The Resistance of Nichrome Wire The radius of a piece of Nichrome wire is 0.328 mm. (Assume the wire's temperature is 20°C.) (a) Calculate the resistance per unit length of this wire. SOLUTION Concep

The unit of current, the ampere (A), is indeed defined in terms of the force between currents, in the given scenario, the force between the two wires carrying a current of 1.0 A each and separated by a distance of 2.0 mm is 0.0001 newtons.

According to the definition, one ampere is the amount of current that, when flowing through two parallel conductors placed one meter apart in a vacuum, produces a force of exactly 2 × 10^(-7) newtons per meter of length.

In the scenario you described, two 1.0-meter-long sections of very long wires are placed a distance of 2.0 mm (0.002 meters) apart. Each wire carries a current of 1.0 ampere (A). Since the wires are parallel and separated by a small distance, there will be an attractive force between them due to the interaction of their currents.

To calculate the force between the wires, we can use the formula for the force between parallel conductors:

F = (μ₀ * I₁ * I₂ * L) / (2πd),

where F is the force, μ₀ is the permeability of free space (approximately 4π × 10^(-7) N/A²), I₁ and I₂ are the currents in the wires, L is the length of the wires, and d is the distance between them.

Plugging in the values, we have:

F = (4π × 10^(-7) N/A² * 1.0 A * 1.0 A * 1.0 m) / (2π * 0.002 m)

= (4 × 10^(-7) N * m²/A²) / (0.004 m)

= 1 × 10^(-4) N.

To know more about current, click here:

https://brainly.com/question/15328978

#SPJ11

A balloon has an initial volume of 3.00 liters at 24.0°C. The balloon is heated to 48.0°C. The new volume of the balloon is 3.24 liters. The correct answer is option B, 3.24 L.

At constant pressure, the volume of a gas is directly proportional to its absolute temperature. That is, when the temperature of a gas increases, the volume of the gas increases, and when the temperature of the gas decreases, the volume of the gas decreases.

This relationship is expressed mathematically by the following equation: V2 = (T2/T1)V1 where V1 is the initial volume of the balloon and T1 is the initial temperature of the balloon, V2 is the final volume of the balloon and T2 is the final temperature of the balloon. Now, substituting the values into the equation we get

V2 = (48.0 + 273.15) / (24.0 + 273.15) × 3.00V2

321.15 / 297.15 × 3.00V2  

3.24 L.

Therefore, the new volume of the balloon is 3.24 liters.

Learn more about pressure here:

https://brainly.com/question/14143912

#SPJ11

When unbalanced forces act on an object, the resultant will be larger than any of the individual forces.

When multiple unbalanced forces act on an object, their combined effect is known as the resultant force. The resultant force determines the object's acceleration and its motion.

To calculate the resultant force, you would add the individual forces together vectorially. However, in this case, no specific forces or calculations are provided. Instead, we can focus on understanding the concept of the resultant force.

When unbalanced forces act on an object, it means that the forces are not balanced and do not cancel each other out. In this situation, the object will experience a net force in a particular direction.

The resultant force is the vector sum of all the individual forces acting on the object. Since the forces are unbalanced, the resultant force will be larger than any of the individual forces. It represents the combined effect of all the forces, causing the object to accelerate or change its motion.

When unbalanced forces act on an object, the resultant force will be larger than any of the individual forces. This occurs because the forces are not balanced and have a cumulative effect on the object's motion.

To know more about forces visit:

https://brainly.com/question/30464630

#SPJ11

The highest velocity the skier could reach by the end of the 100 m long slope is approximately 28.8 m/s.

To find the highest velocity the skier could reach, we can use the principles of linear motion and consider the skier's acceleration and the distance traveled.

Length of the slope (s) = 100 m

Slope angle (θ) = 25°

We can resolve the slope into its components:

Vertical component (mg sin θ) = m * g * sin(25°)

Horizontal component (mg cos θ) = m * g * cos(25°)

Since the skier starts from rest, the initial velocity (v₀) is 0 m/s.

Using the equations of motion, we can find the final velocity (v) at the end of the slope:

v² = v₀² + 2 * a * s

The acceleration (a) can be calculated as the component of acceleration parallel to the slope:

a = g * sin θ

Substituting the values into the equation:

v² = 0 + 2 * g * sin θ * s

v = √(2 * g * sin θ * s)

Plugging in the given values and performing the calculations:

g ≈ 9.8 m/s²

θ = 25°

s = 100 m

v ≈ √(2 * 9.8 m/s² * sin 25° * 100 m)

v ≈ √(19.6 * 0.4226 * 100)

v ≈ √(831.6)

v ≈ 28.8 m/s

Therefore, the highest velocity the skier could reach by the end of the 100 m long slope is approximately 28.8 m/s.

