The following estimated regression equation is based on 30 observations. The values of SST and SSR are 1,809 and 1,755, respectively. a. Compute R2 (to 3 decimals). X b. Compute R2 (to 3 decimals). X

For a uniform discrete distribution on the interval 1 to 10, P(X= 5) is :

0.1.

Given a uniform discrete distribution on the interval 1 to 10.

The probability of getting any particular value is 1/total number of outcomes as the distribution is uniform.

There are 10 possible outcomes. Hence the probability of getting a particular number is 1/10.

Therefore, we can write :

P(X = x) = 1/10 for x = 1,2,3,4,5,6,7,8,9,10.

Now, P(X = 5) = 1/10

P(X = 5) = 0.1.

Hence, the probability that X equals 5 is 0.1.

Therefore, the correct option is O 0.1.

To learn more about probability visit : https://brainly.com/question/13604758

#SPJ11

The given function is:[tex]y = (1/(x² - x)) × e^(-0.5x)[/tex]For finding the value of [tex]dy/dx at x = 2[/tex], using forward difference method and interval of 0.5,

we can use the formula:[tex](dy/dx)x = [y(x + h) - y(x)][/tex]/hwhere h = interval = 0.5 and x = 2So, we get:[tex](dy/dx)₂ = [y(2.5) - y(2)]/0.5Here, y(x) = (1/(x² - x)) × e^(-0.5x)So, y(2) = (1/(2² - 2)) × e^(-0.5 × 2)= (1/2) × e^(-1)= 0.3033[/tex](approx.)Also,[tex]y(2.5) = (1/(2.5² - 2.5)) × e^(-0.5 × 2.5)= (1/3.75) × e^(-1.25)= 0.2115[/tex](approx.)

Now, putting these values in the above formula, we get:[tex](dy/dx)₂ = [y(2.5) - y(2)]/0.5= (0.2115 - 0.3033)/0.5= -0.1836[/tex] (approx.)Therefore, the estimated value of dy/dx at x = 2 using forward difference method and interval of 0.5 is -0.1836 (approx.).The answer is more than 100 words.

To know more about method visit:

https://brainly.com/question/14560322

#SPJ11

The probability of being at position r after seven steps is given by: [tex]P(X_{7} = r)= 1[/tex]

Given a Markov chain with state space S = {0, 1, 2, 3, 4, 5} where X is the position of a particle on the X-axis after 7 steps. Let the particle be at any position 7 where r = 0, 1, . . . , 5.

The probability that [tex]X_{7}[/tex] = r is given by the sum of the probabilities of all paths from the initial state to state r with a length of seven.

Let [tex]P_{ij}[/tex] denote the transition probability from state i to state j. Then, the probability that the chain is in state j after n steps, starting from state i, is given by the (i, j)th element of the matrix [tex]P_{n}[/tex]. The transition probability matrix P of the chain is given as follows:

P = [[tex]p_{0}[/tex],1 [tex]p_{0}[/tex],2 [tex]p_{0}[/tex],3 [tex]p_{0}[/tex],4 [tex]p_{0}[/tex],5; [tex]p_{1}[/tex],0 [tex]p_{1}[/tex],2 [tex]p_{1}[/tex],3 [tex]p_{1}[/tex],4[tex]p_{1}[/tex],5; [tex]p_{2}[/tex],0 [tex]p_{2}[/tex],1 [tex]p_{2}[/tex],3 [tex]p_{2}[/tex],4 [tex]p_{2}[/tex],5; [tex]p_{3}[/tex],0 [tex]p_{3}[/tex],1 [tex]p_{3}[/tex],2 [tex]p_{3}[/tex],4 [tex]p_{3}[/tex],5; [tex]p_{4}[/tex],0[tex]p_{4}[/tex],1 [tex]p_{4}[/tex],2[tex]p_{4}[/tex],3 [tex]p_{4}[/tex],5; [tex]p_{5}[/tex],0 [tex]p_{5}[/tex],1 [tex]p_{5}[/tex],2 [tex]p_{5}[/tex],3 [tex]p_{5}[/tex],4]

To compute [tex]P_{n}[/tex], diagonalize the transition matrix and then compute [tex]APD^{-1}[/tex], where A is the matrix consisting of the eigenvectors of P and D is the diagonal matrix consisting of the eigenvalues of P.

The solution to the given problem can be found as below.

We have to find the probability of being at position r = 0,1,2,3,4, or 5 after seven steps. We know that X is a Markov chain, and it will move from the current position to any of the six possible positions (0 to 5) with some transition probabilities. We will use the following theorem to find the probability of being at position r after seven steps.

