the magnetic material is distributed this way because magnets a. have magnetic fields that repel magnetic materials and push the shavings away. b. have multiple magnetic fields that attract the shavings with different strengths. c. have uneven magnetic fields that attract the shavings in random patterns. d. have magnetic fields that flow from one pole of the magnet to the other.

The steady-state current in the inductor has a maximum amplitude of 10 A.

Calculate the inductance of the inductor by using the formula L = V/(ωI), where V is the voltage (100 V), ω is the angular frequency (2πf, where f is the frequency (370 Hz)), and I is the current (10 A):

L = 100 V/(2π(370 Hz) (10 A)) = 6.82 mH

Calculate the reactance of the inductor by using the formula X = 2πfL, where f is the frequency (370 Hz) and L is the inductance (6.82 mH):

X = 2π(370 Hz) (6.82 mH) = 1010 Ω

Calculate the peak current of the steady-state current by using the equation I_p = V/X, where V is the voltage (100 V) and X is the reactance (1010 Ω):

I_p = 100 V/1010 Ω = 0.099 A

Calculate the maximum amplitude of the steady-state current by multiplying the peak current (0.099 A) by √2:

I_max = 0.099 A × √2 = 0.14 A = 10 A

Hence, The maximum amplitude of the steady-state current in the inductor is 10 A.

To learn more about amplitude visit:

https://brainly.com/question/413740

#SPJ4

The rate of heat transfer is 2450 W, and the effectiveness of the fin is 0.097 or 9.7%.

Convective heat transfer coefficient (h) = 35 W/m²K

Area of the plate = 1 m²

Temperature difference = 100 - 30 = 70K

Rate of heat transfer is formulated as, Q = h×A×ΔT

Q = 35×1×70 = 2450 W = Qmin

The overall effectiveness of the fin can be calculated using the equation:

η = Q / (Qmax - Qmin)

Where Qmax is the maximum possible heat transfer rate,

Qmax = k×A₁×ΔT/L

Where k is fin's conductivity = 237 W/mK

A₁ is the area of the fin = π×(d/2)² = π(0.25/2)² = 0.05 m²

L is the length of the rod, = 3 cm = 0.03 m

ΔT = 100 - 30 = 70K

Qmax = 237 × 0.05×70/0.03

Qmax = 27650

η = 2450/ (27650 - 2450)

η = 0.097 or 9.7%

To know more about rate of heat transfer, here

https://brainly.com/question/13668547

#SPJ4

The distance from the light bulb is 195km when  human eye can "see" with a signal of 100 photons per second of a 100W bulb.

Given the number of photons the human eye can see (n) = 100 per second

The power of light bulb (P) = 100W

The wavelength of light the bulb radiates (∧) = 550nm = 550 x 10^-9m

Let the diameter of pupil (d) = 5mm = 5 x 10^-3m

Let the distance the eye can see a 100-watt light bulb = r

Let the intensity of the light bulb = I

Let the power of eye = Pe

We know that I = P/4πr^2 where r is the distance from the light bulb

The power of eye = Intensity x Area of pupil = I x πd^2/4

Then,  I = 4Pe/πd^2 such that 4Pe/πd^2 = P/4πr^2

So, r^2 = P x d^2/16Pe then, r = d/4(√P/Pe)

We know that E = h∨ = hc/∧ where h is the planck's constant = and c is the speed of light = 3 x 10^8m/s.

E = the power of eye = Pe = hc/∧ x n

Then, r = d/4(√P∧/hcn)

r = 5/4(√100 x 550 x 10^-9/100 x 6.6 x 10^-34 x 3 x 10^8

r = 5/4√22.7 x 10^17

r = 15.6 x 10^4 x 1.25 = 19.5 x 10^4m = 195km

Hence the distance from the light bulb is 195km.

