CuCl2(s) would be more soluble as the solvent temperature rose.
What happens to a solid substance's solubility when the temperature rises?The average kinetic of the solutes increases along with the solution's temperature. As a result, the molecules have a lower ability to bind together and dissolve more easily. Therefore, when temperature rises, solid states become more soluble.
Do temperature fluctuations affect solubility?Temperature affects a given solute's potential to dissolve in some kind of a particular solvent. The permeability of liquids and particles rises with temperature. Similar to liquids, gases become less soluble as temperature rises.Dissolution rate of the solute will consequently increase as temperature rises.
To know more about solubility visit:
https://brainly.com/question/28170449
#SPJ4
how many milliliters of 12.0 m hcl should be added to 5.00 x 102 ml of 0.100 m na2so3 to produce a ph 7.00 buffer solution. for h2so3 ka1
The balanced chemical equation for the reaction between HCl and Na2SO3 is:
Na2SO3 + 2HCl → 2NaCl + H2SO4
The pH of a buffer solution is determined by the ratio of the weak acid (H2SO3) to its conjugate base (HSO3-). To determine the amount of HCl needed to produce a pH of 7.00, the concentration of H2SO3 and HSO3- must be calculated.
Since the reaction goes to completion, the amount of HCl added will determine the amount of H2SO4 produced, which will then dissociate to H2SO3 and HSO3-. The initial concentration of H2SO3 will be equal to the initial concentration of HCl, and the concentration of HSO3- will be equal to the amount of H2SO4 produced divided by the volume of the solution.
We can use the initial concentration of HCl and the amount added to calculate the final concentration of H2SO3. To find the volume of HCl needed to reach a pH of 7.00, we can use the formula for the pH of a buffer solution:
pH = pKa1 + log([HSO3-]/[H2SO3])
where pKa1 is the first dissociation constant of H2SO3 (1.20 x 10^-2).
Setting pH = 7.00 and solving for [HCl] will give the volume of HCl needed to reach the desired pH. This can then be converted to milliliters.
To know more about Chemical equations
https://brainly.com/question/26694427
#SPJ4
Explain in your own words what the author means when he says that “on a molecular level, no one compound is grosser than any other.”
When the author states that "on a molecular level, no one compound is grosser than any other," he is suggesting that at the smallest level of matter, which is the molecular level, there is no inherent difference between different compounds.
What is the molecular level about?All compounds are made up of molecules, which are simply collections of atoms. The atoms themselves are made up of protons, neutrons, and electrons, which are all subatomic particles.
Thus, the author is saying that on a molecular level, all compounds are made of the same basic building blocks, and therefore, no one compound is fundamentally different or "grosser" than any other. It could be that the author is trying to make a point about the subjective nature of describing something as "gross" or not, and how this is not a scientifically valid way to measure the properties of a compound.
In summary, the author is pointing out that at the molecular level, all compounds are made up of the same building blocks, and therefore, one compound is not inherently "better" or "worse" than another.
Learn more about molecular level from
https://brainly.com/question/20455963
#SPJ1
85.63% carbon and 14.37% hydrogen. its molar mass is found to be 112.21 g/mol. what is the molecular formula of the compound?
The molecular formula is CH2 x 8 = C8H16, which is the molecular formula of octane.
The molecular formula can be determined by finding the empirical formula, which is the easiest whole-number ratio of particles in a compound, and afterward deciding the molecular formula from the empirical formula and the molar mass.
First, find the number of moles of carbon and hydrogen in the sample:
Carbon: 85.63 g/(12.01 g/mol) = 7.13 molesHydrogen: 14.37 g/(1.01 g/mol) = 14.27 molesThen, divide each number of moles by the most modest number of moles to acquire the easiest whole-number ratio:
Carbon: 7.13 moles/7.13 moles = 1Hydrogen: 14.27 moles/7.13 moles = 2In this way, the empirical formula is CH2. To find the molecular formula, we have to multiply the empirical formula by a whole number to get a molar mass equivalent to the noticed molar mass of 112.21 g/mol.
Dividing the noticed molar mass by the empirical formula mass (12.01 + 2 * 1.01 = 14.03 g/mol) gives:
112.21 g/mol/14.03 g/mol = 8
Thus, the molecular formula is CH2 x 8 = C8H16, which is the molecular formula of octane.