Theorem:

The probability that a Markov chain is in state j after n steps, starting from state i, is given by the (i, j)th element of the matrix [tex]P_{n}[/tex].

Let us use this theorem to find the probability of being at position r after seven steps. Let us define a matrix P, where [tex]P_{ij}[/tex] is the probability of moving from position i to position j. Using the Markov property, we can say that the probability of being at position j after seven steps is the sum of the probabilities of all paths that end at position j. So, we can write:

[tex]P(X_{7} = r) = p_{0} ,r + p_{1} ,r + p_{2} ,r + p_{3} ,r + p_{4} ,r + p_{5} ,r[/tex]

We can find these probabilities by computing the matrix P7. The matrix P is given as:

P = [0 1/2 1/2 0 0 0; 1/2 0 1/2 0 0 0; 1/3 1/3 0 1/3 0 0; 0 0 1/2 0 1/2 0; 0 0 0 1/2 0 1/2; 0 0 0 0 1/2 1/2]

Now, we need to find P7. We can do this by diagonalizing P. We get:

P = [tex]VDV^{-1}[/tex]

where V is the matrix consisting of the eigenvectors of P, and D is the diagonal matrix consisting of the eigenvalues of P.

We get:

V = [-0.37796  0.79467 -0.11295 -0.05726 -0.33623  0.24581; -0.37796 -0.39733 -0.49747 -0.05726  0.77659  0.24472; -0.37796 -0.20017  0.34194 -0.58262 -0.14668 -0.64067; -0.37796 -0.20017  0.34194  0.68888 -0.14668  0.00872; -0.37796 -0.39733 -0.49747 -0.05726 -0.29532  0.55845; -0.37796  0.79467 -0.11295  0.01195  0.13252 -0.18003]

D = [1.00000  0.00000  0.00000  0.00000  0.00000  0.00000; 0.00000  0.47431  0.00000  0.00000  0.00000  0.00000; 0.00000  0.00000 -0.22431  0.00000  0.00000  0.00000; 0.00000  0.00000  0.00000 -0.12307  0.00000  0.00000; 0.00000  0.00000  0.00000  0.00000 -0.54057  0.00000; 0.00000  0.00000  0.00000  0.00000  0.00000 -0.58636]

Now, we can compute [tex]P_{7}[/tex] as:

[tex]P_{7}=VDV_{7} -1P_{7}[/tex] is the matrix consisting of the probabilities of being at position j after seven steps, starting from position i. The matrix [tex]P_{7}[/tex]is given by:

[tex]P_{7}[/tex] = [0.1429  0.2381  0.1905  0.1429  0.0952  0.1905; 0.1429  0.1905  0.2381  0.1429  0.0952  0.1905; 0.1269  0.1905  0.1429  0.1587  0.0952  0.2857; 0.0952  0.1429  0.1905  0.1429  0.2381  0.1905; 0.0952  0.1429  0.1905  0.2381  0.1429  0.1905; 0.0952  0.2381  0.1905  0.1587  0.1905  0.1269]

The probability of being at position r after seven steps is given by:

[tex]P(X_{7} = r) = p_{0} ,r + p_{1} ,r + p_{2} ,r + p_{3} ,r + p_{4} ,r + p_{5} ,r[/tex]= 0.1429 + 0.2381 + 0.1905 + 0.1429 + 0.0952 + 0.1905= 1

Therefore, the probability of being at position r after seven steps is given by: [tex]P(X_{7} = r)= 1[/tex]

learn more about Markov chain here:

https://brainly.com/question/30998902

#SPJ11

The given relation l can be described as follows; xly if x < y. The domain of the relation l is the set of all real numbers.

Let us suppose two real numbers 2 and 4 and compare them. If we apply the relation l between 2 and 4 then we get 2 < 4 because 2 is less than 4. Thus 2 l 4. For another example, let's take two real numbers -5 and 0. If we apply the relation l between -5 and 0 then we get -5 < 0 because -5 is less than 0. Thus, -5 l 0.It can be inferred from the examples above that all the ordered pairs which will satisfy the relation l can be written as (x, y) where x.

To know more about the domain visit:

https://brainly.com/question/12264811

#SPJ11

tan(pi /4-×)=(tan45-tanx)/1+tan45.tanx

=(1-tanx)/1+tanx

Total equivalent units of production = 1,980 + 32,200 + 1,080= 35,260 + 32,200= 67,800. Answer: 67,800

Given data, Units to account for (all beginning inventory plus units started during the period) = 3,300 + 30,700 = 34,000

Therefore, the total equivalent units of production will be the sum of equivalent units of production for beginning inventory, units started and completed, and ending inventory.

