The introduction of money market substitutes for basic checking accounts was fueled partially by the Multiple Choice A. relatively high rates of inflation that existed in the late 1970s and early 1980s B. reluctance of many retailers to accept checks. C. high number of bank failures that were occurring in the 1970s. D. higher interest rates banks had to pay on checking accounts.

Every party to a transaction must be informed as soon as practically possible of your agency status.

The initial disclosure, however, is permitted to be oral because the legislation does not call for a written confirmation of the agency disclosure until just before each party is going to sign an offer.

According to Washington law, a broker is required to disclose any important information that is currently known to them but is not immediately visible or discoverable (although there is no independent duty for the broker to investigate).

To know more about Business Law here

https://brainly.com/question/29511482

#SPJ4

While preparing the Cost of Good Sold and Income Statement, the over applied FOH is  is  Subtracted, add back. (B)

When preparing the Cost of Goods Sold (COGS) and Income Statement, the overapplied FOH (Factory Overhead) is subtracted and then added back.

The overapplied FOH is the amount by which actual factory overhead costs exceed the amount of overhead costs applied to work in progress.

In other words, it is the excess of overhead costs that were budgeted to be incurred during a period, over the actual overhead costs incurred.

When calculating COGS, the overapplied FOH is subtracted from the cost of goods sold to avoid overstating the cost of goods sold and understating the gross profit. Then, in the income statement, the overapplied FOH is added back to arrive at the correct net income.

To know more about Cost of Goods Sold click on the link below:

https://brainly.com/question/24561653#

#SPJ11

The correct option is A. The per-unit cost of production in the economy described is $0.50.

In economics, photo illustration of the connection between product rate and quantity of product that a dealer is inclined and able to supply. The facts plotted at the delivery curve come from the supply schedule, which is a table listing amount furnished at any given charge.

The regulation of supply states that a higher charge results in a better amount supplied and that a decreased charge leads to a lower quantity supplied. deliver curves and supply schedules are tools used to summarize the connection between delivery and rate. The delivery curve appears as a graph with the fee on the vertical axis on the left side and the number of goods on the horizontal axis on the lowest.

To learn more about The supply curve visit here:

brainly.com/question/1915798

#SPJ4

Complete Question:

Suppose that real domestic output in an economy is 100 units, the quantity of inputs is 10, and the price of each input is $5. The per-unit cost of production in the economy described is

Multiple Choice

The amount of cash collected from customers during 2015 by Patnode cannot be estimated.

The amount of cash collected from customers can differ from sales revenue. Sales revenue is a measure of the total value of goods and services that a company has sold. However, not all sales revenue will be collected as cash at the time of sale. For example, customers may purchase goods or services on credit, which means that they will pay for them at a later date. Additionally, some sales may be subject to returns, allowances, or discounts, which can affect the amount of cash that a company collects. Therefore, while the sales revenue of $17,000 in 2015 provides some insight into the level of activity and growth of the company, it does not give a clear picture of the actual cash received from customers. To determine the amount of cash collected, we would need additional information such as the terms of sale, the payment methods used by customers, and the amounts and timing of any adjustments for returns, allowances, or discounts. In conclusion, without more information about the terms of sale and the payment methods used by customers, it is not possible to estimate the amount of cash collected from customers based on the sales revenue of $17,000 in 2015.

To know more about cash:

https://brainly.com/question/15709517

#SPJ4

When both state and federal courts have jurisdiction over a case, this is known as concurrent jurisdiction. In such cases, the plaintiff, or the party initiating the legal action, has the option to choose which court they want to file the case in. If the plaintiff opts for a state court, the defendant, or the party being sued, has the option to remove the case to an appropriate federal district court.

Courts are essential components of the legal system, responsible for interpreting and applying the law, and resolving disputes between parties. In the United States, there are two main types of courts: state courts and federal courts. Each type of court has its own jurisdiction, or the authority to hear certain types of cases.

This removal option is based on the premise that the defendant should have the right to choose a federal forum, if one is available. The defendant must act promptly to remove the case to a federal court, as there are strict time limits for removal. If the defendant fails to remove the case within the prescribed time, the plaintiff's choice of a state court will be honored, and the case will proceed in state court.

It is important to note that not all cases are eligible for removal to federal court. The defendant must satisfy certain criteria for removal, such as the existence of a federal question or diversity of citizenship between the parties.