To learn more about the molecular formula:
https://brainly.com/question/15960587
#SPJ4
explain why coders must reference both the alphabetic index and tabular list.
Coders must reference both the alphabetic index and tabular list because the Alphabetic Index does not always give the full code. Referring to the Tabular List to verify that no other character will be required.
It is essential to use both the Alphabetic Index as well as Tabular List when locating and assigning a code. The Alphabetic Index does not provide the full code. Selection of the full code, including laterality and any applicable seventh character, can only done in the Tabular List.
As with the CPT, procedures and services are looked up in the Alphabetic Index, as well as the Tabular List which is used to confirm that the code is most accurate and appropriate one.
To know more about tabular list here
https://brainly.com/question/19250157
#SPJ4
changes to the identity of matter are called
Chemical Change. Chemical changes occur when bonds are broken and/or formed between molecules or atoms. This means that one substance with a certain set of properties (such as melting point, color, taste, etc) is turned into a different substance with different properties
Answer: Chemical Change.
Explanation: Chemical changes occur when bonds are broken and/or formed between molecules or atoms. This means that one substance with a certain set of properties (such as melting point, color, taste, etc) is turned into a different substance with different properties
What effect will a wet spinach extract have on the TLC analysis? Select all the correct answers.
A. Water is polar and will adhere to the silica.
B. Pigments will stay near the bottom of the plate.
C. Separation of pigments will be successful.
D. Separation of pigments will be unsuccessful.
In TLC analysis, Water is polar and will adhere to the silica and Separation of pigments will be unsuccessful.
TLC (Thin Layer Chromatography) is a method for separating and analyzing mixtures of chemical compounds. The stationary phase in TLC is typically a layer of silica or alumina on a glass or plastic plate. When a wet spinach extract is applied to the plate, the water present in the extract can interfere with the separation process
Water is polar and will adhere to the silica, causing the pigments in the extract to become more difficult to separate. This can result in a separation that is unsuccessful or less accurate than it would have been if the extract had been dry.
Hence, the correct options are "A" and "D".
To know more about analysis, click here.
https://brainly.com/question/28180154
#SPJ4
question what is true about the hydration process? select all that apply: hydration is a solvation process where the solvent is water. the hydration involves breaking ionic solid and mixing in solvent. the hydration involves separating solvent molecules and mixing with ions in solution. the process is generally exothermic. the process is generally endothermic.
The following statements are true about the hydration process: Hydration is a solvation process where the solvent is water, The hydration involves breaking ionic solid and mixing in solvent,The process is generally exothermic.
Hydration is a process in which an ionic solid (typically a salt) dissolves in water to form a solution. In the process, water molecules surround and hydrate individual ions, separating them from each other and allowing them to mix uniformly in the solvent. This process is driven by the attractive forces between the positive and negative ions and the water molecules, which can cause the release of energy in the form of heat. As a result, hydration is generally exothermic, meaning that it releases heat. This can be seen as the solution becoming warm when a salt is dissolved in water. The release of heat is due to the breaking of ionic bonds in the solid and the formation of new bonds between the ions and the water molecules.
To know more about solvent
https://brainly.com/question/14797683
#SPJ4
one recent concern of the epa is an increase in the atmosphere's carbon dioxide content, a phenomenon known as the
One recent concern of the EPA is an increase in the atmosphere's carbon dioxide content, a phenomenon known as the greenhouse effect.
ABOUT GREENHOUSE EFFECTIn general, the greenhouse effect is defined as the process of increasing the earth's temperature caused by changes in the composition of the atmosphere. Causes sunlight to remain on earth and cannot be reflected perfectly, leaving the atmosphere.
The greenhouse effect was first introduced to the general public in 1824 by a scientist named Joseph Fourier. According to the opinion that Joseph Fourier conveyed to the public. He considered the greenhouse effect to be a warming process caused by the composition of the atmosphere.
If it is interpreted according to the processes and consequences arising from the greenhouse effect, it is a natural phenomenon that occurs due to the reflection of sunlight that passes through the earth's atmosphere. Caused by various substances present on the earth's surface, the severity of this phenomenon can damage the atmosphere blanket.
