136.8 g of salt would remain if 2kg of seawater from the Dead Sea is evaporated.
Given that the salinity in the Dead Sea is 342 ‰ and nothing but bacteria can live in it.
We know that Salinity (S) is defined as the amount of salt in grams dissolved in 1000 grams (1 kg) of water. Its unit is parts per thousand (ppt) or ‰.
S = (Mass of salt / Mass of salt + Mass of water) × 1000
From the given information, Salinity in the Dead Sea = 342 ‰
That is,342 = (Mass of salt / Mass of salt + Mass of water) × 1000
This implies Mass of salt + Mass of water = 1000
We are supposed to find the mass of salt left when 2kg of seawater from the Dead Sea is evaporated.
So the mass of water left in 2kg of seawater is = 2 kg = 2000 grams and the mass of salt left will be
Mass of salt = 342/1000 × 2000= 684/5= 136.8 g
Hence the mass of salt that would remain when 2kg of seawater from the Dead Sea is evaporated is 136.8 g.
Therefore, the detailed answer is, 136.8 g of salt would remain if 2kg of seawater from the Dead Sea is evaporated.
Learn more about Mass of salt
brainly.com/question/14467077
#SPJ11
Vector B lies in the first quadrant, has a magnitude of 55, and forms a 74 degree angle with respect to the x-axis. What is the x-component and y-component of vector B? Bx= 15: By= 53 Bx= -15: By=-53 Bx= 53: By= 15 Bx= -53: By -15 D u
The x-component of vector B is approximately 15 and the y-component is approximately 53.
To find the x-component and y-component of vector B, we can use trigonometric functions based on the given magnitude and angle.
Magnitude of vector B = 55
Angle with respect to the x-axis = 74 degrees
To find the x-component (Bx), we can use the formula:
Bx = magnitude × cos(angle)
Bx = 55 × cos(74 degrees)
Calculating this expression:
Bx = 55 × 0.276 (rounded to three decimal places)
Bx ≈ 15.180
To find the y-component (By), we can use the formula:
By = magnitude × sin(angle)
By = 55 × sin(74 degrees)
Calculating this expression:
By = 55 × 0.961 (rounded to three decimal places)
By ≈ 52.855
Therefore, the x-component of vector B is approximately 15.180 and the y-component is approximately 52.855.
The x-component of vector B is approximately 15.180, round-off of which will give Bx = 15, and the y-component is approximately 52.855, round-off of which will give By = 53.
To know more about Vector, visit
brainly.com/question/27854247
#SPJ11
Suppose that the root-mean-square velocity Urms of water molecules (molecular mass is equal to 18.0 g/mol) in a flame is found to be 1350 m/s. What temperature T does this represent? The Boltzmann con
The temperature (T) represented by the given root-mean-square velocity (Uᵣₘₛ) of water molecules is approximately 2.23 × 10⁵ Kelvin.
The root-mean-square velocity (Uᵣₘₛ) of gas molecules can be related to temperature (T) using the Boltzmann constant (k) and the molar mass (M) of the gas. The formula is as follows:
Uᵣₘₛ = √((3kT) / M)
We are given that the molecular mass of water (H₂O) is 18.0 g/mol, and the root-mean-square velocity (Uᵣₘₛ) is 1350 m/s.
First, we need to convert the molecular mass of water to kg/mol:
M = 18.0 g/mol = 0.018 kg/mol
Rearranging the formula, we have:
T = (Uᵣₘₛ² * M) / (3k)
Now, we substitute the given values into the formula:
T = (1350 m/s)² * (0.018 kg/mol) / (3 * 1.38 × 10⁻²³ J/K)
Calculating the value:
T ≈ 2.23 × 10⁵ K
To learn more about root-mean-square velocity refer here:
https://brainly.com/question/2020688#
#SPJ11
A lens appears greenish yellow when white light reflects from it (X=570nm is the most intense wavelength. What minimum thickness I of a film with index of refraction Nfilm -1.25 is used on a glass len
The minimum thickness of the film with a refractive index of 1.25 is approximately 58.1 nm.
When white light reflects from a film, interference occurs due to the difference in path length traveled by the light waves. In order for a greenish-yellow color to appear, the path difference between the reflected waves should be equal to the wavelength of the most intense color, which is 570 nm.
The path difference (Δd) can be calculated using the formula:
Δd = (2 * n * d) / λ
where n is the refractive index of the film (Nfilm - 1.25), d is the thickness of the film, and λ is the wavelength of light (570 nm).
To find the minimum thickness (I) of the film, we need to consider that the path difference should be equal to half the wavelength (λ/2) to create constructive interference for the greenish-yellow color.
Δd = (2 * n * d) / λ = λ/2
Rearranging the formula, we can solve for the minimum thickness:
d = (λ^2) / (4 * n)
Substituting the values, we get:
d = (570 nm)^2 / (4 * 1.25)
Calculating this, we find:
d ≈ 58.1 nm
Therefore, the minimum thickness of the film is approximately 58.1 nm.
The minimum thickness of the film with a refractive index of 1.25, in order for a greenish-yellow color to appear, is approximately 58.1 nm.
To know more about thickness , visit:
https://brainly.com/question/27872530
#SPJ11
please respond quickly
(a) Explain in your own words what is meant by active and passive sensors. Give an example of each type of sensor. [4 marks] (b) A thermometer is regarded as a first-order instrument where a time dela
(a) Active and passive sensors have a crucial role to play in the world of sensor technology. (b) A thermometer is regarded as a first-order instrument where a time delay is inherent, thereby making the device a passive sensor.
