The resulting solution made from the combination of 50 ml of 1.0 m lioh with 50 ml of 1.0 m hbr will be identical in all respects to 100 ml of?

Answers

Answer 1

The resulting solution made from the combination of 50 ml of 1.0 M LiOH with 50 ml of 1.0 M HBr will be identical in all respects to 100 ml of 0.5 M LiBr.

What is Molarity ?

Molarity (M) is defined as the number of moles of solutes dissolved in 1L of solution. Molarity is also known as Molar concentration. The S.I unit of Molarity is molar (M) or mol/L.

It is expressed as:

Molarity = [tex]\frac{\text{Number of moles}}{\text{Volume (in L)}}[/tex]

Number of moles = Molarity × Volume

Moles of LiOH = 1.0 × 0.05         [1 ml = 0.001 L]

                        = 0.05 mol

Moles of HBr = 1.0 × 0.05         [1 ml = 0.001 L]

                      = 0.05 mol

Now put the values in above formula we get

Molarity = [tex]\frac{\text{Number of moles}}{\text{Volume (in L)}}[/tex]

             = [tex]\frac{0.05}{0.1}[/tex]

             = 0.5 M LiBr

Thus from the above conclusion we can say that The resulting solution made from the combination of 50 ml of 1.0 M LiOH with 50 ml of 1.0 M HBr will be identical in all respects to 100 ml of 0.5 M LiBr.

Learn more about the Molarity here: https://brainly.com/question/14469428

#SPJ4


Related Questions

Jeff has 10 grams of water and 10 grams of vegetable oil in separate containers. both liquids have a temperature of 24°c. jeff heats both liquids over a flame for five minutes. when he’s finished, he discovers that the temperature of the oil increased more than the temperature of the water. what can jeff conclude from this experiment?

Answers

ANSWER: From this experiment, Jeff can conclude that the heat capacity of oil is lower than that of water which means that oil requires less energy per gram of liquid in order to change its temperature.

Enter your answer in the provided box. calculate the ph at 25°c of a 0. 11 m solution of a weak acid that has ka = 9. 2 × 10−6. ph =

Answers

The pH at 25°c of a 0. 11 m solution of a weak acid that has ka = 9. 2 × 10−6 is 3.

What is base dissociation constant?

The base dissociation constant is termed as Kb. Throughout a base split into ts constituent ions in water is determined by its base dissociation constant.

Kb = [H+] [A-]/[HA]

Now, let the concentration of [H+] = [A-] = x

Given,

Ka = 9.2 × 10−6.

Firstly we will calculate the value of the concentration of [H+]

pKa = x^2/(0.11-x)

9.2 × 10−6 = x^2/(0.11-x)

x^2 = 1.012 × 10−6

x = 1.002 × 10^−3.

The concentration of [H+] = [A-] = 1.002 × 10^−3.

Now, we will find pH as

pH = -log[H+]

pH = -log(1.002 × 10^−3)

pH = 3

Thus we calculated that the pH of the solution is 3.

learn more about pH :

https://brainly.com/question/12481995

#SPJ4

In a chemical equation, the number of atoms of a particular element that are present in a substance is indicated by a:________.

Answers

Answer:

subscript

Explanation:

H₂ O   means there are two hydrogen atoms and one oxygen atom

               the ' ₂ '  is a subscript

How many different substituents are required on a carbon atom for it to be chiral?

Answers

Four different substituents are required on a carbon atom for it to be chiral.

What is Chiral Carbons ?

The carbon atom which is attached with four different types of group of atoms or atoms is called Chiral carbon. Chiral molecules are non superimposable on their mirror images. Chiral carbon is also called asymmetric carbon.

Example:

[tex]Br - \underset{H} {\underset{|} {\overset{CH_3} {\overset{|}{C}}}} - Cl[/tex]

In the above example we can see that carbon atom has 4 different group attached with it that is Br, Cl, H, CH₃.

Thus from the above conclusion we can say that Four different substituents are required on a carbon atom for it to be chiral.

