There are 5 quadratics below. Four of them have two distinct roots each. The other has only one distinct root; find the value of that root.a. 4x^2 + 16x − 9b. 2x^2 + 80x + 400c. x^2 − 6x − 9d. 4x^2 − 12x + 9e. −x^2 + 14x + 49

The force that is between two 0. 004 c charges that are 0. 35 m apart in air is 1, 174.2 N.

The force between these charges can be found by Coulomb's Law which states that the electric force linking two charged particles is proportional to both their individual quantitative charge and inversely proportionate to the square of their separation distance.

Given charges of 0. 004 c and 0. 35 m apart, the formula shows :

F = (8. 99 x 10 ⁹ N m ² /C² x | 0. 004 C x 0. 004 C| ) / ( 0. 35 m ) ²

F = 143.84  / 0.1225

F = 1, 174.2 N

Find out more on force at https://brainly.com/question/24743340

#SPJ1

Thus, we can write:

z_0 = -1.75.

To learn mor

(a) From the standard normal distribution table, we can see that the closest probability to 0.3849 is 0.385. The corresponding z-value for this probability is 0.25. Therefore, z_0 = 0.25.

(b) Similar to part (a), the closest probability to 0.37 is 0.3707. The corresponding z-value for this probability is -0.31 (since we want the probability for z less than 0). Therefore, z_0 = -0.31.

(c) The probability of P(-z_0 <= z <= z_0) = 0.92 represents the area under the standard normal distribution curve between -z_0 and z_0. From the standard normal distribution table, we can find the z-value that corresponds to the area of 0.46 (half of 0.92) as 1.75. Thus, we can write:

z_0 = 1.75/2 = 0.875

(d) P(z > z_0) = 0.095 represents the area under the standard normal distribution curve to the right of z_0. From the standard normal distribution table, we can find the z-value that corresponds to the area of 0.905 (1-0.095) as 1.645. Thus, we can write:

z_0 = 1.645

(e) P(z <= z_0) = 0.04 represents the area under the standard normal distribution curve to the left of z_0. From the standard normal distribution table, we can find the z-value that corresponds to the area of 0.04 as -1.75 (since we want the z-value to be negative). Thus, we can write:

z_0 = -1.75.

To learn more about distribution visit:

https://brainly.com/question/29062095

#SPJ11

Answer:

The question was not complete I can't help until it is

Step-by-step explanation:

The value of the probability P(3) is 1/4.

We have,

There are 4 outcomes.

i.e

3, 4, 5, and 6.

Now,

P(3)

This means,

The probability of getting 3 as the outcome when spun.

So,

P(3) = 1/4

Thus,

The value of the probability P(3) is 1/4.

Learn more about probability here:

https://brainly.com/question/14099682

#SPJ1

To find the percentage of 84 out of 113, we need to first calculate what percentage of the total score 84 represents.
If a score of 113 is 40%, then we can set up a proportion:
113 / 100 = 40 / x
where x represents the percentage we are trying to find.

Cross-multiplying, we get:
113x = 4000
Dividing both sides by 113, we get:
x = 35.4
So, 84 represents approximately 35.4% of the total score of 113.

To learn more about Percentage & Score : https://brainly.com/question/24877689

#SPJ11

The solution is, the solutions using the Zero Product Property: is x =0 and -5.

The expression to be solved is:

x(x + 5) = 0

we know that,

The zero product property states that the solution to this equation is the values of each term equals to 0.

now, we have,

x (x + 5) = 0

i.e. we get,

(x) × (x + 5) = 0

so, using the Zero Product Property:

we get,

(x) = 0

or,

(x + 5) = 0

so, we have,

x = 0 or, x = -5

The answers are 0 and -5.

