Trangle ABC is the image of ABC under a reflection Given A(-2, 5), 80, 9), C3, 7) and A5, -2), B9, 0), and C17. 3), what is the line of reflection?
A x-axs
B y-as
C. y=x
D y=-x

PLEASE HELP!!!

Answers

Answer 1

The line of reflection is given as follows:

C. y = x.

How to obtain the line of reflection?

The coordinates of the original triangle are given as follows:

(-2,5), (0,9) and (3,7).

The coordinates of the reflected triangle are given as follows:

(5,-2), (9,0), (7,3).

We can see that the x-coordinates and the y-coordinates of the vertices were exchanged, hence the reflection rule is given as follows:

(x,y) -> (y,x).

Which represents a reflection over the line y = x, hence the correct option is given by option C.

More can be learned about reflection over y = x at https://brainly.com/question/26642069

#SPJ1


Related Questions

HELP ME I WILL GIVE BRAIN LEST


How many cows are there if 5 are in the barn and 8384737 are out the barn.

Answers

Answer:

8384742

Step-by-step explanation:

Answer:

there is no cow there because they have been barn

What is the surface area of the pyramid

(A) 38 cm2
(B) 76 cm2
(C) 100 cm2
(D) 152 cm2​​

Answers

Answer:

2(1/2)(4)(5.5) + 2(1/2)(5)(6) + 4(6) =

22 + 30 + 24 = 76 square centimeters

B is correct.

Point A is translated 5 units right and 2 down. Find A'.

Answers

Answer:

(3,1)

Step-by-step explanation:

Find the next four terms in the arithmetic sequence 1/4, 3/4, 5/4

Answers

Answer:

7/4, 9/4, 11/4, 13/4

Step-by-step explanation:

+ In an arithmetic sequence, to find the pattern you must subtract a term from the term after it to find the common difference.

3/4 subtracted from 5/4 is 2/4

1/4 subtracted from 3/4 is 2/4

+ So the common difference is 2/4 (Aka 1/2, but you want to keep the same denominator)

+ Therefore, between each new term, you add 2/4

1/4, 3/4, 5/4, 7/4, 9/4, 11/4, 13/4... and so on

Solve for x to make A||B. A 4x + 41 B 6x + 19 x = [ ? ]

Answers

Using the Alternate angles theorem, the value of x in the given diagram is 11

Alternate interior angles theorem: Calculating the value of x

From the question, we are to calculate the value of x that will make A || B

From the Alternate angles theorem which states that when two parallel lines are cut by a transversal, then the resulting alternate interior angles or alternate exterior angles are congruent.

In the given diagram,

The angle measures (4x + 41) and (6x + 19) are alternate interior angle measures

Thus.

For A to be parallel to B (A || B)

4x + 41 = 6x + 19

Solve for x

4x + 41 = 6x + 19

41 - 19 = 6x - 4x

22 = 2x

Divide both sides by 2

22 / 2 = x

11 = x

x = 11

Hence,

The value of x is 11

Learn more on Alternate interior angles theorem here: https://brainly.com/question/24839702

#SPJ1

Which of the following is the distance between the two points shown?

A graph with the x-axis starting at negative 4, with tick marks every one-half unit up to 4. The y-axis starts at negative 4, with tick marks every one-half unit up to 4. A point is plotted at negative 2.5, 0 and at 1.5, 0.

−4 units
−1.5 units
1.5 units
4 units

Answers

The distance between the two points (-2.5, 0) and (1.5, 0) is the absolute value of the difference between their x-coordinates, which is:

|1.5 - (-2.5)| = 4

Therefore, the distance between the two points is 4 units.

asap please
Triangle DEF has vertices at D(−3, 5), E(−10, 4), and F(−2, 2). Triangle D′E′F′ is the image of triangle DEF after a reflection. Determine the line of reflection if F′ is located at (2, 2).

x = 2
y = 1
y-axis
x-axis

Answers

Answer:

Step-by-step explanation:To determine the line of reflection, we need to find the equation of the line that is equidistant from each vertex of the original triangle and the corresponding vertex of the reflected triangle.