Learn more about the Chiral carbon here: https://brainly.com/question/1195366

#SPJ4

The reaction between an alcohol and an anomeric carbon of a carbohydrate forms a _____ bond.

Answers

glycosidic is the answer

The density of aluminum is 2.7 g/cm³. What is the density of aluminum in decagrams/m³?

Answers

Answer:

Density = 0.27 decagrams/cm³

Explanation:

From conversion tables, we know that;

1 g/cm³ = 0.1 decagrams/cm³

We are given;

Density of aluminium = 2.7 g/cm³

Thus;

Density = 2.7 * 0.1

Density = 0.27 decagrams/cm³

Answer:

270000 decagrams/m³

Explanation:

1.

Density=mass/Volume

=2.7g/1cm3

=(2.7/1000)/(1/1000000)

=2.7x1000

Density=2700kg/ m3

= 270000 decagrams/m³

2.

1000g=1kg

1g=1/1000kg

1cm3= ? m3

100cm=1m

1cm=1/100 m

1cm3=1/1000000 m3

Why does water have a very high boiling point?
Select one:
A. because it forms a three-dimensional pattern called a crystal lattice
B. because it has strong attractions that hold the water molecules together
C. because it is a molecular compound
D. because it does not conduct an electric current

Answers

Answer:

B

Explanation:

Hydrogen bonding holds the water molecules together

A gaseous mixture containing 32.00 g n2 and 16.00 g ne is placed into an 4.00 l vessel at 0.00 °C. What is the pressure of the mixture?

Answers

The pressure of the mixture can be found out adding the Partial Pressure of the gas.

Partial pressure of gas is the pressure if it alone occupied the entire volume of original mixture.

Moles = given mass / molar mass

Given,

Mass of Nitrogen = 32g

Molar Mass of Nitrogen = 28g

Mass of Neon = 16g

Molar Mass of Neon = 20g

Volume of gas = 4L

Temperature of vessel = 0°C = 273K

Partial Pressure of nitrogen = P₁

Partial Pressure of neon = P₂

Moles of nitrogen, n₁= 32/28 = 1.14

Moles of neon, n₂= 16/20 = 0.8

Using Ideal gas equation for Nitrogen,

∴ P₁V = n₁RT

⇒ P₁ (1) = 1.14 × 0.082 × 273

⇒ P₁ = 25.52atm

Using Ideal gas equation for Neon,

∴ P₂V = n₂RT

⇒ P₂ (1) = 0.8 × 0.082 × 273

⇒ P₂ = 17.9 atm

Total pressure of the mixture can be found out by adding the partial pressures of both the gases.

Total pressure P = P₁  + P₂  

P = 25.52 + 17.9 atm

P = 43.42 atm

Hence, total pressure of the mixture is 43.42atm

Learn more about Partial Pressure here, https://brainly.com/question/13199169

#SPJ4

Draw the major product formed in the reaction involving an acid anhydride dissolved in alcohol.

Answers

What is the product of reaction of acid anhydride dissolved in alcohol ?

A symmetrical acid anhydride will undergo a reaction with an alcohol to give an ester and a carboxylic acid. An asymmetrical acid anhydride will undergo a reaction with an alcohol to give two esters and two carboxylic acids.

Alcohols and anhydrides react to produce esters as the main product and a carboxylate as a byproduct. To neutralise any generated acid, the process is often conducted with a base, such as NaOH or pyridine.

Learn more about Acid anhydride and alcohol reaction here:

https://brainly.com/question/7260193

#SPJ4

What are the three forms of water found on Earth?

Answers

Water can occur in three states: solid (ice), liquid or gas (vapor).

Answer:

By form if you mean states then it's,

Water is found on Earth as drinking water (liquid), water vapour (gas) and ice (solid).

Explain why doesn’t the total pressure increase when more gas is added to the chamber?

Answers

Pressure is inversely proportional to volume. Therefore, the effect of pressure change is opposite to the effect of volume change. So when more gas is added to the chamber the total pressure of the chamber doesn't increase.

