the ionization energy of o2 is 1205 kj/mol . what is the maximum wavelength of light capable of casuing the ionizaiton of o2

If a student accidentally adds deionized water past the calibrated mark on the volumetric flask, he should a) dump the excess solution until the volume is right at the mark.

When performing chemical reactions, it is important that each component or element of the reaction be measured accurately. If any of the components are not measured accurately, then it can result is a false result or no reaction to occur at all.

For adding water to a chemical reaction, often a volumetric flask is used. If you are using deionized water then it is important to add effectively the correct measured value of deionized water. If by mistake more deionized water is added to the volumetric flask, you should dump it until it reaches the right mark.

Although a part of your question is missing, you might be referring to this question:

If a student accidentally adds deionized water past the calibrated mark on the volumetric flask, he should:

a) dump the excess solution until the volume is right at the mark.

b) proceed with the excess amount

c) change the chemical reaction

To learn more about volumetric flask, click here:

https://brainly.com/question/28997155

#SPJ4

The density of methane gas at a pressure of 910 torrs and a temperature of 255K is equal to 0.92 g/L.

The situation of quantity of gas is determined by its volume, pressure, and temperature. The ideal gas law can be demonstrated as the product of the volume and pressure is equal to the product of the gas constant and absolute temperature.

The mathematical representation for an ideal gas can be written as follows:

PV = nRT

PV = (m/M)× RT

(PM)/RT = m/V

D = PM/RT

Where n is the moles, T is the temperature,  V is the volume, and R is the gas constant.

Given, the temperature of the gas, T = 255 K

The pressure of the argon gas, P = 910 torr = 1.19 atm

The molar mass of the methane gas, M = 16 g/mol

Substitute  R, P, M, and T in the ideal gas equation, and we get:

The density of methane gas, D = PM/RT

D = 1.19 ×16/(0.082 × 255)

D = 0.92 g/L

Learn more about ideal gas equation, here:

brainly.com/question/3637553

#SPJ1

The equilibrium reaction that shows the formation of this complex ion from copper (II) ion and aqueous ammonia is Cu²⁺(aq) + 4NH₃(aq) ⇄ [Cu(NH₃)₄]²⁺(aq) Konstanta Formation 5.03x10¹³

When Cu²+ ions are in the presence of ammonia molecules in aqueous solution, a tetrahydrate complex is formed.

K f = K f = [[Cu(NH3)₄]²⁺]/[Cu²⁺][NH3]⁴

Cu²⁺(aq) + NH₃(aq) ⇄ [Cu(NH₃)]²⁺(aq)

[Cu(NH₃)]²⁺ + NH₃(aq)⇄ [Cu(NH₃)₂]²⁺(aq)

[Cu(NH₃)₂]²⁺ + NH₃ (aq) ⇄ [Cu(NH₃)₃]²⁺ (aq)

[Cu(NH₃)₃]²⁺ + NH₃(aq) ⇄ [Cu(NH₃)₄]²⁺(aq)

Equilibrium reaction:

Cu²⁺(aq) + 4NH₃(aq) ⇄ [Cu(NH₃)₄]²⁺(aq)

Also, Kf is defined as:

K f = [[Cu(NH3)4]2+]/[Cu2+][NH3]4

K f = 5.03x10¹³

learn more about equllibirium reaction here : https://brainly.com/question/16391221

#SPJ4

the typical values for the enthalpy of formation: H fo[A] = 433 KJ/mol. H fo[B] equals -256 KJ/mol.

You must multiply the rate of each by the quantity to get these costs (in units or hours).For instance, if the unit size is 20 pounds and the cost of direct supplies is $10, $10 would be multiplied by 20 to equal $200. For just the direct materials, this would be the standard price.

The change in Gibbs free energy that occurs when 1 mole of a compound is created from its component parts is known as the standard Gibbs free energy of compound formation. in their standard states, which are the element's most stable configuration at 25 °C and 100 kPa. fG is its symbol.

To know more about enthalpy visit:-

https://brainly.com/question/21102695

#SPJ4

The product is [tex]ZnSO[/tex]₄[tex](aq)[/tex] [tex]+ Fe(s)[/tex]  and this is in aqueous form which is formed by the reaction  [tex]FeSO[/tex]₄ [tex](aq) + Zn(s)[/tex]   .

