This would set the seed value as 3, the lower and upper bounds as 1 and 5. Then the test would guess the following numbers, in order: 2, 5, 4, 3, 1. When the correct number is guessed, the program should end. If you do not include all possible values, you may receive errors.

Since you have a tape archive mounted, you need to get a list of the file contents. The command that will list the contents is tar /dev/rmt12

A file or directory that serves as the access point for a new file system, directory, or file is known as a mount point. A directory must be the mount point in order to mount a file system or directory, and a file must be the mount point in order to mount a file.

Therefore, Making a set of files in a file system structure accessible to a user or user group is the computer term "mounting." It can also refer to making a device physically accessible. For instance, to mount means to set up a data medium (such as a tape cartridge) on a drive so that it can be used.

Learn more about command  from

https://brainly.com/question/25808182
#SPJ1

Answer:

- reduces costs through the sharing of both hardware/software resources

- Highest accuracy through various supply sources.

- Reduction of costs

- Increased flexibility

Explanation:

Answer:

a. luster, big, small, Color,,Depends on the object

Answer:

Option (C)

Explanation:

'Clipboard' is described as a buffer in memory where the user can store data temporarily while transferring it from one place within an application to another or between applications. It is a part of RAM that holds the copied data by the time it is pasted into another place. It allows the users to transfer data like which could be text, document, image, or file to move data across different applications without having to type directly. Thus, option C states a true claim about Clipboard and is the correct answer.

A clipboard is a temporary storage that holds a selection until you paste it into a document or folder. Thus, option C is correct.

The term "Clipboard" refers to a memory buffer where users can temporarily store data when moving it from one location inside a program to a different one among applications that are present.

When one is not quite set to use pictures or text by one project again, you can keep them in either a clipboard.

But by the time the cloned data is pasted into yet another location, a portion of the Main memory is already holding the copied data. It enables users to transport data across programs without explicitly typing it, whether it is a word, a document, a picture, or a file.

Therefore, option C is the correct option.

Learn more about Clipboard, here:

https://brainly.com/question/25952279

#SPJ2

A network is divided into several parts (subnets) using network segmentation, which creates smaller, independent networks for each segment.

Segmentation works by regulating the network's traffic flow. The term "network segmentation" should not be confused with "microsegmentation," which limits east-west communication at the workload level in order to lower an organization's network attack surface.

Despite having some uses, microsegmentation should not be confused with standard network segmentation.

A network is divided into several zones via network segmentation, and each zone or segment is independently managed. To regulate what traffic is allowed to pass through the segment and what is not, traffic protocols must be used.

Dedicated hardware is used to create network segments that are walled off from one another and only permit users with the proper credentials to access the system.

Therefore, A network is divided into several parts (subnets) using network segmentation, which creates smaller, independent networks for each segment.

To learn more about network, refer to the link:

https://brainly.com/question/15088389

#SPJ1

The thing that  you would enter at the command prompt to change the group ownership for the devstyle.txt file to rand in the present working directory is chgrp rand devstyle.txt.

The Command Prompt is an application that simulates the input field in a text-based user interface screen in Windows operating systems using the Windows Graphical User Interface (GUI). It can be used to carry out advanced administrative tasks and carry out commands that are entered.

Hence, to use, do select a folder and launch the command prompt there.Go to the folder where you want to the command prompt to be opened. At the top of the window, click the address bar. CMD is entered into the address text box, then Enter is pressed. Directly in that folder, the command prompt window will launch.

Learn more about command prompt from

https://brainly.com/question/25808182
#SPJ1

Answer:

B. this

Explanation:

In a constructor for example, this.x will refer to the current object's variable(s).

public class Main {

 int x;

 // Constructor with a parameter

 public Main(int x) {

   this.x = x;

 }

 // Call the constructor

 public static void main(String[] args) {

   Main myObj = new Main(5);

   System.out.println("Value of x = " + myObj.x);

 }

}

Answer:

The digital read Harry quaant

The host that automatically configured with an address from which of the following ranges indicates an inability to contact a DHCP server is option B. 169.254.X.X with a mask of 255.255.0.0.

The range 169.254. 0.0-169.254. 255.255 has been set aside by the Internet Assigned Numbers Authority (IANA) for Automatic Private IP Addressing. Since routable addresses are guaranteed not to clash with it, APIPA offers an address.

Hence, Each octet in the IP address is distinguished by a 32-bit number. For instance, 255.255.0.0 is a typical Class B subnet mask because the first two bytes (network) and the last two bytes (zeros) are all ones. This is seen in Table 4.9. (host).

Learn more about DHCP server from

https://brainly.com/question/10097408
#SPJ1

Since you need to boot a windows 10 system into safe mode, the steps that will accomplish this task are option A and E:

__Run the msconfig.exe utility and specify the boot mode.

__Select Start > Settings > Update & Security > Recovery > Advanced startup > Restart Now.

Safe mode disables several features of your phone while assisting you in identifying issues with your widgets and apps. Recovery mode is activated by holding down a few buttons while the computer is starting up.

Therefore to run, do:

When the System Configuration box appears, select Restart to put the modifications into effect.

Learn more about windows 10 system from

https://brainly.com/question/27960518
#SPJ1

See full question below

You need to boot a Windows 10 system into Safe Mode. Which steps will accomplish this task? (Select TWO. Each choice is a complete solution.)

__Run the msconfig.exe utility and specify the boot mode.

__Press F8 at startup.

__Press F2 at startup.

__Press ALT at startup.

__Select Start > Settings > Update & Security > Recovery > Advanced startup > Restart Now.

The program is illustrated thus based on the information;

import sys

if __name__ == '__main__':

num = float(input('Enter a number: '))

if num < 0.0:

 print('Error! invalid number')

 sys.exit()

digits = int(input('Enter required no. of binary digits: '))

if digits < 0:

 print('Error! invalid digits')

 sys.exit()

num -= int(num)

res = ''

curr = 0

while num != 0 and curr < digits:

 num *= 2

 res += str(int(num))

 num -= int(num)

 curr += 1

print('0.' + res)

In this program, it should be noted that the program takes a fraction as input.

To illustrate the program, one should define what the program should do and then visualize it on the computer. A model of the program should be created and checked for logical errors.

Then, the program source code will be written and compiled, Any errors found during the compilation is corrected. This depicts how the program is computed.

Learn more about program on:

https://brainly.com/question/26642771

#SPJ1

A statement that declares Salaried as a subclass of payType include the following: D. Public class Salaried extends PayType.

In object-oriented programming (OOP) language, an object class represent the superclass of every other classes when using a programming language such as Java, Java Script, etc. Additionally, the superclass is more or less like a general class in an inheritance hierarchy.

This ultimately implies that, a subclass can inherit the variables or methods of the superclass.

In this scenario, a method in Java which allows Salaried to be a subclass of payType is the syntax "Public class Salaried extends PayType."

Read more on object class here: brainly.com/question/14963997

#SPJ1

The IEEE representation for the number 1100 0000 1001 0000 0000 0000 0000 0000 tells us that this number is the binary number in normalized scientific notation for 1.001 x 2A129

The IEEE-754 standard defines floating-point formats, which are a method of representing real numbers in hardware. There are at least five internal floating-point number formats that can be represented in hardware targeted by the MSVC compiler.

IEEE single-precision floating-point standard representation requires a total of 32 bits for each word, with 23 fraction bits F, 8 exponent bits E, and 1 sign bit S. F is the mantissa in the 2's complement positive binary fraction represented by bits 0 through 22.

In this case, the correct option is D.

Learn more about binary on:

https://brainly.com/question/16612919

#SPJ1

try:

   f = open('info.txt', 'r')

except:

   print('File not found')

dino_list = []

for line in f.readlines():

   dino_list.append(line)

f.close()

def modify_animal_names(list):

   for i in range(len(list)):

       list[i] = list[i].capitalize().replace('\n', '')

modify_animal_names(dino_list)

def find_replace_name(list, name):

   for i in range(len(list)):

       if list[i] == name:

           list[i] = 'NAME'

find_replace_name(dino_list, 'Ankylosaurus')

This will print out:

['Ankylosaurus', 'Carnotaurus', 'Spinosaurus', 'NAME']

(If you have any more questions, feel free to message me back)

Answer:

B. www.yourco.com

Explanation:

it is the only one with .com at the end. the https/http is default for all urls but the .com is a top level domain so it is part of the url because there are other domain suffixes like .ca .uk .org so it's needed to specify which site you're going to.

Tokenization is the best solution to meet the requirement. Hence option A is correct.

Database administration is defined as the information technician responsible for overseeing and carrying out all tasks necessary to successfully manage a database environment. Their responsibilities include ensuring that a data management policy is followed and that these crucial pieces of technology remain operational.

Tokenization is defined as a method by which a piece of sensitive information, like a credit card number, is replaced by a token-based substitute value. You can convert indivisible assets into token forms through tokenization.

Thus, tokenization is the best solution to meet the requirement. Hence option A is correct.

To learn more about database administration, refer to the link below:

https://brainly.com/question/9979302

#SPJ1

The method of a file object inputs a line of text and returns it as a string, including the newline is readLine. Thus, option D is correct.

The Object Input interface adds object reading to the Data Input interface. Data Input contains primitive type input methods; Object Input expands that interface to accommodate objects, arrays, and Strings.

The ReadLine function takes a line from either the standard input stream and returns it. (For a definition of a line, read the paragraph below the list.) This implies that if the default input device is a keyboard, the ReadLine function will be blocked until the user pushes the Enter key.

Therefore, it can be concluded that option D is correct.

Learn more about inputs here:

https://brainly.com/question/9759990

#SPJ1

The  unit of information that contains mac addresses and an error checking code that's processed by the network interface layer is frame.

The source and destination addresses of a frame are the Media Access Controller (MAC) addresses of a computer, tablet, IP phone, IoT device, etc. rather than a name and department. Each and every Ethernet device in the world has a different ID number.

Therefore, A frame is a unit of formatted data that is prepared to be sent over a network medium. It includes a source and destination MAC address as well as a frame check sequence error-checking code. The Data Link layer's preferred unit of data is the frame.

Learn more about mac addresses from

https://brainly.com/question/13267309
#SPJ1

Q:

What is the subscript for the data value 92 in the example given below? Declare Integer score [5]= 83, 92, 78, 94, 71 A ) One B ) Two C ) A D ) B E ) None of these

Answer:

One

The behavior of this program correctly displays the sum of all positive integers from 1 to number. Therefore, option A is correct.

Zero, a positive natural number, or a negative integer denoted by a minus sign are all examples of integers. The inverse additives of the equivalent positive numbers are the negative numbers. The boldface Z is a common way to represent the set of integers in mathematical terms.

When two integers have the same sign, their product or quotient is always positive, but when two integers have different signs, their product or quotient is always negative.

Thus, option A is correct.

To learn more about an integer, follow the link;

https://brainly.com/question/1768254

#SPJ1

Explanation:

d. security

surprise, surprise ...

benchmarking means setting a standard or baseline usually regarding system performance. and then others measure against this.

algorithms is in general any technical strategy, the "recipe" of a method to get a result of of certain input factors (like how you implement a sorting of a list of elements).

controls are things that allow the user some steering of the system (like a joystick). or sometimes also some consistency checks of a system (but true, also of security systems of security parts of a system) to detect that something went wrong (either unintentional or intentional tempering).

bottom line : all are also topics of security systems or security elements of a general system.

but the name for all this and more to protect a system, it's environment and users (particularly use information) from unauthorized access, ... is "security".

If one needs to determine the hash file of several files that are to be sent to a U.S. government agency. The authorized hash functions that can be used are:

SHA-1 (Secure Hash Algorithm-1), and the. SHA-2 family of hash algorithms: SHA-224, SHA-256, SHA-384, SHA-512, SHA-512/224, and SHA-512/256.

When you hash a message, you take any length string of data as input and run it through a mathematical method that produces an output of a set length.

Some hashing algorithms divide the original data input into smaller chunks of equal size. If there isn't enough data in any of the blocks to fill it up, padding (1s and 0s) can be used to fill it out. The separate blocks of data are then passed through a hashing algorithm, which produces a hash value as an output.

Learn more about Hash Functions:
https://brainly.com/question/13106914
#SPJ1

Constructed travel is the processing mixed modes of tdy travel first you should determine.

Learn more about Constructed travel refer to :

https://brainly.com/question/28701787

#SPJ4

The modem is used for a  fax machine that requires a specific component to use POTS to send a fax.

What is a modem?

A modem is a network device that modulates and demodulates analog carrier signals (also known as sine waves) in order to encode and decode digital data for processing. Modems perform both of these tasks at the same time, which is why the term modem is a combination of "modulate" and "demodulate."

Simply put, POTS (also known as PSTN, or public switched telephone network) is an abbreviation for plain old telephone service and is what everyone is familiar with as their traditional landline phone system. It is essentially an analog voice transmission system with copper wires.

Hence to conclude modem is required for  the POTS to send a fax

To know more on modem follow this link:

https://brainly.com/question/7320816

#SPJ1

Using the knowledge in computational language in JAVA it is possible to write a code that string will be used as a screen saver with a panel background color BLACK.

import java.awt.*;

import java.util.*;

import javax.swing.JFrame;

class ScreenSaver

{

    public static void main( String args[] )

   {

       Scanner sc=new Scanner(System.in);

       System.out.println("Enter a name you want add as a Screen_saver:");

       String s=sc.nextLine(); //read input

       sc.close();

           JFrame frame = new JFrame( " Name ScreenSaver " );

       frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );

             JPanalSaver saver1JPanel = new JPanalSaver(s);

               saver1JPanel.setPreferredSize(new Dimension(500,500));

               frame.add( saver1JPanel );

       frame.setSize( 500, 500 ); // set the frame size (if panel size is not equal to frame size, text will not go to top left corner)

       frame.setVisible( true ); // displaying frame

   }

}

JPanalSaver.java

import java.awt.Color;

import java.awt.Graphics;

import javax.swing.JPanel;

public class JPanalSaver extends JPanel {

   int x1 = 500, y1 = 500;

   int r = 255, g1 = 255, b = 255;

   String color;

   int iterator = 0;

   JPanalSaver(String c) {

       color = c;

   }

   public void paintComponent(Graphics g) {

       super.paintComponent(g); // call super class's paintComponent

       x1 = x1 - 5;

       y1 = y1 - 5;

              if (iterator ==0) {

                     r = Math.abs((r - 5) % 255);

           iterator = 1;

       } else if (iterator == 1) {

           g1 = Math.abs((g1 - 5) % 255);

           iterator = 2;

       } else {

           b = Math.abs((b - 5) % 255);

           iterator = 0;

       }

       g.setColor(new Color(r, g1, b));

       g.drawString(color + " " + r + " " + g1 + " " + b, x1, y1); //string + value of RGB

       //top left position (0,0 will not display the data, hence used 5,10)

       if (x1 > 5 && y1 > 10)

       {

           repaint(); // repaint component

           try {

               Thread.sleep(50);

           } catch (InterruptedException e) {

           }   //50 milliseconds sleep

       } else

           return;

   }

See more about JAVA at brainly.com/question/13208346

#SPJ1

Your computer is on a Public Network if it has an IP address of 161.13.5.15.

A private network on the Internet is a group of computers that use their own IP address space. In residential, business, and commercial settings, these addresses are frequently used for local area networks.

Private Network IP address ranges are defined under IPv4 and IPv6 standards, respectively. Private IP addresses are used in corporate networks for security since they make it difficult for an external host to connect to a system and also limit internet access to internal users, both of which contribute to increased security.

Therefore,Your computer is on a Public Network if it has an IP address of 161.13.5.15.

To learn more about Private Network, use the link given

brainly.com/question/6888116

#SPJ1

The steps to follow in order to produce a Pivot table would be as mentioned below is Opting the columns for a pivot table. Now, make a click on the insert option.

This click is followed by opting for the pivot table and the data columns that are available in it. After this, the verification of the range of the table is made and then, the location for the pivot table has opted.

After this, the column is formatted and the number option is selected followed by the currency option, and the quantity of decimal places. A Pivot table allows one to establish a comparison between data of distinct categories(graphic, statistical, mathematical) and elaborate them.

Therefore, The steps to follow in order to produce a Pivot table would be as mentioned below Opting the columns for a pivot table. Now, make a click on the insert option.

Learn more about 'Pivot Table' here:

brainly.com/question/13298479

#SPJ1

The term that is used to describe RFID chips that don’t have their own power supply is Passive RFID systems.

In order to function, passive RFID tags must be powered by the radio frequency energy that RFID readers and antennas transmit. The reader and antenna send a signal that activates the tag and reflects energy back to the reader.

A battery is frequently the power source for an active RFID tag. RFID passive. The reading antenna's electromagnetic wave causes a current in the RFID tag's antenna, giving the passive RFID tag its power.

Hence, The electromagnetic energy transferred from an RFID reader powers passive RFID tags, which lack an internal power source.

Learn more about RFID from

https://brainly.com/question/25705532
#SPJ1

A firewall rule that can prevent ip spoofing on outgoing packets from its internal network is given as follows:

Transport mode: Before the payload information, a header is connected to the beginning of the packet. Only the data itself is encrypted. The packet's header is confirmed at the destination end, and the encrypted contents is only accessible if the header authentication is successful. Tunnel Mode encrypts the packet itself. A new header is appended to the packet, which is then forwarded to the destination. It is used to set up a virtual private network.

A firewall is a network security device that monitors and regulates incoming and outgoing network traffic using predefined security rules. A firewall is often used to create a barrier between a trusted network and an untrustworthy network, such as the Internet.

Firewall rules are the access control method that firewalls utilize to protect your network from malicious apps and illegal access. Firewall rules govern which types of traffic are allowed and which are refused by your firewall. The firewall access policy is made up of a collection of firewall rules.

Learn more about Firewalls:
https://brainly.com/question/13098598
#SPJ1

The way that stylesheet named javafxstyles.css be applied to a JavaFX application, assuming that scene is the variable that refers to a Scene object is option C: scene.getStylesheets().add("javafxstyles.css");

A style sheet is a document that instructs a browser on how to display a page. Even aural style sheets exist to instruct speech browsers on how to pronounce various tags [coming up -1997]. CSS, or "Cascading Style Sheets," is currently recommended for use with style sheets.

The markup of a webpage provides the semantic content and structure of the page, but does not specify its visual appearance. This is known as a separation of content and presentation in web design.

Hence, Web pages are styled and laid up using CSS (Cascading Style Sheets), which can be used to change the font, color, size, and spacing of your text, divide it into numerous columns, or add animations and other ornamental elements.

Learn more about stylesheet  from

https://brainly.com/question/3246854
#SPJ1

See full question below

How would a stylesheet named javafxstyles.css be applied to a JavaFX application, assuming that scene is the variable that refers to a Scene object?

scene.addStylesheets().get("javafxstyles.css");

scene.getStylesheets().add(javafxstyles.css);

scene.getStylesheets().add("javafxstyles.css");

scene.getStyles().add("javafxstyles.css");