What are the different relations between pressure and volume?As the volume changes, the concentrations and partial pressures of both reactants and products change. As the volume decreases, the reaction shifts to the reaction side with fewer gas particles.As the volume increases, the reaction shifts to the side of the reaction containing more gas particles. As the pressure increases, the equilibrium shifts towards reactions with fewer moles of gas. As the pressure decreases, the equilibrium shifts to the side of the reaction with higher moles of gas.Moreover, the pressure change in the system due to the addition of the inert gas is not limited to this.

To know more about Pressure and Volume visit:
https://brainly.com/question/5018408

#SPJ4

At what volume of added acid is the phph calculated by working an equilibrium problem based on the initial concentration and kbkb of the weak base?

Answers

In an acid-base neutralization reaction, the equilibrium reaction would be between a weak base and its conjugate strong base. So, this must be the basis of the volume of added base.

What is pH ?

pH is used to measure whether the substance is acidic, basic or neutral and the range is 0 - 14.

What is Neutralization Reaction ?

Neutralization reaction is a chemical reaction in which an acid and a base react quantitatively with together.

Neutralization reaction equation:

Acid + Base → Salt + Water

Thus from the above conclusion we can say that In an acid-base neutralization reaction, the equilibrium reaction would be between a weak base and its conjugate strong base. So, this must be the basis of the volume of added base.

Learn more about the Neutralization reaction here: https://brainly.com/question/23008798

#SPJ4

A coin collector has a bag of 50 pennies. What is the percent abundance of the post-1982 pennies? ASAP ANSWER PLS.

Answers

The percent abundance of the post-1982 pennies is 56%.

What is percent abundance?

Percent abundance is the percentage amount of all naturally occurring isotopes of an element.

Percent abundance of the post-1982 pennies

The percent abundance of the post-1982 pennies is calculated as follows;

percent abundance = number of  post-1982 pennies / total number of pennies x 100%

percent abundance =  (28) / (50) x 100%

percent abundance =  56%

Thus, the percent abundance of the post-1982 pennies is 56%.

Learn more about percent abundance here: https://brainly.com/question/6844925

#SPJ1

Answer:

FOR PRE 44

Explanation:

22/50X100=44

Who invented the clay triangle?

Answers

A pipeclay triangle is a piece of laboratory apparatus that is used to support a crucible being heated by a Bunsen burner or other heat source. It is made of wires strung in an equilateral triangle on which are strung hollow ceramic, normally fire clay, tubes. The triangle is usually supported on a tripod or iron ring.

A chemistry laboratory device is a clay triangle to support the crucible when heated to high temperatures. It consists of a three-sided triangle frame made of clay or ceramic material.

The heat can pass through the open sides and is evenly distributed throughout the crucible. Although the soil triangle is a common and commonly used piece of laboratory equipment, it is difficult to ascertain who actually invented it.

The design of the clay triangle probably changed over time as a result of diverse contributions from scientists and chemists working on building laboratory equipment. The soil triangle may not have had a clear beginning, as is the case with many scientific instruments, but it is considered an evolution in laboratory technology overall.

Learn more about laboratory equipment, here:

https://brainly.com/question/34600654

#SPJ7

A student compares the boiling point of substances having different intermolecular forces. which dependent variable did the student most likely use? compounds made of either ions, atoms, or molecules type of source used to heat up the substances type of container used for the substances boiling points of various substances

Answers

A student compares the boiling point of substances having different intermolecular forces. Boiling points of various substances is the dependent variable that student most likely use.

Does the nature of intermolecular forces present in different substance affect their boiling points?

The boiling point of a substance is proportional to the strength of its intermolecular forces, the higher the boiling point, the stronger the intermolecular forces. We can compare the strengths of intermolecular forces by comparing the boiling points of different substances.

What properties are affected by intermolecular forces?

Intermolecular forces are measured by boiling points.

Intermolecular forces increase as bond polarization increases.