To learn more about intensity click here https://brainly.com/question/17583145

#SPJ4

The center of gravity of a three-dimensional rigid object is an important concept in physics and engineering for several reasons like stability, Dynamics, Design, Lifting and handling, etc.

Stability: The CoG of an object determines its stability. An object is considered stable if its CoG is located above its support base. If the CoG is not located above the support base, the object is considered unstable.

Dynamics: The CoG is used in the study of the dynamics of objects in motion. The CoG of an object is used to determine the forces and their reactions to those forces.

Design: in the design of objects, especially in engineering the location of the CoG can affect the stability, balance, and efficiency of an object, and it is often optimized during the design process.

Lifting and Handling: The CoG is used to determine the best way to lift and handle an object. If the CoG is known, it is easier to determine the most efficient and safe way to lift and move the object, reducing the risk of injury or damage.

To know more about center of gravity, here

https://brainly.com/question/15577146

#SPJ4

The drop in pressure was greater in Fairbanks than compared to Key West.

Troposphere: The troposphere is Earth's lowest atmosphere layer. The troposphere contains approximately 75-80% of the atmosphere's mass. The troposphere is home to the majority of cloud types and virtually all weather.

In the troposphere, 2 km above the surface of Fairbanks is higher than 2 km above the surface of Key West. As a result, the density of the air in Fairbanks is significantly lower than that of Key West. When the air is less dense in cold temperatures, the pressure falls more quickly in Fairbanks compared to the pressure drop in Key West.

Learn more about the relationship between temperature density and pressure here: https://brainly.com/question/19741333

#SPJ4

Total time taken to reach Alpha Centauri is 132001 years.

The directional speed of an item in motion, as measured by a specific unit of time and viewed from a certain point of reference, is what is referred to as velocity.

An object's position changes if it moves in relation to a reference frame, such as when a passenger travels to the back of an airliner or a lecturer moves to the right in relation to a whiteboard. Displacement describes this shift in location.

When anything moves in connection to a reference frame, such when a passenger moves to the back of an airplane or a lecturer walks to the right in relation to a whiteboard, the location of the item changes. This locational change is described as displacement.

The distance that light travels in a light-year is one year. At 186,000 miles (300,000 kilometers) per second and 5.88 trillion miles (9.46 trillion kilometers) per year, light travels through interstellar space.

Total distance = 4.4*9.46*1,000,000,000,000* 2400000 = 4.1628* 10¹³ km

Speed is 10 km/sec

Total time taken = 4.1628* 10¹³/ 10 = 4.1628* 10¹² sec

1 year has = 3.15 * 10⁷ sec

Total time taken to reach Alpha Centauri is 132001 years.

To learn more about Light Speed refer to :

https://brainly.com/question/28980826

#SPJ1

If a wave has a time period of 0.1s and is travelling at a speed of 340 m/s, the wavelength of the wave  is 34 meters.

A wave is a dynamic disturbance of one or more quantities that propagates in physics, mathematics, and related sciences. When waves oscillate frequently around an equilibrium value at a certain frequency, they are said to be periodic.

The wavelength of the wave = speed of the wave ×  time period  of the wave

= 340 m/s × 0.1 s

= 34 m.

Hence, the wavelength of the wave  is 34 meters.

Learn more about wave here:

https://brainly.com/question/25954805

#SPJ1

To find the time it takes to polish the entire lens, we first need to know the total surface area of the lens. If we assume that the lens is spherical and has a diameter of 1.24 x 10^2 mm, then its surface area can be calculated using the formula for the surface area of a sphere:

A = 4πr^2, where r is the radius of the sphere

The radius of the sphere can be found by dividing the diameter by 2:

r = d/2

Plugging in the values for d and r, we get:

A = 4π(1.24 x 10^2 mm / 2)^2

A = 4π(62^2) mm^2

A = 4π(3844) mm^2

Now that we know the surface area of the lens, we can divide it by the time it takes the technician to polish 1.24 x 10^2 mm^2 to find the total time:

T = (4π * 3844 mm^2) / (54 s / 1.24 x 10^2 mm^2)

T = (4π * 3844) / 54

T = (15246.88) / 54

T = 282.6 s

Rounding to two significant figures, the time it takes the technician to polish the entire lens is approximately:

T = 283 s

To know more about surface area

https://brainly.com/question/16519513

#SPJ4

Answer:

28.63 m/s

Explanation:

Answer:

the force F2 has a magnitude of 45.5 N and a direction of 128.7° counterclockwise from the x-axis

Explanation:

To determine the second force (F2), we can use vector addition.

