Transcribed image text: A pipet is used to measure out 10 mL of water. If the mass of this volume of water is 9.990 g and the density of water is given as 0.9978 g/mL, what is the actual volume of water measured out? O 10.000 mL 9.990 mL O The actual volume measured out is impossible to tell 10.012 mL

The correct option is d.)1s3  Explanation s- orbital can hold a maximum of 2 electrons.

1s3- There is only one s orbital per energy level, and each orbital can hold a maximum of two electrons, so there can not be 3s electrons at any energy level. The Aufbau principle dictates the manner in which electrons are filled in the atomic orbitals of an atom in its ground state.

It states that electrons are filled into atomic orbitals in the increasing order of orbital energy level. According to the Aufbau principle, the available atomic orbitals with the lowest energy levels are occupied before those with higher energy levels.

To know more about Aufbau principle please refer:

https://brainly.com/question/13393709

#SPJ4

Properties  of  Iron Rusting is Chemical;Gasoline Burning is Chemical;Solid Sulfur is Physical ;Shattering is Physical ;Lye Feeling Slippery is Physical.

Iron Rusting: Chemical - Iron rusting is a chemical reaction between iron, oxygen and water which results in the formation of hydrated iron oxide (Fe2O3).

Gasoline Burning: Chemical - Gasoline burning is a combustion reaction between gasoline and oxygen which results in the formation of carbon dioxide (CO2) and water (H2O).

Solid Sulfur: Physical - Solid sulfur is a physical property because it is a solid at room temperature and pressure.

Shattering: Physical - Shattering is a physical properties because it is a change in the physical structure of an object.

Lye Feeling Slippery: Physical - Lye feeling slippery is a physical property because it is a tactile sensation caused by the physical properties of lye.

learn more about  physical properties Refer:brainly.com/question/13562531

Complete question:Each of the following properties as being physical as being physical or chemical

iron rusting; gasoline burning ;solid sulfur ;shaltering and lye feeling slippery

The equilibrium constant, represented as Kc or Keq, is a value that expresses the extent of a chemical reaction at equilibrium

The characteristics of the equilibrium constant include:

It is a constant value: The equilibrium constant has a fixed value at a given temperature and pressure for a particular chemical reaction. It is independent of the initial concentrations (or partial pressures) of the reactants and products, and it does not change with time once equilibrium has been reached. It is related to the degree of completion of a reaction: The magnitude of the equilibrium constant indicates the degree to which a reaction has proceeded towards completion. It is affected by temperature: The equilibrium constant is dependent on temperature.  It depends on the stoichiometry of the reaction: The equilibrium constant is calculated based on the stoichiometry of the balanced chemical equation for the reaction. It can be used to predict the direction of the reaction: The value of the equilibrium constant can be used to predict the direction in which the reaction will proceed under certain conditions.

To learn more about equilibrium please visit- https://brainly.com/question/28527601
#SPJ4

The final pressure of the two tanks combined is  c)6.1atm.So,correct option is c.

Boyle's law, likewise alluded to as the Boyle-Mariotte law, or Mariotte's regulation (particularly in France), is an exploratory gas regulation that portrays the connection among tension and volume of a bound gas. Boyle's law has been expressed as: Numerically, Boyle's regulation can be expressed as: or where P is the pressure of the gas, V is the volume of the gas, and k is a consistent. Boyle's law expresses that when the temperature of a given mass of restricted gas is constant, the result of its pressure and volume is likewise inversely proportional to each other.

According to boyle's law total pressure of any tank will be pressure exerted by it on a total volume of container.

In other words,pressure exerted by each tank =pressure value  × (total volume of container)

Therefore,

From first tank, pressure is  =7.2 × [15L/(15+8.3)]

=>pressure of first tank is = 7.2 ×(15/23.3)

=>pressure of first tank is =7.2×0.64377=4.635atm

Now,pressure of second tank is =4.1 × [8.3 / (8.3+15) ]

=>pressure of second tank is =(4.1) × [8.3 / 23.3]

=>pressure of second tank is =4.1×0.356=1.46atm

Therefore,total pressure exerted by two tanks combines=1.46atm + 4.635atm=6.095atm=6.1atm.