Learn more about greenhouse effect at
https://brainly.com/question/13706708.
#SPJ4
4. Which of the following is true about used antifreeze?
OA. It can be treated just like new antifreeze
OB. It is not recycleable
OC. It can never be reused in a vehicle
OD. It often contains heavy metals
Answer:
D. It often contains heavy metals.
Explanation:
Used antifreeze should not be reused in a vehicle, it is not recyclable, and it should be disposed of properly because it often contains heavy metals, such as lead and copper, which can be harmful to the environment and human health. It should not be treated just like new antifreeze. It is important to check the antifreeze levels and quality regularly and replace it with fresh antifreeze as needed.
Carbon-fibre-reinforced plastic (CRP) is used in the manufacture of golf clubs and tennis rackets.
a. What are composite materials?
b. Which two substances are used to manufacture this composite material?
Consider data in the table (photo).
c. Discuss the advantages and disadvantages of using the three materials above in the manufacture of golf clubs.
Answer:
a. Composite materials are materials made from two or more different substances that are combined to create a new material with specific properties. They are often used in applications where a combination of properties is needed, such as high strength and low weight.
b. Carbon-fibre-reinforced plastic (CRP) is a composite material that is made from a combination of carbon fibers and a plastic resin.
c.
The advantages of using graphite in the manufacture of golf clubs include its light weight, which allows for greater clubhead speed and distance, and its ability to absorb vibrations, which can make the club more comfortable to use.
The advantages of using steel in the manufacture of golf clubs include its durability and resistance to wear and tear. It is also relatively inexpensive and readily available.
The advantages of using carbon fiber in the manufacture of golf clubs include its high strength-to-weight ratio, which can result in a more stable clubhead and increased accuracy, as well as its ability to be shaped and molded into complex shapes.
The main disadvantage of using graphite is that it is not as durable as steel, which means the club may need to be replaced more frequently.
The main disadvantage of using steel is that it is heavier than graphite, which can make it more difficult to generate clubhead speed and distance.
The main disadvantage of using carbon fiber in the manufacture of golf clubs is that it is relatively expensive compared to graphite and steel.
It should be noted that the choice of material for golf clubs also depends on the personal preferences and the intended use of the club.
if one (1) gram of sugar provides 4 calories of energy, what is the calorie content from sugar in a serving of cereal that has 9.20 grams of sugar?
If one 1 gram of the sugar provides 4 calories of the energy, the calorie content from the sugar in a serving of the cereal that has the 9.20 grams of sugar is 36.8 calories.
The 1 gram of sugar provide = 4 calories
The calories that we are taken from our food gives us the energy.
The amount cereal contains the sugar = 9.20 grams
The calorie content is as follows :
The calorie content in the cereal is = 4 × 9.20 calories
The calorie content in the cereal is = 36.8 calories.
Thus, the amount of the calories in the serving of the cereal of 9.20 grams is the 36.8 calories.
To learn more about calories here
https://brainly.com/question/16541406
#SPJ4
hydrates are formed when aldehydes/ketones are reacted with h2o. under acidic conditions, the first step of the mechanism is . under basic conditions, the first step of the mechanism is .
Hydrates are formed when aldehydes/ketones are reacted with H₂O. Under acidic conditions, the first step of the mechanism is protonation of the carbonyl. Under basic conditions, the first step of the mechanism is addition of the nucleophile to the carbonyl.
Aldehydes and ketones react with water to create hydrates. The carbonyl is protonated as the first step in the procedure when the environment is acidic. The addition of the nucleophile to the carbonyl is the initial step in the process under normal circumstances.
Water reacts with aldehydes and ketones to produce 1,1-geminal diols, also referred to as hydrates. Since the equilibrium eventually moves back to the initial materials (according to Le Chatelier's principle), hydrates are typically not stable enough to be isolated. However, in the aqueous oxidation of aldehydes to acids, hydrates are the reactive species.
Mechanism for the formation of hydrates under acid catalysisAn acid/base reaction comes first. We need to protonate on O to activate the carbonyl because there is just a weak nucleophile.When the electrophilic C in the compound C=O is attacked by the nucleophilic O in water, the bond is broken and the positive O is given electrons.An acid/base reaction comes in third. Oxonium ion deprotonation renders the hydrate's charge neutral.Learn more about hydrates at https://brainly.com/question/15724859
#SPJ4
determine the maximum mass the of product that may be formed is you have 60 g Mg and 16 grams available?
the general molecular formula for alkanes is cnh2n 2. what is the general molecular formula for alkynes? click in the answer box to activate the palette.
The general molecular formula for alkynes is [tex]C_{n} H_{2n-2}[/tex]. These are non polar as it contains only carbon and hydrogen.
Alkynes are defined as the organic compound molecules made of the functional group carbon-carbon triple bonds. The molecular formula of alkynes is [tex]C_{n} H_{2n-2}[/tex]. Alkynes are unsaturated hydrocarbons. Alkenes have the suffix –ene and alkynes has the suffix –yne. The suffix is used when there is only one alkyne in the molecule. Alkynes undergo same reactions in many reactions as alkanes. It can react twice because of the presence of the two p-bonds in the triple bond. Alkynes contains only carbon and hydrogen. These are nonpolar. These are not soluble in water and are less dense than water.
To learn more about Alkynes please visit:
https://brainly.com/question/11630328
#SPJ4
The complete question is,
The general molecular formula for alkanes is cnh2n 2. what is the general molecular formula for alkynes?
10. which methods can distinguish between solutions of a strong monoprotic acid and a weak monoprotic acid of the same concentration?
The main difference between a strong monoprotic and a weak monoprotic acid at same concentration is its ionization. The strong acid will be more reactive, more conductive and have lower pH.
An aqueous solution of a strong and weak monoprotic acid at same concentration shows differences mainly because of the difference in ionization. A strong acid is completely ionized, but weak acid will be partially ionized. So hydrogen ion concentration will be more in strong acids.
As Hydrogen ion concentration is more strong acids exhibits a lower pH. So it can be tested using a pH meter.Since it is completely ionized, the stronger acids will be more conductive. By using a conductometer we can determine the conductivity.The reactivity can be tested by placing a solid metal in the acid. The stronger acid will bubble vigorously compared to a weaker acid.So we can test conductivity, reactivity and pH to identify the stronger monoprotic acid.
For more details regarding strong and weak monoprotic acids, kindly refer
https://brainly.com/question/13032224
#SPJ4
PLEASE HELP I WILL GIVE BRAINLIEST
The enthalpy change, ΔH of the reaction is -74.1 kJ/mol.
What is the enthalpy of a reaction?The change in the enthalpy of a chemical reaction that takes place at constant pressure is known as the Heat of Reaction (also known as the Enthalpy of Reaction).
It is a thermodynamic unit of measurement that can be used to determine how much energy is released or created per mole during a reaction.
The enthalpy change, ΔH, of the given reaction is calculated as follows:
ΔH = ΔH₁ + ΔH₂ - ΔH₃
where;
ΔH₁ = -571.6 kJ
ΔH₂ = -393.5 kJ
ΔH₃ = -890.4 kJ
ΔH = -571.6 kJ + ( -393.5 kJ) - (-890.4 kJ)
ΔH = -74.7 kJ
Learn more about enthalpy change at: https://brainly.com/question/15174388
#SPJ1
which substance would not work as a grignard reagent?
Any substance that contains acidic functional groups would not work as a Grignard reagent.
The Grignard reaction can be basically categorized as an organometallic chemical reaction in which there is a Grignard reagent which is the alkyl, vinyl, allyl, or aryl-magnesium halides is reacted with particular carbonyl group in an aldehyde or in a ketone. This reaction is crucial particularly for the formation of the carbon–carbon bonds.
Grignard reagents that are used in this reaction are basically strong nucleophiles and possess the ability to form carbon-carbon bonds, making them similar to the organolithium reagents. Grignard reagents cannot be made from substances having acidic functional groups present in the halogen compound. The Grignard reagent will get destroyed by the reaction with acidic hydrogen atoms of water, phenols, alcohols, or carboxylic acid groups.
To know more about Grignard reagent here
https://brainly.com/question/15876201
#SPJ4
what is the parent name for a molecule containing only an ether substituent using only the common name
The parent name for a molecule containing only an ether substituent using only the common name is "alkoxy."
