The direction of the principal strains is 15.5° from the x-axis. The magnitudes of the principal strains are -154.5 μ and -165.5 μ.
The expressions for the principal strains in terms of εx, εy, and γxy are given below: E1,2 = [(εx + εy) / 2] ± [(εx - εy)2 / 4 + γxy2]1/2. Thus, substituting the given values into the formula:
E1,2 = [(-260 - 60) / 2] ± [(-260 + 60)2 / 4 + 5202]1/2
= [-320/2] ± [49000]1/2
= -160 ± 221.4 μ.
Now, to determine the direction of the principal strain (measured from the x-axis), we use the following equation:
tan 2Ө = 2γxy / (εx - εy)
tan 2Ө = 2(520) / (-260 - (-60))
= 15.5°.
The magnitudes of the principal strains are given by: Ea = 154.5 μ and Eb = 165.5 μ. Maximum in-plane shearing strain. The in-plane shearing strain is given by the following equation:
u = [(εx - εy)2 + 4γxy2]1/2 / 2u
= [(260 - 60)2 + 4(520)2]1/2 / 2
= 301 μ
The maximum in-plane shearing strain is 301, rounded to the nearest whole number.
The maximum shearing strain is equal to half the difference between the principal strains:
M = (Eb - Ea) / 2
= (165.5 - 154.5) / 2
= 5, rounded to the nearest whole number.
Learn more about shearing strain here:
https://brainly.com/question/13390432
#SPJ11
680 J of heat are added to 56g of water initially at 20°
C.
1. How much energy is this in calories?
2. what is the final temperature of the water? ( In C°)
When 680 J of heat is added to 56g of water initially at 20°C, the energy is approximately 162.76 calories, and the final temperature of the water is approximately 23.25°C.
The energy in calories, we can use the conversion factor: 1 calorie (cal) = 4.184 J (joules). Therefore, the energy added to the water is:
680 J * (1 cal / 4.184 J) ≈ 162.76 cal.
To determine the final temperature of the water, we need to consider the specific heat capacity of water. The specific heat capacity of water is approximately 4.18 J/g°C. We can use the equation:
q = m * c * ΔT,
where q is the heat energy, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
Rearranging the equation to solve for ΔT:
ΔT = q / (m * c),
ΔT = 680 J / (56g * 4.18 J/g°C),
ΔT ≈ 3.25°C.
Since the water started at 20°C, the final temperature can be found by adding the change in temperature to the initial temperature:
Final temperature = 20°C + 3.25°C ≈ 23.25°C.
Therefore, the final temperature of the water after adding 680 J of heat will be approximately 23.25°C.
To know more about final temperature refer here:
https://brainly.com/question/11593639#
#SPJ11
An object is placed 14.5 cm in front of a convex mirror that has a focal length of -23.5 cm. Determine the location of the image. (Denote virtual images with negative distances.) What is the magnification of the object discussed above?
An object is placed 14.5 cm in front of a convex mirror that has a focal length of -23.5 cm have the magnification of the object is 0.87.
Determine the location of the image. (Denote virtual images with negative distances.)
Given,f = -23.5 cmu = -14.5 cmv = ?Magnification (m) = ?
Formula Used:The mirror formula is given by1/v + 1/u = 1/fWhere,u = object distancev = image distancef = focal lengthIf v is positive, the image is a real image. If v is negative, the image is a virtual image. If m is positive, the image is upright, and if m is negative, the image is inverted.
Calculation:1/v + 1/u = 1/f1/v + 1/(-14.5) = 1/(-23.5)1/v = 1/(-23.5) + 1/14.5v = -12.65 cm
Since the value of v is negative, it is a virtual image.
Magnification (m) = -v/u = -(-12.65)/(-14.5) = 0.87
The magnification of the object discussed above is 0.87.
To learn more about convex visit;
https://brainly.com/question/30340321
#SPJ11
suppose a(t) = 2 and s(t) represent the acceleration, velocity and distance from the starting point of an object. distance is meas red in meters and time is measured in seconds.
The velocity function is v(t) = 2t + C and the distance function is s(t) = t² + Ct + D.
The acceleration is given as a(t) = 2 and we know that acceleration is the derivative of velocity, i.e., a(t) = v'(t). Integrating this equation gives v(t) = 2t + C where C is the constant of integration. The distance function is the anti-derivative of the velocity function, i.e., s(t) = ∫v(t) dt. Integrating v(t) gives s(t) = t² + Ct + D where C and D are the constants of integration.
Using the initial condition that the object starts from the origin, we get s(0) = 0. Therefore, D = 0. Using the velocity function, we have v(0) = C = 0. Hence, the velocity function is v(t) = 2t and the distance function is s(t) = t². Thus, the object's velocity and distance from the starting point at any given time t can be determined.
Learn more about acceleration here:
https://brainly.com/question/1581406
#SPJ11
A charged particle moves with velocity v in a uniform magnetic field B. The magnetic force experienced by the particle is ___________.
A. Always zero
B. Zero if B and V are perpendicular
C. Zero if Band V are parallel
D. Zero if B and V are inclined at 45 degree
A charged particle moves with velocity v in a uniform magnetic field B. The magnetic force experienced by the particle is Zero if B and V are perpendicular.
The formula for magnetic force is:F = q(v×B)Where:F is the magnetic force (in Newtons),q is the charge on the particle (in Coulombs),v is the velocity of the particle (in meters per second), B is the magnetic field strength (in Tesla), and× is the vector product.