To learn more on equation click:

brainly.com/question/24169758

#SPJ1

The first-order and the second-order Taylor formula for f(x, y) = 17e(x+y) at (0,0) is f(x,y) = 17 + 17x + 17y + (17/2)x² + 17xy + (17/2)y²

The first-order Taylor formula for f(x,y) = 17[tex]e^{(x+y)}[/tex] at (0,0) is:

f(x,y) ≈ f(0,0) + ∇f(0,0) · (x,y)

≈ 17[tex]e^{(0+0)}[/tex] + (∂f/∂x, ∂f/∂y)(0,0) · (x,y)

≈ 17 + (17,17) · (x,y)

≈ 17 + 17x + 17y

The second-order Taylor formula for f(x,y) = 17[tex]e^{(x+y)}[/tex] at (0,0) is:

f(x,y) ≈ f(0,0) + ∇f(0,0) · (x,y) + (1/2)(x,y) · Hf(0,0) · (x,y)

≈ 17 + (17,17) · (x,y) + (1/2)(x,y) · ( ∂²f/∂x² ∂²f/∂x∂y ; ∂²f/∂y∂x ∂²f/∂y² ) (0,0) · (x,y)

≈ 17 + 17x + 17y + (1/2)(x,y) · (17 17 ; 17 17) · (x,y)

≈ 17 + 17x + 17y + (1/2)(17x² + 34xy + 17y²)

≈ 17 + 17x + 17y + (17/2)x² + 17xy + (17/2)y²

Learn more about the second-order Taylor formula at

https://brainly.com/question/31401542

#SPJ4

The equation that represents the number of milliliters y of water in the bowl after x seconds is: y = 16x

The constant of proportionality for this relationship is the slope of the linear function that passes through any two points on the line. We can use the points (20, 320) and (60, 960) from the table to find the slope:

slope = (960 - 320) / (60 - 20) = 640 / 40 = 16

Therefore, the equation that represents the number of milliliters y of water in the bowl after x seconds is: y = 16x

The constant of proportionality is the ratio that relates two given values in what is known as a proportional relationship. Other names for the constant of proportionality include the constant ratio, constant rate, unit rate, constant variation, or even the rate of change.

Learn more on constant of proportionality here;

brainly.com/question/28413384

#SPJ4

The equation of the tangent plane to the given surface at the specified point (3, -2, 18) is z - 18 = 8(x - 3) - 12(y + 2).

To find the equation of the tangent plane to the given surface at the specified point (3,-2,18), we first need to find the partial derivatives of z with respect to x and y:

∂z/∂x = 4(x-1)
∂z/∂y = 12(y+3)

Then, we can evaluate these partial derivatives at the given point (3,-2,18):

∂z/∂x = 4(3-1) = 8
∂z/∂y = 12(-2+3) = -12

Next, we can use these partial derivatives and the point (3,-2,18) to write the equation of the tangent plane in point-normal form:

z - z0 = ∂z/∂x(x - x0) + ∂z/∂y(y - y0)

Plugging in the values we found:

z - 18 = 8(x - 3) - 12(y + 2)

Simplifying:

8x - 12y - z = -22

Therefore, the equation of the tangent plane to the given surface at the point (3,-2,18) is 8x - 12y - z = -22.
To find an equation of the tangent plane to the given surface z = 2(x - 1)^2 + 6(y + 3)^2 + 4 at the specified point (3, -2, 18), follow these steps:

1. Calculate the partial derivatives of the function with respect to x and y:
∂z/∂x = 4(x - 1)
∂z/∂y = 12(y + 3)

2. Evaluate the partial derivatives at the specified point (3, -2, 18):
∂z/∂x(3, -2) = 4(3 - 1) = 8
∂z/∂y(3, -2) = 12(-2 + 3) = -12

3. Use the tangent plane equation to find the tangent plane at the specified point:
z - z0 = ∂z/∂x(x - x0) + ∂z/∂y(y - y0)
where (x0, y0, z0) = (3, -2, 18)

4. Plug in the values and simplify the equation:
z - 18 = 8(x - 3) - 12(y + 2)

To learn more about tangent planes go to :

https://brainly.com/question/30589915#

#SPJ11

Answer:

1344

Step-by-step explanation:

multiply the length(12in) ×width(14in)×height(8in)

Answer:

[tex]\frac{2}{15}[/tex]

Step-by-step explanation:

1. There are 9 balls in total in the first box, and 6 red balls in there so we would represent this as [tex]\frac{6}{9}[/tex] and that can be simplified to [tex]\frac{1}{3}[/tex] .

2. There are 5 balls in total in the second box, and 2 blue balls in there, so we would represent this as [tex]\frac{2}{5}[/tex] . This can't be simplified, so we leave it like that.

3. Because it's a consecutive event we multiply the probabilities, which gives us [tex]\frac{2}{15}[/tex] . This can't be simplified, and that gives us our answer.

The mean of the distribution of sample means would be 27 hours, which is the same as the average life of the candles.

This is because the sample means would be expected to be centered around the population mean.

The standard deviation of the distribution of sample means (also known as the standard error of the mean) can be calculated using the formula:

standard deviation of sample means = standard deviation of population / square root of sample size

In this case, the standard deviation of sample means would be:

6 / square root of 4 = 3

So the answer is 3.

So, the mean of the distribution of the sample means would be 3. Your answer: 3.

To learn more about mean : brainly.com/question/31101410

#SPJ11

The probabilities and the expected values are calculated below

Next cereal box wll contain blue or yellow

Here, we have

Yellow or blue = 15 + 5 = 20

Total = 50

So, we have

P(Yellow or blue) = 20/50

P(Yellow or blue) = 2/5

Arrival time before 7:30 am

Here, we have

Arrival time before 7:30 am = 7

Total time = 20

So, we have

P(Arrival time before 7:30 am) = 7/20

Team least likely

Convert the probabilities to decimal

So, we have

Nets = 0.67

Rockets = 0.5

Bucks = 0.8

Warriors = 0.375

This means that the team least likely to play in the championship game is 0.375

Section 7 in the game

Here, we have

P(7) = 35/250

In 150 times, we have

n(7) = 35/250 * 150

n(7) = 21

So, the number of times is 21

Expected students to eat chicken nuggets

Here, we have

P(Chicken) = 14/40

In 840 students, we have

n(Chicken) = 14/40 * 840

n(Chicken) = 294

Hence, the expected number of students to eat chicken nuggets is 294

Read more about probabilities at

https://brainly.com/question/251701

#SPJ1

The weight of the ice after 10 hours is 1217 lb

A 523 lb mass of ice melts at 4.3 hours

The first step is to calculate the weight after one hour

523= 4.3

x= 1

cross multiply both sides

4.3x= 523

x= 523/4.3

x= 121.7

The weight after 10 hours can be calculated as follows

121.7= 1

y= 10

y= 121.7 × 10

y= 1217

Hence the weight after 10 hours is 1217 lb

Read more on weight here

https://brainly.com/question/11492940

#SPJ1

if you add up 2 interior degrees the answer is the exterior degree

so the answer is 145

By the Comparison Test, we can conclude that Σ (4sin(n))/([tex]n^2[/tex] - 1) converges.

We can use the Limit Comparison Test to determine the convergence or divergence of the series:

∑(4 sin(n))/n

To do this, we need to find a series whose convergence is known and which can be compared to the given series. Let's choose the series ∑(1/n) since we know that it diverges.

We take the limit of the ratio of the nth term of each series as n approaches infinity:

lim n→∞ (4 sin(n)/n)/(1/n) = lim n→∞ 4 sin(n) = DNE

Since the limit does not exist, we cannot apply the Limit Comparison Test. Therefore, Therefore, by the Comparison Test, we can conclude that Σ (4sin(n))/([tex]n^2[/tex] - 1) converges.

Learn more about Limit Comparison Test

https://brainly.com/question/31362838

#SPJ4

You need to assign a 3-digit identifier to each person to randomly select 900 students from a population of 5 million using a random number table.

To randomly select 900 students from a population of 5 million using a random number table, you need to assign a unique identifier to each person. This identifier should be a sequence of digits that allows you to distinguish between individuals and assign a random number to each.

To determine the number of digits required for this identifier, you can use the formula:

n = log10(N)

where N is the population size and n is the number of digits required. In this case:

N = 5,000,000

n = log10(5,000,000) = 6.7

This means that you need 7 digits to assign a unique identifier to each individual. However, since you are only selecting 900 students, you can truncate the identifier to 3 digits, which will still be sufficient to identify each individual in the sample. Therefore, you need to assign a 3-digit identifier to each person to randomly select 900 students from a population of 5 million using a random number table.

To learn more about random number visit:

https://brainly.com/question/29582166

#SPJ4

The required support wire makes an angle of approximately 67.54° degrees with the ground.

We can use trigonometry to find the angle x. In the diagram, we can see that the support wire, the height of the tower, and the ground form a right triangle. The length of the support wire is the hypotenuse of this triangle, and the distance from the base of the tower to the point where the wire touches the ground is the adjacent side. We can use the tangent function to find the angle x:

tan(x) = opposite / adjacent

In this case, the opposite side is the height of the tower, which we don't know yet. However, we can use the Pythagorean theorem to find it:

height² = support wire² - adjacent²

height² = 100² - 40²

height ≈ 96.8

Now we can plug in the values to find x:

tan(x) = opposite / adjacent

tan(x) = 96.8 / 40

x ≈ 67.54°

Therefore, the support wire makes an angle of approximately 67.54° degrees with the ground.

Learn more about trig ratios here;

https://brainly.com/question/14977354

#SPJ1

Total overhead costs for the purchasing department: $500,000

Total dollar value of merchandise purchased: $10,000,000

Total number of purchase orders: 5,000

Total number of suppliers: 1,000

Using the traditional method of allocating costs based on the dollar value of merchandise purchased, the cost per dollar of merchandise purchased would be:

$500,000 / $10,000,000 = $0.05 per dollar of merchandise purchased

To calculate the cost per purchase order and per supplier using activity-based costing, we first need to calculate the cost driver rates for each activity. The cost driver rate is the total cost of an activity divided by the total number of units of the cost driver for that activity. In this case, the cost driver for the purchase order activity is the number of purchase orders, and the cost driver for the supplier activity is the number of suppliers.

The cost driver rate for the purchase order activity is:

$500,000 / 5,000 = $100 per purchase order

The cost driver rate for the supplier activity is:

$500,000 / 1,000 = $500 per supplier

Using these cost driver rates, we can allocate the purchasing department costs to products based on the number of purchase orders and suppliers for each product. For example, if a product had 10 purchase orders and was purchased from 3 different suppliers, its total purchasing department costs would be:

(10 purchase orders x $100 per purchase order) + (3 suppliers x $500 per supplier) = $1,500

By using activity-based costing, True Fit can allocate its purchasing department costs more accurately and can identify the cost drivers that are most important for its purchasing department. This information can help True Fit make better purchasing decisions and manage its costs more effectively.

To know more about  merchandise purchased refer here:

https://brainly.com/question/15418674

#SPJ11

Therefore, if the person works 54 hours, they would make $1,163.04. Rounded to 2 decimal places, the answer is $1,163.00.

The decimal system employs ten decimal digits, a decimal mark, and a minus sign ("-") for negative quantities when writing numbers. The decimal digits are 0 through 9, with the dot (".") serving as the decimal separator in many (mainly English-speaking) nations and the comma (",") in others.

The fractional portion of the number is represented by the place value that follows the decimal. The number 0.56, for instance, is composed of 5 tenths and 6 hundredths.

We can use proportionality to solve this problem. If the person works 25 hours and makes $539, then their hourly rate is:

$539 ÷ 25 hours = $21.56 per hour

They would make if they work 54 hours, we can multiply their hourly rate by the number of hours worked:

$21.56 per hour × 54 hours = $1,163.04

Learn more about decimal places visit: brainly.com/question/28393353

#SPJ4

The end behavior of f(x)=(2+x2)(x2−36) is determined by the highest degree terms in the numerator and denominator. In this case, the highest degree terms are both x^4.

The numerator (2+x^2) will approach positive infinity as x approaches positive or negative  infinity because the x^2 term dominates.

The denominator (x^2-36) will approach positive infinity as x approaches positive or negative infinity because the x^2 term dominates.

Therefore, as x approaches positive or negative infinity, f(x) will approach positive infinity.

This is because the highest degree term in the function is x^4, which will dominate the function as x approaches infinity or negative infinity. Since the coefficient of x^4 is positive, the function will approach 0 from both sides as x becomes large or very negative.

To learn more about highest degree term : brainly.com/question/28989244

#SPJ11

The correct answer is option b.

To find the median, we need to first put the observations in order:

5, 7, 10, 10, 10, 14, 14, 15, 18, x

Since there are 10 observations, the median is the average of the 5th and 6th observations, which are both 10. Therefore, the median is 10.

To find the mode, we need to find the observation that appears most frequently. Here, both 10 and 14 appear three times each, so the data has two modes: 10 and 14.

