Therefore, the amount of antimony in the sample is 0.00208 mol and the percentage of antimony in the ore is about 4.61%.
The given reaction is:bro−3(aq)+sb3+(aq)⟶br−(aq)+sb5+(aq) (unbalanced).
In this oxidation-reduction reaction, antimony changes from +3 to +5, while bromine changes from +5 to -1 (reduction reaction).
From the given information: Volume of KBrO3 used = 24.0 mL = 0.0240 L ,Concentration of KBrO3 = 0.130 M.
Now, the balanced equation for the reaction is:
2Sb3+(aq) + 3BrO3–(aq) + 3H2O(l) → Sb2O5(s) + 3Br–(aq) + 6H+(aq), Let's determine the amount of Sb3+(aq) that reacted with KBrO3(aq).
Moles of KBrO3 = concentration × volume = 0.130 × 0.0240 = 0.00312 mol, From the balanced equation, 2 moles of Sb3+(aq) react with 3 moles of BrO3-(aq).
Hence, moles of Sb3+(aq) that reacted with KBrO3(aq) = 2/3 × 0.00312 = 0.00208 mol So, the amount of antimony in the sample is 0.00208 mol.
Now, let's determine the molar mass of antimony.
Molar mass of antimony (Sb) = 121.8 g/mol, Now, the mass of antimony in the sample is:
mass = moles × molar mass = 0.00208 × 121.8 = 0.253 g.
The percentage of antimony in the ore is:
percentage of antimony = mass of antimony in the ore / mass of the sample × 100%= 0.253 g / 5.49 g × 100%≈ 4.61%
To know more about oxidation-reduction visit;
https://brainly.com/question/13182308
#SPJ11
true or false: in polar covalent bonds the shared electrons spend more time around the larger atom making that are slightly negative
In a polar covalent bonds the shared electrons spend more time around the one atom than the other. Hence the statement is true.
In a polar covalent bond, the electrons are unequally distributed among the atoms and spend more time close to one atom than the other. Different regions of the molecule gain slightly positive (+) and slightly negative (-) charges as a result of the unequal distribution of electrons among the atoms of various components.
The electrons that the atoms share in a polar covalent connection spend more time near one nucleus than the other. The shared electrons of the atoms form a polar covalent link when they spend, on average, more time closer to one nucleus than the other nucleus.
To know about polar covalent bond
https://brainly.com/question/20294573
#SPJ4
For the following reaction K=30.0 2 A(aq)−>B(aq)+C(aq) The initial concentration of A is 2.4M (with no B or C ). What is the equilibrium concentration of B in M ?
The equilibrium concentration of B is 0.589 M.
The reaction considered is 2 A(aq) → B(aq) + C(aq) with K = 30.0 and an initial concentration of A being 2.4M (no B or C).
The equilibrium concentration of B in M can be calculated as follows:Let the initial concentration of A be [A]₀.
The concentration of A at equilibrium would be [A]₀ - 2x M, where x is the concentration of A that reacted to give B and C.
The concentrations of B and C would be x M, as both are produced in a 1:1 molar ratio with respect to A. Using the equilibrium constant expression:K = [B][C]/[A]²
Substituting the above expressions for
[B], [C], and [A]:K
= (x)(x)/([A]₀ - 2x)²K
= x²/([A]₀ - 2x)²Since K
= 30.0 and [A]₀ = 2.4 M:30.0
= x²/(2.4 - 2x)²
Expanding the denominator and solving for x using the quadratic formula, we get:x = 0.589 MThe equilibrium concentration of B is thus:x = [B] = 0.589 M.
To know more about equilibrium concentration visit:-
https://brainly.com/question/16645766
#SPJ11
which alpha particles go straight through the gold foil and hit the zinc-sulfide screen? which bounce back toward the lead screen? (2
Some alpha particles go straight through the gold foil and hit the zinc-sulfide screen, while others bounce back toward the lead screen.
This scenario refers to the famous experiment conducted by Ernest Rutherford known as the gold foil experiment. In this experiment, Rutherford bombarded a thin gold foil with alpha particles (helium nuclei).
Most of the alpha particles passed straight through the gold foil and hit the zinc-sulfide screen positioned behind it. These particles traveled through the mostly empty space within the gold atom, encountering minimal resistance and thus continuing in a straight path.
However, a small fraction of the alpha particles experienced significant deflection and even bounced back toward the lead screen. This observation led Rutherford to propose that atoms have a dense, positively charged nucleus at their center and that most of the atom is empty space. The few alpha particles that bounced back indicated a strong repulsion when they came close to the positive nucleus.
learn more about gold foil experiment here:
https://brainly.com/question/25094208
#SPJ4
draw the structure of
1) 4 carbon branched carboxylic acid
2) 5 carbon di-alochol
The structure of the branched ether with chemical formula c4h10o is
[tex]CH_{3} -CH_{2} - CH_{2}-O-CH_{2} - CH_{2}-CH_{3}[/tex]
We have to draw the structure of branched ether. [tex]C_{4}H_{10}[/tex] is a branched ether which is also known as an alkoxy alkane or a glycol ether. It is an organic compound that is composed of four carbon atoms, ten hydrogen atoms, and one oxygen atom. Its molecular weight is 86.13 g/mol.
Its structure is linear, with a carbon backbone and an oxygen atom attached to two of the carbons in the chain. The oxygen atom is then connected to two methyl ([tex]CH_{3}[/tex]) groups, which are present on each side of the central carbon atom. The structure of the branched ether will look like this;
[tex]CH_{3} -CH_{2} - CH_{2}-O-CH_{2} - CH_{2}-CH_{3}[/tex].
To learn more about the structure of the ether;
brainly.com/question/20772030
#SPJ4
The complete question is "Draw the structure(s) of the branched ether(s) with the chemical formula c4h10o?"
indicate whether each of the following statements about the reactivity of elements is true or false.