The skier could reach a maximum velocity of approximately 28.8 m/s by the end of the 100 m long slope.

To know more about velocity, visit:

https://brainly.com/question/80295

#SPJ11

The sides of the new shape when it moves parallel to one of its diagonals with a speed of 0.70c will be 1.7939 m.

The length of a square frame with sides of 1.85 m when at rest will be computed while it moves parallel to one of its diagonals with a speed of 0.70c. The size of the sides of the new shape is sought.What is the length of the square frame?The length of the square frame is equal to the size of its sides and is given as 1.85 m.What is the speed of light (c)?The speed of light is approximately 3.0 × 108 m/s.

How do you calculate the length of an object when moving at a constant speed?When an object is moving at a constant velocity, time can be defined as distance divided by speed. To find the new size of the square frame when it moves parallel to one of its diagonals with a speed of 0.70c, we must first determine the length of the square frame when it moves at this speed.

The length of an object moving at a constant speed is defined as:L = L0 / √ (1 - v^2/c^2)where L0 is the length of the object when it is stationary, v is the velocity of the object, and c is the speed of light in a vacuum.L = (1.85) / √ (1 - (0.70c)^2/c^2)L = (1.85) / √ (1 - 0.49)L = (1.85) / √ (0.51)L = 2.5357 m

To get the length of the new shape, we'll need to divide the length of the square frame by the square root of two since it's moving parallel to one of its diagonals.The length of the new shape is:L' = 2.5357 / √2L' = 1.7939 m

Therefore, the sides of the new shape when it moves parallel to one of its diagonals with a speed of 0.70c will be 1.7939 m.

To learn more about sides visit;

https://brainly.com/question/31139338

#SPJ11

The maximum magnetic flux through an inductor connected to a standard electrical outlet with ΔVrms = 110 V and f = 56.0 Hz is given by 0.00098 / L T * m².

Given,ΔVrms = 110 V and f = 56.0 Hz.

Maximum magnetic flux is given by;ϕmax = ΔVrms / (2πfL)

Where L is the inductance of the inductor.

Substitute the given values of ΔVrms and f in the above expression;ϕmax = 110 / (2 × 3.14 × 56 × L)Simplifying the above equation,ϕmax = 0.00098 / L...equation (1)The unit of magnetic flux is Weber or Wb.

To calculate the magnetic flux in T * m², we need to convert Weber into T * m².1 Wb = 1 T * m²

Substitute 1 T * m² = 1 Wb in equation (1),ϕmax = 0.00098 / L * 1 T * m²

Maximum magnetic flux through an inductor connected to a standard electrical outlet with ΔVrms = 110 V and f = 56.0 Hz is given by 0.00098 / L T * m².

Given,

ΔVrms = 110 V and f = 56.0 Hz.

Maximum magnetic flux is given by;ϕmax = ΔVrms / (2πfL)

Where L is the inductance of the inductor.

Substitute the given values of ΔVrms and f in the above expression;ϕmax = 110 / (2 × 3.14 × 56 × L)Simplifying the above equation,ϕmax = 0.00098 / L...equation (1)The unit of magnetic flux is Weber or Wb.

To calculate the magnetic flux in T * m², we need to convert Weber into T * m².1 Wb = 1 T * m²Substitute 1 T * m² = 1 Wb in equation (1),ϕmax = 0.00098 / L * 1 T * m²

Learn more about magnetic flux: https://brainly.com/question/1596988

#SPJ11

The temperature (T) represented by the given root-mean-square velocity (Uᵣₘₛ) of water molecules is approximately 2.23 × 10⁵ Kelvin.

The root-mean-square velocity (Uᵣₘₛ) of gas molecules can be related to temperature (T) using the Boltzmann constant (k) and the molar mass (M) of the gas. The formula is as follows:

Uᵣₘₛ = √((3kT) / M)

We are given that the molecular mass of water (H₂O) is 18.0 g/mol, and the root-mean-square velocity (Uᵣₘₛ) is 1350 m/s.

First, we need to convert the molecular mass of water to kg/mol:

M = 18.0 g/mol = 0.018 kg/mol

Rearranging the formula, we have:

T = (Uᵣₘₛ² * M) / (3k)

Now, we substitute the given values into the formula:

T = (1350 m/s)² * (0.018 kg/mol) / (3 * 1.38 × 10⁻²³ J/K)

Calculating the value:

T ≈ 2.23 × 10⁵ K

To learn more about root-mean-square velocity  refer here:

https://brainly.com/question/2020688#

#SPJ11

For an arbitrary invertible transformation t(x) = ax, where x and a are vectors or matrices, and a is an invertible matrix, the lengths of the semi-major and semi-minor axes of t(Ω) are determined by the singular values of a.

