The pass keyword is ignored by the Python interpreter and can be used as a placeholder for code that will be written later.
What does Java's pass keyword mean?A copy of each argument is produced in Java upon method invocation and then sent to the method. Primitive data types are handled by copying the value onto stack memory before passing it to the procedure.
Therefore, The pass keyword in Python is a complete statement by itself. This statement is ignored during the byte-compile step and has no effect. The Python pass statement, however, is unexpectedly helpful for a statement that has no effect. The final code that is used in production can occasionally benefit from pass.
Learn more about Python interpreter from
https://brainly.com/question/28691290
#SPJ1
A data analyst uses the sum function to add together numbers from a spreadsheet. However, after getting a zero result, they realize the numbers are actually text. What function can they use to convert the text to a numeric value?.
Since the data analyst uses the sum function to add together numbers from a spreadsheet. The function that can be use to convert the text to a numeric value is VALUE.
What in Excel is the value function?A text string that represents a number is changed into a number. Excel's VALUE function calculates the value of text that represents a number. $5, for instance, is a textual representation of a number. The result of applying the VALUE formula to this data is 5, so. So, it is clear how this function allows us to obtain the numerical value that is represented in Excel by text.
Hence, A controlled dynamical system's value function, when started at the time-t state variable x(t)=x, represents the system's optimal payoff over the interval [t, t1].
Learn more about data analyst from
https://brainly.com/question/29352258
#SPJ1
a large company is moving to a new facility and selling its current office fully-furnished with the company's older pc workstations. not only must the move be as quick as possible, but the company will also provide employees with new equipment. the it department has backed up all the important data, and the company purchasing the office and equipment is a market competitor. therefore, the company has instructed the it department to perform full data sanitation and implement the recycling policy. recommend types of data sanitation procedures the it department should use before leaving the facility for good. (select all that apply.)
Types of data sanitation procedures the IT department should use before leaving the facility for good is recommended here:
Crypto erase hard drivesPulverize USB drivesDegauss magnetic tape drivesWhat is data sanitation?In order to ensure that data from a storage device cannot be recovered, data sanitization involves purposefully deleting, erasing, or destroying it.
Usually, when data is deleted from storage media, the media is not truly erased and can be recovered by an attacker if they gain access to the device. For security and data privacy, this raises serious issues. Sanitization is the process of cleaning up storage media so that no data remains on the device and cannot be recovered, not even with the most sophisticated forensic tools.
IT equipment must be sanitized before being disposed of or reused when it has reached the end of its useful life. This is to ensure that any sensitive data stored on the equipment has actually been erased.
Learn more about data sanitation
https://brainly.com/question/28043694
#SPJ4
Write a loop that inputs words until the user enters done. After each input, the program should number each entry and print in this format: #1: you entered _____ when done is entered, the total number of words entered should be printed in this format: a total of __ words were entered. Sample run please enter the next word: cat #1: you entered the word cat please enter the next word: iguana #2: you entered the word iguana please enter the next word: zebra #3: you entered the word zebra please enter the next word: dolphin #4: you entered the word dolphin please enter the next word: done a total of 4 words were entered.
The software serves as a loop illustration. Loops are employed to carry out repetitive tasks. The Python program that uses comments to clarify each line is as follows:
What is illustration?A decoration, interpretation, or visual explanation of a text, concept, or process is called an illustration. Illustrations are made to be integrated into print and digitally published media, including posters, flyers, magazines, books, instructional aids, animations, video games, and films
This is where the initial word is inputted.
phrase = input
"Please input the following word:"
This starts the count at 0.
count = 0
#Until the user types "STOP," the following iteration is repeated.
as long as word!= "STOP":
#This displays the entered word.
print("You entered",word) ("You entered",word)
The increments here count by one.
count += 1
The following words are input from this.
phrase = input
"Please input the following word:"
Therefore, The software serves as a loop illustration
Learn more about illustration here:
https://brainly.com/question/1462956
#SPJ1
in interface design, a(n) check ensure that combinations of data are valid, for example, to confirm that the zip code of an address corresponds to the correct state name.
In interface design, consistency check ensures that combinations of data are valid, for example, to confirm that the zip code of an address corresponds to the correct state name.
What is a consistency check?
A test called a consistency check is carried out to see if the data contains any internal conflicts. A consistency check determines whether the value of two or more data elements does not conflict, to put it simply. Specifically, whether or not the rules written for data contain statements that conflict.
You can conduct a consistency check on a single rule or a group of rules. For instance, a consistency check is frequently performed to make sure the shipment date of a package is not earlier than the order date.