To find the standard deviation, we need to first find the mean of the data. We know that the sum of the observations is:

5 + 7 + 10 + 10 + 10 + 14 + 14 + 15 + 18 + x

= 103 + x

Since we know that X = 11.6, we can substitute to get:

Sum of observations = 103 + 11.6 = 114.6

The mean is then:

Mean = (Sum of observations) / (Number of observations)

Mean = 114.6 / 10 = 11.46

To find the standard deviation, we need to calculate the deviation of each observation from the mean, square each deviation, find the average of the squared deviations, and then take the square root.

Deviation of 5 = 11.46 - 5 = 6.46

Deviation of 7 = 11.46 - 7 = 4.46

Deviation of 10 = 11.46 - 10 = 1.46

Deviation of 10 = 11.46 - 10 = 1.46

Deviation of 10 = 11.46 - 10 = 1.46

Deviation of 14 = 11.46 - 14 = -2.54

Deviation of 14 = 11.46 - 14 = -2.54

Deviation of 15 = 11.46 - 15 = -3.54

Deviation of 18 = 11.46 - 18 = -6.54

Deviation of x = 11.46 - x

To find the standard deviation, we need to find the average of the squared deviations.

Average of squared deviations = [(6.46)^2 + (4.46)^2 + (1.46)^2 + (1.46)^2 + (1.46)^2 + (-2.54)^2 + (-2.54)^2 + (-3.54)^2 + (-6.54)^2 + (11.46 - x)^2] / 10

= (41.7316 + 19.8916 + 2.1316 + 2.1316 + 2.1316 + 6.4516 + 6.4516 + 12.5316 + 42.8916 + (11.46 - x)^2) / 10

= (136.786) / 10

= 13.6786

Finally, we take the square root of the average of the squared deviations to find the standard deviation:

Standard deviation = sqrt(13.6786) = 3.8356

Therefore, the correct answer is option b.

Learn more about standard deviation: https://brainly.com/question/24298037

#SPJ11

Answer:

23 ft^3

Step-by-step explanation:

The volume would be the little box plus the big rectangle. The volume of the little box is 2*2*2 which equals 8. The volume of the second box is 1*3*5 which equals 15. The volume of the whole shape is 8+15=23ft^3.

The total number of ways to select the jerseys is [tex]$38220+499200=537420$[/tex].

(i) If he would like to hang up more or equal number of football jerseys than basketball jerseys, there are two cases:

Case 1: He hangs up 6 football jerseys and 0 basketball jerseys.

He can select 6 football jerseys from 15 in [tex]$\binom{15}{6}=5005$[/tex]ways.

Case 2: He hangs up 5 football jerseys and 1 basketball jersey.

He can select 5 football jerseys from 15 in [tex]$\binom{15}{5}=3003$[/tex] ways.

He can select 1 basketball jersey from 10 in [tex]$\binom{10}{1}=10$[/tex] ways.

Therefore, the total number of ways to select the jerseys is [tex]$5005+3003\times10=32035$[/tex].

(ii) If he would like to hang up an equal number of football and basketball jerseys, but he can't hang up Surya's basketball jersey without also hanging up Ashu's football jersey, there are two cases:

Case 1: He hangs up 3 football jerseys and 3 basketball jerseys, without Surya's jersey.

He can select 3 football jerseys from 15 in [tex]$\binom{15}{3}=455$[/tex] ways.

He can select 3 basketball jerseys (excluding Surya's) from 9 in [tex]$\binom{9}{3}=84$[/tex] ways.

Therefore, the total number of ways to select the jerseys is [tex]$455\times84=38220$[/tex].

Case 2: He hangs up 4 football jerseys and 2 basketball jerseys, with Surya's jersey.

He can select Surya's basketball jersey and Ashu's football jersey, then select 3 football jerseys from the remaining 13 and 1 basketball jersey from the remaining 8.

He can select 2 basketball jerseys (excluding Surya's) from 8 in [tex]$\binom{8}{2}=28$[/tex] ways.

Therefore, the total number of ways to select the jerseys is [tex]$2\times\binom{13}{3}\times\binom{8}{2}=499200$[/tex].

Thus, the total number of ways to select the jerseys is [tex]$38220+499200=537420$[/tex].

To learn more about  jerseys visit:

https://brainly.com/question/18382861

#SPJ11

The 7th derivative of f(x)=cos(3x³) - 1/x⁵ at x=0 is 3240.