Active sensors transmit energy into the environment, then detect and measure the energy that reflects back. Passive sensors only detect incoming energy that is emitted from the environment. An example of an active sensor is radar, which transmits radio waves and listens for echoes back to detect the location of objects. An example of a passive sensor is a thermometer that reads the temperature without actively transmitting energy.
(b) A thermometer is regarded as a first-order instrument where a time delay is inherent, thereby making the device a passive sensor. A first-order instrument has a linear response, and it typically lacks precision. Passive sensors like thermometers rely on natural energy sources to measure temperature, such as the thermal energy emitted by an object. They only detect energy that comes to them and do not transmit energy like an active sensor would.
Detached sensors distinguish energy transmitted or reflected from an item, and incorporate various kinds of radiometers and spectrometers. The majority of passive systems utilized in remote sensing work in the microwave, visible, thermal infrared, and infrared regions of the electromagnetic spectrum.
Know more about passive sensors, here:
https://brainly.com/question/32616536
#SPJ11
if a chain of 50 identical short springs linked end-to-end has a stiffness of 460 n/m, what is the stiffness of one short spring?
A spring’s stiffness is determined by the material it is made of, the size and shape of the spring, and the number of coils on it. The stiffness is defined as the force required to extend the spring by a unit length. It is calculated by dividing the change in force by the change in length. Therefore, the stiffness of one short spring is 9.2 N/m.
Spring constant or spring stiffness is a measure of the force required to deform a spring by one unit length. The spring constant of a chain of 50 identical short springs linked end-to-end is 460 n/m. We need to determine the stiffness of one short spring in this case. We can use the formula for stiffness (spring constant) to calculate it. The stiffness of one short spring is calculated as follows:
Let k be the stiffness of one short spring.
Then, the stiffness of 50 short springs connected in series is given as follows:
K = k₁ + k₂ + k₃ + … + kn For 50
identical springs connected in series
:k = K/50
Therefore, the stiffness of one short spring is:
k = 460/50k = 9.2 n/m
Therefore, the stiffness of one short spring is 9.2 N/m.
Another way of solving it is using the formula for stiffness (spring constant).
The stiffness of a spring is equal to the force required to extend the spring by a unit length.
The formula for the spring constant k is given by:
k = F/x
Where, F is the force applied, x is the displacement of the spring.
Assuming that the displacement of the chain of 50 identical short springs connected in series is x, then the force required to deform the chain of 50 identical short springs is F.
The stiffness of one short spring is given as:
k₁ = F/x₁
where k₁ is the spring constant of one short spring.
The stiffness of 50 short springs connected in series is given as follows:
k = F/x
where k is the spring constant of the 50 short springs connected in series.
Now, since 50 identical short springs are connected in series,
k = 50k₁
Therefore,
k₁ = k/50
Substituting the value of k = 460 N/m,
we get:
k₁ = 460/50
k₁ = 9.2 N/m
to know more about spring constant visit:
https://brainly.com/question/29975736
#SPJ11
For a record playing at 33 1/3 rpm, find the frequency and the angular velocity.
The frequency of a record playing at 33 1/3 rpm is approximately 0.556 Hz, and the angular velocity is approximately 6.981 radians per second.
A record spinning at 33 1/3 rpm (revolutions per minute) refers to the number of complete rotations it makes in one minute. To find the frequency, we need to convert the rpm to Hz (hertz), which represents the number of complete cycles per second. To do this, we divide the rpm by 60, as there are 60 seconds in a minute.
Therefore, the frequency can be calculated as follows:
Frequency = 33 1/3 rpm / 60 seconds per minute
= 0.556 Hz
This means that the record completes approximately 0.556 cycles (or revolutions) per second.
Angular velocity, on the other hand, refers to the rate at which an object rotates around a fixed axis. It is usually measured in radians per second (rad/s). To find the angular velocity, we need to convert the rpm to radians per second. Since one complete rotation (360 degrees) is equivalent to 2π radians, we can use this conversion factor:
Angular velocity = (33 1/3 rpm) * (2π radians per one complete rotation) / 60 seconds per minute
= 6.981 radians per second
This means that the record spins at an angular velocity of approximately 6.981 radians per second.
Learn more about angular velocity
brainly.com/question/30237820
#SPJ11
Q4) Suppose a force, F(t) = 6t² - 3t +1, acts on an 7 kg mass for three seconds. If the mass starts from a state of rest, what will be its final velocity? Foren (NI
Force (N) 120 100 80 60 40 20 2 F
The final velocity of the given mass having a 7kg weight will be 6.21 m/s.
Force is a physical phenomenon that modulates or tends to modulate the resting or moving state of an object as well as its shape. Newton is the SI unit of force.
Inertia is the ability of matter to remain stationary or move in the same direction without being affected by external forces.
It is a property of the body by which it resists any agent that attempts to cause it to move or, if moving, to alter the size or velocity of its motion. It is a non-active property and allows the body to do nothing except resist agents that are active, such as forces and torque.