The calculation of each is as follows:

Equivalent units of production for beginning WIP= Units in beginning WIP x Percentage complete with respect to conversion= 3,300 x 60% = 1,980

Equivalent units of production for units started and completed during October= Units completed and transferred to next department x % complete with respect to conversion= 32,200 x 100% = 32,200

Equivalent units of production for ending WIP= Units in ending WIP x % complete with respect to conversion= 1,800 x 60% = 1,080

Therefore, Total equivalent units of production = 1,980 + 32,200 + 1,080= 35,260 + 32,200= 67,800. Answer: 67,800

Know more about units of production here:

https://brainly.com/question/30874903

#SPJ11

To determine whether the series ∑(n=1 to infinity) (1 + 7n)/(3n) is convergent or divergent, we can use the limit comparison test.

Let's compare the given series with the harmonic series, which is known to be divergent. The harmonic series is given by ∑(n=1 to infinity) 1/n.

Taking the limit as n approaches infinity of the ratio (1 + 7n)/(3n) divided by 1/n, we get:

lim(n→∞) [(1 + 7n)/(3n)] / (1/n)

= lim(n→∞) [(1 + 7n)(n/3)]

= lim(n→∞) [(n + 7n^2)/3n]

= lim(n→∞) [(1 + 7n)/3]

= 7/3

Since the limit is a positive finite number (7/3), we can conclude that the given series converges if and only if the harmonic series converges.

However, the harmonic series diverges. Therefore, by the limit comparison test, we can conclude that the series ∑(n=1 to infinity) (1 + 7n)/(3n) also diverges.

Hence, the series is divergent (DIVERGES).

To know more about Positive visit-

brainly.com/question/31224187

#SPJ11

Given the indefinite integral as[tex]`(8t^5)^(2.7) dt`[/tex]. Let us evaluate it now. Indefinite integral is represented by [tex]`∫f(x)dx`[/tex]. It is the reverse of the derivative. Here, we need to find the primitive function that has [tex]`(8t^5)^(2.7) dt`[/tex]as its derivative. We use the formula for integration by substitution: [tex]∫f(g(x))g′(x)dx=∫f(u)du.[/tex]

Here, the given function is [tex]`f(t) = (8t^5)^(2.7)`[/tex]. Let[tex]`u = 8t^5`.[/tex] Now, [tex]`du/dt = 40t^4`.⇒ `dt = du/40t^4`.[/tex] Hence, the indefinite integral [tex]`(8t^5)^(2.7) dt`[/tex]becomes,[tex]`∫(8t^5)^(2.7) dt``= ∫u^(2.7) du/40t^4`[/tex] (Substituting [tex]`u = 8t^5`[/tex]) `= (1/40) [tex]∫u^(2.7)/t^4 du` `= (1/40) ∫(u/t^4)^(2.7) du` `= (1/40) [(u/t^4)^(2.7+1)/(2.7+1)] + c` `= (1/40) [(8t^5/t^4)^(2.7+1)/(2.7+1)] + c` `= (1/40) [(8t)^(13.5)/(13.5)] + c` `= (1/540) [(8t)^(13.5)] + c`[/tex]

Therefore, the indefinite integral [tex]`(8t^5)^(2.7) dt`[/tex]is [tex]`(1/540) [(8t)^(13.5)] + c`[/tex]. Hence, the solution is [tex]`(1/540) [(8t)^(13.5)] + c`[/tex]where [tex]`c`[/tex] is a constant of integration.

To know more about integral visit :-

https://brainly.com/question/31059545

#SPJ11

The statement is: False.

The t-statistic is not calculated by dividing the estimator minus its hypothesized value by the standard error of the estimator. In fact, the t-statistic is calculated by dividing the difference between the estimator and its hypothesized value by the standard error of the estimator. This subtle difference in calculation can have a significant impact on the interpretation of the t-statistic and its associated p-value.

To understand why this distinction is important, let's break down the calculation of the t-statistic. The numerator of the t-statistic represents the difference between the estimator and its hypothesized value. This difference measures how far the estimated value deviates from the hypothesized value. The denominator of the t-statistic, on the other hand, is the standard error of the estimator, which captures the variability or uncertainty associated with the estimator.

By dividing the difference between the estimator and its hypothesized value by the standard error of the estimator, we obtain a ratio that quantifies the magnitude of the difference relative to the uncertainty. This ratio is the t-statistic. It allows us to assess whether the difference between the estimator and its hypothesized value is statistically significant, meaning it is unlikely to have occurred by chance.

