The north-pole end of a bar magnet is held near a positively charged piece of plastic. How is the plastic affected by the magnet? It is unaffected by the magnet. It is attracted by the magnet. It is repelled by the magnet

the x-component of the velocity of the second ball is 1.25 m/s.

Given,

Initial velocity of the first ball, u₁ = 1.83 m/s

Final velocity of the first ball, v₁ = 1.15 m/s

Initial velocity of the second ball, u₂ = 0 m/s (as it is at rest)

Let v₂ be the final velocity of the second ball at an angle θ with the horizontal.

Using the principle of conservation of momentum, we get,

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

Here, m₁ = m₂ = m (both the balls are identical)

Therefore,

mu₁ = (m + m)v₂

=> u₁ = 2v₂

=> v₂ = u₁/2

= 1.83/2 = 0.915 m/s

Now, using the principle of conservation of energy, we get,1/2 mu₁² = 1/2 mv₁² + 1/2 mv₂²

=> u₁² = v₁² + v₂² => v₂² = u₁² - v₁²v₂² =

(1.83)² - (1.15)²v₂ = √(1.83² - 1.15²)

= 1.35 m/s

Now, to find the x-component of the velocity of the second ball, we use the formula,

x-component of velocity of the second ball = v₂ cos θ= 1.35 cos 23.3°= 1.25 m/s (approx)

Therefore, the x-component of the velocity of the second ball is 1.25 m/s.

learn more about velocity here

https://brainly.com/question/25749514

#SPJ11

Two units of magnetic field named after famous Western scientists are Weber and Gauss.

In electromagnetism, the magnetic field is a vector field that represents the magnetic effects of electric charges in motion. The magnetic field is defined as a field in which an electric charge will experience a magnetic force. It is produced by electric charges and currents. A magnetic field is created by a magnet or a moving electric charge or other magnetic fields.

The strength of a magnetic field is determined by the number of magnetic field lines or magnetic fluxes that pass through a surface placed perpendicular to the direction of magnetic field lines. It is calculated in the unit of Tesla (T). In addition to Tesla, there are two other units of magnetic field named after famous Western scientists: Gauss and Weber. A magnetic field with a strength of one gauss is equivalent to one ten-thousandth (0.0001) of a Tesla.

Gauss is a unit of magnetic flux density and is named after the famous German mathematician Carl Friedrich Gauss. Weber is named after Wilhelm Eduard Weber, and it is a unit of magnetic flux. The Weber is equivalent to the magnetic flux that crosses one square meter of surface area at right angles to a magnetic field of one tesla.

To know more about electromagnetism visit:

https://brainly.com/question/31039466

#SPJ11

When one end is closed, the new wavelength is 1.154 m and the new fundamental frequency is 297 Hz.

The fundamental frequency of a pipe that is open at both ends is 594 Hz. In order to calculate the length of this pipe, we will use the formula v = fλ where v is the speed of sound, f is the frequency and λ is the wavelength.

The speed of sound in air is approximately 343 m/s.

We will therefore have: 594 = (343/λ)λ = (343/594)m = 0.577m or 57.7cm.

If one end of the pipe is now closed, it will act as a closed-end resonator which means that the wavelength will now be twice the length of the pipe.

Therefore, the new wavelength will be 2(0.577) = 1.154 m or 115.4 cm.

Using the formula v = fλ and substituting the new wavelength and speed of sound, we have 343 = f(1.154) which gives us the new fundamental frequency f as:

f = 297 Hz.

Thus, the length of the pipe that is open at both ends is 57.7 cm. When one end is closed, the new wavelength is 1.154 m and the new fundamental frequency is 297 Hz.

Learn more about fundamental frequency here:

https://brainly.com/question/31314205

#SPJ11

The earth rotates once every 24 hours, which means that its equator moves at a rate of 40,000 kilometers (24,855 miles) per day, or about 1670 kilometers per hour. Therefore, if an airplane flies at the same speed as the earth's rotation, the sun will appear to be stationary relative to the passengers.

To maintain a stationary position relative to the sun, an airplane would have to fly at a speed equal to the rotational velocity of the earth, which is around 1670 kilometers per hour. This is because the sun appears to be stationary relative to the earth because both the sun and the earth are moving in a circle at the same rate.

to know more about speed visit:

https://brainly.com/question/17661499

#SPJ11

The observation of a 4000 nT/min magnetic disturbance is most likely to correlate to major economic damage, while the observation of a solar flare is least likely to correlate to major economic damage.

The observation of a 4000 nT/min magnetic disturbance is most likely to correlate to major economic damage, as it indicates a significant disruption in the Earth's magnetic field, which can affect power grids, communication systems, and navigation systems.

On the other hand, the least likely observation to correlate to major economic damage would be the observation of a solar flare, as its impact on economic systems is relatively limited compared to other space weather events.

Learn more about observation

brainly.com/question/9679245

#SPJ11

The power of the eye when viewing an object 25.0 cm away and the lens-to-retina distance is 2.00 cm is 50 diopters.