To find the 7th derivative of f(x) at x=0, we need to build a Maclaurin series for f(x) from the series for cos(x). The Maclaurin series for cos(x) is:

cos(x) = 1 - x²/²! + x⁴/⁴! - x⁶/⁶! + ...

Using this, we can build a Maclaurin series for f(x) as follows:

f(x) = cos(3x³) - 1/x⁵

= (1 - (3x³)²/²! + (3x³)⁴/⁴! - (3x³)⁶/⁶! + ...) - 1/x⁵

= 1 - 9x⁶/²! + 81x¹²/⁴! - 729x¹⁸/⁶! + ... - 1/x⁵

= 1 - 9x⁶/²! + 81x¹²/⁴! - 729x¹⁸/⁶! + ... - x⁻⁵

Taking the 7th derivative of this expression and evaluating at x=0 gives:

f⁷ * ⁰ = 7! * (-9)/2!

= 3240

Therefore, the 7th derivative of f(x)=cos(3x³) - 1/x⁵ at x=0 is 3240.

Learn more about derivative

https://brainly.com/question/12047216

#SPJ4

How much does it take to cover the cylinder? is different from the rest, as it refers to the surface area of the cylinder, not its volume or capacity.

The term "cover" usually means to place something over the top or on the surface of something else, such as a lid covering a container.

In the context of a cylinder, "covering" would typically refer to finding the surface area of the cylinder, which includes both the top and bottom circles as well as the curved lateral surface.

In contrast, the other statements are related to the volume or capacity of the cylinder, which refers to how much space is contained inside the cylinder.

To learn more on Three dimensional figure click:

https://brainly.com/question/2400003

#SPJ1

The missing elements are: Radius = 19 inches, Circumference = 119.32 inches and Area = 1133.54 square inches

The radius of a circle is half the diameter of the same circle.

The diameter is 38 inches.

This means that the radius is 19 inches

The circumference is calculated as:

C = 2πr

C = 2 × 3.14 × 19

C = 119.32

Area will be:

= πr²

= 3.14 × 19²

= 1133.54

Learn more about circumference on

https://brainly.com/question/12331907

#SPJ1

The hypothesis that the variance in the number of patients seen per day is equal to 10 cannot be rejected  based on the given data and using a level of significance of 0.05.

To determine if the variance in the number of patients seen per day is equal to a specific value, we can conduct a hypothesis test. Let's assume the null hypothesis is that the variance is equal to the specified value, and the alternative hypothesis is that the variance is not equal to the specified value.

We can use a chi-square test to test this hypothesis, where the test statistic is calculated as (n-1)*s²/σ², where n is the sample size, s² is the sample variance, and σ² is the hypothesized population variance. This test statistic follows a chi-square distribution with n-1 degrees of freedom.

Using a level of significance of 0.05, with 9 degrees of freedom (since there were 10 observations), the critical value for the chi-square distribution is 16.92.

Calculating the sample variance from the given data, we get s^2 = 4.44. Assuming the hypothesized population variance is 10, the test statistic is (9)*4.44/10 = 4.00.

Since the test statistic (4.00) is less than the critical value (16.92), we fail to reject the null hypothesis. Therefore, there is not enough evidence to conclude that the variance in the number of patients seen per day is not equal to 10.

In conclusion, based on the given data and using a level of significance of 0.05, we cannot reject the hypothesis that the variance in the number of patients seen per day is equal to 10.

More on hypothesis: https://brainly.com/question/7295550

#SPJ11

The area of the brick border is: 7.678 m²

Using Pythagoras theorem, we can find the diameter of the circle as:

d = √(10² - 6²)

d = √64

d = 8 m

Since the width of the brick border is 40 cm, then converting to meters gives 0.4 m.

Area of semi circle with brick border = ¹/₂(π * (8.8/2)²) = 30.411 m²

Area of semi circle without brick border = ¹/₂(π * (8/2)²) = 25.133 m²

Area of circular part of border = 30.411 m² - 25.133 m²

= 5.278 m²

Area of rectangular part of border = 6 * 0.4 = 2.4 m²

Total area of border = 5.278 m² + 2.4 m²

= 7.678 m²

Read more about Area of composite figure at: https://brainly.com/question/10254615

#SPJ1