The equilibrium constant for the reaction H2(g) + CO2(g) H2O(g) + CO(g)is 34000.
At 823 K, the given equilibria were attained and given below; CoO(s) + H2(g) Co(s) + H2O(g) K_{c} = 68CoO(s) + CO(g) Co(s) + CO2(g) K_{c} = 500We need to calculate the equilibrium constant for the following reaction;H2(g) + CO2(g) H2O(g) + CO(g)The overall reaction can be written by summing up the given two equations; CoO(s) + H2(g) Co(s) + H2O(g) CoO(s) + CO(g) Co(s) + CO2(g) ------------------------- CoO(s) + H2(g) + CoO(s) + CO(g) Co(s) + H2O(g) + Co(s) + CO2(g) ------------------------- H2(g) + CO2(g) H2O(g) + CO(g).
To calculate the equilibrium constant K_{c} for the above overall reaction. We can calculate K_{c} by using the equilibrium constants of the given reactions. Here is the solution below; K_{c (overall)} = K_{c1} x K_{c2}K_{c (overall)} = 68 x 500K_{c (overall)} = 34000By multiplying K_{c1} and K_{c2}, we got the overall equilibrium constant K_{c} as 34000.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
what is the value of kb for the cyanide anion, cn-? ka(hcn) = 6×10-10
We know that Kw (ionization constant of water) = Ka × KbKb (ionization constant of water) = Kw/Ka = 1.0 × 10-14/6 × 10-10Kb = 1.67 × 10-5
Therefore, the value of Kb for the cyanide anion,
CN- is 1.67 × 10-5.
The value of kb for the cyanide anion, CN-, can be calculated as follows:First, we need to write the chemical reaction between HCN and
H2O.HCN + H2O ⇌ H3O+ + CN-
Here, HCN acts as an acid and donates H+ ion to water to form hydronium ion, H3O+.Water acts as a base and accepts the H+ ion from HCN to form CN- ion.Now, we can write the equilibrium constant expression for this reaction.
Ka = [H3O+][CN-]/[HCN] = 6 × 10-10
We know that Kw (ionization constant of water) = Ka × KbKb (ionization constant of water) = Kw/Ka = 1.0 × 10-14/6 × 10-10Kb = 1.67 × 10-5
Therefore, the value of Kb for the cyanide anion,
CN- is 1.67 × 10-5.
To know more about cyanide anion visit:
https://brainly.com/question/28296192
#SPJ11
Zn2+(aq)+2e−→Zn(s)
Identify the anode and cathode when plating an iron nail with zinc.
Options:
Zinc is the anode and iron is the cathode.
Iron is the anode and zinc is the cathode.
Zinc acts as both the anode and cathode.
Iron acts as both the anode and cathode.
The correct option is: Zinc is the anode and iron is the cathode.
In the given reaction, Zn2+(aq) + 2e− → Zn(s), zinc ions (Zn2+) are being reduced to zinc metal (Zn) by gaining electrons. The electrons are supplied by the anode, which is the electrode where oxidation occurs. Therefore, in the process of plating an iron nail with zinc, the zinc electrode will act as the anode.
On the other hand, the iron nail is being plated with zinc, so it is gaining zinc ions and being reduced. The electrode where reduction occurs is called the cathode. Hence, in this process, the iron nail will act as the cathode.
Therefore, the correct option is: Zinc is the anode and iron is the cathode.
To know more about anode visit:
https://brainly.com/question/17109743
#SPJ11
Which of the following are good nucleophiles and strong bases? Choose all that apply. Ol. NaCCCH3 II. LIN(CH(CH3)2)/2 III. CH3CO2Na IV. KOCH2CH3 V. CH3CH2NH2 VI. HOC(CH3)3 VII. CH3CH2SNa
The following are good nucleophiles and strong bases:NaCCCH3LIN(CH(CH3)2)/2CH3CH2NH2HOC(CH3)3CH3CH2SNa.
Nucleophiles are chemical species that are attracted to positively charged species (referred to as electrophiles). In contrast, a strong base refers to a substance that deprotonates very easily and, in the process, generates hydroxide (OH–) ions.
Let's analyze the given options and determine the good nucleophiles and strong bases. NaCCCH3: It is a poor nucleophile but a strong base. Therefore, it is not a good nucleophile and a strong base.
To know more about nucleophiles visit:
https://brainly.com/question/30333156
#SPJ11
what is the poh equation? how can poh be determined from ph?
POH equation
The pOH equation is the negative base-10 logarithm of the hydroxide ion concentration of a solution.
A solution's pOH can be calculated from its pH using the following formula: pOH = 14 - pHPure water, which has a neutral pH of 7, has a pOH of 7 as well since the concentration of hydroxide ions in pure water is equal to the concentration of hydrogen ions. Any solution with a pH less than 7 is acidic, with a corresponding pOH greater than 7. Any solution with a pH greater than 7 is basic, with a corresponding pOH less than 7. It is important to remember that pH and pOH are related with the sum of the two always equal to 14. In conclusion, the pOH equation is the negative base-10 logarithm of the hydroxide ion concentration of a solution. A solution's pOH can be calculated from its pH using the formula pOH = 14 - pH.
Learn more about POH
https://brainly.com/question/10633941
#SPJ11
the reactant side of a balanced chemical equation is shown below. al2(so4)3 3cl2 → how many chlorine atoms should there be on the product side in the equation?
