The number of coins Tommy has is 2,739. To find the number of coins, we need to consider the least common multiple (LCM) of 11, 13, and 14, which is the smallest number that is divisible by all three numbers. The LCM of 11, 13, and 14 is 2,739.
In order for there to always be 1 coin left when Tommy puts the coins in groups of 11, 13, and 14, the total number of coins must be one less than a multiple of the LCM. Therefore, the number of coins Tommy has is 2,739.
Let's assume the number of coins Tommy has is represented by "x." According to the given information, x must satisfy the following conditions:
1. x ≡ 1 (mod 11) - There should be 1 coin remaining when divided by 11.
2. x ≡ 1 (mod 13) - There should be 1 coin remaining when divided by 13.
3. x ≡ 1 (mod 14) - There should be 1 coin remaining when divided by 14.
By applying the Chinese Remainder Theorem, we can solve these congruences to find the unique solution for x. The solution is x ≡ 1 (mod 2002), where 2002 is the LCM of 11, 13, and 14. Adding any multiple of 2002 to the solution will also satisfy the conditions. Therefore, the general solution is x = 2002n + 1, where n is an integer.
To find the specific value of x within the given range (2000 to 3000), we can substitute different values of n and check which one falls within the range. After checking, we find that when n = 1, x = 2,739, which satisfies all the conditions. Hence, Tommy has 2,739 coins.
To learn more about LCM refer:
https://brainly.com/question/233244
#SPJ11
Economic growth typically results in rising standards of living and prosperity. However, it also invites negative externalities such as environmental degradation due to over- exploiting of natural resources. As such, the world is confronted with the dilemma of growth versus environmental sustainability. Developing a model explaining the disparity of economic development concentrating on drivers such as tourism sustainability, technological innovation and the quality of leadership would be important not only to facilitate future economic growth in developing countries, but also to the environmental and sociocultural sustainability which ultimately lead to global sustainable development. The present research objective is to develop and test framework of sustainable development by considering the elements of tourism, technological innovation, and national leadership. This further would facilitate growth, environmental and socio-cultural sustainability. Understanding the integration of these dimensions would enable the building of a Sustainable Development Framework (SDF) that would provide better insight in promoting the SDGS agenda. Ultimately, growth and environmental sustainability can be achieved which will benefit the society, the economy, and nations and of course for future sustainable policy recommendation. Based on the issue above, you are required to propose relevant econometric approaches with the aims to test sustainable development by considering the elements of tourism, technological innovation, and national leadership. Question 1 [10 marks] [CLO2] Based on the scenario above, a. Propose an appropriate model specification based on the scenario above. [4 marks] used in the [4 marks] [2 marks] b. Justify the selection of the dependent and independent variables model. c. Justify the selection of the sample period.
According to the given information, the sample period should be from 2010-2020.
a) Model specification
The model specification based on the scenario above is as follows:
SDF= f(T, TI, NL)
Where: SDF= Sustainable Development Framework
T= Tourism
TI= Technological innovation
NL= National leadership
b) Justification for the selection of the dependent and independent variables model:
Dependent variable: The dependent variable in this model is Sustainable Development Framework (SDF). The model seeks to develop a framework for sustainable development that would facilitate growth, environmental and socio-cultural sustainability.
Independent variables:
The independent variables are tourism sustainability, technological innovation, and quality of leadership. These variables drive economic development. The inclusion of tourism sustainability reflects its importance in the global economy and its potential to drive growth.
The inclusion of technological innovation reflects its potential to enhance productivity and create new industries. The inclusion of national leadership reflects the role of governance in promoting sustainable development and managing negative externalities.
c) Justification for the selection of the sample period:
The sample period should be selected based on the availability of data for the variables of interest. Ideally, the period should be long enough to capture trends and patterns in the data. However, it should not be too long that the data becomes obsolete or no longer relevant.
Additionally, the period should also reflect the context and relevance of the research question. Therefore, the sample period for this study should cover the last decade to capture the trends and patterns in the data and reflect the relevance of the research question.
The sample period should be from 2010-2020.
To know more about Model specification, visit:
https://brainly.com/question/13326948?
#SPJ11
Solve the initial value problem dy dt = etyln(y), y(0) = e³e
The solutions to the initial value problem dy/dt = etyln(y), y(0) = e³e are y = e^(e^(t + 3e)) and y = e^(-e^(t + 3e)).
The initial value problem dy/dt = etyln(y), y(0) = e³e has solutions y = e^(e^(t + 3e)) and y = e^(-e^(t + 3e)). By separating variables and integrating, the equation is transformed into ln|ln(y)| = t + 3e. After applying the initial condition, the constant of integration is determined as 3e. Considering both positive and negative cases, the solutions for y are obtained. These solutions capture the behavior of the system and satisfy the given initial condition, allowing us to understand how the dependent variable y changes with respect to the independent variable t in the given differential equation.
Learn more about differential equations: brainly.com/question/32538700
#SPJ11
Find x in the following equation. log 10 (x+6)- log 10 (x-6) = 1 (Type a fraction or an integer. Simplify your answer.) X=
According to given information, the value of x = 22/3.
To find x in the equation below.
log 10 (x + 6) - log 10 (x - 6) = 1
Solution:
We have the equation:
log 10 (x + 6) - log 10 (x - 6) = 1
Since the bases of the two logarithms are the same, we can apply the quotient rule of logarithms, which states that if we subtract two logarithms with the same base, we can simply divide the numbers inside the parentheses, so we have:
log 10 [(x + 6)/(x - 6)] = 1
We can convert this logarithmic equation to an exponential equation as follows:
10¹ = (x + 6)/(x - 6)
10(x - 6) = x + 6
Now we can expand the left side: 10x - 60 = x + 6
Subtracting x from both sides: 9x - 60 = 6
Adding 60 to both sides: 9x = 66
Dividing by 9: x = 66/9 or x = 22/3
Answer: x = 22/3.
To know more about logarithms, visit:
https://brainly.com/question/30226560
#SPJ11
what are the domain and range of the logarithmic function f(x)=log7x
Answer:
Domain: {x ∈ R : x>0} (all positive real numbers)
Range: R (all real numbers)
Step-by-step explanation:
The logarithm function is defined only for positive real numbers.
b) A C program contains the following declarations and initial assignments: int a = 4, b=8, c =9; then determine the value of the following expressions: (i) (a+b> c) ? b-3:25 (ii) b% a (iii) c+=3 (iv) (b>10) || (c<3) 2.00a) Write the output of the following program: OUTPUT #include void main() { int num = 8; while (num > 0) { printf("%d\n", num); num=num - 2; } }b) Write real, integer, character and string type for the following constant values: real i) "FINAL" ii) '\t' Strins character iii) - 154.625 iv) +2567 Intestem . c) List the THREE types of iterative statements in C programming. .d) What is the value of X for the following given expression X= 2*3+3* (2-(-3)) 2.00 1.00 1.50 1.00
The first part evaluates different C expressions, including conditional, arithmetic, and logical operations. The second part covers the output of a program, data types of constants, types of iterative statements, and the value of an arithmetic expression.
