The given equation is: Zn (s) + Cu2+ (aq) → Cu (s) + Zn2+ (aq). Given that, the standard cell potential (E°cell) for the above reaction is 1.10 V.
Now, we need to calculate the cell potential (Ecell) when the concentration of [Cu2+] and [Zn2+] is 0.10 M.
The Nernst equation is used to calculate the cell potential under non-standard conditions. Ecell = E°cell - (0.0592/n)logQ where, Q = reaction quotient n = the number of electrons transferred.
Thus, the equation for the given reaction is written as follows: Zn (s) + Cu2+ (aq) → Cu (s) + Zn2+ (aq).
Now, calculate the reaction quotient, Q.Q = ([Cu2+][Zn2+])/([Zn][Cu2+]) = ([Cu2+]^1/[Zn2+]^1).
On substituting the given values, we get;Q = (0.10/1)/(1/0.10)Q = 1Ecell = E°cell - (0.0592/2)logQ = 1.10 - 0.0296log (1) = 1.10 V.
Thus, the cell potential when the concentration of [Cu2+] and [Zn2+] is 0.10 M is 1.10 V, which is the same as the standard cell potential (E°cell).
Hence, the correct answer is 1.10V.
Note: The number of electrons transferred in the given reaction is 2.
To know more about standard cell potential visit:
https://brainly.com/question/32137450
#SPJ11
a chemist dissolves156 mg of pure hydrobromic acid in enough water to make up 220 ml of solution. calculate the ph of the solution. be sure your answer has the correct number of significant digits.
The given information for the question is as follows: Amount of pure hydrobromic acid = 156 mg Volume of solution = 220 ml
The formula for calculating the pH of a solution is as follows:
pH = -log[H+]The hydrobromic acid completely dissociates in water, so the concentration of H+ ions is equal to the concentration of the hydrobromic acid. The molecular mass of HBr = 1 + 79.904 = 80.904 g/mol Therefore, the number of moles of hydrobromic acid in the solution is:156 mg / 80.904 g/mol = 0.00193 mol
The concentration of the hydrobromic acid in the solution is:0.00193 mol / 0.220 L = 0.00877 M The pH of the solution can now be calculated: pH = -log[H+]pH = -log(0.00877)pH = 2.056Therefore, the pH of the solution is 2.06 (to two significant figures).
To know more about hydrobromic acid refer to:
https://brainly.com/question/30782351
#SPJ11
match each five-electron group designation to the correct molecular shape.
The correct match of each five-electron group designation to the molecular shape is given below: Five electron group designation are linear trigonal planar tetrahedral trigonal bipyramidal and octahedral.
Molecular Shape:-Linear - This electronic geometry is determined when there are two bonds and no lone pair of electrons around the central atom. Example: CO2Trigonal planar - When a central atom is surrounded by three atoms and no lone pair, the geometry is trigonal planar.
Tetrahedral - The electronic geometry is determined by four bonds and no lone pair of electrons around the central atom. Example: CH4.Trigonal bipyramidal - A central atom surrounded by five atoms or ligands is in the shape of a trigonal bipyramid. Example: PCl5Octahedral - When a central atom is surrounded by six atoms or ligands and is in the shape of an octahedron, the electronic geometry is octahedral.
To know more about electron visit:
https://brainly.com/question/18367541
#SPJ11
True / False classify each of the statements about gases as true or false.
- Oxygen molecules at 25 °C are moving faster than oxygen molecules at 0 °C. - True
- All hydrogen molecules in a sample of hydrogen gas at 25 °C move with the same velocity. - False
- Since nitrogen molecules are heavier than hydrogen molecules, they exert higher pressure than hydrogen molecules. - False
- When gases collide with container walls, they exert pressure. - True
- Nitrogen molecules remain suspended in the atmosphere because gravitational forces do not attract them to Earth. - False
- The kinetic energy of gas molecules increases with temperature, so oxygen molecules at 25 °C will have higher average velocities compared to oxygen molecules at 0 °C. Hence, the statement is true.
- In a sample of gas, the individual gas molecules will have a distribution of velocities due to different kinetic energies. Therefore, not all hydrogen molecules in a sample at 25 °C will have the same velocity. The statement is false.
- The pressure exerted by a gas depends on factors such as temperature and the number of gas molecules, not just the molecular weight. So, the statement that nitrogen gas exerts more pressure because nitrogen molecules are heavier is false.
- When gases collide with container walls, they exert pressure. These collisions create a force per unit area, resulting in pressure. Therefore, the statement is true.
- Nitrogen molecules in the atmosphere do experience gravitational forces, and it is gravity that keeps them close to the Earth's surface. The statement that they are not attracted to Earth by gravitational forces is false.
The complete question is:
True / False classify each of the statements about gases as true or false.
- Oxygen molecules at 25 "Care moving faster than oxygen molecules at 0 °C.
- All hydrogen molecules in a sample of hydrogen gas at 25 °C move with the same velocity. - False
- Since nitrogen molecules are heavier than hydrogen molecules, they exert higher pressure than hydrogen molecules. - False
- When gases collide with container walls, they exert pressure. - True
- Nitrogen molecules remain suspended in the atmosphere because gravitational forces do not attract them to Earth. - False
Learn more about Nitrogen gas at https://brainly.com/question/15842685
#SPJ11
when moderately compressed, gas molecules have _______ attraction for one another.
When moderately compressed, gas molecules have very little attraction for one another with an below. A gas is a state of matter that is highly compressible, which means that its volume can be reduced by compressing and that it expands to fill any available space.
The kinetic energy of the gas molecules is the driving force behind this behavior. The gas molecules are in constant motion, colliding with one another and with the walls of the container in which they are contained. The intermolecular forces of attraction between gas molecules are negligible when the gas is moderately compressed. In other words, when the pressure of
the gas is not too high, the attractive forces between the molecules are negligible. This is because the distance between the molecules is too great for the attractive forces to have any significant effect. The ideal gas law, PV=nRT, assumes that the molecules of a gas have zero volume and do not interact with one another. While real gases do have volume and do interact with one another, the ideal gas law is a good approximation of the behavior of gases under most conditions.
To know more about molecules Visit;
https://brainly.com/question/29690633
#SPJ11
Of the following, which do not increase the solubility of a gas in a liquid? Select all that apply.
Select all that apply:
Decreased temperature
Constant temperature
Increased temperature
None of the above
None of the options increase the solubility of a gas in a liquid. In certain cases, such as with ideal solutions or dilute solutions, the solubility of gases may remain constant regardless of temperature. The correct answer is "None of the above."
This occurs when the enthalpy change associated with the dissolution of the gas is approximately balanced by the enthalpy change associated with the expansion of the solvent. Consequently, changes in temperature do not result in noticeable changes in gas solubility.
Therefore, in this context, none of the options (decreased temperature, constant temperature, increased temperature) increase the solubility of a gas in a liquid, the correct answer is "None of the above."
To know more about solubility of a gas, refer to the link:
https://brainly.com/question/14396373#
#SPJ11
the kf for co(nh3)62 is 1.0 × 10-5 and the ksp for co(oh)2 is 2.5 × 10-15. what is the correct equilibrium constant (k) for the following reaction CO(OH)2(s) + 6 NH3(aq) = Co(NH3)62 + (aq) + 2 OH"(aq) K=2.5 x 10-20 K = 2.5 x 10-10 OK=1.0 x 10-5 K-4.0 x 10° K = 4.0 x 1019
The correct equilibrium constant (K) for the reaction CO(OH)₂(s) + 6 NH₃(aq) = Co(NH₃)₆²⁺ (aq) + 2 OH⁻(aq) is K = 2.5 x 10⁻²⁰.
What is the meaning of the symbols used in the above expression?The given reaction is a complex ion formation reaction. In the reaction, carbon monoxide hydroxide and ammonia react to form a complex ion of cobalt hexamine and two hydroxide ions.
The equation for the above reaction can be written as:
CO(OH)₂(s) + 6NH₃(aq) ⇌ Co(NH3)₆²⁺(aq) + 2OH⁻(aq)In order to find the value of K, we need to first find the concentration of each of the products and reactants.
The concentration of Co(NH₃)₆²⁺(aq) is equivalent to the concentration of the complex ion because it is a product.
Learn more about equilibrium reactions at:
https://brainly.com/question/9987351
#SPJ11
The correct equilibrium constant (k) for the reaction
CO(OH)2(s) + 6 NH3(aq) = Co(NH3)62 + (aq) + 2 OH"(aq)
is K = 2.5 x 10-20.
Equilibrium constant is defined as the product of concentrations of products raised to their stoichiometric coefficients in the balanced chemical equation divided by the product of concentrations of reactants raised to their stoichiometric coefficients in the balanced chemical equation. It is denoted by K.
We can calculate the equilibrium constant (K) if we know the concentrations of reactants and products at equilibrium. If we are given equilibrium constant (K) and concentrations of reactants or products, we can calculate the remaining equilibrium concentration.
To know more about equilibrium constant visit:
https://brainly.com/question/28559466
#SPJ11
an atom of 135i has a mass of 134.910023 amu. calculate the binding energy in mev per atom. enter your answer with 4 significant figures and no units.
Given that the mass of an atom of 135I is 134.910023 amu, We need to calculate the binding energy of the atom in MeV per atom. . An atom of 135I has a binding energy of 247.4 MeV per atom.
We know that mass defects can be used to calculate the binding energy of the atom. Mass defect = (Z * Mp + N * Mn - m)Where Z = Number of protons in the atom Mp = Mass of a proton N = Number of neutrons in the atom Mn = Mass of a neutron m = Mass of the atom Using the values from the question, we can calculate the mass defect: Z = 53 (From the atomic number of Iodine) Mp = 1.007276 amu Mn = 1.008665 amu N = 82 (Neutrons = Mass number - Atomic number)Mass of the atom, m = 134.910023 amu Mass defect = (53 * 1.007276 + 82 * 1.008665 - 134.910023) amu= (53.470328 + 82.70513 - 134.910023) amu= 0.265435 amu
The binding energy can be calculated as follows:
Binding Energy = (Mass defect) * (931.5 MeV/amu)
Binding Energy = 0.265435 * 931.5 MeV/amu
= 247.416525 MeV per atom Rounding off to 4 significant figures,
we get: Binding Energy = 247.4 MeV per atom. An atom of 135I has a binding energy of 247.4 MeV per atom.
To know more about neutron refer to:
https://brainly.com/question/26952570
#SPJ11
surface area of the water (cm2) 40.7 40.7 37.4 37.4 area of one molecule of stearic acid in cm2
Area of one molecule of stearic acid = (Surface area of the water / Number of molecules on the surface) × 2.
Given, surface area of the water (cm²) = 40.7, 40.7, 37.4, 37.4The area of one molecule of stearic acid can be calculated using the formula: Area of one molecule of stearic acid = (Surface area of the water / Number of molecules on the surface) × 2.
Let's calculate the number of molecules on the surface: Number of molecules on the surface = 2 × (6.022 × 10²³) / (18 × 10⁻³)Number of molecules on the surface = 2.006 × 10²⁹ molecules/m²Substitute the value of surface area of the water and number of molecules on the surface in the formula: Area of one molecule of stearic acid = (40.7 cm² / 2.006 × 10²⁹ molecules/m²) × 2 Area of one molecule of stearic acid = 4.054 × 10⁻²⁷ cm² (approx)Therefore, the area of one molecule of stearic acid is 4.054 × 10⁻²⁷ cm².
To know more about stearic acid visit:
https://brainly.com/question/16233112
#SPJ11
what is the symbol of an ion having 17 protons and 18 electrons
The symbol of an ion having 17 protons and 18 electrons is Cl-. An ion is formed when an atom either gains or loses one or more electrons.
An atom that loses one or more electrons becomes a positively charged ion called a cation. Conversely, an atom that gains one or more electrons becomes a negatively charged ion called an anion.In the given problem, we can determine the ion formed by the atom that has 17 protons and 18 electrons. We know that the atomic number of chlorine is 17, which means that an atom of chlorine has 17 protons.
But in this case, there are 18 electrons, which means that this atom has one more electron than normal. According to the definition of an ion, an atom that gains one or more electrons becomes a negatively charged ion called an anion. Therefore, the ion formed by the atom with 17 protons and 18 electrons is an anion. Since the element in question is chlorine, the symbol of the ion is Cl-.
To know more about atom visit:
https://brainly.com/question/1566330
#SPJ11
Part 1. At 460 K. the rate constant for this reaction is k-5.8 X 106s and the activation energy is = 265 kJ/mol. What is the frequency factor for this reaction? . Part 2 (1 point) K At what temperature would the reaction proceed with a rate four times faster than at 460 K?
The frequency factor for this reaction is 1.25 x 10^11 s^-1. The temperature at which the reaction proceeds four times faster than at 460 K is 1031.2 K.
Part 1: The Arrhenius equation is given by k = Ae^(-Ea/RT) where, A is the frequency factor, also known as the pre-exponential factor, Ea is the activation energy, R is the gas constant (8.314 J/mol.K) T is the absolute temperature in Kelvin. The rate constant is given ask = 5.8 x 10^6 sat T = 460 K, Ea = 265 kJ/mol
Substituting the values,k = Ae^(-Ea/RT)5.8 x 10^6 = A exp (-265000/(8.314 x 460))A =
Part 2: We know that the rate constant is proportional to the temperature as per the Arrhenius equation.k1/k2 = exp ((Ea/R)(1/T2 - 1/T1))
Let's assume that the rate constant at T1 (460 K) is k1. We are required to find the temperature at which the rate constant is four times faster, i.e., k2 = 4k1.
The expression for k2/k1 is,k2/k1 = exp((Ea/R)(1/T2 - 1/460))4 = exp((265000/8.314)(1/T2 - 1/460))
Taking the natural logarithm on both sides, ln(4) = (265000/8.314)(1/T2 - 1/460)Solving for T2,T2 = 1031.2 K
Therefore, the temperature at which the reaction proceeds four times faster than at 460 K is 1031.2 K.
More on frequency factor: https://brainly.com/question/27723476
#SPJ11
What mass of HBr (in g) do you need to dissolve a 3.2-g pure iron bar on a padlock? What mass of H2 would the complete reaction of the iron bar produce?
The mass of H2 produced during the complete reaction of the iron bar is 0.114 g. In this given scenario, we will use stoichiometry to calculate the amount of HBr and H2 required to dissolve a 3.2g pure iron bar.
In this given scenario, we will use stoichiometry to calculate the amount of HBr and H2 required to dissolve a 3.2g pure iron bar. The given chemical reaction is:
Fe(s) + 2HBr(aq) → FeBr2(aq) + H2(g)
We have to calculate the mass of HBr needed to dissolve a 3.2g pure iron bar on a padlock. To solve this question, we will use the stoichiometry concept that is the mole concept. We are given the mass of iron, so first, we will calculate the moles of Fe: Fe = 3.2 g / 56 g/mol = 0.057 moles
As per the balanced chemical equation, we need two moles of HBr to react with one mole of Fe. So, the number of moles of HBr required to react with 0.057 moles of Fe is: 2 moles of HBr = 1 mole of Fe
0.057 moles of Fe = 0.057 moles Fe × 2 moles HBr / 1 mole Fe = 0.114 moles HBr
The molar mass of HBr is 80g/mol, so the mass of HBr required is: Mass of HBr = 0.114 moles × 80 g/mol = 9.12 g
Therefore, we need 9.12g of HBr to dissolve a 3.2g pure iron bar on a padlock. Now, we will calculate the mass of H2 that will be produced during the reaction of the iron bar: According to the balanced chemical equation, the number of moles of H2 produced is the same as the number of moles of Fe used. We already calculated the moles of Fe, so the number of moles of H2 produced is:0.057 moles of H2The molar mass of H2 is 2 g/mol, so the mass of H2 produced is: Mass of H2 = 0.057 moles × 2 g/mol = 0.114 g
Therefore, the mass of H2 produced during the complete reaction of the iron bar is 0.114 g.
To know more about stoichiometry visit: https://brainly.com/question/28780091
#SPJ11
draw the lewis structure for brcl3 in the window below and then answer the questions that follow.
To draw the Lewis structure of a molecule, Calculate the total number of valence electrons in the molecule. Determine the central atom by considering the atom with the highest bonding capacity.
A Lewis structure is a structural representation of a molecule in which bonding electrons and non-bonding electrons are shown in order to predict the geometry and properties of the molecule. Distribute the remaining electrons among the peripheral atoms in the form of lone pairs, where each bond (single, double, or triple bond) is composed of two electrons and each lone pair is composed of two electrons.
The shape of the BrCl3 molecule is T-shaped. The shape of the BrCl3 molecule is determined by the number of lone pairs and the number of atoms around the central atom. In BrCl3, the central atom Br has three Cl atoms and two lone pairs around it. The two lone pairs take up more space than the three Cl atoms. This results in a T-shaped structure.
To know more about molecule visit:
https://brainly.com/question/32298217
#SPJ11
why does water expand when it goes from a liquid to a solid?
Water is one of the few substances that expands when it freezes from a liquid state to a solid state. The density of water decreases as it freezes because of hydrogen bonding. When water cools, its molecules move slowly, causing them to come closer together.
However, as the temperature continues to drop and the water starts to freeze, its molecules start forming a crystalline lattice structure. This structure forces the water molecules further apart from each other, which causes an expansion of about 9 percent in volume as compared to the volume of water in its liquid state.Water molecules bond together via hydrogen bonding when water is in its liquid state, which creates a three-dimensional network of interconnected molecules. This structure of interconnected molecules is maintained through hydrogen bonds, which are not very strong bonds in and of themselves.
When water is cooled, the hydrogen bonds become more stable and lock the molecules into a crystalline structure. The crystalline structure is less dense than the three-dimensional network of interconnected molecules that is characteristic of liquid water, so water expands when it freezes.It is significant that water expands when it freezes since it means that the density of water is highest at around 4 degrees Celsius. As water cools, it becomes denser and more massive until it reaches its freezing point. When it freezes, the ice floats on top of the water. If ice didn't float, lakes and oceans would freeze from the bottom up, killing the fish and other aquatic life that live in the water.
To know more about density visit;-
https://brainly.com/question/29775886
#SPJ11
In a mixture of noble gases, neon has a mole fraction of 0.5, argon has a mole fraction of 0.3, and xenon has a mole fraction of 0.2. Which gas will have the greatest partial pressure?
neon
argon
xenon
these will all have the same partial pressure
In a mixture of noble gases, the gas that will have the greatest partial pressure is Xenon. Mole fraction can be defined as a unit of concentration used in chemistry to measure the amount of one substance in a mixture of substances.
It is equal to the number of moles of a solute divided by the total number of moles of the solution. Therefore, given that in a mixture of noble gases, neon has a mole fraction of 0.5, argon has a mole fraction of 0.3, and xenon has a mole fraction of 0.2. The partial pressure of each gas can be calculated by using Dalton's Law of partial pressures which states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of each gas in the mixture.
Partial pressure of each gas can be calculated as follows: PNeon = (0.5) x Ptotal PArgon = (0.3) x Ptotal PXenon = (0.2) x Ptotal, where Ptotal is the total pressure of the mixture. Now, we can see that the partial pressure of Xenon will be the greatest because it has the highest mole fraction and will therefore contribute the most to the total pressure.
To know more about noble gases visit:-
https://brainly.com/question/19024000
#SPJ11
for the given matrix a, find a basis for the corresponding eigenspace for the given eigenvalue. a = ,
The basis for the corresponding eigenspace for the given eigenvalues of the matrix a is { [1; -1] } and { [2; 1] }.
Given the matrix a, the corresponding eigenspace for the given eigenvalue has to be found. Let the matrix a be defined as follows:a
= [4 2; 1 3]
To find the eigenvectors and eigenvalues, let's start by finding the characteristic equation of the matrix
a.|a - λI| = 0
Here, a is the given matrix, λ is the eigenvalue and I is the identity matrix of the same order as that of
a.|a - λI| = [4-λ 2; 1 3-λ]
= (4-λ)(3-λ) - 2
= λ^2 - 7λ + 10
= (λ - 2)(λ - 5)
On solving the above quadratic equation, we get the eigenvalues of the matrix a as
λ1 = 2 and λ2 = 5.
To find the eigenvectors, we need to solve the following equation for each eigenvalue:
(a - λI)x = 0For λ1
= 2,
we have a - λ1I = [2 2; 1 1].
Solving the equation
(a - λ1I)x = 0,
we get
x = α[1; -1], where α is any non-zero constant.
For λ2 = 5, we have a - λ2I = [-1 2; 1 -2].
Solving the equation (a - λ2I)x = 0, we get
x = β[2; 1],
where β is any non-zero constant.
Hence, the basis for the eigenspace corresponding to λ1 = 2 is { [1; -1] } and the basis for the eigenspace corresponding to λ2 = 5 is { [2; 1] }.
Therefore, the basis for the corresponding eigenspace for the given eigenvalues of the matrix a is { [1; -1] } and { [2; 1] }.
To know more about eigenspace visit:
https://brainly.com/question/28564799
#SPJ11
Of the following substances, which ones are generally soluble in water?
Na3PO4
NaOH
PbI2
K2SO4
AgCl
SnCO3
Of the substances listed, the ones that are generally soluble in water are:
1. Na₃PO₄ (sodium phosphate)
2. NaOH (sodium hydroxide)
3. K₂SO₄ (potassium sulfate)
These compounds are considered soluble in water because they form ions when dissolved, and their ions have a strong affinity for water molecules, resulting in a homogeneous mixture.
The following substances are generally insoluble or have low solubility in water:
1. PbI₂ (lead(II) iodide)
2. AgCl (silver chloride)
3. SnCO₃ (tin(II) carbonate)
These compounds have low solubility in water, meaning that only a small amount of the compound will dissolve in water to form ions.
It's important to note that the solubility of substances can vary depending on factors such as temperature and the presence of other solutes. The solubility of a compound is typically indicated in solubility tables or can be experimentally determined.
Learn more about solubility at https://brainly.com/question/24057916
#SPJ11
At what degree of sloping dose soil erosion begin to taper off
There is no specific threshold or degree of slope steepness at which soil erosion abruptly begins to taper off
Soil erosion is influenced by various factors, including slope steepness, rainfall intensity, soil characteristics, vegetation cover, and land management practices. As slope steepness increases, the potential for soil erosion generally increases due to the gravitational force acting on the eroded materials. However, there is no specific threshold or degree of slope steepness at which soil erosion abruptly begins to taper off. The relationship between slope steepness and soil erosion is generally non-linear. At low slope angles, soil erosion tends to be minimal as the gravitational force is relatively weak. As the slope angle increases, soil erosion typically increases exponentially due to the increased force of gravity. Eventually, as the slope steepness continues to increase, soil erosion may reach a point of maximum potential where the erodibility of the soil and other factors become limiting factors. Beyond this point, the rate of soil erosion may start to taper off, but it does not completely stop. Instead, it may stabilize or decrease slightly compared to the maximum erosion potential observed at steeper slopes.
for more questions on erosion
https://brainly.com/question/13067562
#SPJ8
Determine the volume of H2S (at 375 K and 1.20 atm) needed to produce 37.0 g of S. Assume that there is excess SO2 present.
2 H2S(g) + SO2(g) → 3 S(s) + 2 H2O(g)
The volume of H2S at 375 K and 1.20 atm needed to produce 37.0 g of S is 72.4 L. According to the balanced chemical equation,2 H2S(g) + SO2(g) → 3 S(s) + 2 H2O(g) the stoichiometric coefficient of H2S is 2.
The molar mass of H2S is 2 × 1.0079 + 2 × 32.06 = 34.08 g/mol. The stoichiometric coefficient of S is 3. The molar mass of S is 32.06 g/mol. The number of moles of S required to produce 37.0 g of S is: moles = mass/molar mass = 37.0/32.06 = 1.15 mol. According to the stoichiometry of the equation, 2 moles of H2S is required to produce 3 moles of S.
Therefore,1.15 mol of S would require1.15/3 × 2 = 0.77 mol of H2SWe can use the ideal gas law to determine the volume of gas required n = PV/RTV = nRT/PV = (0.77 × 0.08206 × 375) / 1.20V = 23.7 L (rounded off to 3 significant figures). Therefore, the volume of H2S needed to produce 37.0 g of S is 23.7 L.
To know more about stoichiometric visit:-
https://brainly.com/question/6907332
#SPJ11
the galvanic cell shown below produces an electric current. which statement shown below concerning this galvanic cell must be true?
The galvanic cell shown below produces an electric current. The statement concerning this galvanic cell that must be true is given below. "The oxidation half-reaction occurs at the anode, and the reduction half-reaction occurs at the cathode."
Explanation:A galvanic cell is an electrochemical cell that converts the chemical energy of a spontaneous redox reaction into electrical energy. The electrons move from the anode to the cathode in a galvanic cell.The statement concerning this galvanic cell that must be true is "The oxidation half-reaction occurs at the anode, and the reduction half-reaction occurs at the cathode."
The anode is the electrode where oxidation occurs, whereas the cathode is the electrode where reduction occurs in a galvanic cell.A spontaneous oxidation-reduction reaction occurs in a galvanic cell, and the reaction proceeds due to the transfer of electrons from the anode to the cathode. Therefore, in this galvanic cell, electrons move from the anode to the cathode.
To know more about oxidation visit:
https://brainly.com/question/13182308
#SPJ11
how many ml of 0.050 m cacn2 are needed to make 25.0 ml of 0.010 m solution? the molar mass of cacn2 is 80.11 g/mol.
1. 33.3 mL 2. 0.0188 mL 3. 30.0 mL 4. 12.0 mL 5. 7.50 mL 6. 83.3 mL 7. 63.0 mL
30.0 mL of 0.050 M Ca(CN)2 are needed to make 25.0 mL of 0.010 M solution. Hence, Volume of 0.050 M solution containing 0.00025 mol of Ca(CN)2= 0.00025 / 0.00125 = 0.2 L or 200 mL.
Molarity of Ca(CN)2 solution = 0.050 M Molarity of solution to be made = 0.010 MVolume of solution to be made = 25.0 mLNumber of moles of Ca(CN)2 in 25.0 mL of 0.010 M solution =0.010 * 25.0 / 1000 = 0.00025 molMolar mass of Ca(CN)2 = 80.11 g/mol
Mass of Ca(CN)2 in 0.00025 mol of Ca(CN)2 = 0.00025 * 80.11 = 0.020 m gNumber of moles of Ca(CN)2 in 0.050 M solution = 0.050 * 25.0 / 1000 = 0.00125 mol Therefore, Volume of 0.050 M solution containing 0.020 mg of Ca(CN)2 = (200/1000) * 0.020 = 0.004 mL or 4.0 mL Therefore, Volume of 0.050 M solution containing 20.0 mg of Ca(CN)2 = (4.0/0.020) * 20.0 = 400.0 mL or 0.400 L.
To know more about solution visit:
https://brainly.com/question/15757469
#SPJ11
One way the U.S. Environmental Protection Agency (EPA) tests for chloride contaminants in water is by titrating a sample of silver nitrate solution. Any chloride anions in solution will combine with the silver cations to produce bright white silver chloride precipitate. Suppose an EPA chemist tests a 200. mL sample of groundwater known to be contaminated with iron(II) chloride, which would react with silver nitrate solution like this: feCl_2(aq) + 2 AgNO_3 (aq) rightarrow 2 AgCl(s) + Fe(NO_3)_2(aq) The chemist adds 48.0 mM silver nitrate solution to the sample until silver chloride stops forming, she then washes, dries, and weighs the precipitate. She finds she has collected 8.5 mg of silver chloride. calculate the concentration of iron(II) chloride contaminant in the original groundwater sample. Be sure your answer has the correct number of significant digits.
The concentration of iron(II) chloride contaminant in the original groundwater sample is 109.5 mg/L or 109.5 ppm.
To calculate the concentration of iron (II) chloride contaminant in the original groundwater sample, follow the steps below:
Step 1: Write the balanced chemical equation for the reaction between iron(II) chloride and silver nitrate.feCl2(aq) + 2 AgNO3(aq) → 2 AgCl(s) + Fe(NO3)2(aq)
Step 2: Calculate the moles of silver nitrate used.
The molarity of silver nitrate = 48.0 mM or 0.0480 M
The volume of silver nitrate = 200. mL or 0.200 L
Number of moles of silver nitrate = Molarity × Volume= 0.0480 M × 0.200 L= 0.00960 mol
Step 3: Determine the number of moles of silver chloride formed. The balanced equation shows that 1 mole of iron(II) chloride reacts with 2 moles of silver nitrate to form 2 moles of silver chloride.
Moles of AgCl = (moles of AgNO3 used ÷ 2) = 0.00960 mol ÷ 2= 0.00480 mol
Step 4: Convert moles of silver chloride to mass.
The molar mass of AgCl = 143.32 g/molMass of AgCl = Moles of AgCl × Molar mass= 0.00480 mol × 143.32 g/mol= 0.689 g or 689 mgStep 5: Calculate the concentration of iron(II) chloride in the original groundwater sample.Mass of iron(II) chloride = Mass of AgCl × (1 mol FeCl2 ÷ 2 mol AgCl)× (126.75 g FeCl2 ÷ 1 mol FeCl2)= 689 mg × (1 mol FeCl2 ÷ 2 mol AgCl) × (126.75 g FeCl2 ÷ 1 mol FeCl2)= 21943.625 mg or 21.9 gThe original volume of groundwater sample = 200. mL or 0.200 L
Concentration of iron(II) chloride in the groundwater sample = (Mass of iron(II) chloride ÷ Volume of sample)× (1 L ÷ 1000 mL)= (21.9 g ÷ 0.200 L) × (1 L ÷ 1000 mL)= 109.5 mg/L or 109.5 ppmT
To know more about Molar Mass visit:
https://brainly.com/question/31545539
#SPJ11
how many moles of naoh will react with 1 mole of h2so4 in the below unbalanced reaction?
The below unbalanced reaction equation represents the reaction between H2SO4 and NaOH:$$\text{H}_2\text{SO}_4 + \text{NaOH} \rightarrow \text{Na}_2\text{SO}_4 + \text{H}_2\text{O}$$
We can balance the equation to get the stoichiometry of the reactants and products:$$\text{H}_2\text{SO}_4 + 2\text{NaOH} \rightarrow \text{Na}_2\text{SO}_4 + 2\text{H}_2\text{O}$$We can see that 2 moles of NaOH will react with 1 mole of H2SO4 in the above balanced reaction equation.
To find out how many moles of NaOH will react with 1 mole of H2SO4 in the above unbalanced reaction equation, we need to first balance the equation. The balanced equation is:$$\text{H}_2\text{SO}_4 + 2\text{NaOH} \rightarrow \text{Na}_2\text{SO}_4 + 2\text{H}_2\text{O}$$From the balanced equation.
To know more about equation visit:-
https://brainly.com/question/29657983
#SPJ11
The equilibrium concentrations for a solution of the base B are [B]=1.16 M, [HB+]=6.63×10−3 M, and [OH−]=3.31×10−3 M. What is the Kb for this base? Select the correct answer below: 5.29×104 2.85×10−3 1.89×10−5 350
The base dissociation constant (Kb) for this base is 1.89×10⁻⁵. Therefore, the correct option is (3) 1.89×10⁻⁵.
To determine the base dissociation constant (Kb) for base B, we can use the concentrations of the species involved in the equilibrium reaction and the equilibrium expression for Kb.
The balanced chemical equation for the dissociation of the base B is:
B(aq) + H2O(l) ⇌ HB⁺(aq) + OH⁻(aq)
The Kb expression for this reaction can be written as:
Kb = ([HB⁺][OH⁻]) / [B]
Given the equilibrium concentrations [B] = 1.16 M, [HB⁺] = 6.63×10⁻³ M, and [OH⁻] = 3.31×10⁻³ M, we can substitute these values into the Kb expression:
Kb = (6.63×10⁻³ M)(3.31×10⁻³ M) / (1.16 M)
Kb ≈ 1.89×10⁻⁵
Therefore, the Kb for base B is approximately 1.89×10⁻⁵. The correct answer from the given options is (3) 1.89×10⁻⁵.
Learn more about base dissociation constant: https://brainly.com/question/28197409
#SPJ11
how many grams of solid sodium chloride must be added to 25.0 ml 0.366 m aqueous silver nitrate to completely react with the silver?
To completely react with the silver in a 25.0 ml 0.366 M aqueous silver nitrate solution, approximately 0.268 grams of solid sodium chloride must be added.
In order to determine the amount of solid sodium chloride required for the complete reaction, we need to use the balanced chemical equation for the reaction between sodium chloride (NaCl) and silver nitrate ([tex]AgNO_3[/tex]), which yields silver chloride (AgCl) and sodium nitrate ([tex]NaNO_3[/tex]). The balanced equation is as follows:
[tex]2AgNO_3 + NaCl[/tex] → [tex]2AgCl + NaNO_3[/tex]
From the equation, we can see that 2 moles of silver nitrate react with 1 mole of sodium chloride to produce 2 moles of silver chloride. Since the molarity of the silver nitrate solution is given as 0.366 M, we can calculate the number of moles of silver nitrate present in 25.0 ml (0.0250 L) of the solution using the formula:
moles of silver nitrate = molarity * volume in liters
Substituting the values, we find:
moles of silver nitrate = 0.366 M * 0.0250 L = 0.00915 moles
According to the stoichiometry of the reaction, 2 moles of silver nitrate react with 1 mole of sodium chloride. Therefore, to completely react with the silver, we need half the number of moles of sodium chloride, which is:
moles of sodium chloride = 0.00915 moles / 2 = 0.00458 moles
To convert moles to grams, we use the molar mass of sodium chloride, which is approximately 58.5 g/mol. Thus, the mass of solid sodium chloride needed is:
mass of sodium chloride = moles of sodium chloride * molar mass
= 0.00458 moles * 58.5 g/mol
≈ 0.268 g
Therefore, approximately 0.268 grams of solid sodium chloride must be added to the 25.0 ml 0.366 M aqueous silver nitrate solution to completely react with the silver.
Learn more about solid sodium chloride here:
https://brainly.com/question/11111784
#SPJ11
for question corndog draw the skeletal structure of the major organic product when given the grignard reacts with a formaldehyde
The Grignard reagent reacts with formaldehyde to produce secondary alcohols. A Grignard reagent reacts with formaldehyde to form secondary alcohols. It will lead to the formation of 2° alcohols with the molecular formula R2CHOH.
The skeletal structure of the major organic product when given the Grignard reacts with formaldehyde is given below: Grignard reagent: RMgXFormaldehyde: H2CO Skeletal structure of the product: R2CHOH Steps involved in the synthesis of the product The Grignard reagent is prepared by the reaction between an alkyl halide and magnesium. RMgX is the product of this reaction.
Next, add formaldehyde to the RMgX.3. Add an aqueous acid solution to the reaction mixture to stop the reaction.4. The product is then extracted by using an organic solvent such as diethyl ether or chloroform.The resulting product is a secondary alcohol with the formula R2CHOH.
To know more about formaldehyde visit :
https://brainly.com/question/29797593
#SPJ11
as of 2007, what is the maximum efficiency of a multijunction solar cell?
As of 2007, the maximum efficiency of a multijunction solar cell was 40.7%. Multijunction solar cells are a type of solar cell that has several p-n junctions that help to enhance the efficiency of the cell.
In 2007, the National Renewable Energy Laboratory (NREL) announced that they had achieved a maximum efficiency of 40.7% for a multijunction solar cell. This was achieved by using three different semiconducting layers, each with a different bandgap energy.
The efficiency of these cells has continued to increase, and they are now used in a variety of applications, including space satellites and concentrator photovoltaics. The explanation provided explains the working of the multijunction solar cells and their advantages over the single junction solar cells. The explanation also includes the maximum efficiency of multijunction solar cells and how they are used in different applications.
To know more about multijunction visit:
https://brainly.com/question/1882888
#SPJ11
what is the minimum amount of 5.6 m h2so4 necessary to produce 25.6 g of h2(g) according to the following reaction?
The given balanced chemical equation for the reaction is: H2SO4 + 2Al → Al2(SO4)3 + H2Here, it can be observed that 1 mole of H2SO4 reacts with 2 moles of Al to produce 1 mole of H2 gas.
Therefore, the stoichiometric ratio of H2SO4 to H2 is 1:1.The molar mass of H2 is 2 g/mol. So, the number of moles of H2 produced is given by: n(H2) = mass of H2 / molar mass of H2= 25.6 / 2= 12.8 mol.
Therefore, the number of moles of H2SO4 required is also 12.8 mol, as the stoichiometric ratio is 1:1. The given concentration of H2SO4 is 5.6 M, which means that there are 5.6 moles of H2SO4 in 1 L of solution.
Thus, the volume of 5.6 M H2SO4 required can be calculated as follows: volume of H2SO4 = moles of H2SO4 / molarity= 12.8 / 5.6= 2.29 L.
So, the minimum amount of 5.6 M H2SO4 necessary to produce 25.6 g of H2 gas is 2.29 L.
To know more about stoichiometric ratio visit
https://brainly.com/question/6907332
#SPJ11
Determine the value of AG for a reaction at 25°C which has an equilibrium constant of 20.2. -7.567 kJ/mol See Hint Part 2 (1 pt) Calculate AGfor the reaction below at 25°C when 2.50 atm of A and 5.70 atm of Bare present. AG° = +5.44 kJ/mol for this reaction. A(g) = 2B(8) kJ/mol
The Gibbs free energy change (ΔG) can be calculated using the formula ΔG° = -RTlnK, the value of ΔG for the reaction at 25°C is approximately -4.83 kJ/mol.
Value of K is 20.2, and the temperature is 25°C or 298 K. Thus, we can calculate the standard Gibbs free energy change (ΔG°) as follows:ΔG° = -RTlnK= -(8.314 J/mol K)(298 K)ln(20.2)= -35,380.2 J/mol≈ -35.4 kJ/mol We can also calculate the Gibbs free energy change (ΔG) at non-standard conditions using the formula ΔG = ΔG° + RTln(Q), where Q is the reaction quotient.
The given reaction is A(g) ⇌ 2B(g), and the value of ΔG° is +5.44 kJ/mol. The reaction quotient Q can be calculated using the partial pressures of A and B as follows: Q = (PA) / (PB)2= (2.50 atm) / (5.70 atm)2≈ 0.15Substituting these values into the formula for ΔG gives:ΔG = ΔG° + RTln(Q)= (+5.44 kJ/mol) + (8.314 J/mol K)(298 K)ln(0.15)= -4,828.2 J/mol≈ -4.83 kJ/mol.
To know more about reaction visit:
https://brainly.com/question/30464598
#SPJ11
Explain Galvanic Cells and Cell Potential Question For the following galvanic cell: Al (s) | Al3+(aq, 1 M) II Zn2+(aq, 1 M) | Zn(s) Which of the following species is the cathode? Select all that apply:
A. Zn
B. Zn2+
C. Al
D. Al3+
Galvanic cell: Galvanic cells are electrochemical cells that spontaneously generate electricity through redox reactions. The redox reaction takes place at two different electrodes, with electrons being transferred from one electrode to the other.
Galvanic cells are commonly used in batteries that power everyday objects like cell phones and laptops, as well as in larger industrial applications like generating electricity from fuel cells. Cell potential: Cell potential is the measure of the potential difference between two electrodes of a galvanic cell. It is a measure of the ability of a cell to generate electrical energy. The cell potential is dependent on the concentration of ions in the solution, the temperature, and the nature of the electrodes used.
In the case of the given galvanic cell, Al (s) | Al3+(aq, 1 M) II Zn2+(aq, 1 M) | Zn(s), the cell potential can be calculated using the following formula: E cell = E cathode - E anode E cell = Cell potential E cathode = Cathode potential E anode = Anode potential In the given galvanic cell, Zn2+ is reduced to Zn at the cathode, and Al3+ is oxidized to Al at the anode. Therefore, Zn is the cathode. Species that are cathode:ZnZn2+Therefore, the correct answer is:A. ZnB. Zn2+.
To know more about electrodes refer to:
https://brainly.com/question/17362810
#SPJ11
based on their molecular structure, identify the stronger acid from each pair of oxyacids.
Explain your reasoning.
1. H2SO4 or H2SO3
2.HClO2 or HClO
3.HClO or HBrO
4.CCl3COOH or CH3COOH
[tex]H_2SO_4[/tex] is a stronger acid than[tex]H_2SO_3, HClO_2[/tex] is a stronger acid than HClO, HBrO is a stronger acid than HClO and [tex]CH_3COOH[/tex] is a stronger acid than [tex]CCl_3COOH[/tex].
The oxyacid with the stronger acidity would be the one that has the lower pKa value. Oxyacid's are composed of a central atom, which is bonded to oxygen atoms and one or more hydroxide ions, and these oxygen atoms can donate the protons, making them acidic.
1.[tex]H_2SO_4 or H_2SO_3[/tex]
The molecular structure of [tex]H_2SO_4[/tex] is ; This oxyacid has two hydroxyl groups, which means that it can donate two protons, which increases its acidity. As a result, it has a lower pKa value than [tex]H_2SO_3[/tex] . Hence, [tex]H_2SO_2[/tex] is a stronger acid than [tex]H_2SO_3[/tex]
2. [tex]HClO_4[/tex] or HClO
The molecular structure of [tex]HClO_2[/tex] is ;This oxyacid has two oxygen atoms, which donate protons, while HClO has only one oxygen atom. As a result, [tex]HCl_2[/tex] is more acidic than HClO. Therefore, HClO2 is a stronger acid than HClO.
3. HClO or HBrO
The molecular structure of HClO is :This oxyacid has a weaker acidity than HBrO due to the larger atomic radius of the bromine atom. As a result, the bond strength between the hydrogen and the bromine atom in HBrO is weaker than in HClO. Hence, HBrO is a stronger acid than HClO.
4. [tex]CCl_3COOH[/tex]. or CH3COOH
The molecular structure of [tex]CCl_3COOH[/tex] is ;The presence of chlorine atoms makes the molecule more electronegative, which makes it harder to lose a proton. As a result, [tex]CCl_3COOH[/tex]. is more acidic than [tex]CCl_3COOH[/tex].. Therefore, [tex]CCl_3COOH[/tex]. is a stronger acid than [tex]CCl_3COOH[/tex].
In conclusion , [tex]H_2SO_4[/tex] is a stronger acid than[tex]H_2SO_3, HClO_2[/tex] is a stronger acid than HClO, HBrO is a stronger acid than HClO and [tex]CH_3COOH[/tex] is a stronger acid than [tex]CCl_3COOH[/tex].
To know more about Acid refer here :
https://brainly.com/question/25148363
#SPJ11