Given, F(t) = 6t² - 3t + 1, mass = 7 kg, time = 3 seconds
[tex]\rm F(t) = 6t^{2} - 3t +1\\\rm m \frac{dv}{dt} = 6t^{2} - 3t +1\\\rm m\int\limits^v_0 {dv} \, = \int\limits^t_0 (6t^{2} - 3t +1) dt\\\rm mv = 6t^{3}/3 - 3 t^{2} /2 + t\\\rm m = 7 kg, t = 3 sec[/tex]
[tex]\rm mv= 2t^{3}- 3t^{2}/2 +t\\\rm v= 1/7[2\times 3^{3} - 3/2\times 3^{2} + 3\\\rm v= 1/7[54 - 13.5 + 3]\\\rm v= 6.21 m/s[/tex]
To learn more about velocity, refer to the link:
https://brainly.com/question/18084516
#SPJ4
the object is placed at a distance in front of the mirror which is twice the focal length, i.e. do=2f. enter an expression for the distance between the image and the mirror.
The distance between the image and the mirror can be expressed as di = -2f. The negative sign indicates that the image is formed on the same side as the object, which confirms that it is a real image.
When an object is placed at a distance in front of a mirror that is twice the focal length (do = 2f), the image formed is a real and inverted image. According to the mirror formula, 1/do + 1/di = 1/f, where do is the object distance, di is the image distance, and f is the focal length of the mirror. By substituting the given values, we get 1/2f + 1/di = 1/f. Solving this equation, we find di = -2f. The negative sign indicates that the image is formed on the same side as the object, which confirms that it is a real image.
To learn more about distance click here
https://brainly.com/question/13034462
#SPJ11
A 1.50kg snowball is shot upward at an angle of 34.0° to the horizontal with an initial speed of 20.0m/s. a. What is its initial kinetic energy? b. By how much does the gravitational potential energy
a. The initial kinetic energy of the snowball is 300 Joules.
b. The initial gravitational potential energy is zero.
a. To calculate the initial kinetic energy of the snowball, we can use the formula:
Kinetic Energy (KE) = (1/2) * mass * velocity^2
Given:
Mass (m) = 1.50 kg
Velocity (v) = 20.0 m/s
Substituting these values into the formula, we get:
KE = (1/2) * 1.50 kg * (20.0 m/s)^2
= 0.5 * 1.50 kg * 400 m^2/s^2
= 300 J
Therefore, the initial kinetic energy of the snowball is 300 Joules.
b. The gravitational potential energy (PE) of an object is given by the formula:
PE = mass * gravity * height
Since the snowball is shot upward, its initial height is zero. Therefore, the initial gravitational potential energy is also zero.
Therefore,
a. The initial kinetic energy of the snowball is 300 Joules.
b. The initial gravitational potential energy is zero.
To know more about energy visit:
https://brainly.com/question/13881533
#SPJ11
A square frame has sides that measure 1.85 m when it is at rest. What is the size of the sides of the new shape when it moves parallel to one of its diagonal with a speed of 0.70c? I know the length turns to 1.868408414 and that the final answer is 1.607. I need help understanding the geometry. Please show the geometry.
The sides of the new shape when it moves parallel to one of its diagonals with a speed of 0.70c will be 1.7939 m.
The length of a square frame with sides of 1.85 m when at rest will be computed while it moves parallel to one of its diagonals with a speed of 0.70c. The size of the sides of the new shape is sought.What is the length of the square frame?The length of the square frame is equal to the size of its sides and is given as 1.85 m.What is the speed of light (c)?The speed of light is approximately 3.0 × 108 m/s.
How do you calculate the length of an object when moving at a constant speed?When an object is moving at a constant velocity, time can be defined as distance divided by speed. To find the new size of the square frame when it moves parallel to one of its diagonals with a speed of 0.70c, we must first determine the length of the square frame when it moves at this speed.
The length of an object moving at a constant speed is defined as:L = L0 / √ (1 - v^2/c^2)where L0 is the length of the object when it is stationary, v is the velocity of the object, and c is the speed of light in a vacuum.L = (1.85) / √ (1 - (0.70c)^2/c^2)L = (1.85) / √ (1 - 0.49)L = (1.85) / √ (0.51)L = 2.5357 m
To get the length of the new shape, we'll need to divide the length of the square frame by the square root of two since it's moving parallel to one of its diagonals.The length of the new shape is:L' = 2.5357 / √2L' = 1.7939 m
Therefore, the sides of the new shape when it moves parallel to one of its diagonals with a speed of 0.70c will be 1.7939 m.
To learn more about sides visit;
https://brainly.com/question/31139338
#SPJ11
what is the maximum torque he could exert with a force of this magnitude?
Maximum torque that could be exerted with a force of this magnitude is equal to the product of the distance between the point of rotation and the point of application of force, and the force. This value will be in Nm (Newton meters).
To calculate the maximum torque that could be exerted with a force of a particular magnitude, we need to know the distance between the point of rotation and the point of application of force.
The formula for torque is given as follows: T= r * F * sinθ whereT= torque (Nm)r= distance from the axis or pivot point to the point of application of force (m)F= force (N)
θ= the angle between the force vector and the line connecting the point of application of force and the axis of rotation (degrees)
To find the maximum torque that could be exerted with a force of a particular magnitude, we need to use the formula above, and take the sine of the angle to be 1 (which is the maximum value it can take),
thus:T= r * F * 1T= r * F
Therefore, the maximum torque that can be exerted with a force of this magnitude is equal to the product of the distance between the point of rotation and the point of application of force, and the force.
This value will be in Nm (Newton meters).
Maximum torque that could be exerted with a force of this magnitude is equal to the product of the distance between the point of rotation and the point of application of force, and the force. This value will be in Nm (Newton meters).