To learn more about a consistency check, use the link given
https://brainly.com/question/21982176
#SPJ4
In addition to information about disciplinary and enforcement action taken against a mortgage loan originator, the NMLS may also make available for public access: A mortgage loan originator's home address.
False.
A mortgage loan originator's home address, the number of loans originated by a loan originator and former clients of the mortgage loan originator are not for public access.
Information by NMLS for public access:
Information or material held by the NMLS (Nationwide Multistate Licensing System and Registry) relating to the employment history and/or disciplinary and enforcement actions taken against a mortgage loan originator is not protected by confidentiality laws. Information/material of the mortgage loan originator's employment history is available for public access.
A state licensing agency granting someone a license to act as a mortgage loan originator. Subsequent to the granting of the license, the agency received a supplemental criminal history report which indicated that he/she had been convicted of a money laundering charge in another state. Then the state licensing agency may enter a temporary order requiring a person to cease doing business under a license if it determines that the license was erroneously issued.
To know more about Mortgage loan originators, click on:
https://brainly.com/question/28079837
#SPJ4
does this record contain a certificate? what is the certificate length? what is the frame length? does the certificate fit into a single ethernet frame? include screenshots to show them.
There is no certificate, it is in another record. It does fit into a single Ethernet frame.
What is a Ethernet frame?
The Ethernet frame is primarily responsible for the correct rulemaking and successful transmission of data packets when transmitting data over Ethernet. The frame essentially transports data sent over Ethernet. Depending on the size of the data to be transported, an Ethernet frame can range from 64 bytes to 1,518 bytes.
Devices in an Ethernet network share data via packets. They include the Ethernet frame, which is divided into several data sets, among other things. These records are made up of binary code that contains vital information like addresses, control information, payload data, and checksums.
Ethernet frames are structured differently depending on the Ethernet standard and may contain more or fewer data fields depending on the network protocol.
To know more about Ethernet frame, visit: https://brainly.com/question/16825911
#SPJ4
according to the theoretical view, the visual system perceives meaningful information directly, without any intermediate steps to interpret it
Theoretically, the ecological visual system receives relevant information without the need for any intermediate steps of interpretation.
What does interpreting mean?
According to Webster's dictionary, the fundamental definition of interpretation is the "activity of explaining the meaning about something; the manner something is described or understood." The notion of interpretation in terms of language should be expanded to include converting a spoken or signed communication into another or spoken signed language while maintaining the register and sense of the material in the source language. It is the exchange of spoken or sign language between speakers of several languages. Not only must a language interpreter and sign language interpreter rapidly and accurately translate meaning.
To know more about Interpreting
https://brainly.com/question/4785718
#SPJ4
If you need to take a printout of a report, how can you specify the paper size you re using?.
When printing a report, you can specify the paper size you are using by selecting the correct paper size from your printer's settings. Depending on your printer, you may also be able to specify the paper size directly from the print dialogue box. If not, you can usually select the paper size from your printer's settings.
The Benefits of Specifying the Correct Paper Size When PrintingWhen printing a report, selecting the correct paper size is essential to ensure that your document looks professional and aesthetically pleasing. Not only does selecting the right paper size make sure that your document looks good, but it also helps to maximize the amount of information that can be printed on each page. This allows you to save money by not wasting paper and ink, while still being able to include all the necessary information in your document.
Learn more about the paper size:
https://brainly.com/question/4768616
#SPJ4
d) is the following a walk in the graph? is it a trail? is it a path? is it a circuit? is it a cycle? please answer all the questions for each of the following.i) ii) iii)
The following a walk in the graph is a cycle.A closed path is a cycle.
These cannot have any repetitions.
A cycle can only be created by traversing a graph in such a way that neither a vertex nor an edge are repeated, but rather the starting and ending vertex must match. Only multi-graphs require the listing of edges. A trail is a path without a constant edge. A walk with only one unique vertex is called a path. With the first vertex being u and the last vertex being v, a u, v-walk, u, v-trail, u, v-path is a walk, trail, and path, respectively. If u = v, both the u, v-walk and the u, v-trail are closed. A path is described in graph theory as an open walk in the graph which neither vertices may repeat. There is no repeating of edges.
Learn more about walk in the graph here:
https://brainly.com/question/9372637
#SPJ4
what is the maximum possible height of a tree of n nodes? what is the minimum possible height of a tree of n nodes?