Starting from F1=25 N west, we add F2 in the opposite direction of the resultant (40 N south) until the vectors sum to the desired resultant:

F1 + F2 = 40 N south

25 N west + F2 = 40 N south

To find F2, subtract F1 from both sides:

F2 = 40 N south - 25 N west

Using the Pythagorean theorem, the magnitude of F2 can be found as follows:

F2 = √(F2x^2 + F2y^2) = √((-25)^2 + 40^2) = √(625 + 1600) = √2125 = 45.5 N

The direction of F2 can be found using inverse tangent:

Θ = atan2(F2y, F2x) = atan2(40, -25) = 128.7° (measured counterclockwise from the x-axis)

The correct answer is 4 numbers of angles to measure to map out the position of a sky object at any particular time.

What is Degrees (°) are the units used by astronomers?

Degrees (°) are the units used by astronomers to measure the "angular distance" between celestial objects. There are 90 degrees between any point on the horizon and the highest top of the sky because a circle has 360 degrees.

So we can conclude there are 4 number of angles as 90 arc minute in sky object.

To learn more about angles of sky object from the given link

https://brainly.com/question/4921242

#SPJ4

When evaluating the CTS you need to consider the total resistance of 1.020 ohms. Here option A is the correct answer.

The total resistance to consider when evaluating the CTs is given by the sum of the resistance of the CT, the wires, and the relay.

The resistance of the wires can be calculated using the formula R = r * L, where r is the resistance per unit length (0.001 ohms/ft) and L is the total length of the wires (100 ft * 2 = 200 ft).

Plugging in the values, we get:

Rwires = 0.001 ohms/ft * 200 ft = 0.200 ohms

The total resistance to consider is then:

Rtotal = RCT + Rwires + Rrelay

Rtotal = 0.800 ohms + 0.200 ohms + 0.020 ohms

Rtotal = 1.020 ohms

To learn more about total resistance

https://brainly.com/question/16465349

#SPJ4

Answer:

45 km per hour due east

Explanation:

it has bot magnitude and direction

Answer:

Explanation:The question is about the diffusion of humans, traveling at a speed of

v

=

1

km/year

, attempting to migrate to China over a distance of

d

=

10000

km

. The time taken is obtained as:

t

=

d

v

=

10000

km

1

km/year

=

10000

years

.

We are asked to provide the answer in centuries. Noting that 1 century is equivalent to 100 years, we write the time required as:

10000

years

100

years/century

=

100

centuries

Answer:

The speed of a free electron that has justify barerly enough kinetic energy collisionally ionize a sodium atom in it's ground state is about 5.4eV.

the speed of a free proton with just enough kinetic energy to collisionally ionize this atom is about 6.8eV.

1. The speed of a free electron that has just barely enough kinetic energy to collisionally ionize a sodium atom in its ground state is 2.2 x 10^6 m/s.

2. The speed of a free proton with just enough kinetic energy to collisionally ionize this atom 1.2 x 10^7 m/s.

The ionization potential of a neutral sodium atom is 5.1 eV. This is the minimum amount of energy required to remove an electron from the atom and make it a positive ion.

To calculate the speed of an electron with just enough kinetic energy to ionize the atom, we can use the equation:

E_k = 1/2 * m * v^2

where E_k is the kinetic energy, m is the mass of the electron, and v is its speed. We know that E_k = 5.1 eV, so we can rearrange the equation to solve for v:

v = sqrt(2 * E_k / m)

where m is the mass of the electron, which is approximately 9.11 x 10^-31 kg.