Let's denote the singular values of a as σ1, σ2, ..., σn, where n is the dimension of the vectors or matrices. The singular values of a are the square roots of the eigenvalues of the matrix product a^T * a, where a^T is the transpose of a.The relationship between the lengths of the semi-major and semi-minor axes, a and b respectively, and the determinant of a, det(a), is given by a = σ1 * sqrt(det(a))

b = σ2 * sqrt(det(a)) Here, σ1 represents the largest singular value of a, and σ2 represents the second largest singular value. The determinant of a, det(a), is a measure of the scaling or volume change induced by the transformation.

To know more about volume visit :

https://brainly.com/question/28058531

#SPJ11

Maximum torque that could be exerted with a force of this magnitude is equal to the product of the distance between the point of rotation and the point of application of force, and the force. This value will be in Nm (Newton meters).

To calculate the maximum torque that could be exerted with a force of a particular magnitude, we need to know the distance between the point of rotation and the point of application of force.

The formula for torque is given as follows: T= r * F * sinθ  whereT= torque (Nm)r= distance from the axis or pivot point to the point of application of force (m)F= force (N)

θ= the angle between the force vector and the line connecting the point of application of force and the axis of rotation (degrees)

To find the maximum torque that could be exerted with a force of a particular magnitude, we need to use the formula above, and take the sine of the angle to be 1 (which is the maximum value it can take),

thus:T= r * F * 1T= r * F

Therefore, the maximum torque that can be exerted with a force of this magnitude is equal to the product of the distance between the point of rotation and the point of application of force, and the force.

This value will be in Nm (Newton meters).

Maximum torque that could be exerted with a force of this magnitude is equal to the product of the distance between the point of rotation and the point of application of force, and the force. This value will be in Nm (Newton meters).

Learn more about force

brainly.com/question/30507236

#SPJ11

The timbre, voices, time, and form of the song cannot be determined without listening to the music or accessing the provided link.

However, I can provide a general description of the elements you mentioned.

"Timbre" refers to the unique quality of sound produced by different instruments or voices. The specific timbre of "East St. Louis Toodle-oo" would require listening to the music itself.

The song may feature a variety of instruments and possibly vocal performances, but the details cannot be determined without accessing the provided link.

Regarding "time" and "form," these aspects refer to the structure and arrangement of the music. Again, without direct access to the specific song, it is not possible to provide a detailed analysis of its time signature, tempo, or form.

To fully explore the timbre, voices, time, and form of Duke Ellington's "East St. Louis Toodle-oo," I recommend listening to the song directly or consulting a musical analysis from a reliable source.

Learn more about timbre

brainly.com/question/29790908

#SPJ11

First let's see what the funny letters in the equation they gave us means.

F = Gravitational Force

G = Gravitational Constant

m1 = Mass of one of the spheres

m2 = Mass of the other sphere

r = Distance between the two spheres

Ok, now implement it.

[tex]\frac{9.8 x 10^{2} 1.96 x 10^{2} }{4^{2} }[/tex]

To make it simpler

F = 980 x 196 = 192,080

192,080 ÷ 4²

192,080 ÷ 16

= 12005

F = 12,005N

B) A human hair. Today's nanotechnology-produced computer transistors are roughly equivalent in size to a human hair.

Transistors are electronic devices that are used to amplify or switch electronic signals and electrical power. They are fundamental building blocks of modern electronic devices and integrated circuits. Transistors are typically made from semiconductor materials, such as silicon, and they consist of three layers: the emitter, base, and collector. The size of transistors has been continuously shrinking over the years due to advancements in nanotechnology, allowing for more transistors to be packed onto a single chip, resulting in increased computational power and miniaturization of electronic devices. Today, transistors can be manufactured at the nanoscale, with dimensions on the order of tens of nanometers or even smaller.

To know more about dimensions visit :

https://brainly.com/question/31106945

#SPJ11

To determine the time it takes to achieve an angular velocity of ω = 198 rad/s, given that at t = 0, θ = 1 rad, we can use the equation of angular motion.

The equation that relates angular displacement, angular velocity, and time is θ = ω₀t + (1/2)αt², where θ is the angular displacement, ω₀ is the initial angular velocity, t is the time, α is the angular acceleration, and t² denotes t squared.