Ionic > hydrogen bonding > dipole dipole > dispersion is the order of the strength of intermolecular forces (and thus their impact on boiling points).

How can you determine strong and weak intermolecular forces?

Substances with strong intermolecular forces are very attracted to one another and are held together tightly. These substances require a great deal of energy to separate, whereas substances with weak intermolecular forces are held together very loosely and have weak interactions.

Learn more about intermolecular forces:

https://brainly.com/question/13479228

#SPJ4

Hi I need help and I am willing to give brainliest
Can you help me find the percent yield of SiO2 given the equation of SiCl4 + O2 → SiO2 + Cl2

the starting amount for SiCl4 is 150g and O2 at 200g. the actual yield for SiO2 is 49.2 g.
Thank you for any help

Answers

1. The first step is to convert your given masses into moles. This way, you can see which reactant is in excess and which one is limiting. A good flow of thought would be: kilograms of SiO2/Carbon→ grams SiO2/Carbon→moles SiO2/Carbon.

2. Repeat this step for the carbon reactant.

3. By comparison, we can tell that the carbon reactant is in excess, which means that the SiO2 reactant is limiting. Because of this, we’ll use the amount of SiO2 to find our percent yield. There’s only so much SiO2 that can react with the carbon.

4. You can now calculate the actual and theoretical yields. The theoretical yield is larger than the actual yield because it does not have physical interactions like loss of energy to the environment and friction to interfere with the reaction.

5. Now compare your two values of actual and theoretical. The formula for percent mass is [(Actual yield)/(Theoretical yield)]*100%. Our final answer for this question is the percent yield of the reaction is 90.8% We can interpret this as 90.8% of the SiO2 reacting will produce solid silicon.

Hope this helps!!

What enone product would you expect to obtain from intramolecular aldol condensation of 5-oxohexanal?

Answers

Cyclohex-2-en-1-one product would be obtain from intramolecular aldol condensation of 5-oxohexanal.

What is Intramolecular Aldol Condensation ?

The condensation reaction in which two ketone groups and aldehyde group in the same molecule are called Intramolecular Aldol Condensation. Intramolecular Aldol Condensation occurs in five or six membered α, β- unsaturated aldehyde or ketones are formed.

Thus from the above conclusion we can say that Cyclohex-2-en-1-one product would be obtain from intramolecular aldol condensation of 5-oxohexanal.

Learn more about the Aldol Condensation here: https://brainly.com/question/14260386

#SPJ4

Which carbon atom(s) of pyruvate is(are) first converted to carbon dioxide by pyruvate dehydrogenase complex?

Answers

The carbon atom(s) of pyruvate is(are) first converted to carbon dioxide by pyruvate dehydrogenase complex is the second number of carbon of pyruvate goes to oxidation and convert it to CO2 in Krebs cycle.

what is Krebs cycle ?

Krebs cycle is also known as citric acid cycle it is the conversion of sugar to the direct energy in the form of ATP which further goes to mitochondria as it is the power house of the human cell.

Pyruvate molecule release second number carbon from the chain and undergoes oxidation to form the CO2.

Therefore, second number carbon atom will converts to carbon dioxide.

Learn more about Krebs cycle , here:

https://brainly.com/question/14241294

#SPJ4

10 mL of 2(M) NaOH solution is added to 200 mL of 0.5 (M) of NaOH solution. What is the final concentration?​

Answers

Hello its me Sanya yadav

The molar absorption coefficient of a substance dissolved in benzene is measured to be 712 L mol-1 cm-1 at 403 nm. Calculate what fraction of the incident light intensity of that wavelength passes through 2.67 mm of a solution of concentration 3.17 mmol/L.

Answers

According to Beer-Lambert's law, the solution allows for the passage of 3/4 of the incoming light intensity at that wavelength.