Learn more about force
brainly.com/question/30507236
#SPJ11
A balloon has a volume of 3.00 liters at 24.0°C. The balloon is heated to 48.0°C. Calculate the new volume of the balloon. A. 3.00 L B. 3.24 L C. 2.78 L D. 1.50 L E. 6.00 L
A balloon has an initial volume of 3.00 liters at 24.0°C. The balloon is heated to 48.0°C. The new volume of the balloon is 3.24 liters. The correct answer is option B, 3.24 L.
At constant pressure, the volume of a gas is directly proportional to its absolute temperature. That is, when the temperature of a gas increases, the volume of the gas increases, and when the temperature of the gas decreases, the volume of the gas decreases.
This relationship is expressed mathematically by the following equation: V2 = (T2/T1)V1 where V1 is the initial volume of the balloon and T1 is the initial temperature of the balloon, V2 is the final volume of the balloon and T2 is the final temperature of the balloon. Now, substituting the values into the equation we get
V2 = (48.0 + 273.15) / (24.0 + 273.15) × 3.00V2
321.15 / 297.15 × 3.00V2
3.24 L.
Therefore, the new volume of the balloon is 3.24 liters.
Learn more about pressure here:
https://brainly.com/question/14143912
#SPJ11
The hydrogen atom has the principal quantum number n=4, then the
number of states that the electron can occupy is?
The number of states that the electron can occupy in a hydrogen atom with the principal quantum number n = 4 is 16.
In a hydrogen atom, the number of states that an electron can occupy is determined by the principal quantum number (n). The principal quantum number defines the energy levels or shells of the atom.
The number of states that an electron can occupy in a given energy level (shell) is equal to 2n^2, where n is the principal quantum number.
n = 4
Substituting the value of n into the formula, we get:
Number of states = 2n^2 = 2 * 4^2 = 2 * 16 = 32
However, it's important to note that for the hydrogen atom, the number of states is limited by the number of allowed orbitals within the energy level. In the case of the principal quantum number n = 4, there are only 16 allowed orbitals. Each orbital can accommodate a maximum of 2 electrons (due to the Pauli exclusion principle).
Therefore, The number of states that the electron can occupy in a hydrogen atom with the principal quantum number n = 4 is 16.
To know more about Electron, visit
brainly.com/question/860094
#SPJ11
When a bulb (the bulbs aren't the same) is added in parallel to a circuit with a single bulb, the resistance of the circuit Oincreases Odecreases Oremains the same Odoubles Otriples Submit
When a bulb (the bulbs aren't the same) is added in parallel to a circuit with a single bulb, the resistance of the circuit decreases.
When bulbs are connected in parallel, they are each connected directly to the power source. This means that each bulb has its own individual pathway for the current to flow. In a parallel circuit, the total resistance is determined by the reciprocal of the sum of the reciprocals of the individual resistances.
Adding a bulb in parallel effectively adds another pathway for the current to flow. Since the total resistance is inversely proportional to the sum of the reciprocals of the individual resistances, adding another pathway with a lower resistance decreases the total resistance of the circuit.
In simpler terms, when the bulbs are added in parallel, the overall resistance decreases because the current has more paths to follow, and therefore encounters less overall resistance. This results in an increase in the total current flowing through the circuit.
Learn more about parallel circuit
brainly.com/question/14997346
#SPJ11
2. Explanation of nouns (10 marks each, 30 marks in total) 1. Newton's law. (There are 3 of them. Write both definition and related equation) 2. Elastic collisions and Inelastic collision. (Write both
1. Newton's laws of motion are fundamental principles that describe the behavior of objects in motion. They were formulated by Sir Isaac Newton in the late 17th century and have had a profound impact on our understanding of physics.
2. Both momentum and kinetic energy are conserved in an elastic collision.
Momentum is conserved in an inelastic collision, but kinetic energy is not. The objects stick together or deform upon impact.
Newton's Laws of Motion:
a) Newton's First Law (Law of Inertia):
According to Newton's first law, unless acted upon by an external force, an object at rest will remain at rest and an object in motion will continue travelling at a constant velocity.
Equation: F = 0 (if the net force acting on an object is zero, its acceleration will be zero)
b) Newton's Second Law (Law of Acceleration):
According to Newton's second law, an object's mass has an inverse relationship to its acceleration, which is directly proportional to the net force acting on it.
Equation: F = ma (where F represents the net force, m is the mass of the object, and a is the acceleration produced)
c) Third Law of Newton (Law of Action and Reaction):
According to Newton's third law, every action has an equal and opposite response.
Equation: F₁ = -F₂ (the force exerted by object 1 on object 2 is equal in magnitude but opposite in direction to the force exerted by object 2 on object 1)
Elastic Collisions and Inelastic Collisions:
a) Elastic Collision:
In an elastic collision, two objects collide and bounce off each other, conserving both momentum and kinetic energy. This means that the total kinetic energy before and after the collision remains the same.
b) Inelastic Collision:
In an inelastic collision, two objects collide and stick together, or deform upon impact, resulting in a loss of kinetic energy. Momentum is still conserved in an inelastic collision, but the total kinetic energy before and after the collision is not conserved.