To know more about concurrent jurisdiction refer to-brainly.com/question/513871#

#SPJ11

Cash, prepaid rent, and accounts receivable are the options that only contain accounts that are shown in the asset portion of the balance sheet.

A balance sheet is a financial statement that provides a detailed summary of the financial position of a company, an individual, or both at a certain point in time. As a result, it often consists of capital, debt, equity, assets, and liabilities. Due to the fact that accounts receivable represent the payment that a business entity would receive from its clients for goods or services obtained on credit, they are regarded as current assets in financial accounting. Additionally, because they provide value to a corporate organization, cash, rent, and accounts receivable are listed in the current assets portion of the balance sheet.

Learn more about A balance sheet here:

https://brainly.com/question/19566672

#SPJ4

A developer becomes accountable for the value of a product backlog item selected for a Sprint as soon as it is added to the Sprint backlog.

The Sprint backlog is a dynamic, living artifact that represents the Development Team's plan for the current Sprint.

The Development Team is responsible for delivering the value promised in the Sprint backlog and ensuring that the product backlog items are "Done" by the end of the Sprint.

This includes ensuring that the work meets the definition of "Done" and is of high quality, ready for release. The Development Team's accountability for the value of a product backlog item continues until the end of the Sprint, and it is up to the Development Team to continuously monitor and adjust their plan as necessary to deliver the desired value.

To know more about Sprint backlog click on the link below:

https://brainly.com/question/30089881#

#SPJ11

There is no specific location that is more attractive for mining due to rising metal prices.

The pursuit of mining depends on various factors such as the availability of minerals, ease of access, environmental regulations, and local infrastructure.

For example, a location with abundant mineral deposits but stringent environmental regulations may not be as attractive for mining as a location with more favorable regulations.

Additionally, factors such as transportation costs, labor availability, and proximity to markets also play a role in determining the viability of mining in a specific location.

The rising prices of metals may make some previously uneconomic mining sites more economically viable, but the specific location would depend on the above-mentioned factors.

For more questions like Mining click the link below:

https://brainly.com/question/30199407

#SPJ4

A supply chain involves multiple companies working together competitively and collaboratively to produce, transport, and sell products to consumers.

The present invention relates generally to methods and systems for supply chain management. In particular, the present invention searches for optimal supply chain parameter values ​​and supply chain policies for a range of key performance indicators including inventory, inventory time, number of misdeliveries, and cost. A supply chain involves multiple companies working together competitively and collaboratively to produce, transport, and sell products to consumers.

The supply chain extends from the initial supplier of raw materials, often through the transportation and assembly of raw materials in warehouses and storage tanks, to the manufacturing or assembly centers that combine two or more raw materials, to the processes that lead to intermediate or finished products. up to.

Storage of such product pallets or other devices, storage of such product, transportation to intermediate distribution centers, transportation from such centers to other distribution centers, and thence to retailers or end users.

Know more about supply chain here:

https://brainly.com/question/29318233

#SPJ4

Depreciation expense reduces net income but increases cash flow. Income taxes, cash sales, and interest expense all reduce both net income and cash flow.

Depreciation is a non-cash expense that spreads the cost of a fixed asset over its useful life. Although it reduces net income on the income statement, it does not affect cash flow as it is an accounting adjustment rather than a real outflow of cash. On the other hand, an increase in cash flow occurs because the company has not actually spent the cash in the current period, but has only recorded an expense for accounting purposes. Depreciation is a method of allocating the cost of a long-term asset over its useful life. The idea behind depreciation is to match the cost of the asset with the revenue it generates. When a company purchases a long-term asset, such as machinery or equipment, it incurs an expense, but it does not pay the full cost in one lump sum. Instead, the cost is spread out over a number of years, usually through annual depreciation expenses. The depreciation expense reduces net income on the company's income statement, but it does not reduce the company's cash balance.  On the other hand, the reduction in net income caused by the depreciation expense increases the company's cash flow. This is because the cash flow statement reflects the actual inflows and outflows of cash during the period, whereas the income statement reflects the company's financial performance over the period. In contrast, income taxes, cash sales, and interest expense all have a direct impact on the company's cash balance. Income taxes are a real outflow of cash, as the company must pay its tax bill to the government.