The reaction given in the question is,

[tex]FeSO[/tex]₄ [tex](aq) + Zn(s)[/tex]

When this net ionic reaction takes place completely it gives a product as

[tex]FeSO[/tex]₄ [tex](aq) + Zn(s)[/tex]  ⇒  [tex]ZnSO[/tex]₄[tex](aq)[/tex] [tex]+ Fe(s)[/tex]

Where,

[tex]FeSO[/tex]₄  is Ferrous sulfate that is hydrous

 [tex]Zn[/tex] is zinc that is solid

[tex]ZnSO[/tex]₄  is Zinc sulfate that is hydrous

[tex]Fe[/tex]  is Iron or Ferrous that is solid

Here,

[tex]Zn[/tex] gets oxidized and [tex]Fe[/tex] gets reduced.

The reduction and oxidation reactions are follows :

Reduction reaction is ,

[tex]Fe[/tex] ² +2e  ⟶[tex]Fe[/tex] ⁰

Oxidation reaction is ,

[tex]Zn[/tex] − 2e⁻ ⟶[tex]Zn[/tex] ²

A net ionic equation is a chemical equation of a reaction that lists only the species involved in the reaction. The net ionic equation is commonly used in acid-base neutralization reactions, double displacement reactions, and redox reactions.

Can learn more about Net Ionic equation from https://brainly.com/question/24287334

#SPJ4

The concentration of the H₂SO₄ solution used for titration is 0.168M.

The chemical equation of the reaction of the H₂SO₄ and NaOH is,

H₂SO₄ + NaOH → Na₂SO₄ + H₂O

So, we can see, from the reaction.

One mole of H₂SO₄ reacts completely with one mole of NaOH.

We know,

Moles = Molarity x volume

Molarity of H₂SO₄ x Volume of H₂SO₄ = Molarity of NaOH x volume of NaOH

Putting values,

Molarity of H₂SO₄ x 25 = 1.2 x 3.52

Molarity of H₂SO₄ = 0.168M.

So, the concentration of the H₂SO₄ solution is 0.168M.

To know more about Molarity, visit,

https://brainly.com/question/14469428

#SPJ4

3 moles of NaOH required to make 1 mole of  Na3PO4 in the given reaction.

H3PO4(aq) + 3NaOH(aq) ⇄ Na3PO4 (aq) + 3H20

Quantifying the quantity of a material is made easier with the aid of the mole concept. It is understood that even a single gram of a pure element has a sizable number of atoms when dealing with particles at the atomic (or molecular) level. In this regard, the mole notion is frequently utilized. The "mole," which is a count of a large number of particles, is the most commonly used unit of measurement.

The letter "NA" is often used to indicate the value 6.02214076*10^23, commonly known as the Avogadro constant. Atoms, molecules, monoatomic and polyatomic ions, as well as other particles, are among the elementary things that may be represented in moles (such as electrons).

To know more about  moles visit : brainly.com/question/15209553

#SPJ4

The melting of chocolate is an example of a physical change. When chocolate melts the solid state converts to the liquid state where the molecules becomes distant apart.

A physical change involves the change in state of matter or phase change. It does not involves any breaking or making of chemical bonds. The changes which involves any chemical bond breaking or making or both it is called any chemical change.

In solid state, molecules are closely packed and have no space in between to move apart. Therefore, they form definite shape and volume. When solids converts to liquid they are said to be melting and needs temperature.

In liquid state molecules have some space to move apart and thus they don't have definite shape. When chocolate melts to form molten state, they under high temperature their molecules get far apart and starts to flow.

To find more on physical changes, refer here:

https://brainly.com/question/17931044

#SPJ1

These pewter pitchers work great while heated and used  as wine decanters, iced tea snifters, and for serving iced water. Every pewter pitcher we sell is produced using same techniques.

They are food safe and free of lead, just like all of our pewter goods. Pewter is a malleable metal alloy that traditionally contains 85–99% tin with the other components being copper, antimony, bismuth, and occasionally, though less frequently now, lead. Heated is also utilized on occasion. The high copper content of this lead-free pewter alloy enables it to produce the finest detail in open face, gravity pour, sand, and cast iron moulids. Heated for good strength. Copper and antimony make up 91–93% of the tin. Around the start of the Bronze Age, the Near East saw the first usage of pewter.

Learn more about Pewter here

https://brainly.com/question/29550356

#SPJ4

the square root of nth root symbol, which is used in mathematics. Square-root-containing expressions are known as radical expressions. Radicand: A number or statement contained within the radical symbol.

Square root and nth roots are represented by the symbol "radical," which. a square root is a component of a radical expression, which is an expression. Radicand: The value or expression contained on the inside of the radical symbol. An equation that uses radical expressions as radicands and contains variables is referred to as a radical equation.