In an inelastic collision between two objects of masses m₁ and m₂, with initial velocities u₁ and u₂ respectively, the final velocity v can be calculated using the equation:
v = (m₁u₁ + m₂u₂)/(m₁ + m₂)
To know more about Motion, visit
brainly.com/question/28205978
#SPJ11
What is the timbre, voices, time, and form of Duke Ellington's
"East St. Louis Toodle-oo. The music can be found at the following
link: ?v=-_Y0cJ-aEbY
The timbre, voices, time, and form of the song cannot be determined without listening to the music or accessing the provided link.
What is the timbre, voices, time, and form of Duke Ellington's "East St. Louis Toodle-oo"?However, I can provide a general description of the elements you mentioned.
"Timbre" refers to the unique quality of sound produced by different instruments or voices. The specific timbre of "East St. Louis Toodle-oo" would require listening to the music itself.
The song may feature a variety of instruments and possibly vocal performances, but the details cannot be determined without accessing the provided link.
Regarding "time" and "form," these aspects refer to the structure and arrangement of the music. Again, without direct access to the specific song, it is not possible to provide a detailed analysis of its time signature, tempo, or form.
To fully explore the timbre, voices, time, and form of Duke Ellington's "East St. Louis Toodle-oo," I recommend listening to the song directly or consulting a musical analysis from a reliable source.
Learn more about timbre
brainly.com/question/29790908
#SPJ11
What is the relationship between poetntial energy, kinetic energy, and total energy?
The relationship between potential energy, kinetic energy, and total energy can be explained by the principle of conservation of energy. According to this principle, energy cannot be created or destroyed, but it can be transformed from one form to another.
When an object is at rest, it has potential energy due to its position or state. This potential energy can be converted into kinetic energy when the object starts moving. Kinetic energy is the energy of motion and is proportional to the mass of the object and the square of its velocity. When the object comes to a stop, its kinetic energy is converted back into potential energy, which is stored in its position or state. The total energy of the object is the sum of its potential energy and kinetic energy, and this total energy is conserved throughout the motion of the object.
In other words, as an object falls from a height, it gains kinetic energy and loses potential energy. The total energy of the object remains constant, however, as the gain in kinetic energy is equal to the loss in potential energy. At the bottom of the fall, the object has converted all of its potential energy into kinetic energy. If the object collides with another object, some of its kinetic energy may be converted into potential energy, as the object deforms or changes shape. The total energy of the system remains constant, however, as the gain in potential energy is equal to the loss in kinetic energy. In summary, potential energy, kinetic energy, and total energy are all related through the principle of conservation of energy. This principle states that energy cannot be created or destroyed, but it can be transformed from one form to another. Therefore, as an object moves, its potential energy can be converted into kinetic energy and back again, but the total energy of the object remains constant.
To know more about kinetic energy visit :-
https://brainly.com/question/999862
#SPJ11
is the opposition to ac current flow caused by a capacitor.
No, the opposition to AC current flow is not caused by a capacitor. Rather, it is caused by the inductance of a coil or the resistance of a resistor.
The opposition to AC current flow is called impedance. Capacitors, like resistors and inductors, contribute to the total impedance of a circuit. However, the impedance of a capacitor does not cause opposition to AC current flow, rather it acts to store and release energy in the circuit. A capacitor opposes the flow of direct current (DC), however, when it is placed in a circuit with AC, it charges and discharges as the current alternates. This results in a phase shift between the voltage and current, causing a reactive component to the circuit impedance which is called capacitive reactance (Xc).
This is the property of the capacitor to store electrical energy in an electric field, and when the electric field is discharged, it releases that energy into the circuit. Capacitance is an important factor in many types of circuits such as filters, power supplies, and timing circuits. In conclusion, capacitors do not cause opposition to AC current flow, rather they contribute to the total impedance of a circuit and play an important role in many electrical circuits.
Learn more about impedance at :
https://brainly.com/question/31369031
#SPJ11
Yes, the opposition to AC current flow is caused by a capacitor. It is also known as capacitance opposition or capacitive reactance. Capacitance is the ability of a capacitor to store electrical charge, and it opposes a change in voltage.
When an alternating current (AC) passes through a capacitor, the charges present on the plates will be equal and opposite in direction. This means that the capacitor will oppose any change in voltage, resulting in a phase difference between the voltage and the current. When a capacitor is connected to an AC source, the current will be initially high, and the voltage will be low because the capacitor opposes any change in voltage.
As the AC voltage reaches its peak, the current decreases to zero because the capacitor is fully charged. When the voltage starts to decrease, the capacitor discharges, and the current starts to flow in the opposite direction. The opposition of a capacitor to AC current flow is measured in units called ohms and is known as capacitive reactance.
The formula for calculating capacitive reactance is: Xc = 1/(2πfC), Where: Xc = Capacitive reactance f = Frequency of the AC source C = Capacitance of the capacitor. So, in summary, the opposition to AC current flow is caused by a capacitor because of its ability to store electrical charge. This opposition is known as capacitive reactance and is measured in ohms.
To know more about Capacitance, refer
https://brainly.com/question/21851402
#SPJ11
A car mass 1000kg is travelling along a straight horizontal road at a speed of 20m/s when it brakes sharply then skids. Friction brings the car to rest. If the friction force between the tires and road is 9000N. Calculate the distance travelled by car befor it comes to rest 211m a O 1.11m bO 25.5m 22.22m.
The distance travelled by car before it comes to rest is 22.22m.