A charged particle moves with velocity v in a uniform magnetic field B. The magnetic force experienced by the particle is Zero if B and V are perpendicular. A magnetic field is a force field that surrounds magnets, moving electric charges, and current-carrying wires. The magnetic force on a charged particle is proportional to the magnetic field strength, particle velocity, and the sine of the angle between the particle velocity and the magnetic field.If the velocity of a charged particle is parallel to the magnetic field, there will be no magnetic force on it. The magnetic force on a charged particle moving in a magnetic field is always perpendicular to both the magnetic field and the particle's velocity. The formula for magnetic force is:F = q(v×B)Where:F is the magnetic force (in Newtons),q is the charge on the particle (in Coulombs),v is the velocity of the particle (in meters per second),B is the magnetic field strength (in Tesla), and× is the vector product.
To know more about magnetic force visit :
brainly.com/question/10353944
#SPJ11
determine the value of ti , the rst instant in time when y(t) is non-zero.
The value of ti, the first instant in time when y(t) is non-zero, can be determined by analyzing the function or system that describes the behavior of y(t).
This could involve solving an equation, evaluating a condition, or examining a given set of data. To determine ti, you need to identify the specific equation or context related to y(t). If y(t) is represented by a mathematical function, you would need to solve the equation or set it equal to zero and find the roots or intersections. The resulting value(s) of t would correspond to the times when y(t) is non-zero.
In cases where y(t) is defined by a system or data, you would need to examine the relevant conditions or values to identify when y(t) first becomes non-zero. This could involve observing the behavior of the system or analyzing the given data points.
In summary, determining the value of ti requires analyzing the specific equation, system, or data associated with y(t) to identify when it first deviates from zero.
To know more about time, click here:
https://brainly.com/question/31773883
#SPJ11
A 2000 Hz sound wave passes through a wall with two narrow openings 30 cm apart. If sound travels on average 334 m/s, find the following. (a) What is the angle of the first order maximum? ° (b) Find the slit separation when you replace the sound wave with a 2.25 cm microwave, and the angle of the first order maximum remains unchanged. m (c) If the slit separation is 1.00 µm, what frequency of light gives the same first order maximum angle? Hz
We have f = v/λ = 3 × 10⁸ / (1 × 10⁻⁶) = 3 × 10¹⁴ Hz (c)The frequency of light that gives the same first order maximum angle is 3 × 10¹⁴ Hz.
Given,Speed of sound, v = 334 m/sFrequency of sound wave, f = 2000 HzDistance between the two narrow openings, d = 30 cm = 0.3 Let us calculate the angle of the first order maximum angle of the sound wave. The formula used to find the angle of the first order maximum is given by sinθ = λ/d Where λ is the wavelength of the wave.We know that the velocity of sound wave, v = fλ⇒ λ = v/f = 334/2000 = 0.167 m
Using the above values in the formula, we have sinθ = λ/d⇒ θ = sin⁻¹(λ/d) = sin⁻¹(0.167/0.3) = 31.87° (a)The angle of the first order maximum is 31.87°.Now, we need to find the slit separation when we replace the sound wave with a 2.25 cm microwave, and the angle of the first order maximum remains unchanged.The formula used to find the slit separation is given by d = λ/ sinθLet λ1 be the wavelength of the microwave after replacing the sound wave.
We know that the angle of the first order maximum remains unchanged. Therefore,d/sinθ = d1/sinθ1⇒ d1 = d(sinθ1/sinθ)Let λ1 = 2.25 cm = 0.0225 m.Using the above values, we have d = λ/ sinθ⇒ d1 = d(sinθ1/sinθ) = (0.167/ sin31.87°) (sin31.87°) / (0.0225) = 4.67 m (b)The slit separation is 4.67 m.Now, we need to calculate the frequency of light that gives the same first order maximum angle. The formula used to calculate the frequency of light is given by f = v/λWe know that the wavelength of light = 1.00 µm = 1 × 10⁻⁶ m.
Using the above values, we have f = v/λ = 3 × 10⁸ / (1 × 10⁻⁶) = 3 × 10¹⁴ Hz (c)The frequency of light that gives the same first order maximum angle is 3 × 10¹⁴ Hz.
To learn more about frequency visit;
https://brainly.com/question/31992754
#SPJ11
If the momentum of an electron were doubled, how would its wavelength change? a. No change. b. It would be halved. c. It would double. d. It would be quadrupled. e. It would be reduced to one-fourth.
Therefore, if the momentum of an electron were doubled, its wavelength would be reduced to one-half. (b) It would be halved.
The wavelength of an electron is inversely proportional to its momentum. The equation for the relationship between momentum, wavelength, and Planck's constant (h) is p = h/λ, where p is the momentum of the particle and λ is its wavelength.
If the momentum of an electron is doubled, its de Broglie wavelength is halved. The momentum of an electron is inversely proportional to its de Broglie wavelength, as described by de Broglie's hypothesis: λ = h/p = h/(mv).If the momentum of an electron is doubled, the electron's mass and velocity remain unchanged. As a result, the electron's de Broglie wavelength must be halved, since the momentum term (mv) in the denominator of the equation for de Broglie wavelength increases while h remains constant.
Thus, if the momentum of an electron were doubled, its wavelength would be reduced to one-half.
Therefore, option (b) is the correct answer, it would be halved.
To know more about momentum visit:
https://brainly.com/question/30677308
#SPJ11
Imagine you are boiling water in a pot on the stove.Between the time when the water first boils and the time when it is completely vaporized,how does the temperature of the water change? O no change O negative change O positive change O It depends on the thermodynamic process involved.
The temperature of the water remains constant during the phase transition from boiling to vaporization.