(i) The value of the expression (a+b > c) ? b-3 : 25 will be 5 since the condition (a+b > c) is false, so the second value after the colon is selected, which is 25.
(ii) The value of the expression b % a will be 0 since the modulus operator (%) returns the remainder of the division of b by a, and 8 divided by 4 has no remainder.
(iii) After the assignment c += 3, the value of c will be 12. The += operator adds the right operand (3) to the current value of c and assigns the result back to c.
(iv) The value of the expression (b > 10) || (c < 3) will be 1 (true) because at least one of the conditions is true. Since b (8) is not greater than 10, the second condition (c < 3) is evaluated, and since c (9) is not less than 3, the expression evaluates to true.
Q3.a) The program in question will output the following sequence of numbers:
8
6
4
2
Q3.b) The types of the given constant values are:
i) String type (array of characters): "FINAL"
ii) Character type: '\t' (represents a tab character)
iii) Real type (floating-point number): -154.625
iv) Integer type: +2567
Q3.c) The three types of iterative statements in C programming are:
i) The for loop: It repeatedly executes a block of code for a specified number of times.
ii) The while loop: It repeatedly executes a block of code as long as a specified condition is true.
iii) The do-while loop: It is similar to the while loop, but it guarantees that the code block is executed at least once before checking the condition.
Q3.d) The value of X for the given expression X = 2 * 3 + 3 * (2 - (-3)) will be 17. The expression follows the order of operations (parentheses first, then multiplication and addition from left to right). The expression inside the parentheses evaluates to 5, and then the multiplication and addition are performed accordingly.
To learn more about modulus operator click here: brainly.com/question/13103168
#SPJ11
Q2. b) A C program contains the following declarations and initial assignments: int a = 4, b=8, c =9; then determine the value of the following expressions: (i) (a+b> c) ? b-3:25 (ii) b% a (iii) c+=3 (iv) (b>10) || (c<3) 2.00 Q3. a) Write the output of the following program: OUTPUT #include <stdio.h> void main() { int num = 8; while (num > 0) { printf("%d\n", num); num=num - 2; } } Q3.b) Write real, integer, character and string type for the following constant values: real i) "FINAL" ii) '\t' Strins character iii) - 154.625 iv) +2567 Intestem Q3. c) List the THREE types of iterative statements in C programming. Q3.d) What is the value of X for the following given expression X= 2*3+3* (2-(-3)) 2.00 1.00 1.50 1.00
PLS HELP NEED TODAY The school booster club is hosting a dinner plate sale as a fundraiser. They will choose any combination of barbeque plates and vegetarian plates to sell and want to earn at least $2,000 from this sale.
If barbeque plates cost $8.99 each and vegetarian plates cost $6.99 each, write the inequality that represents all possible combinations of barbeque plates and y vegetarian plates.
Answer:
Step-by-step explanation:
Let x be the number of barbecue plates and y the number of vegetarian plates.
The required inequality is:
[tex]8.99x+6.99y\geq2,000[/tex]
9. Evaluate the following integral with Gauss quadrature formula: \[ I=\int_{0}^{\infty} e^{-x} d x \]
To evaluate the integral using the Gauss quadrature formula, we first need to express the integral as a definite integral over a finite interval. We can do this by making a substitution: [tex]\sf u = e^{-x}[/tex]. The limits of integration will also change accordingly.
When [tex]\sf x = 0[/tex], [tex]\sf u = e^{-0} = 1[/tex].
When [tex]\sf x = \infty[/tex], [tex]\sf u = e^{-\infty} = 0[/tex].
So the integral can be rewritten as:
[tex]\sf I = \int_{0}^{\infty} e^{-x} dx = \int_{1}^{0} -\frac{du}{u}[/tex]
Now, we can apply the Gauss quadrature formula, which states that for the integral of a function [tex]\sf f(x)[/tex] over an interval [tex]\sf [a, b][/tex], we can approximate it using the weighted sum:
[tex]\sf I \approx \sum_{i=1}^{n} w_i f(x_i)[/tex]
where [tex]\sf w_i[/tex] are the weights and [tex]\sf x_i[/tex] are the nodes.
For our specific integral, we have [tex]\sf f(u) = -\frac{1}{u}[/tex]. We can use the Gauss-Laguerre quadrature formula, which is specifically designed for integrating functions of the form [tex]\sf f(u) = e^{-u} g(u)[/tex].
Using the Gauss-Laguerre weights and nodes, we have:
[tex]\sf I \approx \frac{1}{2} \left( f(x_1) + f(x_2) \right)[/tex]
where [tex]\sf x_1 = 0.5858[/tex] and [tex]\sf x_2 = 3.4142[/tex].
Plugging in the function values and evaluating the expression, we get:
[tex]\sf I \approx \frac{1}{2} \left( -\frac{1}{x_1} - \frac{1}{x_2} \right) \approx \frac{1}{2} \left( -\frac{1}{0.5858} - \frac{1}{3.4142} \right) \approx 0.5[/tex]
Therefore, the approximate value of the integral using the Gauss quadrature formula is [tex]\sf I \approx 0.5[/tex].
[tex]\huge{\mathfrak{\colorbox{black}{\textcolor{lime}{I\:hope\:this\:helps\:!\:\:}}}}[/tex]
♥️ [tex]\large{\underline{\textcolor{red}{\mathcal{SUMIT\:\:ROY\:\:(:\:\:}}}}[/tex]
The integral can be found in more than one way. First use integration by parts, then expand the expression and integrate the result [(x - 5)(x+4)² dx Identify u and dv when integrating this expression using integration by parts. u= dv= dx Expand the terms within the integrand. dx (Simplify your answer.) Evaluate the integral. √(x - 5)(x+4)² dx = [
Given integral is ∫ √(x - 5)(x+4)² dx We can evaluate the given integral by using integration by parts method.
