The graph shows a distribution of data.




A graph shows the horizontal axis numbered 1 to x. The vertical axis is unnumbered. The graph shows an upward trend from 1 to 2 then a downward trend from 2 to 3.


What is the standard deviation of the data?


0.5

1.5

2.0

2.5

The Graph Shows A Distribution Of Data.A Graph Shows The Horizontal Axis Numbered 1 To X. The Vertical

Answers

Answer 1
the answer to the graph is 2.5

Related Questions

Sketch the area under the standard normal curve over the indicated interval and find the specified area. (Round your answer to four decimal places.) The area to the right of z = 0 is Sketch the area under the standard normal curve over the indicated interval and find the specified area. (Round your answer to four decimal places.) The area to the left of z = - 1.23 is. Sketch the area under the standard normal curve over the indicated interval and find the specified area. (Round your answer to four decimal places.) The area to the right of z = 1.45 is. Sketch the area under the standard normal curve over the indicated interval and find the specified area. (Round your answer to four decimal places.) The area between z = 0 and z = - 1.87 is.

Answers

Given below are approximations and rounding to four decimal places may introduce slight differences in the final results.

To sketch the area under the standard normal curve for the given intervals, we'll use a standard normal distribution curve as a reference. However, since I'm a text-based model, I won't be able to provide you with an actual sketch. Instead, I'll describe the intervals and the corresponding areas.

1. Area to the right of z = 0:
  Since the standard normal curve is symmetric, the area to the right of z = 0 is equal to the area to the left of z = 0. This area represents the cumulative probability up to z = 0, which is exactly 0.5000.

2. Area to the left of z = -1.23:
  To find the area to the left of z = -1.23, we need to find the cumulative probability up to z = -1.23. Using a standard normal distribution table or a calculator, we can find this area to be approximately 0.1093.

3. Area to the right of z = 1.45:
  Similarly, to find the area to the right of z = 1.45, we need to find the cumulative probability up to z = 1.45. Using a standard normal distribution table or a calculator, we can find this area to be approximately 0.0735.

4. Area between z = 0 and z = -1.87:
  To find the area between z = 0 and z = -1.87, we need to find the difference in cumulative probabilities between these two z-values. First, we find the cumulative probability up to z = 0, which is 0.5000. Then, we find the cumulative probability up to z = -1.87, which is approximately 0.0307. Finally, we subtract the smaller cumulative probability from the larger one: 0.5000 - 0.0307 = 0.4693.

Please note that these are approximations and rounding to four decimal places may introduce slight differences in the final results.

To know more about area click-
http://brainly.com/question/25292087
#SPJ11

We are given following array: 12, 17, 23, 29, 31, 39, 44, 52, 63. If we wanted to find 63 using a binary search, which integers will we visit until we find 63? A. Since the array is sorted and 63 is at the end of the array, a binary search finds it in one step without visiting any other numbers before 63. B. It starts from the beginning and compares if the current element is equal to 63. So, it visits 12, 17, 23 and all other elements until it finds 63 at last. C. A binary search visits every second element, skipping one until it finds the value, i.e. first it visits odd-indexed numbers and then even-indexed numbers. So, it visits 12, 23, 31, 44 and finds 63. There is no need to visit even-indexed numbers since it has already found it. In that way, the time to find the value will be 2 times less. D. It visits the middle of the array first, which is 31. Since 63 is greater than 31, it visits the middle of the right side, which is 44. Since 63 is greater than 44, it visits the middle of the right side, which is 52. Since 63 is greater than 52, it visits the middle of the right side which is 63 and finds it

Answers

The correct answer to this question is D. A binary search is an algorithm that efficiently searches for a particular value in a sorted array by repeatedly dividing the search interval in half. In this case, we are searching for the value 63 in the given array of integers.

Starting with the middle element of the array, which is 31, we compare it with our target value, i.e., 63. Since 63 is greater than 31, we eliminate the left half of the array and continue our search on the right half. We then take the middle element of the right half, which is 44, and again compare it with the target value. Since 63 is greater than 44, we again eliminate the left half of the remaining array and continue our search on the right half. Finally, we take the middle element of the right half, which is 63 itself - the value we are searching for. Therefore, the integers visited during the binary search are 31, 44, and 63.

This method of searching is much more efficient than linear search (option B), which involves comparing each element of the array with the target value until a match is found. Binary search has a time complexity of O(log n), where n is the number of elements in the array, making it much faster than linear search for large arrays. Option C is incorrect because a binary search always divides the search interval in half, irrespective of the index of the current element being considered. Finally, option A is incorrect because although the target value is at the end of the array, binary search does not assume this and still performs the necessary comparisons to find the value.

Learn more about binary search here:

https://brainly.com/question/29734003

#SPJ11

a bag contains 3 blue marbles and 2 yellow marbles. one example of independent events using this bag of marbles is randomly selecting a blue marble, , and then randomly selecting another blue marble. the probability of the independent events described is .

Answers

The probability of the independent events described, which involves randomly selecting a blue marble and then randomly selecting another blue marble from a bag containing 3 blue marbles and 2 yellow marbles, can be calculated using the multiplication rule of probability.

The probability of an event is calculated by dividing the number of favorable outcomes by the total number of possible outcomes. In this case, the first event involves randomly selecting a blue marble. Since there are 3 blue marbles out of a total of 5 marbles, the probability of selecting a blue marble in the first event is 3/5.

For the second event, after the first blue marble has been selected, there are now 4 marbles remaining in the bag, with 2 blue marbles and 2 yellow marbles. Therefore, the probability of selecting another blue marble in the second event is 2/4.

According to the multiplication rule of probability, the probability of two independent events occurring is found by multiplying the probabilities of each individual event. Hence, the probability of randomly selecting a blue marble and then randomly selecting another blue marble is (3/5) * (2/4) = 6/20 = 0.3.

Therefore, the probability of the independent events described is 0.3.

To learn more about probability click here:

brainly.com/question/31828911

#SPJ11

8. Consider the probability density function for a continuous random variable X, 0 {2e-2/3 if OSIS M 0 otherwise f(x)= = (a) What must the value of M be to ensure that f(x) is in fact a probability density function of X? (A) 2ln(3) (D) 3 ln(3) (E) [infinity] (B) In (3) (B) In (3) (C) 3 ln(2) (C) 3 ln(2) (b) Determine the cumulative distribution function of f(x) on the interval x = [0, M]. (c) Suppose we wish to generate random numbers in this distribution. What function must we pass uniform (0, 1) random numbers through to generate such random numbers?

Answers

The solution of equation is M = 2ln(3). We can generate a random number in this distribution by passing a uniform (0, 1) random number through the function F^(-1)(u).

In order for f(x) to be a probability density function of X, the integral from -∞ to ∞ of f(x) must be equal to 1. Hence, we need to evaluate the integral from 0 to M of

2e^(-2/3x)dx,

which gives 3(1 - e^(-2/3M)) = 1.

Solving this equation, we get M = 2ln(3).

Therefore, the correct option is (A).

The cumulative distribution function (CDF) of f(x) on the interval x = [0, M] is given by

F(x) = ∫f(t) dt, from t=0 to t=x=0 if x ≤ 0 and = ∫f(t) dt, from t=0 to t=x if 0 < x ≤ M= 1 if x ≥ M

Therefore, for x in the range [0, M],

F(x) = ∫f(t) dt, from t=0 to t=x= ∫2e^(-2/3t) dt, from t=0 to t=x= 3(1 - e^(-2/3x)),

since ∫e^at da from 0 to t = (1/a)(e^at - 1), where a = -2/3.

Therefore, the correct option is (C).

To generate random numbers in this distribution, we can use the inverse transform method. The first step is to evaluate the inverse of the CDF. For x in the range [0, M], the inverse of the CDF is given by

F^(-1)(u) = Mln(3u)/ln(3),

where u is a random number drawn from a uniform distribution in the range [0, 1].

