Answer:
The acceleration of proton is 5.56 x 10^10 m/s^2 .
Explanation:
initial velocity, u = 0
Electric field, E = 580 N/C
final speed, v = 10^6 m/s
(a) Let the acceleration is a.
According to the Newton's second law
F = m a = q E
where, q is the charge of proton and m is the mass.
[tex]a= \frac{q E}{m}\\\\a = \frac{1.6\times10^{-19}\times 580}{1.67\times 10^{-27}}\\\\a= 5.56\times 10^{10} m/s^2[/tex]
The chart shows the speed at which light travels through different media.
In which medium would light have the longest wavelength?
- Water
- Air
- Glass
- Diamond
Answer:
Air.
Explanation:
To know which option is correct, let us consider the relationship between velocity and the wavelength of a wave. This is illustrated below:
Velocity, wavelength and frequency are related by the following equation:
Velocity = wavelength × frequency
v = λf
From the equation above, we can see clearly that the velocity is directly proportional to the wavelength.
This means that an increase in the wavelength will lead to an increase in the velocity and also, a decrease in the wavelength will lead to a decrease in the velocity.
Now, considering the table given in the question above, we can see that the wave has a higher speed in air. This simply means that the wave will also have a higher wavelength in air.
Thus, the correct answer to the question is: air
Which two factors affect the size of the gravitational field?
Answer:
Explanation:
mass and distance
ive an example of a pair of variables that have negative correlation. A. The quantity of fertilizers used and crop yield. B. The color of a person's shirt and the number of meals sold at Chinese restaurants. C. The number of physicists and the speed of sound. D. The number of winter coats sold and the temperature outside.
Answer:
D. The number of winter coats sold and the temperature outside.
Explanation:
A negative correlation can be described as a relationship existing between two variables such that as one of these variables goes up, the other variable would go down and vice versa.
With this explanation in mind, as the temperature outside increases, less winter coats would be sold because an increase in temperature would mean more heat and hotness. People would be uncomfortable wearing thick clothing.
A car travelling at 10ms ,acceleration uniformly at 2ms what will be its velocity after 5s?
[tex]we \: know \: that \\ acceleration = \frac{(final \: velocity - initial \: velocity)}{time} \\ = > a = \frac{(v - u)}{t} \\ = > 2m {s}^{ - 2} = \frac{{(v - 10m {s}^{ - 1} })}{5s} \\ = > 2m {s}^{ - 2} \times 5s = v - 10m {s}^{ - 1} \\ = > 10m {s}^{ - 1} = v - 10m {s}^{ - 1} \\ = > 10m {s}^{ - 1} + 10m {s}^{ - 1} = v \\ = > 20m {s}^{ - 1} = v \\ = > 20m {s}^{ - 1} = initial \: velocity[/tex]
Hope it helps!!
Thanks!!
Answer:
20 ms
Explanation:
You know
acceleration=2ms initial Velocity=10ms Time=5s
We are finding Final V
Use the equation Final v = (a x t) + initial v
2 x 5 = 10
10 + 10 = 20
convert 700kg into grams
Answer:
700,000g
Explanation:
1kg = 1000 Grams (or any kg x 1000)
Answer:
700 kilograms is equal to 700,000 grams
Explanation:
One kilogram has 1000 grams, or if you want the other way around, one gram is 1/1000th of one kilogram. If you follow this logic, we want to use the 'one kilogram has 1000 grams' "rule", so we would do some math here.
700 kg x 1000 g = ______ g
700*1000 = 700,000
700 kg = 700,000 g
Please let me know if I misunderstood and I hope this helped!
TRUE OR FALSE. if an object covers equal distance at equal intervals of time, then it is moving at constant speed and not accelerating
Answer:
True
Explanation:
Speed = distance/time
If distance and time are the same, then the right hand side of the equation remains the same, causing us to solve the left to the same value
As the distance is the same (say 50m) and the time is the same (say 50s) then the speed must be the same (1m/s)
when you order clothes, does the sweater has to be longer than your shirt to fit you just like the shirt?
Answer:
Yes.⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
how to solve for resistors
9514 1404 393
Answer:
A1 = 3A, A2 = 1.5A
Effective resistance = 2Ω
Explanation:
When the switch is closed, the voltage across each resistor is 6V, so the current through it (A2) is ...
A2 = 6V/(4Ω) = 1.5A
There are two parallel paths, each with that current, so the current from the battery is ...
A1 = A2 +A2 = 1.5A +1.5A = 3.0A
Then the effective resistance is ...
Reff = 6V/(3.0A) = 2.0Ω
The solution to the circuit is ...
A1 = 3A, A2 = 1.5A
Effective resistance = 2Ω
A wave travels at 330m/s^-1. the wavelength is found to be 2.4m.
Calculate the period of oscillation of a article in the medium transmitting the waves.
The frequency of oscillations of the source transmitting the wave
Answer: frequency 137.5
Time period 0.01sec
Explanation:
Help me and I'll make u Brainliest and follow u
26. D. crushing the sugar cube and dissolving it in water.
27. A. atom
28. B. molecule
29. B. plum pudding model of Joseph John Thomson
30. B. He used cathode ray tubes which showed that all atoms contain tiny negatively charged subatomic particles or electrons.