Calculation:

According to Beer-Lambert's law,

A = ∈ * C * l

A = log(I₀/I)

T = I₀/I

log (I₀/I) = ∈ * C * l

Here,

A= absorbance of the solution

l= path length= 2.67 mm = 0.267 cm (∵ 1mm = 0.1 cm)

T= transmittance

C= concentration of the given solution = 3.17mmol/L = 3.17* 10⁻³ mol/L

I= transmitted light

I₀= incident light

∈= molar absorption coefficient = 712 L mol⁻¹cm⁻¹

A = ∈ * C * l= 712 * 3.17 * 0.267 *10⁻³ = 602.63* 10⁻³ =0.602

T = [tex]10^{-A}[/tex] = [tex]10^{-0.602}[/tex] = 0.25

so, the percentage of transmittance = 0.25 * 100 = 25 %

Therefore, the intensity reduction will be equal to the original radiation intensity less the transmittance.

Give the initial intensity = 100

So, the reduction = 100 - 25 = 75.

Hence the fraction of incident light intencity= 75/100 = 3/4

Therefore the answer is 3/4.

Learn more about Beer-Lambert's law here:

https://brainly.com/question/8831959

#SPJ1

What is the compound number (enter both the number and letter without spaces e. g. 1d, 2h) for trans-cinnamic acid?

Answers

99 140-10-3.

99 140-10-3 is the compound number for trans-cinnamic acid.

What do you mean by compound numbers?A subscript is the little number that appears to the right of an element's symbol. That figure represents how many atoms of that element are contained in the complex.What is the purpose of trans-Cinnamic acid?The creation of trans-cinnamic acid's methyl, ethyl, and benzyl esters is its primary usage, while it is also used to make flavors, colors, and medications. These esters play a significant role in perfume composition. The sweetener aspartame is a precursor of the acid.

What other name would you give trans-Cinnamic acid?

Phenolacrylic acid

The class of chemical compounds known as cinnamic acids includes trans-cinnamic acid, often referred to as (e)-cinnamic acid or phenylacrylic acid. These are organic aromatic compounds that generate 3-phenylprop-2-enoic acid from benzene and a carboxylic acid group.

To learn more about trans-cinnamic acid visit:

https://brainly.com/question/7213641

#SPJ4

Structures of compounds people use every day are shown. From which group of unsaturated hydrocarbons is each derived? 2 carbons are double bonded together, with H bonded to the left, and C H 2 bonded below left, above right, and below right. In a segment of an ongoing chain, 3 iterations of this structure are bonded together by single bonds from the bottom right C H 2 of one structure to the bottom left C H 2 of the next.

Answers

The group of unsaturated hydrocarbons which 2 carbons are double bonded together, with H bonded to the left, and C H 2 bonded below left, above right, and below right is derived from Alkenes

What are organic compounds?

Organic compounds are compounds which contains carbon and hydrogen

Some few classes or organic compounds or hydrocarbons are as follows:

AlkanesAlkenesAlkynesAlkanolsAlkanoic acidKetonesEsters

So therefore, the group of unsaturated hydrocarbons which 2 carbons are double bonded together, with H bonded to the left, and C H 2 bonded below left, above right, and below right is derived from Alkenes

Learn more about organic compounds:

https://brainly.com/question/1594044

#SPJ1

Answer:

The answer is A.) Alkene

All the answers in that section are:

Alkene

Aromatic Hydrocarbon

Alkene

Alkyne

Explanation:

Here's the picture as proof. Hope it helps!

The smallest particle of an element that retains all of the properties of that element is called a(n) ______.

Answers

Answer:

Atom

Explanation:

That describes an ATOM

what is the importance of metal reactivity series​

Answers

Answer:

The reactivity series allows us to predict correctly how metals will react. Another importance is that so we can use displacement. We can spot a more reactive metal allowing us to displace a less reactive metal from a compound or an equation.

Hope this helped! Marking me brainliest will be very helpful!

Please comment below if you require more assistance from me! :)

Importance of Metal Reactivity Series are:

Metal Reactivity Series are used in Displacement reaction.It is used in the reaction between water and metals.In the reaction between metals and acids.