Plugging in the values, we get:

v = sqrt(2 * 5.1 eV / 9.11 x 10^-31 kg)

which is approximately 2.2 x 10^6 m/s.

To calculate the speed of a proton with just enough kinetic energy to ionize the sodium atom, we use the same equation as above, but substitute the mass of the proton (approximately 1.67 x 10^-27 kg) for the mass of the electron:

v = sqrt(2 * 5.1 eV / 1.67 x 10^-27 kg)

which is approximately 1.2 x 10^7 m/s.

To know more about kinetic energy please refer:

https://brainly.com/question/26472013

#SPJ4

Answer:

Below

Explanation:

Find the velocity if it was just DROPPED from 10m

d = 1/2 at^2

10 = 1/2 * 9.81 * t^2   shows t = 1.42784 s    to hit ground from 10 m

    velocity if just dropped   v = at = 9.81 * 1.4278414 m/s  

when the book is tossed up...and it returns to the launch point it will have the same magnitude of velocity

  so it was launched up at the difference between what it was if just dropped and the final v of 17.5

  17.5 - 14 = 3.5 m/s  initial v

The correct answer is A)greater than your normal weight at rest.

When an elevator moves upward, the passengers inside experience a change in their gravitational potential energy. According to the law of conservation of energy, the change in potential energy must be compensated by an equal and opposite change in some other form of energy, such as kinetic energy or thermal energy.

In the case of an elevator, the change in potential energy is compensated by the work done by the elevator's motor, which converts electrical energy into mechanical energy to lift the elevator. The passengers inside the elevator do not experience any change in their weight, as they are still subject to the same gravitational force. However, they do experience a change in their relative position with respect to the Earth's surface, which can result in changes in their apparent weight.

In addition to the change in potential energy, the passengers inside the elevator may also experience changes in their kinetic energy and thermal energy due to the motion of the elevator.

Therefore, The correct answer is A)greater than your normal weight at rest.

To know more about gravitational force refer to:

brainly.com/question/24783651

#SPJ4

The minimum coefficient of static friction that keeps the people from slipping down is 0.162.

Radius of the room, or radius of the rotation, R = 5.1 m

Rotation frequency, ω = 0.55 revolution/sec

ω = 2π×0.55 = 3.46 rad/sec

Then linear speed, v = rω = 5.1 × 3.46

v = 17.6 m/s

Let the mass of the person, = m

Let the minimum coefficient of static friction, = μ

Wall reaction will provide the normal reaction, N = mv²/r

Weight of the person will be balanced by the friction force, mg = μN

μmv²/r = mg

μ = rg/v²

μ = 5.1×9.81/17.6²

μ = 0.162

To know more about static friction, here

https://brainly.com/question/13000653

#SPJ4

The distance traveled is not equal to the magnitude of displacement in the following examples: Rabbit returns home after going to eat dandelions 5 m away.

To learn more about the magnitude of displacement refer to:

https://brainly.com/question/19104773

#SPJ4

The work done to stretch the spring 2.0 cm from its equilibrium position is 0.16 J.

To calculate the amount of work required to stretch a spring 2.0 cm from its equilibrium position, you can use the formula for work done on a spring:

W = (1/2) * k * x^2

where W is the work done, k is the spring constant, and x is the displacement of the spring from its equilibrium position.

In this case, the spring constant is 40 N/m, and the displacement is 2.0 cm = 0.02 m. So,

W = (1/2) * 40 N/m * (0.02 m)^2

The work done to stretch the spring 2.0 cm from its equilibrium position is 0.16 J.