Hence,option c is correct.

To know more about boyles' law,visit here:

https://brainly.com/question/1437490

#SPJ4

The chemical composition The empirical formulas for the other three molecular formulas are as follows: C5H12O has the same empirical formula, and OCH5O is COH, OC2H6O is CH3O, and C3H6O is CH2O.

The kind of chemical formula known as an empirical formula represents the simplest atom-to-atom relationship found in a chemical formula. The empirical formula and the molecular formula are generally related in the following way: (Molecular Formula = n Empirical Formula).

The simplest whole-number ratio of the atoms in a compound is shown by empirical formulae, the number of each type of atom in a molecule is shown by molecular formulas, The structural formulas illustrate the bonds that exist between the atoms of a molecule.

To know more about empirical formulas visit:-

https://brainly.com/question/14044066

#SPJ1

Answer:

see below

Explanation:

The molar mass of 34.26 g/mol is consistent with the molar mass of nitrogen gas (N2), which is 28.02 g/mol. Therefore, the unknown gas is likely nitrogen.

To identify the unknown gas, you need to determine its molar mass. The ideal gas law can be used to calculate the molar mass. The ideal gas law is given as:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in kelvin. To calculate the molar mass, we'll rearrange the ideal gas law to solve for n:

n = PV / RT

The gas constant R has a value of 0.0821 L-atm/mol-K. To convert the temperature to kelvin, add 273.15 to the temperature in °C. The pressure must be converted from torr to atm. One atm is equal to 760 torr, so:

P = 209 torr / 760 torr/atm

P = 0.2758 atm

The volume must also be converted from mL to L. 1 L = 1000 mL, so:

V = 732 mL / 1000 mL/L

V = 0.732 L

Now that we have all the required values, we can plug them into the ideal gas law equation to calculate the number of moles:

n = 0.2758 atm * 0.732 L / (0.0821 L-atm/mol-K * (21 + 273.15 K))

n = 0.0108 mol.

Since the mass of the gas is given as 0.37 g, we can calculate the molar mass as:

Molar mass = mass / moles

= 0.37 g / 0.0108 mol

= 34.26 g/mol

To learn more about Molar mass :

https://brainly.com/question/28836180

#SPJ4

Depending on the molecule's chemical composition, they can be purines or pyrimidines.

Nucleotide building blocks are the monomers (single molecules) that make up nucleic acids, such as deoxyribonucleic acid (DNA) and ribonucleic acid (RNA). They are classified as either purines or pyrimidines, depending on the chemical structure of the molecule.

Purines: Adenine (A), Guanine (G)

Pyrimidines: Cytosine (C), Thymine (T), Uracil (U)

Sorted by name: Adenine (A), Cytosine (C), Guanine (G), Thymine (T), Uracil (U)

Sorted by classification: Purines: Adenine (A), Guanine (G) Pyrimidines: Cytosine (C), Thymine (T), Uracil (U).A nucleotide is the basic structural unit of nucleic acids such as DNA and RNA.

learn more about Adenine Refer:brainly.com/question/907132

#SPJ4

complete question:sort these nucleotide building blocks by their name or classification. from below image

When ATP is broken down, it releases energy in the form of a phosphate bond, which can be used to power metabolic processes.

Metabolism is the set of life-sustaining chemical reactions that occur in living organisms. These biochemical processes allow organisms to grow and reproduce, maintain their structures, and respond to their environment. Metabolism of energy within cells is known as cellular metabolism. Metabolism can be divided into two categories, catabolism and anabolism. Catabolism is the breakdown of molecules to obtain energy. Anabolism is the building up of molecules to create other molecules and store energy. Metabolic reactions involve the energy that is used to power the cell and the molecules that are used as building blocks for biosynthesis.