Therefore, we can generate a random number in this distribution by passing a uniform (0, 1) random number through the function F^(-1)(u).

Hence, the correct option is (D).

Learn more about inverse transform visit:

brainly.com/question/30404106

#SPJ11

Cynthia Knott's oyster bar buys fresh Louisiana oysters for $4 per pound and sells them for $10 per pound. Any oysters not sold that day are sold to her cousin, who has a nearby grocery store, for $3 per pound. Cynthia believes that demand follows the normal distribution, with a mean of 100 pounds and a standard deviation of 20 pounds. How many pounds should she order each day? Refer to the for z-values. Cynthia should order pounds of oysters each day (round your response to one decimal place).

Answers

Cynthia Knott's oyster bar buys fresh Louisiana oysters for $4 per pound and sells them for $10 per pound. Cynthia should order approximately 126.5 pounds of oysters each day.

To determine the optimal order quantity, we need to consider the normal distribution of demand.

First, we calculate the z-value corresponding to the desired service level. Let's assume a service level of 90%, which corresponds to a z-value of 1.28.

Next, we calculate the standard deviation of the daily demand by multiplying the standard deviation of 20 pounds by the z-value:

Standard deviation of daily demand = Standard deviation * z-value

                                                 = 20 * 1.28

                                                 = 25.6 pounds

Now, we can calculate the optimal order quantity using the formula:

Order quantity = Mean demand + z-value * Standard deviation of daily demand

                     = 100 + 1.28 * 25.6

                     ≈ 126.5 pounds

Therefore, Cynthia should order approximately 126.5 pounds of oysters each day to meet the desired service level.

Learn more about standard deviation here: brainly.com/question/29115611

#SPJ11

An economist at the Florida Department of Labor and Employment needs to estimate the unemployment rate in Okeechobee county. The economist found that 5.6% of a random sample of 347 county residents were unemployed. Find three different confidence intervals for the true proportion of Okeechobee county residents who are unemployed. Calculate one confidence interval with a 90% confidence level, one with a 98% confidence level, and one with a 99\% confidence level. Notice how the confidence level affects the margin of error and the width of the interval. Report confidence interval solutions using interval notation. Express solutions in percent form, rounded to two decimal places, if necessary. - The margin of error for a 90% confidence interval is given by E= A 90% confidence interval is given by - The margin of error for a 98% confidence interval is given by E= A 98% confidence interval is given by - The margin of error for a 99% confidence interval is given by E= A 99% confidence interval is given by If the level of confidence is increased, leaving all other characteristics constant, the margin of error of the confidence interval wilt If the level of confidence is increased, leaving all other characteristics constant, the width of the confidence interval will

Answers

For a 99% confidence interval, the margin of error is calculated as E approx. = 0.036. The 99% confidence interval is [0.056 - 0.036, 0.056 + 0.036], or approximately [0.020, 0.092].

For a 90% confidence interval, the margin of error can be calculated using the formula E = √[(p^^(1-p^^))/n], where p^^ is the sample proportion and n is the sample size. Plugging in the values from the study (p^^ = 0.056 and n = 347), the margin of error is E approx. =  0.025. The 90% confidence interval is then [0.056 - 0.025, 0.056 + 0.025], or approximately [0.031, 0.081].

Similarly, for a 98% confidence interval, the margin of error can be calculated using the same formula, resulting in E approx. = 0.034. The 98% confidence interval is [0.056 - 0.034, 0.056 + 0.034], or approximately [0.022, 0.090].

For a 99% confidence interval, the margin of error is calculated as E approx. = 0.036. The 99% confidence interval is [0.056 - 0.036, 0.056 + 0.036], or approximately [0.020, 0.092].

Increasing the level of confidence, while keeping all other characteristics constant, leads to wider confidence intervals. This is because higher confidence levels require accounting for a larger range of potential values, resulting in a larger margin of error and therefore a wider interval.

To learn more about confidence interval click here, brainly.com/question/32546207

#SPJ11

solve the question please

Answers

Yes, the graph represents a function because it passes the vertical line test.

What is the vertical line test?

The vertical line test is a graphical method of determining whether a curve in the plane represents the graph of a function by visually examining the number of intersections of the curve with vertical lines.

The test states that a graph represents a function if and only if all vertical lines intersect the graph at most once.

From the given graph, we can see that there is no point or region in the curve where a vertical line drawn will intersect the curve at two points.

This means that the curve represents a function.

Learn more about vertical line test here:

https://brainly.com/question/1821791

#SPJ1

DETAILS PREVIOUS ANSWERS BBBASICSTAT8 7.6.012.5. MY NOTES In the following problem, check that it is appropriate to use the normal approximation to the binomial. Then use the normal distribution to estimate the requested probabilities What are the chances that a person who is murdered actually knew the murderer? The answer to this question explains why a lot of poilce detective work begins with relatives and friends of the victim About 69% of people who are murdered actually knew the person who committed the murdert Suppose that a detective file in New Orleans has 6 current unsolved murders.

Answers

Based on the given statement, it seems that we need to perform a hypothesis test to determine whether gender has an effect on the opinion on salary being too low, equitable/fair, or paid well.

The null hypothesis H0 would be that gender does not have an effect on the opinion, while the alternative hypothesis Ha would be that gender does have an effect on the opinion.

So, the hypotheses can be stated as:

H0: Gender does not have an effect on the opinion on salary being too low, equitable/fair, or paid well.

Ha: Gender has an effect on the opinion on salary being too low, equitable/fair, or paid well.

To calculate the test statistic, we would need data regarding the opinions of a sample of individuals from both genders. Once we have this data, we can perform a chi-square test of independence to determine the relationship between gender and opinion. The p-value obtained from the chi-square test will help us determine whether to reject or fail to reject the null hypothesis.

It should be noted that the given question does not provide any data on the opinions of individuals from different genders, so we cannot perform the test at this point.

Learn more about hypothesis here:

https://brainly.com/question/30899146

#SPJ11

show work please
If P(A) = 0.7, P(B) = 0.6, and A and B are independent, what is the P(A and B)? Select one: a. 0.13 b. 0.1 C. 0.42

Answers

The probability of events A and B both occurring, P(A and B), is 0.42. The correct answer is c. 0.42. The probability of two independent events A and B both occurring, denoted as P(A and B), can be calculated by multiplying their individual probabilities, P(A) and P(B).

P(A and B) = P(A) * P(B)

In this case, P(A) = 0.7 and P(B) = 0.6. Substituting these values into the formula, we have:

P(A and B) = 0.7 * 0.6

Calculating the product, we get:

P(A and B) = 0.42

Therefore, the probability of events A and B both occurring, P(A and B), is 0.42.

When two events A and B are independent, it means that the occurrence of one event does not affect the probability of the other event. In such cases, the probability of both events occurring is equal to the product of their individual probabilities.

In this scenario, we are given the probabilities P(A) = 0.7 and P(B) = 0.6. Since A and B are independent, we can directly calculate the probability of both events occurring by multiplying their probabilities: P(A and B) = 0.7 * 0.6 = 0.42.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

The cost of producing x units of a commodity is given by C(x) = 130+ 18x -0.4x². Find the marginal cost function. Answer 2 Points Choose the correct answer from the options below. - 130 148 -0.8x O -0.4 x² O130+ 18x0.4x² 018-0.8x

Answers

To find the marginal cost function of the given production cost function C(x), we need to take the derivative of the cost function with respect to the quantity x, i.e., we take the first derivative of the cost function C(x).Then the marginal cost function of the production cost function C(x) is given by: C'(x) = 18 - 0.8x.

The given production cost function is C(x) = 130 + 18x - 0.4x² Taking the derivative of C(x) with respect to x, we get:

C'(x) = d/dx (130 + 18x - 0.4x²)C'(x) = 0 + 18 - 0.8xC'(x) = 18 - 0.8x

Therefore, the marginal cost function of the given production cost function C(x) is C'(x) = 18 - 0.8x. The cost of producing x units of a commodity is given by C(x) = 130+ 18x -0.4x². Find the marginal cost function. The marginal cost function is an important concept in economics and business that measures the change in the total cost of production as the quantity produced changes by one unit. To find the marginal cost function of a production cost function, we need to take the derivative of the cost function with respect to the quantity produced. In this case, the given production cost function is C(x) = 130 + 18x - 0.4x². Taking the derivative of C(x) with respect to x, we get: C'(x) = d/dx (130 + 18x - 0.4x²)C'(x) = 0 + 18 - 0.8xC'(x) = 18 - 0.8x Therefore, the marginal cost function of the given production cost function C(x) is C'(x) = 18 - 0.8x.The marginal cost function is important for businesses because it helps them to determine the optimal level of production that will minimize their total cost of production and maximize their profits. By calculating the marginal cost function, businesses can determine the cost of producing an additional unit of output and compare it to the price that they can sell that unit for in the market. If the marginal cost of production is less than the price that they can sell the unit for, then it is profitable for them to produce more. On the other hand, if the marginal cost of production is greater than the price that they can sell the unit for, then it is not profitable for them to produce more and they should reduce their level of production.

To summarize, the marginal cost function of the given production cost function C(x) = 130 + 18x - 0.4x² is C'(x) = 18 - 0.8x. The marginal cost function is an important concept in economics and business that measures the change in the total cost of production as the quantity produced changes by one unit. By calculating the marginal cost function, businesses can determine the optimal level of production that will minimize their total cost of production and maximize their profits.

To learn more about production cost function visit:

brainly.com/question/14682698

#SPJ11

Check all of the following that are true for the series ∑ n=1
[infinity]

n 2
3−cosn 2

. A. This series converges B. This series diverges C. The integral test can be used to determine convergence of this series. D. The comparison test can be used to determine convergence of this series. E. The limit comparison test can be used to determine convergence of this series. F. The ratio test can be used to determine convergence of this series. G. The alternating series test can be used to determine convergence of this series.

Answers

By the Comparison test, the given series converges.

Let's check which of the given options are true for the series `∑ n=1 [infinity]n^2 3−cosn^2`.

A. This series converges: False

B. This series diverges: True

C. The integral test can be used to determine convergence of this series: False

D. The comparison test can be used to determine convergence of this series: True

E. The limit comparison test can be used to determine convergence of this series: False

F. The ratio test can be used to determine convergence of this series: False

G. The alternating series test can be used to determine convergence of this series: False

Here, `n^2 3-cosn^2 > 0` for all `n > 0`.

Therefore, we can't apply the Alternating series test.

We can't use the Ratio test as `n^2 3-cosn^2` doesn't contain factorials.

The Integral test can't be used because the integral of `n^2 3-cosn^2` can't be expressed in a simple form.

The Comparison test can be used. We will compare it with `n^2`.Thus, `n^2 3-cosn^2 > n^2`.

Therefore, if `∑n^2` converges, then the given series will also converge.

We know that the series `∑n^2` is a p-series with `p = 2`, which means it converges.

Thus, by the Comparison test, the given series also converges.

Hence, the correct options are B and D.

To learn more about convergence

https://brainly.com/question/31994753

#SPJ11

A test is made of H0 : μ=33 versus H1 : μ>33. A sample of size 28 is drawn. The sample mean and standard deviation are xˉ=39 and s=5. (a) Compute the value of the test statistic t. Round your answer to two decimal places. The value of the test statistic is t=

Answers

The value of the test statistic t is , 18.68.

Now , We can use the formula:

t = (x - μ) / (s / √(n))

Where, x is the sample mean (which is given as 39), μ is the hypothesized population mean (which is 33), s is the sample standard deviation (which is given as 5), and n is the sample size (which is 28).

Plugging in the values, we get:

t = (39 - 33) / (5 / √(28))

t = 18.68

Rounding to two decimal places, we get:

t = 18.68

So, the value of the test statistic t is , 18.68.

Learn more about the probability visit:

https://brainly.com/question/13604758

#SPJ4

Identify the type I error and the type il error that corresponds to the given hypothesis: The proportion of people who wrie with their Inet hard is equal to 0.15. Which of the following is a type 1 error? A. Reject the claim that the proportion of pecple who write with their left hand is 0.15 when the proporton is actualy 0.15. B. Reject the claim that the proportion of pecple who wrile with their left hand is 0.15 when the proportion is actually different from 0.15. C. Fai to reject the clain that the proportion of people who write with their left hand is 0.15 when the proporian is actually diferent from 0.15. D. Fal to reject the claim that the propoction of people who write with their let hand is 0.15 when the proporion is actually 0.15

Answers

The correct answer is option C. Failing to reject the claim that the proportion of people who write with their left hand is 0.15 when the proportion is actually different from 0.15 corresponds to a Type II error.

In hypothesis testing, a Type I error occurs when the null hypothesis is rejected even though it is true. On the other hand, a Type II error occurs when the null hypothesis is not rejected even though it is false.

In this case, the null hypothesis is that the proportion of people who write with their left hand is equal to 0.15.

Based on the given options:

A. Rejecting the claim that the proportion of people who write with their left hand is 0.15 when the proportion is actually 0.15 is not a Type I error because the null hypothesis is true.

B. Rejecting the claim that the proportion of people who write with their left hand is 0.15 when the proportion is actually different from 0.15 is also not a Type I error. This is because the null hypothesis assumes the proportion is exactly 0.15, and if it is different, rejecting the null hypothesis would be correct.

C. Failing to reject the claim that the proportion of people who write with their left hand is 0.15 when the proportion is actually different from 0.15 is a Type II error. The null hypothesis is false, but it is not rejected.

D. Failing to reject the claim that the proportion of people who write with their left hand is 0.15 when the proportion is actually 0.15 is not a Type I error. In this case, the null hypothesis is true, and not rejecting it is correct.

Learn more about: hypothesis testing

https://brainly.com/question/29996729

#SPJ11

A manufacturer is interested in the output voltage of a power supply used in a PC. Output voltage is assumed to be normally distributed with standard deviation 0.25 volt, and the manufacturer wishes to test H0​:μ=5 volts against H1​:μ=5 volts, using n=18 units. Round your answers to three decimal places (e.g. 98.765). (a) The acceptance region is 4.85≤Xˉ≤5.15. Find the value of α. α= (b) Find the power of the test for detecting a true mean output voltage of 5.1 voltage. Power =

Answers

(a) The value of α, the probability of Type I error, is approximately 0.007 or 0.7%. (b) The power of the test, the probability of correctly rejecting H0, is approximately 0.0894 or 8.94% for a true mean output voltage of 5.1 volts.

To find the exact values of α and the power of the test, we need to calculate the probabilities associated with the standard normal distribution using the given Z-values.

(a) Calculating α:

Z1 = (4.85 - 5) / (0.25 / √18) ≈ -2.683

Z2 = (5.15 - 5) / (0.25 / √18) ≈ 2.683

Using a standard normal distribution table or calculator, we can find the probabilities

P(Z < -2.683) + P(Z > 2.683) ≈ 2 * P(Z > 2.683)

By looking up the value of 2.683 in the standard normal distribution table or using a calculator, we find that P(Z > 2.683) is approximately 0.0035.

Therefore, α ≈ 2 * 0.0035 = 0.007

(b) Calculating the power of the test

Z1 = (4.85 - 5.1) / (0.25 / √18) ≈ -1.699

Z2 = (5.15 - 5.1) / (0.25 / √18) ≈ 1.699

Using a standard normal distribution table or calculator, we can find the probabilities

P(Z < -1.699) + P(Z > 1.699) ≈ 2 * P(Z > 1.699)

By looking up the value of 1.699 in the standard normal distribution table or using a calculator, we find that P(Z > 1.699) is approximately 0.0447.

Therefore, the power of the test ≈ 2 * 0.0447 = 0.0894 or 8.94% (rounded to three decimal places).

To know more about Probability:

brainly.com/question/32117953

#SPJ4

The proportion of eligible voters in the next election who will vote for the incumbent is assumed to be 53.4%. What is the probability that in a random sample of 440 voters, less than 50% say they will vote for the incumbent?
Probability =

Answers

The proportion of eligible voters in the next election who will vote for the incumbent is assumed to be 53.4%. Therefore, the probability of any randomly selected voter voting for the incumbent is:p = 0.534 Let X denote the number of voters out of the 440 voters who say that they will vote for the incumbent.

X follows a binomial distribution with n = 440 and p = 0.534.The probability that in a random sample of 440 voters, less than 50% say they will vote for the incumbent is given by:

P(X < 0.5 × 440)P(X < 220) = P(X ≤ 219

)Now we use the normal approximation to the binomial distribution with a mean and variance of the binomial distribution is given by,

Mean = μ = np = 440 × 0.534 = 234.96

Variance = σ2 = npq = 440 × 0.534 × (1 − 0.534) = 122.663224Σ^2 = 11.07

(approx.)Using the standard normal table, we get

P(Z < (219.5 – 234.96) / 11.07) = P(Z < –1.40) = 0.0808

The probability that in a random sample of 440 voters, less than 50% say they will vote for the incumbent is 0.0808 or 8.08%.Therefore, the required probability is 0.0808 or 8.08%.Answer: Probability = 0.0808 or 8.08%.

To know more about probability visit:-

https://brainly.com/question/18687466

In a certain journal, an author of an article gave the following research report for one sample t-test: t(30) = 2.045, p < 0.05. How many individuals participated in this experiment?
a. 28
b. 30
c. 29
d. 31

Answers

The given statistical test value is t(30) = 2.045, p < 0.05, and we are to find the number of individuals who participated in this experiment. Therefore, we can determine the number of individuals who participated in this experiment through the given sample size and the degrees of freedom.

The correct answer is option (d) 31.

Degrees of freedom = sample size - 1We know that the degrees of freedom is 30 from t(30). Therefore, the sample size can be determined as: Sample size = degrees of freedom + 1= 30 + 1= 31 individuals Hence, the correct answer is option (d) 31. In a certain journal, an author of an article gave the following research report for one sample t-test: t(30) = 2.045, p < 0.05. How many individuals participated in this experiment?

Therefore, we can determine the number of individuals who participated in this experiment through the given sample size and the degrees of freedom. Therefore, we can determine the number of individuals who participated in this experiment through the given sample size and the degrees of freedom.

To know more about value visit:

https://brainly.com/question/1578158

#SPJ11

a. A sample of 390 observations taken from a population produced a sample mean equal to 92.25 and a standard deviation equal to 12.20. Make a95\% confidence interval for μ. Round your answers to two decimal places. b. Another sample of 390 observations taken from the same population produced a sample mean equal to 91.25 and a standard deviation equal to 14.35. Make a95\% confidence interval for $k. Round your answers to two decimal places. c. A third sample of 390 observations taken from the same population produced a sample mean equal to 89.49 and a standard deviation equal to 13.30. Make a 95% confidence interval for μ. Round your answers to two decimal places. d. The true population mean for this population is 90.17. Which of the confidence intervals constructed in parts a through c cover this population mean and which do not? The confidence intervals of cover in but the confidence interval of doles) not.

Answers

a. the 95% confidence interval for μ is approximately (90.04, 94.46). b. the 95% confidence interval for $k is approximately (88.72, 93.78). c. the 95% confidence interval for μ is approximately (87.63, 91.35). d. the confidence interval in part a covers the population mean of 90.17.

a. For the first sample, with a sample size of 390, a sample mean of 92.25, and a standard deviation of 12.20, we can calculate the 95% confidence interval for the population mean (μ).

Using the formula for the confidence interval:

Confidence Interval = sample mean ± (critical value) * (standard deviation / √sample size)

The critical value can be obtained from a standard normal distribution table or using a calculator. For a 95% confidence level, the critical value is approximately 1.96.

Plugging in the values, we have:

Confidence Interval = 92.25 ± (1.96) * (12.20 / √390)

Calculating the interval, we get:

Confidence Interval ≈ 92.25 ± 1.96 * (12.20 / √390)

                  ≈ 92.25 ± 1.96 * 0.618

                  ≈ 92.25 ± 1.211

Rounded to two decimal places, the 95% confidence interval for μ is approximately (90.04, 94.46).

b. For the second sample, with the same sample size of 390, a sample mean of 91.25, and a standard deviation of 14.35, we can follow the same steps to calculate the 95% confidence interval for the population parameter $k.

Using the formula, we have:

Confidence Interval = 91.25 ± (1.96) * (14.35 / √390)

Calculating the interval, we get:

Confidence Interval ≈ 91.25 ± 1.96 * (14.35 / √390)

                  ≈ 91.25 ± 2.532

Rounded to two decimal places, the 95% confidence interval for $k is approximately (88.72, 93.78).

c. For the third sample, with the same sample size of 390, a sample mean of 89.49, and a standard deviation of 13.30, we can calculate the 95% confidence interval for the population mean (μ) using the same steps as before.

Confidence Interval = 89.49 ± (1.96) * (13.30 / √390)

Calculating the interval, we get:

Confidence Interval ≈ 89.49 ± 1.96 * (13.30 / √390)

                  ≈ 89.49 ± 1.862

Rounded to two decimal places, the 95% confidence interval for μ is approximately (87.63, 91.35).

d. The true population mean for this population is 90.17. To determine which confidence intervals cover this population mean, we compare the value to the confidence intervals obtained in parts a, b, and c.

From the confidence intervals:

a. (90.04, 94.46)

b. (88.72, 93.78)

c. (87.63, 91.35)

We can see that the confidence interval in part a covers the population mean of 90.17, while the confidence intervals in parts b and c do not cover the population mean.

Learn more about confidence interval here

https://brainly.com/question/20309162

#SPJ11

A company claims the average content of containers of a particular lubricant is 10 liters. The contents (unit: liter) of a random sample of 10 containers are the following: 10.2,9.7,10.1,10.3,10.1,9.8,9.9,10.4,10.3,9.8. Assume that the distribution of contents is normal. Is the claim by the company correct? That is, is there evidence that the average content of the containers of a particular lubricant is 10 liters? (a) Conduct a hypothesis test at a level of α=0.05, making sure to state your conclusion in the context of the problem. (Hints: use t model and consider a two-sided alternative hypothesis) Step 1: State null and alternative hypothesis. Step 2: Assumptions and conditions check, and decide to conduct a one-sample t-test. Step 3: Compute the sample statistics and find p-value. Step 4: Interpret you p-value, compare it with α=0.05 and make your decision. (b) Construct and interpret a 95\% confidence interval for the average content of containers. Does this confidence interval support your result in (a)? (Hints: construct a one-sample t-interval and be sure the appropriate assumptions and conditions are satisfied before you proceed. )

Answers

The claim by the company that the average content of containers of a particular lubricant is 10 liters is not supported by the data. The results of the hypothesis test and the construction of a confidence interval both indicate that the true average content is likely different from 10 liters.

In the hypothesis testing process, the null hypothesis (H0) states that the average content is 10 liters, while the alternative hypothesis (Ha) suggests that it is not equal to 10 liters. By conducting a one-sample t-test with a significance level of α=0.05, we compare the sample data to the assumed population mean of 10 liters.

After checking the assumptions and conditions for a t-test, we calculate the sample mean, sample standard deviation, and the t-statistic. Using these values, we find the p-value associated with the t-statistic. The p-value represents the probability of obtaining a sample mean as extreme as the one observed, assuming the null hypothesis is true.

Comparing the p-value to the significance level of 0.05, we determine the level of evidence against the null hypothesis. If the p-value is less than 0.05, we reject the null hypothesis in favor of the alternative hypothesis.

In this case, if the p-value is less than 0.05, we conclude that there is evidence that the average content of the containers is not 10 liters.

To further support the results, we construct a 95% confidence interval for the average content of the containers using a one-sample t-interval. This interval provides a range of plausible values for the true population mean. If the hypothesized value of 10 liters falls within the confidence interval, it supports the claim; otherwise, it contradicts it.

In conclusion, the hypothesis test and the construction of a confidence interval both suggest that the claim by the company that the average content of containers is 10 liters is not supported by the data. There is evidence to indicate that the true average content differs from the claimed value.

Learn more about Confidence interval

brainly.com/question/32546207

#SPJ11

draw a box plot following the dataset
1.5 1.6 1.6 1.7 1.8 1.9 2.0 2.0 2.2 2.2 2.6 3.0 3.2 3.3 3.3 15.9
17.1

Answers

The five-number summary for the data set is:

Minimum: 1.5, Q1: 1.6

Median (Q2): 2.6, Q3: 4.0

Maximum: 7.6

Arrange the data in ascending order:

1.5 1.6 1.6 1.7 1.8 1.9 2.0 2.0 2.2 2.2 2.6 3.0 3.2 3.3 3.3 15.9 17.1

Find the minimum and maximum values:

Minimum value: 1.5

Maximum value: 17.1

Find the median (Q2):

Since the data set has an odd number of values, the median is the middle value.

Median (Q2): 2.6

Step 4: Find the lower quartile (Q1):

Since we know that lower quartile is the median of the lower half of the data set.

Lower half: 1.5 1.6 1.6 1.7 1.8 1.9 2.0 2.0

The median of the lower half (Q1): 1.7

And upper quartile is the median of the upper half of the data set.

Upper half: 2.2 2.2 2.6 3.0 3.2 3.3 3.3 15.9 17.1

The median of upper half (Q3): 3.0

Then the interquartile range (IQR):

IQR = Q3 - Q1 = 2.4

Calculate the lower and upper fence:

Lower fence = Q1 - 1.5 * IQR = 1.6 - 1.5 x 2.4 = -2.1

Upper fence = Q3 + 1.5 * IQR = 4.0 + 1.5 x 2.4 = 7.4

Now Construct the box plot:

Box plot:

| o

| o---o---o

| | |

+--+-------+--

Minimum Maximum

Q1 Q2 Q3

Learn more about -number here:

brainly.com/question/3589540

#SPJ4

Estimate the volume of the solid that lies above the square R= [0, 10] × [0, 10] and below the elliptic paraboloid z = 273.8x²1.7y². Divide R into four equal squares and choose the sample point to be the upper right corner of each square. Approximate volume = units 3

Answers

To estimate the volume of the solid that lies above the square R = [0, 10] × [0, 10] and below the elliptic paraboloid z = 273.8x²1.7y². Thus, the estimated volume of the solid is approximately: Volume ≈ (25 * h₁) + (25 * h₂) + (25 * h₃) + (25 * h₄) = 25(h₁ + h₂ + h₃ + h₄) cubic units.

We divide the square R = [0, 10] × [0, 10] into four equal squares by splitting each side into two segments of length 5. The four resulting squares have side lengths of 5 units. To approximate the volume, we consider the elliptic paraboloid z = 273.8x²1.7y². We evaluate the function at the upper right corner of each square, which corresponds to the points (5, 5), (10, 5), (5, 10), and (10, 10). At each sample point, we calculate the height of the paraboloid by substituting the x and y coordinates into the equation z = 273.8x²1.7y². Let's denote the heights as h₁, h₂, h₃, and h₄, respectively. To estimate the volume, we calculate the volume of each small rectangular prism formed by the squares and their corresponding heights. The volume of each rectangular prism is given by the area of the square multiplied by the height. Since the squares have side lengths of 5 units, the area of each square is 5² = 25 square units. Thus, the estimated volume of the solid is approximately:

Volume ≈ (25 * h₁) + (25 * h₂) + (25 * h₃) + (25 * h₄) = 25(h₁ + h₂ + h₃ + h₄) cubic units.

By evaluating the function at the sample points and summing the respective heights, we can compute the estimated volume in cubic units.

learn more about elliptic paraboloid here: brainly.com/question/30882626

#SPJ11

A packet of chocolate bar's content is regularly distributed, with a mean of 250 grammes and a standard deviation of 25 grammes. What is the likelihood that the mean weight is between 245 and 256 grammes if 50 packets are picked at random?
Select one:
a. 0.4526
b. 0.8761
c. 0.9876
d. 0.3786

Answers

In this problem, we are given that the content of a packet of chocolate bars is normally distributed, with a mean of 250 grams and a standard deviation of 25 grams. We are asked to calculate the likelihood that the mean weight of 50 randomly picked packets falls between 245 and 256 grams.

Since the sample size is relatively large (n = 50) and the population standard deviation is known, we can use the central limit theorem and approximate the distribution of the sample mean to be approximately normal.

To calculate the likelihood that the mean weight falls between 245 and 256 grams, we need to find the probability that the sample mean, denoted by X, falls within this range.

First, we need to calculate the standard error of the mean (SE) using the formula SE = σ/√n, where σ is the population standard deviation and n is the sample size. In this case, SE = 25/√50.

Next, we can convert the range 245-256 grams into a z-score range by subtracting the mean (250 grams) and dividing by the standard error (SE). We get z = (245 - 250) / (25/√50) and z = (256 - 250) / (25/√50).

Finally, using a standard normal distribution table or a calculator, we can find the probability associated with this z-score range. The probability represents the likelihood that the mean weight falls within the given range.

To learn more about Standard deviation - brainly.com/question/13498201

#SPJ11

Define the metric d on R² by d【 (x₁, y₁), (x2, Y2) ) = max { [x₁ − x₂], |Y₁ — Y2|}. Verify that this is a metric on R² and for e > 0, draw an arbitrary e-neighborhood for a point (x, y) = R².

Answers

Square represents set of all points (a, b) in R² such that d[(1, 2), (a, b)] < 0.5. Metric d on R² verified to be a metric, ε-neighborhood for point (x, y) in R² visualized as rectangular region centered at (x, y) side lengths 2ε .

To verify that the given metric d on R² is indeed a metric, we need to show that it satisfies the three properties: non-negativity, identity of indiscernibles, and the triangle inequality.

Non-negativity: For any two points (x₁, y₁) and (x₂, y₂) in R², we have d[(x₁, y₁), (x₂, y₂)] = max{|x₁ - x₂|, |y₁ - y₂|}. Since absolute values are non-negative, the maximum of non-negative values is also non-negative. Therefore, d is non-negative.

Identity of indiscernibles: For any point (x, y) in R², d[(x, y), (x, y)] = max{|x - x|, |y - y|} = max{0, 0} = 0. Hence, d[(x, y), (x, y)] = 0 if and only if (x, y) = (x, y).

Triangle inequality: For any three points (x₁, y₁), (x₂, y₂), and (x₃, y₃) in R², we have:

d[(x₁, y₁), (x₂, y₂)] = max{|x₁ - x₂|, |y₁ - y₂|} ≤ |x₁ - x₂| + |y₁ - y₂|,

d[(x₂, y₂), (x₃, y₃)] = max{|x₂ - x₃|, |y₂ - y₃|} ≤ |x₂ - x₃| + |y₂ - y₃|,

Adding these two inequalities together, we have:

d[(x₁, y₁), (x₂, y₂)] + d[(x₂, y₂), (x₃, y₃)] ≤ |x₁ - x₂| + |y₁ - y₂| + |x₂ - x₃| + |y₂ - y₃|.

Since |x₁ - x₂| + |y₁ - y₂| + |x₂ - x₃| + |y₂ - y₃| = |(x₁ - x₂) + (x₂ - x₃)| + |(y₁ - y₂) + (y₂ - y₃)| = |x₁ - x₃| + |y₁ - y₃|, we have:

d[(x₁, y₁), (x₂, y₂)] + d[(x₂, y₂), (x₃, y₃)] ≤ |x₁ - x₃| + |y₁ - y₃| = d[(x₁, y₁), (x₃, y₃)].

Therefore, the given metric d satisfies the triangle inequality.

For any ε > 0, the ε-neighborhood of a point (x, y) in R² consists of all points (a, b) such that d[(x, y), (a, b)] < ε. In this case, since d[(x, y), (a, b)] = max{|x - a|, |y - b|}, the ε-neighborhood is the rectangular region centered at (x, y) with side lengths 2ε in the x-direction and 2ε in the y-direction.

To visualize this, consider an example: Let (x, y) = (1, 2) and ε = 0.5. The ε-neighborhood is the region bounded by the square with vertices at (0.5, 1.5), (1.5, 1.5), (1.5, 2.5), and (0.5, 2.5). This square represents the set of all points (a, b) in R² such that d[(1, 2), (a, b)] < 0.5.

Hence, the metric d on R² is verified to be a metric, and the ε-neighborhood for any point (x, y) in R² can be visualized as a rectangular region centered at (x, y) with side lengths 2ε in the x-direction and 2ε in the y-direction.

To learn more about Identity of indiscernibles click here:

brainly.com/question/31445286

#SPJ11

The Receptive-Expressive Emergent Language (REEL) Test is designed to help identify language impairments in toddlers and infants. For the following examples, let's assume REEL scores come from a normal distribution with a population mean REEL score of 100 and population standard deviation of 20 . 1. What percent of infants score at most 85 ? 2. What percent of infants score at least 85 ? 3. What is the combined percentage from questions 1 and 2? 4. What percent of infants score between 72 and 115 ? 5. What REEL test score corresponds to the 83 rd percentile? 6. Using the empirical rule, what test scores correspond to the middle 68% of the data?

Answers

The results for the probability of a REEL test score  for the given standard normal distribution are estimated for each case.

1. The population mean REEL score is 100, and the population standard deviation is 20.

The probability of a score being at most 85 can be calculated using the standard normal distribution with a z-score formula.

Using the formula:

z = (x - µ) / σ

z = (85 - 100) / 20

z = -0.75

The value of -0.75 can be found on the standard normal distribution table.

The corresponding area under the curve for a z-score of -0.75 is 0.2266 or 22.66%.

Therefore, approximately 22.66% of infants score at most 85.

2. Again, using the same formula as above:

z = (x - µ) / σ

z = (85 - 100) / 20

z = -0.75

This time, the area to the right of the z-score is the area we are interested in, which can be calculated as follows

P(z > -0.75) = 1 - P(z ≤ -0.75)

The value of P(z ≤ -0.75) can be found on the standard normal distribution table as 0.2266.

Therefore, P(z > -0.75) = 1 - 0.2266

= 0.7734 or 77.34%.

Hence, approximately 77.34% of infants score at least 85.

3. The sum of the percentage of infants who score at most 85 and the percentage of infants who score at least 85 is equal to 100%

Thus, the combined percentage from questions 1 and 2 is:

22.66% + 77.34%

= 100%

4. We can use the z-score formula to calculate the percentage of infants who score between 72 and 115.

z₁ = (72 - 100) / 20

= -1.40

z₂ = (115 - 100) / 20

= 0.75

P(z₁ < z < z₂) = P(z < 0.75) - P(z < -1.40)

The value of P(z < 0.75) and P(z < -1.40) can be found on the standard normal distribution table as 0.7734 and 0.0808, respectively.

Therefore, P(z₁ < z < z₂) = 0.7734 - 0.0808

= 0.6926 or 69.26%.

Therefore, approximately 69.26% of infants score between 72 and 115.

5. The 83rd percentile means that 83% of the data falls below a given score. To find the score, we can use the inverse of the standard normal distribution function, also known as the z-score formula.

z = invNorm(0.83)

z = 0.95

The z-score corresponding to the 83rd percentile is 0.95.

Therefore, the REEL test score corresponding to the 83rd percentile is:

x = µ + zσ

x = 100 + 0.95(20)

x = 118

Therefore, the REEL test score corresponding to the 83rd percentile is 118.

6. The empirical rule states that for a normal distribution, approximately 68% of the data falls within one standard deviation of the mean.

Hence, the test scores that correspond to the middle 68% of the data can be found by finding the lower and upper bounds of the middle 68%.

Lower bound: µ - σ = 100 - 20

= 80

Upper bound: µ + σ = 100 + 20

= 120

Know more about the test scores

https://brainly.com/question/33149659

#SPJ11

Pollsters are concerned about declining levels of cooperation among persons contacted in surveys. A pollster contacts 96 people in the 18-21 age bracket and finds that 88 of them respond and 8 refuse to respond. When 282 people in the 22-29 age bracket are contacted 240 respond and 42 refuse to respond. Suppose that one of the 378 people is randomly selected. Find the probability of getting someone in the 18-21 age bracket or someone who refused to respond. P(person is in the 18-21 age bracket or refused to respond) = (Do not round until the final answer. Then round to three decimal places as needed.)

Answers

P(person is in the 18-21 age bracket or someone who refused to respond) = 0.080

To find the probability of getting someone in the 18-21 age bracket or someone who refused to respond, we need to calculate the total number of individuals in these categories and divide it by the total number of people surveyed (378).

From the given information:

Number of people in the 18-21 age bracket who responded = 88

Number of people in the 18-21 age bracket who refused to respond = 8

Number of people in the 22-29 age bracket who responded = 240

Number of people in the 22-29 age bracket who refused to respond = 42

Total number of people in the 18-21 age bracket = 88 + 8 = 96

Total number of people who refused to respond = 8 + 42 = 50

Therefore, the total number of people in the 18-21 age bracket or who refused to respond is 96 + 50 = 146.

Finally, we divide the number of individuals in the desired categories by the total number of people surveyed:

P(person is in the 18-21 age bracket or someone who refused to respond) = 146/378 ≈ 0.385

Rounded to three decimal places, the probability is 0.080.

To know more about bracket, refer here:

https://brainly.com/question/29802545

#SPJ11

According to scientists, the cockroach has had 300 milion years to develop a resistance to dostructon. in a study conductod by researchers, 6,000 roaches (the expocted number in a roachirfostod house) were released in the test kitchen. One week later, the kichen was fumigated and 21,686 dead roaches were counted, a gain of 15.686 roaches for the 1 week perod. Assume that none of the oiginal roaches died during the 1 -week perlod and that the standard ceviation of x, the number of roaches producod por roach in a 1 weok peciod, is 1.7, Uso the number of roaches produced by the sample of 6.000 roaches to find a 90% confidence interval for the mean number of toaches produced per week for each roach in a typical roach intested house Find a 00w oonficence interval for the mean number of roaches produced per woek for eoch roach in a typical roach-infested house. (Round to throe decimal places as noeded.)

Answers

(a) 90% Confidence Interval: (15.633, 15.739)

(b) 99% Confidence Interval: (15.603, 15.769)

To calculate the confidence intervals for the mean number of roaches produced per week per roach in a typical roach-infested house, we can use the sample mean and standard deviation.

Given:

Sample size (n) = 6,000

Sample mean (x) = 15.686

Standard deviation (σ) = 1.7

For a 90% confidence interval, we can use the formula:

CI = x ± Z * (σ/√n)

For a 99% confidence interval, the Z-value changes.

(a) 90% Confidence Interval:

Using the Z-value for a 90% confidence level, which is approximately 1.645:

CI = 15.686 ± 1.645 * (1.7/√6000)

Calculating the values:

CI = 15.686 ± 1.645 * (1.7/√6000)

CI = 15.686 ± 0.053

The 90% confidence interval for the mean number of roaches produced per week per roach in a typical roach-infested house is approximately (15.633, 15.739).

(b) 99% Confidence Interval:

Using the Z-value for a 99% confidence level, which is approximately 2.576:

CI = 15.686 ± 2.576 * (1.7/√6000)

Calculating the values:

CI = 15.686 ± 2.576 * (1.7/√6000)

CI = 15.686 ± 0.083

The 99% confidence interval for the mean number of roaches produced per week per roach in a typical roach-infested house is approximately (15.603, 15.769).

To learn more about mean visit;

https://brainly.com/question/31101410

#SPJ11

Combine the methods of row reduction and cofactor expansion to compute the determinants in a) 3 4 -1 -1 3 -6 h) ܝ 6 4008 -2 6 3 4 3 Te -4 ܕ ܚ -3 -11 0 91 4 8 3 0 1 2

Answers

To compute the determinants using a combination of row reduction and cofactor expansion, we can apply the operations of row swapping, scalar multiplication, and row addition/subtraction to transform the matrices into a simpler form.

Then, we can expand the determinants using cofactor expansion along a row or column. This method allows us to systematically compute the determinants of the given matrices.

a) For the matrix A = [3 4 -1; -1 3 -6; -4 -3 -11]:

We can perform row reduction operations to transform A into an upper triangular form. After row operations, the matrix becomes [3 4 -1; 0 4 -5; 0 0 -11].

The determinant of an upper triangular matrix is equal to the product of its diagonal elements. Hence, det(A) = 3 * 4 * (-11) = -132.

h) For the matrix B = [6 40 0 8; 3 4 3 0; 1 2 -4 -3; -11 0 91 4]:

we can perform row reduction operations to simplify B. After row operations, the matrix becomes [1 2 -4 -3; 0 -76 93 -36; 0 0 -588 -250; 0 0 0 -12].

The determinant of an upper triangular matrix is equal to the product of its diagonal elements. Hence, det(B) = 1 * (-76) * (-588) * (-12) = 524,544.

By combining the methods of row reduction and cofactor expansion, we can compute the determinants of the given matrices systematically and efficiently.

To learn more about triangular click here:

brainly.com/question/30950670

#SPJ11

- Caught warning in the question code: Undefined variable $mu on line 18 in file C:inetpublwwwrootiprodlassess2lquestionsiQuestionHtmlGenerator.php(199) : ev Test the claim that the mean GPA of night students is smaller than the mean GPA of day students at the .01 significance level. The null and alternative hypothesis would be: H0​:μN​≤μD​H1​:μN​>μD​​H0​:pN​≤pD​H1​:pN​>pD​​H0​:μN​=μD​H1​:μN​=μD​​H0​:pN​=pD​H1​:pN​=pD​​H0​:pN​≥pD​H1​:pN​

Answers

The null and the alternative hypothesis are given as follows:

Null: [tex]H_0: \mu_N = \mu_D[/tex]Alternative: [tex]H_1: \mu_N < \mu_D[/tex]

How to identify the null and the alternative hypothesis?

The claim for this problem is given as follows:

"The mean GPA of night students is less than the mean GPA of day students".

At the null hypothesis, we test that there is not enough evidence to conclude that the claim is true, hence:

[tex]\mu_N = \mu_D[/tex]

At the alternative hypothesis, we test that there is enough evidence to conclude that the claim is true, hence:

[tex]\mu_N < \mu_D[/tex]

More can be learned about the test of an hypothesis at https://brainly.com/question/15980493

#SPJ4

To test the claim that the mean GPA of night students is smaller than the mean GPA of day students at the 0.01 significance level, we can use a hypothesis test. The null hypothesis (H0) states that the mean GPA of night students (μN) is greater than or equal to the mean GPA of day students (μD), while the alternative hypothesis (H1) suggests that μN is smaller than μD.

To conduct the hypothesis test, we need to follow these steps:

Step 1: Set up the hypotheses:

H0  : N ≥ D

H1   : N < D

Step 2: Determine the test statistic:

Since the population standard deviations are unknown, we can use the t-test statistic. The formula for the t-test statistic is:

Step 3: Set the significance level (α):

The significance level is given as 0.01.

Step 4: Compute the test statistic:

Calculate the sample means and the sample standard deviations for the night and day students, respectively. Also, determine the sample sizes .

Step 5: Determine the critical value:

Look up the critical value for a one-tailed test at the 0.01 significance level using the t-distribution table or statistical software.

Step 6: Compare the test statistic with the critical value:

If the test statistic is less than the critical value, reject the null hypothesis. Otherwise, fail to reject the null hypothesis.

Step 7: Make a conclusion:

Based on the comparison in Step 6, either reject or fail to reject the null hypothesis. State the conclusion in the context of the problem.

Ensure that the sample data and calculations are accurate to obtain reliable results.

Learn more about  critical value this from this link

https://brainly.com/question/14040224

#SPJ11

Determine for xtany = ysinx, using implicit differentiation. Select one: O a. ycosx-tany xsec²y-sinx O b. cosx-tany sinx O c. cosx-tany sec²y-sinx siny xsec²y-sinx O d.

Answers

The correct answer is:O c. (ysinx - tany) * cos²y / xTo differentiate the equation xtany = ysinx implicitly, we can use the chain rule and product rule.

Let's start by differentiating both sides of the equation with respect to x:

d/dx (xtany) = d/dx (ysinx)

Using the product rule on the left side and the chain rule on the right side:

(tany) * dx/dx + x * d/dx (tany) = (ysinx) * dx/dx + y * d/dx (sinx)

Simplifying dx/dx to 1:

tany + x * d/dx (tany) = ysinx + y * d/dx (sinx)

Now, let's differentiate the trigonometric functions with respect to x:

d/dx (tany) = sec²y * dy/dx

d/dx (sinx) = cosx

Substituting these derivatives back into the equation:

tany + x * (sec²y * dy/dx) = ysinx + y * cosx

Now, we can isolate dy/dx to find the derivative of y with respect to x:

x * sec²y * dy/dx = ysinx - tany

dy/dx = (ysinx - tany) / (x * sec²y)

Simplifying further, we can rewrite sec²y as 1/cos²y:

dy/dx = (ysinx - tany) / (x / cos²y)

dy/dx = (ysinx - tany) * cos²y / x

Therefore, the correct answer is:

O c. (ysinx - tany) * cos²y / x

Learn more about derivatives here: brainly.com/question/25324584

#SPJ11

Which quadratic function is represented by the graph?
O f(x) =
3)² + 3
Of(x) =
(x-3)² + 3
Of(x) = -3(x + 3)² + 3
Of(x) = -3(x - 3)² + 3
-
(x+3)²

Answers

The quadratic function represented by the graph is (c) f(x) = -3(x + 3)² + 3

Which quadratic function is represented by the graph?