Step 1: Identify u and dvu = √(x - 5)dv = (x+4)² dx
Step 2: Expand dv by taking it as v Expand (x+4)²dx
=> v = ∫(x+4)²dx
=> v = ∫ (x² + 8x + 16)dx
=> v = (x³/3) + 4x² + 16x + C
Step 3: Simplify u√(x - 5) = (x - 5)⁽¹/²⁾
Step 4: Substitute the values obtained in step 2 and step 3 in the formula∫ u dv = uv - ∫ v du∫ √(x - 5)(x+4)² dx
= (x-5)^(1/2) [(x³/3) + 4x² + 16x] - ∫[(x³/3) + 4x² + 16x + C] * (1/2(x-5)^(1/2)) dx∫ √(x - 5)(x+4)² dx
= (x-5)^(1/2) [(x³/3) + 4x² + 16x] - 1/2 ∫(x³/3)dx - ∫ 4x² dx - ∫16x dx - C/2 ∫(x-5)^(1/2)dx∫ √(x - 5)(x+4)² dx
= (x-5)^(1/2) [(x³/3) + 4x² + 16x] - 1/6 x³ - 4/3 x³ - 8x² - C/2 [ 2/3 (x-5)^(3/2) ] + C
The value of the given integral is∫ √(x - 5)(x+4)² dx
= (x-5)^(1/2) [(x³/3) + 4x² + 16x] - 1/6 x³ - 4/3 x³ - 8x² - C/2 [ 2/3 (x-5)^(3/2) ] + C.
To know more about integration visit :-
https://brainly.com/question/30094386
#SPJ11
Assume that you are the Chief Financial Officer of a bank. It is your responsibility to establish policies that generate the highest possible return on bank investments for a given level of risk. From a purely financial perspective, which of the following would be in the best interests of the bank? a. Require all borrowers to pay interest on loans quarterly. b. Require all borrowers to pay interest on loans annually. c. Require all borrowers to pay interest on loans semi-annually. d. Require all borrowers to pay interest on loans monthly.
From a purely financial perspective, (option) d. requiring all borrowers to pay interest on loans monthly would be in the best interests of the bank.
When borrowers pay interest on loans more frequently, such as monthly, it allows the bank to receive cash inflows at a faster rate. This improves the bank's cash flow position and enables them to use the funds for further investments or lending activities. Additionally, receiving interest payments more frequently reduces the risk of default and provides a steady stream of income for the bank.
Requiring borrowers to pay interest on loans quarterly, annually, or semi-annually would result in longer intervals between interest payments. This could lead to cash flow challenges for the bank, especially if they rely on the interest income to cover their own expenses or invest in other opportunities. It also increases the risk of default, as borrowers may find it harder to make larger lump sum payments compared to more frequent smaller payments.
In summary, requiring borrowers to pay interest on loans monthly would provide the bank with regular and consistent cash inflows, reduce default risk, and allow for better cash flow management, ultimately maximizing the bank's return on investments for a given level of risk.
To learn more about cash inflows click here: brainly.com/question/31621747
#SPJ11
What is the simple interest rate on a $1450 investment paying
$349.16 interest in 5.6 years?
The simple interest rate on a $1450 investment paying $349.16 interest in 5.6 years is approximately 4.37%.
The simple interest rate can be calculated using the formula:
Simple Interest = Principal * Interest Rate * Time
We can rearrange the formula to solve for the interest rate:
Interest Rate = Simple Interest / (Principal * Time)
Substituting the given values:
Principal = $1450
Simple Interest = $349.16
Time = 5.6 years
Interest Rate = $349.16 / ($1450 * 5.6)
Calculating the interest rate:
Interest Rate = 349.16 / (1450 * 5.6) ≈ 0.0437 or 4.37%
Therefore, the simple interest rate on a $1450 investment, paying $349.16 interest in 5.6 years, is approximately 4.37%.
Learn more about interest rate
brainly.com/question/28272078
#SPJ11
The probability that a grader will make a marking error on any particular question of a multiple-choice exam is .1. If there are ten questions and questions are marked independently, what is the probability that no errors are made? That at least one error is made? If there are n questions and the probability of a marking error is p rather than .1, give expressions for these two probabilities
These expressions hold true for any value of n and p, representing the probability of no errors and at least one error, respectively, in a binomial distribution with independent trials.
P(at least one error) = 1 - P(no errors).If the probability of a grader making a marking error on any particular question is 0.1, and there are ten questions marked independently,
we can calculate the probability of no errors and at least one error using the binomial distribution.
The probability of no errors is given by:
P(no errors) = (1 - probability of error)^number of trials
P(no errors) = (1 - 0.1)^10 = 0.9^10 ≈ 0.3487
The probability of at least one error is the complement of the probability of no errors:
P(at least one error) = 1 - P(no errors) = 1 - 0.3487 ≈ 0.6513
Now, if there are n questions and the probability of a marking error is p, the expressions for the probabilities are as follows:
P(no errors) = (1 - p)^n
P(at least one error) = 1 - P(no errors)
These expressions hold true for any value of n and p, representing the probability of no errors and at least one error, respectively, in a binomial distribution with independent trials.
Learn more about probability here: brainly.com/question/31828911
#SPJ11
Suppose that a new-treatment is successful in curing a common alment. 67 \% of the time. If the treatment is tried on a random sample of 120 patients. appreximate the probability that at most: 79 wa be cured. Use the normal appraximation to the binomial with a correction for continu ty. Haund yout answer to at least three decimat places. Do not round any intermediate steps. (if necessary; consult a list of formulas.)
We are given that a new-treatment is successful in curing a common alment 67% of the time. We have to find the probability that at most 79 patients will be cured in a sample of 120 patients.\
Probability of success (curing an ailment) p = 67% or 0.67 and probability of failure q = 1 - p = 1 - 0.67 = 0.33Total number of patients n = 120We are to find the probability of at most 79 patients cured. We can use the formula for binomial distribution for this calculation. We use the normal approximation to the binomial distribution with a correction for continuity, as n is large enough.Let X be the number of patients cured.Then X ~ B(120, 0.67)Here we will use the normal distribution approximation.µ = np = 120 × 0.67 = 80.4σ = sqrt (npq) = sqrt (120 × 0.67 × 0.33) ≈ 4.285Now, applying the continuity correction, we getP(X ≤ 79) = P(X < 79.5)
As normal distribution is continuous and it is not possible to get exactly 79 cured patients.So, P(X ≤ 79) = P(Z ≤ (79.5 - µ) / σ)Here, Z is the standard normal variable.µ = 80.4σ = 4.285Z = (79.5 - 80.4) / 4.285 ≈ -0.21Therefore,P(X ≤ 79) = P(Z ≤ -0.21)≈ 0.4168 (rounded to four decimal places)Hence, the required probability is approximately 0.4168.
To know more about probability visit:
https://brainly.com/question/31828911
#SPJ11
Length of skatebosrds in a skateshop are normally distributed with a mean of 31.3 in and a standard devlation of 0.2 in. The figure below shows the distubution of the length of nkateboards in a skateshop. Calculate the shaded area under the curve. Express your answer in decimal form with at least two decimal place accuracy.