When water reaches its boiling point, it undergoes a phase transition from a liquid to a gas (water vapor). During this phase transition, the heat energy supplied to the water is primarily used to break the intermolecular bonds holding the water molecules together, rather than increasing the temperature.
The temperature of the water remains constant at its boiling point until all the liquid water has converted into water vapor. This is because the added heat energy is being used to overcome the intermolecular forces rather than increasing the average kinetic energy of the water molecules, which would result in a rise in temperature.
Once all the water has vaporized, further addition of heat energy will increase the temperature of the water vapor.
The temperature of the water remains constant during the phase transition from boiling to vaporization. It does not show a positive or negative change during this process.
To know more about vaporization, visit:
https://brainly.com/question/17653778
#SPJ11
A customer enters a grocery store with an empty shopping cart that has a mass of 20 kg. Another customer is leaving the store with a shopping cart full of groceries that has a mass of 40 kg. The two customers accidentally bump their carts together. Eve observes the accident. She hypothesizes that the cart full of groceries applied more force to the empty cart than the empty cart applied to the full cart. Explain whether you agree or disagree with Eve’s hypothesis. Use Newton’s third law of motion to support your answer. Input Field 1 of 1
I agree with Eve's hypothesis that the cart full of groceries applied more force to the empty cart than the empty cart applied to the full cart. This can be explained by Newton's third law of motion, which states that for every action, there is an equal and opposite reaction.
When the two carts collide, they exert equal and opposite forces on each other. The force exerted by the full cart on the empty cart is equal in magnitude but opposite in direction to the force exerted by the empty cart on the full cart. According to Newton's third law, these forces are a pair of action-reaction forces.
The force experienced by an object can be calculated using the equation F = m * a, where F is the force, m is the mass of the object, and a is the acceleration. Since the masses of the two carts are different (20 kg for the empty cart and 40 kg for the full cart), the force experienced by each cart will be different if the acceleration is the same.
Given that the carts collide, it is reasonable to assume that they experience the same acceleration in the opposite directions. Therefore, the force experienced by the empty cart will be smaller than the force experienced by the full cart. This is because the force is directly proportional to the mass according to Newton's second law (F = m * a).
In conclusion, according to Newton's third law of motion, the cart full of groceries applied more force to the empty cart than the empty cart applied to the full cart. The difference in mass between the two carts results in a difference in the forces they exert on each other during the collision.
For more such information on: law of motion
https://brainly.com/question/26083484
#SPJ8
the double gear rolls on the stationary lower rack: the velocity of its center is 1.2 m/s.
The velocity of the center of a double-gear rolling on a stationary lower rack is 1.2 m/s.
To understand this scenario, it is important to have a clear idea of the concept of gear rolling. In the case of gear rolling, the gear rotates around its center while it also translates along its axis. When the gears roll, the angular velocity and the linear velocity are related in a specific way.
In this case, we know that the velocity of the center of the double gear is 1.2 m/s. We can use this information along with the radius of the double gear to calculate the angular velocity. The angular velocity is given by the formula:ω = v/rwhereω is the angular velocity v is the linear velocity r is the radius.
Substituting the values given, we get: ω = 1.2/r r is not given, so we cannot find the exact value of ω. However, we know that the angular velocity of the double gear is directly proportional to the linear velocity of its center. This means that if the velocity of the center of the double gear increases, the angular velocity will also increase.
Learn more about angular velocity here:
https://brainly.com/question/31501255
#SPJ11
Complete question is:
The double gear rolls on the stationary lower rack; the velocity of its center is 1.2 m/s, determine the angular velocity
of the gear?
Explain the differences between environmental capital and economic growth.
Environmental capital is all natural resources that are used to produce goods and services. Economic growth is an increase in the amount of goods and services produced. While economic growth and environmental capital both contribute to human well-being, they do so in very different ways.
The differences between environmental capital and economic growth are discussed below:
Environmental capital: Environmental capital refers to natural resources that are used to produce goods and services. It includes renewable resources, such as timber, fish, and water, as well as nonrenewable resources, such as coal and oil. The quality and quantity of environmental capital can have a significant impact on human well-being. For example, healthy ecosystems can provide many benefits, such as clean air and water, while degraded ecosystems can lead to a decline in human health and well-being.
Economic growth: Economic growth refers to an increase in the amount of goods and services produced. It is usually measured in terms of Gross Domestic Product (GDP), which is the total value of all goods and services produced in a country during a specific period. Economic growth can provide many benefits, such as increased employment, higher wages, and improved living standards. However, it can also lead to negative impacts, such as environmental degradation and social inequality.
Learn more about Economic growth at
brainly.com/question/29621837
#SPJ11
what linear speed must an earth satellite have to be in a circular orbit at an altitude of 232 km above earth's surface? (b) what is the period of revolution
The satellite must have a linear speed of approximately 7,665 m/s to be in a circular orbit at an altitude of 232 km above the Earth's surface. The period of revolution of the satellite is approximately 5,289 seconds.
a) To calculate the linear speed required for an Earth satellite to be in a circular orbit at a given altitude, we can use the formula:
[tex]\[v = \sqrt{\frac{{GM}}{{r}}}\][/tex]
where:
[tex]\(v\)[/tex] is the linear speed,
[tex]\(G\)[/tex] is the gravitational constant [tex](\(6.67430 \times 10^{-11}\, \text{{m}}^3/\text{{kg}}/\text{{s}}^2\))[/tex],
[tex]\(M\)[/tex] is the mass of the Earth [tex](\(5.97219 \times 10^{24}\, \text{{kg}}\))[/tex],
[tex]\(r\)[/tex] is the distance from the center of the Earth to the satellite (altitude + radius of the Earth).