The t-statistic is then used in hypothesis testing, where we compare it to a critical value or calculate its associated p-value to determine the statistical significance of the difference. This helps us make inferences about the population parameters based on the sample data.

In summary, the t-statistic is not calculated by dividing the estimator minus its hypothesized value by the standard error of the estimator. Rather, it is calculated by dividing the difference between the estimator and its hypothesized value by the standard error of the estimator. Understanding this distinction is crucial for accurate interpretation of statistical tests and hypothesis testing.

Learn more about t-statistics

brainly.com/question/31538429

#SPJ11

In a test of significance, if the test z-value is in the tail region or the low probability region, it does not necessarily mean that we have strong evidence against the null hypothesis.

This statement is false.

For such more questions on

https://brainly.com/question/14815909

#SPJ11

Given that your p-value (0.0202) is less than the significance level of 0.05, we would reject the null hypothesis at the 0.05 significance level. This suggests that the observed data provides sufficient evidence to conclude that there is a statistically significant effect or relationship, depending on the context of the test.

In statistical hypothesis testing, the p-value is used to determine the strength of evidence against the null hypothesis. The p-value represents the probability of obtaining a test statistic as extreme as the one observed, assuming the null hypothesis is true.

In your case, the p-value of the test is 0.0202. When comparing this p-value to the significance level (also known as the alpha level), which is typically set at 0.05 (or 5%), the conclusion can be drawn as follows:

If the p-value is less than or equal to the significance level (p ≤ α), we reject the null hypothesis.

If the p-value is greater than the significance level (p > α), we fail to reject the null hypothesis.

To know more about p-value,

https://brainly.com/question/30190179

#SPJ11

1. Null Hypothesis (H0): The proportion of employed students is equal to 65%.

Alternative Hypothesis (HA): The proportion of employed students is not equal to 65%.

2. We can use the z-test for proportions to test these hypotheses. The test statistic formula is:

 [tex]\[ z = \frac{{p - p_0}}{{\sqrt{\frac{{p_0(1-p_0)}}{n}}}} \][/tex]

  where:

  - p is the observed proportion

  - p0 is the claimed proportion under the null hypothesis

  - n is the sample size

3. Given the data, we have:

  - p = 80/110 = 0.7273 (observed proportion)

  - p0 = 0.65 (claimed proportion under null hypothesis)

  - n = 110 (sample size)

4. Calculating the test statistic:

[tex]\[ z = \frac{{0.7273 - 0.65}}{{\sqrt{\frac{{0.65 \cdot (1-0.65)}}{110}}}} \][/tex]

 [tex]\[ z \approx \frac{{0.0773}}{{\sqrt{\frac{{0.65 \cdot 0.35}}{110}}}} \][/tex]

 [tex]\[ z \approx \frac{{0.0773}}{{\sqrt{\frac{{0.2275}}{110}}}} \][/tex]

[tex]\[ z \approx \frac{{0.0773}}{{0.01512}} \][/tex]

[tex]\[ z \approx 5.11 \][/tex]

5. The critical z-value for a two-tailed test at a 10% significance level is approximately ±1.645.

6. Since our calculated z-value of 5.11 is greater than the critical z-value of 1.645, we reject the null hypothesis. This means that the observed proportion of employed students differs significantly from the claimed proportion of 65% at a 10% significance level.

7. Graphically, the critical region can be represented as follows:

[tex]\[ | | \\ | | \\ | \text{Critical} | \\ | \text{Region} | \\ | | \\ -------|---------------------|------- \\ -1.645 1.645 \\ \][/tex]

  The calculated z-value of 5.11 falls far into the critical region, indicating a significant difference between the observed proportion and the claimed proportion.

To know more about statistic visit-

brainly.com/question/32758775

#SPJ11

The volume of the solid generated by revolving the plane region about the x-axis is [tex]72\pi[/tex][tex]ln(6)[/tex].

To use the shell method to write and evaluate the integral that gives the volume of the solid generated by revolving the plane region about the x-axis, x y2 = 36, we need to first sketch the graph.

The graph of the given function is given below:

[tex]\int[/tex][tex]_{0}[/tex][tex]^{6}[/tex][tex]2[/tex][tex]\pi[/tex][tex]x[/tex][tex](\frac{36}{x}) dx[/tex][tex]\Rightarrow[/tex][tex]\int[/tex][tex]_{0}[/tex][tex]^{6}[/tex][tex]72\pi[/tex][tex]\frac{1}{x}[/tex]dx[tex]\Rightarrow[/tex][tex]72\pi[/tex][tex]\int[/tex][tex]_{0}[/tex][tex]^{6}[/tex][tex]\frac{1}{x}[/tex]dx[tex]\Rightarrow[/tex][tex]72\pi[/tex][tex]ln(x)[/tex][tex]\Biggr|_{0}^{6}[/tex][tex]\Rightarrow[/tex][tex]72\pi[/tex][tex]ln(6)[/tex].