31. D. protons and neutrons are relatively heavier than electrons.
13.Suppose a ball of mass m is thrown vertically upward with an initial speed v, its speed decreases continuously till it becomes zero. Thereafter, the ball begins to fall downward and attains the speed u again before striking the ground. It implies that the magnitude of initial and final momentums of the ball are same. Yet, it is not an example of conservation of momentum. Explain why?
Answer:
Law of conservation of momentum is applicable to isolated system (no external force is applied).
In this case, the change in velocity is due to the gravitational force of earth.When the ball is thrown up, negative force of gravity is applied and so the speed becomes zero.After that due to gravitational force the ball falls down with same initial velocity.
Why is it extremely dangerous to attempt to carry out a distillation in a completely closed apparatus
Answer:
The main reason is to avoid explosion
Explanation:
When we carry out distillation process, it will get to a point where gases/steam are released due to evaporation, if we do not create a channel for exit they will build up in the apparatus and will ultimately lead to explosion
Which statement best describes an insulator
how to answer thiss helppp
Answer:
Look at work
Explanation:
Your given the mass of planet M and radius as well as second mass.
Use universal gravitation law to find force of gravity
Fg= Gm1m2/r^2
Plug in givens
Fg= 553.6 N
Use newtons second law
Fg= ma
553.6N=5a
solve for a= 110.72m/s
Weight is 553.6N
Define ELASTIC LIMIT, YIELD POINT AND ULTIMATE TENSILE STRENGTH?
[tex] \green{\huge{\red{\boxed{\green{\mathfrak{QUESTION}}}}}} [/tex]
ELASTIC LIMIT, YIELD POINT AND ULTIMATE TENSILE STRENGTH.
[tex] \orange{\underline{\huge{\bold{\textit{\green{\bf{TOPIC}}}}}}} [/tex]
Mechanical Properties Of Solid.
[tex] \huge\green{\boxed{\huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}}}[/tex]
[tex] \bold{ \green{PART \: \: (1):-}} \\ \bold \green {{ ELASTIC \: \: LIMIT}}[/tex]
It is also called yield point
In this limit, energy provided to the material to cause deformation when removed then the material returns to its own shape and size.
In this limit each body shows elastic nature
[tex] \bold{ \red{PART \: \: (2):-}} \\ \bold \red {{YIELD \: \: STRENGTH}}[/tex]
It is the fix amount of the energy which causes fixed permanent set of deformation.
In this body shows plastic deformation.
The level of stress that corresponds to the yield point is referred to as the yield strength of the material.
[tex]\bold{ \purple{PART \: \: (3):- \:ULTIMATE }} \\ \bold \purple {{TENSILE \: \: STRENGTH}}[/tex]
It is the amount of the stress which causes permanent set of deformation after the yield point.
Body show perfect plastic deformation.
This shows a permanent set of deformation.
[tex] \red \star{Thanks \: And \: Brainlist} \blue\star \\ \green\star If \: U \: Liked \: My \: Answer \purple \star[/tex]
A hamster in it's ball starts at rest and accelerates to 3ms1 in 6 seconds.
What was the distance the hamster travelled
Answer:9m
Explanation:
Ball starts from rest . Time taken = 6 seconds. Distance travelled by ball. ∴Distance travelled = 9 m
Hope it helps you
Good luck
Fluorometers are designed so that the path of the excitation light is at a right angle to the path of the emitted light. What is the purpose of this design
Answer: prevent excitation light from reaching the detector
Explanation:
A fluorometer refers to the device that's used in the measurement of parameters that are of visible spectrum fluorescence. They also prevent excitation light from reaching the detector.
These parameters are used in the identification of the amount and presence of molecules in a medium.
A penny is dropped into a well. It takes 5 seconds to fall. Calculate the depth of the well in feet.
Answer:
d=1/2 (a)(t^2)
D = distance
A = acceleration
T = time
acceleration due to gravity is 32 ft/second
so, d=1/2 (32)(5^2)
d=16(25)
d=400
Explanation:
Answer:
400 ft.
Explanation:
D= 1/2 gt^2
=1/2(-32 ft/sec^2)(5 sec^2)
= -(1/2)(32)(25) ft
D= -400 ft, down
Please help
Will give the brainliest!
c. aluminium
d. it cannot travel through glass
e. mass of 55kg, takes 25s to gain a height of 15m
Un auto que acelera a razón de 2 m/S^2 ; Si para cierto tramo se observa que logra triplicar su rapidez en 6 s. ¿Cuál fue su rapidez al final de estos 6 segundos?
Answer:
12m/s
Explanation:
Using the equation of motion
v = u + at
Given that
u = 0m/s
a = 2m/s²
time t = 6s
Substitute the given values into the expression
v = 0 + 2(6)
v = 0+12
v = 12m/s
Hence the required velocity is 12m/s
Help me and I'll make u Brainliest and follow u
26. D. crushing the sugar cube and dissolving it in water.
27. A. atom
28. B. molecule
29. B. plum pudding model of Joseph John Thomson
30. B. He used cathode ray tubes which showed that all atoms contain tiny negatively charged subatomic particles or electrons.
31. D. protons and neutrons are relatively heavier than electrons.
What kind of waves are present during an earthquake?
Answer:
There are four main types of earthquake waves:
P-waves S-waves (which are body waves), Rayleigh waves Love waves (which are surface waves).HOPE IT HELPS!!
A thin rod of length 1.4 m and mass 180 g is suspended freely from one end. It is pulled to one side and then allowed to swing like a pendulum, passing through its lowest position with angular speed 1.80 rad/s. Neglecting friction and air resistance, find (a) the rod's kinetic energy at its lowest position and (b) how far above that position the center of mass rises.
Answer:
[tex]K.E = 0.1905 J[/tex]
Explanation:
From the question we are told that:
Length [tex]L=1.4m[/tex]
Mass [tex]m=180g[/tex]
Angular Velocity [tex]\omega=1.80rads/s[/tex]
Generally the equation for Kinetic energy K.E is mathematically given by
[tex]K.E =0.5 (1/3 ML^2 )w^2[/tex]
[tex]K.E =0.5 ( 1/3 * 0.18 * 1.4^2 ) 1.8^2[/tex]
[tex]K.E = 0.1905 J[/tex]
the bodies in this universe attract one another name the scientist who propounded this statement
Answer: The scientist named Isaac Newton proposed this universal law of gravitation.
It is given that the bodies in this universe attract one another.
It is required to name the scientist who propounded this statement.
What is the name of the scientist who propounded this statement?According to Newton's law of gravitation, every object in the universe attracts every other object with a force that is proportional to the multiplication of the masses and inversely proportional to the square of the distance between the objects. This is the universal law that means this is a constant term that can't be changed with respect to place which was proposed by Isaac Newton in 1687.
Therefore, Isaac Newton proposed this universal law of gravitation.
Learn more about gravitation here:
https://brainly.com/question/12528243
#SPJ5
Is torque only produced when the force is applied perpendicular to the moment arm?
The Torque is only produced when the force is applied perpendicular to the moment arm.
What is moment of force?The equal and opposite force acting at a point from the axis of rotation is called the moment.
M = F x r
Moment of force is also called as Torque.
Moment arm is the distance of the point of application of force from the axis of rotation of the body.
Thus, the perpendicular component only, produces the torque.
Learn more about moment of force.
https://brainly.com/question/6278006
#SPJ2
Help me and I'll make u Brainliest and follow u
26. D. crushing the sugar cube and dissolving it in water.
27. A. atom
28. B. molecule
29. B. plum pudding model of Joseph John Thomson
30. B. He used cathode ray tubes which showed that all atoms contain tiny negatively charged subatomic particles or electrons.
31. D. protons and neutrons are relatively heavier than electrons.
Sebastián se encuentra en una parada de trenes. El tren n° 15 pasa sin detenerse a una velocidad de 35 km/h. Si situamos el sistema de referencia en Sebastián, ¿el tren n° 15 está en reposo o en movimiento?
Answer:
the train is moving relative to the boy
Explanation:
When the train is on the road, it moves with respect to the Earth at a speed of 35 km / h. When we arrive at the station we change the reference system from the ground to the boy who is in the station, therefore the speed of the train can change
v ’= v + u
where v is the speed of the train with respect to the boy, v is the speed with respect to the ground and u the speed of the boy with respect to the ground
In general, the people in the station are still, that is, their speed with respect to the ground is zero, consequently the speed of the train does not change.
The correct answer is that the train is moving relative to the boy.
An acceleration of 2m/s^2 is produced on a body by applying an effort of 50N. calculate mass of the body
Answer:
25 kg
Explanation:
Given,
Acceleration ( a ) = 2 m/s^2
Force ( F ) = 50 N
To find : Mass ( m ) = ?
Formula : -
F = ma
m = F / a
= 50 / 2
m = 25 kg
So, the mass of the body is 25 kg.
It is easier to lift the same load by using three pulley system than by using two-pulley system. why give reason.
Logic behind is lies behind the mechanical advantage of the provided bt the Pulley system.
as if we calculate the mechanical advantage of the 2 Pulley system we will have the value 2
And if we will calculate the mechanical advantage of the 3 pulley system then we will get the value of 3
so due to extra mechanical advantage we feel it easy to move with 3 pulley system then 2 Pulley system
[tex] \red \star{Thanks \: And \: Brainlist} \blue\star \\ \green\star If \: U \: Liked \: My \: Answer \purple \star[/tex]
Which type of stress is most likely the cause of irritability?
eustress
O hypostress
O distress
O peripheral stress
Answer:
The correct answer is - distress.
Explanation:
Eustress is a type of stress that is beneficial to person and caused by adrenaline. Hypostress is a stress that is caused due to boredom or no work. It is stress comes with wasting the time.
Distress is the bad stress caused by anxiety, sadness, grief, and such type of stress that is caused irritability. Irritability is caused not just by stress but many factors.