The percentage of area under the shaded curve would be 81.86%
Here, we have,
It is given to us that the mean[tex](\mu)[/tex] = 32
and standard deviation[tex](\sigma)[/tex] = 0.8
We need to find the Z-score for the interval (31.2, 33.8)
The formula for Z-score is Z = [tex]\frac{X - \mu}{\sigma}[/tex]
For X = 33.6,
Z = [tex]\frac{33.6 - 32}{0.8}[/tex]
= 2
Similarly for X = 31.2
Z = [tex]\frac{31.2 - 32}{0.8}[/tex]
= -1
we can consider -1 as 1 because the negative sign only denotes the part of graph to the left side of mean.
Checking the z-values in the table we can find the answer to be = 0.8186
Alternatively,
We know that 68.27% of the area falls under 1 standard deviation of the mean and 95.25% under 2 standard deviation of the mean.
Thus we can find the area in percentage by finding [tex]\frac{68.27}{2} + \frac{95.25}{2}[/tex]
(We are dividing the percentage by two because the whole percentage i.e. 68.27% and 95.25% lie on both the sides of the mean.)
Thus we get the percentage of area under the shaded curve would be 81.86%.
Learn more about standard deviation here:
brainly.com/question/23907081
#SPJ4
Find y1 and y2. m₁ = m₂ = 1kg k = 1 N/m 1 Masses on springs are negligible. 1 • = 0,4; Q = 1,35 –– Q. Initial conditions: Y₁0/=Y2\ y₁ 1.3% = -1 (a) Solve using eigenvalue & eigenvector problem. (b) Solve using Laplace transform. 12 wowow h 2. (5 points) (5 points)
We are given the masses m₁ = m₂ = 1 kg and the spring constant k = 1 N/m. The initial conditions are y₁₀ = 0.4 and y₂₀ = 1.35.
We need to solve the system of equations for y₁ and y₂ using two different methods: (a) the eigenvalue and eigenvector problem, and (b) the Laplace transform.
(a) To solve the system using the eigenvalue and eigenvector method, we first need to find the eigenvalues and eigenvectors of the system. The eigenvalue problem is given by the equation (m₁m₂)" + (k(m₁ + m₂)) = 0. By substituting the values, we get (1 1)(" + 2) = 0. The characteristic equation is ² + 2 = 0, which gives us eigenvalues ₁ = 0 and ₂ = -2. The corresponding eigenvectors are ₁ = (1, -1) and ₂ = (1, 1). Therefore, the general solution is = ₁₁⁰ + ₂₂^(-2), where ₁ and ₂ are constants determined by the initial conditions.
(b) To solve the system using the Laplace transform, we apply the Laplace transform to each equation in the system. We get ²₁ - ₁₀ + 2₁ = 0 and ²₂ - ₂₀ + 2₂ = 0. Rearranging the equations, we have (² + 2)₁ = ₁₀ and (² + 2)₂ = ₂₀. Solving for ₁ and ₂, we get ₁ = (₁₀) / (² + 2) and ₂ = (₂₀) / (² + 2). Taking the inverse Laplace transform, we obtain ₁ = ₁₀⁻¹[ / (² + 2)] and ₂ = ₂₀⁻¹[ / (² + 2)].
In both methods, the constants ₁ and ₂ (for the eigenvalue and eigenvector method) or ₁₀ and ₂₀ (for the Laplace transform method) can be determined using the initial conditions.
To learn more about eigenvector click here:
brainly.com/question/31669528
#SPJ11
Please use the accompanying Excel data set or accompanying Text file data set when completing the following exercise. Fifteen adult males between the ages of 35 and 50 participated in a study to evaluate the effect of diet and exercise on blood cholesterol levels. The total cholesterol was measured in each subject initially and then three months after participating in an aerobic exercise program and switching to a low-fat diet. The data are shown in the following table. Blood Cholesterol Level
The data in the table supports the claim that a low-fat diet and exercise reduce blood cholesterol levels.
What does the data show?The data presented compares the cholesterol levels before and after the treatment. In this, we can observe that:
The cholesterol levels before the treatment were higher than after the treatment in all the subjects.The minimum decrease was 1, while the maximum decrease or change in the cholesterol level was 55 for subject 4.Based on this, the data is enough to support the claim that a low-fat diet and exercise reduce blood cholesterol levels.
Note: This question is incomplete; here is the missing information:
Do the data support the claim that a low-fat diet and aerobic exercise are of value in producing a reduction in blood cholesterol levels?
Learn more about claims in https://brainly.com/question/22898077
#SPJ4
The results indicated that diet and exercise have a positive effect on cholesterol levels and can be used as a preventive measure for individuals with high cholesterol levels.
The study was conducted to evaluate the effect of diet and exercise on blood cholesterol levels of adult males between the ages of 35 and 50.
A sample size of 15 participants was selected for the study.
The initial total cholesterol level of each subject was measured before participating in an aerobic exercise program and shifting to a low-fat diet.
After three months, the total cholesterol level was measured again and the results are tabulated in the table below:
Blood Cholesterol Level
The study showed that there was a significant decrease in blood cholesterol levels of the participants after participating in an aerobic exercise program and shifting to a low-fat diet for three months.
The results indicated that diet and exercise have a positive effect on cholesterol levels and can be used as a preventive measure for individuals with high cholesterol levels.
Learn more about diet from the given link
https://brainly.com/question/1110332
#SPJ11
Scenario 4. A researcher wants to explore whether stress increases after experiencing sleep deprivation. She measures participants stress levels before and after staying up for one night. Question 11 1 pts What is the most appropriate test statistic to use to test the hypothesis in scenario 4 ? T-test for the significance of the correlation coefficient A. One-way ANOVA B. Correlation Coefficient C. Z-score
D. Regression Analysis E. P-test F. Independent samples t-Test G. One sample Z-test H. F-test I. Dependent samples t-Test
The most appropriate test statistic to use to test the hypothesis in scenario 4 is the dependent samples t-test. This is because the researcher is measuring the same participants before and after a treatment (staying up for one night).
The dependent samples t-test is used to compare the means of two groups when the data is paired. In this case, the two groups are the participants' stress levels before and after staying up for one night.
The dependent samples t-test is a parametric test. This means that it makes certain assumptions about the data, such as that the data is normally distributed and that the variances of the two groups are equal. If these assumptions are not met, then the results of the test may be unreliable.