In this case, we are given that ω₀ = 0 since the initial angular velocity is not provided. Assuming there is no angular acceleration mentioned, we can simplify the equation to θ = (1/2)αt².

Rearranging the equation to solve for time, we have t = sqrt((2θ) / α).

Substituting the given values, θ = 1 rad and ω = 198 rad/s, we need additional information on the angular acceleration (α) to calculate the time it takes to achieve the given angular velocity.

To know more about  angular acceleration, click here:

https://brainly.com/question/30237820

#SPJ11

The minimum thickness of the film with a refractive index of 1.25 is approximately 58.1 nm.

When white light reflects from a film, interference occurs due to the difference in path length traveled by the light waves. In order for a greenish-yellow color to appear, the path difference between the reflected waves should be equal to the wavelength of the most intense color, which is 570 nm.

The path difference (Δd) can be calculated using the formula:

Δd = (2 * n * d) / λ

where n is the refractive index of the film (Nfilm - 1.25), d is the thickness of the film, and λ is the wavelength of light (570 nm).

To find the minimum thickness (I) of the film, we need to consider that the path difference should be equal to half the wavelength (λ/2) to create constructive interference for the greenish-yellow color.

Δd = (2 * n * d) / λ = λ/2

Rearranging the formula, we can solve for the minimum thickness:

d = (λ^2) / (4 * n)

Substituting the values, we get:

d = (570 nm)^2 / (4 * 1.25)

Calculating this, we find:

d ≈ 58.1 nm

Therefore, the minimum thickness of the film is approximately 58.1 nm.

The minimum thickness of the film with a refractive index of 1.25, in order for a greenish-yellow color to appear, is approximately 58.1 nm.

To know more about thickness , visit:

https://brainly.com/question/27872530

#SPJ11

Here are three displacements, each in meters: d₁ = 5.0+ 6.13 - 2.1k, d₂ = - 1.0+ 2.0 + 3.0k, and d3 = 4.01 +3.0 +2.0k. The displacement 7 = (7ₓ, 7ᵧ, 7ₖ) = (-5.22, 8.0, -3.1) meters.

To find the displacement 7 = d₁ - d₂ + d₃, we need to subtract the components of d₂ from d₁ and then add the components of d₃. Let's calculate each component separately.

For the x-component (i), we have:

d₁ₓ = 5.0 - 1.0 + 4.01 = 8.01

d₂ₓ = 6.13 + 2.0 + 3.0 = 11.13

d₃ₓ = -2.1

So, 7ₓ = d₁ₓ - d₂ₓ + d₃ₓ = 8.01 - 11.13 - 2.1 = -5.22

For the y-component (j), we have:

d₁ᵧ = 0 + 2.0 + 3.0 = 5.0

d₂ᵧ = 0

d₃ᵧ = 3.0

So, 7ᵧ = d₁ᵧ - d₂ᵧ + d₃ᵧ = 5.0 - 0 + 3.0 = 8.0

For the z-component (k), we have:

d₁ₖ = -2.1

d₂ₖ = 3.0

d₃ₖ = 2.0

So, 7ₖ = d₁ₖ - d₂ₖ + d₃ₖ = -2.1 - 3.0 + 2.0 = -3.1

To know more about "Displacements" refer here:

https://brainly.com/question/17693792#

#SPJ11

The probability that less than three of the 10 students selected at random from the physics majors are from ethnic minorities is 0.676.

In the given case, the total percentage of physics majors belonging to ethnic minorities is 20%.The probability of choosing a student who belongs to an ethnic minority is therefore:P(Ethnic Minority) = 0.20Let n be the number of students selected at random from physics majors. Then the probability that less than 3 of the students are from ethnic minorities is:P(X < 3) = P(X = 0) + P(X = 1) + P(X = 2)where X is a random variable that represents the number of students from ethnic minorities in a sample of size n.In order to find P(X = 0), P(X = 1), and P(X = 2), we will use the binomial distribution formula:P(X = k) = (n choose k) * p^k * (1-p)^(n-k)where (n choose k) is the binomial coefficient which represents the number of ways to choose k items from a set of n items, and p is the probability of success (i.e., choosing a student who belongs to an ethnic minority).Using this formula, we get:P(X = 0) = (10 choose 0) * 0.20^0 * 0.80^10 = 0.1074P(X = 1) = (10 choose 1) * 0.20^1 * 0.80^9 = 0.2684P(X = 2) = (10 choose 2) * 0.20^2 * 0.80^8 = 0.3289Therefore, P(X < 3) = P(X = 0) + P(X = 1) + P(X = 2) = 0.1074 + 0.2684 + 0.3289 = 0.676.

Know more about probability, here:

https://brainly.com/question/31828911

#SPJ11

The equation ∫[x] √xp₁₁(x)dx = 4n²-1 can be proven using the given recurrence relation (n+1)Pₙ₊₁(x) - (2n+1)xpₙ(x) + npₙ₋₁(x) = 0.

To prove this, we will use mathematical induction.

Base Case: For n = 1, the recurrence relation becomes (1+1)P₂(x) - (2*1+1)xp₁(x) + 1p₀(x) = 0, which simplifies to 2P₂(x) - 3xp₁(x) + p₀(x) = 0.

Inductive Hypothesis: Assume that the equation ∫[x] √xpₙ(x)dx = 4n²-1 holds true for some arbitrary integer n.

Inductive Step: We need to show that the equation holds true for n+1. Using the recurrence relation, we have (n+2)Pₙ₊₂(x) - (2n+3)xpₙ₊₁(x) + (n+1)pₙ(x) = 0.

Now, let's integrate both sides of this equation with respect to x from 0 to x, which gives us:

∫[x] (n+2)Pₙ₊₂(x)dx - ∫[x] (2n+3)xpₙ₊₁(x)dx + ∫[x] (n+1)pₙ(x)dx = 0.

Using the fundamental theorem of calculus and the inductive hypothesis, we can simplify this equation to:

(n+2)Pₙ₊₁(x) - (2n+3)∫[x] xpₙ₊₁(x)dx + (n+1)Pₙ(x) - (n+1)pₙ₋₁(x) = 0.

Rearranging and solving for ∫[x] xpₙ₊₁(x)dx, we get:

∫[x] xpₙ₊₁(x)dx = (n+2)Pₙ₊₁(x) + (n+1)pₙ₋₁(x) - (n+1)Pₙ(x) / (2n+3).

Substituting n+1 for n in the inductive hypothesis equation, we have:

∫[x] xpₙ(x)dx = 4(n+1)²-1 = 4n²+8n+3.

Finally, substituting the derived equation for ∫[x] xpₙ₊₁(x)dx into the inductive hypothesis equation, we get:

∫[x] √xpₙ₊₁(x)dx = 4n²+8n+3, which proves the equation ∫[x] √xpₙ₊₁(x)dx = 4n²-1 for all positive integers n.

Therefore, using the recurrence relation and mathematical induction, we have proven that 2n √xp₁₁(x)dx = 4n²-1.

learn more about recurrence relation here:

https://brainly.com/question/31384990

#SPJ11

The distance travelled by car before it comes to rest is 22.22m.

When the car brakes sharply and starts to skid, the friction between the tires and road causes the car to come to rest. The friction force between the tires and road is given to be 9000N. The mass of the car is 1000kg and its initial speed is 20m/s. We need to calculate the distance travelled by the car before it comes to rest. Using the formula v² = u² + 2as where, v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance, we can calculate the distance travelled by the car before it comes to rest. Since the final velocity is 0 (the car comes to rest), we can write the equation as 20² = 0² + 2(9000/1000) s Simplifying this equation, we get s = 22.22m. Therefore, the distance travelled by the car before it comes to rest is 22.22m.

Know more about distance travelled, here:

https://brainly.com/question/30344224

#SPJ11

The moment of inertia of the thin circular ring of mass m, uniform density and diameter d about an axis through its center and perpendicular to the plane of the ring is m*d²/4.

Moment of Inertia of a thin circular ring of mass m, uniform density and diameter d, about an axis through its center and perpendicular to the plane of the ring is  m*d²/4.The moment of inertia of a body with respect to a given axis is the sum of the products of all its constituent particles, and each particle's squared distance to the axis, with an appropriate constant. The moment of inertia is a measure of an object's resistance to changes in its rotational motion about a specific axis. For a thin circular ring, mass = m, diameter = d and uniform density = p where p is given by:m = p * πr²Density, p = mass / volumeSince the ring is thin, we can assume that the thickness of the ring is small. Therefore, the volume of the ring can be calculated as:Volume = πr²t (where t is the thickness of the ring)The mass of the ring is given as m. Therefore we can write:m = pVp = m / Vm = p * πr²tAs per the definition of the moment of inertia, we have:I = Σmr²For a thin circular ring, all the constituent particles are at a distance r from the axis of rotation. Therefore we can write:I = Σmr²= Σp * r² * (2πr * t)Here, 2πr * t is the length of the ring.For the given problem, we have a thin circular ring of mass m, uniform density and diameter d. Therefore, we can write the radius of the ring as d/2. Substituting this in the above equation, we get:I = Σp * r² * (2πr * t)= Σ(p * πr²t) * (2πr * t)= p * πt * Σr⁴= p * πt * [(d/2)⁴ + (-d/2)⁴]= p * πt * 2 * (d⁴/16)= m * d²/4 (Substituting for t, p and simplifying the above expression)Therefore, the moment of inertia of the thin circular ring of mass m, uniform density and diameter d about an axis through its center and perpendicular to the plane of the ring is m*d²/4.

To know more about moment of inertia visit :

brainly.com/question/31045808

#SPJ11

1. Newton's laws of motion are fundamental principles that describe the behavior of objects in motion. They were formulated by Sir Isaac Newton in the late 17th century and have had a profound impact on our understanding of physics.

2. Both momentum and kinetic energy are conserved in an elastic collision.

Momentum is conserved in an inelastic collision, but kinetic energy is not. The objects stick together or deform upon impact.

Newton's Laws of Motion:

a) Newton's First Law (Law of Inertia):

According to Newton's first law, unless acted upon by an external force, an object at rest will remain at rest and an object in motion will continue travelling at a constant velocity.

Equation: F = 0 (if the net force acting on an object is zero, its acceleration will be zero)

b) Newton's Second Law (Law of Acceleration):

According to Newton's second law, an object's mass has an inverse relationship to its acceleration, which is directly proportional to the net force acting on it.

Equation: F = ma (where F represents the net force, m is the mass of the object, and a is the acceleration produced)

c) Third Law of Newton (Law of Action and Reaction):

According to Newton's third law, every action has an equal and opposite response.

Equation: F₁ = -F₂ (the force exerted by object 1 on object 2 is equal in magnitude but opposite in direction to the force exerted by object 2 on object 1)

Elastic Collisions and Inelastic Collisions:

a) Elastic Collision:

In an elastic collision, two objects collide and bounce off each other, conserving both momentum and kinetic energy. This means that the total kinetic energy before and after the collision remains the same.

b) Inelastic Collision:

In an inelastic collision, two objects collide and stick together, or deform upon impact, resulting in a loss of kinetic energy. Momentum is still conserved in an inelastic collision, but the total kinetic energy before and after the collision is not conserved.

In an inelastic collision between two objects of masses m₁ and m₂, with initial velocities u₁ and u₂ respectively, the final velocity v can be calculated using the equation:

v = (m₁u₁ + m₂u₂)/(m₁ + m₂)

To know more about Motion, visit

brainly.com/question/28205978

#SPJ11

Tectonic plates are large segments of the Earth's crust that move slowly: (a) The tectonic plate moves 3.4 x 10⁻⁵ m in 1 second at this speed. (b) The speed of the tectonic plate is 1.08 km/million years.

(a) The tectonic plate moves approximately 3.4 x 10⁻⁵ m in 1 second at this speed.

To find the distance the tectonic plate moves in 1 second, we can simply multiply its speed by the duration of 1 second.

Given that the average speed of the plate is 3.4 cm/year, we need to convert centimeters to meters.

Since 1 cm is equal to 0.01 m, the plate's speed is 3.4 cm/year * 0.01 m/cm = 0.034 m/year.

Therefore, in 1 second, the plate moves 0.034 m/year * (1/365 days) * (1 day/24 hours) * (1 hour/3600 seconds) = approximately 3.4 x 10⁻⁵ m.

(b) The speed of the tectonic plate is approximately 1.08 km/million years.

To find the speed of the tectonic plate in kilometers per million years, we first convert the plate's speed from meters per year to kilometers per year.

Since 1 km is equal to 1000 m, the plate's speed is 0.034 m/year * (1 km/1000 m) = 0.000034 km/year.

Then, we can convert the speed to kilometers per million years by multiplying by the conversion factor (1 million years/1 year).

Therefore, the speed of the tectonic plate is approximately 0.000034 km/year * (1 million years/1 year) = approximately 1.08 km/million years.

To know more about tectonic plate, refer here:

https://brainly.com/question/16944828#

#SPJ11

Complete question

Tectonic plates are large segments of the Earth's crust that move slowly. Suppose that one such plate has an average speed of 3.4 cm/year. (a) What distance does it move in 1 s at this speed? (b) What is its speed in kilometers per million years?

The final velocity of the given mass having a 7kg weight will be 6.21 m/s.

Force is a physical phenomenon that modulates or tends to modulate the resting or moving state of an object as well as its shape. Newton is the SI unit of force.

Inertia is the ability of matter to remain stationary or move in the same direction without being affected by external forces.