Cash sales increase the company's cash balance, as it receives cash from its customers. Interest expense is the cost of borrowing money and is a real outflow of cash, as the company must make interest payments to its creditors.

To know more about Depreciation click here:

brainly.com/question/30024295

#SPJ4

When the markets for digital cameras and smartphones began to emerge, Eastman Kodak did not make the necessary improvements. Entropy's effects on the business were disastrous.

Entropy is a concept that financial analysts and market technicians use to determine the likelihood that specific expected price actions for a securities or market will actually occur.

Entropy has been studied and debated for a very long time by market analysts and traders. It is used in quantitative analysis to assess the possibility that a security will move in a specific direction or in line with a predetermined pattern. Compared to securities whose prices are typically stable, those with higher volatility have higher entropy.

To know more about company visit:-

https://brainly.com/question/13414268

#SPJ4

The step of the marketing plan developed after a marketer has completed the situation analysis is the "marketing strategy." Here option A is the correct answer.

The marketing plan is a comprehensive document that outlines the steps a marketer will take to achieve a specific set of marketing objectives. It typically includes several key steps, including:

Situation analysis: This step involves conducting a thorough analysis of the market environment, including factors such as consumer demographics, market trends, competition, and economic conditions.

Marketing strategy: After the situation analysis is complete, the marketer will develop a marketing strategy. This will typically involve identifying target markets, determining the unique value proposition of the product or service being marketed, and developing a plan for reaching and engaging with target customers.

BCG matrix: The BCG matrix is a tool used to help prioritize the product portfolio of a company. It plots products or businesses on a matrix based on their relative market share and market growth rate.

Complete question:

what step of the marketing plan is developed after a marketer has completed the situation analysis?multiple choice question.

A - marketing strategy

B - bcg matrix mission statement

C - swot analysis

D - competition analysis

To learn more about marketing strategy

https://brainly.com/question/29376574

#SPJ4

The greatest number of magazines she could purchase in seven days is 6.

Marie has a week after weekly budget of $24

In the event that the cost of a magazine is $4 each

most extreme number of magazines she could purchase in seven days =?

we can work out this by separating absolute spending plan with the cost of magazine that is:

$24 / $4 = $6

Taking on another position, getting back to school, or running into somebody with associations are instances of chances. You will be allowed the opportunity to make the most of these possibilities and travel down specific ways that will assist you with understanding your yearnings. Getting an opportunity is fundamental on the off chance that we want the best for our professions.

Opportunities  are positive outside components that might give an upper hand to an organization.

Learn more about maximum number of magazines:

https://brainly.com/question/13368761

#SPJ4

This question is not complete , here I am attaching the complete question:

Dorothy has a weekly budget of $24, which she likes to spend on magazines and pies. if the price of a magazine is $4 each, what is the maximum number of magazines she could buy in a week?'

The law of increasing opportunity cost helps to explain why ppf’s are typically bowed-outward is True because The law of increasing opportunity cost explains why PPFs are bowed-outward; as more of one good is produced, the opportunity cost increases leading to a more efficient specialization in production.

The law of increasing opportunity cost helps to explain why production possibility frontiers (PPFs) are typically bowed-outward. The law states that as an economy moves from producing one good to producing another, the opportunity cost of producing each additional unit of the second good will increase.

This means that the opportunity cost of producing a good will rise as more resources are devoted to producing it. As a result, the PPF will become increasingly bowed-outward, reflecting the higher opportunity cost of producing additional units of the second good.

This relationship between the law of increasing opportunity cost and the shape of the PPF highlights the trade-offs that economies face in allocating their resources, and helps to explain why it is more efficient for an economy to specialize in producing the good that it can produce at a lower opportunity cost.

To know more about PPF click below:

brainly.com/question/29945082#

#SPJ11

In this question, the per unit cost =20.04 . we can find the cost per unit by dividing the total cost and the total unit produced.

To find the per unit cost of production first we gave to find the total cost

so we multiply the unit of each factor used times its cost

capital = 1*10 = 10

Raw matarial = 5*4 = 20

labour = 4*3 = 12

Total cost = 10+20+12 = 42

then will divide the total cost over total unit produced

so,

Cost per unit = 42/842 = 20.04

To learn more about Unit cost click on the below link

brainly.com/question/13873791

#SPJ4

D. warranty expense and warranty liability are used to record a contingent warranty liability that is probable and estimable but has yet to be fulfilled.