The dependent samples t-test is calculated using the following formula:
t = (M1 - M2) / SE
where:
M1 is the mean of the first group
M2 is the mean of the second group
SE is the standard error of the difference between the means
The standard error of the difference between the means is calculated using the following formula:
SE = sqrt(σ^2/n1 + σ^2/n2)
where:
σ is the standard deviation of the population
n1 is the sample size of the first group
n2 is the sample size of the second group
The dependent samples t-test is a powerful test. This means that it is able to detect even small differences between the means of the two groups. However, the test is also sensitive to violations of the assumptions. Therefore, it is important to check the assumptions before conducting the test.
Learn more about standard deviation here:
brainly.com/question/16555520
#SPJ11
Find the indicated derivative for the function. f''(x) for f(x) = 6x6 - 3x5 +7x-8 f''(x) = 0
To find the indicated derivative for the function f(x) = 6x^6 - 3x^5 + 7x - 8, we need to take the second derivative of the function.
Let's begin by finding the first derivative of the function
.Step 1: Find the first derivative of f(x)
f'(x) = d/dx(6x^6 - 3x^5 + 7x - 8)
= 36x^5 - 15x^4 + 7
The first derivative of f(x) is
f'(x) = 36x^5 - 15x^4 + 7.
Now we need to find the second derivative of f(x).
Step 2: Find the second derivative of f(x)f''(x) = d/dx(36x^5 - 15x^4 + 7)
= 180x^4 - 60x^3
The second derivative of f(x) is
f''(x) = 180x^4 - 60x^3.
Therefore, f''(x) = 180x^4 - 60x^3
for f(x) = 6x^6 - 3x^5 + 7x - 8.
However, the question asks us to find the value of f''(x) when it equals 0. Setting f''(x) = 0 and solving for x,
we get:0 = 180x^4 - 60x^3
Factor out 60x^3:0
= 60x^3 (3x - 1)
Solve for x:
60x^3 = 0
or 3x - 1
= 0x
= 0
or x = 1/3
Therefore, the values of x for which f''(x) = 0 are
x = 0
and x = 1/3.
To know more about derivative visit :-
https://brainly.com/question/23819325
#SPJ11
Graph the volume generated by rotating the region bounded by f(x) = x and g(x) = - that lies between x = 1 and x = 4 and about the x-axis. NOTE: Graph needs to be complete: show points, label lines, show rotation, shade volume.
To graph the volume generated by rotating the region bounded by the functions f(x) = x and g(x) = -x that lie between x = 1 and x = 4 about the x-axis, we can follow these steps:
1. Plot the graphs of f(x) = x and g(x) = -x in the given interval.
- The graph of f(x) = x is a straight line passing through the origin with a positive slope.
- The graph of g(x) = -x is a straight line passing through the origin with a negative slope.
2. Identify the region bounded by the two functions within the given interval.
- The region is the area between the two graphs from x = 1 to x = 4.
3. Visualize the rotation of this region about the x-axis.
- Imagine the region rotating around the x-axis, forming a solid shape.
4. Shade the volume generated by the rotation.
- Shade the solid shape formed by the rotation.
Visit here to learn more about graph brainly.com/question/17267403
#SPJ11
Only about 16% of all people can wiggle their ears. Is this percent higher for millionaires? Of the 37 millionaires surveyed, 10 could wiggle their ears. Run a hypothesis test to see if the percent of millionaires who can wiggle their ears is more than 16% at the α=0.05 level of significance? Use the classical approach.
As the test statistic is greater than the critical value for the right tailed test, there is enough evidence to conclude that the percent of millionaires who can wiggle their ears is more than 16% at the α=0.05 level of significance.
How to obtain the test statistic?The equation for the test statistic in this problem is given as follows:
[tex]z = \frac{\overline{p} - p}{\sqrt{\frac{p(1-p)}{n}}}[/tex]
In which the parameters are listed as follows:
[tex]\overline{p}[/tex] is the sample proportion.p is the expected proportion.n is the sample size.The parameter values for this problem are given as follows:
[tex]n = 37, \overline{p} = \frac{10}{37} = 0.27, \pi = 0.16[/tex]
Hence the test statistic is given as follows:
[tex]z = \frac{0.27 - 0.16}{\sqrt{\frac{0.16(0.84)}{37}}}[/tex]
z = 1.83.
The critical value for a right-tailed test with a significance level of 0.05 is given as follows:
z = 1.645.
More can be learned about the z-distribution at https://brainly.com/question/25890103
#SPJ4
1. Let the distribution of X be the normal distribution N (μ, σ2) and let Y = aX + b. Prove that Y is distributed as N (aμ + b, a2σ2).
2. Let X and Y be two independent random variables with E|X| < [infinity], E|Y| < [infinity] and E|XY| < [infinity]. Prove that E[XY] = E[X]E[Y].
1 Y is distributed as N(aμ + b, a^2σ^2), as desired.
2 We have shown that under these conditions, E[XY] = E[X]E[Y].
To prove that Y is distributed as N(aμ + b, a^2σ^2), we need to show that the mean and variance of Y match those of a normal distribution with parameters aμ + b and a^2σ^2, respectively.
First, let's find the mean of Y:
E(Y) = E(aX + b) = aE(X) + b = aμ + b
Next, let's find the variance of Y:
Var(Y) = Var(aX + b) = a^2Var(X) = a^2σ^2
Therefore, Y is distributed as N(aμ + b, a^2σ^2), as desired.
We can use the definition of covariance to prove that E[XY] = E[X]E[Y]. By the properties of expected value, we know that:
E[XY] = ∫∫ xy f(x,y) dxdy
where f(x,y) is the joint probability density function of X and Y.
Then, we can use the fact that X and Y are independent to simplify the expression:
E[XY] = ∫∫ xy f(x) f(y) dxdy
= ∫ x f(x) dx ∫ y f(y) dy
= E[X]E[Y]
where f(x) and f(y) are the marginal probability density functions of X and Y, respectively.
Therefore, we have shown that under these conditions, E[XY] = E[X]E[Y].
Learn more about distributed here:
https://brainly.com/question/29664127
#SPJ11
Use the linear approximation for ƒ (x, y) = √√√y² – x² at (3, 5) to estimate f(2.98, 5.02). (do not use a calculator; enter your answer as a decimal)
The linear approximation of ƒ (x, y) = √√√y² – x² at (3, 5) is L(x, y) = 2 – 0.02x + 0.04y. The estimate of f(2.98, 5.02) using the linear approximation is 2.999998.
The linear approximation of a function at a point is a linear function that best approximates the function near that point. The linear approximation of ƒ (x, y) = √√√y² – x² at (3, 5) is given by
L(x, y) = ƒ(3, 5) + ƒ_x(x – 3) + ƒ_y(y – 5)
where ƒ_x and ƒ_y are the partial derivatives of ƒ at (3, 5).
Substituting the values of ƒ(3, 5), ƒ_x, and ƒ_y, we get
L(x, y) = 2 – 0.02x + 0.04y
The estimate of f(2.98, 5.02) using the linear approximation is obtained by substituting x = 2.98 and y = 5.02 into L(x, y). This gives
L(2.98, 5.02) = 2 – 0.02(2.98) + 0.04(5.02) = 2.999998
Note: The linear approximation is only an approximation, and the actual value of f(2.98, 5.02) may be slightly different from the estimate.
Learn more about linear approximation here:
brainly.com/question/30881351
#SPJ11
A cable provider wants to contact customers in a particular telephone exchange to see how satisfied they are with the new digital TV service the company has provided. All numbers are in the 452 exchange, so there are 10 000 possible numbers from 452-0000 to 452-9999. Assume they select the numbers with equal probability.
a) What distribution would they use to model the selection.
b) The new business "incubator" was assigned the 500 numbers between 452-2000 and 452 dash 2499, but these new businesses don't subscribe to digital TV. What is the probability that the randomly selected number will be for an incubator business?
c) Numbers above 8000 were only released for domestic use last year, so they went to newly constructed residences. What is the probability that a randomly selected number will be one of these?
a) the phone numbers chosen from 452-0000 to 452-9999 must be modeled with a Uniform Distribution.b)the probability that the randomly selected number will be for an incubator business is 5%.c)the probability that a randomly selected number will be one of these is 20%.
a) Uniform Distribution is the distribution that they would use to model the selection.The cable provider wishes to contact consumers in a particular telephone exchange to assess their satisfaction with the new digital TV service provided by the firm. As a result, the phone numbers chosen from 452-0000 to 452-9999 must be modeled with a Uniform Distribution.
b) There are 500 phone numbers in the 452-2000 to 452-2499 range, therefore the likelihood of calling an incubator firm is 500/10000=0.05 or 5%.So, the probability that the randomly selected number will be for an incubator business is 5%.
c) There are 2000 numbers from 452-8000 to 452-9999 in total. So the probability that a randomly selected number will be one of these is 2000/10000 or 0.2 or 20%.Therefore, the probability that a randomly selected number will be one of these is 20%.
Hence, the above mentioned are the answers to the given problem.
Learn more about incubator here,
https://brainly.com/question/15235149
#SPJ11
Let B-and C-13). Find BC. 2 3 C= -3
To find the product of matrices B and C, we multiply the corresponding elements of the matrices and sum them up. Given the matrices B = (1, -3) and C = (2, 3), the product BC is equal to -3.
The given matrices B and C are:
B = (1, -3)
(0, 1)
C = (2, 3)
(-3, 2)
To find the product BC, we need to multiply the corresponding elements of the matrices and sum them up.
The element at the first row and first column of BC is obtained by multiplying the first row of B (1, -3) with the first column of C (2, -3).
So, (1 * 2) + (-3 * -3) = 2 + 9 = 11.
The element at the first row and second column of BC is obtained by multiplying the first row of B (1, -3) with the second column of C (3, 2).
So, (1 * 3) + (-3 * 2) = 3 - 6 = -3.
The element at the second row and first column of BC is obtained by multiplying the second row of B (0, 1) with the first column of C (2, -3).
So, (0 * 2) + (1 * -3) = -3.
The element at the second row and second column of BC is obtained by multiplying the second row of B (0, 1) with the second column of C (3, 2).
So, (0 * 3) + (1 * 2) = 2.
Therefore, the product BC is:
BC = (11, -3)
(-3, 2)
Hence, BC is equal to:
BC = (-3)
To learn more about product of matrices click here: brainly.com/question/30589911
#SPJ11
A simple random sample of size n is drawn. The sample mean, x
ˉ
, is found to be 18.1, and the sample standard deviation, s, is found to be 4.4. Click the icon to view the table of areas under the t-distribution. (a) Construct a 95% confidence interval about μ if the sample size, n e
is 35. Lower bound: : Upper bound: (Use ascending order. Round to two decimal places as needed.) (b) Construct a 95% confidence interval about μ if the 6 ample size, n, it 51. Lower bound: Upper bound: (Use ascending order. Round to two decimal places as needed.) How does increasing the sample size affect the margin of error, E? A. The margin of error increases. B. The margin of error decreases. C. The margin of error does not change. (c) Connruct a 99% confidence interval about μ if the sample size, n 4
is 35 . Lower bound: Upper bound: (Use ascending order. Round to two decimal places an needed) Compare the results to those obtained in part (a). How does increasing the level of confidence affect the size of the margin of error, E? A. The margin of error does not change.
a) The 95% confidence interval about μ with a sample size of n = 35 is approximately (16.14, 20.06).
b) The 95% confidence interval about μ with a sample size of n = 51 is approximately (16.21, 19.99).
c) The 99% confidence interval about μ with a sample size of n = 35 is approximately (15.76, 20.44).
Here, we have,
(a) To construct a 95% confidence interval about the population mean μ with a sample size of n = 35, we can use the t-distribution. The formula for the confidence interval is:
Lower bound: x - t(n-1, α/2) * (s/√n)
Upper bound: x + t(n-1, α/2) * (s/√n)
Given that x= 18.1, s = 4.4, and n = 35, we need to find the value of t(n-1, α/2) from the t-distribution table. The degrees of freedom for a sample of size n = 35 is df = n - 1 = 34.
From the t-distribution table with a confidence level of 95%, we find the critical value for α/2 = 0.025 and df = 34 to be approximately 2.032.
Plugging in the values, we can calculate the confidence interval:
Lower bound: 18.1 - 2.032 * (4.4/√35)
Upper bound: 18.1 + 2.032 * (4.4/√35)
Calculating the values:
Lower bound ≈ 16.14
Upper bound ≈ 20.06
Therefore, the 95% confidence interval about μ with a sample size of n = 35 is approximately (16.14, 20.06).
(b) To construct a 95% confidence interval about μ with a sample size of n = 51, we follow the same process as in part (a). The only difference is the degrees of freedom, which is df = n - 1 = 50.
Using the t-distribution table, we find the critical value for α/2 = 0.025 and df = 50 to be approximately 2.009.
Plugging in the values, we can calculate the confidence interval:
Lower bound: 18.1 - 2.009 * (4.4/√51)
Upper bound: 18.1 + 2.009 * (4.4/√51)
Calculating the values:
Lower bound ≈ 16.21
Upper bound ≈ 19.99
Therefore, the 95% confidence interval about μ with a sample size of n = 51 is approximately (16.21, 19.99).
(c) To construct a 99% confidence interval about μ with a sample size of n = 35, we follow the same process as in part (a) but with a different critical value from the t-distribution table.
For a 99% confidence level, α/2 = 0.005 and df = 34, the critical value is approximately 2.728.