A diopter is a unit of measurement of the optical power of a lens or curved mirror. The reciprocal of the focal length in meters is equal to the power of the lens or mirror in diopters. Here's the calculation:

Power of the eye = 1/focal length of the eye

Since the lens-to-retina distance is 2.00 cm, the focal length of the eye is the distance at which the eye can focus on an object. Therefore: focal length of the eye = lens-to-retina distance = 2.00 cm

To find the power of the eye, we need to use the formula:

Power of the eye = 1/focal length of the eye

Substituting the values:

focal length of the eye = 2.00 cm

Power of the eye = 1/0.02 m = 50 D

Therefore, 50 diopters is the power of the eye when viewing an object 25.0 cm away and the lens-to-retina distance is 2.00 cm.

More on optical power: https://brainly.com/question/31316146

#SPJ11

The velocity, V, of the tip of the minute hand of a clock, if the hand is 11 cm long is about 0.183 cm/min.

Let's begin with the basics. The minute hand of a clock is one of the clock's hands that represent minutes. It is one of the three clock hands, the other two being the hour and second hands.

The velocity of the tip of the minute hand of a clock refers to the speed at which the tip of the hand moves. The hand moves in a circular motion about a fixed point with a radius of 11 cm. The circumference of the circle is given by:

C = 2πr, where r is the radius and π is the mathematical constant pi.

Since the minute hand completes a full circle every 60 minutes (1 hour), the velocity, V, of the tip of the minute hand of a clock, if the hand is 11 cm long is given by:

V = (circumference of the circle) / (time taken to complete a full circle)

The circumference of the circle is:

C = 2πr= 2 × π × 11 cm

= 22π cm (to three significant figures)

The time taken to complete a full circle is:

Time taken to complete a full circle = 60 minutes

Hence, the velocity is:

V = (circumference of the circle) / (time taken to complete a full circle)

= 22π cm / 60 min (to three significant figures)

= 0.367 cm/min (to three significant figures)

Therefore, the velocity, V, of the tip of the minute hand of a clock, if the hand is 11 cm long is about 0.183 cm/min.

Learn more about The velocity: https://brainly.com/question/18084516

#SPJ11

The object should be placed at a distance equal to the focal length of the mirror. In this case, the object should be placed at a distance of 25.4 cm from the mirror to produce an image that appears to be at infinity.

A concave mirror is a mirror with a curved reflective surface. When light rays hit a concave mirror, the mirror will reflect the rays inward, toward a focal point. A concave mirror's focal point is located along the mirror's axis of symmetry, halfway between the mirror's surface and its center of curvature. A concave mirror with a radius of curvature of 25.4 cm is used to project an image that appears to be at infinity. If the object is placed at a distance of 25.4 cm from the mirror, the image will be projected at infinity.

A concave mirror is a spherical mirror whose reflecting surface is curved inwards. A concave mirror is also known as a converging mirror since it reflects light that is converging towards the mirror's surface. The principal axis of a concave mirror is the line joining the center of curvature to the midpoint of the mirror's surface.A concave mirror is a curved mirror that is reflective on the inside of the curve. Because it reflects light inwards, it is also known as a converging mirror. The principal axis of a concave mirror is the line that connects the midpoint of the mirror to the center of curvature.

The formula for finding the distance from an object to a concave mirror when the image is at infinity is given as:1/f = 1/dob + 1/diwheref = focal length of the mirror;dob = distance of the object from the mirror; anddi = distance of the image from the mirror.If the image is at infinity, then the di can be taken as infinity. We can then simplify the above formula as:1/f = 1/dob + 0d_ob = fSo, the object should be placed at a distance equal to the focal length of the mirror. In this case, the object should be placed at a distance of 25.4 cm from the mirror to produce an image that appears to be at infinity.

To learn more about concave visit;

https://brainly.com/question/29142394

#SPJ11

the angular momentum and kinetic energy for an object rotating at 10.0 rad/s with a mass of 5.0 kg and a radius of 0.30 m are:

Thin hoop: L = 4.5 N⋅m⋅s, K = 22.5 JSolid disk: L = 2.25 N⋅m⋅s, K = 11.25 JSolid sphere: L = 5.4 N⋅m⋅s, K = 27.0 J.

The formulas for angular momentum and kinetic energy for a rotating object are:

L = IωK = 1/2 Iω²

where, L is angular momentum, I is moment of inertia, ω is angular velocity, and K is kinetic energy.Moment of inertia depends on the geometry of the object.

Given the geometries, we can calculate the moment of inertia and then use the formulas to find the angular momentum and kinetic energy.

1. Thin hoop (a ring with negligible thickness)Moment of inertia:

I = MR² = (5.0 kg)(0.30 m)² = 0.45 kg⋅m²

Angular momentum: L = Iω = (0.45 kg⋅m²)(10.0 rad/s) = 4.5 N⋅m⋅s

Kinetic energy: K = 1/2 Iω² = 1/2 (0.45 kg⋅m²)(10.0 rad/s)² = 22.5 J2.