Among some examples of radicals expressions are 2, 3 72, 2 x + 7, and 4 1 p. We will examine radical expressions in-depth today, including how to create and analyze them as well as how to use their characteristics to our advantage.

To know more about  radical expression visit:

https://brainly.com/question/3796764

#SPJ4

The molecule that does not have a dipole moment and in which the central atom is sp3 hybridized will have an electron-domain are CH4 , SF4.

Now coming to the hybridization of methane, the vital atom carbon is sp3 hybridized. This is due to the fact one 2s orbital and 3 2p orbitals withinside the valence shell of carbon integrate to shape 4 sp3 hybrid orbitals which can be of same electricity and form

CH 4​ and H 2​ O each has sp 3  hybridisation however as there's no lone pair found in CH 4​  while in H 2​ O there are lone pairs found in water molecule. Therefore form of methane is tetrahedral while water molecule has bent form.

Read more about sp3 hybridized :

https://brainly.com/question/12581806

#SPJ4

The potential of the cell when it is prepared using 0.5 m zn(no3)2 solution, hydrogen gas at 1.2 bar and a ph of 5.5 is 0.4416V

Ecell=E°cell-0.0591/nlog([Zn]*Ph2/[H⁺]²)

=0.76-0.0591/2log(0.5*1.184/3.162*10⁻⁶)²)

=0.4416V

ΔG=-nFE°

n=2,E°=0.76V

=-2*96485*.76

=-146.657 kj

The lightest substance is hydrogen. Hydrogen is a gas of diatomic molecules with the formula H 2 when conditions are normal. It burns easily and is non-toxic, tasteless, colorless, odorless, and odorless. With approximately 75% of all normal matter made up of hydrogen, it is the most prevalent chemical in the universe. Having the atomic number 1 and the letter H, hydrogen is the first chemical element. The lightest substance is hydrogen. Hydrogen has the formula H2 and exists as a gas under normal conditions. It burns easily and is non-toxic, tasteless, colorless, odorless, and odorless.

Learn more about hydrogen gas here:

https://brainly.com/question/12745309

#SPJ4

Typical Free Radicals Radicals such as superoxide anion, hydrogen peroxide, hypochlorite, nitric oxide, and peroxyntrite

Most usually, bleach, also known as sodium hypochlorite, is used as a disinfectant. It works well to kill viruses, germs, fungi, and mycobacterium. It is a broad-spectrum disinfectant.

Similar to chlorine, sodium hypochlorite creates hypochlorous acid when it is discharged into water. The pathogens in the water, such as bacteria, viruses, and protozoa, then react with this acid and become inactive, making them unable to multiply or constitute a threat to human health.

To know more about hypochlorite visit:

https://brainly.com/question/10423391

#SPJ4

The wavelength of yellow light is 580nm which is 580×10⁻⁹ m, so its frequency will be 5.17×10¹⁴ m/s.

The frequency and the wavelength are indirectly proportional to the each other. More is the wavelength, lesser is  frequency and vice-versa. The speed at which a wave travels is equal to  product of the frequency and wavelength, which justifies  link between these two parameters.

V = λ f

where,

V is  wave speed,

f is wave frequency,

λ is  wavelength.

Given that,

Wavelength = 58.9nm

Speed of light= 3×10⁸ m/s

The frequency of yellow light will be

ν= c/λ

​ =   3.0×10⁸ m/s/ ​580×10⁻⁹ m

=5.17×10¹⁴ m/s.

The wave number of yellow light,

νˉ = 1/λ

= 1/580×10⁻⁹ m

=1.72×10⁶/m.

So, the frequency of the sodium lamp will be 5.17×10¹⁴ m/s.

To learn more about frequency, please refer:

https://brainly.com/question/254161

#SPJ4

Noble gases are a subset of nonmetals in group 18 that are frequently referred to as chemically inert because of their lack of color, odor, and high degree of reactivity. Helium, neon, argon, krypton, xenon, radon, and the man-made element oganesson are all members of this category.

The noble gases are a group of chemical elements that share several characteristics. They are all monatomic, odorless, and colorless gases with relatively little chemical reactivity under normal conditions. Helium, neon, argon, krypton, xenon, and radioactive radon are the six types of noble gases that are found in nature.

In order of mass, the noble gases are helium, argon, krypton, xenon, and radon. They are known as noble gases because of how beautiful they are and how little they generally react with anything. For this reason, they are often referred to as inert gases.

Thus, noble gases have a stable configuration . Group 18 elements don't form many compounds, since they are gaseous and chemically inert.