First, let's find the coordinates of the image of each vertex under the reflection. Since F' is given as (2, 2), we can reflect F across the unknown line of reflection to find the image of D and E. The line of reflection must be equidistant from each of these pairs of corresponding points.

To reflect F across a vertical line, the x-coordinate of F' must be the same as that of F but with the opposite sign. The x-coordinate of F is -2, so the x-coordinate of its image F' must be 2. Similarly, the y-coordinate of F' is 2, which means that the line of reflection must pass through the point (2, 2).

To reflect D across the same line, we can draw a perpendicular bisector between D and its image D', which must intersect the line of reflection at a right angle. The midpoint of DD' lies on the line of reflection, and it is equidistant from D and D'. Using the midpoint formula, we find the midpoint of DD' to be ((-3+2)/2, (5+2)/2) = (-0.5, 3.5). Since this point lies on the line of reflection, we can use the point-slope form of a line to find the equation of the line passing through (2, 2) and (-0.5, 3.5):

(y - 2) = m(x - 2) (where m is the slope of the line of reflection)

Simplifying:

y - 2 = m(x - 2)

y = mx - 2m + 2

To find the value of m, we can use the fact that the midpoint of DE lies on the line of reflection as well. The midpoint of DE is ((-3-10)/2, (5+4)/2) = (-6.5, 4.5). Substituting these values into the equation of the line, we get:

4.5 = m(-6.5) - 2m + 2

2.5 = -8.5m

m = -0.294

Therefore, the equation of the line of reflection is:

y = -0.294x + 2.588

This line is not the x-axis, y-axis or the line y=x. Therefore, the line of reflection is neither the x-axis nor the y-axis, and it is not the line y = x.

Answer:

X-axis

Step-by-step explanation:

I am in the middle of taking the quiz and this is the answer I think would be correct!

Given the expression: 10x2 + 28x − 6

Part A: What is the greatest common factor? Explain how to find it. (3 points)

Part B: Factor the expression completely. Show all necessary steps. (5 points)

Part C: Check your factoring from Part B by multiplying. Show all necessary steps. (2 points)

Answers

The greatest common factor of the given expression is 2.

The expression can be factored as (5x - 1)(x + 3).

Part A :

Given expression is 10x² + 28x - 6.

Greatest common factor of the expression is the greatest of all the common factors.

It is 2.

Therefore, the greatest common factor is 2.

Part B :

10x² + 28x - 6

5x² + 14x - 3

This can be factored as,

(5x - 1)(x + 3)

Part C :

(5x - 1)(x + 3) = (5x)(x) - (x) + (3)(5x) - 3

                    = 5x² + 14x - 3

Hence the GCF is 2.

Learn more about Greatest Common Factors here :

https://brainly.com/question/11221202

#SPJ1

describe a statistical advantage of using the stratified random sample over a simple random sample in the context of thgis study

Answers

The use of a stratified random sample over a simple random sample provides a statistical advantage in ensuring that the sample accurately represents the population. Stratified random sampling involves dividing the population into subgroups or strata based on certain characteristics, such as age or income.

This allows for a more representative sample as it ensures that each stratum is represented proportionally in the sample. In contrast, a simple random sample does not take into account any characteristics or strata of the population, which may result in an unrepresentative sample. Therefore, the use of a stratified random sample provides a statistical advantage by reducing the potential for sampling bias and increasing the accuracy of the study's results.
In the context of your study, a statistical advantage of using a stratified random sample over a simple random sample is that it ensures greater representation and accuracy in the results.

In a stratified random sample, the population is first divided into distinct subgroups or strata based on specific characteristics, such as age, gender, or income. Then, a simple random sample is taken from each stratum. This method helps to better represent each subgroup in the sample, which in turn improves the overall accuracy of the results.

On the other hand, a simple random sample involves selecting individuals from the entire population without considering any specific characteristics. This approach may not adequately represent certain subgroups, leading to potential biases and less accurate results. In summary, stratified random sampling provides a statistical advantage over simple random sampling by ensuring a better representation of subgroups, leading to more accurate and reliable results.

