There are 20 common amino acids that may be used to make peptides. Each amino acid has a core carbon atom known as the alpha carbon, which is linked to an amino group (-NH2), a carboxyl group (-COOH), and a distinct side chain R group.

A tripeptide is a peptide that is made up of three amino acids. When an amino acid is in an aqueous solution with a pH equal to its pI, it takes on the zwitterion form (isoelectric point). The amino acid is neutral and exists as a zwitterion at its pI because it contains equal quantities of positive and negative charges.

For more questions on zwitterion form

https://brainly.com/question/2329477

#SPJ4

The solution equals 0.0065009910760895. We'll presume you're changing from moles of carbon tetrachloride to grams.

There are 6.0231023 molecules in 1 mole of a given chemical. As a result, 2.25 1024 molecules make up 3.74 mol of carbon tetrachloride.

Calculate the atomic weight of each element in the compound by multiplying its number of atoms by its atomic weight (found in the periodic table). 3. Compute the total and add units of grams/mole to the number.

To know more about carbon visit :-

https://brainly.com/question/22530423

#SPJ1

The answer is  A) 2.3 × 104 lb CO.

Per mile ridden, the motorcycle emits carbon monoxide(CO)e, we must first change the distance from miles to kilometers. Since 1 kilometer equals 0.621371 miles, 15,000 miles equal 24140.25 km.

The entire amount of CO created can now be calculated by multiplying the emission rate by the distance traveled.

2.28 104 g CO is equal to 9.5 g CO/km * 24140.25 km.

The options in the question are in pounds, thus we must first convert this number to pounds.

If 1 lb is equal to 453.59 g, then 5.03 g CO per 453.59 g/lb equals 2.28 g 104 g CO.

We can state that the result will be 2.3 x 104 pounds of CO by rounding up.

Learn more about CO:

https://brainly.com/question/30225838

#SPJ4

The volume (in mL) of the gas when the barometer reads 740 mmHg is 243.24 mL

The following data were obtained from the question given above:

The new volume of the gas can be obtained by using the Boyle's law equation as shown below:

P₁V₁ = P₂V₂

720 × 250 = 740 × V₂

180000 = 740 × V₂

Divide both sides by 740

V₂ = 180000 / 740

V₂ = 243.24 mL

Thus, we can conclude from the above calculation that the volume is 243.24 mL

Learn more about volume:

https://brainly.com/question/9614052

#SPJ1

The collection of species in an ecosystem that are at the same level in the food chain is referred to as a trophic level. A food chain has five basic trophic levels, each of which has a different nutritional connection to the main energy source.

Based on their eating habits, organisms in a chain are divided into various stages or trophic levels.

The producers, or green plants, are found on the first and lowest level. The organisms in this trophic level consume sunlight and water and nutrients as a means of food and nutrition.

The second-level creatures, or herbivores, or plant eaters, eat the plants or their products.

Primary carnivores, or meat eaters, consume herbivores in the third level.

Secondary carnivores consume primary carnivores at the fourth level. Since many creatures graze on many trophic levels, these classifications are rarely rigidly enforced.

For instance, certain omnivores—which are carnivores but sometimes occasionally ingest plant material or animal carcasses—are also herbivores.

A further trophic level called the decomposers or transformers is made up of creatures like bacteria and fungi that convert waste products and dead organisms into nutrients that the producers may use.

Learn more about trophic levels at:

brainly.com/question/13267084

Answer:

the reactants and products in a reaction

Explanation:

Brainliest pls

White soft paraffin is used as a barrier cream, forming an oil layer on the skin's surface to prevent water from evaporating.

Define zinc oxide?

Zinc oxide is a topical medication used to treat or prevent minor skin irritations such as burns, cuts, and diaper rash. Some items can be used as sunscreen.

Zinc Oxide which is also known as Calamine or Zinc White is an inorganic compound. It basically occurs naturally as the mineral zincite. It is mostly manufactured synthetically.

Zinc oxide powders are commonly found in foot powders and makeup. It is also used as an ointment in diaper rash and sun protection products.