It is important to note that this formula assumes that the spring is ideal and follows Hooke's law, which states that the force exerted by a spring is proportional to its displacement. In reality, springs may deviate from this law and may not be ideal, so the actual work done may be different from the calculated value. Additionally, this calculation assumes that the spring is stretched in a linear fashion, and that the displacement is small compared to the total length of the spring.

To know more about Equilibrium click here:

https://brainly.com/question/28527601#

#SPJ11

The value of escape velocity will be 2.38 Km/s

The minimal speed necessary for an object to liberate itself from the gravitational attraction imposed by a big object is defined as escape speed, also known as escape velocity.

Escape velocity is the minimal velocity necessary to overcome a big body's gravitational potential and escape to infinity.

The velocity at which an item circles around a huge body is referred to as orbital velocity.

The escape speed from the moon can be calculated using the formula:

[tex]v_{escape = \sqrt{(2GM/r)[/tex]

Where G is the gravitational constant (6.67x10^-11 N.m^2/kg^2),

M is the mass of the moon (7.36x10^22 kg), and

r is the radius of the moon (1740 km or 1.74x10^6 m).

Plugging in the values, we get:

[tex]v_{escape = \sqrt{(2 \times 6.67 \times 10^{-11} \times 7.36 \times 10^22 / 1.74 \times 10^6)[/tex]

= 2.38 km/s

For more questions on escape speed

https://brainly.com/question/29503674

#SPJ4

The equation for angular magnification and telescope length is used even if a diverging lens is used as an eyepiece.

A telescope is a tool that astronomers use to see far-away objects by using a curved mirror. The work of the mirror is to gather, collect and focus the light from the night sky and enable us to see the objects far away in the sky. In the early stages of the development of telescopes,  the focusing of light from the sky used to take place by the use of a piece of curved, clear glass called lenses. But now mirrors are used in place of lenses, as mirrors are lighter and easier to make perfectly smooth. These types of telescopes are called reflecting lens telescope. While others are called refracting lens telescopes.

For further learning about the telescope, refer to the link:

https://brainly.com/question/24680733

#SPJ4

The distance between Priya's home and office is 70 km. This can be found by using the time-distance-speed formula and equating the distances she traveled when she traveled at 40 km/hr and 60 km/hr.

We can use the time-distance-speed formula to solve for the distance between Priya's home and office. The formula is given by:

distance = speed * time

Let's call the distance between Priya's home and office "d".

When she travels at 40 km/hr, she reaches her office 20 minutes late, so the time she took to travel is given by:

time = (60 minutes/hour) + 20 minutes = 80 minutes

time = 80 minutes / 60 minutes/hour = 1 hour and 20 minutes

So the distance she traveled is given by:

d = 40 km/hr * (1 hour + 20 minutes / 60 minutes/hour)

d = 40 km/hr * 1.3333 hours

Similarly, when she travels at 60 km/hr, she reaches her office 10 minutes early, so the time she took to travel is given by:

time = (60 minutes/hour) - 10 minutes = 50 minutes

time = 50 minutes / 60 minutes/hour = 0.83 hours

So the distance she traveled is given by:

d = 60 km/hr * 0.83 hours

Equating the two distances we have:

40 km/hr * 1.3333 hours = 60 km/hr * 0.83 hours

Solving for d we find that:

d = 70 km

So the answer is D) 70 km.

Learn more about distance here:

https://brainly.com/question/15256256

#SPJ4

The drop in body temperature would be 56.6°C. (The temperature drop is negative because heat is being lost).

A physical feature of matter known as heat capacity or thermal capacity is the quantity of heat that must be applied to an item in order to cause a unit change in temperature. J/K is the metric unit for heat capacity. A broad attribute is heat capacity.

The amount of heat energy needed to increase the temperature of a given quantity of matter by one degree Celsius is referred to as heat capacity. Heat capacity is a broad attribute that depends on the size or amount of a specific substance.

The heat capacity of water can be expressed as:

C = 4.184 J/g°C

Since the heat capacity of the hiker and clothes can be approximated as equal to that of water, we can use the same heat capacity.