There should be a total of 6 chlorine atoms on the product side of the equation Al₂ (SO₄ )₃ + 3Cl₂. This is determined by multiplying the coefficient (3) in front of Cl₂ by the number of chlorine atoms in one molecule of Cl₂ (2).
How many chlorine atoms produced?In the given balanced chemical equation, Al₂ (SO₄ )₃ + 3Cl₂ →, we are asked to determine the number of chlorine atoms on the product side of the equation.
The coefficient in front of Cl₂ on the reactant side is 3, which indicates that three molecules of chlorine gas (Cl₂ ) are involved in the reaction. Each molecule of chlorine gas consists of two chlorine atoms (Cl-Cl).
Therefore, to calculate the total number of chlorine atoms on the product side, we multiply the coefficient (3) by the number of chlorine atoms in one molecule of Cl₂ (2).
3 (coefficient) × 2 (chlorine atoms per molecule of Cl₂ ) = 6 chlorine atoms.
Hence, there should be a total of 6 chlorine atoms on the product side of the balanced chemical equation. This calculation is based on the law of conservation of mass, which states that the number of atoms of each element must be the same on both sides of a balanced chemical equation.
Learn more about chlorine atoms
brainly.com/question/28846612
#SPJ11
draw the molecular orbital diagram to determine which of the following is paramagnetic.
Molecular Orbital (MO) theory Molecular Orbital (MO) theory is the basis for understanding chemical bonding in metal coordination compounds, organic molecules, and some inorganic compounds.
The MO theory conceptually follows the VB theory, which combines atomic orbitals (AOs) from each atom in a molecule into valence bond orbitals (VBOs) that have some electron density between them and help explain bond strength. MO theory, on the other hand, combines all of the molecular orbitals (MOs) from every atom in a molecule into a series of molecular orbitals that describe the distribution of electrons over the whole molecule. The number of MOs generated is the same as the number of AOs combined. The following are the molecular orbitals generated from the combination of s-orbitals: σs, the bonding MO, and σs*, the antibonding MO.
It's a bit more complicated than H2 because O2 has more electrons. In the MO diagram, we start by placing the atomic orbitals from each atom on opposite sides and mixing them to generate molecular orbitals. The electrons fill the molecular orbitals from the bottom up, and Hund's rule dictates that each orbital must be filled with one electron before any can hold a second electron. The diagram above is for O2, which is paramagnetic since it has two unpaired electrons in its antibonding pi orbitals. Consequently, O2 is easily attracted into magnetic fields.
To know more about Hund's rule visit
https://brainly.com/question/12646067
#SPJ11
A solution of urea in water has a boiling point of 100.18oC. Calculate the freezing point of the solution. (Kf for water is 1.86 K kg mol^-1 and Kb for water is 0.512 K kg mol1).
the freezing point of the urea solution is -0.6552°C.
The formula for freezing point depression can be used to calculate the freezing point of the solution:
ΔTf = Kf × m
Where ΔTf is the change in the freezing point, Kf is the freezing point depression constant, and m is the molality of the solution. We can use the relationship between molality, mass, and molar mass to find the molality of the solution:m = (moles of solute) / (mass of solvent in kg)Since we know the mass of the solvent (water), we can use the boiling point elevation to find the moles of solute (urea).
ΔTb = Kb × mΔTb = 100.18 - 100 = 0.18 K0.18 = 0.512 × mmm = 0.352 mol/kg
The molality can be used to calculate the freezing point depression:
ΔTf = Kf × mΔTf = 1.86 K kg mol^-1 × 0.352 mol/kg
ΔTf = 0.6552 K
Since the freezing point is lowered by this amount, we can find the freezing point of the solution by subtracting this value from the freezing point of pure water:
Freezing point of solution = 0°C - ΔTf = 0°C - 0.6552 K = -0.6552°C
Therefore, the freezing point of the urea solution is -0.6552°C.
learn more about freezing point here
https://brainly.com/question/31357864
#SPJ11
determine the velocity of point on the rim of the gear at the instant shown.
The velocity of a point on the rim of a gear can be determined by multiplying the angular velocity of the gear by the radius of the gear. The angular velocity of a gear is the speed at which it rotates in radians per second. We can use the following formula to calculate
the velocity of a point on the rim of a gear at any given time :v = rωLong The velocity of a point on the rim of a gear is determined by the angular velocity and the radius of the gear. The angular velocity of a gear is the speed at which it rotates in radians per second. We can use the following formula to calculate the velocity of a point on the rim of a gear at any given time:v = rωwhere v is the velocity of the point on the rim of the gear, r is the radius of the gear, and ω is the angular velocity of the gear.To find the angular velocity of the gear, we need to first find the angular displacement of the gear. The angular displacement is the change in the angle of the gear over a given time interval. We can use the following formula to calculate the angular displacement:θ = ωtwhere θ is the angular displacement of the gear, ω is the angular velocity of the gear, and t is the time interval.