To learn more about noble gases, follow the link;

https://brainly.com/question/11764545

#SPJ1

The hexane(C₆H₁₄) is an alkane which has general molecular formula C_nH_2n+2 and it is soluble in benzene and decane(C₁₀H₂₂).

Non-polar compounds are the compounds which do not show the polarity and they cannot form any ions in a solution. In a given options, formula of benzene is C₆H₁₂, oil contains hydroxyl groups in it which are polar. Methanol is also polar in nature due to the hydrogen bond. KCl is a polar compound which forms K⁺ and Cl⁻ ions. According to the principle of like dissolves like, if any substance is polar it should be soluble in polar substance. If any substance is non-polar, then it should be soluble in non-polar. Hence, the compound hexane(C₆H₁₄) is soluble in only benzene and decane(C₁₀H₂₂).

Therefore, hexane(C₆H₁₄) is soluble in benzene and decane(C₁₀H₂₂). Hence, option c and e is correct.

To know more about solubility of a compound

https://brainly.com/question/15215632

#SPJ4

The hot water from the tap can be used in labs for various purposes.

The hot water from the tap can be used for dilution purposes. It can be used in reactions that require water as a reactant.

The hot water that is present in taps can be used to make dilute solutions. As without water, some reactions won't proceed, water can be used as the reactant.

Also, hot water is excellent for acting as a mixture as their water that is warm can serve as an excellent source for mixing compounds.

Hot water can also be used in a lab for washing of equipments.

To learn more about water, click here:

https://brainly.com/question/1313076

#SPJ4

The carbonyl absorption band in your product spectrum is 1656 [tex]cm^{-1}[/tex].

A was the or enolate ion reacts with such a carbonyl chemical to create a -hydroxyaldehyde and -hydroxyketone, which itself is subsequently dehydrated to create a conjugated enone. This is an example of an endothermic reaction in organic chemistry.

The redirected aldol reaction is a kind of regular crossing aldol reaction. Using LDA, the enolate is made from one carbonyl molecule. The other carbonyl molecule is accordingly the electrophile. Even though there are alpha hydrogens for both locations, just one of the elements is an enolate because it is made with LDA.

To know more about Aldol Reaction visit:

https://brainly.com/question/23970995

#SPJ4

The dangers of pewter is when it can contains lead and and tin , then it is poisonous substance.

The old pewter contains a large amount of lead and tin and the tin is very harmful substance or it is poisonous substance. if we use the lead contain pewter on daily basis the the resulted in the chemical leaching out of the utensil will be absorbed by the human body which is very dangerous and may lead to the persons death.  but now the pewters containing the lead is now no longer in use such as the jewelry's , cups, plates. so, now the pewter with no lead is not harmful for the human beings.

Thus the pewter containing lead is poisonous to the human life.

To learn more about pewter here

https://brainly.com/question/29550352

#SPJ4

Four properties of mixture are- it's constitution is present in any ratio, energy is neither produced or evolved, no fixed melting or boiling point, components can be seperated.

A mixture is composed of two or more simpler substances. These can be compounds or chemical elements. There are 2 types of mixtures- homogeneous and heterogeneous. Four properties of a mixture-

1. The constituents of mixture can be present in any ratio and has no fixed composition.

2. Energy is neither produced nor evolved to form mixture.

3. The mixture has no fixed boiling points and melting points.

4. Components of mixtures can be separated by physical methods simply.

To learn more about mixture visit the link- https://brainly.com/question/2331419

#SPJ4

A solution containing a mixture of metal ions can be separated by precipitation using anions like Cl, Br, SO₂,, CO₂,, S₂, Cr₂O₂, PO₂,, and OH, among others.

Precipitation can be used to distinguish certain metal ions from other metal ions when they combine to create insoluble salts with a certain anion. By precipitating the anions with the right metal ions, we may also separate the anions. Although the concentrations of their saturated solutions are tiny, medium, and high, there are no clear boundaries between insoluble salts, sparingly soluble salts, and soluble salts.

For insoluble and sparingly soluble salts, solubility products are typically included; however, they are not provided for soluble salts. For soluble salts, the solubility products are enormous.

To know more about separation of mixture, please refer:

https://brainly.com/question/14309645

#SPJ4

The molecular formula of the compound is [tex]C_{7} H_{10} O_{2} N[/tex]

We know that the molecular formula is the kind of formula that shows all the atoms that are present in the compound. Thus, we are looking at the kind of formula that gives the numbers of each atom in the compound.

There are three kinds of chemical formula;

Structural formula

Empirical formula

Molecular formula.