Each of the statements about the reactivity of elements should be evaluated as follows;
The eight-element periodicity found in the Periodic Table is related to the number of electrons in the outermost energy level of the atoms that make up each element: true.Electrons in the first energy level of an atom are called valence electrons: false.For atoms important to life, if the first energy level is the outermost shell, it is stable with 2 electrons. If any other energy level is the outermost shell, it is stable with 8 electrons: true.Atoms tend to react in ways that give each atom a stable outer shell of electrons: true.Atoms with an outer shell that is almost empty are located on the right side of the Periodic Table while atoms with an outer shell that is full or almost full are located on the left side of the Periodic Table: false.Atoms in the same row of the Periodic Table tend to have the same number of valence electrons: falseAtoms with 7 valence electrons tend to be non-reactive: false.What is a chemical element?A chemical element is a pure substance that comprises atoms having the same atomic number (number of protons) in its nuclei and as such, it is the primary constituent of matter.
In Chemistry, valence electrons can be defined as the number of electrons that are present in the outermost shell of an atom of a specific chemical element.
Read more on valence electrons here: brainly.com/question/11403796
#SPJ4
Complete Question:
Indicate whether each of the following statements about the reactivity of elements is true or false
1. The eight-element periodicity found in the Periodic Table is related to the number of electrons in the outermost energy level of the atoms that make up each element.
2. Electrons in the first energy level of an atom are called valence electrons.
3. For atoms important to life, if the first energy level is the outermost shell, it is stable with 2 electrons. If any other energy level is the outermost shell, it is stable with 8 electrons.
4. Atoms tend to react in ways that give each atom a stable outer shell of electrons.
5. Atoms with an outer shell that is almost empty are located on the right side of the Periodic Table while atoms with an outer shell that is full or almost full are located on the left side of the Periodic Table.
6. Atoms in the same row of the Periodic Table tend to have the same number of valence electrons.
7. Atoms with 7 valence electrons tend to be non-reactive.
What is the name of the ionic compound of lihso4
Answer:
Lithium hydrogen sulfate
The density of pure silver is at. If g of pure silver pellets is added to a graduated cylinder containing ml of water, to what volume level will the water in the cylinder rise?.
The volume level at which the water level in the cylinder rises is: 16.6 mL
What is the Volume at which the Water level rises to?The parameters are given as:
Density = 10.5 g/cm³
Mass = 5.25 g
We calculate the volume occupied by silver as follows:
Volume= mass/density
Volume = (5.25 g)/(10.5 g/cm³)
Volume = 0.5 cm³
Moreover, we know that 1 cm³= 1 ml.
Thus, a mass of 5.25 g of pure silver occupies a volume of 0.5 ml.
If we add the mass of silver to a graduated cylinder with 16.1 mL of water, the final volume will be given by the initial volume of water plus the volume occupied by silver:
Volume level = 16.1 mL + 0.5 mL = 16.6 mL
Read more about rise in water level at: https://brainly.com/question/33175282
#SPJ4
A creatinine clearance is performed on a professional wrestler. The patient is 6 feet 6 inches and weighs 359lb. A 24 hour urine sample was obtained with a total volume of 2200 mL. The urine creatinine result is 150mg/dL and the serum creatinine result is 1.5mg/dL. What is the patient's corrected creatinine clearance? (2 pts) In a multiple dilution series, 20∪L of serum and 80∪L of dilvent are added and mixed in tube 1. From tube 1, 10 uL are taken and placed into a 40LL of diluent in tube 2 . What is the final dilution in tube 2 ? (2 pts) A serum sample is outside of the linear range of the analyzer for an analyte. A 1 to 3 ratio of serum to diluent is performed and the sample is reanalyzed. What "factor" would the technologist need to multiply the result of the diluted sample by to obtain the correct concentration of the analyte? ( 2 pts) Diagram the process of making a 1/1000 dilution of a sample by starting with a 1/10 dilution.
To make a 1/1000 dilution from a 1/10 dilution, you will need to add 1 mL of the 1/10 dilution to 9 mL of diluent twice.Creatinine clearance is a test that measures how effectively the kidneys are functioning in removing creatinine, which is a waste product produced by muscle metabolism.
It is calculated using the patient's serum creatinine levels, 24-hour urine volume, and the volume of urine creatinine. The patient in this scenario weighs 359lb and is 6'6" tall, resulting in a BMI of 43. The BMI suggests that the patient is obese. Based on the information given, the corrected creatinine clearance can be calculated as follows:
Creatinine clearance = (urine creatinine x urine volume)/(serum creatinine x time)
= (150mg/dL x 2200mL)/ (1.5mg/dL x 1440 min/day)
= 92.59 mL/min.
However, the corrected creatinine clearance must be adjusted for the patient's body surface area (BSA) since creatinine production is proportional to BSA.
BSA = 0.007184 x Height (cm)
0.725 x Weight (kg)
0.425= 0.007184 x 198.12 x 163.30
= 3.12 m
2. Corrected creatinine clearance = (92.59 mL/min) x (1.73m2/BSA)
= 158.45 mL/min.
A multiple dilution series is used to create a series of dilutions in which each dilution in the series is a constant multiple of the previous dilution. In this case, the 20 uL of serum is diluted 4 times by adding 80 uL of diluent to each tube.
As a result, the total dilution is 1/5 x 1/5 x 1/5 x 1/5 = 1/625.
Since the first dilution is 1/5, the final dilution in tube 2 is (1/5) x (1/40) = 1/200.
A 1:3 serum-to-diluent ratio means that for every 1 mL of serum, 3 mL of diluent is added. Since a 1:3 dilution is performed, the final volume is 1 part serum and 3 parts diluent, resulting in a dilution factor of 1 + 3 = 4. Therefore, the result of the diluted sample must be multiplied by 4 to obtain the correct concentration of the analyte.To create a 1/1000 dilution from a 1/10 dilution, follow these steps:
Take 1 mL of the 1/10 dilution and add it to 9 mL of diluent. This is a 1/10 dilution of the 1/10 dilution, which results in a 1/100 dilution.Add 1 mL of the 1/100 dilution to 9 mL of diluent to make a 1/1000 dilution.