It is a property of the body by which it resists any agent that attempts to cause it to move or, if moving, to alter the size or velocity of its motion. It is a non-active property and allows the body to do nothing except resist agents that are active, such as forces and torque.

Given, F(t) = 6t² - 3t + 1, mass = 7 kg, time = 3 seconds

[tex]\rm F(t) = 6t^{2} - 3t +1\\\rm m \frac{dv}{dt} = 6t^{2} - 3t +1\\\rm m\int\limits^v_0 {dv} \, = \int\limits^t_0 (6t^{2} - 3t +1) dt\\\rm mv = 6t^{3}/3 - 3 t^{2} /2 + t\\\rm m = 7 kg, t = 3 sec[/tex]

[tex]\rm mv= 2t^{3}- 3t^{2}/2 +t\\\rm v= 1/7[2\times 3^{3} - 3/2\times 3^{2} + 3\\\rm v= 1/7[54 - 13.5 + 3]\\\rm v= 6.21 m/s[/tex]

To learn more about velocity, refer to the link:

https://brainly.com/question/18084516

#SPJ4

When a bulb (the bulbs aren't the same) is added in parallel to a circuit with a single bulb, the resistance of the circuit decreases.

When bulbs are connected in parallel, they are each connected directly to the power source. This means that each bulb has its own individual pathway for the current to flow. In a parallel circuit, the total resistance is determined by the reciprocal of the sum of the reciprocals of the individual resistances.

Adding a bulb in parallel effectively adds another pathway for the current to flow. Since the total resistance is inversely proportional to the sum of the reciprocals of the individual resistances, adding another pathway with a lower resistance decreases the total resistance of the circuit.

In simpler terms, when the bulbs are added in parallel, the overall resistance decreases because the current has more paths to follow, and therefore encounters less overall resistance. This results in an increase in the total current flowing through the circuit.

Learn more about parallel circuit

brainly.com/question/14997346

#SPJ11

1. The charge on the hollow sphere is redistributed due to the presence of the metallic sphere inside. The charge on the surface of the hollow sphere is zero.

2. The potential difference between the hollow sphere and the internal sphere is zero.

Explanation to the above given short answers are written below,

1. According to Gauss's theorem, the electric field inside a closed conducting surface is zero. In this case, the metallic sphere inside the hollow sphere acts as a conductor.

As a result, the charges on the hollow sphere redistribute themselves such that the electric field inside becomes zero. Since the charge on the hollow sphere redistributes, the charge on its surface becomes zero.

This is because the charges on the surface of the hollow sphere move away from the metallic sphere and distribute themselves uniformly on the outer surface of the hollow sphere, resulting in a net charge of zero on the surface.

2. The potential difference between two points is defined as the work done per unit charge in moving a positive test charge from one point to another.

In this case, since the electric field inside the conducting surfaces is zero, no work is done in moving a test charge between the hollow sphere and the internal sphere. Therefore, the potential difference between these two surfaces is zero.

Since the potential difference is zero, it implies that the electric potential at the surface of the hollow sphere is the same as the electric potential at the surface of the internal metallic sphere.

To know more about "Gauss's theorem" refer here:

https://brainly.com/question/32715866#

#SPJ11

Among the given options, a neutron star is the smallest object in terms of size and volume. A neutron star is the collapsed core of a massive star after a supernova explosion.

Neutron star is incredibly dense, with a mass similar to that of the Sun packed into a sphere of only about 20 kilometers in diameter. Neutron stars are composed primarily of tightly packed neutrons and have extremely strong gravitational forces.

On the other hand, a red dwarf is a small and relatively cool star, typically less massive than the Sun. While red dwarfs are smaller than neutron stars, they are still much larger in size compared to neutron stars.

A white dwarf is the remnant of a low to medium mass star after it has exhausted its nuclear fuel. They are about the size of the Earth but have a mass comparable to the Sun. While a white dwarf is smaller in size than a red dwarf, it is still larger than a neutron star.

A G-type main-sequence star, like our Sun, is larger in both mass and size compared to a neutron star. These stars are in the prime of their lives and generate energy through nuclear fusion in their cores.

Lastly, the Earth, while smaller than all the other objects mentioned, is still significantly larger than a neutron star.

To read more about Neutron star, visit:

https://brainly.com/question/30114728

#SPJ11

The frequency of a record playing at 33 1/3 rpm is approximately 0.556 Hz, and the angular velocity is approximately 6.981 radians per second.

A record spinning at 33 1/3 rpm (revolutions per minute) refers to the number of complete rotations it makes in one minute. To find the frequency, we need to convert the rpm to Hz (hertz), which represents the number of complete cycles per second. To do this, we divide the rpm by 60, as there are 60 seconds in a minute.