Zinc oxide is a sunscreen ingredient derived from minerals. Zinc oxide is ideal for both daily and intense sun exposure due to its ability to block the broadest spectrum of UV light. It protects against both UVA and UVB rays.

To learn more about Zinc oxide refers to:

https://brainly.com/question/28566822

#SPJ1

Catalyst is a material that speeds up a chemical reaction without changing chemically on its own in the process.

In a catalysed process, the catalyst typically reacts chemically with the reactants but is ultimately renewed, maintaining the same catalyst concentration. Each catalyst molecule has the potential to cause the transformation of several reactant molecules because the catalyst is not consumed. One catalyst molecule may be able to change as many as several million molecules each minute for an active catalyst. later, at the end of reaction catalyst remain same.

By reducing the activation energy, a catalyst quickens the process.

The catalyst only gets eaten in one phase and gets rebuilt in another, not actively participating in the reaction. and it only needs a minimal amount.

The reaction's equilibrium constant is unaffected by a catalyst. It only quickens the pace at which equilibrium is reached.

For more such questions on catalyst, Visit:

https://brainly.com/question/12507566

#SPJ4

The given statement that "When smelling too many intense smells, it can become difficult to tell the difference between odors." is TRUE.

How does this happen?

When you are exposed to strong or intense odors for a prolonged period, it can overstimulate your sense of smell and make it difficult to distinguish between different scents.

This phenomenon is called olfactory fatigue or adaptation. It occurs because the nerve receptors in your nose become less sensitive to the odor after continuous exposure, making it harder to detect subtle differences in smell.

Read more about olfactory here:

https://brainly.com/question/13153033

#SPJ1

The gas's new capacity is 4.8 Liters. A gas has a volume of 4.5 liters and a temperature of 14ºC . When the temperature reaches 29 °C.

The ideal gas constant is the name of something like the variable in the equation. The ideal gas equation's choice of units for tension, temperature, and volume affects the classical physics constant's value.

V₁/T₁ = V₂/T₂ (Charles' Law)

T is in Kelvin. Celsius temp plus 273.15 = K

T₁ = 14 +273

= 287 K

T₂ = 29 + 273

= 303 K

4.5 / 287 = V₂ / 303

V₂ = 4.75 L

= 4.8 L

To know more about temperature visit :-

https://brainly.com/question/11464844

#SPJ1

The type of movement that occurs in the plate movement listed above include the following:

These are gigantic pieces of the Earth's crust and uppermost mantle and are made up of oceanic crust and continental crust.

A convergent boundary as the name implies occurs when lithospheric plates are moving towards one another.

Read more about Tectonic plate here https://brainly.com/question/1162125

#SPJ1

Silver, calcium, silicon etc. are pure elements and toluene, sulphur trioxide, sugar etc. are compounds  formed by the combination of different elements.

Mixtures are combinations of two or more individual components. They can be chemically mixed or just adhered by physical mixing.  Homogenous mixtures form one phase with all components in a single phase. For example salt solution, sugar solution etc.

Heterogenous mixtures forms separate phases and appear as different layers in the system. For example, soil, juice with pulp, sand etc.,

Different compounds are formed by the combination of atoms of different elements through chemical bonding such as ionic bonding, covalent bonding etc.

Find more on mixtures:

https://brainly.com/question/24898889

#SPJ1

The electron configuration of magnesium is shown by stating that there are 12 electrons in the first shell, 8 electrons in the second level, and 2 more electrons in the third level.

The atom contains electrons, which are negatively charged particles. The electrons in the atom revolve around the nucleus, which also contains protons and neutrons.

When there are electrons in an atom's orbital, it is said to have an electron arrangement. Electrons can also be found in the atom's various cells.

Since magnesium will occupy the first shell, there will be 12 electrons in Mg. It is still necessary to insert 12-2=10 electrons. The final two electrons and eight remaining electrons will both be in the n=2 level.

To learn more about Electrons :

https://brainly.com/question/26311715

#SPJ4

Answer:

The blades are kept near the surface by tiny floats. These hollow gas-filled bladders are called pneumatocysts. Kelp blades also allow photosynthesis

Explanation: