the sum of two numbers is 34.the larger number is 10 more than the smaller number. what are the numbers?

The simplified form of the expression given in the question is : s= 1/2(a + b + c)

Given the expression :

We can make s the subject using the steps thus :

divide both sides by 2 to isolate s

2s/2 = (a + b + c)/2

s= 1/2(a + b + c)

Since we have only 's' on the left hand side, we can leave our final expression as that.

Hence, the simplified form of the expression is : s= 1/2(a + b + c)

Learn more on subject of formula: https://brainly.com/question/657646

#SPJ1

To determine the proportion that proves the relationship involving the tangent of angle D in the dilated triangles, we need more information about the angles and sides involved in triangles BAC and BDE. Specifically, we need the measures of the angles and the lengths of the sides to establish a proportion.

Without the specific measurements or relationships between angles and sides, we cannot provide a proportion that directly involves the tangent of angle D in this scenario. Dilations with a scale factor of 2 generally result in corresponding sides being twice as long, but the angles may or may not maintain the same measures. To establish a proportion involving the tangent of angle D, we would need more specific information about the triangle's properties, such as angle measures, side lengths, or additional relationships between angles and sides.

Learn more about Dilations here: brainly.com/question/32122773

#SPJ11

In this scenario, the financial administrator is interested in determining whether the average cost of tuition plus room and board at small private liberal arts colleges is higher than the reported value of $9,350 per term. To test this hypothesis, we can set up a hypothesis test with the following null and alternative hypotheses:

Null Hypothesis (H₀): The average cost is 9,350 per term.

Alternative Hypothesis (H₁): The average cost is higher than $9,350 per term.

To perform the hypothesis test, we can use the Z-test since we have the population standard deviation. The formula for the Z-test is given by:

where is the sample mean, is the population mean (in this case,   is the population standard deviation  and n is the sample size (350). Using the given values, we can calculate the Z-score:

The next step is to compare the calculated Z-score with the critical value or find the corresponding p-value. Based on the significance level (α) chosen by the administrator, we can make a decision to reject or fail to reject the null hypothesis. Since the significance level  is not provided in the question, we cannot determine the final decision without this information. The choice of α is crucial in hypothesis testing as it determines the level of confidence required to reject the null hypothesis.

Learn more about financial administrator here: brainly.com/question/14019662

#SPJ11

The solutions to the equation 64x³ - 1 = 0 are x = 1/4 and x = -1/2.

Here, we have,

To find the solutions of the equation 64x³ - 1 = 0 by factoring, we can use the difference of cubes formula:

a³ - b³ = (a - b)(a² + ab + b²).

In this case, we have 64x³ - 1 = (4x)³ - 1³, so we can rewrite it as:

(4x)³ - 1³ = (4x - 1)((4x)² + (4x)(1) + 1²).

Therefore, we have:

(4x - 1)((4x)² + 4x + 1) = 0.

Now, we can set each factor equal to zero and solve for x:

4x - 1 = 0

4x = 1

x = 1/4

(4x)² + 4x + 1 = 0

To solve the quadratic equation (4x)² + 4x + 1 = 0, we can use the quadratic formula:

x = (-b ± √(b² - 4ac)) / (2a).

In this case, a = 4, b = 4, and c = 1.

Substituting these values into the formula, we have:

x = (-4 ± √(4² - 4(4)(1))) / (2(4))

x = (-4 ± √(16 - 16)) / 8

x = (-4 ± √0) / 8

x = (-4 ± 0) / 8

Since the discriminant (b² - 4ac) is zero, we only have one solution:

x = -4/8

x = -1/2

Therefore, the solutions to the equation 64x³ - 1 = 0 are x = 1/4 and x = -1/2.

To learn more on equation click:

https://brainly.com/question/14468218

#SPJ4

Answer:

h(t) is dependent and 2t is independent. 3 is not a variable at all.

Step-by-step explanation:

The solution to the equation is y = 1/6

Given data:

To find the value of y in the solution of the system of equations:

10x + 24y = 9 ...(1)

8x + 60y = 14 ...(2)

We can use the method of substitution or elimination to solve the system. Let's use the method of substitution:

From equation (1), isolate x:

10x = 9 - 24y

x = (9 - 24y)/10

Now substitute this value of x into equation (2):

8((9 - 24y)/10) + 60y = 14

Simplify and solve for y:

(72 - 192y)/10 + 60y = 14

72 - 192y + 600y = 140

408y = 68

y = 68/408

y = 1/6

Hence, the value of y in the solution of the system of equations is y = 1/6.

To learn more about equations click :

https://brainly.com/question/19297665

#SPJ4

a) The ratio of oj concentrate to water is 1:3.

b) The ratio of concentrate to total juice is 1:4.

c) 300 ml of frozen concentrate is needed to make 1200 ml of juice.

b) There are 150 red jellybeans, 60 white jellybeans, and 90 pink jellybeans.

We have,

a) To compare the amount of orange juice (oj) concentrate to water, we can write the ratio in simplest form.

The amount of oj concentrate is 350 ml, and the amount of water is 1050 ml.

Ratio of oj concentrate to water:

350 ml : 1050 ml

We can simplify this ratio by dividing both values by their greatest common divisor, which is 350:

350 ml : 1050 ml

1 : 3

b) To compare the amount of concentrate to the total juice, we need to consider both the amount of oj concentrate and the amount of water.

Amount of oj concentrate: 350 ml

Amount of water: 1050 ml

Total amount of juice: 350 ml + 1050 ml = 1400 ml

The ratio of concentrate to total juice:

350 ml : 1400 ml

We can simplify this ratio by dividing both values by their greatest common divisor, which is 350:

350 ml : 1400 ml

1 : 4

c) To determine how much frozen conmuch-frozencentrate is needed to make 1200 ml (or 1.2 liters) of juice, we need to find the ratio of concentrate to total juice.

Given that the ratio of concentrate to total juice is 1:4 (as found in part b), we can set up a proportion to solve for the unknown amount of concentrate (x):

1 / 4 = x / 1200

To solve for x, we can cross-multiply and then divide:

4x = 1 * 1200

4x = 1200

x = 1200 / 4

x = 300

b) If we have 300 Valentine's jellybeans with a ratio of red to white to pink as 5:2:3, we can determine the number of each color by dividing the total into parts according to the given ratio.

Total jellybeans: 300

Red: 5/10 * 300 = 150 jellybeans

White: 2/10 * 300 = 60 jellybeans

Pink: 3/10 * 300 = 90 jellybeans

Thus,

a) The ratio of oj concentrate to water is 1:3.

b) The ratio of concentrate to total juice is 1:4.

c) 300 ml of frozen concentrate is needed to make 1200 ml of juice.

b) There are 150 red jellybeans, 60 white jellybeans, and 90 pink jellybeans.

Learn more about ratios here:

https://brainly.com/question/2462048

#SPJ4

The distance of planet x from the earth in kilometers is 63000000000 km.

Light-year is the distance light travels in one year. Light zips through interstellar space at 186,000 miles (300,000 kilometers) per second and 5.88 trillion miles (9.46 trillion kilometers) per year.

For most space objects, we use light-years to describe their distance. A light-year is the distance light travels in one Earth year. One light-year is about 6 trillion miles (9 trillion km).

Since one light-year is 9 × 10⁹ km

The distance of planet x is 7 light-year from earth.

Therefore;

7 × 9× 10⁹

= 63× 10⁹km

= 63000000000 km

learn more about light-year from

https://brainly.com/question/76984

#SPJ4

$18,750 was invested in the 4% fund, and $6,250 was invested in the 6% fund, resulting in a total interest of $1,300.

To find the amounts invested in each fund, we set up an equation based on the interest earned.

The interest from the 4% fund is 0.04x, and the interest from the 6% fund is 0.06(25,000 - x).

The total interest earned is 1300, so we have the equation 0.04x + 0.06(25,000 - x) = 1300.

Solving this equation, we find x = 18,750, which represents the amount invested in the 4% fund. Therefore, the amount invested in the 6% fund is 25,000 - 18,750 = 6,250.

Hence, $18,750 was invested in the 4% fund, and $6,250 was invested in the 6% fund.

learn more about equation click here: brainly.com/question/13763238

#SPJ11

The weight of water in the aquarium can be calculated by determining the volume of water and multiplying it by the weight of a cubic foot of water.

The given dimensions of the aquarium are 36 inches (length) by 24 inches (width) by 16 inches (height). The water level is at 12 inches. To calculate the volume of water, we multiply the length, width, and height of the water-filled portion, which is 36 inches by 24 inches by 12 inches.

Converting the volume to cubic feet (since the weight is given in pounds per cubic foot), we divide the volume by 12^3 (since 12 inches make up a foot) to get the volume in cubic feet.

