The purest way to do un inverse square law experiment would Be to take sound intensiry level measurements in an anechoic chamber where mom reflections wont talloet die rosults. Suppose you stand 3 incluss Gor a speaker playing a sound und my dB
meter reads 62 dis. ( (5) What is the intensity of this sound in Wit?
(10) Find the intensity and dB level at a distance of 1 m from the same speaker.

The squash lands approximately 17.446 meters from the base of the cliff.

To solve this problem, we can break down the motion of the squash into horizontal and vertical components. Let's start with the vertical motion.

The squash is launched with an initial velocity of 6.1 m/s at an angle of 55° with the horizontal. The vertical component of the initial velocity can be calculated as V₀y = V₀ * sin(θ), where V₀ is the initial velocity and θ is the launch angle.

V₀y = 6.1 m/s * sin(55°) ≈ 4.97 m/s

The time it takes for the squash to land is given as 5.50 seconds. Considering only the vertical motion, we can use the equation for vertical displacement:

Δy = V₀y * t + (1/2) * g * t²

Where Δy is the vertical displacement, t is the time, and g is the acceleration due to gravity (approximately 9.8 m/s²).

Substituting the known values, we have:

0 = 4.97 m/s * 5.50 s + (1/2) * 9.8 m/s² * (5.50 s)²

Simplifying the equation, we find:

0 = 27.3 m + 150.705 m

To solve for the vertical displacement (Δy), we have:

Δy = -177.005 m

Since the squash is launched from cliff-height level, the height of the cliff is the absolute value of the vertical displacement:

Height of the cliff = |Δy| = 177.005 m

Now let's calculate the horizontal distance traveled by the squash.

The horizontal component of the initial velocity can be calculated as V₀x = V₀ * cos(θ), where V₀ is the initial velocity and θ is the launch angle.

V₀x = 6.1 m/s * cos(55°) ≈ 3.172 m/s

The horizontal distance traveled (range) can be calculated using the equation:

Range = V₀x * t

Substituting the known values, we have:

Range = 3.172 m/s * 5.50 s ≈ 17.446 m

Therefore, The squash lands approximately 17.446 meters from the base of the cliff.

Learn more about squash here:

https://brainly.com/question/31127943

#SPJ11

The energy transferred as heat in this scenario is 300 J, and it is coming out of the system. This is determined by applying the First Law of Thermodynamics and considering the decrease in the system's thermal energy of 200 J and the work done on the system of 500 J.

To determine the energy transferred as heat in this scenario, we can use the First Law of Thermodynamics, which states that the change in internal energy of a system (ΔU) is equal to the heat added to the system (Q) minus the work done by the system (W).

ΔU = Q - W

In this case, the work done on the system is 500 J, and the decrease in the system's thermal energy is 200 J. Let's denote the energy transferred as heat as Q and set up the equation:

ΔU = Q - W

Since the thermal energy of the system decreases, the change in internal energy (ΔU) is equal to -200 J.

-200 J = Q - 500 J

To solve for Q, we rearrange the equation:

Q = ΔU + W

Q = -200 J + 500 J

Q = 300 J

The energy transferred as heat is 300 J. Since the thermal energy of the system decreases, the heat is coming out of the system.

To know more about the First Law of Thermodynamics refer here,

https://brainly.com/question/32101564#

#SPJ11

A thermistor is used in a circuit to control a piece of equipment automatically, this circuit be used for D. Turn on an air conditioner when the temperature rises.

A thermistor is a type of resistor whose resistance value varies with temperature. In a circuit, it is used as a sensor to detect temperature changes. The thermistor is used to control a piece of equipment automatically in various applications like thermostats, heating, and cooling systems. A circuit with a thermistor may be used to turn on an air conditioner when the temperature rises. In this case, the thermistor is used to sense the increase in temperature, which causes the resistance of the thermistor to decrease.

This change in resistance is then used to trigger the circuit, which turns on the air conditioner to cool the room. A thermistor circuit may also be used to switch on a water heater at a pre-determined time. In this case, the thermistor is used to detect the temperature of the water, and the circuit is programmed to turn on the heater when the water temperature falls below a certain level. This helps to maintain a consistent temperature in the water tank. So therefore the correct answer is D, turn on an air conditioner when the temperature rises.