When the car brakes sharply and starts to skid, the friction between the tires and road causes the car to come to rest. The friction force between the tires and road is given to be 9000N. The mass of the car is 1000kg and its initial speed is 20m/s. We need to calculate the distance travelled by the car before it comes to rest. Using the formula v² = u² + 2as where, v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance, we can calculate the distance travelled by the car before it comes to rest. Since the final velocity is 0 (the car comes to rest), we can write the equation as 20² = 0² + 2(9000/1000) s Simplifying this equation, we get s = 22.22m. Therefore, the distance travelled by the car before it comes to rest is 22.22m.
Know more about distance travelled, here:
https://brainly.com/question/30344224
#SPJ11
what is the moment of inertia of a thin circular ring of mass mm, uniform density, and diameter dd, about an axis through its center and perpendicular to the plane of the ring, as shown in the figure?
The moment of inertia of the thin circular ring of mass m, uniform density and diameter d about an axis through its center and perpendicular to the plane of the ring is m*d²/4.
Moment of Inertia of a thin circular ring of mass m, uniform density and diameter d, about an axis through its center and perpendicular to the plane of the ring is m*d²/4.The moment of inertia of a body with respect to a given axis is the sum of the products of all its constituent particles, and each particle's squared distance to the axis, with an appropriate constant. The moment of inertia is a measure of an object's resistance to changes in its rotational motion about a specific axis. For a thin circular ring, mass = m, diameter = d and uniform density = p where p is given by:m = p * πr²Density, p = mass / volumeSince the ring is thin, we can assume that the thickness of the ring is small. Therefore, the volume of the ring can be calculated as:Volume = πr²t (where t is the thickness of the ring)The mass of the ring is given as m. Therefore we can write:m = pVp = m / Vm = p * πr²tAs per the definition of the moment of inertia, we have:I = Σmr²For a thin circular ring, all the constituent particles are at a distance r from the axis of rotation. Therefore we can write:I = Σmr²= Σp * r² * (2πr * t)Here, 2πr * t is the length of the ring.For the given problem, we have a thin circular ring of mass m, uniform density and diameter d. Therefore, we can write the radius of the ring as d/2. Substituting this in the above equation, we get:I = Σp * r² * (2πr * t)= Σ(p * πr²t) * (2πr * t)= p * πt * Σr⁴= p * πt * [(d/2)⁴ + (-d/2)⁴]= p * πt * 2 * (d⁴/16)= m * d²/4 (Substituting for t, p and simplifying the above expression)Therefore, the moment of inertia of the thin circular ring of mass m, uniform density and diameter d about an axis through its center and perpendicular to the plane of the ring is m*d²/4.
To know more about moment of inertia visit :
brainly.com/question/31045808
#SPJ11
newton invented which math tool to understand motion and gravity true or false?
Newton invented calculus as a math tool to understand motion and gravity, the given statement is true because Sir Isaac Newton was a mathematician and scientist, and he made significant contributions to the fields of physics and mathematics.
Newton's most significant contribution to mathematics was his development of calculus, which is a mathematical system that deals with continuously changing variables. Newton used calculus to develop his laws of motion and gravity. He showed that the same laws of motion apply to everything in the universe, from the smallest particles to the largest galaxies. He was the first person to propose that gravity is a universal force that acts on all matter.
Newton's laws of motion and gravity laid the foundation for modern physics and made it possible to explain the behavior of the universe in mathematical terms. His work was groundbreaking, and it continues to be influential in the fields of mathematics, physics, and engineering today. Therefore, the statement that Newton invented calculus as a math tool to understand motion and gravity is true.
Learn more about gravity at :
https://brainly.com/question/1832350
#SPJ11
Newton invented calculus, which was a mathematical tool that aided in understanding motion and gravity. The statement given is true.
Sir Isaac Newton is a famous English physicist and mathematician whose work had a significant impact on physics and mathematics, and he is recognized for his laws of motion, his work on optics, and his contribution to the development of calculus.
Newton's laws of motion, which are used to describe how objects move in space, were a major breakthrough in the field of physics. They are still used today to study the motion of objects in space. Additionally, Newton made significant contributions to the study of optics, the study of light and how it behaves, and the development of calculus, a mathematical tool that aided in understanding motion and gravity.
Newton developed calculus to solve the problem of instantaneous rates of change, which could not be solved by the existing methods of the time. Calculus is now an essential part of higher mathematics and has had an enormous impact on science and technology. It is used in a wide range of fields, including engineering, physics, economics, and statistics.
To know more about motion, refer
https://brainly.com/question/26083484
#SPJ11
At a horizontal distance of 38 m from the bottom of a tree, the angle of elevation to the top of the tree is 27. How tall is the tree? m
At a horizontal distance of 38 m from the bottom of a tree, the angle of elevation to the top of the tree is 27. The height of the tree is approximately 19.356 meters.
To find the height of the tree, we can use trigonometry and the concept of the tangent function. Let's denote the height of the tree as 'h'.
Given that the horizontal distance from the bottom of the tree to the observer is 38 m and the angle of elevation to the top of the tree is 27 degrees, we can set up the following trigonometric relationship:
tan(27°) = h/38
Now, we can solve for the height of the tree 'h' by rearranging the equation:
h = 38 * tan(27°)
Using a calculator or reference table, we can find the value of tan(27°) to be approximately 0.5095.
Substituting this value into the equation:
h = 38 * 0.5095 ≈ 19.356 m
Therefore, the height of the tree is approximately 19.356 meters.
For more such information on: distance
https://brainly.com/question/26550516
#SPJ8
for an arbitrary invertible transformation t(x) = ax, denote the lengths of the semi-major and semi-minor axes of t(ohm) by a and b, respectively. what is the relationship between a, b, and det(a)?