Given:
Altitude [tex](\(h\)) = 232 km (\(232 \times 10^3\, \text{{m}}\))[/tex]
Radius of the Earth [tex](\(R\)) = 6,371 km (\(6,371 \times 10^3\, \text{{m}}\))[/tex]
Calculating the distance from the center of the Earth to the satellite:
[tex]\(r = R + h\)[/tex]
Substituting the values into the formula:
[tex]\[r = (6,371 \times 10^3\, \text{{m}}) + (232 \times 10^3\, \text{{m}}) \\\\= 6,603 \times 10^3\, \text{{m}}\][/tex]
[tex]\[v = \sqrt{\frac{{(6.67430 \times 10^{-11}\, \text{{m}}^3/\text{{kg}}/\text{{s}}^2) \times (5.97219 \times 10^{24}\, \text{{kg}})}}{{6,603 \times 10^3\, \text{{m}}}}}\][/tex]
[tex]\[v \approx 7,665\, \text{{m/s}}\][/tex]
Therefore, the satellite must have a linear speed of approximately 7,665 m/s to be in a circular orbit at an altitude of 232 km above the Earth's surface.
b) The period of revolution [tex](\(T\))[/tex] of a satellite in a circular orbit can be calculated using the formula:
[tex]\[T = \frac{{2\pi r}}{{v}}\][/tex]
Substituting the values into the formula:
[tex]\[T = \frac{{2\pi \times 6,603 \times 10^3\, \text{{m}}}}{{7,665\, \text{{m/s}}}}\]\\\T \approx 5,289\, \text{{s}}\][/tex]
Therefore, the period of revolution of the satellite is approximately 5,289 seconds.
Know more about linear speed:
https://brainly.com/question/30397189
#SPJ4
After checking other sources it is found that the question is already complete.
A ball is thrown straight up from the top of a 224 foot tall building with an initial speed of 80 feet per second. The height of the ball as a function of time can be modeled by the function h(t)=-16t2+80t+224. When will the ball reach a height of 308 ft?'
The ball will reach a height of 308 ft at approximately 2.7 seconds.
To find when the ball reaches a height of 308 ft, we need to solve the equation h(t) = 308 ft. The equation for the height of the ball as a function of time is given by h(t) = -16t^2 + 80t + 224.
Setting h(t) equal to 308 ft:
-16t^2 + 80t + 224 = 308
Rearranging the equation:
-16t^2 + 80t - 84 = 0
Dividing through by -4 to simplify the equation:
4t^2 - 20t + 21 = 0
We can solve this quadratic equation using factoring or the quadratic formula. Factoring is not possible, so we'll use the quadratic formula:
t = (-b ± √(b^2 - 4ac)) / (2a)
In our case, a = 4, b = -20, and c = 21.
Plugging in the values into the quadratic formula:
t = (-(-20) ± √((-20)^2 - 4(4)(21))) / (2(4))
t = (20 ± √(400 - 336)) / 8
t = (20 ± √64) / 8
t = (20 ± 8) / 8
There are two possible solutions:
t1 = (20 + 8) / 8 = 28 / 8 = 3.5
t2 = (20 - 8) / 8 = 12 / 8 = 1.5
However, we are interested in the time when the ball reaches a height of 308 ft, which is a positive value. Therefore, the ball will reach a height of 308 ft at approximately t ≈ 2.7 seconds.
The ball will reach a height of 308 ft at approximately 2.7 seconds.
To know more about height, visit:
https://brainly.com/question/30620889
#SPJ11
the wave speed on a string under tension is 220 m/sm/s . part a part complete what is the speed if the tension is halved? express your answer with the appropriate units. vv = 156 msms
The speed, expressed with the appropriate units, is approximately `156 m/s`. Hence, the required answer is `v = 156 m/s.`
The wave speed on a string under tension is 220 m/s. The wave speed on a string under tension is given by the formula [tex]`v = sqrt(T/μ)`,[/tex]
where `T` is the tension in newtons, `μ` is the linear density of the string in kilograms per meter, and `v` is the wave speed in meters per second.
Express your answer with the appropriate units.
To determine the wave speed on a string under tension of `T/2`, substitute `T/2` for `T` in the formula, then solve for `v`. [tex]v = sqrt((T/2)/μ).[/tex]
We can simplify this expression by taking out a factor of 1/2 under the square root sign. [tex]v = sqrt(T/4μ)[/tex]
Next, we can further simplify this expression by taking out the factor of 1/4 under the square root sign. [tex]v = (1/2)sqrt(T/μ)[/tex]
Since the wave speed is proportional to the square root of the tension, halving the tension will reduce the wave speed by a factor of the square root of 2.
Therefore: [tex]`v = (1/2)sqrt(T/μ)`[/tex]
`v = (1/2)sqrt(1/2 × 220/μ)
= (1/2) × 10sqrt(2/μ)``v ≈ 156 m/s`.
The speed, expressed with the appropriate units, is approximately `156 m/s`. Hence, the required answer is `v = 156 m/s.`
To learn more about tension visit;
https://brainly.com/question/10169286
#SPJ11
A 2000kg car is driving north at a steady speed of 90 km/hr (25m/s). The rolling resistance and air friction together is 40000N. Determine the magnitude and direction of the net force.
The magnitude of the net force is zero and the direction of the net force is north.
Given that: A 2000kg car is driving north at a steady speed of 90 km/hr (25m/s). The rolling resistance and air friction together is 40000N.To find:The magnitude and direction of the net force.Solution:To find the magnitude of the net force, we need to use Newton's second law of motion, which states that the force acting on an object is equal to the product of the object's mass and its acceleration, that is,F = ma Where,F is the net force acting on the object.m is the mass of the object.a is the acceleration of the object.
To find the direction of the net force, we need to consider the direction of all the forces acting on the object. If all the forces act in the same direction, the direction of the net force is the same as the direction of the forces. If the forces act in opposite directions, the direction of the net force is in the direction of the larger force, that is, the direction of the force that is not canceled out by the other force.
So, we have:m = 2000 kg (mass of the car)a = 0 m/s² (since the car is moving at a constant speed, its acceleration is zero)F_R + F_A = 40000 N (rolling resistance and air friction together is 40000 N)F_net = ma = 2000 kg × 0 m/s² = 0 N (since the car is moving at a constant speed, its acceleration is zero)Since the car is moving north at a steady speed, the direction of the net force is also north. Therefore, the magnitude of the net force is zero and the direction of the net force is north.
For more such questions on force, click on:
https://brainly.com/question/12970081
#SPJ8
What focal length should a pair of contact lenses have if they are to correct the vision of a person with a near point of 56 cm?
The focal length of a pair of contact lenses required to correct a person's vision with a near point of 56 cm is 1.79 diopters.
The focal length of a pair of contact lenses to correct the vision of a person with a near point of 56 cm is 1.79 diopters. The formula used to find the focal length of contact lenses to correct near point defects is: Image distance = f * object distance / (f + object distance)where image distance is the distance of the image from the lens, object distance is the distance of the object from the lens, and f is the focal length of the lens.
The person's near point is 56 cm. This means that the person's far point is at infinity, and they are unable to see objects that are farther away than infinity.To determine the focal length of the lens required to correct this vision defect, we can use the formula:1 / focal length = 1 / object distance + 1 / image distance
Since the person's far point is at infinity, their image distance is equal to the focal length of the corrective lens. Therefore, we can rewrite the formula as:1 / focal length = 1 / object distance + 1 / focal lengthSolving for the focal length, we get:focal length = 1 / ((1 / object distance) + (1 / image distance))focal length = 1 / ((1 / 56 cm) + (1 / ∞))focal length = 1.79 diopters
Therefore, the focal length of a pair of contact lenses required to correct a person's vision with a near point of 56 cm is 1.79 diopters.
To learn more about focal visit;
brainly.com/question/13278945
#SPJ11
In an accelerating lab two protons are projected directly at each other. They collide, bounce from each other, and produce muon (m= 206.7melectron) particles from the collision. (a) What is the minimum total energy that the protons carry into the collision? (b) What is their speed relative to the lab?
the protons' velocity relative to the laboratory is 3.415 × 10⁷ m/s.
the total energy of the muon is given by the equation
E = sqrt(p²c² + m²c⁴)
The minimum total energy of the protons is equal to the total energy of the two muons, which is 2E.
The energy can be minimized if the protons are moving slowly (since the muons are produced from the collision) so that they can absorb all of the energy of the collision and convert it into the energy of the muons.The minimum energy required is thus
2E = 2mc²= 2 × 206.7 × 9.10938356 × 10⁻³¹ × (2.99792458 × 10⁸)²= 3.708 × 10⁻⁷ J
The total energy of the system can be found using the equation
E = sqrt(p²c² + m²c⁴)where p is the magnitude of the momentum of each proton and m is the mass of each proton. The total momentum of the system is zero,
We have
v = p/m
The total energy of the system is
E = sqrt(p²c² + m²c⁴)= sqrt(m²v²c² + m²c⁴)= mc²sqrt(v² + c²)
We can solve for v:
v = sqrt((E/mc²)² - 1) × c = sqrt((2 × 3.708 × 10⁻⁷)/(2 × 1.6726219 × 10⁻²⁷ × (2.99792458 × 10⁸)²) - 1) × (2.99792458 × 10⁸)= 3.415 × 10⁷ m/s
Therefore, the protons' velocity relative to the laboratory is 3.415 × 10⁷ m/s.
learn more about velocity here
https://brainly.com/question/80295
#SPJ11
applying efficiency concepts select the correct words from the drop-down menus to complete the sentence. the work of a machine can never exceed the work because uses some of the work.
The work of a machine can never exceed the work because it uses some of the work. This is because machines are not 100% efficient and some of the energy input is lost as heat, sound, or other forms of energy, which means that the output work cannot be greater than the input work.
Applying efficiency concepts: Efficiency is a measure of how much of the input energy is converted into useful output energy by a machine or process. It is usually expressed as a percentage and can be calculated using the formula: Efficiency = (Useful output energy / Input energy) x 100The work of a machine is the output energy it produces, while the work input is the energy that is put into the machine to produce the output energy. According to the law of conservation of energy, the output energy of a machine cannot be greater than the input energy that is put into the machine. To understand the concept of efficiency better, here's an example: Suppose a machine requires 200 J of input energy to produce 100 J of output energy. The efficiency of the machine would be: Efficiency = (100 / 200) x 100Efficiency = 50%This means that the machine is 50% efficient and the remaining 50% of the input energy is lost as heat, sound, or other forms of energy.
To know more about conservation of energy visit
https://brainly.com/question/29414137
#SPJ11
A 5.50kg bowling ball moving at 9.00m/s collides with a 0.850kg bowling pin, which is scattered at an angle of 15.8° to the initial direction of the bowling ball and with a speed of 15.0m/s. a.) Calculate the final velocity (magnitude and direction of the bowling ball. b.) Is the collision elastic?
a) We can observe that the coefficient of restitution (e) is less than 1( 0.4971). b) Therefore, we can say that the collision is inelastic. are the answers.