Learn more about thermistor at:

https://brainly.com/question/31888503

#SPJ11

The inclined push making a 45° angle with the horizontal should satisfy the equation: Horizontal component = inclined push × cos(45°) ≥ Frictional force

To determine the horizontal push required to make the block move, we need to consider the force of friction acting on the block. The force of friction can be calculated using the formula:

Frictional force = coefficient of friction × normal force

The normal force is equal to the weight of the block, which is 180 lbs. Therefore, the normal force is 180 lbs × acceleration due to gravity.

To find the horizontal push, we need to overcome the force of friction. The force of friction is given by the equation:

Frictional force = coefficient of friction × normal force

Let's calculate the force of friction:

Frictional force = 0.42 × (180 lbs × acceleration due to gravity)

Now we can calculate the horizontal push:

Horizontal push = Frictional force

To Know the inclined push making a 45° angle with the horizontal, we need to consider the force components acting on the block. The horizontal component of the inclined push will contribute to overcoming the force of friction, while the vertical component will assist in counteracting the weight of the block.

Since the inclined push makes a 45° angle with the horizontal, the horizontal component can be calculated using the formula:

Horizontal component = inclined push × cos(45°)

To make the block move, the horizontal component of the inclined push should be equal to or greater than the force of friction calculated previously.

Therefore, the inclined push making a 45° angle with the horizontal should satisfy the equation:

Horizontal component = inclined push × cos(45°) ≥ Frictional force

Learn more about Frictional force from the link

https://brainly.com/question/24386803

#SPJ11

The period of oscillation is `0.796 n` and the frequency of the motion`1.26 Hz`.

Given that the position of an object connected to a spring varies with time according to the expression `x = (4.7 cm) sin(7.9nt)`.

Period of this motion

The general expression for the displacement of an object performing simple harmonic motion is given by:

x = A sin(ωt + φ)Where,

A = amplitude

ω = angular velocity

t = timeφ = phase constant

Comparing the given equation with the general expression we get,

A = 4.7 cm,

ω = 7.9 n

Thus, the period of oscillation

T = 2π/ω`= 2π/7.9n = 0.796 n`...(1)

Thus, the period of oscillation is `0.796 n`.

Frequency of the motion The frequency of oscillation is given as

f = 1/T

Thus, substituting the value of T in the above equation we get,

f = 1/0.796 n`= 1.26 n^-1 = 1.26 Hz`...(2)

Thus, the frequency of the motion is `1.26 Hz`.

Amplitude of the motion

The amplitude of oscillation is given as

A = 4.7 cm

Thus, the amplitude of oscillation is `4.7 cm`.

First time after

t = 0 that the object reaches the position

x = 2.6 cm.

The displacement equation of the object is given by

x = A sin(ωt + φ)

Comparing this with the given equation we get,

4.7 = A,

7.9n = ω

Thus, the equation of displacement becomes,

x = 4.7 sin (7.9nt)

Now, we need to find the time t when the object reaches a position of `2.6 cm`.

Thus, substituting this value in the above equation we get,

`2.6 = 4.7 sin (7.9nt)`Or,

`sin(7.9nt) = 2.6/4.7`

Solving this we get,

`7.9nt = sin^-1 (2.6/4.7)``7.9n

t = 0.6841`Or,

`t = 0.0867/n`

Thus, the first time after t=0 that the object reaches the position x=2.6 cm is `0.0867/n`

To know more about displacement visit :

brainly.com/question/11934397

#SPJ11

a) The mirror should be concave. b) Since the model is placed 2.50 m from the mirror, we have: [tex]d_{o}[/tex] = -2.50 m (negative sign indicates that the object is located on the same side as the incident light)

b) The image distance can be determined using the mirror formula, which is given by 1/f = 1/do + 1/di, where f is the focal length, do is the object distance, and di is the image distance. Since the mirror is concave, the focal length is positive.

Given that the object distance (do) is 2.50 m, we need to find the image distance (di). Plugging the values into the mirror formula, we have 1/f = 1/2.50 + 1/di. Since we are not provided with the focal length, we cannot directly solve for the image distance without additional information about the mirror.

Learn more about mirror formula here:

brainly.com/question/30242207

#SPJ11

An LC circuit, also known as a resonant circuit or a tank circuit, is a circuit in which the inductor (L) and capacitor (C) are connected together in a manner that allows energy to oscillate between the two.