A tree with n nodes has a log2 maximum height (n). The ceiling of log2(n), which is the lowest amount larger than or equal to log2, is the smallest height that a tree.
What are Binary Trees?
A binary tree, also known as the left child and the right child, is a type of tree data structure used in computer science where each node can have up to two children. A (non-empty) tree is defined recursively as a tuple (L, S, R) only using set theory concepts, where L and R are binary trees or the empty set and S is a singleton coordinating the root. L and R are also known as the empty set or the empty set of binary trees. According to some writers, the b - tree can be an empty set.
To know more about Binary trees
https://brainly.com/question/13152677
#SPJ4
Write a pueode algorithm and print, the value of the firt number entered if it i greater than econd
Pseudocode Writing Techniques.Don't forget to capitalize the first word (often one of the main six constructs).Each line should contain only one statement.
Write a pueode algorithm ?For better readability, hierarchy, and nested constructs, indent.A procedure for solving a problem in terms of the actions that must be taken and the order in which those actions must be taken is called an algorithm. Multi-line sections should always be terminated using one of the END keywords (ENDIF, ENDWHILE, etc.).Pseudocode isn't actually a programming language; it's just a series of steps used to solve a problem.Before writing the code in a particular language, it writes programs using short phrases.#include <iostream>
using namespace std;
int main()
{
int first, second, count;
while(true)
&nb...
To learn more about pueode algorithm refer
https://brainly.com/question/24953880
#SPJ4
lab 4-2: after authorizing a new dhcp server, what must you do to ensure that the dhcp server can release ip addresses to the clients on the network?
Create a scope after granting a new DHCP server authorization to make sure it can provide IP addresses to network clients.
What is a server?
A server is a piece of hardware or software that processes requests sent over a network and answers to them. A client is the device that submits a request and waits for a reply from the server. The computer network that accepts requests for online files and transmits those files to a client is referred to as a "server" in the context of the Internet. Network resources are managed by servers. A user might install a server, for instance, to handle print jobs, transmit and receive email, or create a website.
To know more about server
https://brainly.com/question/25435769
#SPJ4
create a public class named mergesort that provides a single instance method (this is required for testing) named mergesort. mergesort accepts an array of ints and returns a sorted (ascending) array. you should not modify the passed array. if the array that is passed is null you should throw an illegalargumentexception. mergesort should extend merge, and its parent provides several helpful methods: int[] merge(int[] first, int[] second): this merges two sorted arrays into a second sorted array. if either array is null it throws an illegalargumentexception, so don't call it on null arrays. int[] copyofrange(int[] original, int from, int to): this acts as a wrapper on java.util.arrays.copyofrange, accepting the same arguments and using them in the same way. (you can't use java.util.arrays in this problem for reasons that will become obvious if you inspect the rest of the documentation...) note that you do need to use merge and call it the correct number of times. this will be tested during grading. you should use an array of size 1 or 0 as your base case.
A new public class named MergeSort is a class that contains a method to sort an array of integers using the Merge Sort algorithm.
How to create a public class called MergeSort that provides a single instance methodCreate a new public class named MergeSort.Declare a variable of type int[] array to store the list of integers that will be sorted.Create a method named MergeSort that takes in a single parameter of type int[].Create two temporary sub-arrays to divide the array into halves.Sort each sub-array recursively by calling the MergeSort method on each sub-array.Merge the two sorted sub-arrays back together by comparing the elements in each sub-array.Return the sorted array.Create a main method to test the MergeSort method.Instantiate an array of integers.Call the MergeSort method on the array.Print the sorted array.The Merge Sort algorithm is a sorting algorithm that divides a given array into two halves, recursively sorts each half, and then merges the two sorted halves together into a single, sorted array.
Learn more about Algorithm: https://brainly.com/question/24953880
#SPJ4
What is the name of the 7-bit code used to represent up to 128 different characters, including upper and lower case and special characters, used to represent text in computers?.
The ASCII (American Standard Code for Information Interchange) is the name of the 7-bit code used to represent up to 128 different characters, including upper and lower case and special characters, used to represent text in computers.
What is ASCII?ASCII (American Standard Code for Information Interchange) is the most common character encoding format for text data on computers and the Internet. Standard ASCII-encoded data has unique values for 128 alphanumeric, numeric or special symbols and control codes.
ASCII encoding is based on the character encoding of telegraphic data. It was first published by the American National Standards Institute as a computer science standard in 1963. The characters of ASCII encoding include upper and lower case letters A-Z, digits 0-9 and basic punctuation marks. It also uses some non-printing controls that were originally intended for use with teletype printing terminals.