Given data: Mass of the bowling ball, mb = 5.50 kg, Initial velocity of the bowling ball, vb = 9.00 m/s, Mass of the bowling pin, mp = 0.850 kg, Final velocity of the bowling pin, v'p = 15.0 m/s.
Final angle made by the bowling pin, θ = 15.8°
We have to find the final velocity of the bowling ball and also, we need to find if the collision is elastic or not.
Calculation:
We can use the principle of conservation of momentum in order to calculate the final velocity of the bowling ball.
The principle of conservation of momentum states that:
Initial momentum = Final momentum
i.e. m*b*vb = m*b*v' b + m*p*v' p
Where, m' b is the final velocity of the bowling ball.
After substituting the given values, we get:
m'b = [m*b*vb - m*p*v' p]/ m'b = [(5.50 kg)(9.00 m/s) - (0.850 kg)(15.0 m/s)] / 5.50 kg= -2.5364 m/s
Since the velocity is negative, the direction of the bowling ball will be opposite to the direction of its initial velocity and its magnitude will be 2.5364 m/s.
Now, let's move to the second part of the question:
Is the collision elastic?
To check whether the collision is elastic or not, we need to calculate the coefficient of restitution (e). The coefficient of restitution (e) is given as the ratio of the relative velocity of separation to the relative velocity of approach.i.e.
e = Relative velocity of separation / Relative velocity of approach
The relative velocity of separation (v'p - v'b) is given as:
v' - v'b = (15.0 m/s)cosθ - (2.5364 m/s)
Now, the relative velocity of approach (u) is given as:
u = vb + v'bu = (9.00 m/s) - (15.0 m/s)cosθ + (2.5364 m/s)
After substituting the given values, we get:
e = (15.0 m/s)cosθ - (2.5364 m/s) / (9.00 m/s - (15.0 m/s)cosθ + (2.5364 m/s))= 0.4971
In an inelastic collision, some part of the kinetic energy is lost as the energy is converted into other forms like heat, sound, etc. and it does not follow the law of conservation of mechanical energy.
to know more about elastic collision visit:
https://brainly.com/question/2356330
#SPJ11
A tennis player swings her 1000 g racket with a speed of 11 m/s . She hits a 60 g tennis ball that was approaching her at a speed of 24 m/s. The ball rebounds at 38 m/s a) How fast is her racket moving immediately after the impact? You can ignore the interaction of the racket with her hand for the brief duration of the collision. (in m/s) b)If the tennis ball and racket are in contact for 12 ms , what is the average force that the racket exerts on the ball? (in N)
a). The velocity of the racket after hitting the ball is 13.72 m/s. b). Thus, the average force exerted by the racket on the ball is 310 N. are the answers
(a) The velocity of the racket after hitting the ball.
Let's apply the law of conservation of momentum here.
Total momentum before collision = Total momentum after collision
As per the problem statement, let's find the momentum before collision;
Momentum of the racket before collision = 1000 g × 11 m/s = 11000 g m/s
Momentum of the ball before collision = 60 g × 24 m/s = 1440 g m/s
Total momentum before collision = 11000 + 1440 = 12440 g m/s
Let's now find the momentum after collision.
Momentum of the racket after collision = mvr
Momentum of the ball after collision = mvp
We know that;
Total momentum after collision = 12440 g m/s
Total momentum after collision = mvr + mvp60 g tennis ball rebounds at 38 m/s
Thus, the momentum of the ball after the collision can be calculated as:
60 g × (-38 m/s) = - 2280 g m/s- sign shows that the direction of the velocity is opposite to the initial direction.
Putting all the values in the equation,
12440 g m/s = 1000 g × v + (- 2280 g m/s)⇒ v = 13.72 m/s
The velocity of the racket after hitting the ball is 13.72 m/s.
(b) The average force that the racket exerts on the ball. The time for which the ball and racket are in contact is 12 ms. Therefore, time taken (t) = 12 × 10^-3 s
Let's use the following equation to calculate the force exerted by the racket on the ball;
F = Δp / ΔtΔp is the change in momentum.
Δp = m × ΔvΔv is the change in velocity;
Δv = 38 - (-24) = 62 m/s
Δp = 0.060 kg × 62 m/s
Δp = 3.72 kg m/s
F = 3.72 kg m/s / (12 × 10^-3 s)
F = 310 N
Thus, the average force exerted by the racket on the ball is 310 N.
to know more about law of conservation of momentum visit:
https://brainly.com/question/17140635
#SPJ11
Io and Europa exhibit geological activity. What is the heat source for this activity?
a. Tidal forces between the moons and Jupiter
b. Nuclear reactions inside the moons
c. Sunlight
d. Tidal forces from the Sun
e. Chemical reactions inside the moons
f. Leftover heat from their formation
a. Tidal forces between the moons and Jupiter
What is the heat source for the geological activity observed on Io and Europa?The heat source for the geological activity observed on Io and Europa is primarily tidal forces exerted by Jupiter. These moons experience significant gravitational interactions with Jupiter, which cause tidal bulges on their surfaces.
The flexing and squeezing of their interiors due to these tidal forces generate heat through tidal heating, leading to volcanic activity, surface fractures, and other geological features.