To learn more about metabolic

https://brainly.com/question/1490181

#SPJ1

The correct answer is Carbon Dioxide is formed as a result of the sodium bicarbonate wash.

Each of the molecules of carbon dioxide, with the chemical formula CO2, has one carbon atom covalently doubly bonded to two oxygen atoms. It occurs in the gas state at room temperature. Carbon dioxide acts as a greenhouse gas in the atmosphere because it absorbs infrared light rays despite being transparent to visible light. From pre-industrial levels of 280 parts per million (ppm) to a trace gas of 421 ppm, or nearly 0.04% by volume, it has grown (as of May 2022). [9] [10] The combustion of fossil fuels is the primary cause of both these high CO2 concentrations and climate change. Dissolved carbon dioxide is present in the ocean, ice caps, lakes, and groundwater.

To learn more about Carbon Dioxide click the link below

brainly.com/question/11244194

#SPJ4

The amino acid that is most likely to participate in hydrogen bonding with water is asparagine (Asn).

Asparagine contains an amide functional group (-CONH-) in its side chain, which can act as a hydrogen bond donor and acceptor. This allows asparagine to interact with water molecules through hydrogen bonding, making it more hydrophilic (water-loving) than the other amino acids listed. Valine (Val), leucine (Leu), and phenylalanine (Phe) are hydrophobic (water-fearing) amino acids because their side chains do not contain functional groups that can participate in hydrogen bonding with water. Alanine (Ala) contains a methyl functional group (-CH3) in its side chain, which is also hydrophobic and does not participate in hydrogen bonding. Therefore, asparagine is the most likely amino acid to participate in hydrogen bonding with water.

Learn more about amino acids here:

https://brainly.com/question/14583479

#SPJ4

The grams of water are needed to dissolve 25.31 g of the potassium nitrate  in order to prepare the 0.1982 M solution is 1263 g.

The expression of the molality is as follows :

Molality = moles solute / kg solvent  

The kg of solvent = moles solute / molality  

The moles of solute = mass / molar mass  

The moles of solute = 25.31 g / 101.1 g/mole  

The moles of solute = 0.2503 mole

The amount in kg solvent = 0.2503 mole / 0.1982 m  

The amount in kg solvent = 1.263 kg  

The amount in kg solvent = 1263 g

To learn more molality here

https://brainly.com/question/11003135

#SPJ4

Covalent bonding is present in Quartz. Covalent bonds result in a high melting point. Covalent solids are insoluble in most solvents.

Quartz is very hard to melt because quartz is unsteady above 870 Celsius, and molten silica is wobbling below 1713 Celsius. In the interval between 870 and 1713 degrees, quartz tends to change to tridymite or cristobalite, not melt. It is hard to heat quartz to melt, in the region of 1650 Celsius

Melting point: The melting point of quartz is higher than 1700°C. Curie temperature for alpha and beta quartz: The Curie warmth for quartz is 573°C.

So we can conclude that Crystal quartz has a very particular melting point. Because quartz glass is a single component it doesn't form eutectics

Learn more about melting points here: https://brainly.com/question/40140

#SPJ1

Molar mass of MgF2 = 62.30 g/mol and freezing point = 0 °C - 0.764 °C = -0.764 °C

a) To calculate the freezing point depression of a solution, we can use the formula:

ΔTf = Kf x molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent (water) and molality is the concentration of the solute (FeCl3) in moles per kilogram of solvent (water).