Therefore, the frequency can be calculated as follows:

Frequency = 33 1/3 rpm / 60 seconds per minute

          = 0.556 Hz

This means that the record completes approximately 0.556 cycles (or revolutions) per second.

Angular velocity, on the other hand, refers to the rate at which an object rotates around a fixed axis. It is usually measured in radians per second (rad/s). To find the angular velocity, we need to convert the rpm to radians per second. Since one complete rotation (360 degrees) is equivalent to 2π radians, we can use this conversion factor:

Angular velocity = (33 1/3 rpm) * (2π radians per one complete rotation) / 60 seconds per minute

                            = 6.981 radians per second

This means that the record spins at an angular velocity of approximately 6.981 radians per second.

Learn more about angular velocity

brainly.com/question/30237820

#SPJ11

synovial fluid is an important component of joints. It has a watery consistency and it nourishes the articular cartilage. Ligaments are fibrous connective tissue that attach bones to other bones and provide stability and support to the joints.

The true statement about synovial fluid is that it nourishes the articular cartilage. Synovial fluid is a liquid that is found in the cavity of a joint. It is similar in composition to the blood plasma but it has fewer proteins. The fluid has a watery consistency.The synovial fluid lubricates the joints by providing nutrition to the joint tissues. It also contains phagocytic cells that help in the removal of debris. The fluid is also responsible for the exchange of gases and nutrients in the joint. It also acts as a shock absorber to protect the joint from injury.Ligaments are fibrous connective tissue that attach bones to other bones. They provide stability and support to the joints and prevent them from being overextended. Unlike tendons, ligaments do not contract or expand and they are not elastic. They are made up of bundles of collagen fibers that give them their strength and flexibility.In summary, synovial fluid is an important component of joints. It has a watery consistency and it nourishes the articular cartilage. Ligaments are fibrous connective tissue that attach bones to other bones and provide stability and support to the joints.

To know more about cartilage visit :

brainly.com/question/15455830

#SPJ11

Given, Power of the reading glasses (P) = 1.6 D. Hence, the focal length of the pair of reading glasses found on the rack in a pharmacy is 62.5 cm.

To find, Focal length (f)Formula used,

Power of the reading glasses (P) = 1/f

where, Power (P) is measured in diopters, Focal length (f) is measured in meters.

Solving the above equation for focal length (f), we get:

focal length (f) = 1/P

focal length (f) = 1/1.6 D

focal length (f) = 0.625 meters

focal length (f) = 62.5 cm

to know more about focal length visit:

https://brainly.com/question/31755962

#SPJ11

The speed of the large cart after the collision is 0.2925 m/s (in the direction of the small cart's initial motion).

In this question, we have to find the speed of the large cart after the collision. Given,

Mass of the small cart m₁ = 0.3 kg

Initial velocity of the small cart u₁ = 1.10 m/s

Final velocity of the small cart v₁ = -0.85 m/s (recoils in opposite direction)

Mass of the large cart m₂ = 2.00 kg

Initial velocity of the large cart u₂ = 0 (at rest)

Final velocity of the large cart v₂ = ?

We can find the final velocity of the large cart using the principle of conservation of momentum which states that the total momentum of a system of objects remains constant if no external forces act on the system. It can be represented as:

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

Substituting the given values, we get: 0.3 × 1.10 + 2.00 × 0 = 0.3 × (-0.85) + 2.00 × v₂

Simplifying, we get:

0.33 = -0.255 + 2.00v₂v₂= 0.2925 m/s

Therefore, the speed of the large cart after the collision is 0.2925 m/s (in the direction of the small cart's initial motion).

Learn more about momentum here:

https://brainly.com/question/32097662

#SPJ11

At a horizontal distance of 38 m from the bottom of a tree, the angle of elevation to the top of the tree is 27. The height of the tree is approximately 19.356 meters.

To find the height of the tree, we can use trigonometry and the concept of the tangent function. Let's denote the height of the tree as 'h'.

Given that the horizontal distance from the bottom of the tree to the observer is 38 m and the angle of elevation to the top of the tree is 27 degrees, we can set up the following trigonometric relationship:

tan(27°) = h/38

Now, we can solve for the height of the tree 'h' by rearranging the equation:

h = 38 * tan(27°)

Using a calculator or reference table, we can find the value of tan(27°) to be approximately 0.5095.

Substituting this value into the equation:

h = 38 * 0.5095 ≈ 19.356 m

Therefore, the height of the tree is approximately 19.356 meters.

For more such information on: distance

https://brainly.com/question/26550516

#SPJ8