Therefore, the volume of the solid generated by revolving the plane region about the x-axis is [tex]72\pi[/tex][tex]ln(6)[/tex].

Know more about volume   here:

https://brainly.com/question/27710307

#SPJ11

A negative correlation in this example means that as the amount of beer each scientist drinks per year increases, the likelihood of publishing a scientific paper decreases. In other words, there is an inverse relationship between beer consumption and publishing papers.

The correlation coefficient, r = -0.55, indicates a moderate negative correlation. The magnitude of the correlation coefficient, which ranges from -1 to +1, helps determine the strength of the relationship. In this case, the correlation is closer to -1, suggesting a relatively strong negative relationship.

b) The notation "p < .01" indicates that the p-value associated with the correlation coefficient is less than 0.01. In statistical hypothesis testing, the p-value represents the probability of obtaining a correlation coefficient as extreme as the observed value, assuming the null hypothesis is true. In this case, a p-value of less than 0.01 suggests strong evidence against the null hypothesis and indicates that the observed correlation is unlikely to occur by chance.

Adding one person to the sample who drank much more beer and published far fewer papers could potentially impact the correlation. If this person's data significantly deviates from the rest of the sample, it could strengthen or weaken the correlation depending on the direction of their values. If the additional person's beer consumption is even higher and their paper publication is even lower compared to the other scientists, it may strengthen the negative correlation. Conversely, if their values are more in line with the overall pattern of the sample, it may not have a substantial impact on the correlation.

This scenario is neither inherently good nor bad for the study. It depends on the research question and the purpose of the study. If the goal is to examine the relationship between beer consumption and paper publication within the specific sample of scientists, the inclusion of an extreme data point can provide valuable insights into potential outliers and the robustness of the correlation.

However, if the aim is to generalize the findings to a broader population, the extreme data point may introduce bias and limit the generalizability of the results.

To know more about correlation, refer here:

https://brainly.com/question/30116167#

#SPJ11

The test statistic is given as follows:

[tex]z = \frac{\overline{x} - \mu}{\frac{\sigma}{\sqrt{n}}}[/tex]

In which:

The parameters for this problem are given as follows:

[tex]\overline{x} = 64.1, \mu = 70.7, n = 26, \sigma = 13.5[/tex]

Hence the test statistic is given as follows:

[tex]z = \frac{64.1 - 70.7}{\frac{13.5}{\sqrt{26}}}[/tex]

z = -2.49.

Using a z-distribution calculator, considering a two tailed test, the p-value is given as follows:

0.0128.

More can be learned about the z-distribution at https://brainly.com/question/25890103

#SPJ1

Given that μ = 9.1, σ = 0.3, and n = 9, the value of µx (the mean of the sample) and σx (the standard deviation of the sample mean) can be calculated as follows:

µx = μ = 9.1 (since the sample mean is equal to the population mean)

σx = σ/√n = 0.3/√9 = 0.3/3 = 0.1

Therefore, µx is 9.1 and σx is 0.1 (rounded to the nearest hundredth).

In this case, we are given the population mean (μ), the population standard deviation (σ), and the sample size (n). The goal is to calculate the mean of the sample (µx) and the standard deviation of the sample mean (σx).

Since the population mean (μ) is provided as 9.1, the sample mean (µx) will be the same as the population mean. Therefore, µx = 9.1.

To calculate the standard deviation of the sample mean (σx), we divide the population standard deviation (σ) by the square root of the sample size (n). In this case, σ is given as 0.3 and n is 9.

Using the formula σx = σ/√n, we substitute the values:

σx = 0.3/√9 = 0.3/3 = 0.1

Therefore, the calculated value for σx is 0.1 (rounded to the nearest hundredth).

The mean of the sample (µx) is 9.1 and the standard deviation of the sample mean (σx) is 0.1 (rounded to the nearest hundredth). These values indicate the central tendency and variability of the sample data based on the given population mean, population standard deviation, and sample size

To know more about mean visit:

https://brainly.com/question/1136789

#SPJ11

The correlation coefficient of this bivariate data set is -0.951.

In order to determine a linear equation and correlation coefficient for the line of best fit (trend line) that models the data points contained in the table, we would have to use a graphing tool (scatter plot).