To find the angular velocity of the gear, we can rearrange the formula to get:ω = θ/t Now, we can plug in the values we know into the formula to get the angular velocity of the gear:ω = 60/3ω = 20 rad/s Finally, we can use the formula:v = rωto find the velocity of a point on the rim of the gear at the instant shown. We know that the radius of the gear is 0.2 m, so we can plug that in along with the angular velocity we just calculated v = rωv = 0.2 x 20v = 4 m/s he velocity of a point on the rim of a gear is equal to the product of the angular velocity and the radius of the gear. In order to find the angular velocity of the gear, we first need to find the angular displacement over a given time interval. We can then use the formula for angular velocity to find the angular velocity of the gear. Finally, we can use the formula for velocity to find the velocity of a point on the rim of the gear at the instant shown.
To know more about determined Visit;
https://brainly.com/question/12089834
#SPJ11
a solution is made by mixing 0.325 moles of sodium nitrate and 0.125 moles of hcl in a total volume of 250.0 ml. calculate ph
The pH of the given solution is 1.88.
When both of these are mixed, NaNO3 and HCl undergoes neutralization, and the HNO3 formed is a weak acid that hydrolyses, resulting in a weakly acidic solution.To calculate the pH of the solution, we first need to find out the amount of NaNO3 that hydrolyses.
0.125 moles of HCl are completely neutralized by the NaOH of NaNO3, leaving
0.325-0.125 = 0.2 moles of NaNO3 in solution.
Now we can calculate the concentration of the weak acid HNO3 by using the expression;
HNO3 + H2O -> H3O+ + NO3-
Ka = [H3O+][NO3-] / [HNO3]Ka = 4.5 × 10-4M
= [H3O+]2 / [0.2 M] 0.2 M [HNO3]
= (4.5 × 10-4M)1/2 = 6.7 × 10-3 M
We can use this concentration to calculate the pH of the solution:
pH = -log[H3O+]pH = -log(6.7 × 10-3) ≈ 1.88
Hence, the pH of the given solution is 1.88.
learn more about neutralization here
https://brainly.com/question/23008798
#SPJ11
1- consider the tube stabbed with the sterile inoculating needle
a- is this positive or negative control
b- what information is provided by the sterile stabbed tube?
2- why is it important to carefully insert and remove the needle along the same tab line ?
3- consider the TTC indicator.
a- why is it essential that reduced TTC be insoluble?
b- why is there less concern about the solubility of the oxidized form of TTC?
Given bellow are the answers to the above questions related to sterile inoculating needle:
1- Consider the tube stabbed with the sterile inoculating needle:
a) It is a negative control.
b) The sterile stabbed tube provides information about any contamination that may have been picked up in the process of transferring the inoculum to the test tube.
2- It is important to carefully insert and remove the needle along the same tab line to avoid dragging microorganisms up and down the needle track, which can result in cross-contamination and a false positive result.
3- Consider the TTC indicator.
a) It is essential that reduced TTC be insoluble because the insoluble form is the only form that can be detected. Insoluble TTC forms a visible red precipitate that indicates bacterial growth.
b) There is less concern about the solubility of the oxidized form of TTC because it does not provide an accurate indication of bacterial growth. The oxidized form is soluble in water, and its color is indistinguishable from the color of the medium.
To know more about inoculating visit:
https://brainly.com/question/32615538
#SPJ11
when 100.0 ml of 0.40 m of ch3cooh and 50.0 ml of 0.40 m of naoh are mixed, the resulting mixture is _____________.
The resulting mixture is a buffer. A buffer is an aqueous solution that can resist changes in pH when small amounts of an acid or base are added to it. A buffer solution is created by combining a weak acid acetic acid and its salt with a strong base sodium hydroxide, sodium acetate.
According to the given statement,100.0 ml of 0.40 m of CH3COOH acetic acid and 50.0 ml of 0.40 m of NaOH sodium hydroxide are mixed. Both acetic acid and sodium hydroxide are of equal concentrations, i.e. 0.40 M. Since acetic acid is a weak acid and sodium hydroxide is a strong base, the resulting solution will be slightly basic. The reaction that occurs between acetic acid and sodium hydroxide is CH3COOH(aq) + NaOH(aq) → CH3COONa(aq) + H2O(l).
This reaction produces sodium acetate and water. The conjugate acid base pair in the buffer solution is CH3COOH/CH3COO-. Because this buffer has a weak acid and its salt, it will resist changes in pH when acid or base is added to it. The resulting mixture is a buffer. This solution will have a pH greater than 7, which means it will be slightly basic.
To know more about acid visit:
https://brainly.com/question/29796621
#SPJ11
What is the behavior one engages in when no one else is present, when they are free from the rules and norms of interaction governing day-to-day interactions with others called?
a.) Backstage
b.) Frontstage
c.) Sidestage
d.) Center stage
The correct answer is a) Backstage. It is the behavior one engages in when no one else is present, when they are free from the rules and norms of interaction governing day-to-day interactions.
In the context of social interactions, the concept of frontstage and backstage was introduced by sociologist Erving Goffman. Frontstage refers to the social setting where individuals perform their roles and engage in interactions with others in accordance with the norms and expectations of society. It is the public realm where individuals are conscious of their behavior and present a certain image to others. On the other hand, backstage refers to the private setting where individuals are free from the gaze of others and the expectations of social performance. It is the space where individuals can relax, be themselves, and engage in behaviors that may not be appropriate or conform to societal norms in the frontstage.