To learn more about ASCII, refer;
https://brainly.com/question/17147612
#SPJ4
the form that was created to prevent fraud, where a hacker provides a new routing number for the transfer of funds and then highjacks those funds, is called the:
The form that was created to prevent fraud, where a hacker provides a new routing number for the transfer of funds and then highjacks those funds, is called the: Wire Fraud and Electronic Funds Transfer Advisory (WFA).
What is a skimming fraud?A skimming fraud can be defined as a type of fraud that involves a criminal (hacker) illegally capturing the credit card information of a cardholder without the holder's knowledge, so as to perform unauthorized transactions with it in the future.
Under the fraud triangle, there are three (3) main elements that helps any accounting fraud to occur and these include the following:
IncentiveOpportunityRationalizationIn Cyber security, Wire Fraud and Electronic Funds Transfer Advisory (WFA) is a form (document) that was designed and developed to prevent wire fraud in an escrow, thereby, protecting consumer's funds from a hacker.
Read more on fraud here: brainly.com/question/28541466
#SPJ1
write a few lines of code or pseudocode that takes a string of zeros and ones and produces the run-length encoding. do not use a prewritten function - please write your own program g
The approach that takes a string of zeros and one and produces run-length encoding is given below:
Choose the very first letter of the source string. Then,add the chosen character to the string's final destination. Now, add the count to the destination string after counting the character's subsequent occurrences. If the string's end isn't reached, choose the next character and repeat steps 2, 3, and 4.
def encode(message):
encoded_message = ""
i = 0
while (i <= len(message)-1):
count = 1
ch = message[i]
j = i
while (j < len(message)-1):
if (message[j] == message[j+1]):
count = count+1
j = j+1
else:
break
encoded_message=encoded_message+str(count)+ch
i = j+1
return encoded_message
#input the value
encoded_message=encode("11003300")
print(encoded_message)
Output:
21202320
In other words, a single data value describing the repeated block and how many times it appears in the image is kept for sequences that display redundant material using the lossless compression technique known as run-length encoding (RLE). This data can be used to precisely rebuild the image later on during decompression.
To learn more about run-length encoding click here:
brainly.com/question/21876555
#SPJ4
Based on the NASA statistics on budget and schedule overrun vs. time spent on requirements process, what is the recommended amount of time to spend on the requirements stage?
A. 0% of the total time spent on the project
B. 5-10% of the total time spent on the project
C. 20% of the total time spent on the project
D. The same amount as you expect to spend on testing.
b
For programs and projects in human spaceflight, space science, aeronautics, technological development, and education, the budget sets funding amounts. The Apollo program peaked NASA's funding in the 1960s. Thus, option B is correct.
What NASA statistics on budget schedule overrun vs. time?Suggests that more than half of all large IT projects—those with initial costs greater than $15 million—significantly exceed their budgets.
Large IT projects often generate 56 percent less value than expected and go 45 percent over budget and 7 percent beyond schedule.
A 12% increase above FY 2020, NASA's $25.2 billion budget for fiscal year 2021 was set. 1 The impact of every dollar spent by NASA on the American economy is greater. It encourages technological developments that improve our daily life.
Therefore, 5-10% of the total time spent on the project.
Learn more about NASA here:
https://brainly.com/question/20763143
#SPJ1
Add GPA must be between 2.5 and 4. as an error alert to the validation rules for the selected cells. Do not include a title.
Select the Form Text button under the Get External Data category on the Data tab after activating the worksheet you wish to import data into. 2. From the Import Text File window, select the text file you want to import, and then click Import.
What GPA alert to the validation rules for the selected cells?As an error warning, add GPA must be between 2.5 and 4 to the validation rules for the chosen cells. Leave out the title. You pressed the Data Validation button arrow in the Data Tools Ribbon Group's Data Ribbon Tab.
Therefore, When you are ready to select all the data for the chart, including the new data series, click and drag it into the worksheet while keeping the dialog box open.
Learn more about GPA here:
https://brainly.com/question/15170636
#SPJ1
if data for a time series analysis are collected on an annual basis only, which of the following components may be ignored? trend seasonal cyclical irregular
Seasonal
Seasonality refers to periodic fluctuations. For example, electricity consumption is high during the day and low during night, or online sales increase during Christmas before slowing down again.
What is seasonality indicator?