Therefore, to make a 1/1000 dilution from a 1/10 dilution, you will need to add 1 mL of the 1/10 dilution to 9 mL of diluent twice.
To know more about Creatinine visit:
https://brainly.com/question/30764823
#SPJ11
a solution contains zn2 , hg2 , ag , nh4 , and ba2 . identify the precipitate after the addition of 6 m hcl, then h2s and 0.2 m hcl.
The precipitate formed after the addition of 6 M HCl, followed by H₂S and 0.2 M HCl, in the solution containing Zn²⁺, Hg₂²⁺, Ag⁺, NH₄⁺, and Ba²⁺ is AgCl.
When 6 M HCl is added to the solution, it will react with Ba²⁺ ions forming BaCl₂, which remains in solution. The other ions (Zn²⁺, Hg₂²⁺, Ag⁺, and NH₄⁺) do not form precipitates with HCl at this stage.
Next, when H₂S is added, it reacts with the remaining Zn²⁺, Hg₂²⁺, and Ag⁺ ions in the solution. Zn²⁺ and Hg₂²⁺ ions form insoluble sulfides, ZnS, and HgS, respectively, which are precipitates. However, Ag⁺ ions react with H₂S to form Ag₂S, another insoluble sulfide, resulting in the precipitation of Ag₂S.
Finally, when 0.2 M HCl is added, it does not affect the precipitates of ZnS, HgS, or Ag₂S. Therefore, the only precipitate remaining in the solution is AgCl, which is formed by the reaction between Ag⁺ ions and Cl⁻ ions from HCl.
In conclusion, the precipitate formed after the addition of 6 M HCl, followed by H₂S and 0.2 M HCl, in the given solution is AgCl.
learn more about precipitate here:
https://brainly.com/question/31609975
#SPJ4
In a liver cell at 37 c, the concentration of both phospate and glucose are nromally maintained at about 5 mm eac. what would be the equilibrium concentration of glucseo?
The equilibrium concentration of glucose in a liver cell depends on various metabolic processes and regulatory factors.
To decide the balance centralization of glucose in a liver cell, we really want extra data, for example, the particular metabolic cycles and transport components engaged with keeping up with glucose focus. The centralization of glucose in a phone is controlled by different elements, including glucose carriers, enzymatic responses, and cell flagging.
Nonetheless, assuming that we expect that glucose fixation in a liver cell is at balance, it would rely upon the metabolic state and the paces of glucose take-up, use, and creation. In a solid liver cell, glucose fixation is firmly managed through the equilibrium of glucose take-up, glycolysis, gluconeogenesis, and glycogen capacity.
The balance centralization of glucose would be affected by variables like hormonal guidelines (insulin and glucagon), metabolic interest, and substrate accessibility. These elements can move the balance by adjusting the paces of glucose transport, glycolysis, and gluconeogenesis.
Consequently, without explicit data about the metabolic state and administrative variables, deciding the specific harmony convergence of glucose in a liver cell is troublesome.
Learn more about the equilibrium concentration of glucose in a liver cell at:
https://brainly.com/question/30418763
#SPJ4
How much 5m koh must be added to 1.0 l of 0.1 m glycine at 9.0 ph to bring its ph to 10.0?
To bring the pH of the solution from 9.0 to 10.0, you need to add a specific amount of 5M KOH. The pH of a solution is a measure of its acidity or alkalinity. The pH scale ranges from 0 to 14, with values below 7 being acidic, 7 being neutral, and values above 7 being alkaline or basic.
To calculate the amount of 5M KOH required, we can use the Henderson-Hasselbalch equation, which relates pH, pKa, and the concentrations of the acid and base. In this case, glycine acts as a weak acid with a pKa value of 2.34. We can assume that the glycine will be completely dissociated in the solution. The concentration of glycine is given as 0.1M, which means that [A-] = 0.1M. We can calculate the concentration of [HA], which is the undissociated form of glycine, using the equation [HA] = [A-] * 10^(pKa-pH).
Substituting the values, [HA] = 0.1M * 10^(2.34-9) = 0.000000001M. To reach a pH of 10.0, we need to add enough KOH to react with all the [HA]. The balanced equation for the reaction is: HA + OH- → A- + H2O. The stoichiometry of the reaction shows that 1 mole of HA reacts with 1 mole of OH-. Therefore, the amount of KOH required is equal to the concentration of [HA], which is 0.000000001M. In conclusion, to bring the pH of the solution from 9.0 to 10.0, you need to add 0.000000001M of 5M KOH to 1.0L of 0.1M glycine.
To know more about solution visit:
https://brainly.com/question/15757469
#SPJ11
Rank the following substances in order from most soluble in water to least soluble in water: methane, CH 4
; 1-hexanol, C 6
H 13
OH; magnesium chloride, MgCl 2
; and ethane, C 2
H 6
. Rank from most to least soluble in water. To rank items as equivalent, overlap them.
In order from most to least soluble in water: Magnesium chloride (MgCl2) > 1-hexanol (C6H13OH) > Methane (CH4) > Ethane (C2H6).
The given substances: methane (CH4), 1-hexanol (C6H13OH), magnesium chloride (MgCl2) and ethane (C2H6), can be ranked from most to least soluble in water as follows:1. Magnesium chloride (MgCl2): MgCl2 dissociates into Mg2+ and Cl- ions in water. Being ionic, MgCl2 is highly soluble in water.2. 1-hexanol (C6H13OH): 1-hexanol is a molecule with a hydroxyl group that can participate in hydrogen bonding with water molecules.
It is, therefore, moderately soluble in water.3. Methane (CH4): Methane is non-polar and does not have any charge on it. Water, being polar, does not interact with it to a significant extent. Methane is therefore almost insoluble in water.4. Ethane (C2H6): Ethane is non-polar and like methane does not have any charge on it. It is therefore not soluble in water or any other polar solvent.
To know more about Magnesium chloride visit:-
https://brainly.com/question/33426300
#SPJ11
What volume (ml) of potassium hydroxide will it take to reach the equivalence point in a 16.3 ml aliquot of triprotic acid?
To reach the equivalence point in a 16.3 ml aliquot of triprotic acid 48.9 ml of 0.1 M potassium hydroxide is needed.
An aliquot is a portion of a sample that is taken for the analysis or testing . It is also defined as the sub measured volume of the original sample.
To calculate the volume of potassium hydroxide needed to reach the equivalence point in a 16.3 ml aliquot of triprotic acid, we need to know the concentration of the potassium hydroxide solution and the molarity of the triprotic acid.
Assuming that the triprotic acid is fully ionized and that the potassium hydroxide is a strong base, we can use the following balanced chemical equation:
[tex]\rm 3 HX + KOH \rightarrow KX + 3 H_2O[/tex]
where HX is the triprotic acid and KX is the potassium salt of the acid.
At the equivalence point, the moles of acid and base are equal, so we can use the following equation to calculate the volume of potassium hydroxide needed:
moles of acid = moles of base
Molarity of acid × volume of acid = Molarity of base × volume of base
Since, the triprotic acid has three acidic protons, its molarity is three times the concentration of the 16.3 ml aliquot.
Let's assume that the concentration of the aliquot is 0.1 M, then the molarity of the triprotic acid is 0.3 M.
Let's also assume that the concentration of the potassium hydroxide solution is 0.1 M.
Using the equation above, we can solve for the volume of potassium hydroxide needed:
0.3 M × 16.3 ml = 0.1 M × volume of potassium hydroxide
volume of potassium hydroxide = 48.9 ml
Therefore, it would take 48.9 ml of 0.1 M potassium hydroxide to reach the equivalence point in a 16.3 ml aliquot of 0.3 M triprotic acid.
Learn more about aliquot here:
https://brainly.com/question/31440822
#SPJ4
131ml of hydrogen gas, measured at 22 ∘
C and 2.2 atm pressure, and 278ml of nitrogen gas, measured at 22 ∘
C and 1.5 atm pressure, were forced into the 131ml container at 22 ∘
C, what would be the pressure (in atm) of the mixture of gases now in the 131ml container? Enter to 2 decimal places.
The pressure of the mixture of gases in the 131 ml container at 22°C is approximately 2.23 atm.
Given,Volume of hydrogen gas = 131 ml
Volume of nitrogen gas = 278 ml
Temperature = 22°C
Pressure of hydrogen gas = 2.2 atm
Pressure of nitrogen gas = 1.5 atm
We can use the combined gas law, which relates the pressure, volume, and temperature of an ideal gas. The combined gas law equation is given by PV/T = constant.
Using this formula for both gases, we get,
For Hydrogen gas,
P₁V₁/T₁ = P₂V₂/T₂
On substituting the given values,
2.2 × 131/T = P₂ × 131/T2.2/T
= P₂/T(2.2/T) × T₂
= P₂ × 131
Putting the values in the above equation, we get,
P₂ = (2.2/T) × T₂
= (2.2/295) × 295
= 2.2 atm
For Nitrogen gas,
P₁V₁/T₁ = P₂V₂/T₂1.5 × 278/T
= P₂ × 131/T1.5/T
= P₂/2(1.5/T) × 295
= P₂ × 131
P₂ = (1.5/T) × 295 × (1/131)
= (1.5/131) × 295
= 3.39×10^-2 atm
Total pressure of the mixture = P₁ + P₂= 2.2 + 0.0339 ≈ 2.23 atm.
Hence, the pressure of the mixture of gases in the 131 ml container at 22°C is approximately 2.23 atm.
To know more about pressure visit:
https://brainly.com/question/29341536
#SPJ11
The pressure of the mixture of gases in the 131 ml container is approximately 6.27 atm.
We have,
The ideal gas law equation is as follows:
PV = nRT
where:
P is the pressure of the gas (in atm),
V is the volume of the gas (in liters),
n is the number of moles of gas,
R is the ideal gas constant (0.0821 L·atm/(mol·K)),
T is the temperature of the gas (in Kelvin).
Let's calculate the pressure of the mixture using the ideal gas law:
Step 1: Convert the volumes of hydrogen gas and nitrogen gas to liters.
131 ml = 131 ml * (1 L / 1000 ml) = 0.131 L
Step 2: Convert the temperatures from Celsius to Kelvin.
22°C + 273.15 = 295.15 K
Step 3: Calculate the number of moles of hydrogen gas using the ideal gas law.
For hydrogen gas:
PV = nRT
(2.2 atm) * (0.131 L) = n * (0.0821 L·atm/(mol·K)) * (295.15 K)
0.2882 = n * 24.22361515
n = 0.2882 / 24.22361515
n ≈ 0.0119 mol
Step 4: Calculate the number of moles of nitrogen gas using the ideal gas law.
For nitrogen gas:
PV = nRT
(1.5 atm) * (0.278 L) = n * (0.0821 L·atm/(mol·K)) * (295.15 K)
0.4077 = n * 24.22361515
n = 0.4077 / 24.22361515
n ≈ 0.0168 mol
Step 5: Calculate the total number of moles of gas in the mixture.
Total moles = moles of hydrogen + moles of nitrogen
Total moles ≈ 0.0119 mol + 0.0168 mol
Total moles ≈ 0.0287 mol
Step 6: Calculate the pressure of the mixture using the ideal gas law.
For the mixture:
PV = nRT
P * (0.131 L) = (0.0287 mol) * (0.0821 L·atm/(mol·K)) * (295.15 K)
0.1087 P = 0.6806
P ≈ 6.27 atm
Therefore,
The pressure of the mixture of gases in the 131 ml container is approximately 6.27 atm.
Learn more about ideal gas law here:
https://brainly.com/question/11544185
#SPJ4
Thio neutralization rebuilds the disulfide bonds by removing the _____________that was added by the permanent waving solution.
Thio neutralization rebuilds the disulfide bonds by removing the excess sulfur that was added by the permanent waving solution.
This process involves using a neutralizing solution, which helps to break down the thioglycolate and reduce its reactivity. The neutralizing solution contains an oxidizing agent, such as hydrogen peroxide, which helps to remove the excess sulfur and restore the hair's natural pH balance. By removing the excess sulfur, the disulfide bonds are able to reform, resulting in the desired curl or wave pattern.
This neutralization step is crucial in the permanent waving process to ensure the hair's integrity and prevent any further damage. In summary, thio neutralization helps rebuild the disulfide bonds by removing the excess sulfur, allowing the hair to maintain its new shape.
To know more about solution visit:
https://brainly.com/question/15757469
#SPJ11
Thio neutralization rebuilds the disulfide bonds by removing the excess sulfur that was added by the permanent waving solution.
This process involves using a neutralizing solution, which helps to break down the thioglycolate and reduce its reactivity. The neutralizing solution contains an oxidizing agent, such as hydrogen peroxide, which helps to remove the excess sulfur and restore the hair's natural pH balance. By removing the excess sulfur, the disulfide bonds are able to reform, resulting in the desired curl or wave pattern.
This neutralization step is crucial in the permanent waving process to ensure the hair's integrity and prevent any further damage. In summary, thio neutralization helps rebuild the disulfide bonds by removing the excess sulfur, allowing the hair to maintain its new shape.
To know more about solution visit:
https://brainly.com/question/15757469
#SPJ11
Thio neutralization rebuilds the disulfide bonds by removing the excess sulfur that was added by the permanent waving solution.
This process involves using a neutralizing solution, which helps to break down the thioglycolate and reduce its reactivity. The neutralizing solution contains an oxidizing agent, such as hydrogen peroxide, which helps to remove the excess sulfur and restore the hair's natural pH balance. By removing the excess sulfur, the disulfide bonds are able to reform, resulting in the desired curl or wave pattern.
This neutralization step is crucial in the permanent waving process to ensure the hair's integrity and prevent any further damage. In summary, thio neutralization helps rebuild the disulfide bonds by removing the excess sulfur, allowing the hair to maintain its new shape.
To know more about solution visit:
https://brainly.com/question/15757469
#SPJ11
How can the law of conservation of mass apply to a burning log, if all that remains of it is ash?.
The law of conservation of mass states that mass cannot be created or destroyed in a chemical reaction.
In the case of a burning log, although the log appears to be reduced to ash, the mass is still conserved. When wood burns, it undergoes a chemical reaction called combustion, where it reacts with oxygen from the air to produce carbon dioxide, water vapor, and other byproducts. These byproducts include gases and smoke that are released into the atmosphere, as well as the remaining solid residue, which is ash.
Even though the log is reduced to ash, the total mass of the ash, gases, and smoke produced is equal to the initial mass of the log. The process of combustion converts the wood's carbon, hydrogen, and other elements into different compounds, but the total mass of all the reactants and products remains the same.
Therefore, the law of conservation of mass still applies, ensuring that the total mass before and after the burning of the log remains constant.
Learn more about conservation here:
https://brainly.com/question/14549722
#SPJ 4
knowing the dissociation constant and the total concentration of both binding partners in the solution.
The equilibrium concentration of the heterodimeric complex AB ([AB]) formed by the molecules A and B in the solution is approximately 0.00301946 mol/l.
To determine the equilibrium concentration ([AB]) of the heterodimeric complex AB formed by the molecules A and B in the solution, we can use the equation for the dissociation constant (Kd) of the complex:
Kd = [A][B] / [AB]
where:
[A] is the concentration of A
[B] is the concentration of B
[AB] is the concentration of the complex AB
We are given the following values:
[A]tot = 5.345 x 10⁻⁵ mol/l
[B]tot = 1.245 x 10⁻⁴ mol/l
Kd = 2.208 x 10⁻⁶ mol/l
Since AB is formed from A and B, the total concentration of AB ([AB]) is equal to the concentration of the complex at equilibrium.
Let's assume the concentration of AB at equilibrium is x mol/l.
Using the dissociation constant equation, we have:
Kd = [A]tot * [B]tot / [AB]
Substitute the known values:
2.208 x 10⁻⁶ mol/l = (5.345 x 10⁻⁵ mol/l) * (1.245 x 10⁻⁴ mol/l) / x
Now, solve for x:
x = (5.345 x 10⁻⁵ mol/l) * (1.245 x 10⁻⁴ mol/l) / 2.208 x 10⁻⁶ mol/l
x ≈ 0.00301946 mol/l
Therefore, the equilibrium concentration of the heterodimeric complex AB ([AB]) formed by the molecules A and B in the solution is approximately 0.00301946 mol/l.
Learn more about equilibrium concentration from the link given below.
https://brainly.com/question/16645766
#SPJ4
What masses of dimethylamine and dimethylammonium chloride do you need to prepare 4.00 l of ph = 12.00 buffer if the total concentration of the two components is 0.500 m?
45.1 g of DMA and 119.0 g of DMAC are required to make 4.00 L of pH 12.00 buffer with equal concentrations of DMA and DMAC at a total concentration of 0.500 M.
Buffers are used to smooth the flow of data in a computer system and prevent bottlenecks. They are used in many different contexts, such as streaming video, network communications, and file input/output operations. Buffers can also be used to improve performance by minimising the number of read and write operations that are required.
pH = pKa + log ([base]/[acid])
[base] >> [acid]
pH ≈ pKa + log [base]
[base] =[tex]10^{(pH - pKa)}[/tex]
[base] =[tex]10^{(12.00 - 10.7) }[/tex]
= 2.24 M
[acid] = 0.500 M - [base]
[acid] = 0.500 M - 2.24 M
= -1.74 M
pH = pKa + log [base]/[acid]
= 10.7 + log (0.250/0.250)
= 10.7
DMA: 45.1 g/mol
DMAC: 119.0 g/mol
moles DMA = (0.250 M) (4.00 L)
= 1.00 mol
moles DMAC = (0.250 M) (4.00 L)
= 1.00 mol
mass DMA = (1.00 mol) (45.1 g/mol)
= 45.1 g
mass DMAC = (1.00 mol) (119.0 g/mol)
= 119.0 g
To know more about buffer, here:
https://brainly.com/question/31847096
#SPJ4
6. (4 points) Consider 2,2.4-trimethvlhexane sighting along C3-C4: Draw the Newman projections of 2,2,4-trimethylhexane showing the most stable staggered conformation and the least stable eclipsed conformation.
The most stable staggered conformation of 2,2,4-trimethyl hexane minimizes steric hindrance, while the least stable eclipsed conformation maximizes steric hindrance.
To draw the Newman projections of 2,2,4-trimethyl hexane, we need to consider the relative positions of the atoms and groups along the[tex]C_{3}-C_{4}[/tex]bond. Here's how you can draw the most stable staggered conformation and the least stable eclipsed conformation:
Most Stable Staggered Conformation:
In the most stable staggered conformation, the methyl groups are positioned as far apart as possible, minimizing steric hindrance. Here's how you can draw it: (image)
In this conformation, the front carbon ([tex]C_{3}[/tex]) is represented by a dot, and the rear carbon ([tex]C_{4}[/tex]) is represented by a circle. The groups on the front carbon ([tex]C_{3}[/tex]) are shown in the axial position, while the groups on the rear carbon ([tex]C_{4}[/tex]) are shown in the equatorial position.
Least Stable Eclipsed Conformation:
In the least stable eclipsed conformation, the methyl groups are positioned directly in front of each other, leading to significant steric hindrance. Here's how you can draw it: (image)
In this conformation, the front carbon ([tex]C_{3}[/tex]) is represented by a dot, and the rear carbon ([tex]C_{4}[/tex]) is represented by a circle. The groups on both carbons are aligned, creating a higher energy conformation due to increased steric hindrance.
Remember that the most stable conformation is the one with the least steric hindrance, while the least stable conformation has the most steric hindrance.
To learn more about Steic Hindrance click the given link
brainly.com/question/6419720
#SPJ4
A diabetic is recommended to use 1 ml of insulin for every 10 g of carbohydrates consumed. the recommended daily intake of carboydrates is 300 g. a diabetic has eaten a slice of toast and has consumed 5% of their daily value of carbohydrates. how many ml of insulin should the diabetic use to maintain a proper blood sugar level after eating the piece of toast?
The diabetic should use 1.5 ml of insulin to maintain a proper blood sugar level after eating the piece of toast.
Insulin is a hormone that plays a crucial role in regulating blood sugar levels in the body, particularly in individuals with diabetes. In a person with diabetes, the body either doesn't produce enough insulin or is unable to effectively use the insulin it produces.
Insulin helps facilitate the absorption of glucose (sugar) from the bloodstream into cells, where it is used for energy or stored for later use. It acts as a "key" that unlocks cells, allowing glucose to enter.
The goal of insulin therapy in diabetes management is to keep blood sugar levels within a target range to prevent complications associated with high or low blood sugar. The dosage and timing of insulin administration are determined based on factors such as individual needs, carbohydrate intake, activity level, and blood sugar monitoring.
If the recommended daily intake of carbohydrates is 300 g, and the slice of toast represents 5% of that,
Carbohydrates in the slice = 5% of 300 g = (5/100) * 300 g = 15 g
It is recommended that the ratio of 1 ml of insulin for every 10 g of carbohydrates,
Insulin needed = (Carbohydrates in the slice) / 10 = 15 g / 10 = 1.5 ml
Learn more about Insulin, here:
https://brainly.com/question/33442808
#SPJ4
Enter your answer in the provided box. Hydrogen fluoride is used in the manufacture of Freons (which destroy ozone in the stratosphere) and in the production of aluminum metal. It is prepared by the reaction CaF 2
+H 2
SO 4
→CaSO 4
+2HF In one process, 5.85 kg of CaF 2
is treated with an excess of H 2
SO 4
and yields 2.35 kg of HF. Calculate the percent yield of HF.
The percent yield of HF can be calculated by dividing the actual yield (2.35 kg) by the theoretical yield and multiplying by 100. The theoretical yield is determined based on the stoichiometry of the reaction and the given amount of CaF2 (5.85 kg). The percent yield represents the efficiency of the reaction in producing the desired product.
The balanced chemical equation for the reaction is: CaF2 + H2SO4 -> CaSO4 + 2HF.
From the given data, we have 5.85 kg of CaF2 and the actual yield of HF is 2.35 kg.
To determine the theoretical yield of HF, we use the stoichiometry of the reaction. According to the balanced equation, 1 mole of CaF2 produces 2 moles of HF. We need to convert the mass of CaF2 to moles using its molar mass. CaF2 has a molar mass of approximately 78 g/mol.
Calculating the moles of CaF2: 5.85 kg * (1000 g/kg) / 78 g/mol = 75 moles.
Since the mole ratio between CaF2 and HF is 1:2, the theoretical yield of HF is 2 * 75 moles = 150 moles.
Converting moles of HF to mass: 150 moles * (20 g/mol) = 3000 g or 3 kg.
The percent yield is calculated as (actual yield / theoretical yield) * 100 = (2.35 kg / 3 kg) * 100 ≈ 78.3%.
To know more about chemical equation here: brainly.com/question/28792948
#SPJ11
When 1-bromo-2-methyclohexane undergoes solvolysis in methanol, five major products are formed. Give mechanism to account for these products
Answer:When 1 -bromo-2-methylcyclohexane undergoes solvolysis in methanol, four major products are formed. Give mechanisms to account for these products. Video Answer: ... When cis-1-bromo-2-methylcyclohexane undergoes an E2 reaction, two products (cycloalkenes) are formed
Explanation:
in a naturally occurring sample, 69.2 % of copper atoms have 34 neutrons and 30.8 % have 36 neutrons. what is the average mass of the atoms in your drawing? (copper-63 has a mass of 62.92960 amu , and copper-65 has a mass of 64.92779 amu .)
The average mass of the copper atoms in the sample is 63.4622232 amu.
The average mass of the copper atoms in the sample can be calculated by multiplying the mass of each isotope by its percentage abundance and summing the results.
Copper-63: 69.2% x 62.92960 amu = 43.480832 amu
Copper-65: 30.8% x 64.92779 amu = 19.9813912 amu
Adding these values together:
43.480832 amu + 19.9813912 amu = 63.4622232 amu
Therefore, the average mass of the copper atoms in the sample is 63.4622232 amu.
Learn more about isotope here:
https://brainly.com/question/27475737
#SPJ11
Ammonia is a stronger ligand than water. which is correct when concentrated aqueous ammonia solution is added to dilute aqueous copper(ii) sulfate solution?
The correct statement is that the concentrated aqueous ammonia solution will cause the formation of the copper(II) tetraammine complex by displacing water molecules.
When concentrated aqueous ammonia solution is added to dilute aqueous copper(II) sulfate solution, the following reaction occurs:
CuSO₄(aq) + 4NH₃(aq) → [Cu(NH₃)₄(H₂O)n]²⁺(aq) + SO₄²⁻(aq)
In this reaction, ammonia (NH₃) acts as a ligand and forms a complex with the copper ion (Cu²⁺). The resulting complex is called a copper(II) tetraammine complex, [Cu(NH₃)₄(H₂O)n]²⁺, where n represents the number of water molecules attached to the complex.
Ammonia is a stronger ligand than water, meaning it has a higher affinity for forming complexes with metal ions. When concentrated aqueous ammonia is added to the copper(II) sulfate solution, ammonia displaces water molecules from the coordination sphere of the copper ion and forms the copper(II) tetraammine complex.
Learn more about copper(II) tetraammine complex, here:
https://brainly.com/question/29137939
#SPJ4
A student used H2SO4 to find concentration of Sr+2 in a solution A via precipitation method. For
100 ml of solution A, the student added 20 ml of 1M H2SO4, marked as solution B, waited for
precipitation, decanted the liquid, and finally got 1.03 g of dried SrSO4. The student also collected
the decanted liquid and labeled as solution C.
Hint: Ksp of SrSO4 = 3.44 x 10-7
a) Find concentration of Sr+2 in solution A.
b) Find concentration of Sr+2 in the decanted solution C after precipitation and decanting
solution B
c) Compare [Sr+2] in solution A and decanted solution C. Does your result make sense?
a) The concentration of Sr+2 in solution A is 0.020 mol/L.
b) The concentration of Sr+2 in the decanted solution C is lower than 0.020 mol/L.
c) The result makes sense as the precipitation process reduces the concentration of Sr+2 in the remaining liquid.
a) To find the concentration of Sr+2 in solution A, we can use the stoichiometry of the reaction between Sr+2 and H2SO4.
From the balanced equation: Sr+2 + H2SO4 -> SrSO4 + 2H+
We can see that for every mole of Sr+2, 1 mole of H2SO4 is required.Since 20 ml of 1M H2SO4 is added to 100 ml of solution A, we have 20 mmol (0.020 mol) of H2SO4.
Since the stoichiometry of the reaction is 1:1, the concentration of Sr+2 in solution A is also 0.020 mol/L.
b) After precipitation and decanting of solution B, the decanted liquid is labeled as solution C. The concentration of Sr+2 in solution C will depend on the amount of Sr+2 that precipitated as SrSO4 and was removed with the precipitate.
To determine the concentration of Sr+2 in solution C, we need to consider the solubility product constant (Ksp) of SrSO4. The molar mass of SrSO4 is 183.68 g/mol.
Given that 1.03 g of dried SrSO4 was obtained, we can calculate the moles of SrSO4 produced:
moles of SrSO4 = 1.03 g / 183.68 g/mol ≈ 0.00561 mol
Since the stoichiometry of the reaction is 1:1, the moles of Sr+2 in solution C is also 0.00561 mol.
The volume of solution C is not given, so we cannot determine its concentration directly. However, we can say that the concentration of Sr+2 in solution C is lower than 0.020 mol/L (the initial concentration in solution A) since some of it precipitated as SrSO4.
c) The comparison of [Sr+2] in solution A and decanted solution C shows that the concentration of Sr+2 in solution C is lower than in solution A. This makes sense because during the precipitation process, some of the Sr+2 ions combined with SO4-2 ions to form the insoluble SrSO4 precipitate, reducing the concentration of Sr+2 in the remaining liquid.
For more such question on concentration visit:
https://brainly.com/question/28564792
#SPJ8
Assume that a certain element (let's call it X) has two (and only two) isotopes: 35
X(35.0 a.m.u.) and 37
X(37.0 a.m.u) with the natural abundances of 75.0% and 25.0%, respectively. What is the atomic weight of X ? 35.3 a.m.u. 36.5 a.m.u. 35.5 a.m.u. 36.0 a.m.u. 36.7 a.m.u.
The atomic weight of X is 35.5 a.m.u.The atomic weight of an element can be determined by the sum of the atomic masses of its isotopes.
The atomic weight (A) of X can be calculated using the formula given below,
A = (% abundance of isotope 1 / 100) × (mass of isotope 1) + (% abundance of isotope 2 / 100) × (mass of isotope 2)
Given that X has two isotopes: 35 X (35.0 a.m.u.) and 37 X (37.0 a.m.u) with natural abundances of 75.0% and 25.0%, respectively.
By substituting the values in the formula,
A = (75 / 100) × (35) + (25 / 100) × (37) = 26.25 + 9.25 = 35.5 a.m.u.
To know more about atomic weight visit:-
https://brainly.com/question/31832331
#SPJ11
The rate of reaction of calcium carbonate (chalk) with hydrochloric acid likely depends on _____.
The rate of reaction of calcium carbonate (chalk) with hydrochloric acid likely depends on the concentration of hydrochloric acid, the particle size of the calcium carbonate, and the temperature.
Factors that can affect the rate of reaction between calcium carbonate and hydrochloric acid include the following: The concentration of hydrochloric acid: The greater the concentration of the acid, the more quickly the reaction will occur.
The particle size of the calcium carbonate: The smaller the particles, the more rapidly they will react because there is more surface area available for the acid to act upon.
Temperature: The higher the temperature, the quicker the reaction will proceed because particles will be moving more quickly and colliding with greater force and frequency.
Know more about rate of reaction:
https://brainly.com/question/28566775
#SPJ4
biomass burning unlikely to account for missing source of carbonyl sulfide. geophysical research letters
Biomass burning is likely to account for missing source of carbonyl sulfide. Burning biomass has long been known to be an OCS source, especially in smouldering fires.
The most prevalent sulphur gas in the atmosphere, carbonyl sulphide (OCS or COS), is significant as a source of stratospheric aerosols as well as a tracer for gross primary production. The activities required to maintain the OCS budget balance are not entirely taken into account by the surface fluxes and atmospheric sinks of OCS that are currently estimated.
DMS is a consequence of phytoplanktonic activity, and COS and CS2 are largely formed in the ocean through photochemical reactions involving organosulfur compounds. The significant rise in ocean COS emissions throughout the deglaciation means that all three sulphur gases have seen increased emissions. COS is a precursor to background stratospheric sulphate aerosol, which has an adverse effect on the chemistry of the stratosphere and a net radiative effect.
To know about biomass
https://brainly.com/question/1226509
#SPJ4
the rate of decomposition of ph3 was studied at 861.00 °c. the rate constant was found to be 0.0575 s–1.
the concentration of P[tex]H_{3}[/tex] after 12.50 seconds is approximately 0.313 M.
To determine the concentration of P[tex]H_{3}[/tex] after 12.50 seconds, we can use the first-order rate equation:
[tex]\[ \text{Rate} = k \cdot [\text{PH_{3} }] \][/tex] P[tex]H_{3}[/tex]]
Given:
Initial concentration of P[tex]H_{3}[/tex] = 0.95 M
Rate constant (k) = 0.0745[tex]s^(-1)[/tex]
Time (t) = 12.50 s
Using the first-order rate equation, we can rearrange it to solve for the concentration of P[tex]H_{3}[/tex]at a specific time:
{ P[tex]H_{3}[/tex]} = { P[tex]H_{3}[/tex]} [tex]e^{-kt}[/tex]
Substituting the given values:
[tex]PH_{3} = 0.95 \, \text{M} \cdot e^{-(0.0745 \, \text{s}^{-1} \cdot 12.50 \, \text{s})} \][/tex]
Calculating this expression, we find:
{ P[tex]H_{3}[/tex]} = 0.313
Therefore, the concentration of P[tex]H_{3}[/tex] after 12.50 seconds is approximately 0.313 M.
learn more about rate constant :
https://brainly.com/question/20305922
#SPJ4
The rate of decomposition of PH3 was studied at 861.00 °C. The rate constant was found to be 0.0745 s–1. If the reaction is begun with an initial PH3 concentration of 0.95 M, what will be the concentration of PH3 after 12.50 s?
At -57 oC the equilibrium constant for the reaction:
2 HI(g) H2(g) + I2(g)
is KP = 7.21e-12. If the initial pressure of HI is 0.00506 atm, what are the equilibrium partial pressures of HI, H2, and I2?
p(HI) = .
p(H2) = .
p(I2) = .
Therefore, the answers are: p(HI) = 845.2 × 10⁻⁶ atmp(H2) = 422.6 × 10⁻⁶ atmp(I2) = 422.6 × 10⁻⁶ atm
Given the chemical equation:2 HI(g) ⇌ H2(g) + I2(g)At -57 oC
the equilibrium constant for the above reaction:
KP = 7.21 × 10⁻¹²
Also, the initial pressure of HI is 0.00506 atm.
The balanced chemical equation can be represented as:
H2(g) + I2(g) ⇌ 2 HI(g)
Here, 2 moles of HI will give 1 mole each of H2 and I2 at equilibrium.
If "x" is the equilibrium concentration of HI,
then the equilibrium concentrations of H2 and I2 will be "x/2" each.
Therefore, the expression for equilibrium constant (KP) can be written as:
KP = (p(HI))^2/ (p(H2) x p(I2))
Where,
p(HI) = Partial pressure of HIp(H2) = Partial pressure of H2p(I2) = Partial pressure of I2
Given:
KP = 7.21 × 10⁻¹²
p(HI) = 0.00506 atm
And, p(H2) = p(I2) = x/2
Let us assume the value of "x" to be the equilibrium concentration of HI.
Then,
KP = (p(HI))²/ (p(H2) x p(I2))7.21 × 10⁻¹²
KP = (0.00506 atm)²/ (x/2)²
or
x² = (2 × 0.00506²) / 7.21 × 10⁻¹²
or
x² = 0.7149 × 10⁶
or
x = 845.2
So, the equilibrium partial pressures of HI, H2, and I2 are:
p(HI) = 845.2 x 10⁻⁶
atmp(H2) = 422.6 x 10⁻⁶
atmp(I2) = 422.6 x 10⁻⁶atm
to know more about partial pressure visit:
https://brainly.com/question/30114830
#SPJ11