When an LC circuit has a maximum energy in the capacitor at time

t = 0,

the energy then flows into the inductor and back into the capacitor, thus forming an oscillation.

The energy oscillates back and forth between the inductor and the capacitor.

The oscillation frequency, f, of the LC circuit can be calculated as follows:

$$f = \frac {1} {2\pi \sqrt {LC}} $$

The period, T, of the oscillation can be calculated by taking the inverse of the frequency:

$$T = \frac{1}{f} = 2\pi \sqrt {LC}$$

The maximum energy in the capacitor is reached at the end of each oscillation period.

Since the period of oscillation is

T = 2π√LC,

the end of an oscillation period occurs when.

t = T.

the minimum time t to maximize the energy in the capacitor can be expressed as follows:

$$t = T = 2\pi \sqrt {LC}$$

To know more about resonant visit:

https://brainly.com/question/32273580

#SPJ11

The image is real. The focal length of the lens is 8 cm. Image magnification (m) is 2.The image is inverted and real.

An object 4.5 cm high is placed 50 cm in front of a convex mirror with a radius of curvature of 20 cm. What is the height of the image Describe the image.Image height

= -2.25 cm The image is inverted, diminished and real.2. An object is placed 12 cm from a converging lens and the image appears at 24 cm on the opposite side of the lens. Is this a real or virtual image, What is the focal length of the lens .How many times is the image magnified Describe the image.The image is real. The focal length of the lens is 8 cm. Image magnification (m) is 2.The image is inverted and real.

To know more about focal length visit:

https://brainly.com/question/2194024

#SPJ11

According to the displacement method, Archimedes measured the volume of the king’s crown to determine whether or not it was made of pure gold.

To prove that it is made of pure gold, Archimedes had to use olive oil that weighs more than 100 oz. Thus, let us determine how much olive oil Archimedes would need to use: Mass of the crown in air = 14 oz Density of gold (Au) = 19.3 g/cm³Density of olive oil (ρ) = 0.8 g/cm³As the crown’s weight in air is given in ounces, we will convert its weight into grams:1 [tex]oz = 28.35 grams14 oz = 14 × 28.35 g = 396.9 g[/tex]The weight of the crown in olive oil (W’) can be calculated using the following formula: W’ = W × (ρ/ρ1)

where W is the weight of the crown in air, ρ is the density of olive oil, and ρ1 is the density of air. Density of air is approximately 1.2 g/cm³; therefore: [tex]W’ = 396.9 g × (0.8 g/cm³ / 1.2 g/cm³) = 264.6 g[/tex] Thus, the crown would weigh 264.6 grams in olive oil. As 1 oz = 28.35 g, the weight of the crown in olive oil is approximately 9.35 oz (to the nearest hundredth).Therefore, Archimedes would have needed to use more than 100 ounces of olive oil to prove that the crown was made of pure gold.

To know more about crown visit:

https://brainly.com/question/29023422

#SPJ11

A concave mirror, also known as a converging mirror or a concave spherical mirror, is a mirror with a curved reflective surface that bulges inward. The object must be placed at a distance of 38.6 cm from the concave mirror.

To determine the distance at which an object must be placed from a concave mirror in order for its image to be at infinity, we can use the mirror formula:

1/f = 1/v - 1/u

Where:

f is the focal length of the mirror

v is the image distance (positive for real images, negative for virtual images)

u is the object distance (positive for objects on the same side as the incident light, negative for objects on the opposite side)

In this case, since the image is at infinity, the image distance (v) is infinite. Therefore, we can simplify the mirror formula as follows:

1/f = 0 - 1/u

Simplifying further, we have:

1/f = -1/u

Since the mirror is concave, the focal length (f) is negative. Therefore, we can rewrite the equation as:

-1/f = -1/u

By comparing this equation with the general form of a linear equation (y = mx), we can see that the slope (m) is -1 and the intercept (y-intercept) is -1/f.

Therefore, the object distance (u) should be equal to the focal length (f) for the image to be at infinity.

Given that the radius of the concave mirror is 38.6 cm, the focal length (f) is half of the radius:

f = 38.6 cm / 2 = 19.3 cm

Therefore, the object must be placed at a distance of 19.3 cm (or approximately 38.6 cm) from the concave mirror for its image to be at infinity.

To achieve an image at infinity with a concave mirror (radius 38.6 cm), the object must be placed at a distance of approximately 38.6 cm from the mirror.

To know more about concave mirror, visit;
https://brainly.com/question/30155662
#SPJ11

The mass of the rocket is 2.35 x 10^6 kg. The mass of the exhaust gas expelled in 1 second is 3.55 x 10^3 kg.

The initial velocity of the rocket is 0 m/s. The final velocity of the rocket after 1 second of lift off is 5.7 m/s. At what velocity is the exhaust gas leaving the rocket engines? We can calculate the velocity at which the exhaust gas is leaving the rocket engines using the formula of the conservation of momentum.

The equation is given as:m1u1 + m2u2 = m1v1 + m2v2Where m1 and m2 are the masses of the rocket and exhaust gas, respectively;u1 and u2 are the initial velocities of the rocket and exhaust gas, respectively;v1 and v2 are the final velocities of the rocket and exhaust gas, respectively.

Multiplying the mass of the rocket by its initial velocity and adding it to the mass of the exhaust gas multiplied by its initial velocity, we have:m1u1 + m2u2 = 2.35 x 10^6 x 0 + 3.55 x 10^3 x u2 = m1v1 + m2v2Next, we calculate the final velocity of the rocket.

To know more about rocket visit:

https://brainly.com/question/32772748

#SPJ11

The work done on the horizontally carried infinity stone by the donkey is zero. The work done by the 97 N force is 591.4 J. distance traveled is 48.17 meters. the distance between the vehicle and the tractor is approximately 91.83 meters.

The work done on the infinity stone by the donkey is zero, as the stone is carried horizontally at a constant velocity.

The work done by the 97 N force on the 3.00 kg box is calculated as the product of the force, the displacement, and the cosine of the angle between them, resulting in approximately 591.4 J of work done.

To determine the height the object reaches on the frictionless ramp, we need additional information, such as the angle of the ramp or the potential energy of the compressed spring.

The time it will take to stop the vehicle can be found using the equation Δv = at, where Δv is the change in velocity, a is the deceleration, and t is the time. Solving for t gives a time of approximately 3.14 seconds.

The distance traveled during the deceleration can be calculated using the equation d = v₀t + (1/2)at², where v₀ is the initial velocity, a is the deceleration, t is the time, and d is the distance. Plugging in the values, the distance traveled is approximately 48.17 meters.

To find the distance between the vehicle and the tractor when it comes to a stop, we need to subtract the distance traveled during deceleration from the initial distance between them. The distance is approximately 91.83 meters.

The change in velocity can be calculated as the final velocity (0 m/s) minus the initial velocity (5 m/s). Plugging in the values, the acceleration of the stone is approximately -0.208 m/s^2. The negative sign indicates that the stone is decelerating or slowing down.

Learn more about work done at: https://brainly.com/question/28356414

#SPJ11

The thermal conductivity of the material is approximately 36.32 J/(m·s·K).

To calculate the thermal conductivity of the material, we can use the formula:

Q = k × A × ΔT / L

where: Q is the heat transfer rate (in watts),

k is the thermal conductivity (in watts per meter per kelvin),

A is the surface area of the slab (in square meters),

ΔT is the temperature difference across the slab (in kelvin),

L is the thickness of the slab (in meters).

Converting the given values:

Q = 3967.2 J/s (since 1 watt = 1 joule/second)

A = 29 cm² = 0.0029 m²

ΔT = (28°C - 10°C) = 18 K

L = 5 mm = 0.005 m

Substituting these values into the formula, we can solve for k:

3967.2 = k × 0.0029 × 18 / 0.005

k = (3967.2 × 0.005) / (0.0029 × 18)

k ≈ 34.67 W/m·K

Therefore, the thermal conductivity of the material is approximately 34.67 W/m·K.

Read more on Thermal conductivity here: https://brainly.com/question/11213835

#SPJ11

To determine the required coefficient of static friction for a car not to skid on a curve with a radius of 95 m when traveling at 85 km/h, we first need to calculate the banking angle of the curve.

Using the formula for the banking angle, we find that the angle is approximately 34 degrees. Next, we can calculate the critical speed at which the car would start to skid on the curve, using the formula for critical speed.

The critical speed is found to be approximately 77 km/h. Since the given speed of 85 km/h is greater than the critical speed, the coefficient of static friction required for the car not to skid is not applicable in this case.

To determine the banking angle of the curve, we can use the formula:

tan(θ) = [tex]v^2 / (g * r)[/tex],

where θ is the banking angle, v is the speed of the car, g is the acceleration due to gravity (approximately 9.8 m/s^2), and r is the radius of the curve. Plugging in the given values, we have:

tan(θ) = (67 km/h)^2 / (9.8 m/s^2 * 95 m).

Simplifying and solving for θ, we find θ ≈ 34 degrees.

Next, we can calculate the critical speed at which the car would start to skid on the curve. The critical speed can be determined using the formula:

v_critical = [tex]√(μ * g * r),[/tex]

where μ is the coefficient of static friction. Plugging in the given values, we have:

v_critical = [tex]√(μ * 9.8 m/s^2 * 95 m).[/tex]

Simplifying and solving for v_critical, we find v_critical ≈ 77 km/h.

Since the given speed of 85 km/h is greater than the critical speed of 77 km/h, the car will start to skid regardless of the coefficient of static friction. Therefore, the coefficient of static friction is not applicable in this case.

To learn more about, coefficient:-

brainly.com/question/18095354

#SPJ11

Permanent magnets have a magnetic field and exhibit magnetization. The magnetization is a result of the alignment of magnetic domains within the material. In these domains, atomic or molecular magnetic moments align in the same direction, creating a macroscopic magnetic field.

1. Electrons are much lighter than protons. Electrons are negatively charged subatomic particles that orbit the nucleus of an atom. They are much lighter than protons and have a charge that is equal in magnitude but opposite in sign to that of protons. Electrons were discovered in 1897 by J.J. Thomson.

2. A permanent magnet and a magnetizable material like steel can attract or repel. Permanent magnets are objects that produce a magnetic field and have the ability to attract ferromagnetic materials like iron, cobalt, and nickel. A magnetizable material like steel can become magnetized when placed in a magnetic field and can attract or repel other magnets depending on the orientation of the poles.

3. An astronaut in deep space, far from any planet or star, has neither mass nor weight. An astronaut in deep space, far from any planet or star, has neither mass nor weight because weight is the force of gravity acting on an object, and there is no gravity in deep space. Mass, on the other hand, is an intrinsic property of matter and does not depend on gravity.

4. The center of mass of an object is the point around which the object will rotate if it is free of outside torques. The center of mass of an object is the point at which all the mass of an object can be considered to be concentrated. It is the point around which the object will rotate if it is free of outside torques. It is not necessarily the exact center of the object, but it is the balance point of the object.

To learn more about permanent magnets visit:

https://brainly.com/question/11411587

#SPJ11

The monthly mass emission rate to the atmosphere in kg/month is 0.2786 kg since the mass emitted into the atmosphere is 0.2786 kg. Option 1.

Given: Volume of fluid purchased in a month = 0.190 m³

Density of fluid = 1.5940 g/mL

Mass of fluid purchased = volume x density= 0.190 m³ x 1.5940 g/m³= 0.3029 kg

Airborne emissions rate = 92% of the mass of fluid purchased

Residue disposal rate = 8% of the mass of fluid purchased

So, the mass emitted into the atmosphere = 92% x 0.3029 kg= 0.2786 kg

The monthly mass emission rate to the atmosphere in kg/month is approximately 0.2786 kg/month. Hence, option 1: 278.63 kg/month is the correct answer.

Here are the details of the solution:

M = 0.190 m³ x 1.5940 g/mL = 0.3029 kg

So, the mass of fluid purchased in a month is 0.3029 kg.

Airborne emissions rate = 92% of the mass of fluid purchased= 0.92 x 0.3029 kg= 0.2786 kg

The mass of the fluid that remains as residue to be disposed of is 8% of the mass of fluid purchased.= 0.08 x 0.3029 kg= 0.0243 kg

So, the monthly mass emission rate to the atmosphere in kg/month is 0.2786 kg. Option 1.

More on emission rate: https://brainly.com/question/24021466

#SPJ11

1.6 × 10⁻¹⁹ J and the is provided below:We are given the wavelength of laser as `766 nm`We can determine the energy of the photon using the formula `E = hν = hc/λ`, where E is the energy of photon, h is Planck’s constant, c is the speed of light, ν is the frequency of the photon and λ is the wavelength of the photon.`

E = hc/λ`... Equation 1where c = `3.0 × 10⁸ m/s` = speed of lighth = `6.626 × 10⁻³⁴ J s` = Planck's constantSubstituting the values of `c`, `h`, and λ in Equation 1, we get:`E = (6.626 × 10⁻³⁴ J s) × (3.0 × 10⁸ m/s) / (766 × 10⁻⁹ m)`On solving this equation, we get:E = `2.590 × 10⁻¹⁹ J`The energy difference between the two lasing energy levels is equal to the energy of the photon.

Thus, the energy difference between the two lasing energy levels is equal to `2.590 × 10⁻¹⁹ J`The energy of a photon can be expressed in electron volts (eV). One electron volt is equal to the energy gained by an electron when it moves through a potential difference of 1 volt.`1 eV = 1.6 × 10⁻¹⁹ J`Therefore, the energy of the photon in electron volts (eV) is:`E = (2.590 × 10⁻¹⁹ J) / (1.6 × 10⁻¹⁹ J/eV)`On solving this equation, we get:E = `1.619 eV`Thus, the energy of the photon is `1.619 eV`. Hence, the difference in eV between the two lasing energy levels is `1.619 eV`

TO know more about that wavelength visit:

https://brainly.com/question/31143857

#SPJ11

The percentage of the original charge left on the capacitor after 1.7 seconds of discharging is approximately 20.6%.

Given that the 5.5 μF capacitor is connected in series with a 1.7×10^5 Ω resistor and it is fully charged. We are to find the percentage of the original charge left on the capacitor after 1.7 seconds of discharging.

First we need to find the time constant, τ of the circuit.Tau (τ) = RC

where, R = 1.7 × 10^5 Ω, C = 5.5 × 10^-6 F.

∴ τ = RC = 1.7 × 10^5 Ω × 5.5 × 10^-6 F = 0.935 s.

After 1.7 seconds, the number of time constants, t/τ = 1.7 s/0.935 s = 1.815.

The charge remaining on the capacitor after 1.7 seconds is given by :

Q = Q0e^(-t/τ) = Q0e^(-1.815)

The percentage of the original charge left on the capacitor = Q/Q0 × 100%

Substituting the values :

Percentage of the original charge left on the capacitor = 20.6% (approx)

Therefore, the percentage of the original charge left is 20.6%.

To learn more about capacitor :

https://brainly.com/question/30529897

#SPJ11

Answer: While measuring voltage change and current across a resistor in a circuit, a physics student should connect the voltmeter in parallel to the resistor, and the ammeter in series with the resistor.

The number of turns in a conducting, multi-turn circular loop of radius 12.0 cm that carries a current of 15.0 A and has a magnetic field strength of 0.0250 T at the center of the loop can be calculated using the formula:N = B_0A/i,where N is the number of turns, B_0 is the magnetic field strength, A is the area of the loop and i is the current flowing through the loop.

Area of the circular loop, [tex]A = πr² = π(0.12 m)² = 0.045 m[/tex]

The moles of helium gas that initially occupies a volume of 30 L at a temperature of 280 K and isothermally expands to 40 L can be calculated using the ideal gas law formula, PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant and T is the temperature.

Rearranging the formula to get the number of moles of gas:[tex]n = PV/RT[/tex]

The work done by the gas can be calculated using the formula, [tex]W = nRT ln(V_f/V_i), where V_f[/tex] is the final volume and V_i is the initial volume.

The work done is given by:[tex]W = 3.0 mol x (8.314 J/mol K) x 280 K ln(40/30)W = 2.01 kJ = 2.01/4.18 = 0.481 kcal[/tex]

Therefore, the work done by the gas on its environment is 0.481 kcal.

To know more about initial visit :

https://brainly.com/question/32209767

#SPJ11

The mass of the 12 cm^3 tank of fresh water is 12 grams.

To calculate the mass of the fresh water in the tank, we can use the formula:

Mass = Volume * Density

According to the question:

Volume of the tank (V) = 12 cm^3

Density of water (ρ) = 1.00 g/cm^3

Substituting the values into the formula, we have:

Mass = Volume * Density

Mass = 12 cm^3 * 1.00 g/cm^3

To solve this equation, we need to make sure the units cancel out appropriately. By multiplying the volume (cm³) by the density (g/cm³), the cm³ unit cancels out, leaving us with the unit of mass (grams):

Calculating the product, we get:

Mass = 12 g

Therefore, the mass of the 12 cm^3 tank of fresh water is 12 grams.

Learn more about mass https://brainly.com/question/86444

#SPJ11

The average force that acts on the ball is 3.8 N.

The average force on the ball is calculated by applying Newton's second law of motion as follows;

F = m(v - u ) / t

where;

The average force on the ball is calculated as;

F = 0.057 (25 - 21 ) / 0.06

F = 3.8 N

Thus, the average force that acts on the ball is calculated from Newton's second law of motion.

Learn more about average force here: https://brainly.com/question/18652903

#SPJ4

a) Index of refraction of the liquid is 1.47.

b) The refracted ray in the air makes an angle of 24.03° with the normal.

c) The refracted ray in the liquid makes an angle of 19.41° with the normal.

Critical angle = 44.3°, Nair = 1.00 (refractive index of air), Angle of incidence = 34.7°

Let Nliquid be the refractive index of the liquid.

A)Formula for critical angle is :Angle of incidence for the critical angle:

When the angle of incidence is equal to the critical angle, the refracted ray makes an angle of 90° with the normal at the interface. As per the above observation and formula, we have:

44.3° = sin⁻¹(Nair/Nliquid)

⇒ Nliquid = Nair / sin 44.3° = 1.00 / sin 44.3° = 1.47

B) As per Snell's law, the angle of refracted ray in air is 24.03°.

C) As per Snell's law, the angle of refracted ray in the liquid is 19.41°.

Therefore, the answers are:

a) Index of refraction of the liquid is 1.47.

b) The refracted ray in the air makes an angle of 24.03° with the normal.

c) The refracted ray in the liquid makes an angle of 19.41° with the normal.

Learn more about refractive index https://brainly.com/question/83184

#SPJ11

The current required to generate a magnetic field of 12.0 T in a superconducting solenoid with 2000 turns/m is approximately 6.0 kA.

To calculate the current, we can use Ampere's Law, which states that the magnetic field (B) inside a solenoid is directly proportional to the product of the current (I) and the number of turns per unit length (N).

B = μ₀ * N * I

where μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A).

Rearranging the equation to solve for current (I):

I = B / (μ₀ * N)

Plugging in the given values:

I = 12.0 T / (4π × 10⁻⁷ T·m/A * 2000 turns/m)

I ≈ 6.0 kA

learn more about Ampere's Law, here:

https://brainly.com/question/32676356

#SPJ11

It is not clear how many decimal places were used to measure the mass of each square of aluminum as the question doesn't provide that information.

Additionally, it's not possible to determine which places were exact and which were estimated without knowing the measurement itself. Decimal places refer to the number of digits to the right of the decimal point when measuring a quantity. The precision of a measurement is determined by the number of decimal places used. For example, if a measurement is recorded to the nearest hundredth, it has two decimal places. If a measurement is recorded to the nearest thousandth, it has three decimal places.

Exact numbers are numbers that are known with complete accuracy. They are often defined quantities, such as the number of inches in a foot or the number of seconds in a minute. When using a measuring device, the last digit of the measurement is usually an estimate, as there is some uncertainty associated with the measurement. Therefore, it is important to record which digits are exact and which are estimated when reporting a measurement.

To know more about aluminum visit:

https://brainly.com/question/28989771

#SPJ11

To calculate the entropy change of the system (ASsys) and the total entropy change of the universe (ASuniv) for the melting of the ice cube, we need to consider the heat transfer and the change in entropy.

First, let's calculate the heat transfer during the melting process. The heat transferred is given by the product of the mass of the ice cube, the molar heat of fusion of water, and the molar mass of water. The molar mass of water is approximately 18 g/mol.

Next, we can calculate ASsys using the equation ASsys = q / T, where q is the heat transferred and T is the temperature in Kelvin.

To calculate ASuniv, we can use the equation ASuniv = ASsys + ASsurr, where ASsurr is the entropy change of the surroundings. Since the process is happening at constant pressure and temperature, ASsurr is equal to q / T.

By substituting the calculated values into the equations, we can find the values of ASsys and ASuniv for the melting of the ice cube. The units for entropy change are liter-atmosphere per Kelvin.

To know more about entropy refer here:

https://brainly.com/question/20166134#

#SPJ11

There is a lower limit to what can actually be seen with visible light visible light waves are smaller than the smallest objects in existence (option b).

The lower limit of visible light is due to the wavelength of the light. This is the primary explanation. There are some things that are too small to be seen using visible light since the wavelength of the light is smaller than the objects' size.  The best option among the given alternatives that explains why there is a lower limit to what can actually be seen with visible light is b) Visible light waves are smaller than the smallest objects in existence.

To know more about visible:

https://brainly.com/question/15093941

#SPJ11

Cosmic rays are very high-energy particles that originate from outside the solar system and hit the Earth's atmosphere. They include cosmic ray muons, which are extremely energetic and able to penetrate deeply into materials.

They decay rapidly, with a half-life of just a few microseconds, but this is still long enough for them to travel significant distances at close to the speed of light.  If the speed of a cosmic ray muon is 29.8 cm/ns, we can convert this to kilometers per second by dividing by 100,000 (since there are 100,000 cm in a kilometer) as follows:

Speed = 29.8 cm/ns = 0.298 km/s

Using this velocity and the lifetime of the cosmic ray muon, we can calculate the distance it will travel using the formula distance = velocity x time:

Distance = 0.298 km/s x 3.228 ms = 0.000964 km = 0.964 m

t will travel a distance of approximately 0.964 meters or 96.4 centimeters if its lifetime is 3.228 ms.

Therefore, we can use a constant velocity model to estimate how far a cosmic ray muon will travel if its lifetime is known.

To know more about energetic visit:

https://brainly.com/question/31965710

#SPJ11

The change in entropy of 2.50 m³ of water at 0°C when it is frozen to ice at 0°C is zero.

1. Entropy is a thermodynamic property that measures the degree of disorder or randomness in a system.

2. When water freezes to ice at 0°C, it undergoes a phase transition from a liquid state to a solid state.

3. During this phase transition, the arrangement of water molecules changes from a more disordered state (liquid) to a more ordered state (solid).

4. In general, the entropy of a substance decreases when it undergoes a phase transition from a higher entropy state to a lower entropy state.

5. However, at the freezing point of a substance, such as water at 0°C, the change in entropy is zero.

6. This is because the entropy change during the phase transition from liquid water to solid ice at 0°C is exactly offset by the decrease in entropy associated with the formation of the ordered ice crystal structure.

7. Therefore, the change in entropy of 2.50 m³ of water at 0°C when it is frozen to ice at 0°C is zero.

To know more about entropy click here:

https://brainly.com/question/20166134

#SPJ11

The mass of the fish hanging from the spring scale is approximately 8.07 kg.

To calculate the mass of the fish, we need to use the relationship between the frequency of oscillation, the spring constant, and the mass.

The angular frequency (ω) of the oscillation can be calculated using the formula:

ω = 2πf,

where:

Given:

Let's substitute the given value into the formula to find ω:

ω = 2π * 2.10 Hz ≈ 4.19π rad/s.

Now, we can use Hooke's law to relate the angular frequency (ω) and the spring constant (k) to the mass (me) of the fish:

ω = √(k / me),

where:

We can rearrange the equation to solve for me:

me = k / ω².

Given:

The spring constant (k) can be calculated using Hooke's law:

k = F / x,

where:

Let's substitute the values into the equation to find k:

k = 235 N / 0.115 m ≈ 2043.48 N/m.

Now we can substitute the values of k and ω into the equation for me:

me = (2043.48 N/m) / (4.19π rad/s)².

Calculating this expression will give us the mass of the fish (me).

me ≈ 8.07 kg.

Therefore, the mass of the fish is approximately 8.07 kg.

To learn more about Hooke's law, Visit:

https://brainly.com/question/17068281

#SPJ11

The speed of light in this material is approximately 2.04 x 10^8 meters per second. The formula that can be used to calculate the speed of light in a material is v = c/n.

The speed of light in vacuum is denoted by c, which has a constant value of approximately 3 x 10^8 meters per second. The index of refraction of a material is represented by n. To calculate the speed of light in the material, we divide the speed of light in vacuum (c) by the index of refraction (n).

Using the given values, we can substitute them into the formula:

v = c/n

= (3 x 10^8) / 1.47

≈ 2.04 x 10^8 meters per second

Therefore, the speed of light in this material is approximately 2.04 x 10^8 meters per second.

To learn more about refraction , click here :  https://brainly.com/question/14760207

#SPJ11