The image shows the arrangement of the atoms and we can use that to deduce the structural formula from the color codes shown.

Learn more about molecular formula:https://brainly.com/question/28647690

#SPJ1

The Miller-Urey experiment provides evidence that the nucleotide base adenine can be created by combining hydrogen cyanide and ammonia in water.

To learn more about the Hypothesis refer to;

https://brainly.com/question/27179806

#SPJ4

5.83 x 10^20 Cu atoms

Natural-Items from nature such as bones, seeds, fruit pits, and other objects must be eliminated during preparation because they may cause major harm and food hazard must be removed during preparation.

Food contamination caused by food dangers like chemical, biological, and physical ones might hurt your customers. Customer safety can be improved by knowing how to prepare, store, and serve food correctly. It is best to avoid the food hazards that could cause food to become contaminated because no amount of cooking or manipulating food can ensure its safety after it has been contaminated. The physical risks that are present in food on a natural basis will be covered in this article, along with tips on how to keep them from tainting the food you prepare and serve. Natural-During preparation, it is necessary to remove any items that came from the natural world, such as bones, seeds, fruit pits, and other objects that could be very harmful.

Learn more about food hazard here:

https://brainly.com/question/20533361

#SPJ4

Nitric acid would be the end product of this reaction, which uses nitrogen dioxide, oxygen, and water as reactants.

For this reaction, the reactants are nitrogen dioxide, oxygen and water while the product would be nitric acid. The chemical equation would be written as:

NO2(g) + O2(g) + H2O(l) --> HNO3(aq)

This can be a complete equation when the elements are balanced in each side.

4NO2(g) + O2(g) + 2H2O(l) --> 4HNO3(aq)

Therefore, when Nitric acid is a component of acid rain that forms when gaseous Nitrogen dioxide pollutants react with gaseous Oxygen and liquid water to form aqueous Nitric acid as 4 N O 2 ( g ) Nitrogen dioxide + O 2 ( g ) Oxygen + 2 H 2 O ( l ) Water → 4 HN O 3 ( aq ) Nitric acid .

To learn more about  acid rain equation refer

https://brainly.com/question/1593538

#SPJ4

In addition to H²O equilibrium, the reaction will move forward direction.

Le Chatelier's precept, additionally known as Chatelier's principle, is a precept of chemistry used to predict the impact of exchange in conditions on chemical equilibrium

Le Châtelier's principle states that if a dynamic equilibrium is disturbed by changing the situations, the position of equilibrium shifts to counteract the alternate to reestablish equilibrium. Le Chatelier's precept may be stated as follows: A exchange in one of the variables that describe a machine at equilibrium produces a shift inside the function of the equilibrium that counteracts the effect of this change.

Learn more about Le Chatelier's principle here:-https://brainly.com/question/2943338

#SPJ1

If the student was synthesizing aspirin in the lab and she calculated the mass of aspirin that should form as 11.74 g and when she weighed her aspirin product on the balance which was 2.63 g. The percent yield can be 22.4 %.

The amount of a product received from a reaction is indicated by the percent yield.

The theoretical yield is given, which is 11.74 g and the actual yield is given which is 2.63 g.

Now, we use the formula of the percentage (%) yield,

percentage (%) yield = [tex](\frac{ Actual yield }{ Theoretical yield } )[/tex] × 100  

% yield = [tex](\frac{2.63}{11.74})[/tex] × 100

% yield = 22.4 %

So, the percentage (%) yield is 22.4 %.

To learn more about Percent yield here :

https://brainly.com/question/13711435?referrer=searchResults

#SPJ4

The millimoles of barium chloride the chemist has added to the flask will be 2.6 x 10² mmol.

Volume of barium chloride (BaCl₂) = 425.0 ml

Molarity of BaCl₂ = 0.62 M

Number of mmol = ?

Calculate the number of mmol by using the following formula:

   Molarity = moles (solute) / Volume (solution) in liter

As we have to find the number of mmol so rearrange the equation for mmol.

    millimoles (solute) = Molarity x Volume (solution) in mL

    millimoles of BaCl₂ = Molarity of BaCl₂ x Volume (solution) in mL

Put the values in the above equation.

    mmol of BaCl₂ = 0.62 M x 425.0 mL

    mmol of BaCl₂ = 0.62 mol/L x 425.0 mL

    mmol of BaCl₂ = 263.5 mmol

    mmol of BaCl₂ = 2.6 x 10² mmol

The complete question is attached.

You can also learn about molarity from the following question:

https://brainly.com/question/2817451

#SPJ4