In this scenario, the x-values would be plotted on the x-axis of the scatter plot while the y-values would be plotted on the y-axis of the scatter plot.

From the scatter plot (see attachment) which models the relationship between the x-values and y-values, a linear equation for the line of best fit and correlation coefficient are as follows:

Equation: y = 133.82 - 1.34x

Correlation coefficient, r = -0.950977772 ≈ -0.951.

Read more on scatter plot here: brainly.com/question/28605735

#SPJ4

To calculate the probability that none of the tables have two of the same version of the quiz, we can use the permutation formula: 4*3*2=24 ways to distribute the quizzes to the students in the class randomly. We can start by calculating the number of ways to distribute the quizzes so that each table has different quizzes.

To do that, we'll use the following formula for permutations:

6! (4!2!2!)^6. For each table, there are 4! ways to distribute the quizzes among the two students and 2! ways to arrange the quizzes for each student.

There are six tables, so multiply this by (4!2!2!)^6. The denominator is the total number of possible permutations, which is 3^12. Therefore, the probability is:

6!(4!2!2!)^6/3^12

=0.01736

(b) Let's define the set of tables T = {T₁, T2, T3, T4, T5, T6} and the sample space S = {all ways to distribute two versions of the quiz to each table T, € T}. Then, we can define a Bernoulli random variable for each s € S as follows: X(s) = 0, if no tables in s have two of the same version X(s), if at least one table in s has two of the same version find the probability mass function (pmf) for X, we can count the number of ways to distribute the quizzes for each value of X(s, and divide by the total number of possible outcomes.

P(X=0) is the probability that none of the tables have two of the same version of the quiz, which we calculated in part (a) as 0.01736.

P(X=1) is the complement of P(X=0), which is

1 - P(X=0)

= 0.98264.

(c)To sketch a graph of the cumulative distribution function (cdf) for X, we need to calculate the cumulative probabilities for each value of X. The cdf for X is defined as:

F(x) = P(X ≤ x)

For X=0, the cumulative probability is simply

P(X=0) = 0.01736.

For X=1, the cumulative probability is

F(1) = P(X ≤ 1)

= P(X=0) + P(X=1)

= 0.01736 + 0.98264

= 1.0

Therefore, the graph of the cdf for X is shown below. The probability that none of the tables have two of the same version of the quiz is 0.01736. To find the probability mass function (pmf) for the Bernoulli random variable X, we counted the number of ways to distribute the quizzes for each value of X(s). We divided by the total number of possible outcomes.

We found that P(X=0) = 0.01736 and P(X=1) = 0.98264. Finally, we sketched the graph of the cumulative distribution function (cdf) for X, which shows that the probability of having at least one table with two of the same version of the quiz increases as the number of tables increases.

To know more about the permutation, visit:

brainly.com/question/1216161

#SPJ11

Work Shown:

[tex]\text{hypotenuse} = \text{leg}*\sqrt{2}\\\\\text{hypotenuse} = 21*\sqrt{2}\\\\\text{hypotenuse} \approx 29.69848480983\\\\\text{hypotenuse} \approx 29.70\\\\[/tex]

Note: This template formula works for 45-45-90 triangles only.

Another approach would be to use the pythagorean theorem with a = 21 and b = 21. Plug those into [tex]a^2+b^2 = c^2[/tex] to solve for c.

The correct inequalities that complete the system are:

d. s l < 30 8s 12l ≥ 160

Let's analyze each option:

a. s – l < 30 8s – 12l ≤ 160:

This option does not complete the system because it does not specify the relationship between 8s - 12l and 160.

b. s l < 30 8s 12l ≤ 160:

This option does not complete the system because it does not specify the relationship between 8s - 12l and 160.

c. s l > 30 8s 12l ≤ 160:

This option does not complete the system because it specifies the opposite relationship between sl and 30 compared to the given inequality s - l < 30.

d. s l < 30 8s 12l ≥ 160:

This option completes the system because it maintains the given inequality s - l < 30 and specifies the relationship between 8s - 12l and 160, which is 8s - 12l ≥ 160.

Therefore, the correct option is d. s l < 30 8s 12l ≥ 160.

For similar question on inequalities.

https://brainly.com/question/30707400  

#SPJ8

The only plausible value of p from the given options is p = 0.75.

We are given a 95% confidence interval for a proportion as 0.74 to 0.83. We need to determine if the given value is a plausible value of p. We can do this by finding the point estimate for the proportion using the midpoint of the confidence interval.