For an arbitrary invertible transformation t(x) = ax, where x and a are vectors or matrices, and a is an invertible matrix, the lengths of the semi-major and semi-minor axes of t(Ω) are determined by the singular values of a.
Let's denote the singular values of a as σ1, σ2, ..., σn, where n is the dimension of the vectors or matrices. The singular values of a are the square roots of the eigenvalues of the matrix product a^T * a, where a^T is the transpose of a.The relationship between the lengths of the semi-major and semi-minor axes, a and b respectively, and the determinant of a, det(a), is given by a = σ1 * sqrt(det(a))
b = σ2 * sqrt(det(a)) Here, σ1 represents the largest singular value of a, and σ2 represents the second largest singular value. The determinant of a, det(a), is a measure of the scaling or volume change induced by the transformation.
To know more about volume visit :
https://brainly.com/question/28058531
#SPJ11
A metallic sphere with radius R = 4cm and charge q = 9*10° C is placed inside a hollow metallic sphere with internal radius R₁ = 6 cm and external radius R₂ = 8cm and total positive charge Q =9*10° C. 1. Using Gauss theorem, what happens to the charge on the hollow sphere? What will be the charge on its surface? 2. Calculate the potential difference between the hallow sphere and the internal sphere.
1. The charge on the hollow sphere is redistributed due to the presence of the metallic sphere inside. The charge on the surface of the hollow sphere is zero.
2. The potential difference between the hollow sphere and the internal sphere is zero.
Explanation to the above given short answers are written below,
1. According to Gauss's theorem, the electric field inside a closed conducting surface is zero. In this case, the metallic sphere inside the hollow sphere acts as a conductor.
As a result, the charges on the hollow sphere redistribute themselves such that the electric field inside becomes zero. Since the charge on the hollow sphere redistributes, the charge on its surface becomes zero.
This is because the charges on the surface of the hollow sphere move away from the metallic sphere and distribute themselves uniformly on the outer surface of the hollow sphere, resulting in a net charge of zero on the surface.
2. The potential difference between two points is defined as the work done per unit charge in moving a positive test charge from one point to another.
In this case, since the electric field inside the conducting surfaces is zero, no work is done in moving a test charge between the hollow sphere and the internal sphere. Therefore, the potential difference between these two surfaces is zero.
Since the potential difference is zero, it implies that the electric potential at the surface of the hollow sphere is the same as the electric potential at the surface of the internal metallic sphere.
To know more about "Gauss's theorem" refer here:
https://brainly.com/question/32715866#
#SPJ11
determine the time it takes to achieve an angular velocity of ω = 198 rad/s . when t = 0, θ = 1 rad .
To determine the time it takes to achieve an angular velocity of ω = 198 rad/s, given that at t = 0, θ = 1 rad, we can use the equation of angular motion.
The equation that relates angular displacement, angular velocity, and time is θ = ω₀t + (1/2)αt², where θ is the angular displacement, ω₀ is the initial angular velocity, t is the time, α is the angular acceleration, and t² denotes t squared.
In this case, we are given that ω₀ = 0 since the initial angular velocity is not provided. Assuming there is no angular acceleration mentioned, we can simplify the equation to θ = (1/2)αt².
Rearranging the equation to solve for time, we have t = sqrt((2θ) / α).
Substituting the given values, θ = 1 rad and ω = 198 rad/s, we need additional information on the angular acceleration (α) to calculate the time it takes to achieve the given angular velocity.
To know more about angular acceleration, click here:
https://brainly.com/question/30237820
#SPJ11
) Determine the internal shear and moment in the beam as a function of x throughout the beam. Then, draw the shear and moment diagrams for the beam.
The internal shear and moment in a beam vary along its length, and they are typically represented by diagrams called shear and moment diagrams. These diagrams can be used to determine the maximum shear and moment that occur in the beam, which are important parameters for designing the beam.
A beam is a structural element that is capable of withstanding loads primarily through axial compression and tension forces. Beams are usually horizontally placed in bridges and buildings to support the loads of the structures. In order to design the structural element, it is important to determine the internal shear and moment in the beam as a function of x throughout the beam.
The internal shear and moment of a beam are fundamental concepts that help engineers to design and analyze a structural element. The internal shear and moment in a beam vary along its length, and they are typically represented by diagrams called shear and moment diagrams.
The shear diagram represents the shear force at a point along the beam, while the moment diagram represents the bending moment at a point along the beam. The internal shear and moment diagrams are used to determine the maximum shear and moment that occur in the beam, which are important parameters for designing the beam.In order to determine the internal shear and moment in the beam as a function of x throughout the beam, we can use the equations of equilibrium.
To know more about moment visit :
https://brainly.com/question/32087705
#SPJ11
Find the mass of a ball of radius 6 if the mass density of the sphere is proportional to the square of the distance from its center. (Give an exact answer. Use symbolic notation and fractions where ne
The mass of a ball of radius 6 if the mass density of the sphere is proportional to the square of the distance from its center. The mass of the ball is (7776 / 5) times the constant of proportionality, k.
The mass of the ball, we need to integrate the mass density over the volume of the sphere.
Let's denote the mass density as ρ and the distance from the center as r. According to the given information, the mass density is proportional to the square of the distance, so we can express it as ρ = k * r², where k is the constant of proportionality.