To begin, a contingency occurs when there is a current situation with an undetermined conclusion that will be determined at a later time. This consequence could be either terrible or favorable.

Contingent liability, on the other hand, has a negative effect because it pertains to a future obligation. A contingent liability's accounting treatment is defined by the likelihood of its occurrence and the predictability of its value.

Meanwhile, a warranty responsibility is an example of a contingent liability that refers to an obligation incurred by a corporation as a result of prospective repair or replacement costs for products sold or services done before.

A probable and estimable contingent warranty liability is one that is expected to materialize and can be properly assessed. The warranty must be journalized and included in the financial statements in this scenario.

The acknowledgment of warranty liability and cash is erroneous in this scenario. This is due to the fact that no cash has been paid or received by a corporation in recognition of warranty duty. This transaction's acknowledgment of warranty expense and cash is also wrong.

As previously stated, no money has been paid or received by a corporation to acknowledge warranty duty. Furthermore, for this transaction, the simultaneous recognition of warranty obligation, warranty expense, and cash is inappropriate.

To know more about contingent liability:

https://brainly.com/question/29035187

#SPJ4

Correct question:

What accounts are used to record a contingent warranty liability that is probable and estimable but has yet to be fulfilled?

A. warranty liability and cash

B. warranty expense and cash

C. warranty liability and warranty expense, cash

D. warranty expense and warranty liability

Yes, it is better to mine in a wilderness area than a developed area. The pros and cons of mining both in wilderness area and developed areas are mentioned below -

The decision of whether it is better to mine in a wilderness area or a developed area depends on various factors, including the type of minerals being extracted, the local regulations, and the impact on the environment and communities.

Pros of mining in a wilderness area:

Lower competition for resources: There is often less competition for minerals in wilderness areas, as there is less development and fewer people.

Less regulations: Regulations for mining activities in wilderness areas are typically less strict than in developed areas, making it easier and less expensive to mine.

Cons of mining in a wilderness area:

Environmental impact: Mining activities in wilderness areas can have a significant impact on the environment, including destruction of habitats, soil erosion, and water pollution.

Conflict with conservation efforts: Mining activities in wilderness areas can also conflict with conservation efforts to protect wildlife and ecosystems.

Pros of mining in a developed area:

Access to infrastructure: Developed areas often have established infrastructure, including roads, railroads, and ports, which can make it easier and more efficient to transport minerals.

Stronger regulations: Regulations for mining activities in developed areas are typically stronger and better enforced, reducing the potential environmental impact of mining.

Cons of mining in a developed area:

Competition for resources: There may be more competition for minerals in developed areas, as there are more people and businesses vying for the same resources.

Community impact: Mining activities in developed areas can have a significant impact on local communities, including displacement of residents and negative effects on local businesses.

Know more about Pros and Cons of Mining in wilderness area than a developed area - https://brainly.com/question/23259661

#SPJ4

2nd option is correct. A communication model provides a comprehensive understanding of a system or structure and enables people to understand similar systems or structures.

A communication model helps you identify and understand the components and relationships of the communication process under investigation.

A model is something that is used to follow or imitate. A communication model establishes a standard communication system and provides information to ensure effective communication in a business organization. They are considered from an organizational point of view. Each organization has established its own communication system, largely inspired by common communication models.

A communication model is a conceptual model used to describe human communication processes.

The first formal communication model was formulated by Claude Elwood Shannon in 1948 and introduced and published by Warren Weaver. This model is widely known as the communication model of Shannon and Weaver. It is also called the linear communication model because it takes place in a straight line from the sender to the recipient and is used to inform, persuade, or command.

In this type of communication, information is only sent from one point to another, or to many points at a single point in time.

Know more about communication model here:

https://brainly.com/question/9973830

#SPJ4

Managerial and organizational decision-making can differ across national cultures due to differences in values, beliefs, and norms.

Managerial and organizational decision-making can differ across national cultures due to differences in values, beliefs, and norms. As an example, whereas certain cultures place a high focus on hierarchy and top-down decision-making, others favor a more consensus-driven strategy. While collectivism is valued in some cultures, individualism is prioritized more in others.