Learn more about random sample here:- brainly.com/question/31523301.

#SPJ11

COM Question 7 of 8, Step 1 of 5 Consider the following data: 5 6 8 9 VO P(X = x) 0.2 0.2 0.2 0.2 0.2 Step 1 of 5: Find the expected value E(X). Round your answer to one decimal place.

Answers

The expected value E(X) is 5.6.

To find the expected value E(X) of the given data, we'll use the terms you provided: data points (5, 6, 8, 9), probabilities (0.2, 0.2, 0.2, 0.2), and the formula E(X) = Σ [x * P(X = x)].

Step 1: List the data points and their corresponding probabilities:
X: 5, 6, 8, 9
P(X = x): 0.2, 0.2, 0.2, 0.2

Step 2: Use the formula E(X) = Σ [x * P(X = x)] and plug in the values:
E(X) = (5 * 0.2) + (6 * 0.2) + (8 * 0.2) + (9 * 0.2)

Step 3: Calculate each term:
E(X) = 1 + 1.2 + 1.6 + 1.8

Step 4: Sum up the terms:
E(X) = 5.6

Step 5: Round your answer to one decimal place:
E(X) = 5.6

So, the expected value E(X) of the given data is 5.6.

Know more about expected value here:

https://brainly.com/question/24305645

#SPJ11

Other than one what are the perfect square factors of 792

Answers

So the perfect square factors of 792 are 4, 9, 36, 144, 484, and 1089.

The prime factorization of 792 by dividing it by its smallest prime factor repeatedly:

792 ÷ 2 = 396

396 ÷ 2 = 198

198 ÷ 2 = 99

99 ÷ 3 = 33

33 ÷ 3 = 11

So the prime factorization of 792 is [tex]2^3 * 3^2 * 11.[/tex]

To find the perfect square factors, we can look for pairs of factors where both factors have even exponents.

The factors of 792 are: 1, 2, 3, 4, 6, 8, 11, 12, 18, 22, 24, 33, 36, 44, 66, 72, 88, 132, 198, 264, 396, and 792.

The perfect square factors of 792 are:

[tex]2^2 = 4\\2^2 * 3^2 = 36\\2^2 * 11^2 = 484\\3^2 = 93^2 * 4^2 = 144\\3^2 * 11^2 = 1089[/tex]

Learn more about perfect square visit: brainly.com/question/27307830

#SPJ4

slope = -1 y intercept = 8

Answers

Post the pic of the question and the answer choices.
We need to see the picture

A 12-foot pole is supporting a tent and has a rope attached to the top

Answers

The expression that represent the length of the rope is 10 / cos 40° =  13.1 feet

How to find the expression that show the length of the rope?

A 12-foot pole is supporting a tent and has a rope attached to the top. The rope is pulled straight and the other end is attached to a peg two foot above the ground.

This situation forms a right angle triangle. Therefore, let's find the expression that shows the length of the rope using trigonometric ratios.

Hence,

cos 40 = adjacent / hypotenuse

adjacent side = 10 ft

Therefore,

cos 40° = 10 / x

where

x = length of the rope

cross multiply

x = 10 / cos 40°

x = 10 / 0.76604444311

x = 13.0548302872

x = 13.1 feet

learn more on right triangle here: https://brainly.com/question/28281614

#SPJ1

Solve for x using the values present in the triangle

Answers

The value of x is 88.22 units.

Given is right triangle, we need to find the value of x,

tan 60° = 85 / a

a = 85 / √3

a = 49

Now,

tan 30° = 85 / a + x

a+x = 85 ÷ 1/√3

a+x = 147.22

x = 147.2-49

x = 88.22

Hence, the value of x is 88.22 units.

Learn more about tangent of an angle, click;

https://brainly.com/question/10053881

#SPJ1

Find a parametrization of the surface with equation (y2 + 1)e^z – (z^2 + 1)e^x + y^2z^2e^y = 0.