Ethers, which contain an oxygen atom connected to two carbon atoms, are named using the common name system as "alkoxy" derivatives, where "alk" represents any alkyl group (a chain of carbon atoms) and "oxy" represents the oxygen atom in the ether functional group.
The name of the ether reflects the alkyl group or groups attached to the oxygen atom, and is formed by taking the name of the alkyl group and adding the suffix "-oxy". For example, an ether with a propyl group (C₃H₇) on one end and a methyl group (CH₃) on the other end would be named as "propoxy-methyl ether."
To learn more about alkyl group visit: https://brainly.com/question/24030427
#SPJ4
9. The diagram below depicts a compound.
Ca
Ca++
P-
P-
Ca
Use depiction of the chemical structure of this compound to write the chemical formula for each
listed compound. Then, write the formula for each ion that makes up the compound. Be sure to
indicate the charge of the ion.
Chemical Formula
Cation
Anion
Answer:
The chemical formula for the compound depicted in the diagram is: Ca3(P2O4)2
The cations in the compound are:
Ca2+ (calcium ion)
The anions in the compound are:
P3- (phosphite ion)
O2- (oxide ion)
Explanation:
Hope this helps!
if a simple distillation were to be performed on a mixture of 35 mol % hexane and 65 mol % heptane, what would the initial distillate be?
Answer: 343y4ou1ytuoy3yt7y413
Explanation:
oy34ouy4y734648734713
why thermometer shouldn't touch styrofoam
Thermometer shouldn't touch styrofoam because contacting the test tube does not generate heat or pressure, touching the thermometer does not result in the thermometer exploding.
Glass makes up the thermometer. The test tube does not break by the simple contact of the thermometer with it. Because the container may not have the same temperature as the solution, the thermometer shouldn't touch the edges or the bottom of the container (especially if the container is not a very good conductor of heat).
As a result, touching the container with the thermometer could result in an incorrect reading. Your body's ability to produce and release heat is indicated by your body temperature. Even when the outside temperature is changing rapidly, the body is quite adept at maintaining its internal temperature within a safe range.
When you get too hot, your skin's blood vessels enlarge to help transfer the extra heat to the surface of your skin.
Learn more about the Thermometer here: https://brainly.com/question/2339046
#SPJ4
(iii) The filtrate was an alkaline solution of potassium carbonate. This was titrated
against a standard hydrochloric acid solution to find the concentration of the
potassium carbonate.
K₂CO₂ + 2HC1
2KCI+ CO₂ + H₂O
Methyl orange was used as an indicator, this turns from yellow in the potassium
carbonate solution to pink when the potassium carbonate is neutralised by the
hydrochloric acid. The following results were obtained using 25.00 cm³ samples of
the potassium carbonate solution.
Burette finish/cm³
Burette start / cm³
24.80
0.00
26.20
1.60
26.55
2.00
I Calculate the mean volume of hydrochloric acid added, using all three sets
of results.
[1]
(b) In another experiment Penny obtained white crystals of potassium carbonate, K₂CO3,
from the wood ash.
(1) Show that the percentage by mass of potassium in K₂CO, is 56.6.
[2]
Ans
SESTS
Answer:
h
Explanation:
I. To calculate the mean volume of hydrochloric acid added, you need to find the average of the three values obtained from the burette readings.
First set: 24.80 - 0.00 = 24.80 cm³
Second set: 26.20 - 1.60 = 24.60 cm³
Third set: 26.55 - 2.00 = 24.55 cm³
The mean volume of hydrochloric acid added is (24.80 + 24.60 + 24.55) / 3 = 24.66 cm³
b. (1) To find the percentage of potassium in K₂CO₃, you need to calculate the mass of potassium in the compound and divide it by the total mass of the compound, then multiply by 100.
The relative atomic mass of potassium is 39.1 and the relative atomic mass of carbon is 12.01 and oxygen is 16.00.
So, the mass of potassium is 2 x 39.1 = 78.2 g.
The mass of carbon is 1 x 12.01 = 12.01 g.
The mass of oxygen is 3 x 16.00 = 48.00 g.