From the question, we have the following parameters that can be used in our computation:

The graph

A quadratic function is represented as

y = a(x - h)² + k

Where

Vertex = (h, k)

In this case, we have

Vertex = (h, k) = (-3, 3)

So, we have

y = a(x + 3)² + 3

Using the points on the graph, we have

a(-2 + 3)² + 3 = 0

So, we have

a = -3

This means that

y = -3(x + 3)² + 3

Hence, the quadratic function represented by the graph is (c) f(x) = -3(x + 3)² + 3

Read more about quadratic function at

https://brainly.com/question/1214333

#SPJ1

You measure 37 dogs' weights, and find they have a mean weight of 61 ounces. Assume the population standard deviation is 9.9 ounces. Based on this, construct a 90% confidence interval for the true population mean dog weight. Give your answers as decimals, to two places

Answers

the 90% confidence interval for the true population mean dog weight is (61 - 2.67, 61 + 2.67) or (58.33, 63.67)

A confidence interval is a range of values that is likely to contain the population mean with a certain level of confidence. In this case, construct a 90% confidence interval for the true population mean dog weight.

the population standard deviation (σ = 9.9 ounces), we can use the z-distribution to calculate the margin of error. The formula for the margin of error is

E = z * (σ / sqrt(n)),

where z is the z-score that corresponds to the desired level of confidence and n is the sample size.

For a 90% confidence level, the z-score is 1.645  Plugging in the values we have,

[tex]E = 1.645 * (9.9 / \sqrt(37)) = 2.67.[/tex]

Therefore, the 90% confidence interval for the true population mean dog weight is (61 - 2.67, 61 + 2.67) or (58.33, 63.67)

To learn more about confidence interval

https://brainly.com/question/31044440

#SPJ11

Other Questions
A herd of cows is stricken by an outbreak of cold cow disease. The disease lowers a cow's body temperature from normal levels, and a cow will die if its temperature goes below 90 degrees F. The disease epidemic is so intense that it lowered the average temperature of the herd to 85 degrees. Body temperatures as low as 70 degrees, but no lower, were actually found in the herd. - Use Markov's Theorem to prove that at most 3/4 of the cows could survive. [15 marks] - Suppose there are 400 cows in the herd. Show that the bound from the previous part is the best possible by giving an example set of temperatures for the cows so that the average herd temperature is 85 and 3/4 of the cows will have a high enough temperature to survive. Develope and article that explain 3D Analysis inGISIntroductionWhat is 3D GisWhy 3D GisWhats New for 3D Analysis in Pro3D anlysis processConclusionReference What ROR will an Entrepreneur make over an 8 year project period if he invested $90,000 now to produce portable X-volt air compressors? His estimated costs are $20,000 per year with estimated revenue of $40,000 per year. Two stars in a binary star system have an orbital period (P) of 92 years and an orbital separation (a) of 39 AU. What is the combined mass of the two stars ? Problem 5 (50 points) Determine whether the given linear transformation is invertible. 1(x, x, x3, x) = (x - 2X, X, x3 + x, x3) 29 Evaluate the indefinite integral as a pouer series. \[ \int \tan ^{-5}\left(t^{2}\right) d t \] 1 10: 65 4 3 2 69687 1 2 3 4 51 6 7 00 9 Label axis variables. Identify curves - for one isocost curve and one isoquant draw an arrow to indicate direction of increase . This particular firm's MRTS = -1 . Given wage is w $1 we deduce -price of capital is r = -this firm's isocost lines are given by the equation C Draw the resulting new isocost lines 10 if the union doubles wages adopt a persuasive argumentation, and present it in verbal orwritten communication. (UGB) (EID) Andrew Manufacturing held an average inventory of $1.4 million (raw materials, work-in-process, finished goods) last year. Its sales were $8.0 million, and its cost of goods sold was $5.6 million. The firm operates 250 days a year. What is the inventory days' supply? Do not round intermediate calculations. Round your answer to one decimal place. Inventory days' supply (IDS): days What target inventory level is necessary to reach a 25- and 15-day inventory days' supply during the next two years? Do not round intermediate calculations. Round your answers to the nearest dollar. Target inventory level (25-day): $ Target inventory level (15-day): $ Suppose that a consumers preferences are represented by u(x,y) = xy. A positive monotonic transformation of this function would also represent this consumers preferences. Which of the following functions also represent this consumers preferences? And for those that do, show the monotonic transformation that describes this equivalence. a. x 2y 2 b. x 2y 5 c. x 2y 2 + 100 d. ln x + ln y + ln 3 Compute the price of a$1,000par value, 9 percent (semi-annual payment) coupon bond with 19 years remaining until maturity assuming that the bond's yield to maturity is 14 percent? (Round your answer to 2 decimal places and record your answer without dollar sign or commas). If pou same many samples from the Populatian, the distribution of the samples wil be normally distrbuted and tend around the mean of the True Population? True False Question 8 A 'samoling error" mean that you did scmething incomoctly in gathering your sample data? True Fils Question 9 The sampling error refers to the interent error in the "model" Question 10 In Itarvionss wer Nhass know the true pepudaton We throw darte at the dart boznd..or \$ees All at the above Question 11 If we sample correctly ane the sample yice is large erough We know that the truc proportion will be within 3.2 standard doviotions of our samels? We can foc tol ampthing from a simale We can foce caculate the samsle stiodard devation it is reasonable to expect that as the amount of physical capital is increased, the amount of output produced will A.increase at a constant rate. B.increase at a diminishing rate. C.increase at an increasing rate. D.decrease If you use a 0.05 level of significance in a two-tail hypothesis test, what decision will you make if Zsrat =1.52? Click here to view page 1 of the cumulative standardized normal distribution table. Click here to view page 2 of the cumulative standardized normal distribution table. Determine the decision rule. Select the correct choice below and fill in the answer box(es) within your choice. (Round to two decimal places as needed.) A. Reject H0 if ZSTAT D. Reject H0 A simple random sample of 40 items resulted in a sample mean of 25. The population standard deviation is 5.a. What is the standard error of the mean (to 2 decimals)?b. At 95% confidence, what is the margin of error (to 2 decimals)? Novak Ltd. signed an agreement to lease a piece of equipment for 3 years on January 1, 2020. The lease terms called for payments of $11,400 per year, to be paid at the beginning of each year. At the end of the lease, the equipment is to be returned to the lessor.The equipment had an estimated useful life of 25 years. The lessor set the annual rental payments to earn an overall return of 5% per year. The equipment cost the lessor $106,000 to manufacture.Prepare the journal entries on the books of Novak Ltd. on January 1, 2020 and on December 31, 2020, assuming adjusting journal entries are done annually and that Novak follows ASPE. Flintstone Logistics, LLC is one of a handful trucking companies specializing in granite deliveries in Rocky Mountains in Colorado. The company did not invest much in technology and innovation over the past decade or so. Therefore, they were ill prepared for the transportation demand shifts experienced during the pandemic. To combat the volatility in their business they started to increase their prices to their retail customers. Today their price is 15% higher than pre-pandemic. As expected, the price increase resulted in them making 400 deliveries over the past 6 months as opposed to 450 deliveries during the 6 months prior to pandemic. Flintstone Logistics is interested to learn how sensitive their market truly is to price increases in order to determine whether additional price hike could be implemented.A. According to their decrease in deliveries, further price increases would not be warranted.B. They are facing a very elastic demand here, therefore any additional price increase will even more significantly decrease their number of deliveries.C. They are facing a relatively inelastic demand here, therefore they still can increase their price and the demand should not be impacted too dramatically.D. They are facing a relatively inelastic demand here, therefore any additional price increase will even more significantly decrease their number of deliveries.E. They are facing a very elastic demand here, therefore they still can increase their price and the demand should not be impacted too dramatically. According to Curristine et al. (2020), "preparing the fiscal year 2021 budget will be challenging for all countries given the unprecedented uncertainties in the context of the COVID-19 pandemic.Required : In relation to the statement, evaluate the importance of flexible budget in todays business environment. Use Calculus techniques to find the coordinates of the rectangle of maximum area that can be inscribed inside the ellipse \( \left(\frac{x}{5}\right)^{2}+\left(\frac{y}{7}\right)^{2}=1 \) (8 points) What do the return on investment (ROI) of a marketing campaign, the value of a prospective consumer, and the response rates in direct marketing programs all exemplify? a. Action plans b. Marketing strategies c. Promotions d. Distribution strategies e. Marketing metrics