Therefore, when no one else is present and individuals are free from the rules and norms of interaction, they engage in backstage behavior. This includes actions, expressions, and behaviors that are typically hidden from public view and may be more informal, unguarded, or even deviant compared to frontstage behavior. It provides individuals with a sense of privacy and a space to express themselves without the need to adhere to societal expectations. Hence the correct answer is a) Backstage
for more questions on interaction
https://brainly.com/question/18742537
#SPJ8
what is the mass in grams of 1.553 cmol( ) of sodium (na ), where cmol( ) is the moles of charge due to the ion?
The given substance is sodium (Na) which has a molar mass of 22.98976928 g/mol. We can use this information along with the given value of cmol to find the mass of the substance in grams.
Therefore, the mass in grams of 1.553 cmol of sodium (Na) is 34.92 g.Explanation:To calculate the mass in grams of 1.553 cmol of sodium (Na), we can use the following formula:Mass = Molar mass × Number of moles (n)The given value of 1.553 cmol can be converted to moles by dividing it by the charge of the sodium ion (Na+) which is +1.
Therefore,1.553 cmol Na+ = 1.553 mol Na+To find the molar mass of sodium (Na), we look it up on the periodic table which is 22.98976928 g/mol.Molar mass (M) of Na = 22.98976928 g/molUsing the formula above, we can now calculate the mass of 1.553 cmol of sodium (Na).Mass = 22.98976928 g/mol × 1.553 mol= 34.92 gTherefore, the mass in grams of 1.553 cmol of sodium (Na) is 34.92 g (main answer).
To know more about sodium visit:
https://brainly.com/question/30878702
#SPJ11
.How much NaNO3 is needed to prepare 225 mL of a 1.55 M solution of NaNO3? A. 29.6 g B. 0.244 g C. 12.3 g D. 4.10 g E. 0.132 g
We have to calculate how much NaNO3 is needed to prepare a 225 mL of 1.55 M solution of NaNO3. Molarity (M) = (Amount of solute (in moles)) / (Volume of solution (in liters))
The answer to the given question is option A, which is 29.6 g.
Explanation: We have to calculate how much NaNO3 is needed to prepare a 225 mL of 1.55 M solution of NaNO3.
Molarity (M) = (Amount of solute (in moles)) / (Volume of solution (in liters))
We know, Amount of solute (in moles) = Molarity (M) × Volume of solution (in liters) = 1.55 M × 0.225 L = 0.34875 moles
We need to find the amount of NaNO3 in grams. For this, we need to use the following formula:
Amount of solute (in grams) = Amount of solute (in moles) × Molar mass of solute (in g/mol)
Molar mass of NaNO3 = (23 + 14 + 3×16) g/mol = 85 g/mol
Now, Amount of solute (in grams) = 0.34875 moles × 85 g/mol ≈ 29.6 g
Therefore, the amount of NaNO3 needed to prepare 225 mL of a 1.55 M solution of NaNO3 is approximately 29.6 g.
To know more about Molarity visit: https://brainly.com/question/2817451
#SPJ11
The molecular formula C5H10 can refer to which of the following molecules?Cyclopentane1-pentene2-penteneAll of the above
The molecular formula C5H10 can refer to which of the following molecules: Cyclopentane, 1-pentene, 2-pentene.All of the above is the correct option among the given options above.
Each carbon atom of the molecule should form four covalent bonds with other atoms. Hydrogen atoms, which can form only one bond, will have to attach to carbon atoms. The molecular formula C5H10 can refer to which of the following molecules: Cyclopentane, 1-pentene, 2-pentene.All of the above is the correct option among the given options above.
As a result, the number of hydrogen atoms bonded to each carbon atom determines the molecule's structure.There are three different structural isomers with a molecular formula of C5H10: pentene isomers (1-pentene and 2-pentene) and cyclopentane.
To know more about molecular formula visit :
https://brainly.com/question/28647690
#SPJ11
Consider the following reaction where Kc = 1.80E-2 at 698 K: 2 HI(g) H2(g) + I2(g) A reaction mixture was found to contain 0.283 moles of HI(g), 2.18E-2 moles of H2(g), and 4.17E-2 moles of I2(g), in a 1.00 liter container. Is the reaction at equilibrium? If not, what direction must it run in order to reach equilibrium? The reaction quotient, Qc = . The reaction: A. must run in the forward direction to reach equilibrium. B. must run in the reverse direction to reach equilibrium. C. is at equilibrium.
The reaction is not at equilibrium. In order to reach equilibrium, the reaction must run in the forward direction, i.e., in the direction of the reactants. The answer is (A) must run in the forward direction to reach equilibrium.
The initial concentrations of the given reaction are:
[HI] = 0.283 M[H2] = 2.18 × 10⁻² M[I2] = 4.17 × 10⁻² M
Here, the reaction quotient is calculated by plugging in the initial concentrations. Then, the value of Qc is:
Qc = [H2][I2]/[HI]² Qc = (2.18 × 10⁻²) (4.17 × 10⁻²)/0.283²
Qc = 1.19
Now, we compare the value of Qc with the equilibrium constant value, Kc. If Qc > Kc, the reaction quotient is greater than the equilibrium constant. Hence, the reaction is not at equilibrium. In such a case, the reaction must run in the forward direction to reach equilibrium. If Qc < Kc, the reaction quotient is less than the equilibrium constant. Hence, the reaction is not at equilibrium. In such a case, the reaction must run in the reverse direction to reach equilibrium. If Qc = Kc, the reaction quotient is equal to the equilibrium constant. Hence, the reaction is at equilibrium. Here, Qc = 1.19 and Kc = 1.80 × 10⁻², Qc is greater than Kc. So, the reaction is not at equilibrium. In order to reach equilibrium, the reaction must run in the forward direction, i.e., in the direction of the reactants. The answer is (A) must run in the forward direction to reach equilibrium.