Answers

The surface with equation (y^2 + 1)e^z – (z^2 + 1)e^x + y^2z^2e^y = 0 can be parametrized as follows 1:

x = u

y = v

z = ln((v^2 + 1) / (u^2 + 1))

Parametrization of a surface is a mathematical technique used to describe a surface in terms of parameters. It involves expressing the coordinates of points on the surface as functions of two or more parameters. A common way to parametrize a surface is to use two parameters u and v to represent the coordinates of points on the surface. This is called a parametric representation or a parametric equation of the surface. Another way to parametrize a surface is to use a vector-valued function, which maps a point in a domain onto a point on the surface. Both of these techniques allow us to describe the surface in a way that is useful for mathematical analysis and visualization.

#SPJ11

Learn more about parametric representation of the surface:  https://brainly.com/question/24189086.

Please help ASAPPPPP i need aswer nowwww

Answers

Answer:

$270.00

Step-by-step explanation:

Simple Interest, describes interest that only applies to the principle balance (aka first balance). In the graph, that is represented by the green line.

The capital structure for the Carion Corporation is provided here. The company plans to maintain its debt structure in the future. If the firm has a 5.5 percent of debt, a 13.5 percent cost of preferred stock and an 18 percent cost of common stock, what is the firm's weighted average cost of capital?
CAPITAL STRUCTURE in thousand$
Bonds.............................$1,083
Preferred Stock................$268
Common Stock................$3,681
Total...............................$5032

Answers

The firm's weighted average cost of capital is 15.074%

To calculate the weighted average cost of capital (WACC), we need to follow these steps:

1. Determine the weight of each component of the capital structure (debt, preferred stock, and common stock) by dividing the value of each component by the total capital.
2. Multiply the weight of each component by its respective cost.
3. Sum the weighted costs to obtain the WACC.

Here's the step-by-step calculation:

1. Calculate the weights:
Debt weight = $1,083 / $5,032 = 0.215
Preferred stock weight = $268 / $5,032 = 0.053
Common stock weight = $3,681 / $5,032 = 0.732

2. Calculate the weighted costs:
Weighted cost of debt = 0.215 x 5.5% = 0.011825
Weighted cost of preferred stock = 0.053 x 13.5% = 0.007155
Weighted cost of common stock = 0.732 x 18% = 0.13176

3. Sum the weighted costs to find the WACC:
WACC = 0.011825 + 0.007155 + 0.13176 = 0.15074 or 15.074%

Therefore, we can state that the firm's weighted average cost of capital is 15.074%.

To learn more about weighted average visit : https://brainly.com/question/18554478

#SPJ11

Can someone please help me
If the volume of the hemisphere of the lime below is 6 cm3, what is the volume of the whole lime?

Volume of lime = ___ cm3

Answers

The volume of the whole lime represented by a sphere is given by  12 cubic centimeters.

Volume of the lime in hemispherical shape is equal to

= 6 cubic centimeters

Let us consider 'r' be the radius of the sphere.

Volume of hemisphere = ( 2/3 ) πr³

Volume of a sphere = ( 4 /3) πr³

Relation between volume of hemisphere and volume of a whole lime sphere

Volume of a whole lime sphere = 2 times of volume of hemisphere

⇒Volume of a whole lime sphere =  2 × 6

⇒Volume of a whole lime sphere =  12 cubic centimeters.

Therefore, the volume of the whole lime is equal to  12 cubic centimeters.

learn more about volume of hemisphere here

brainly.com/question/15514243

#SPJ1

substitution algebra

Answers

Answer:

The method of substitution involves three steps:

Solve one equation for one of the variables.

Substitute (plug-in) this expression into the other equation and solve.

Resubstitute the value into the original equation to find the corresponding variable.

Step-by-step explanation:

A pizza shop manager randomly inspects pizzas each day prior to their delivery to make sure they have been prepared properly. The manager uses a 10-item checklist for each inspected pia. One day, the manager inspected 74 pizzas. During the inspection, 3 pizzas were found to have a total of 8 non-conformances. What was the process throughout yield? Round and report your answer to four (4) decimal places

Answers

The process throughput yield rounded and reported to four (4) decimal places  is 98.9189%.