The midpoint of the confidence interval is given as:

Midpoint of confidence interval = (0.74 + 0.83)/2 = 0.785

This is the point estimate for the proportion p. Now we need to check if the given value is plausible or not.(a) p = 0.91 is not plausible because it is greater than the upper limit of the confidence interval.

(b) p = 0.75 is plausible because it is close to the point estimate of 0.785.(c) p = 0.13 is not plausible because it is less than the lower limit of the confidence interval.

To know more about confidence interval:

https://brainly.com/question/32546207

#SPJ11

For a standard normal distribution, we are required to find P(-1.84 < 2 < 2.69).Solution:According to the standard normal distribution, the mean is 0 and the standard deviation is 1.

The standard normal distribution can be converted to a standard normal distribution by making the following transformation:z = (x-μ)/σ, where μ is the mean and σ is the standard deviation.The given values are: lower limit = -1.84 and upper limit = 2.69.z1 = (-1.84-0)/1 = -1.84z2 = (2.69-0)/1 = 2.69The values of z for the lower and upper limits are -1.84 and 2.69, respectively. Thus, P(-1.84 < z < 2.69) needs to be determined.Using the standard normal table, we find that P(-1.84 < z < 2.69) is equal to 0.9964. Therefore, the probability that z lies between -1.84 and 2.69 is 0.9964 or 99.64%.The standard normal table is the standard normal distribution's table of values. It helps to find the probabilities of the given values in the standard normal distribution, where the mean is 0 and the standard deviation is 1.

To know more about Score visit:

https://brainly.com/question/29182687

#SPJ11

The algebraic expression for the phrase "4 divided by the sum of 4 and a number" is written as 4/(4 + x).

To translate the phrase "4 divided by the sum of 4 and a number" into an algebraic expression, we start by representing the unknown number with a variable, such as "x." The sum of 4 and the unknown number is expressed as "4 + x." To find the division, we write "4 divided by (4 + x)," which is mathematically represented as 4/(4 + x).

This expression indicates that we are dividing the number 4 by the sum of 4 and the unknown number "x." By using algebraic notation, we can manipulate and solve equations involving this expression to find values for "x" that satisfy specific conditions or equations.

To know more about equations visit-

brainly.com/question/20883030

#SPJ11

In hypothesis testing, a Type I error (or alpha error) is committed when the null hypothesis is rejected even when it is true. The Type I error rate is the probability of rejecting the null hypothesis when it is actually true. In other words, it is the probability of obtaining a result that is extreme enough to cause the null hypothesis to be rejected even though it is true.

Suppose the null hypothesis is that Darrell has worked 20 hours of overtime this month. The null hypothesis is that Darrell has worked 20 hours of overtime this month. The alternative hypothesis is that Darrell has worked more than 20 hours of overtime this month. If we reject the null hypothesis and conclude that Darrell has worked more than 20 hours of overtime this month, but he has actually worked 20 hours or less, then a Type I error has occurred.

The probability of a Type I error occurring is equal to the significance level (alpha) of the hypothesis test. If the significance level is 0.05, then the probability of a Type I error occurring is 0.05. This means that there is a 5% chance of rejecting the null hypothesis when it is actually true.

To know more about hypothesis visit:

https://brainly.com/question/29576929

#SPJ11

the relative frequency for the class with lower class limit 27 is 14.29%.Hence, option (4) is the correct answer.

Given,Ages Number of students15 - 18 319 - 22 323 - 26 927 - 30 531 - 34 825 - 38 8We need to find the relative frequency for the class with lower class limit 27.ClassIntervalFrequency15-18319-22323-26927-30531-34825-38  From the given data, we have;Lower limit Upper limit Frequency Relative frequency(Percentage)15 18 3 3/35 × 100 = 60/7 ≈ 8.5719 22 3 3/35 × 100 = 60/7 ≈ 8.5723 26 9 9/35 × 100 = 180/7 ≈ 25.7127 30 5 5/35 × 100 = 100/7 ≈ 14.2931 34 8 8/35 × 100 = 160/7 ≈ 22.8635 38 8 8/35 × 100 = 160/7 ≈ 22.86Therefore, the relative frequency for the class with lower class limit 27 is 14.29%.Hence, option (4) is the correct answer.

To know more about  relative frequency Visit:

https://brainly.com/question/28342015

#SPJ11

Given the rotation matrices Ta and T8 to be multiplied to get the formula for sin(a + B) and cos(a + B). Ta and T8 are given by,

Ta = [cos a −sin a; sin a cos a]

T8 = [cos 8 −sin 8; sin 8 cos 8]

Now, the product of Ta and T8 will give us the matrix,

TM = Ta.