To know more about reactants visit: https://brainly.com/question/30129541
#SPJ11
calculate the standard entropy change for the reaction at 25 °c. standard molar entropy values can be found in this table. c3h8(g) 5o2(g)⟶3co2(g) 4h2o(g) δ∘rxn= 165.7 j/k
The standard entropy change for the given reaction at 25 °C is 107.9 J/K mol.
The standard entropy change for the given reaction at 25 °C needs to be calculated. The standard molar entropy values are provided in the table given below: Substance S° (J/K mol)C3H8(g) 269.9O2(g) 205.0CO2(g) 213.6H2O(g) 188.8The balanced chemical reaction is given as:C3H8(g) + 5O2(g) ⟶ 3CO2(g) + 4H2O(g).
The equation shows that 3 moles of CO2(g) and 4 moles of H2O(g) are formed by the combustion of 1 mole of C3H8(g). Therefore, the standard entropy change of the given reaction at 25 °C can be calculated as follows:ΔS°rxn = [3S°(CO2(g)) + 4S°(H2O(g))] - [S°(C3H8(g)) + 5S°(O2(g))]ΔS°rxn = [3(213.6 J/K mol) + 4(188.8 J/K mol)] - [269.9 J/K mol + 5(205.0 J/K mol)] ΔS°rxn = 107.9 J/K mol.
To know more about entropy visit:
https://brainly.com/question/20166134
#SPJ11
A chemist titrates 230.0 mL of a 0.0532M nitrous acid (HNO_2) solution with 0.2981 M NaOH solution at 25 degree C, calculate the pH at equivalence. The pK_a of nitrous acid is 3.35. Round your answer to 2 decimal places. Note for advanced students: you may assume the total volume of the solution equals the initial volume plus the volume of NaOH solution added.
To calculate the pH at equivalence in the titration of nitrous acid (HNO2) with NaOH, we need to determine the amount of nitrous acid and sodium hydroxide at the equivalence point and then calculate the resulting pH.
First, let's find the moles of HNO2 initially present in the 230.0 mL solution:
moles of HNO2 = volume (L) × concentration (M) = 0.2300 L × 0.0532 M = 0.012236 mol. Since the stoichiometry of the reaction is 1:1 between HNO2 and NaOH, the number of moles of NaOH required to reach the equivalence point is also 0.012236 mol.Now, let's calculate the total volume of the solution at the equivalence point. We assume that the total volume equals the initial volume plus the volume of NaOH solution added: total volume = 230.0 mL + volume of NaOH solution added. At the equivalence point, the moles of NaOH added equals the moles of HNO2 initially present. So we can use this information to find the volume of NaOH solution added: moles of NaOH = 0.012236 mol
concentration of NaOH = 0.2981 M
volume of NaOH solution added = moles / concentration = 0.012236 mol / 0.2981 M = 0.04111 L = 41.11 mL
The total volume at the equivalence point is 230.0 mL + 41.11 mL = 271.11 mL.Since the stoichiometry of the reaction is 1:1, the concentration of HNO2 at the equivalence point can be calculated as follows:
concentration of HNO2 = moles / total volume = 0.012236 mol / 0.27111 L = 0.0451 M
Now, we can calculate the pH at equivalence using the pKa of nitrous acid (HNO2): pH = pKa + log([NaOH] / [HNO2])
pKa = 3.35
[NaOH] = concentration of NaOH = 0.2981 M
[HNO2] = concentration of HNO2 = 0.0451 M
pH = 3.35 + log(0.2981 / 0.0451) = 3.35 + log(6.606)
Using logarithm properties, we can calculate: pH ≈ 3.35 + 0.82 ≈ 4.17
Therefore, the pH at equivalence in the titration of nitrous acid (HNO2) with NaOH is approximately 4.17 (rounded to 2 decimal places).
To learn more about titration:
https://brainly.com/question/31483031
#SPJ11
What mass of lithium chloride is found in 85 g of a 25% by mass solution? Find the mass percent composition of Br in CuBr_2 A 4.56 g sugar cube (Sucrose: C_12 H_33O_11) is dissolved in a 350, mi teacup of 80 degree C water. What is the mass percent composition of the sugar solution? Given: Density of water at 80 degree C = 0.975 g/ml Fill in the chart below using the information provided.
Given Mass = 85 concentration = 25% by mass. Mass % = (Mass of solute / Mass of solution) × 100%Therefore,Mass of solute = Mass % × Mass of solution / 100%We have Mass % and Mass of solution.
So, we can find the Mass of solute. Mass of lithium chloride = 25% × 85 g / 100% = 21.25 therefore, 21.25 g of lithium chloride is found in 85 g of a 25% by mass solution. Given CuBr2Mass of Br in CuBr2 = 2 × Atomic mass of Br = 2 × 79.904 = 159.808 gMass % composition of Br = (Mass of Br / Molecular mass of CuBr2) × 100%Molecular mass of CuBr2 = Atomic mass of Cu + Atomic mass of 2Br = 63.546 + 2 × 79.904 = 223.354 g/molars % composition of Br = (159.808 / 223.354) × 100% = 71.53%Given Mass of Sucrose = 4.56 volume of water = 350 density of water = 0.975 g/temperature of water = 80°CWe can use the below formula to calculate the mass % composition of the sugar solution.