Learn more about Tidal forces
brainly.com/question/13048222
#SPJ11
.You are facing a loop of wire which carries a clockwise current of 3.0A and which surrounds
an area of 5.8 × 10^-2 m^2. The magnetic dipole moment of the loop is:
A. 3.0A · m^2, away from you
B. 3.0A · m^2, toward you
C. 0.17A · m^2, away from you
D. 0.17A · m^2, toward you
E. 0.17A · m^2, left to right
The magnetic dipole moment of the loop is 0.17A · m², away from you. (Option C)
What is the magnetic dipole moment of a clockwise current-carrying loop with an area of 5.8 × 10^-2 m²?The magnetic dipole moment of a current-carrying loop is a measure of its ability to generate a magnetic field. It is defined as the product of the current flowing through the loop and the area enclosed by the loop. In this case, the loop carries a clockwise current of 3.0A and surrounds an area of 5.8 × 10^-2 m². By multiplying these values together, we can determine the magnetic dipole moment of the loop.
Learn more about magnetic dipole
brainly.com/question/27962324
#SPJ11
what is the ratio of the sun's gravitational force on the moon to the earth's gravitational force on the moon? nothing
The ratio of the sun's gravitational force on the moon to the earth's gravitational force on the moon is approximately 2:1.
The gravitational force that an object with mass exerts on another object with mass is directly proportional to the masses of the objects and inversely proportional to the square of the distance between them. This is known as the universal law of gravitation.
The force of gravity between the moon and the earth is stronger than the force of gravity between the moon and the sun because the moon is much closer to the earth than it is to the sun. The sun's gravitational force on the moon is about 46% of the earth's gravitational force on the moon.
This means that the ratio of the sun's gravitational force on the moon to the earth's gravitational force on the moon is approximately 2:1 .
Learn more about gravitational force
brainly.com/question/32609171
#SPJ11
in the formula e = hf, what does f stand for?
The formula e = h f represents the energy (e) of a photon, which is given by its frequency (f) multiplied by Planck's constant (h). In this formula, f stands for the frequency of the photon.
What is Planck's constant?
Planck's constant relates the energy of a photon to its frequency and is a crucial concept in quantum mechanics. Einstein's theory of relativity was also greatly influenced by Planck's constant, and the two theories are now considered to be the foundations of modern physics. Planck's constant is used in a variety of formulas in physics and is critical in understanding the behavior of photons, which are particles of electromagnetic radiation.
To summarize, in the formula e = hf, f stands for the frequency of the photon. This formula is crucial in understanding the energy of photons and their interaction with matter. Furthermore, Planck's constant is an essential concept in modern physics and is used in various formulas and technologies.
To know more about Planck's constant visit
https://brainly.com/question/27389304
#SPJ11
Determine the moment of Inertia Ix (mm) about the x-axis. Given: X₁ = 1.8 mm X₂ = 8 mm Y₁ = 1.5 mm Y₂ = 7 mm X₁ У1 X₂ Y₂ X
The moment of Inertia Ix (mm) about the x-axis is 28.17 mm⁴ when X₁ = 1.8 mm X₂ = 8 mm Y₁ = 1.5 mm Y₂ = 7 mm
Firstly, we should draw the given shape or simply we can say that rectangular shape as shown below:Here, The moment of inertia Ix (mm) about the x-axis is to be determined. We know that the moment of inertia of a rectangular shape with respect to the x-axis is given as:Ix = (1/12) * b * h³ Where b is the breadth and h is the height of the rectangular shape.
So, In order to find Ix, we should find out the height and breadth of the rectangular shape. Therefore, we use the following formula to find the height and breadth of the rectangular shape:1. X-coordinate of centroid of a rectangular shape is given as X = (X₁ + X₂) / 2.2.
Y-coordinate of centroid of a rectangular shape is given as Y = (Y₁ + Y₂) / 2.3. Breadth or height of a rectangular shape is given as b or h = | X₁ - X₂ | or | Y₁ - Y₂ | respectively. So, Let's determine the coordinates of centroid of the given rectangular shape: X = (1.8 + 8) / 2 = 4.9 mmY = (1.5 + 7) / 2 = 4.25 mm
Now, let's determine the breadth and height of the rectangular shape.b = | X₁ - X₂ | = | 1.8 - 8 | = 6.2 mmh = | Y₁ - Y₂ | = | 1.5 - 7 | = 5.5 mm Putting the values of b and h in the formula of moment of inertia of a rectangular shape, we get:Ix = (1/12) * b * h³= (1/12) * 6.2 * (5.5)³= 28.17 mm⁴Therefore, the moment of inertia Ix (mm) about the x-axis is 28.17 mm⁴.
Know more about Inertia here:
https://brainly.com/question/3268780
#SPJ11
Topic: Physics 2 ELECTRIC FORCE AND ELECTRIC FIELD
Please answer all questions, type written if possible, complete
solution, thank you! appreciate your help.
1.1
Compare gravitational force with an el
A negatively charged particle q1 = -8μC is observed to experience an attractive force of 6.5 x 10-5 N when it is 30 cm away from another particle 92. What are the magnitude and sign of q2? What is th
Answer:
The magnitude of q2 is approximately 8.12 x 10^-11 C, and it is positively charged.
In the given scenario, we have a negatively charged particle q1 with a charge of -8μC experiencing an attractive force of 6.5 x 10-5 N when it is at a distance of 30 cm from another particle. We need to determine the magnitude and sign of the charge (q2) on the second particle.
The force between two charged particles can be calculated using Coulomb's law, which states that the force (F) between two point charges is directly proportional to the product of their charges (q1 and q2) and inversely proportional to the square of the distance (r) between them:
F = k * |q1| * |q2| / r^2
Where:
F is the force between the particles,
k is the electrostatic constant (k ≈ 9 x 10^9 N m^2/C^2),
|q1| and |q2| are the magnitudes of the charges,
and r is the distance between the charges.