What are metal reactivity series?

Metal reactivity series is a chart of listing the metals in the order of decreasing reactivity.

As in Displacement reaction less reactive metal is displaced by more reactive metal. By metal reactivity series we came to know which metal is displaced by another metal.When the metals from Potassium and Calcium react with cold water             it will release Hydrogen gas.

See the below reaction:

K(s)        +            [tex]H_2O[/tex]   →           KOH(aq)              +                  1/2 [tex]H_2[/tex] (g)

Potassium      water              Potassium Hydroxide                Hydrogen

Metals like Lead and others which are more reactive than Lead can react with HCl and [tex]H_2SO_4[/tex] to form salts. We can predict the reaction by reactivity series.

Lets see the reaction between Lead with Hydrochloric acid and Sulphuric acid.

Pb (s)      + 2HCl (aq)           →              [tex]PbCl_2[/tex] (aq)           +       [tex]H_2[/tex] (g)

Lead        Hydrochloric acid          Lead chloride                  Hydrogen

Pb (s)      +   [tex]2H_2SO_4[/tex]             →     [tex]PbSO_4[/tex]              +   [tex]SO_2[/tex]                   +   [tex]H_2O[/tex]

Lead         Sulphuric acid            Lead Sulphate      Sulphur dioxide    water

To learn more about Metal reactivity series:

brainly.com/question/17469010

#SPJ2

 

2. Calculate the number of moles represented by the following masses.

a. 2.00 × 102 g of silver
b. 37.1 g of silicon dioxide, SiO2

40 POINTS!!!!!!!!!!!!

Answers

a. There are 1.85 moles in 2.00 × 10² g of silver (Ag).

b. There are 0.618 moles in 37.1 g of silicon dioxide (SiO₂)

What is the molar mass?

The molar mass is the mass in grams of 1 mole of particles, that is, the mass in grams of 6.02 × 10²³ particles. The units are g/mol.

We want to calculate the number of moles represented by different masses of different substances. In each case, the conversion factor between mass and moles is the molar mass.

a. 2.00 × 10² g of silver (Ag)

The molar mass of silver is 107.87 g/mol.

2.00 × 10² g × (1 mol/107.87 g) = 1.85 mol

b. 37.1 g of silicon dioxide (SiO₂)

The molar mass of silicon dioxide is 60.08 g/mol.

37.1 g × (1 mol/60.08 g) = 0.618 mol

a. There are 1.85 moles in 2.00 × 10² g of silver (Ag).

b. There are 0.618 moles in 37.1 g of silicon dioxide (SiO₂)

Learn more about molar mass here: https://brainly.com/question/21334167

#SPJ1

2.5 moles of a gas is enclosed in a 87.2 L cylinder with a moveable piston at 425 K and 1.0 atm. An additional 2.5 moles of gas is added to the system and it is cooled to 273 K. The cylinder changes volume to maintain the pressure. What is the volume in the final system?

Answers

Answer:

112 L

Explanation:

Since the pressure is being held constant, you can use the following variation of the Ideal Gas Law to find the new volume:

[tex]\frac{V_1}{T_1N_1}=\frac{V_2}{T_2N_2}[/tex]

In this equation, "V₁", "T₁", and "N₁" represent the initial volume, temperature, and moles. "V₂", "T₂", and "N₂" represent the final volume, temperature, and moles.

V₁ = 87.2 L                             V₂ = ? L

T₁ = 425 K                              T₂ = 273 K

N₁ = 2.5 moles                       N₂ = 2.5 + 2.5 = 5.0 moles

[tex]\frac{V_1}{T_1N_1}=\frac{V_2}{T_2N_2}[/tex]                                                   <----- Formula

[tex]\frac{87.2 L}{(425K)(2.5 moles)}=\frac{V_2}{(273 K)(5.0 moles)}[/tex]                    <----- Insert values

[tex]\frac{87.2 L}{1062.5}=\frac{V_2}{1365}[/tex]                                                    <----- Simplify denominators

[tex]0.08207=\frac{V_2}{1365}[/tex]                                                 <----- Simplify left side

[tex]112L={V_2}[/tex]                                                        <----- Multiply both sides by 1365

The reaction of hydrogen bromide(g) with chlorine(g) to form hydrogen chloride(g) and bromine(g) proceeds as follows:
2HBr(g) + Cl2(g) -->2HCl(g) + Br2(g)
When 23.5 g HBr(g) reacts with sufficient Cl2(g), 11.8 kJ is evolved.