Mass % composition = (Mass of solute / Mass of solution) × 100%Mass of water = Volume of water × Density of water = 350 ml × 0.975 g/ml = 341.25 gMass of solute = Mass of Sucrose = 4.56 gMass of solution = Mass of Sucrose + Mass of water = 4.56 g + 341.25 g = 345.81 gMass % composition = (4.56 / 345.81) × 100% = 1.32%The table is: | Properties | LiCl | CuBr2 | Sugar Solution | |---------------|---------------|----------------|----------------| | Mass | 21.25 g | - | 4.56 g | | Mass % | - | 71.53% | 1.32% | | Molecular Mass| - | 223.354 g/mol | - |
Read more about Molecular mass here;https://brainly.com/question/837939
#SPJ11
write a balanced chemical equation for when solutions of sodium phosphate and copper (ii) sulfate are combined. identify the solid precipitate product. what type of reaction is this?
The balanced chemical equation for the reaction between sodium phosphate (Na3PO4) and copper (II) sulfate (CuSO4) is as follows:
3Na3PO4 + 2CuSO4 → Cu3(PO4)2 + 3Na2SO4
This reaction is a double displacement or precipitation reaction.
In this reaction, a precipitate of copper(II) phosphate (Cu3(PO4)2) is formed. Copper(II) phosphate is a solid that is insoluble in water, which causes it to precipitate out of the solution.
This reaction is a double displacement or precipitation reaction. It involves the exchange of ions between the two compounds to form a solid precipitate and soluble salts. The sodium and copper ions swap partners to form sodium sulfate (Na2SO4) and copper(II) phosphate (Cu3(PO4)2), respectively.
Therefore,
The balanced chemical equation for the reaction between sodium phosphate (Na3PO4) and copper (II) sulfate (CuSO4) is as follows:
3Na3PO4 + 2CuSO4 → Cu3(PO4)2 + 3Na2SO4
This reaction is a double displacement or precipitation reaction.
To know more about sodium visit :
https://brainly.com/question/25597694
#SPJ11
In an aqueous solution of a certain acid with pKa = 4.60 the pH is 3.16. Calculate the percent of the acid that is dissociated in this solution. Round your answer to 2 significant digits
Approximately 3.98% of the acid is dissociated in this solution.
To calculate the percent of the acid that is dissociated in the solution, we can use the Henderson-Hasselbalch equation:
pH = pKa + log ([A-]/[HA])
Given that the pKa of the acid is 4.60 and the pH of the solution is 3.16, we can rearrange the equation as follows:
3.16 = 4.60 + log ([A-]/[HA])
Subtracting 4.60 from both sides of the equation, we get:
-1.44 = log ([A-]/[HA])
To eliminate the logarithm, we can convert the equation into exponential form:
10^(-1.44) = [A-]/[HA]
Solving for [A-]/[HA], we find:
[A-]/[HA] = 0.0398
To express this ratio as a percentage, we multiply it by 100:
[A-]/[HA] = 3.98%
Therefore, approximately 3.98% of the acid is dissociated in this solution.
To know more about acid visit:
https://brainly.com/question/27915098
#SPJ11
determine the cell potential at nonstandard conditions given the standard cell potential
The Nernst equation is used to determine the cell potential under non-standard conditions. It's a general rule that applies to all electrochemical cells, including those that aren't redox reactions, which is why it's so important. The cell potential will be determined using the Nernst equation.
Electrochemical cells and batteries are important sources of electrical energy. The redox reactions at the electrodes determine the voltage of the cell or battery, but the presence of concentration gradients or temperature variations can alter the voltage. This implies that it is critical to understand how a cell's voltage varies as a function of changing parameters such as concentration or temperature. The Nernst equation is used to calculate the cell voltage under non-standard conditions.To determine the cell potential under non-standard conditions, the Nernst equation is used.
The standard cell potential is used in the equation, which is denoted by E°.At non-standard conditions, the cell potential, Ecell, is given by the Nernst equation:E cell = E° - (RT/nF) ln(Q)where, E° is the standard cell potential,R is the ideal gas constant,T is the temperature of the cell,n is the number of moles of electrons transferred in the balanced equation,F is the Faraday constant (96,485 C/mol), andQ is the reaction quotient.
To know more about electrochemical visit:
https://brainly.com/question/31606417
#SPJ11
Which items correctly complete the following statment A catalyst can act in a chemical reaction to: (I) increase the equilibrium constant. (II) lower the activation energy. (III) decrease the enthalpy for tine reaction. (IV) provide a new path for the reaction. II \& IV I \& II II \& III I \& III
A catalyst can act in a chemical reaction to lower the activation energy and provide a new path for the reaction. The correct items that complete the statement are II & IV.
In chemistry, a catalyst is a substance that accelerates the rate of a chemical reaction. It is not a reactant, and it is not consumed during the reaction. A catalyst can act in a chemical reaction to lower the activation energy and provide a new path for the reaction. It is a substance that speeds up the rate of a reaction by providing an alternative pathway for the reaction that has a lower activation energy.