The molality of the solution can be calculated as follows:

mass of FeCl3 = 10.6 g

molar mass of FeCl3 = 162.2 g/mol

moles of FeCl3 = mass / molar mass = 10.6 g / 162.2 g/mol = 0.0654 mol

mass of water = 159 g

molality = moles of solute / mass of solvent (in kg) = 0.0654 mol / 0.159 kg = 0.411 mol/kg

The freezing point depression constant for water is 1.86 °C/m. Thus, the change in freezing point can be calculated as follows:

ΔTf = Kf x molality = 1.86 °C/m x 0.411 mol/kg = 0.764 °C

The freezing point of pure water is 0 °C, so the freezing point of the solution is:

freezing point = 0 °C - 0.764 °C = -0.764 °C

b) To calculate the boiling point elevation of a solution, we can use the formula:

ΔTb = Kb x molality

where ΔTb is the change in boiling point, Kb is the boiling point elevation constant for the solvent (water) and molality is the concentration of the solute (KCl) in moles per kilogram of solvent (water).

The molality of the solution can be calculated as follows:

mass of KCl = 3.9 g

molar mass of KCl = 74.55 g/mol

moles of KCl = mass / molar mass = 3.9 g / 74.55 g/mol = 0.0523 mol

mass of water = 100 g (assuming the total mass of the solution is 103.9 g, with 3.9 g KCl and 100 g water)

molality = moles of solute / mass of solvent (in kg) = 0.0523 mol / 0.1 kg = 0.523 mol/kg

The boiling point elevation constant for water is 0.52 °C/m. Thus, the change in boiling point can be calculated as follows:

ΔTb = Kb x molality = 0.52 °C/m x 0.523 mol/kg = 0.272 °C

The boiling point of pure water is 100 °C, so the boiling point of the solution is:

boiling point = 100 °C + 0.272 °C = 100.272 °C

c) To calculate the freezing point depression of a solution, we can use the formula:

ΔTf = Kf x molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent (water) and molality is the concentration of the solute (MgF2) in moles per kilogram of solvent (water).

The molality of the solution can be calculated as follows:

molarity of MgF2 = 0.168 mol/L

molar mass of MgF2 = 62.30 g/mol

mass of MgF2 in 1 L of solution = molarity x volume x m

Find out more about  freezing point

brainly.com/question/30675499

#SPJ4

Answer:

Covalent bond

Explanation:

A covalent bond is a type of chemical bond where two or more atoms share electrons in order to form a bond between them. This bond results from the sharing of electrons in order to attain stability and full valence electron shells for each of the atoms involved. Covalent bonds are typically formed between non-metal elements and are known for their strength and stability.

Answer:

Covalent bond

Explanation:

A covalent bond is a type of chemical bond where two atoms share a pair of electrons in order to form a chemical bond. This bond is formed when the electron pair is shared equally between the two atoms, resulting in a stable and strong bond. Covalent bonds are typically found in compounds composed of non-metallic elements, such as oxygen, nitrogen, and carbon. These bonds are important in the formation of molecules and play a key role in biological processes.

Answer:

Coal, oil, and natural gas are all fossil fuels that were formed from the remains of plants and animals that lived millions of years ago.

Coal was formed from the remains of plants that grew in vast swamps and bogs during the Carboniferous period, about 300 million years ago. Over time, these plants were buried by sediment and subjected to heat and pressure, which transformed them into coal.

Oil and natural gas were formed from the remains of tiny marine organisms, such as plankton and algae, that lived in the oceans and seas hundreds of millions of years ago. When these organisms died, their remains sank to the bottom of the ocean and were buried by sediment. Over time, heat and pressure transformed the organic material into oil and natural gas.

In terms of reserve abundance, natural gas is currently in the greatest supply. According to the US Energy Information Administration (EIA), global natural gas reserves were estimated at 198 trillion cubic meters as of January 2022. This is followed by oil, with global reserves estimated at 1.73 trillion barrels, and coal, with global reserves estimated at 1.03 trillion short tons. However, it's important to note that the availability and distribution of these resources can vary widely by region, and factors such as extraction costs, market demand, and environmental regulations can all influence their commercial viability.

In the given sample, when the water level is rises from 23.8ml to 28.5 ml,  the density of the metal is 5.00 g/cm³

To find the density of the metal, we need to use the formula:

density = mass / volume

We are given the mass of the metal as 23.5 g. To find the volume of the metal, we need to subtract the initial volume of water in the cylinder from the final volume of water after the metal is added. The difference in volume is equal to the volume of the metal.

The initial volume of water is 23.8 ml, and the final volume of water is 28.5 ml, so the volume of the metal is:

volume = final volume - initial volume

volume = 28.5 ml - 23.8 ml

volume = 4.7 ml

Now we can substitute the values for mass and volume into the density formula:

density = mass / volume

density = 23.5 g / 4.7 ml

We need to convert the volume to cubic centimeters (cm³) because the units of density are expressed in g/cm³.

1 ml is equal to 1 cm³, so:

density = 23.5 g / 4.7 cm³

density = 5.00 g/cm³ (rounded to two decimal places).

Learn more about density here: brainly.com/question/26364788

#SPJ4

When 1-bromopropane is subjected to magnesium, 1-pentanol results, which is then followed by ethylene oxide and aqueous acid.

A Grignard reagent is created when 1-bromopropane reacts with magnesium to begin the process. Then, the ethylene oxide and the Grignard reagent combine to create an intermediary molecule. Aqueous acid is then used to transform this intermediate chemical into 1-pentanol.

To turn alkenes into alcohols, a technique known as the "Wacker oxidation" or "Wacker process" is utilized. It is significant to remember that Wacker oxidation is a multi-step procedure that calls for particular reagents and circumstances in order to be properly carried out. To produce the desired product, the reaction must be carried out in an inert environment at high temperatures.

To learn more about 1-bromopropane click here https://brainly.com/question/21286023

#SPJ4

compete question: when 1-bromopropane is exposed to magnesium, followed by ethylene oxide, and then aqueous acid, what is the resulting product? a.) 2-pentanol b.) 2-methyl-2-pentanol c.) 2-methyl-2-hexanol d.) 1-pentanol

The correct order for atomic radius for Mg, Na, P, Si, and Ar is:
D) Na > Mg > Si > P > Ar.

The atomic radius is the distance from the center of an atom to the outermost shell of electrons. Atomic radius generally increases as you move down a group and from right to left across a period in the periodic table.

Na and Mg are in the same period (row) of the periodic table, but Na has a larger atomic radius than Mg because Na has one more energy level than Mg. Si has a smaller atomic radius than Mg because Si is located to the right of Mg in the same period, and moving from left to right across a period, atomic radius generally decreases. P has a larger atomic radius than Si because P is located one row below Si, and moving down a group, atomic radius generally increases. Finally, Ar has the smallest atomic radius because it is a noble gas and its valence shell is completely filled with electrons, making it difficult to add more electrons.

Therefore, the correct order of atomic radius for these elements is Na > Mg > Si > P > Ar.

Learn more about atomic radius here:

https://brainly.com/question/20522928

#SPJ4

Answer: 0.83 mole

Explanation:

H2O has a gram-formula mass of 18 (hydrogen is 1 each, oxygen is 16).

If you have 15 grams, you have less than one mole.

15/18=0.83.

(っ◔◡◔)っ ♥

Hope this helps.

MM4343

Answer:

0.83 moles

Explanation:

The number of moles in 15 grams of water (H2O) can be calculated as follows:

First, we need to determine the molecular weight of H2O. It is composed of 2 hydrogen atoms (H) and 1 oxygen atom (O). The molecular weight of H2O can be calculated as follows:

(atomic weight of H x 2) + (atomic weight of O) = 2 x (1.01 g/mol) + 16.00 g/mol = 18.02 g/mol

Next, we can use the formula:

number of moles = mass / molecular weight

where mass is given as 15 grams.

number of moles = 15 g / 18.02 g/mol = 0.83 moles

Allen

The balanced equation for the reaction of zinc with hydrochloric acid is:

Zn (s) + 2 HCl (aq) -> ZnCl2 (aq) + H2 (g)

A balanced equation is a chemical equation in which the number of atoms of each element is equal on both sides of the equation. This means that the equation is in agreement with the law of conservation of matter, which states that matter cannot be created or destroyed, only transformed from one form to another.