Given:
|q1| = 8μC = 8 x 10^-6 C
F = 6.5 x 10^-5 N
r = 30 cm = 0.3 m
Plugging in the values into Coulomb's law, we can solve for |q2|:
6.5 x 10^-5 N = (9 x 10^9 N m^2/C^2) * (8 x 10^-6 C) * |q2| / (0.3 m)^2
Simplifying the equation:
6.5 x 10^-5 N = (9 x 10^9 N m^2/C^2) * (8 x 10^-6 C) * |q2| / 0.09 m^2
Rearranging the equation to solve for |q2|:
|q2| = (6.5 x 10^-5 N * 0.09 m^2) / (9 x 10^9 N m^2/C^2 * 8 x 10^-6 C)
|q2| = 0.585 x 10^-4 C / 0.72 x 10^4 C^2
|q2| ≈ 8.12 x 10^-11 C
Since the force is attractive and q1 is negatively charged, the sign of q2 must be positive to induce attraction. Therefore, the magnitude of q2 is approximately 8.12 x 10^-11 C, and it is positively charged.
To know more about magnitude visit:
https://brainly.com/question/30337362
#SPJ11
If a capacitor has opposite 7.3x10-6 charges on the plates, and an electric field of 6x106 V/m is desired between the plates, what must each plate's area be?
Each plate's area of the capacitor must be approximately 2.4 m² to achieve an electric field of 6 x 10^6 V/m between the plates.
The electric field (E) between the plates of a capacitor is related to the charge (Q) on the plates and the area (A) of the plates by the equation:
E = Q / (ε₀ * A)
Where:
E is the electric field (in V/m)
Q is the charge on the plates (in C)
ε₀ is the permittivity of free space (approximately 8.85 x 10^-12 F/m)
A is the area of the plates (in m²)
Q = 7.3 x 10^-6 C
E = 6 x 10^6 V/m
ε₀ = 8.85 x 10^-12 F/m
We can rearrange the equation to solve for A:
A = Q / (ε₀ * E)
Substituting the given values into the equation, we get:
A = (7.3 x 10^-6 C) / (8.85 x 10^-12 F/m * 6 x 10^6 V/m)
= 2.415 m²
Rounding to a reasonable number of significant figures, each plate's area must be approximately 2.4 m².
Therefore, each plate's area of the capacitor must be approximately 2.4 m² to achieve an electric field of 6 x 10^6 V/m between the plates.
To know more about Capacitor, visit
brainly.com/question/21851402
#SPJ11
A man walks 4 miles in a direction 30° north of east. He then walks a distance x miles due east. He turns around to look back at his starting point, which is at an angle of 10° south of west. (a) Ma
(a) The distance the man walks due east is x = 4 miles sin 40° / sin 70°.
The angle 30° north of east is 60° from the x-axis which is east, so we need to resolve that into components in the x and y directions:4 miles cos 60° = 2 miles in the positive x direction4 miles sin 60° = 2√3 miles in the positive y direction Next he walks a distance x miles due east, so we add that to the x component:2 + x miles in the positive x direction He then turns around to look back at his starting point. The angle he forms with the x-axis, which is west, is 10° south of west, so that angle is 190°.That means that the angle between the man's direction and the x-axis is (190° - 30°) = 160°.The total horizontal distance he walks is then:4 miles cos 160° + x miles cos (180° - 160°) = -4cos 20° + x = x - 4 cos 20°Therefore, the distance the man walks due east is x = 4 miles sin 40° / sin 70°.
Know more about distance, here:
https://brainly.com/question/31884185
#SPJ11
Plutonium-239 has a half-life of approximately 24,000 years.
show that it will take about 190,000 years for the
amount of plutonium-239 in a sample to decrease to 1/256 of its
present amount.
This implies that for a sample of plutonium-239, the amount of plutonium-239 decreases to 1/256 of its present amount after 72,000 years.
Plutonium-239 isotope decays with a half-life of around 24,000 years. The half-life of plutonium-239, which is roughly 24,000 years, suggests that every 24,000 years, the quantity of plutonium-239 is reduced by 50%. As a result, if we keep dividing the amount of plutonium-239 in a sample by 2 every 24,000 years, we'll eventually get to a point where the remaining amount is 1/256th of the initial amount.
Plutonium is a radioactive compound component with the image Pu and nuclear number 94. It is a silvery-gray actinide metal that oxidizes to a dull coating and tarnishes when exposed to air. The component ordinarily shows six allotropes and four oxidation states.
Know more about plutonium, here:
https://brainly.com/question/31902120
#SPJ11
how many pulses would be detected in one minute? assume that the two beams are located along the pulsar's equator, which is aligned with earth.
The number of pulses that would be detected in one minute from a pulsar located along the pulsar's equator, which is aligned with earth, is equal to the pulsar's rotational frequency in revolutions per minute.
A pulsar is a highly magnetized, rotating neutron star that emits beams of electromagnetic radiation out of its magnetic poles. These beams are emitted in a pattern that resembles a lighthouse beacon because they are visible to telescopes as pulses of light. Pulsars are extremely precise astronomical clocks and are used by scientists to study the universe.
A pulsar's rotational frequency determines the number of pulses it emits in a given time. The rotational frequency is measured in revolutions per minute. The number of pulses that would be detected in one minute from a pulsar located along the pulsar's equator, which is aligned with Earth, is equal to the pulsar's rotational frequency in revolutions per minute.
Therefore, if a pulsar has a rotational frequency of 60 revolutions per minute, then it would emit 60 pulses in one minute when observed from Earth.
Learn more about electromagnetic radiation here:
https://brainly.com/question/2334706
#SPJ11