To find the process throughput yield, follow these steps:
1. Determine the total number of opportunities for non-conformance: The manager uses a 10-item checklist and inspected 74 pizzas. Therefore, the total number of opportunities for non-conformance is 10 items * 74 pizzas = 740 opportunities.

2. Calculate the number of non-conforming opportunities: During the inspection, 3 pizzas were found to have a total of 8 non-conformances.

3. Calculate the number of conforming opportunities: Subtract the number of non-conforming opportunities from the total opportunities: 740 opportunities - 8 non-conformances = 732 conforming opportunities.

4. Calculate the process throughput yield: Divide the number of conforming opportunities by the total opportunities and multiply by 100 to get the percentage: (732 conforming opportunities / 740 opportunities) * 100 = 98.9189%.

The process throughput yield for the pizza shop manager inspecting 74 pizzas, with 3 pizzas having a total of 8 non-conformances, is approximately 98.9189%. When rounded and reported to four (4) decimal places, the answer is 98.9189%.

Learn more about : Yield -https://brainly.com/question/20884766

#SPJ11

PLEASEE HELP MEEEEEE

Answers

The total surface area of the square pyramid is 585 in²

How to solve an equation?

An equation is an expression that can be used to show the relationship between two or more numbers and variables using mathematical operators.

The area of a figure is the amount of space it occupies in its two dimensional state.

To get the surface area:

Area of base = 15 in * 15 in = 225 in²

Area of one triangle lateral face = (1/2) * 15 in * 12 in = 90 in²

Area of four triangle lateral face = 4 * 90 in² = 360 in²

Total surface area = 225 in² + 360 in² = 585 in²

The total surface area is 585 in²

Find out more on equation at: https://brainly.com/question/2972832

#SPJ1

Which is 0. 54 converted to a simplified fraction?

Answers

For a decimal number 0.54, the converted fraction from this decimal number is written as [tex]\frac{ 54}{100} [/tex]. After simplification, the required fraction is equals to the [tex]\frac{ 27}{50} [/tex].

A fraction is defined as a part of whole. It is expressed as a quotient, where the numerator is divided by the denominator. To convert a decimal to a fraction, first we place the decimal number over its place value. For example, in 0.4, the 4 is in the tenths place, so we place 4over 10 to create the equivalent fraction, 4/10. We can simplify this fraction. To write the decimal fraction in fraction form of the digits to the right of the decimal period (numerator) and a power of 10 (denominator).

We have a decimal number, 0.54. We convert it in a simplified fraction form. As we see decimal is placed on hundredth place. So, the required fraction is 54 over 100 or we can write [tex]\frac{ 54}{100} [/tex]. Simplify this fraction, dividing the denominator and numentor by 2 then, [tex]\frac{27}{50} [/tex]. Hence, required value is [tex]\frac{27}{50} [/tex].

For more information about fraction, visit:

https://brainly.com/question/78672

#SPJ4

10-5+7-2-9+2-5+12-3+7-3+9-10-6+8-2+60-20 if u solve this u will get the same amount of points

Answers

Answer: 50

Step-by-step explanation:

Answer:

50?

Step-by-step explanation:

10-5 equals 5

5+7 equals 12

12-2 equals 10

10-9 equals 1

1+2 equals 3

3-5 equals -2

-2+12 equals 10

10-3 equals 7

7+7 equals 14

14-3 equals 11

11+9 equals 20

20-10 equals 10

10-6 equals 4

4+8 equals 12

12-2 equals 10

10+60 equals 70

70-20 equals 50

Simplify the expression: 4x(2y)+3y(2-x)

Answers

Answer:

5xy + 6y

Step-by-step explanation:

4x(2y) + 3y(2-x)

= 8xy + 6y - 3xy

= 5xy + 6y

So, the answer is 5xy + 6y

The simplified expression is:5xy + 6y

Expanding the expression gives:

4x(2y) + 3y(2 - x) = 8xy + 6y - 3xy

Combining like terms, we get:

8xy - 3xy + 6y = 5xy + 6y

Therefore, the simplified expression is:

5xy + 6y

To know more about expression visit:

brainly.com/question/14083225

Pleas help me I will give 50

Answers

Answer:

Stem | Leaf

1| 9

2| 5 9

3| 0 3 3 8

4| 0 7 9

5| 4 5

6| 1 5

7| 2 7

8| 1

Step-by-step explanation:

Minimum: 19

Maximum: 81

Range: 62

Count: 17

Sum: 808

Mean: 47.53

Median: 47

Mode: 33

Standard Deviation: 18.9

Variance: 357.3

Which expressions are equivalent to 1/3 - 2/5

Answers

Answer:

1/3+(-2/5) and 1/3+2/5

Step-by-step explanation:

help! look at the picture pls math.

Answers

Check the picture below.

so if we just get the volume of the whole box, and the volume of the balls, if we subtract the volume of the balls from that of the whole box, what's leftover is the part we didn't subtract, namely the empty space.

[tex]\stackrel{ \textit{\LARGE volumes} }{\stackrel{ whole~box }{(3.5)(3.5)(12.1)}~~ - ~~\stackrel{\textit{three balls} }{3\cdot \cfrac{4\pi (1.65)^3}{3}}} \\\\\\ 148.225~~ - ~~17.9685\pi ~~ \approx ~~ \text{\LARGE 91.8}~cm^3[/tex]

you are dealt one card from a standard 52-card deck. find the probability of being dealt an ace or a 8. group of answer choices

Answers

There are 4 aces and 4 nights in a standard 52-card deck. So, the total number of cards that can be considered as a successful outcome is 8. Therefore, the probability of being dealt an ace or an 8 is 8/52 or 2/13. To find the probability of being dealt an Ace or an 8, follow these steps:

1. Identify the total number of cards in the deck: There are 52 cards in a standard deck.

2. Determine the number of Aces and 8s in the deck: There are 4 Aces and 4 eights, totaling 8 cards (4 Aces + 4 eights).

3. Calculate the probability: Divide the number of desired outcomes (Aces and 8s) by the total number of cards in the deck.

Probability = (Number of Aces and 8s) / (Total number of cards)
Probability = 8 / 52

4. Simplify the fraction: 8/52 can be simplified to 2/13.

So, the probability of being dealt an Ace or an 8 from a standard 52-card deck is 2/13.

Learn more about probability here:- brainly.com/question/30034780.

#SPJ11

M is the midpoint of PQ. the diameter of circle O is 13 in. and RM = 4 in. Find PM

Answers

The PM of the circle is 6 in.

How to find the PM of the circle?

Since the diameter of the circle divide the circle into two equal parts. We can say:

PM = MQ

Applying the Intersecting Chord Theorem (When two chords intersect each other inside a circle, the products of their segments are equal). That is:

SM * RM = PM * MQ

SM * RM = PM²

SM = 13 - 4

SM = 9 in

RM = 4 in

Substituting:

SM * RM = PM²

9 * 4 = PM²

PM² = 36

PM = √36

PM = 6 in

Learn more about circle on:

https://brainly.com/question/31533348

#SPJ1

9. Look at the graph below. If the object is rotated 180° about the z-axis, the coordinates for
Point A (-1, 2, 2) will be
1

Answers

The image of the point after it is rotated 180° about the z-axis is A' = (1, -2, -2)

Calculating the image of the point after the rotation

From the question, we have the following parameters that can be used in our computation:

Point A = (-1, 2, 2)

The rule of rotation is given as rotated 180° about the z-axis

Mathematically, this rule can be expressed as

(x, y, z) = (-x, -y, -z)

Substitute the known values in the above equation, so, we have the following representation

A' = (1, -2, -2)

Hence. the image of the point after the rotation is A' = (1, -2, -2)