Calculate the value of △,H for the chemical equation given.

Answers

Answer:
The enthalpy of reaction per mole of HBr for this
reaction = ArH =-40.62 kJ/mole.
Explanation:
2HBr(g) + C12(g) > 2HC|(g) + Br2 (g)
When 23.9 g HBr(g) reacts with sufficient C12(g),
12.0 kJ of heat is evolved, calculate the value of
Ar for the chemical reaction.
Note that ArH is the enthalpy per mole for the
reaction.
Molar mass of HBr (g) = 80.91 g/mol.
Hence, 1 mole of HBr = 80.91 g
23.9 g of HBr led to the reaction giving off 12.0
kJ of heat
80.91 g of HBr will lead to the evolution of (80.91
× 12/23.9) = 40.62 kJ heat is given off.
Hence, 40.62 kJ of heat is given off per 80.91 g
of HBr.
This directly translates to that 40.62 kJ of heat is
given off per 1 mole of HBr
Hence, the heat given off per mole of HBr for
this reaction is 40.62 kJ/mole.
But since the reaction liberates heat, it means
the reaction is exothermic and the enthalpy
change for the reaction (AHrxn) is negative.

-40.62

What are the differences between grasses and legumes? advantages and disadvantages of each

Answers

The differences between grasses and legumes are,

The grasses tend to have more digestible fiber than legume plants.Legumes have more protein , energy and micronutrient due to their abundant leaves as compare to grasses.The nutrient composition is an obvious and major difference between the two plants.

The advantage and disadvantage of grasses are given below.

Advantage:

Grasses helps to keep air clean, trap carbon dioxide , reduce erosion from storm water runoff , improve soil , decreases noise pollution and reduce temperature.

Disadvantage:

It is necessary to cut grasses regularly.Sometime grasses harmful to the environment . Likewise rainwater runoff from  lawns can carry pesticides and fertilizer into river , lake ,streams and ocean via the sewer system.

The advantage and disadvantage of legumes are given below.

Advantage:

The legumes supply nutrients essential to our body which supports our health.

Disadvantage:

It lower persistence than grass under grazing It has high risk of livestock bloat It is difficult to conserve as silage or hay.

learn about legumes

https://brainly.com/question/19900764

#SPJ4

Consider the tetrahedral intermediate and the two leaving groups, methoxide and amide anion. does this reaction favor reactants or products?

Answers

The reaction of tetrahedral intermediate and the two leaving groups, methoxide and amide anion favour product.

What is leaving group?

A leaving group is a group of atoms or an atom which is able to break away from a molecule as a stable species or with a lone pair, breaking the bond between the molecule and itself.

What is intermediate?

A stage is come before forming product. This stage is termed as transition stage and the reactant at this stage is termed as intermediate.

According to Le Châtelier's Principle, a reactions always tend towards the equilibrium, the reaction produces more products from the excess reactant, that's why it causing the system to shift to the left which allows the system to reach equilibrium.

Due to this reason, this reaction shift towards product.

Thus, we concluded that the reaction of tetrahedral intermediate and the two leaving groups, methoxide and amide anion favour product.

learn more about equilibrium:

https://brainly.com/question/12920261

#SPJ4

Could someone explain this sentence for me ?​

Answers

Answer:

Explanation:

to put this plainly after putting strong electrolytes in water they dissolve to nothing but ions they give you an example and definition of a strong electrolyte I suggest you read those and see if you come up with what I gave you they also tell you that not all strong electrolytes dissolve as strongly as others that are in the example.