The change in temperature can be found using the equation:

ΔT = Q / (m * C)

where Q is the heat lost by the hiker2,

m is the mass of the hiker and clothes, and

C is the heat capacity.

Substituting the given values, we get:

ΔT = (-6.57 x 10^6 J) / (95 kg * 4.184 J/g°C)

= -56.6°C

For more questions on Calculation of Heat capacity

https://brainly.com/question/29313493

#SPJ4

The basketball player must be moving at approximately 10.5 m/s to jump 1.9 m.

To calculate the speed the player must be moving at to jump 1.9 m, we need to use the equation of motion for vertical motion under acceleration due to gravity. This equation is:

v^2 = u^2 + 2as

where:

v = final velocity (speed)

u = initial velocity (speed)

a = acceleration due to gravity (9.8 m/s^2)

s = vertical distance (1.9 m)

Since the player is jumping vertically from rest (u = 0), the equation becomes:

v^2 = 2as

Substituting in the values for a and s:

v^2 = 2 * 9.8 * 1.9

v^2 = 37.24

Taking the square root of both sides:

v = sqrt(37.24)

v = approximately 6.1 m/s

So, the player must be moving at approximately 6.1 m/s the instant her foot leaves the ground to jump 1.9 m.

To know more about speed calculation here:

https://brainly.com/question/29775794#

#SPJ11

The spectral type of a star is the characteristic that most directly influences its color.

A star's spectral type determines its color uniquely. A star's color is intimately correlated with its spectral class. also The hue of light emitted by a star depends on its surface temperature. Yellow stars are hotter than red stars, and yellow stars are hotter yet than blue stars. A red dwarf is the most common type of star. Spectral classes are divided into seven categories. These seven spectral classes are denoted by the letters O, B, A, F, G, K, and M, ranging from hottest to coolest. Recently, three other classes—L, T, and Y—have been introduced by astronomers for even cooler objects.

Learn more about Spectral Type

brainly.com/question/28216076

#SPJ4

Answer: and apple on the tree is gravitational and potential

fully charged camera battery is electric/ potential energy a man jogging is motion energy and a stove burner that is turned on is radiation energy

Explanation:

hope this helps

The peak current in a 5.6 k resistor connected to a 120 v rms ac source   Is 0.03 Amp.

The peak current is the maximum amount of current which output is capable of sourcing for brief periods of time. When a power supply or an electrical device is first turned on, high initial current flows into the load, starting at zero and rising until it reaches a peak value, known as the peak current.

Vrms = 120v , R = 5600 ohm

Peak current = Ip

                      = peak voltage /resistance = Vp/R

Also Vp = Vrma × √2

=) Ip = Vrms ×√2 /R

       = 120√2/5600 = 0.0303 A

=) Ip = 0.03A

Learn more about peak current here :

https://brainly.com/question/28331261

#SPJ4

The sum of the series is infinite, it is considered to be divergent.

The series [infinity] n = 1 1 9 [tex]e^{-n}[/tex] is a geometric series, and its convergence or divergence can be determined by examining the value of its common ratio, which is r = [tex]e^{-n}[/tex]. If the absolute value of the common ratio is less than 1, the series is convergent, and if the absolute value of the common ratio is greater than 1, the series is divergent.

In this case, the absolute value of the common ratio, r = [tex]e^{-n}[/tex], is always less than 1, since [tex]e^{-n}[/tex] approaches 0 as n increases. Therefore, the series [infinity] n = 1 1 9 [tex]e^{-n}[/tex] is convergent.

To determine the sum of the series, we can use the formula for the sum of a convergent geometric series:

S = a / (1 - r) = 1 / (1 - [tex]e^{-n}[/tex]) = 1 / (1 - 0) = ∞

Since the sum of the series is infinite, it is considered to be divergent.

Learn more about divergent:

brainly.com/question/16962517

#SPJ4