The work procedures at Apple may be impacted by these cultural variations in a number of ways. For instance, in cultures where consensus is valued, a hierarchical decision-making structure may result in slower decision-making procedures. Additionally, there may be a stronger emphasis on teamwork and collaboration in cultures where collectivism is valued, which may have an impact on how work is structured and managed.

When operating in multiple nations, global corporations like Apple must recognize and consider cultural differences in their decision-making. They can do this to make sure they can work together, communicate, and make choices with their international partners and staff.

To learn more about decision-making:

https://brainly.com/question/16407152

#SPJ4

Organization, integration, interrelationships, and interrelationships, must be present in a system because A: "A system comprises interrelated parts that together accomplish particular objectives.

Organization, interrelationships, integration, and central objectives must be present in a system because a system is a set of interdependent elements that together accomplish specific objectives. The interrelationships between the parts of a system ensure that they work together effectively, while integration ensures that the system is unified and not divisible into subsystems. The presence of central objectives provides focus and direction for the system, ensuring that it is working towards achieving its intended purpose.

You can learn more about objectives of a company at

https://brainly.com/question/24137753

#SPJ4

This type of joint is known as a Butt Joint. A Butt Joint is a basic and simple wood joint where two pieces of wood are butted together and fastened with screws, nails, or adhesive.

It is the most basic form of wood joint and is commonly used in factory-made furniture, such as shelves and cabinets, where cost and speed of production are important considerations. The strength of the joint depends on the quality and size of the fasteners used and the type of adhesive applied. Butt Joints are relatively easy to make and are a cost-effective solution for many woodworking projects. However, they are not ideal for structural applications as they tend to be weak compared to other joints. A butt joint is a type of woodworking joint where two pieces of wood are joined end to end, with the ends of both pieces touching each other. It is one of the simplest joints to make and is often used for constructing frame-style structures, such as doors and boxes. The strength of the joint relies mainly on glue and sometimes with the help of mechanical fasteners, such as nails or screws. Factory-made furniture refers to furniture that is manufactured in a factory setting using mass-production techniques and assembly-line processes. This type of furniture is usually produced in large quantities to meet the demands of a consumer market and is often sold through retailers or furniture stores. Factory-made furniture is usually made of lower-quality materials and is less expensive than custom-made or handmade furniture. However, advances in technology and production methods have allowed for the creation of high-quality factory-made furniture that is both durable and attractive.

To know more about furniture:

https://brainly.com/question/26837985

#SPJ4

Internet congestion control is almost all based on the Contention - based algorithm. The end-to-end principle means that internet hosts, rather than the network itself, are mostly responsible for congestion control.

Among operating systems as well as protocol stacks underlying computers which are connected to the Internet, there are numerous versions as well as variations of both the algorithm in use.

The congestion window (CWND) in TCP serves as a variables that affects the maximum number of bytes that can be transmitted out at once. The sender keeps track of the congestion window, which prevents a link connecting the sender as well as the receiver from getting overburdened with traffic. Not to be confused with the sliding window the transmitter keeps in place to keep the receiver from becoming overloaded. By making an educated guess about how congested the link is, the congestion window is determined.

To know more about Internet congestion

https://brainly.com/question/19131428

#SPJ4

The practice of Bait and Switch is advertising one product with the intent of persuading customers to buy a more expensive when they arrive at the store.

The term "bait and switch" refers to a situation in which a business advertises a desired or in-demand item to entice customers into the store, then tries to substitute (switch) another, less attractive one. One of the most prevalent types of bait and switch advertising is seen in automotive dealership offerings.

For example, a car dealership may run an advertisement stating that they have a limited quantity of a certain type of motor vehicle that they will offer at an extraordinarily uncommon and low price. The FTC issued a Notice stating that bait and switch sales techniques are unfair or deceptive commercial practices that violate the FTC Act.

To learn more about Bait and Switch advertising, here

https://brainly.com/question/27898600

#SPJ4

The strategy that used by a company by introduction of a lower-priced product by starting to produce its own lower-cost product abroad and importing it is called as outsourcing strategy. Outsourcing has a benefit where outside labor or supplies may be cheaper than in-house options.

In economic and business, Product strategy generally can be described as the high-level plan for developing and marketing a product. Beside that, product strategy also can be described as how the product supports the business strategy and goals, and is brought to life through product roadmaps. There are four major elements of business strategies, such as customer, competitors, makro environment, and also market. Beside that also there are several types of business strategies, such as comparative business strategies, differentiation business strategies, and segmentation business strategies.