Other Questions
A fundamental reason for a country's development of advanced and specialized factors of production is often its:______. In terms of interpersonal judgment, ones ________ has a significant effect on the opportunities he or she faces in his or her life. The mean of a normally distributed data set is 110, and the standard deviation is 15. a) Use the Empirical Rule to find the probability that a randomly-selected data value is greater than 95. b) Use the Empirical Rule to find the probability that a randomly-selected data value is greater than 125. Which antidepressant class is most closely linked with anticholinergic side effects? Margaret, a professional social worker with the local mental health center, volunteers on weekends at the adult day center in her community. to which role does her community service commitment relate? Inexperienced employees may include ________ as ________, resulting in an overstatement of assets. When a beverage maker came out with a new drink and priced it at half price for a month to attract buyers they were using? 2. What is the length of the hypotenuse k? Lee la frase y escoge la forma correcta del verbo ir que completa la frase.Read the sentence and then choose the option with the correct form of the verb ir.Laura limpiar la cocina despus de que se ___ los invitados.A. vanB. vayanC. irnD. irian 30,098 in standard form full working pliz The baseball coach is 70 inches tall. How tall is the child?There is a picture that has the child's head slightly below the coach's shoulder. In 2016, the CDC estimated the mean weight of U.S. women over the age of 20 years old was 168.5 pounds with a standard deviation of 68 pounds.1. What is the expected mean for a sample of 150 women?2. What is the standard deviation of the mean for a sample of 150 women?3. What is the probability of 150 women having a sample mean below 160 pounds?4. What is the probability of 150 women having a sample mean above 175 pounds?5. What is the probability of 200 women having a sample mean below 160 pounds? Note the change in sample size.6. What is the probability of 200 women having a sample mean above 175 pounds? 3. What kind of triangle is represented by the triangle shown below?IsoscelesRightO EquilateralScalene PLEASE HELP!! ill give brainliest A. ||B. C. neither they are skew lines Employees covered by the overtime provisions of the Fair Labor Standards Act are labeled a. nonexempt employees. b. salaried workers. c. protected workers. d. exempt employees. What index is used to measure the average prices paid by a typical family? what is the answer to this? Read the following excerpt from Jonathan Swift's "A Modest Proposal":I do therefore humbly offer it to public consideration, that of the hundred and twenty thousand children, already computed, twenty thousand may be reserved for breed, whereof only one fourth part to be males; which is more than we allow to sheep, black cattle, or swine; and my reason is, that these children are seldom the fruits of marriage, a circumstance not much regarded by our savages, therefore, one male will be sufficient to serve four females. That the remaining hundred thousand may, at a year old, be offered in sale to the persons of quality and fortune, through the kingdom, always advising the mother to let them suck plentifully in the last month, so as to render them plump, and fat for a good table. A child will make two dishes at an entertainment for friends, and when the family dines alone, the fore or hind quarter will make a reasonable dish, and seasoned with a little pepper or salt, will be very good boiled on the fourth day, especially in winter.I have reckoned upon a medium that a child just born will weigh 12 pounds, and in a solar year, if tolerably nursed, encreaseth to 28 pounds.I grant this food will be somewhat dear, and therefore very proper for landlords, who, as they have already devoured most of the parents, seem to have the best title to the children.How does the author's word choice in this excerpt imply a message other than the one explicitly stated? Analyze specific phrases within the excerpt and explain how they help the writing to function as satire. Support your answer with evidence from this excerpt and from your general knowledge of "A Modest Proposal." Please help i will mark the brainliest The vertices of a composite figure are given. Find the area of the figure.G(-5, -1), H(-5, 1), I(2, 4), J(5, -1), K(1, -3) Consider the function f(x) = 3x + 1 and the graph of the function g(x) shown below.A coordinate plane linear graph function shows a line intersecting Y-axis at minus 5 and X-axis at 1.5.The graph g(x) is the graph of f(x) translated units , and g(x) =