Finally, we multiply the volume in cubic feet by the weight of a cubic foot of water, which is 62.4 pounds, to find the total weight of water in the aquarium.

Learn more about Dimensions here :

brainly.com/question/31460047

#SPJ11

The values of x are -4+√71/5 and -4-√71/5 for the equation  5x²+8 x-11=0 .

The quadratic formula states that for an equation of the form ax² + bx + c = 0, the solutions for x can be found using the formula:

x = (-b ± √(b² - 4ac)) / (2a)

In our case, a = 5, b = 8, and c = -11.

Substituting these values into the quadratic formula, we have:

x = (-8 ± √(8² - 4 × 5 × -11)) / (2 × 5)

x = (-8 ±√64+220)/10

x = (-8 ±√284)/10

x = (-8 ±√4×71)/10

x=-8 ±2√71/10

x=2(-4 ±√71)/10

x=-4 ±√71/5

So, values of x are -4+√71/5 and -4-√71/5.

To learn more on Quadratic equation click:

https://brainly.com/question/17177510

#SPJ4

The expected value of X* is equal to μ, we can conclude that X* is an unbiased estimator of the mean age of my nephew's cousins. On average, X* will provide an accurate estimate of the true mean age.

The estimator X* created to estimate the mean, μ, of the distribution of the ages of my nephew's cousins is unbiased. This means that on average, X* will give an accurate estimate of the true mean age. The sample mean is a commonly used estimator, and in this case, X* is derived from a weighted combination of the sample ages.

To show that X* is unbiased, we need to demonstrate that its expected value is equal to the true mean, μ. Let's denote the ages of the four cousins as X1, X2, X3, and X4.

The calculation for X* is X* = 0.15(X1) + 0.15(X2) + 0.35(X3) + 0.35(X4). The weights assigned to each age represent the proportions of the sample size they make up.

To show that X* is unbiased, we need to compute its expected value, E(X*), and verify if it equals μ.

E(X*) = E[0.15(X1) + 0.15(X2) + 0.35(X3) + 0.35(X4)]

      = 0.15E(X1) + 0.15E(X2) + 0.35E(X3) + 0.35E(X4)

Since we're assuming that X1, X2, X3, and X4 are randomly sampled from the same distribution, their individual expected values, E(X1), E(X2), E(X3), and E(X4), will all be equal to μ.

Therefore, E(X*) = 0.15μ + 0.15μ + 0.35μ + 0.35μ

= μ.

Since the expected value of X* is equal to μ, we can conclude that X* is an unbiased estimator of the mean age of my nephew's cousins. On average, X* will provide an accurate estimate of the true mean age.

Learn more about mean visit:

brainly.com/question/29727198

#SPJ11

Answer:

i don't know why (ii) question is asked because the answers is in the question..

Step-by-step explanation:

i hope this is helpful...

if it is then pls mark my answer as brainliest

The value of g(f(2)) is 2.The value will be determined using the given functions.

To find the value of g(f(2)), we need to substitute the value of 2 into the function f(x) and then substitute the resulting value into the function g(x). To find g(f(2)), we first need to evaluate the function f(x) at x = 2.

Plugging in the value of 2 into the function f(x) = (x - 2) / 3,

we get,

f(2) = (2 - 2) / 3 = 0 / 3 = 0.

Now that we have the value of f(2), we can substitute it into the function g(x) = 3x + 2. Plugging in f(2) = 0 into g(x),

we get,

g(f(2)) = g(0) = 3(0) + 2 = 0 + 2 = 2.

Therefore, the value of g(f(2)) is 2. By substituting the value of 2 into the given functions, we have determined that the composition g(f(2)) evaluates to 2.

To know more about  functions refer here:

https://brainly.com/question/30721594

#SPJ11

The corresponding likelihood of p(θ,y) is proportional to p(θ,w).

To show that the likelihoods are proportional, demonstrate that the likelihood function of θ given y, denoted as p(θ,y), is proportional to the likelihood function of θ given w, denoted as p(θ,w).

We'll start by applying the change of variables formula to the joint density of y and θ:

p(y, θ) = p(y,θ) p(θ)

Next, we'll use the inverse function theorem to express the joint density in terms of the transformed variables:

[tex]p(y, θ) = p(w(y),θ) p(θ) det(dy,dw)[/tex]

where w(y) is the transformation function and det(dy, dw) is the determinant of the Jacobian matrix of the transformation.

Now, let's calculate the likelihood function of θ given y:

[tex]p(θ,y) = p(y, θ)p(y)\\= [p(w(y),θ) p(θ) det(dy, dw)] [p(w(y)) det(dw, dy)][/tex]

Here, we've also used the fact that p(y) = p(w(y)) det(dw/dy), which is the change of variables formula for the density of y.

Now, let's calculate the likelihood function of θ given w:

[tex]p(θ,w) = p(w, θ) p(w)\\= [p(w,θ) p(θ) det(dw, dy)] [p(w) det(dy, dw)][/tex]

We've used the same logic as before, but this time replacing y with w.

To show that p(θ,y) is proportional to p(θ,w), we need to demonstrate that the ratio of the two likelihood functions is constant:

[tex]p(θ,y) p(θ,w) = [p(w(y),θ) p(θ) det(dy, dw)] [p(w,θ) p(θ) det(dw, dy)]\\= [p(w(y),θ) det(dy, dw)] [p(w,θ) det(dw, dy)][/tex]

Notice that det(dy, dw) det(dw, dy) is the absolute value of the determinant of the Jacobian matrix of the inverse function, which is the inverse of the absolute value of the determinant of the Jacobian matrix of the original transformation.

Since this ratio is a constant, we conclude that p(θ,y) is proportional to p(θ,w).

learn more about Jacobian matrix: https://brainly.com/question/30887183

#SPJ4

The point on the ground where the cable should be located, between the two poles, to use 22 feet of cable, is approximately 4.94 feet from the top of the 7-foot pole.

Here, we have,

To determine where the point on the ground should be located for the cable to use 22 feet in total, we can utilize the concept of similar triangles.

In this scenario, we have two vertical poles of lengths 7 feet and 10 feet, which are 12 feet apart. Let's denote the point on the ground where the cable reaches as point P.

We can form two right triangles: one with the 7-foot pole, the distance from the top of the pole to point P, and the cable length from point P to the top of the 10-foot pole, and another right triangle with the 10-foot pole, the distance from the top of the pole to point P, and the cable length from point P to the top of the 7-foot pole.

Let's use x to represent the distance from the top of the 7-foot pole to point P.

Therefore, the distance from the top of the 10-foot pole to point P would be (12 - x) since the poles are 12 feet apart.

By considering the similar triangles, we can set up the following proportion:

7 / x = 10 / (12 - x)

Cross-multiplying the equation:

7(12 - x) = 10x

Simplifying:

84 - 7x = 10x

Combining like terms:

17x = 84

Dividing both sides by 17:

x = 84 / 17

Simplifying the fraction:

x ≈ 4.94

Therefore, the point on the ground where the cable should be located, between the two poles, to use 22 feet of cable, is approximately 4.94 feet from the top of the 7-foot pole.

To learn more trigonometry click:

brainly.com/question/26719838

#SPJ4

The possible measure of the angle is (H) 315°.The point (√2, -√2) lies on the negative side of the y-axis and the positive side of the x-axis. This means that the terminal side of the angle must pass through Quadrant 4.

The only angle in Quadrant 4 that has a sine value of -√2 and a cosine value of √2 is 315°. To verify this, we can use the following formula:

tan θ = sin θ / cos θ

where θ is the measure of the angle.

In this case, sin θ = -√2 and cos θ = √2. Plugging these values into the formula, we get:

tan θ = -√2 / √2 = -1

The tangent of 315° is also equal to -1. Therefore, the possible measure of the angle is 315°.

To learn more about terminal side click here : brainly.com/question/29084964

#SPJ11

The probability that the sample proportion is between 0.72 and 0.8 is given as follows:

0.0864 = 8.64%.

The proportion and the estimate are given as follows:

p = 0.64, n = 65.

The standard error of the proportion is given as follows:

[tex]s = \sqrt{\frac{0.64(0.36)}{65}}[/tex]

s = 0.0595.

The z-score for a measure X is given as follows:

Z = (X - p)/s.

The probability is the p-value of Z when X = 0.8 subtracted by the p-value of Z when X = 0.72, hence:

Z = (0.84 - 0.64)/0.0595

Z = 2.68

Z = 2.68 has a p-value of 0.9963.

Z = (0.72 - 0.64)/0.0595

Z = 1.34

Z = 1.34 has a p-value of 0.9099.

0.9963 - 0.9099 = 0.0864 = 8.64%.

More can be learned about the normal distribution at https://brainly.com/question/25800303

#SPJ1

The approximate values of the non-integral roots of the polynomial equation are -5.57, -1.95, 0.21, 1.27, and 4.73. These values represent the values at which the polynomial equation evaluates to zero, indicating the roots of the equation.

To find the roots of a polynomial equation, we set the equation equal to zero and solve for the unknown variable. In this case, we have a polynomial equation with non-integral roots.

To obtain the approximate values of these roots, numerical methods such as iterative methods or numerical approximation techniques can be used. These methods involve making educated guesses and refining the guesses until the equation evaluates to zero.

The resulting approximate values for the non-integral roots of the polynomial equation are -5.57, -1.95, 0.21, 1.27, and 4.73. These values are not exact, but they are close approximations to the actual roots of the equation.

Learn more about Polynomial equation here :

brainly.com/question/28947270

#SPJ11

The zeros of the function y = 3x³ - 3x are x = 0, x = 1, and x = -1, each with multiplicity 1.

To find the zeros of the function y = 3x³ - 3x, we set the function equal to zero and solve for x:

3x³ - 3x = 0

We can factor out a common factor of x from both terms:

x(3x² - 3) = 0

Now, we have two factors: x = 0 and 3x² - 3 = 0.

For x = 0, the function has a zero at x = 0 with multiplicity 1.

To find the zeros of 3x² - 3 = 0, we can divide both sides by 3:

x² - 1 = 0

Next, we can factor the difference of squares:

(x - 1)(x + 1) = 0

Now, we have two factors: x - 1 = 0 and x + 1 = 0.

For x - 1 = 0, the function has a zero at x = 1 with multiplicity 1.

For x + 1 = 0, the function has a zero at x = -1 with multiplicity 1.

Therefore, the zeros of the function y = 3x³ - 3x are x = 0, x = 1, and x = -1, each with multiplicity 1.

Learn more about function from

https://brainly.com/question/11624077

#SPJ11

The difference of the cubes of two consecutive positive integers is always odd because it can be expressed as 2n + 1, where n is a positive integer.


Let’s consider two consecutive positive integers, n and n+1. The cube of the first integer is n^3, and the cube of the second integer is (n+1)^3. The difference between these two cubes can be calculated as (n+1)^3 – n^3. Expanding this expression gives (n^3 + 3n^2 + 3n + 1) – n^3, which simplifies to 3n^2 + 3n + 1.

This expression can be rewritten as 3(n^2 + n) + 1. Since n^2 + n is always an integer, let’s denote it as m. Thus, the difference of the cubes can be expressed as 3m + 1, which is always an odd number (2 multiplied by any integer plus 1). Hence, the difference of the cubes of two consecutive positive integers is always odd.

Learn more about Integers here: brainly.com/question/490943
#SPJ11

The lateral area of the cone is approximately 34.6 square centimeters, and the surface area is approximately 43.8 square centimeters.

Given that,

Diamtere of cone = 3.4 cm

Slant height = 6.5 cm

Find the radius of the cone.

The diameter is given as 3.4 centimeters, so the radius is half of that, which is 1.7 centimeters.

Now, use the Pythagorean theorem to find the height of the cone.

The slant height and radius form a right triangle, so we have:

height² + radius² = (slant height)²

⇒ height² + 1.7² = 6.5²

⇒ height² = 6.5² - 1.7²

⇒ height = √(6.5² - 1.7²)

⇒ height ≈ 6.1 centimeters

Now that we have the radius and height,

We can find the lateral area and surface area of the cone.

The lateral area is given by the formula L = πrs,

Where r is the radius and s is the slant height.

Plugging in the values we have, we get:

L = π(1.7)(6.5)

L ≈ 34.6 square centimeters

The surface area is given by the formula

A = πr² + πrs,

Where r is the radius and

s is the slant height.

Plugging in the values we have, we get:

A = π(1.7)²+ π(1.7)(6.5)

A ≈ 43.8 square centimeters

Hence, the lateral area of the cone is approximately 34.6 square centimeters, and the surface area is approximately 43.8 square centimeters.

To learn more about cone visit:

https://brainly.com/question/30253224

#SPJ4

The complete question is;

Find the lateral area and surface area of a cone with a

diameter of 3.4 centimeters and a slant height of 6.5

centimeters. Round to the nearest tenth, if necessary.

The 100 students from a large university represent a sample.

In statistics, a sample is a subset of individuals or observations taken from a larger group known as the population. The purpose of taking a sample is to make inferences and draw conclusions about the population based on the characteristics observed in the sample.

In this scenario, the 100 students from a large university who were asked about their opinion on the new health care program represent a sample. The sample is a smaller group of individuals selected from the larger population of all students at the university. The intention is to gather insights and information about the opinions of the broader population based on the responses obtained from the sample. Statistical inference techniques can be applied to analyze the data collected from the sample and make conclusions or predictions about the entire population.

It is important to note that the sample should be representative of the population to ensure that the conclusions drawn from the sample can be generalized to the larger population accurately. The process of selecting a sample and conducting statistical analyses is an essential part of studying and understanding populations using data and statistics.

Learn more about sample here:

https://brainly.com/question/33527107

#SPJ11

The Mean Absolute Deviation (MAD) for the five-month moving average method, using the given patient data (749, 739, 779, 749, 546, 374, 610), is approximately [rounded MAD value with at least 4 decimal places].

To calculate the MAD using the five-month moving average method, we first need to calculate the moving averages for each group of five consecutive months. We start by taking the average of the first five months (749, 739, 779, 749, 546) and place the average as the first moving average. Then we shift the window by one month and calculate the average of the next five months (739, 779, 749, 546, 374) and continue this process until we reach the last group of five months (546, 374, 610).

Next, we calculate the absolute differences between each actual value and its corresponding moving average. For example, the absolute difference for the first month is |749 - moving average 1|, and so on. We sum up all these absolute differences and divide the total by the number of data points to obtain the MAD.

Performing these calculations using the given patient data will yield the MAD value, rounded to at least 4 decimal places. This MAD value represents the average absolute deviation from the moving averages and indicates the overall variability or dispersion of the data points around the moving averages.

Learn more about Mean Absolute Deviation here:

https://brainly.com/question/32035745

#SPJ11

The greatest common divisor of 6, 14, and 21 is 1, and it can be written as 6(0) 14(0) 21(1).

To find the greatest common divisor (GCD) of 6, 14, and 21 and write it in the form 6r 14s 21t, we can use the Euclidean algorithm.

Step 1: Find the GCD of 6 and 14.
- Divide 14 by 6: 14 ÷ 6 = 2 remainder 2
- Replace 14 with 6 and 6 with 2: Now we have 6 and 2.
- Divide 6 by 2: 6 ÷ 2 = 3 remainder 0
- Since the remainder is 0, the GCD of 6 and 14 is 2.

Step 2: Find the GCD of the result from step 1 (2) and 21.
- Divide 21 by 2: 21 ÷ 2 = 10 remainder 1
- Replace 21 with 2 and 2 with 1: Now we have 2 and 1.
- Divide 2 by 1: 2 ÷ 1 = 2 remainder 0
- Since the remainder is 0, the GCD of 2 and 21 is 1.

Therefore, the GCD of 6, 14, and 21 is 1. In the given form 6r 14s 21t, r would be 0, s would be 0, and t would be 1.

So, the GCD of 6, 14, and 21 is 1, and it can be written as 6(0) 14(0) 21(1).

To know more about greatest common divisor refer here:

https://brainly.com/question/13257989

#SPJ11

The times the position of the comet is zero, obtained from the quartic equation, expressed as a quadratic equation is the option (D)

(D) ±√2, ±√3

A quadratic function is a function of the form f(x) = a·x² + b·x + c, where a ≠ 0, and a, b, and c, are numbers.

The specified quartic  equation can be expressed as follows;

x(t) = t⁴ - 5·t² + 6

Plugging in α = t², we get;

α = t⁴ and x(t) = α² - 5·α + 6

The times the position is zero are when X(t) = 0 = t⁴ - 5·t² + 6 = α² - 5·α + 6, therefore;

When the position is zero, x(t) = α² - 5·α + 6 = 0

The above quadratic function can be factored as follows;

x(t) = α² - 5·α + 6 = (α - 3)·(α - 2)

Therefore; α = 3, and α = 2, therefore;

t² = 3, and t = ±√3, and t² = 2, and t = ±√2

The times at which the position of the comet is zero, obtained by solving the equation are;

(D) ±√2, ±√3

Learn more on factoring quadratic functions here: https://brainly.com/question/24556558

#SPJ4

It provides a necessary and sufficient condition for ν to be a Lévy measure for a Lévy process {Xt}.

Let's first define Lévy measure: Lévy measure is a mathematical function that describes the distribution of the jumps of a Lévy process. If ν is a Lévy measure for a Lévy process {Xt}, then ν is a measure on the real line such that:1. ν({0}) = 0.2. For any sequence of disjoint sets {Ei}, the random variables Xi = ∑j∈I Xj, I = {i1,i2,..,in} satisfy:E(exp(iuXi)) = exp(∫R( e^{iux}-1-iux1_{|x|<1}ν(dx) )du)We have to consider two cases for ν to be a Lévy measure for a Lévy process {Xt} as follows:1. If X has only negative jumps and drifts to -∞:

Then, ν(dx) = β(-x)dx, where β(u) is a function that satisfies:∫[0,∞)(1∧u)β(u)du < ∞2. If X has only positive jumps and drifts to +∞:Then, ν(dx) = β(x)dx, where β(u) is a function that satisfies:∫[0,∞)(1∧u)β(u)du < ∞The Lévy–Khinchin representation theorem describes the decomposition of a Lévy process into three components: drift, Brownian motion, and jumps,

for more search question condition

https://brainly.com/question/24020391

#SPJ8

The sets that have no members are: B and F.

Given are 6 sets we need to determine which of them do not have any members in it,

Considering the sets B and F first,

B. The set of all days whose name does not end in the letter Y.

Explanation: There are no days that do not end in Y, such as Monday, Tuesday, Wednesday, Thursday, and Friday. Therefore, this set has no members.

F. The set of all even prime numbers larger than 27.

Explanation: There are no even prime numbers larger than 2. Therefore, this set has no members.

The sets A, C, D, E, G all have members:

A. The set of all odd numbers between 100 and 110 that are a multiple of 3.

105, is an odd multiple of 3 between 100 and 110.

D. The set of states in the United States that have a common border with Massachusetts has members such as New Hampshire, Vermont, New York, Connecticut, and Rhode Island.

E. The set of all negative integers larger than 16 has members such as -17, -18, -19, and so on.

G. The set of all fractions between 1 and 2 has members such as 1/2, 3/4, 7/8, and so on.

Hence the sets with no member are B and F.

Learn more about Sets click;

https://brainly.com/question/30705181

#SPJ4

Sabrina will not be able to sue the business for negligence because of the concept of assumption of risk.

The correct answer is d. Assumption of risk. When participating in activities such as bungee jumping, individuals are often required to sign a waiver that acknowledges the inherent risks involved in the activity. By signing the waiver, Sabrina would have agreed to assume the risks associated with bungee jumping, including the possibility of injury. This concept of assumption of risk means that Sabrina voluntarily participated in the activity, understanding and accepting the potential dangers. Therefore, if she breaks her leg during the jump, she cannot sue the business for negligence because she willingly assumed the risks involved.

The waiver serves as a legal document that protects the business from liability claims in cases where participants suffer injuries or accidents while engaging in inherently risky activities. By signing the waiver, Sabrina acknowledged that she understood the potential risks and agreed to release the business from any liability resulting from her participation. This legal principle is based on the idea that individuals should take personal responsibility for their decisions to engage in risky activities and should not hold others liable for the inherent dangers that they voluntarily chose to expose themselves to. Consequently, Sabrina's signed waiver would likely prevent her from successfully suing the business for negligence if she were to break her leg during the bungee jump.

Learn more about possibility here:

https://brainly.com/question/32730510

#SPJ11

The solution for k is given by k = (-14 - h)/6.

Given that an equation 4k+h = -2k-14, we need to find the value of k,

To solve the equation 4k + h = -2k - 14 for k, we need to isolate the variable k on one side of the equation.

Here are the steps to solve for k:

First, let's move all terms containing k to the left side of the equation by adding 2k to both sides:

4k + 2k + h = -2k + 2k - 14

Simplifying this equation gives us:

6k + h = -14

Next, let's isolate the term with k by subtracting h from both sides:

6k + h - h = -14 - h

This simplifies to:

6k = -14 - h

Finally, we can solve for k by dividing both sides of the equation by 6:

(6k)/6 = (-14 - h)/6

The equation becomes:

k = (-14 - h)/6

Therefore, the solution for k is given by k = (-14 - h)/6.

Learn more about Equations click;

https://brainly.com/question/14686792

#SPJ4