Here you can learn more about product strategies brainly.com/question/28788924

#SPJ4

If interest rates rise as the length of the borrowing period increases, the yield curve is described as an upward-sloping or positively sloped yield curve.

This type of yield curve is considered a normal yield curve, and it is typically observed when the economy is growing and the outlook for future interest rates is positive. The upward slope of the yield curve reflects the market's expectation that future interest rates will be higher than current rates, so investors demand higher yields to compensate for the increased risk of holding longer-term bonds. An upward-sloping yield curve is often seen as a sign of a healthy and growing economy, as it indicates that lenders and investors are confident in the future prospects of the economy and are willing to lend money at longer terms.

To learn more about yield curve please click on below link.

https://brainly.com/question/15296760

#SPJ4

The debt to equity ratio is a financial metric used to assess a company's financial leverage and is calculated by dividing total liabilities by shareholder equity.

A higher debt to equity ratio indicates a higher level of financial leverage, while a lower ratio suggests lower leverage and a stronger balance sheet. It is important to note that the debt to equity ratio should be evaluated in conjunction with other financial metrics and ratios to gain a comprehensive understanding of a company's financial health. The debt to equity ratio shows the proportion of a company's financing that comes from debt compared to equity. A high debt to equity ratio indicates that a company is using a significant amount of debt to finance its operations and growth, while a low debt to equity ratio indicates that a company is financing itself primarily through equity. The debt to equity ratio is an important metric for investors as it provides insight into a company's financial health and risk profile.

Learn more about equity  :

https://brainly.com/question/13278063

#SPJ4

a. The market-to-book ratio of Adidas is 1.77 (24.68 / 13.97) and the market-to-book ratio of Nike is 2.86 (41.86 / 14.30).

b. By comparing the two ratios, we can see that the market views Nike as a more valuable company than Adidas. A higher market-to-book ratio means that the market values the company's assets more highly, relative to their book value.

This could be due to the company's perceived higher future growth prospects, stronger brand, or other factors. It is important to note that a high market-to-book ratio does not necessarily mean a company is a good investment, but it is often used as an indicator of market sentiment.

For more questions like Market ratio click the link below:

https://brainly.com/question/28812927

#SPJ4

The amount of output that a completely competitive firm chooses to produce will depend on how much TR surpasses TC and how much profit it wants to maximize.

Total revenue is the total amount of money a seller can earn from offering clients goods or services. P Q, or the purchase price multiplied by the number of goods sold, is the formula for calculating this. A completely competitive company is given a demand curve that is infinitely elastic. In other words, the only price at which it may be sold is the market price. While at any higher price, nobody would buy any quantity, at any lower price, it could sell the same quantity at the existing rate and yet make more money. Total revenue is determined by multiplying the market price by the quantity that the company chooses to produce and sell.

Learn more about Total revenue from

brainly.com/question/16910784

#SPJ4

Brands use several manipulation tactics to attract and retain customers, including scarcity, social proof, anchoring, FOMO (Fear of Missing Out), and framing.

They create a sense of urgency through scarcity, use endorsements to show social proof, manipulate prices through anchoring, create fear of missing out with FOMO, and present information in a way that influences decision-making through framing.

These tactics tap into psychological and emotional triggers to drive sales but can harm brand reputation if used unethically or deceptively.

To know more about  FOMO click on the link below:

https://brainly.com/question/16407152#

#SPJ11

The total capacity of the process is 6 burgers per minute.

The maximum capacity of the process can be calculated as follows:

Grill: 15 patties in 4 minutes = 15 patties / 4 minutes = 3.75 patties per minute.

Platen: 20 buns in 4 minutes = 20 buns / 4 minutes = 5 buns per minute.

Assembly: 1 worker can assemble 1 burger in 10 seconds, so in 1 minute he can assemble 6 burgers.

Counter: 4 workers can give 1 burger to a customer in 1 minute, so in 1 minute they can give 4 burgers x 4 workers = 16 burgers.

To find the total capacity of the process, we need to consider the bottleneck, which is the operation with the lowest output. In this case, the bottleneck is the Assembly with a maximum capacity of 6 burgers per minute.

Learn more about capacity here:

https://brainly.com/question/15158174

#SPJ4