The total mass of the compound is 78.2 + 12.01 + 48.00 = 138.21 g.
The percentage by mass of potassium in K₂CO₃ is (78.2 / 138.21) x 100 = 56.6%.
What is molar mass?
A. The number of moles in one gram of substance
B. The mass of one molecule of a substance
C. The mass of one mole of a substance
D. The number of molecules In one mole of a substance
ote
as
3
c
The concentration of lactic acid in yoghurt can be found by an acid-base
titration with sodium hydroxide.
In an experiment, 40-0 cm' of sodium hydroxide solution of concentration
0-100 mol dm exactly neutralised the lactic acid present in a 50-0 g tub of
yoghurt.
Giving your answers to three significant figures, calculate
I
the number of moles of sodium hydroxide used,
1:2 mole.
[1]
II
the number of moles of lactic acid that were present in the yoghurt,
assuming that I mole of sodium hydroxide reacts with 1 mole of lactic
acid,
1.2 mole.
[1]
III the mass of lactic acid (relative molecular mass 90-0) present in the
50-0 g tub of yoghurt,
Dx 3c
1.2 x 90.0
= 1089
IV the percentage, by mass, of lactic acid in the yoghurt.
100 =
46.3%
108
[1]
[1]
x10
3
Ans
1476797
Answer:
I'm sorry, I believe there is a mistake in your calculation.
To calculate the number of moles of sodium hydroxide used, you need to use the formula: moles = (concentration x volume) where the concentration is given in mol/dm^3 and the volume is given in dm^3.
so in this case, number of moles = (0.100 x 0.040) = 0.004 moles.
II
To calculate the number of moles of lactic acid that were present in the yoghurt, we can use the stoichiometry of the reaction between sodium hydroxide and lactic acid. Since the reaction is a 1:1 reaction, the number of moles of lactic acid will be equal to the number of moles of sodium hydroxide used, which is 0.004 moles.
III To calculate the mass of lactic acid present in the yoghurt, we can use the formula mass = moles x molar mass where molar mass of lactic acid is 90.0 g/mol
so the mass of lactic acid = 0.004 x 90.0 = 0.36 g
IV To calculate the percentage of lactic acid by mass in the yoghurt, we can use the formula % by mass = (mass of lactic acid / mass of yoghurt) x 100
so the percentage of lactic acid by mass in the yoghurt = (0.36 / 50.0) x 100 = 0.72 x 100 = 72%
explain how the structure of the carbon atom affects the type of bonds it forms module
The structure of the carbon atom affects the type of bonds it forms because of the number and arrangement of electrons in its outermost energy level, or valence shell. Carbon has four valence electrons and can form strong covalent bonds with other elements to complete its valence shell.
Carbon can form single, double, and triple bonds depending on the number of electrons it shares with another element. In a single bond, carbon shares one pair of electrons with another element. In a double bond, it shares two pairs of electrons, and in a triple bond, it shares three pairs of electrons.
The structure of the carbon atom also determines the geometry of the molecules it forms. For example, in a carbon-carbon single bond, the carbon atoms are held together by a strong sigma bond and have a linear geometry. In a carbon-carbon double bond, the carbon atoms are held together by two strong sigma bonds and one weak pi bond, giving the molecule a bent geometry.
In addition, the ability of carbon to form multiple bonds with other elements, such as oxygen, nitrogen, and sulfur, allows it to form a wide variety of complex and diverse molecules, including sugars, proteins, and oils.
In summary, the structure of the carbon atom, with its four valence electrons, affects the type of bonds it forms and the geometry of the molecules it forms. The versatility of carbon in forming different types of bonds and its ability to form complex molecules are critical to the diversity and complexity of life on Earth.
Learn more about valence shell here:
https://brainly.com/question/17219832
#SPJ4
the pot of water on the stove is heated by 25 using 1250.0 joules. how many grams of water were in the pot ?
Water has a specific heat of 4179 J/kg K, which is the amount of energy needed to increase 1 g of water's temperature by 1 Kelvin.
Why does pot a take more time to heat up?