The volume element of a sphere in spherical coordinates is given by dV = r² * sin(θ) * dr * dθ * dϕ, where θ represents the polar angle and ϕ represents the azimuthal angle.
In this case, since the density depends only on the radial distance, we can ignore the angular components and integrate only over the radial direction.
The limits of integration for r will be from 0 to the radius of the sphere, which is given as 6.
The mass of the ball, M, can be calculated as the integral of the density over the volume of the sphere:
M = ∫ρ * dV = ∫(k * r²) * (r² * sin(θ) * dr * dθ * dϕ)
Since we are only integrating over the radial direction, we can simplify the above expression as:
M = k * ∫(r⁴ * sin(θ)) * dr
Now, let's perform the integration:
M = k * ∫(r⁴ * sin(θ)) * dr
= k * ∫r⁴ * dr
= k * [r⁵ / 5] + C
Evaluating the integral within the limits of integration (0 to 6):
M = k * [(6⁵ / 5) - (0⁵ / 5)]
= k * (7776 / 5)
= (7776 / 5) * k
Since we are looking for the exact answer, we'll keep the expression as it is.
To learn more about constant of proportionality refer here:
https://brainly.com/question/17793140#
#SPJ11
Here are three displacements, each in meters: d₁ = 5.0+ 6.13 - 2.1k, d₂ = - 1.0+ 2.0 + 3.0k, and d3 = 4.01 +3.0 +2.0k. What is 7 = d₁ - d₂ + d3 ((a), (b) and (c) for i, and components respecti
Here are three displacements, each in meters: d₁ = 5.0+ 6.13 - 2.1k, d₂ = - 1.0+ 2.0 + 3.0k, and d3 = 4.01 +3.0 +2.0k. The displacement 7 = (7ₓ, 7ᵧ, 7ₖ) = (-5.22, 8.0, -3.1) meters.
To find the displacement 7 = d₁ - d₂ + d₃, we need to subtract the components of d₂ from d₁ and then add the components of d₃. Let's calculate each component separately.
For the x-component (i), we have:
d₁ₓ = 5.0 - 1.0 + 4.01 = 8.01
d₂ₓ = 6.13 + 2.0 + 3.0 = 11.13
d₃ₓ = -2.1
So, 7ₓ = d₁ₓ - d₂ₓ + d₃ₓ = 8.01 - 11.13 - 2.1 = -5.22
For the y-component (j), we have:
d₁ᵧ = 0 + 2.0 + 3.0 = 5.0
d₂ᵧ = 0
d₃ᵧ = 3.0
So, 7ᵧ = d₁ᵧ - d₂ᵧ + d₃ᵧ = 5.0 - 0 + 3.0 = 8.0
For the z-component (k), we have:
d₁ₖ = -2.1
d₂ₖ = 3.0
d₃ₖ = 2.0
So, 7ₖ = d₁ₖ - d₂ₖ + d₃ₖ = -2.1 - 3.0 + 2.0 = -3.1
To know more about "Displacements" refer here:
https://brainly.com/question/17693792#
#SPJ11
a small, 300 g cart is moving at 1.10 m/s on a frictionless track when it collides with a larger, 2.00 kg cart at rest. after the collision, the small cart recoils at 0.850 m/s .
what is the speed of the large cart after bthe collision?
The speed of the large cart after the collision is 0.2925 m/s (in the direction of the small cart's initial motion).
In this question, we have to find the speed of the large cart after the collision. Given,
Mass of the small cart m₁ = 0.3 kg
Initial velocity of the small cart u₁ = 1.10 m/s
Final velocity of the small cart v₁ = -0.85 m/s (recoils in opposite direction)
Mass of the large cart m₂ = 2.00 kg
Initial velocity of the large cart u₂ = 0 (at rest)
Final velocity of the large cart v₂ = ?
We can find the final velocity of the large cart using the principle of conservation of momentum which states that the total momentum of a system of objects remains constant if no external forces act on the system. It can be represented as:
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
Substituting the given values, we get: 0.3 × 1.10 + 2.00 × 0 = 0.3 × (-0.85) + 2.00 × v₂
Simplifying, we get:
0.33 = -0.255 + 2.00v₂v₂= 0.2925 m/s
Therefore, the speed of the large cart after the collision is 0.2925 m/s (in the direction of the small cart's initial motion).
Learn more about momentum here:
https://brainly.com/question/32097662
#SPJ11
When unbalanced forces act on an object, the resultant will be
...
Larger than any of the individual forces
Smaller than the largest force
zero
equal to the largest vector
Clear selection
When unbalanced forces act on an object, the resultant will be larger than any of the individual forces.
When multiple unbalanced forces act on an object, their combined effect is known as the resultant force. The resultant force determines the object's acceleration and its motion.
To calculate the resultant force, you would add the individual forces together vectorially. However, in this case, no specific forces or calculations are provided. Instead, we can focus on understanding the concept of the resultant force.
When unbalanced forces act on an object, it means that the forces are not balanced and do not cancel each other out. In this situation, the object will experience a net force in a particular direction.
The resultant force is the vector sum of all the individual forces acting on the object. Since the forces are unbalanced, the resultant force will be larger than any of the individual forces. It represents the combined effect of all the forces, causing the object to accelerate or change its motion.
When unbalanced forces act on an object, the resultant force will be larger than any of the individual forces. This occurs because the forces are not balanced and have a cumulative effect on the object's motion.
To know more about forces visit:
https://brainly.com/question/30464630
#SPJ11