The role of the catalyst is to lower the activation energy, which is the energy that must be supplied to the reactants to initiate the chemical reaction. A lower activation energy means that a greater proportion of reactant molecules have sufficient energy to react when they collide.
To know more about catalyst visit:-
https://brainly.com/question/24430084
#SPJ11
Cu2+(aq) + 2e- ⇒ Cu(s) Eº = 0.34 V
Cr3+(aq) + e- ⇒ Cr2+(aq) Eº = -0.41 V
According to the half-reactions represented above, which of the following occurs in aqueous solutions under standard conditions?
a. Cu2+(aq) + Cr3+(aq) ⇒ Cu(s) + Cr2+(aq)
b. Cu2+(aq) + 2Cr2+(aq) ⇒ Cu(s) + 2Cr3+(aq)
c. Cu(s) + 2Cr3+(aq) ⇒ Cu2+(aq) + 2Cr2+(aq)
d. Cu(s) + Cr3+(aq) ⇒ Cu2+(aq) + Cr2+(aq)
e. 2Cu2+(aq) + Cr3+(aq) ⇒ 2Cu(s) + Cr2+(aq)
The correct option is d. Cu(s) + Cr3+(aq) ⇒ Cu2+(aq) + Cr2+(aq).
Standard conditions refer to a temperature of 298 K and a pressure of 1 atm. The standard reduction potential Eº is the tendency of an element or compound to be reduced and therefore acts as a measure of the oxidizing or reducing power of the substance. In a redox reaction, one element is oxidized while the other is reduced. Electrons are transferred between the species in a redox reaction. An oxidizing agent oxidizes the other element while reducing itself, while a reducing agent reduces the other element while oxidizing itself. We must compare the standard reduction potentials of the two half-reactions.
A positive value of Eº shows that a reduction reaction will occur, while a negative value indicates that an oxidation reaction will occur. In this case, we have the following half reactions:
Cu2+(aq) + 2e- ⇒ Cu(s) Eº = 0.34 V
Cr3+(aq) + e- ⇒ Cr2+(aq) Eº = -0.41 V
We see that Cu2+ has a greater reduction potential than Cr3+. As a result, the Cu2+ ion will act as an oxidizing agent, whereas the Cr3+ ion will act as a reducing agent. When Cu2+ and Cr3+ are mixed, the following redox reaction will occur: Cu(s) + Cr3+(aq) ⇒ Cu2+(aq) + Cr2+(aq)Hence, the correct answer is d. Cu(s) + Cr3+(aq) ⇒ Cu2+(aq) + Cr2+(aq).
To know more about redox reaction refer to:
https://brainly.com/question/1161855
#SPJ11
Exploring the Gas Laws with Alka Seltzer
What are the assumptions we make when using the apparatus in this lab? (Select all that apply)
A. Percent recovery accounts for all the CO2 lost during water displacement after capping the test tube
B. The pressure and temperature of the room remain constant
C. We make no assumptions in this lab
D. The reaction begins after the test tube is capped, so CO2 is not lost to the atmosphere
The correct assumptions in this lab are that the pressure and temperature of the room remain constant and the reaction begins after the test tube is capped, so CO₂ is not lost to the atmosphere. Therefore options B and D are correct.
The pressure and temperature of the room remain constant:
In order to accurately apply the gas laws, it is necessary to assume that the pressure and temperature of the room remain constant throughout the experiment.
Any significant changes in pressure or temperature could affect the results and lead to inaccurate conclusions about the gas laws.
The pressure and temperature of the room remain constant:
In order to accurately apply the gas laws, it is necessary to assume that the pressure and temperature of the room remain constant throughout the experiment.
Any significant changes in pressure or temperature could affect the results and lead to inaccurate conclusions about the gas laws.
Know more about gas laws:
https://brainly.com/question/30458409
#SPJ4
complete and balance the following equation: cr2o72−(aq) ch3oh(aq)→hco2h(aq) cr3 (aq)(acidic solution)
The balanced equation for the reaction between dichromate ion (Cr2O7^2-) and methanol (CH3OH) in an acidic solution is as follows:
2 Cr2O7^2-(aq) + 3 CH3OH(aq) -> 2 HCO2H(aq) + 4 Cr^3+(aq) + 7 H2O(l)
To balance the equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation. Here's how the balancing is done:
1. Balance the chromium (Cr) atoms:
Since there are four Cr atoms on the product side, we need four Cr2O7^2- ions on the reactant side:
2 Cr2O7^2-(aq) + ...
2. Balance the oxygen (O) atoms:
There are 14 oxygen atoms on the reactant side. The only source of oxygen is the dichromate ion. So, on the product side, we need 7 water molecules (H2O):
... -> 2 HCO2H(aq) + ... + 7 H2O(l)
3. Balance the hydrogen (H) atoms:
There are 24 hydrogen atoms on the reactant side (12 from CH3OH and 12 from water). To balance, we need 24 hydrogen atoms on the product side, which can be achieved by adding 12 H+ ions (from the acidic solution):
... -> 2 HCO2H(aq) + ... + 7 H2O(l) + 12 H+(aq)
4. Balance the charge:
The reactant side has a total charge of 2- from the dichromate ion, while the product side has a total charge of 12+ from the Cr^3+ ions. To balance the charge, we need to add six electrons (6e-) on the reactant side:
2 Cr2O7^2-(aq) + 3 CH3OH(aq) + 6 e- -> 2 HCO2H(aq) + 4 Cr^3+(aq) + 7 H2O(l) + 12 H+(aq)
Finally, simplify the equation to remove the electrons:
2 Cr2O7^2-(aq) + 3 CH3OH(aq) -> 2 HCO2H(aq) + 4 Cr^3+(aq) + 7 H2O(l) + 12 H+(aq)
The balanced equation for the reaction between dichromate ion (Cr2O7^2-) and methanol (CH3OH) in an acidic solution is: 2 Cr2O7^2-(aq) + 3 CH3OH(aq) -> 2 HCO2H(aq) + 4 Cr^3+(aq) + 7 H2O(l) + 12 H+(aq)
To read more about acidic solution, visit:
https://brainly.com/question/4113018
#SPJ11
assuming complete dissociation, what is the ph of a 3.67 mg/l ba(oh)2 solution?
With complete dissociation, the pH of 3.67 mg/L [tex]Ba(OH)_2[/tex] solution is will be 12.63.
pHFirst, let's calculate the concentration of OH- ions in the solution:
Ba(OH)2 is present at 3.67 mg/L. Since the molar mass of Ba(OH)2 is 171.34 g/mol, we can convert the concentration to moles per liter (mol/L):
3.67 mg/L / 171.34 g/mol = 0.0214 mmol/L (millimoles per liter)
Since Ba(OH)2 dissociates into 2 OH- ions, the concentration of OH- ions is twice that of Ba(OH)2:
0.0214 mmol/L * 2 = 0.0428 mmol/L
To find the pOH of the solution, we can take the negative logarithm (base 10) of the OH- ion concentration:
pOH = -log10(0.0428) ≈ 1.37
Now, to find the pH, we can use the relation:
pH + pOH = 14
pH + 1.37 = 14
pH ≈ 14 - 1.37
pH ≈ 12.63
Therefore, the pH of the Ba(OH)2 solution is approximately 12.63.
More on pH can be found here: https://brainly.com/question/2288405
#SPJ4
A lightweight metallic raceway without threads is called ? in the National Electrical Code.
Select one:
a. Electrical Metallic Tubing
b. Reinforced Thermosetting Resin Conduit
c. Rigid Metal Conduit
d. Rigid Polyvinyl Chloride Conduit
A lightweight metallic raceway without threads is called Electrical Metallic Tubing in the National Electrical Code. The correct option is A. Electrical Metallic Tubing
In electrical and mechanical engineering, a conduit is a pipe or tube designed to hold and route electrical cables or wires. It is generally made of metal, plastic, or fiber and can be rigid or flexible. It is a lightweight metallic raceway without threads called Electrical Metallic Tubing in the National Electrical Code.
is used as an alternative to conduit piping, allowing for quicker installation and adjustment. EMT is used to protect wires from mechanical damage and to prevent the spread of fire. It's also used to keep wire bundles safe in walls, ceilings, and floors and to distribute electricity from a junction box to the rest of a building
To know more about Electrical Code visit:-
https://brainly.com/question/18829138
#SPJ11
las Scanned with CamScanner Which of the following statements are true regarding the use of indicators in selective media? they may react with a product from a biochemical reaction to produce a color change. they are used as substrates for the biochemical test. they provide a visible change in the media indicating a reaction. they often indicate whether an acid or base has been produced. they are selected based on their functional pH range to indicate a color change.
The following statements are true regarding the use of indicators in selective media: they provide a visible change in the media indicating a reaction.
They often indicate whether an acid or base has been produced they may react with a product from a biochemical reaction to produce a color change. Indicators are substances that change color based on their response to an alteration in pH, such as the presence of acidic or basic components. Indicators are used in selective media to reveal the presence of the required organisms. The use of indicators in selective media has several benefits.
When the organism grows in a selective medium that has been supplemented with an indicator, the presence of the organism is immediately apparent because the indicator undergoes a color change as a result of the metabolic activity of the organism.
To know more about indicators visit:-
https://brainly.com/question/29016702
#SPJ11
In which of the following would calcium fluoride be least soluble?
A) Pure water
B) 1 M NaNO3
C) 1M KF
Calcium fluoride would be least soluble in pure water compared to 1 M [tex]NaNO_3[/tex] and 1 M KF solutions.
Solubility is the ability of a substance to dissolve in a solvent. In the given options, calcium fluoride (CaF2) would be least soluble in pure water. This is because calcium fluoride is an ionic compound composed of calcium cations (Ca2+) and fluoride anions (F-).
Pure water, being a nonpolar solvent, has a low ability to dissociate ionic compounds. Therefore, the ionic bonds between the calcium and fluoride ions in calcium fluoride are less likely to be broken in pure water, resulting in low solubility.
On the other hand, both 1 M [tex]NaNO_3[/tex] and 1 M KF solutions contain ions that can compete with the calcium and fluoride ions in calcium fluoride. These solutions provide a higher concentration of ions, increasing the chances of the ionic bonds in calcium fluoride being disrupted and the compound dissolving. Therefore, calcium fluoride would be more soluble in 1 M NaNO3 or 1 M KF solutions compared to pure water.
Learn more about nonpolar solvent here.
https://brainly.com/question/14104042
#SPJ11