There are a few potential causes if the preheating process in your instant pot is taking a lengthy time. The pot's improper sealing is the most typical cause. It will take longer for the pot to heat up if there is a space between the lid and the pot.The bigger amount of water would therefore be less hot than the smaller amount of water when the heat is dispersing equally over the water, and it would take longer for the larger amount of water to reach the same temperature as the smaller.Since the pot will continue to be heated to the same level (about 100 degrees Celsius), the amount of heat energy entering the pot will also remain constant.To learn more about specific heat refer to:
https://brainly.com/question/28309064
#SPJ1
bam makes a second solution, adding 5.35 g of co(ch3coo)2 to 39.03 ml of h2o. calculate the concentration of this solution in mole fraction.
The concentration of the solution in mole fraction is 0.01379464.
MW of water = 18.015 g/mol
MW of Co(CH₃COO)₂ = 177.0212 g/mol
Density of water = 0.9975 g/mL
Mass of water = volume of water × density of water
= 39.03 × 0.9975
= 38.932425
Moles of water = mass /molar mass of water
= 38.932425 / 18.015
= 2.1612
Moles of Co(CH₃COO)₂ = mass / molar mass
= 5.35 / 177.0212
= 0.03023
Mole fraction of Co(CH₃COO)₂ = moles of cobalt acetate / total moles
= 0.03023 / ( 0.03023 +2.1612)
= 0.03023 / 2.19143
= 0.01379464
Hence, the concentration of the solution in mole fraction is 0.01379464.
Learn more about mole fraction from the link given below.
https://brainly.com/question/24513048
#SPJ4
Please Help Me:
Five liters of air at -36 c is warmed to 89c. what is the new volume if the pressure remains constant?
Five liters of -36 °C air are heated to 89 °C. If the pressure doesn't change, the new volume, V2, is 7.64 liters.
What is an illustration of pressure?Pressure is the measure of how much force is exerted on a particular area. Pressure is defined as Force per Area. An object is under pressure when a force is applied to a portion of its surface. The pressure divided by the surface where another force is exerted is the expression for compression. If you touch the flat part of something, like a scalpel even, across fruit, the covering will hold up. A large area is covered by the force.
What factors determine pressure?P = F / A, usually force per unit of area, is the formula for computing pressure. The sign for temperature in particle physics is p, and the basic measurement for determining pressure loss is the pascal.
To know more about pressure visit:
https://brainly.com/question/2704868
#SPJ1
I WILL GIVE 36 POINTS TO THOSE WHO ANSWER THESE PROBLEMS RIGHT NOOOO SCAMS PLEASE
One molecule of glucose contains 6 atoms. Compounds are stable when the atoms involved have an entire outermost electron shell.
What causes atoms to become charged when an ionic bond is formed?
Atoms become charged when an ionic bond is formed due to the transfer of electrons from one extent to another. This constructs a positive ion known as a cation and a negative ion known as an anion that is attracted to each other and forms an ionic bond.
The columns that are vertical in the periodic table are called groups or families.
Where are non-metals located on the periodic table?
Non-metals are typically located on the right side of the periodic table.
To know more about non-metals, visit here:
brainly.com/question/29404080
#SPJ1
a liquid solvent is added to a flask containing an insoluble solid. the total volume of the solid and liquid together is 91.0 ml. 91.0 ml. the liquid solvent has a mass of 21.0 g 21.0 g and a density of 0.865 g/ml. 0.865 g/ml. determine the mass of the solid given its density is 1.75 g/ml.
The mass of the solid of density 1.75 g/ mole is 116.77g. This is calculated using the expression for density.
Density is defined as the mass per unit of volume of the substance. The symbol used for density is ρ. Basically density is defined as mass divided by volume.
Density = mass/ volume
mass of the liquid = 21.0 g
density of the liquid = 0.865 g/ mole
volume of liquid = mass / density
= 21.0 g / 0.865g/ mole
= 24.27 ml
The total volume of the solid and liquid together is 91.0 ml.
Total volume = volume of solid + volume of liquid
volume of solid = total volume - volume of liquid
= 91.0ml - 24.27 ml
= 66.73 ml
density of the solid= 1.75 g/ mole.
mass = density * volume
= 1.75 g /mole * 66.73 ml
= 116.77 g
To learn more about Density please visit:
https://brainly.com/question/1354972
#SPJ4