Seasonality, refers to the seasonal characteristics of the time series data. It is the predictable pattern that repeats at a certain frequency within one year, such as weekly, monthly, quarterly, etc. The most straightforward example to demonstrate seasonality is to look at the temperature data. We always expect the temperature to be higher in the summer while lower in the winter in most places on Earth. The goal of time series analysis is to take advantage of the data's temporal nature to make more sophisticated models. To properly forecast events, we need to implement techniques to find and model the long-term trends, seasonality, and residual noise in our data. This article will focus on discussing how to detect seasonality in the data and how to incorporate seasonality in forecasting.
To know more about time series analysis, click on:
https://brainly.com/question/29370296
#SPJ4
What is the use of right click of mouse?.
the duties of a database administrator include determining which people have access to what kinds of data in the database; these are referred to as___rights.
processing
The duties of a database administrator include determining which people have access to what kinds of data in the database; these are referred to as processing rights. (True)
What is database?A database is a structured collection of data that is electronically accessible and stored in computing. Large databases are hosted on computer clusters or cloud storage while small databases can be stored on a file system.
Data modeling, effective data representation and storage, query languages, security and privacy of sensitive data, and distributed computing issues, such as supporting concurrent access and fault tolerance, are all included in the design of databases.
In order to collect and analyze the data, a database management system (DBMS) communicates with applications, end users, and the database itself. The essential tools offered to manage the database are also included in the DBMS software.
Learn more about database
https://brainly.com/question/518894
#SPJ4
________ is the smallest short-range wireless network that is designed to be embedded in mobile devices such as cell phones and credit cards as a payment system, such as mobile wallets.
Near-field communications (NFC) is the smallest short-range wireless network, such as mobile wallets, is meant to be incorporated in mobile devices such as cell phones and credit cards as a payment system.
What is the Near-field communications (NFC)?Near-field communication is defined as a collection of communication protocols that allows two electronic devices to communicate across a distance of 4 cm or less.
NFC provides a low-speed connection via a simple setup that may be utilized to launch more sophisticated wireless connections. It is the smallest short-range wireless network.
Therefore, it is Near-field communications (NFC).
Learn more about the communications, refer to:
https://brainly.com/question/22558440
#SPJ1
Which commands can you use to test network connectivity between your workstation and the server? On an IP based network, you can use the ping command to check connectivity between a source and destination computer.. You can also use tracert on a Windows system to check the routing path between two hosts.
The ping command can be used to verify the connection in between the source and target equipment on IP-based networking.
What is a server?
A program or apparatus that offers a remote server and its operator, also defined as the client, is referred to as a server. The actual machine that a serving application runs within a server farm is also usually referred to as a server.
On a Windows machine, we can also use a tracer to examine the transit route between two hosts. A ping is a software or program used in network management that checks connection on an IP network. Additionally, it calculates the wait or latency across different pcs.
Learn more about server, here:
https://brainly.com/question/7007432
#SPJ1
you're browsing the web, and type in www. in the address line. instead of the website, an error screen appears. you type in 216.58.214.4, and the website comes up. what's the most likely reason for this?
The reason this is happening is that there is a problem in your network's DNS configuration.
Domain Name SystemDNS (Domain Name System) is a system in charge of storing all domain data information on the network. With DNS, existing domains or hostnames will be translated and translated into IP addresses so that they can be accessed.
DNS was discovered in 1983 by Paul Mackapetris. Before using DNS, domain mapping first uses the hosts.txt file.
Learn more about DNS at brainly: https://brainly.com/question/6580557
#SPJ4
which one of the following correctly represents a buffer soltion? h2o, o- h2co3, co32- hcl, cl2 h2co3, hco3-
H₂CO₃ and HCO₃ are the material pair that best exemplifies a buffer solution among the others since they are a solution of a weak acid and its salt.
A buffer solution is what?When a small amount of a strong acid or base is given to a solution, the pH does not change, making the fluid a buffer solution.
Typically, weak acid and salt solutions or weak base and salt solutions are used to create buffer solutions.
As they assist in maintaining the pH of biological structures investigated in vitro, buffer solutions are crucial in biological research.
learn more about buffer solutions at brainly.com/question/27371101 to
#SPJ4
Complete the function FindLastIndex() that takes one string parameter and one character parameter. The function returns the index of the last character in the string that is not equal to the character parameter. If no such character is found, the function returns -1.
Ex: If the input is tbbdn b, then the output is:
4
#include
using namespace std;
int FindLastIndex(string inputString, char x) {
/* Your code goes here */
}
int main() {
string inString;
char x;
int result;
cin >> inString;
cin >> x;
result = FindLastIndex(inString, x);
cout << result << endl;
return 0;
}
Using the codes in computational language in C++ it is possible to write a code that complete the function FindLastIndex() that takes one string parameter and one character parameter.