Plugging in the values, we can calculate the confidence interval:
Lower bound: 18.1 - 2.728 * (4.4/√35)
Upper bound: 18.1 + 2.728 * (4.4/√35)
Calculating the values:
Lower bound ≈ 15.76
Upper bound ≈ 20.44
Therefore, the 99% confidence interval about μ with a sample size of n = 35 is approximately (15.76, 20.44).
To learn more about the confidence interval, visit:
brainly.com/question/17097944
#SPJ4
Manny creates a new type of bowling ball. His new model knocked down an average of 9.43 pins, with a standard deviation of 1.28 pins. The older model bowling ball knocked down 7.72 pins on average, with a standard deviation of 3.56 pins. He tested each bowling ball model 10 times. What is the effect size of the difference in the bowling ball mõndels? (Write your answer below, to two decimal places as a positive value; sign doesn't matter)
The effect size of the difference in the bowling ball models is 0.48.
Explanation: Effect size refers to the degree of difference between two groups. The difference between two groups is often determined using the standardized mean difference.
The difference between the mean of two groups, divided by the standard deviation of one of the groups, is known as the standardized mean difference.
For this question, Manny creates a new type of bowling ball. His new model knocked down an average of 9.43 pins, with a standard deviation of 1.28 pins.
The older model bowling ball knocked down 7.72 pins on average, with a standard deviation of 3.56 pins.
He tested each bowling ball model 10 times.
Now we need to find the effect size of the difference in the bowling ball models.
The formula to calculate the effect size using standardized mean difference is:
Effect size = (Mean of new model - Mean of old model) / Standard deviation of the old model
Effect size = (9.43 - 7.72) / 3.56
Effect size = 0.48
Therefore, the effect size of the difference in the bowling ball models is 0.48.
To know more about difference visit
https://brainly.com/question/1852309
#SPJ11
The effect size of the difference in the bowling ball models is approximately 1.34.
The effect size of the difference in the bowling ball models can be computed using Cohen's d formula.
Cohen's d formula is a statistical measurement that compares the difference between two means in terms of standard deviation.
It is the difference between two means, divided by the standard deviation.
Cohen's d formula can be expressed as:d = (M1 - M2) / SD
Where:
M1 is the mean score for group 1
M2 is the mean score for group 2
SD is the pooled standard deviation
The effect size of the difference in the bowling ball models is as follows:
[tex]d = (9.43 - 7.72) / \sqrt{((1.28^2 + 3.56^2) / 2 * 10 / (10 - 1))[/tex]
d = 1.3443
Therefore, the effect size of the difference in the bowling ball models is approximately 1.34.
To know more about statistical measurement, visit:
https://brainly.com/question/31036349
#SPJ11
The following problem involves an equation of the form = f(y). dy dt Sketch the graph of f(y) versus y, determine the critical (equilibrium) points, and classify each one as asymptotically stable or unstable. Draw the phase line, and sketch several graphs of solutions in the ty-plane. dy = = y(y − 2)(y — 4), yo≥0 dt The function y(t) = 0 is Choose one▾ The function y(t) = 2 is Choose one The function y(t) = 4 is Choose one ▾
To sketch the graph of f(y) versus y, we need to analyze the behavior of the function f(y) = y(y - 2)(y - 4).
1. Critical Points:
To find the critical points, we set f(y) = 0:
y(y - 2)(y - 4) = 0
This equation is satisfied when y = 0, y = 2, or y = 4.
2. Stability Analysis:
We can determine the stability of each critical point by considering the sign of f'(y) on intervals between the critical points.
Interval (-∞, 0):
Choosing a test value within this interval, such as y = -1, we evaluate f'(-1) = (-1)(-1 - 2)(-1 - 4) = 15.
Since f'(-1) > 0, this indicates that f(y) is increasing on (-∞, 0), suggesting that y = 0 is an unstable critical point.
Interval (0, 2):
Choosing a test value within this interval, such as y = 1, we evaluate f'(1) = (1)(1 - 2)(1 - 4) = 3.
Since f'(1) > 0, this indicates that f(y) is increasing on (0, 2), suggesting that y = 2 is an unstable critical point.
Interval (2, 4):
Choosing a test value within this interval, such as y = 3, we evaluate f'(3) = (3)(3 - 2)(3 - 4) = -3.
Since f'(3) < 0, this indicates that f(y) is decreasing on (2, 4), suggesting that y = 4 is a stable critical point.
Interval (4, ∞):
Choosing a test value within this interval, such as y = 5, we evaluate f'(5) = (5)(5 - 2)(5 - 4) = 15.
Since f'(5) > 0, this indicates that f(y) is increasing on (4, ∞), suggesting that there are no critical points within this interval.
3. Phase Line and Solution Sketches:
Based on the stability analysis, we can draw the phase line as follows:
↑ unstable stable ↑
-∞ ------o----------------o------ ∞
0 4
The critical point y = 0 is unstable, and the critical point y = 2 is also unstable. The critical point y = 4 is stable.
To sketch several graphs of solutions in the ty-plane, we can start with initial conditions y(0) = 1, y(0) = 3, and y(0) = 5. These initial conditions correspond to points on the phase line.
1. For y(0) = 1, the solution will start from the unstable critical point y = 0 and diverge towards infinity.
2. For y(0) = 3, the solution will also start from the unstable critical point y = 2 and diverge towards infinity.
3. For y(0) = 5, the solution will start from the stable critical point y = 4 and converge towards it.
These sketches of solutions will help visualize the behavior of the system over time.
Please note that the function y(t) = 0 is not a solution to the given differential equation, as it does not satisfy the equation dy/dt = f(y). Similarly, the functions y(t) = 2 and y(t) = 4 are not solutions either. They represent the critical points where the derivative dy/dt is zero.
Visit here to learn more about graph brainly.com/question/17267403
#SPJ11
A baseball player has a batting average of 0.235. What is the
probability that he has exactly 3 hits in his next 7 at bats?
(round to 4 decimal places)
The probability that the baseball player has exactly 3 hits in his next 7 at-bats, given a batting average of 0.235, is approximately (rounded to four decimal places).
To calculate the probability, we can use the binomial probability formula. In this case, the player has a fixed probability of success (getting a hit) in each at-bat, which is represented by the batting average (0.235). The number of successes (hits) in a fixed number of trials (at-bats) follows a binomial distribution.
Using the binomial probability formula P(x; n, p) = C(n, x) * p^x * (1-p)^(n-x), where x is the number of successes, n is the number of trials, and p is the probability of success, we can calculate P(3; 7, 0.235).
Plugging in the values x = 3, n = 7, and p = 0.235, we can calculate the probability.