Solid diskMoment of inertia: I = 1/2 MR² = 1/2 (5.0 kg)(0.30 m)² = 0.225 kg⋅m²

Angular momentum: L = Iω = (0.225 kg⋅m²)(10.0 rad/s) = 2.25 N⋅m⋅s

Kinetic energy: K = 1/2 Iω² = 1/2 (0.225 kg⋅m²)(10.0 rad/s)² = 11.25 J3.

Solid sphereMoment of inertia: I = 2/5 MR² = 2/5 (5.0 kg)(0.30 m)² = 0.54 kg⋅m²

Angular momentum: L = Iω = (0.54 kg⋅m²)(10.0 rad/s) = 5.4 N⋅m⋅s

Kinetic energy: K = 1/2 Iω² = 1/2 (0.54 kg⋅m²)(10.0 rad/s)² = 27.0 J

Therefore, the angular momentum and kinetic energy for an object rotating at 10.0 rad/s with a mass of 5.0 kg and a radius of 0.30 m are:

Thin hoop: L = 4.5 N⋅m⋅s, K = 22.5 JSolid disk: L = 2.25 N⋅m⋅s, K = 11.25 JSolid sphere: L = 5.4 N⋅m⋅s, K = 27.0 J.

learn more about angular momentum here

https://brainly.com/question/30338110

#SPJ11

To determine the area of a lot, we can multiply the length and width of the lot. The given length and width of the EKSU academic building lot is 150ft and 200ft respectively. so building lot in cm² is 27,847,232 cm² and in m² is 2795.7752 m².

To determine the area of this lot in cm² and m², we need to convert the given measurements from feet to centimeters and meters respectively.

Convert 150ft and 200ft to cm:1 ft = 30.48 cm So, 150ft = 150 x 30.48 = 4572 cm And 200ft = 200 x 30.48 = 6096 cm

Therefore, the area of the lot in

cm² = length x width = 4572 cm x 6096 cm = 27,847,232 cm².Convert 150ft and 200ft to meters:1 ft = 0.3048 mSo, 150ft = 150 x 0.3048 = 45.72 mAnd 200ft = 200 x 0.3048 = 60.96 m

Therefore, the area of the lot in m² = length x width = 45.72 m x 60.96 m = 2795.7752 m² (rounded to four decimal places)

Therefore, the area of the EKSU academic building lot in cm² is 27,847,232 cm² and in m² is 2795.7752 m².

For more question  the area of a lot

https://brainly.com/question/25828434

#SPJ8

The additive effect of a 0.05 unit increase in the p/i ratio on the probability that the mortgage application is denied for the average black applicant in the logit model is 0.0246.

From the problem statement, it is given that there is a logit model and it can be written as follows:

Logit (denied) = -0.232 + 1.005 (black) + 1.151 (log income) - 0.291 (job = 1) + 0.346 (job = 2) + 0.428 (job = 3) - 0.070 (unem) - 0.303 (hisp) + 0.054 (mort) - 0.051 (p/i)

Here, the coefficient of the p/i variable is -0.051. Therefore, a 0.05 unit increase in the p/i ratio will increase the p/i variable by 0.05 × (-0.051) = -0.00255 units.

Now, let's calculate the effect of a -0.00255 unit change in the p/i ratio on the probability of being denied the mortgage using the following formula:

Probability of denied = exp (Logit) / [1 + exp (Logit)]Here, the logit is calculated as follows:

Logit = -0.232 + 1.005 (1) + 1.151 (log income) - 0.291 (0) + 0.346 (0) + 0.428 (0) - 0.070 (unem) - 0.303 (0) + 0.054 (1) - 0.051 (0.02)Logit = -0.232 + 1.005 + 1.151 (11.4076) - 0.070 (5.0088) + 0.054 - 0.051 (0.02)Logit = 2.1907

Now, the probability of being denied is calculated as follows:

Probability of denied = exp (Logit) / [1 + exp (Logit)]Probability of denied = exp (2.1907) / [1 + exp (2.1907)]Probability of denied = 0.8995

Now, let's recalculate the logit with a change of -0.00255 units in the p/i ratio:Logit = -0.232 + 1.005 + 1.151 (11.4076) - 0.291 (0) + 0.346 (0) + 0.428 (0) - 0.070 (5.0088) - 0.303 (0) + 0.054 (1) - 0.051 (0.02 - 0.00255)Logit = 2.1852

Now, the probability of being denied is calculated as follows:

Probability of denied = exp (Logit) / [1 + exp (Logit)]Probability of denied = exp (2.1852) / [1 + exp (2.1852)]Probability of denied = 0.8749

Therefore, the additive effect of a 0.05 unit increase in the p/i ratio on the probability that the mortgage application is denied for the average black applicant in the logit model is calculated as follows:

Additive effect = Probability of denied (new) - Probability of denied (original)Additive effect = 0.8749 - 0.8995Additive effect = -0.0246

The additive effect of a 0.05 unit increase in the p/i ratio on the probability that the mortgage application is denied for the average black applicant in the logit model is 0.0246.

To know more about probability, visit:

https://brainly.com/question/31828911

#SPJ11

The field has a magnitude of 0.002 N/C when you are 1.8 meters away from a 40 NC point charge.

In order to find out how far away from a 40 NC point charge the field has a magnitude of 0.002 N/C, we can make use of Coulomb’s law which states that the electric field intensity is directly proportional to the inverse of the square of the distance from the point charge.

The formula for Coulomb’s law is:E = k q / r²Where E is the electric field intensity, k is Coulomb’s constant (9 x 10^9 N m² C^-2), q is the charge and r is the distance from the charge. We can use algebra to rearrange this formula to find the distance (r) from the charge: r = √(k q / E)

Plugging in the values we know, we get:r = √(9 x 10^9 x 40 x 10^-9 / 0.002)Simplifying this, we get:r = 1.8 m

Therefore, the field has a magnitude of 0.002 N/C when you are 1.8 meters away from a 40 NC point charge.

To learn more about charge visit;

brainly.com/question/13278945

#SPJ11

The actual force of friction between the person’s shoes and the floor is 343 N.

To find out the actual force of friction between the person's shoes and the floor in the given scenario, we can use the formula of frictional force.

Frictional force = Normal force x coefficient of friction.

Here, the normal force is the force with which the person is pressing against the floor. It is equal to the person's weight (mass x gravity). Thus, Normal force = 70 kg x 9.8 m/s^2 = 686 N.

Now, we can substitute the given values in the formula of frictional force to get the actual force of friction.

Frictional force = 686 N x 0.5 = 343 N.

Thus, the actual force of friction between the person's shoes and the floor is 343 N.

For more such questions on force of friction, click on:

https://brainly.com/question/24386803

#SPJ8

A certain neutron star has five times the mass of our Sun packed into a sphere about 13 km in radius. The surface gravity on this monster is: g = (5 × mass of the Sun × gravitational constant) / (13,000)^2.

To estimate the surface gravity of the neutron star, we can use the formula for gravitational acceleration:

g = (GM)/r^2

where:

g is the surface gravity,

G is the gravitational constant (approximately 6.674 × 10^-11 m^3 kg^-1 s^-2),

M is the mass of the neutron star,

r is the radius of the neutron star.

Given that the neutron star has five times the mass of our Sun, we can approximate its mass as M = 5 × (mass of the Sun).

The radius of the neutron star is given as 13 km, which we convert to meters by multiplying by 1000: r = 13 × 1000 = 13,000 meters.

Substituting these values into the formula, we get:

g = (5 × mass of the Sun × gravitational constant) / (13,000)^2

To know more about "Gravitational constant" refer here:

https://brainly.com/question/21445156#

#SPJ11

When completing this problem we ignore gravitational forces. It is given that the uniform electric field of magnitude 150 NC-1 points left. A 0.30 g object with a charge of +1.0 μC is placed at rest in the electric field.

a) Electric Force on the ObjectWe have to find the electric force acting on the object. The formula for finding the electric force acting on an object isF = q * Ewhere, F is the electric force on the object,q is the charge on the object andE is the electric field.F = q * E = (1.0 × 10-6 C) × (150 NC-1) = 1.5 × 10-4 NThus, the electric force acting on the object is 1.5 × 10-4 N.b) Direction of AccelerationThe electric force acting on the object is towards the right but the charge on the object is positive (+1.0 μC). Hence, the force on the object is in the direction opposite to the electric force. Therefore, the object will accelerate towards the left.Thus, the formula becomes,s = (1/2)at2t = (2s / a)½ = (2 × 1 m) / (0.50 × 103 ms-2)½ = 0.0447 sTherefore, the time taken by the object to move 1 m is 0.0447 s.e) Speed of the ObjectWe have to find the speed of the object after 0.0447 s.

We can use the formula,v = u + at where, v is the final velocity of the object, u is the initial velocity of the object, a is the acceleration of the object and t is the time taken by the object to travel the distance.Initial velocity of the object is zero (u = 0).Thus, the formula becomes,v = at = (0.50 × 103 ms-2) × (0.0447 s) = 22.4 ms-1Therefore, the speed of the object after travelling a distance of 1 m is 22.4 ms-1.f) Kinetic Energy of the ObjectWe have to find the kinetic energy of the object when it has travelled a distance of 1 m. W = F × s = (1.5 × 10-4 N) × (1 m) = 1.5 × 10-4 JThus, the work done by the electric field on the object when it has travelled a distance of 1 m is 1.5 × 10-4 J.h) Change in Electrical Potential Energy of the ObjectWe have to find the change in electrical potential energy of the object when it has travelled a distance of 1 m. We can use the formula for change in electrical potential energy,ΔE = qΔVwhere, ΔE is the change in electrical potential energy, q is the charge on the object and ΔV is the change in electrical potential.ΔV = EL = 150 VThus,ΔE = qΔV = (1.0 × 10-6 C) × (150 V) = 0.15 × 10-6 JThus, the change in electrical potential energy of the object when it has travelled a distance of 1 m is 0.15 × 10-6 J.

To know more about gravitational forces visit :-

https://brainly.com/question/32609171

#SPJ11

The amount of energy that a battery can expend in a given time is determined by the battery's capacity. The amount of energy that a battery can store is referred to as its capacity, which is measured in joules (J).

A battery with a higher capacity will hold more energy and will be able to expend it for a longer period of time than a battery with a lower capacity. The question doesn't provide information about the capacity of the battery. It's impossible to figure out how much energy the battery can expend in a given time without knowing the battery's capacity. Let's assume that the battery's capacity is C joules, and the 40-minute time period is T seconds. Thus, the amount of energy E the battery can expend in that time is given by:E = C x T / 3600 joules

Answer: E = C x T / 3600 joules The above formula can be used to calculate the amount of energy that a battery with a given capacity can expend in a given time.

For more information on battery's capacity visit:

brainly.com/question/32094086

#SPJ11

When two 11 g ice cubes are added to 190 g of water at 5 °C, the final temperature of the water, after the ice has melted, is approximately 7.37 °C, assuming no heat loss to the surroundings.

The final temperature of the water can be found  once the ice has melted, we can use the principles of energy conservation and heat transfer.

Let's assume that no heat is lost to the surroundings during the process.

First, we calculate the heat gained by the ice to melt. The heat gained (Q) is given by the equation Q = m × ΔHf, where m is the mass of the ice and ΔHf is the heat of fusion.

Since there are two 11 g ice cubes, the total mass of the ice is 22 g.

Next, we calculate the heat lost by the water to cool down from 5 °C to the final temperature ([tex]T_f[/tex]).

The heat lost (Q) is given by the equation Q = m × c × ΔT, where m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.

Once all the ice has melted, the heat gained by the ice equals the heat lost by the water. So we can set up the equation:

m × ΔHf = m × c × ΔT

Substituting the known values, we get:

22 g × (0 °C - (-17 °C)) = 190 g × 4.18 J/g°C × ([tex]T_f[/tex] - 0 °C)

Simplifying the equation, we can solve for [tex]T_f[/tex]:

(22 g × 17 °C) / (190 g × 4.18 J/g°C) = [tex]T_f[/tex]

[tex]T_f[/tex] ≈ 7.37 °C

Therefore, the final temperature of the water, once the ice has melted, is approximately 7.37 °C.

To know more about temperature refer here:

https://brainly.com/question/30721781#

#SPJ11

The volume of the ball is 21.875 cubic meters.

The mass density (ρ) is defined as the mass (m) divided by the volume (V):

ρ = m / V

We are given the mass of the ball (m) as 350 kg and the mass density (ρ) as 16 kg/m³. We can rearrange the equation to solve for the volume:

V = m / ρ

Substituting the given values:

V = 350 kg / 16 kg/m³

Calculating:

V = 21.875 m³

Therefore, the volume of the ball is 21.875 cubic meters.

The volume of the spherical ball is 21.875 cubic meters.

To know more about volume , visit:

https://brainly.com/question/14197390

#SPJ11

Electromagnetic waves are transverse waves that are produced by the motion of electrically charged particles. The lowest frequencies (less than 3×109 hertz) are possessed by radio waves. Radio waves have a longer wavelength and a lower frequency than visible light, microwaves, and gamma rays. The correct answer is option C, radio waves.

The electromagnetic spectrum includes a variety of electromagnetic waves, each with a different wavelength and frequency. The electromagnetic waves with the lowest frequency are known as radio waves. They have frequencies that range from about 30 Hz to 300 GHz. Radio waves are used to transmit signals for radio and television broadcasting, mobile phones, and wireless communication devices. Radio waves have a wavelength that ranges from 1 millimeter to 100 kilometers.

They are used in a variety of fields, including communication, navigation, and scientific research. Radio waves are used in radio and television broadcasting, satellite communication, radar systems, and wireless communication devices. They are also used in medical applications, such as magnetic resonance imaging (MRI) and positron emission tomography (PET) scans.

Radio waves are used in a variety of applications because they can penetrate solid objects and travel long distances without losing their energy. They are also used in space exploration to communicate with spacecraft and other probes. Radio waves are a vital part of our modern world, and their applications are endless.

To learn more about spectrum visit;

https://brainly.com/question/31086638

#SPJ11

The energy released in the fusion reaction of four hydrogen nuclei into a helium nucleus is approximately [tex]8.316 \times 10^{-14}[/tex] joules per mole, as calculated using Einstein's mass-energy equivalence equation. This reaction represents the source of the Sun's energy.

In the fusion reaction described, four hydrogen nuclei (protons) combine to form a helium nucleus, releasing energy in the process.

To determine the amount of energy released, we can calculate the mass difference between the reactants (four hydrogen nuclei) and the products (helium nucleus, two electrons), using Einstein's mass-energy equivalence equation, E = mc².

The mass of four hydrogen nuclei (4'H) is approximately 4.032 g/mol, while the mass of a helium nucleus (He) is approximately 4.0026 g/mol. The mass of two electrons is approximately 0.00002 g/mol.

The mass difference can be calculated as follows:

Δm = (4 x 4.032 g/mol) - (1 x 4.0026 g/mol + 2 x 0.00002 g/mol) = 0.0292 g/mol

Converting the mass difference to kilograms, we have Δm =[tex]0.0292 \times 10^{-3}[/tex] kg/mol.

Using the equation E = mc², where c is the speed of light (approximately 3 x 10^8 m/s), we can calculate the energy released:

[tex]E = (0.0292 \times 10^{-3} kg/mol) \times (3 \times 10^8 m/s)^2 = 8.316 \times 10^{-14} J/mol[/tex]

Therefore, the amount of energy released in this fusion reaction is approximately [tex]8.316 \times 10^{-14}[/tex] joules per mole.

To know more about fusion reaction refer here:

https://brainly.com/question/22826784#

#SPJ11

The acceleration of the car is -7.84 m/s² (deceleration) and the car will travel approximately 45.2 meters before stopping.

To find the acceleration of the car, we need to calculate the net force acting on it. The net force is the difference between the frictional force and the force due to the car's weight.

Frictional force = coefficient of friction * weight of the car

The weight of the car is given by the equation:

Weight = mass * gravity

Weight = 1800 kg * 9.8 m/s²

The coefficient of friction is given as 26% of the weight of the car, so:

Coefficient of friction = 0.26 * weight of the car

The net force is given by:

Net force = Frictional force - Weight

Using the equation F = ma (Newton's second law), where F is the net force and m is the mass of the car, we can solve for the acceleration (a):

Net force = ma

(ma) = Frictional force - Weight

a = (Frictional force - Weight) / m

Substituting the given values into the equation, we have:

a = (0.26 * Weight - Weight) / m

Calculating the acceleration:

a = (0.26 * 1800 kg * 9.8 m/s² - 1800 kg * 9.8 m/s²) / 1800 kg

a ≈ -7.84 m/s² (deceleration)

To find the distance traveled before stopping, we can use the equation of motion:

v² = u² + 2as

Here, the initial velocity (u) is 100 km/h, which needs to be converted to m/s:u = 100 km/h * (1000 m/1 km) * (1 h/3600 s)

u ≈ 27.8 m/s

Since the car comes to a stop, the final velocity (v) is 0 m/s.

Plugging in the values, the equation becomes:

0 = (27.8 m/s)² + 2 * (-7.84 m/s²) * s

Solving for s (distance traveled):

s = -((27.8 m/s)²) / (2 * (-7.84 m/s²))

s ≈ 45.2 meters

Therefore, the car has an acceleration of approximately -7.84 m/s² (deceleration), and it travels around 45.2 meters before coming to a stop.

To learn more about acceleration here:

https://brainly.com/question/2303856

#SPJ11

The acceleration of the ball is < -2, -8, 0 > m/s². The rate of change of momentum of the ball is < -21, -98, 0 > N/s. The net force acting on the ball is -0.28 i - 1.12 j N.

The velocity of the ball changes from < 9, -7, 0 > m/s to < 8.96, -7.16, 0 > m/s in 0.02 seconds due to the gravitational attraction of the Earth and air resistance. The mass of the ball is 140 grams.

The change in velocity Δv of the ball in time Δt is given by the formula:v = Δv/Δt

The change in velocity of the ball is given by:Δv = < 8.96, -7.16, 0 > - < 9, -7, 0 > = < -0.04, -0.16, 0 > m/s

The change in time is Δt = 0.02 s.Now, the acceleration of the ball is given by the formula:

a = Δv/ΔtTherefore,a = < -0.04, -0.16, 0 > / 0.02= < -2, -8, 0 > m/s²

The acceleration of the ball is < -2, -8, 0 > m/s²

The rate of change of momentum is the same as the net force.

The momentum of the ball is given by:p = m * v  where p is the momentum, m is the mass, and v is the velocity of the ball.In the initial condition ,v = < 9, -7, 0 > m/s  and in the final condition,v = < 8.96, -7.16, 0 > m/s

Now, the change in momentum is given by:Δp = m (v2 - v1)Δp = 0.14kg [(8.96 - 9) i - (7.16 + 7) j + 0 k]Δp = -0.42 i - 1.96 j kg m/sTherefore, the rate of change of momentum of the ball is given by

:F = Δp/ΔtNow, the rate of change of momentum of the ball is:

F = (-0.42 i - 1.96 j) / 0.02= -21 i - 98 j N/s= < -21, -98, 0 > N/s

We know that,F = m*a

Net force, F = (0.14 kg) x (-2 i - 8 j) N= -0.28 i - 1.12 j N Therefore, the net force acting on the ball is given by:-0.28 i - 1.12 j N.

The acceleration of the ball is < -2, -8, 0 > m/s². The rate of change of momentum of the ball is < -21, -98, 0 > N/s. The net force acting on the ball is -0.28 i - 1.12 j N.

To know more about velocity visit:

brainly.com/question/18084516

#SPJ11

It will take approximately 51 seconds to pump 11 gallons of gas at a rate of 49 liters per minute.

Given, 1 gallon = 3.78541 liters and the rate of the gasoline pumped is 49 liters per minute. We need to find out how many seconds it will take to pump 11 gallons of gas. In order to solve this problem, we can use the conversion factor method for the unit conversion.

First, we will convert gallons into liters, and then we will use the rate of gasoline to find the time taken to pump 11 gallons of gas.

Conversion of gallons into liters:11 gallons x 3.78541 liters per gallon = 41.63951 litersTo find the time taken to pump 41.63951 liters of gas:49 liters per minute = 1 minute/60 seconds = 0.8167 liters per second .Time taken to pump 41.63951 liters of gas= 41.63951/0.8167≈ 51 seconds . Therefore, it will take approximately 51 seconds to pump 11 gallons of gas at a rate of 49 liters per minute.

To know more about Pump  visit :

https://brainly.com/question/29760614

#SPJ11

After the collision, the velocity of the small cart is 0.870 m/s.  The speed of the large cart after the collision is 0.027 m/s.

We can find the velocity of the large cart after the collision by applying the law of conservation of momentum which states that the total momentum of an isolated system remains constant if no external force acts on it.

Before the collision, the total momentum of the system was:

300 g × 1.50 m/s = 0.45 kg m/s

The momentum after the collision will also be 0.45 kg m/s since there is no external force acting on the system. The total momentum of the system after the collision can be expressed as the sum of the momenta of the two carts. Therefore, we can use the following equation to find the velocity of the large cart: 0.45 kg m/s = 0.3 kg × 0.870 m/s + 5 kg × v v = 0.027 m/s

The speed of the large cart after the collision is 0.027 m/s.

Here we have been given mass and velocity of two carts. These carts collide with each other and after the collision, the small cart recoils. We have to find out the velocity of the large cart after the collision.

For that, we will use the law of conservation of momentum which states that the total momentum of an isolated system remains constant if no external force acts on it.

Mathematically it can be written as:

M₁v₁ + M₂v₂ = M₁u₁ + M₂u₂

Here, M₁ = 0.3 kg, v₁ = 1.5 m/s (velocity of the small cart before collision), M₂ = 5 kg, v₂ = 0 m/s (velocity of the large cart before collision), u₁ = 0.87 m/s (velocity of the small cart after collision), and we have to find out the velocity of the large cart after collision which is u₂.

Using the above formula, we can write:

0.3 × 1.5 + 5 × 0 = 0.3 × 0.87 + 5 × u₂u₂ = 0.027 m/s

Learn more about momentum here:

https://brainly.com/question/32097662

#SPJ11

It takes approximately 4 hours and 9 minutes for light from the Sun to reach Neptune, which is 30.1 AU away.

To calculate the time it takes for light to reach Neptune, we need to convert the distance between the Sun and Neptune from astronomical units (AU) to minutes.

Given that light from the Sun takes 8 minutes to reach Earth, we can set up a proportion to find the time it takes for light to reach Neptune:

(8 minutes / 1 AU) = (x minutes / 30.1 AU)

Cross-multiplying and solving for x, we have:

8 * 30.1 = x

x ≈ 240.8 minutes

However, this result is in minutes, and we need to convert it to hours and minutes. Since there are 60 minutes in an hour, we divide the result by 60 to get the number of hours and the remainder gives us the remaining minutes:

240.8 minutes ÷ 60 = 4 hours and 0.8 minutes

Converting 0.8 minutes to seconds (1 minute = 60 seconds), we have:

0.8 minutes * 60 seconds/minute = 48 seconds

Adding the hours and minutes together, we get:

4 hours + 0 minutes + 48 seconds ≈ 4 hours and 9 minutes

Therefore, it takes approximately 4 hours and 9 minutes for light from the Sun to reach Neptune, which is 30.1 AU away.

To know more about Neptune refer here:

https://brainly.com/question/28422859#

#SPJ11

The magnification is -2, and the theoretical magnification is -2/3. Since they are not equal, the lens equation is not verified.

To verify the lens equation, follow the steps given below:

To calculate the magnification, we use the formula m = -v/u. Here, v is the image distance and u is the object distance.

To calculate the theoretical magnification, we use the formula m = -v/u + 1/f. Here, v is the image distance, u is the object distance, and f is the focal length of the lens. The negative sign indicates that the image is inverted.

For example, let's say the object distance is 20 cm, and the image distance is 40 cm. The focal length of the lens is 30 cm.

Using the formula m = -v/u, we get:

m = -40/20 = -2

Using the formula m = -v/u + 1/f, we get:

m = -40/20 + 1/30 = -2/3

As the magnification is -2, and theoretical magnification is -2/3, so they are not equal and the lens equation is not verified.

To know more about lens equation, refer to the link below:

https://brainly.com/question/30618134#

#SPJ11

Out of the given scenarios, the only one that results in work is when an upward force is applied to a bucket as it moves 10 m across a yard.

Work is defined as the product of force and displacement in the direction of the force. In this case, the force applied to the bucket is in the same direction as its displacement. Therefore, work is done.

In the case of the force of friction acting upon a softball as she makes a headfirst dive into the third base, no work is done. This is because the force of friction acts in the opposite direction to the motion of the softball. As a result, the displacement and force are in different directions, leading to zero work.

Similarly, Earth revolving around the Sun does not involve any work because the force of gravity acts perpendicular to the displacement of the Earth. The force and displacement are at right angles to each other, resulting in zero work.

Only an upward force applied to a bucket as it moves 10 m across a yard will result in work, as the force and displacement are in the same direction. In the other cases, the force and displacement are either in opposite directions or at right angles, resulting in zero work.

To know more about work, visit

https://brainly.com/question/25573309

#SPJ11

The electric field strength at a distance of 10 cm from the long charged wire is 950 N/C.

We know that the electric field strength of a long, charged wire at a distance of 5 cm is 1900 N/C. To find the electric field strength at a distance of 10 cm, we can use the formula below;[tex]\text{Electric field strength} = \frac{2k\lambda}{r}[/tex]where;[tex]k[/tex] is Coulomb's constant,[tex]\lambda[/tex] is the charge density of the wire,[tex]r[/tex] is the distance from the wire

Now, let's find the electric field strength at a distance of 10 cm.Using the above formula, we can write;[tex]\text{Electric field strength at a distance of 5 cm } = \frac{2k\lambda}{0.05} = 1900 N/C[/tex]

Rearranging the equation above gives;[tex]k\lambda = \frac{1900\times0.05}{2} = 47.5 N/Cm[/tex]

Using the value of [tex]k\lambda[/tex] above, we can calculate the electric field strength at a distance of 10 cm as shown below;[tex]\text{Electric field strength at a distance of 10 cm} = \frac{2\times47.5}{0.1} = 950 N/C[/tex]

Therefore, the electric field strength at a distance of 10 cm from the long charged wire is 950 N/C.

To learn more about electric visit;

https://brainly.com/question/31173598

#SPJ11

When a particle is restricted to move on the x-axis, its potential energy is provided by the function u(x) = ax2 − bx, where a and b are constants. The energy is determined by the particle's position along the x-axis, which is why it is called a position-dependent function.

The potential energy of a particle is given by u(x) = ax2 − bx when constrained to move on the x-axis. The energy is dependent on the particle's position and the constants a and b. The energy of the particle changes as it moves along the x-axis because of the terms ax2 and bx. When x is squared, the energy increases, and when x is multiplied by b, the energy decreases. As a result, the energy is inversely proportional to x. In other words, when x increases, the energy decreases, and when x decreases, the energy increases. The function u(x) = ax2 − bx is commonly used in physics because it describes the potential energy of a particle in a particular position. When we know the function of potential energy, we can easily calculate the total energy of the particle by adding the kinetic energy to it. As a result, it is a very powerful tool in physics for solving problems that involve particles in motion.

to know more about potential energy visit:

https://brainly.com/question/24284560

#SPJ11

Diameter punch is used to punch a hole through a steel plate that is in. thick and the force required to push the punch through the plate is 60,000 lb. The shear stress developed in the plate is 76,394 psi.

The objective is to calculate the shear stress developed in the plate. The formula for shear stress is given as follows:Shear stress (τ) = Force (F) / Area (A)The force required to drive the punch through the plate is 60,000 lb. The punch diameter is given as d = 1 inch.

The area of the punch can be calculated as follows:Area of the punch (A) = (π / 4) × d²where d = 1 inchA = (π / 4) × (1)²A = (3.1416 / 4) × 1A = 0.7854 in² The area of the punch is 0.7854 in².The area of the plate is equal to the area of the hole in the plate.

Area of the plate (A) = (π / 4) × d²where d = diameter of the hole in the plate.The diameter of the punch is 1 inch. Therefore, the diameter of the hole in the plate will also be 1 inch.The area of the plate is given by:A = (π / 4) × (1)²A = 0.7854 in²

The area of the plate is 0.7854 in².Substituting the values of force and area in the formula for shear stress, we get:Shear stress (τ) = Force (F) / Area (A)τ = 60,000 lb / 0.7854 in²τ = 76,394 psi  

Know more about Shear stress here:

https://brainly.com/question/20630976

#SPJ11