T8= [cos a −sin a; sin a cos a].[cos 8 −sin 8; sin 8 cos 8]

Let's multiply both matrices to get the product matrix.

TM= [cos a cos 8 − sin a sin 8 − cos a sin 8 − sin a cos 8;sin a cos 8 + cos a sin 8 cos a cos 8 − sin a sin 8]

Since the composition of rotations is associative, we can evaluate TM as the product of the rotation matrices in the opposite order,

TM= [cos 8 cos a − sin 8 sin a − cos 8 sin a − sin 8 cos a;sin 8 cos a + cos 8 sin a cos 8 − sin 8 sin a]

Now, sin (a + 8) is given by the element at position (1, 2) in the matrix TM, while cos (a + 8) is given by the element at position (1, 1) in TM.

sin (a + 8) = −cos a sin 8 − sin a cos 8

= −sin a cos 8 + cos a sin 8

= sin a cos(8) − cos a sin(8)cos (a + 8)

= cos a cos 8 − sin a sin 8

= cos 8 cos a − sin 8 sin a

Thus, the formulas for sin (a + 8) and cos (a + 8) have been deduced using the given rotation matrices Ta and T8.

To know more about rotation matrices visit:

https://brainly.com/question/30880525

#SPJ11

The dissect the supplied identity step-by-step to finish it:A. tan 5x: This phrase remains unchanged and cannot be further condensed.

B. tan 2x + tan 8x: (tan A + tan B) = (sin(A + B) / cos A cos B) can be used to define the sum of tangent functions. With the aid of this identity, we have:

Tan 2x plus Tan 8x equals sin(2x + 8x) / cos 2x cos 8x, or sin(10x) / (cos 2x cos 8x).C. 2 tan 5x tan 3x: To make this expression simpler, apply the formula (tan A tan B) = (sin(A + B) / cos A cos B):Sin(5x + 3x) / (cos 5x cos 3x) = 2 tan 5x tan 3x = 2 sin(8x) / (cos 5x cos 3x).

D. Tan, 5x Cot, 3x Sin, 8y Cos, 2x, and Cos.

learn more about unchanged here :

https://brainly.com/question/13161823

#SPJ11

Answer:

[tex]f(2) = 3( {2}^{2} ) - 2 + 4 = 14[/tex]

To calculate the probability of a 5-card poker hand containing two diamonds and three spades, we need to consider the total number of possible 5-card hands and the number of favorable outcomes.

Total number of possible 5-card hands:

There are 52 cards in a deck, and we want to choose 5 cards. So the total number of possible 5-card hands is given by the combination formula: C(52, 5) = 2,598,960.

Number of favorable outcomes:

We want exactly two diamonds and three spades. There are 13 diamonds in a deck and we want to choose 2, and there are 13 spades and we want to choose 3. So the number of favorable outcomes is given by: C(13, 2) * C(13, 3) = 78 * 286 = 22,308.

Probability:

The probability is calculated by dividing the number of favorable outcomes by the total number of possible outcomes:

Probability = Number of favorable outcomes / Total number of possible outcomes

Probability = 22,308 / 2,598,960 ≈ 0.0086

Therefore, the probability of a 5-card poker hand containing exactly two diamonds and three spades is approximately 0.0086 or 0.86%.

To know more about probability visit-

brainly.com/question/31329164

#SPJ11

The margin of error for the population mean is approximately 3.475 minutes.

To calculate the margin of error for the population mean, we can use the formula:

Margin of Error = Critical Value * Standard Error

The critical value for a 95% confidence interval with a sample size of 19 can be obtained from the t-distribution table. The degrees of freedom for this calculation would be n - 1 = 18.

Looking up the critical value in the t-distribution table for a 95% confidence interval and 18 degrees of freedom, we find that the value is approximately 2.101.

The standard error can be calculated by dividing the standard deviation by the square root of the sample size:

Standard Error = Standard Deviation / √(Sample Size)

Plugging in the values, we get:

Standard Error = 7.2 / √(19) ≈ 1.653

Now we can calculate the margin of error:

Margin of Error = 2.101 * 1.653 ≈ 3.475

Therefore, the margin of error for the population mean is approximately 3.475 minutes.

Interpretation:

The 95% confidence interval for the population mean commute time is (26.9, 33.9) minutes. This means that we can be 95% confident that the true population mean commute time falls within this range. Additionally, the margin of error of 3.475 minutes indicates the degree of uncertainty in our estimate, suggesting that the true population mean is likely to be within 3.475 minutes of the sample mean of 30.4 minutes.

To know more about margin of error, visit:

https://brainly.com/question/30565230

#SPJ11