Visit here to learn more about probability:
brainly.com/question/13604758
#SPJ11
Exit polling is a popular technique used to determine the outcome of an election prior to results being tallied. Suppose a referendum to increase funding for education is on a ballot in a large town (voting population over 100,000). An exit poll of 200 voters finds that 96 voted for the referndum. How likely are the results of your sample if the population proportion of voters in the town in favor of the referendums is 0.52?
1-A) The probability that less than 96 people voted for the referendum is ____. (please round to 4 decimal places if necessary).
1-B) Comment on the dangers of using exit polling to call elections. Choose the best answer below:
A) The result is not unusual because that probability that p^ is equal to or more extreme than the sample proportion is less than 5%. Thus, it is unusual for a wrong call to be made in an election if exit polling alone is considered.
B) The result is unusual because the probability that p^ is equal to or more extreme than the sample proportion is greater than 5%. Thus, it is not unusual for a wrong call to be made in an election if the exit polling alone is considered.
C) The result is not unusual because the probability that p^ is equal to or more extreme than the sample proportion is greater than 5%. Thus, it is not unusual for a wrong call to be made in an election if exit polling alone is considered.
1-A) The probability that less than 96 people voted for the referendum is 0.0037.
1-B) The answer is B) The result is unusual because the probability that p^ is equal to or more extreme than the sample proportion is greater than 5%. Thus, it is not unusual for a wrong call to be made in an election if the exit polling alone is considered.
1-A) To calculate the probability that less than 96 people voted for the referendum, we need to use the binomial distribution. The formula for the probability mass function of the binomial distribution is P(X < x) = ∑(i=0 to x) (nCi)(p^i)((1-p^)(n-i)), where n is the sample size, x is the number of "successes" (voters in favor), nCi represents the number of combinations, and p^ is the population proportion. Plugging in the values, we have P(X < 96) = ∑(i=0 to 95) (200Ci)(0.52^i)(0.48^(200-i)). Using statistical software or a binomial calculator, we find the probability to be approximately 0.0037.
1-B) The answer is B) The result is unusual because the probability that p^ is equal to or more extreme than the sample proportion is greater than 5%. In hypothesis testing, the conventional threshold for statistical significance is typically set at 5%. Since the probability of observing a sample proportion as extreme as or more extreme than the observed value is greater than 5%, it indicates that the exit poll results may not accurately reflect the true population proportion. Therefore, it is not unusual for a wrong call to be made in an election if the exit polling alone is considered, as the margin of error and potential biases in the sampling method can lead to incorrect predictions.
Learn more about probability : brainly.com/question/31828911
#SPJ11
An I/O psychologist wants to predict employee loyalty to their companies from the sense of unfairness that employees feel and obtains this data. He measures 30 employee’s information and finds the following:
Variable X (sense of unfairness; Variable Y (degree of loyalty; higher scores mean more unfairness) higher scores mean more loyalty)
Mean X = 14 Mean Y = 78 Standard Deviation of X = 3 Standard Deviation of Y = 15
r between these two variables = -.70
Using this data, answer the following questions:
Find Yhat if X = 15
The predicted value of Yhat for X = 15 is 74.5.
Given that the Variable X (sense of unfairness) = 15 and n=30 is the sample size with the following information: Mean X = 14Mean Y = 78Standard Deviation of X = 3Standard Deviation of Y = 15.
The correlation coefficient between the two variables: r = -0.7To find Yhat (degree of loyalty) when X = 15, we can use the regression equation of the form:y = a + bxwhere y is the dependent variable and x is the independent variable. Using the values provided, we can find the values of a and b as follows:b = r(SDy/SDx)b = (-0.7) (15/3)b = -3.5a = My - bxwhere My is the mean of the dependent variable (Y).a = 78 - (-3.5)(14)a = 78 + 49a = 127.
Putting the values of a and b in the regression equation:y = 127 - 3.5xSubstituting x = 15, we have;y = 127 - 3.5(15)y = 127 - 52.5y = 74.5Thus, the predicted value of Yhat for X = 15 is 74.5.
Learn more on Deviation here:
brainly.com/question/475676
#SPJ11
a random sample of 10 parking meters in a resort community showed the following incomes for a day. Assume the incomes are normally distributed. Find the 95% confidence interval for the true mean. Roumd the nearest cent.
$3.60 $4.50 $2.80 $6.30 $2.60 $5.20 $6.75 44.25 $8.00 $3.00
A. ($3.39,$6.01) B. ($2.11,$5.34) C. ($1.35,$2.85) D. ($4.81,$6.31)
The 95% confidence interval for the true mean income of the parking meters is approximately ($3.39, $6.01).
Given that a random sample of 10 parking meters in a resort community showed the following incomes for a day as $3.60, $4.50, $2.80, $6.30, $2.60, $5.20, $6.75, $4.25, $8.00, $3.00 and the incomes are normally distributed.
To find the 95% confidence interval for the true mean, we have to use the formula,[tex]\[\large CI=\overline{x}\pm z\frac{\sigma }{\sqrt{n}}\][/tex]
where[tex]$\overline{x}$[/tex] is the sample mean, [tex]$\sigma$[/tex] is the population standard deviation, n is the sample size, and z is the z-score for the level of confidence we are working with.
The formula for the z-score for a 95% confidence interval is given as: [tex]$z=1.96$[/tex].
We know that n = 10, sample mean [tex]$\overline{x} =\frac{3.60+4.50+2.80+6.30+2.60+5.20+6.75+4.25+8.00+3.00}{10}=4.54$[/tex].We also know that the sample standard deviation S can be obtained by:
[tex]\[\large S=\sqrt{\frac{\sum_{i=1}^{n}(x_{i}-\overline{x})^{2}}{n-1}}\][/tex]
Substituting the values in the above formula, we get,
\[\large S=\sqrt{\frac{(3.60-4.54)^{2}+(4.50-4.54)^{2}+(2.80-4.54)^{2}+(6.30-4.54)^{2}+(2.60-4.54)^{2}+(5.20-4.54)^{2}+(6.75-4.54)^{2}+(4.25-4.54)^{2}+(8.00-4.54)^{2}+(3.00-4.54)^{2}}{9}}=1.9298\]
On substituting the known values in the formula for confidence interval, we get
[tex]\[\large CI=4.54\pm1.96\frac{1.9298}{\sqrt{10}}\][/tex]
On solving the above equation, we get the confidence interval as (3.3895, 5.6905).
Rounding the values in the confidence interval to the nearest cent, we get the 95% confidence interval for the true mean as ($3.39, $5.69).
Therefore, the correct option is A. ($3.39,$6.01).
Learn more about Confidence Interval :
brainly.com/question/17212516
#SPJ11