Read more aboutt transformation at

https://brainly.com/question/4289712

#SPJ1

Other Questions
in pages 139-154 of seven fallen feathers by tanya talaga Make a list of key quotations/passages in the reading (5 key passages) and explain why these are important State ratification convention delegates from South Carolina had the following serious concerns about the Constitution EXCEPT why was constantinople chosen for the capital city of Ottoman Empire and how did it effect the Muslim world? Which additional observation, if true, would best support the RNA world hypothesis? A. The base uracil in RNA has less frequent mutations than the base thymine in DNA. B. RNA is less stable than DNA and has less precise mechanisms for repairing itself. C. RNA is less likely to have errors in replication than DNA because it can self-replicate. D. The ribose sugar in RNA is less likely to degrade than the deoxyribose sugar in DNA. The Product Owner is using split testing to measure the end users' satisfaction, to judge the success of the project and use the information for the remaining Sprints. Is it a right way of product ownership in Scrum? Which set of ordered pairs gives the polygon shown?(-4.2), (-4, -5), (1.5, -5), (1.5, 2)(1.5, 2), (1.5, -4.5), (-4.5, -4), (2, -4)(-4, -4.5), (-4.5, 1.5), (1.5, 2), (-4, 2)(1.5, -4.5), (-4, -4.5), (-4, 2), (1.5, 2) Our attitudes toward perfumes and colognes tend to be ___________________ based. a) Cognitively b) Affectively c) Behaviourally d) Dissonance You have just applied an air splint to a patient's injured forearm. When inflating the splint, you should: If each interior angle of a regular polygon measures 150, how many sides does the polygon have? QUICK ILL MARK YOU BRAINLIEST!! Help me solve this problem! When multiple Scrum teams are working on the same product, should their Sprint length be the same? Marinos Limited manufactures a product which passes through several processes of production. In respect of Process 1, at the start of the October there are 4,000 units in opening work-in-progress, with an associated materials cost of 12,000 and conversion cost of 2,100. During October 16,000 units are started. During October, materials costs of 26,000 are incurred, along with conversion costs of 7,500. At the end of October there are 2,000 units of closing work-in-progress which are deemed to be 60% complete. Materials are added half way through Process 1. The cost of materials in work-in-progress at the end of October will be: A company manufactures high-quality china plates, which are hand-painted. It has a budgeted overhead of 20,000, taking 150 machine hours and 800 direct labour hours. Each plate uses 3 of direct materials, 0.25 labour hours at 10 per hour and 0.2 machine hours. What is the cost of a plate? True or false: Responsible leaders encourage auditors to exercise professional skepticism Why does Torvald leave his home country? 150mg/dL or 0.15g/dL BAC is equal to how many drinks? Which skin area--the forearm or palm of hand---has more sweat glands? 58. A study of employees revealed that there were a number of areas of concern in regards to career planning, including all of the following except:A. career equity.B. supervisory concern.C. awareness of opportunities.D. career satisfaction.E. job design. What was Hitler's Final Solution to the Jewish problem? A. creating a Jewish master race B. isolating Jews from other Europeans by placing them in ghettos C. exterminating all European Jews D. deporting Jews to the United States Colton is flying a kite, holding his hands a distance of 3 feet above the ground and letting all the kites string play out. He measures the angle of elevation from his hand to the kite to be 32 degrees If the string from the kite to his hand is 90 feet long, how many feet is the kite above the ground? Round your answer to the nearest hundredth of a foot if necessary. Identify the type I error and the type II error that corresponds to the given hypothesis.The proportion of people who write with their left hand is equal to 0.24.Which of the following is a type I error? Which is type II error?A. Fail to reject the claim that the proportion of people who write with their left hand is 0.24 when the proportion is actually 0.24B. Reject the claim that the proportion of people who write with their left hand is 0.24 when the proportion is actually different from 0.24.C. Reject the claim that the proportion of people who write with their left hand is 0.24 when the proportion is actually 0.24.D. Fail to reject the claim that the proportion of people who write with their left hand is 0.24 when the proportion is actually different from 0.24.