Writting the code:#include <iostream>
using namespace std;
int FindLastIndex(string inputString, char x)
{
// running a for loop that iterates the inputString from the last index and comes down to the 0th index. We are iterating from the last index because we want to find the last character such that it is not equal to x. So iterating the string from last makes more sense because we will find the value faster as compared to searching from the front to get that last value.
for (int i = inputString.length() - 1; i >= 0; i--) {
// if current character not equals the character x then return the index
if (inputString[i] != x) {
return i;
}
}
// if the above loop didn't return an index, then all the characters are same in the string, hence return -1
return -1;
}
int main()
{
string inString;
char x;
int result;
cin >> inString;
cin >> x;
result = FindLastIndex(inString, x);
cout << result << endl;
return 0;
See more about C++ at brainly.com/question/29225072
#SPJ1
given a merge-sorting algorithm being implemented and runs on a six-processor parallel computer system, describe the corresponding analytical time complexity
On a parallel computer system with six processors, a merge-sorting method has an analytical time complexity of O(n log n).
Describe merge sort.
A sorting algorithm called merge sort employs the divide and conquer method. A list of items is broken down into smaller sublists, and then those sublists are sorted and merged back together to create a single sorted list. A recursive algorithm is used by the "Merge Sort" to produce its results. The divide-and-conquer algorithm divides a large problem into more manageable, smaller chunks that yet resemble the original problem. The main problem is subsequently resolved by recursively resolving these subproblems and combining their solutions.
To know more about Merge sort
https://brainly.com/question/13152286
#SPJ4
your organization has recently revised the security policies and need all the network devices to store their logs in a centralized location. you should be able to review informational or error messages from the central location. to be able to meet this goal, which of the following should you implement?
Able to to meet the goal the following should you implement is Syslog server
What is meant by Syslog server ?Network devices can connect with a logging server using a common message format by using the System Logging Protocol (Syslog). It was created primarily to make monitoring network devices simple. A Syslog agent can be used by devices to transmit notification messages in a variety of distinct circumstances.
Computer systems deliver event data logs to a central place for storage via the Syslog protocol.
Syslog-core ng's is built in C, which makes it extremely quick. Although the majority of modules are likewise written in C, the syslog-ngTM incubator offers modules that enable syslog-ngTM to be extended with destinations written in Java, Lua, Perl, or Python.
To learn more about System Logging Protocol refer to:
https://brainly.com/question/28446565
#SPJ4
Define a constructor as indicated. Sample output for below program:
Year: 0, VIN: -1Year: 2009, VIN: 444555666
Using C++ language
In C++, a constructor is a special 'MEMBER FUNCTION' with the same name as its class that is used to initialize some valid values to an object's data members. It is run automatically whenever a class object is created.
What is Constructor?
In C++, a constructor is a special method that is called automatically when an object is created. In general, it is used to initialize the data members of new objects. In C++, the constructor has the same name as the class or structure. Constructor is always called when an object is created. It constructs the values, i.e. provides data for the object, hence the name constructors.
Because constructors do not have a return value, they do not have a return type.
To know more about Constructor, visit: https://brainly.com/question/27727622
#SPJ4
in this lab, when you first tried to reach the ftp server from another computer on the network, the connection failed. why did it fail?
The connection failed because The software firewall on the FTP server host did not allow connectivity.
The solution is to configure the software firewall to allow connections from the FTP client.The Impact of Firewalls on FTP ConnectivityFirewalls play an essential role in the security of networks, computers and other systems. They act as a barrier between the internal network and the external network, preventing unauthorized access to systems and data. However, firewalls can also limit access to systems and data by blocking legitimate connections from external users. This is especially true when it comes to File Transfer Protocol (FTP) connections.
FTP is a protocol used to transfer files between two systems, usually from a client computer to a server. In order for the connection to be successful, the software firewall on the FTP server must allow access from the FTP client. If the firewall is not configured properly, it can block the connection and prevent the data from being transferred.
Complete question:In this lab, when you first tried to reach the FTP server from another computer on the network, the connection failed. Why did it fail?
A hardware firewall installed between the client and server did not allow connectivityThe FTP server was not installed correctly in WindowsThe Windows 10 operating system does not support server softwareThe software firewall on the FTP server host did not allow connectivityLearn more about the connection :
https://brainly.com/question/14883923
#SPJ4