Balancing an equation involves adjusting the coefficients in front of the chemical formulas so that the number of atoms of each element is the same on both sides of the equation.

Zn (s) + 2 HCl (aq) -> ZnCl2 (aq) + H2 (g)

In this reaction, zinc (Zn) reacts with hydrochloric acid (HCl) to form zinc chloride (ZnCl2) and hydrogen gas (H2).

To learn more about Balanced equation:

https://brainly.com/question/4328202

#SPJ4

The correct option is (b) We can't know for sure whether or not the mass changed, but it seems reasonable to claim that the mass did not change, given that the ranges of uncertainty overlap.

The overlap of the ranges of uncertainty for each measurement indicates that the masses of the solution before and after the reaction are consistent with each other. However, this does not provide definite proof that the mass did not change, as there is still some uncertainty associated with the measurements. The student's conclusion is reasonable, given the information provided, but further investigation is needed to determine if the mass did actually stay the same.

In scientific experiments, it is common to make multiple measurements of a quantity and report the results along with the associated uncertainty. The uncertainty represents the degree of precision with which the measurement was made, and it is typically expressed as a range of values. In this case, the student made two measurements of the mass of the solution with an uncertainty of 0.05 g, and the results were 50.25 g ± 0.05 g for both measurements.

Learn more about precision here:

https://brainly.com/question/27918367

#SPJ4

The amount of HCl reagent (36.0%, specific gravity - 1.18) required to prepare 1 litre of 0.1M HCl solution is [tex]0.3085 ml[/tex].

To prepare 1 litre of 0.1M HCl solution, we need to calculate the amount of HCl reagent (36.0%, Specific gravity - 1.18) required.

HCl has a molecular weight of 36.46 g/mol..

Now, the equation to calculate the amount of HCl required is:

Amount of HCl = [tex]\frac{ (Molarity of solution * Volume of solution * Molecular Weight of HCl) }{(Percentage purity of HCl * Specific Gravity of HCl)}[/tex]

So, the amount of HCl reagent required to prepare 1 litre of 0.1M HCl solution is:

Amount of HCl = [tex]\frac{(0.1 * 1 *36.46) }{(36.0 x 1.18)}= 0.3085 g[/tex]

Now, 1 g of HCl reagent = 1 ml of HCl reagent

Therefore, the amount of HCl reagent (36.0%, specific gravity - 1.18) required to prepare 1 litre of 0.1M HCl solution is[tex]0.3085 ml[/tex].

learn more about specific gravity Refer:brainly.com/question/28026962

#SPJ4

Answer:

The length of the spines that it produces is the trait that is entirely passed from one generation to the next.

Answer:

C. the length of the spines that it produces

The amount of the Br₂ in moles was formed during the first 15.0 s of the reaction is 0.0396 mol.

The rection is as :

2HBr  --->   H₂  +  Br₂

The rate of disappearance of HBr = - (1/2) d[HBr] / dt

The rate of formation of H₂  = + (1/ 2 )d [H₂ ] / dt

The rate of formation of  Br₂ = + (1/2) [  Br₂] / dt

Average rate = - (1/2) d[HBr] / dt

                       = - (1/2) ( 0.512 - 0.600 ) / (25 - 0 )

                       = 0.00176 M/s

d[ Br₂] / dt = 0.00176 M/s

[ Br₂]  = 0.0264 M

The moles of  Br₂ = 0.0264 × 1.25

                              = 0.0396 mol

This question is incomplete, the complete question is :

Consider the reaction. 2 HBr(g) ¡ H2(g) + Br2(g) a. Express the rate of the reaction in terms of the change in concentration of each of the reactants and products. b. In the first 25.0 s of this reaction, the concentration of HBr drops from 0.600 M to 0.512 M. Calculate the average rate of the reaction during this time interval.c. If the volume of the reaction vessel in part b is 1.50 L, what amount of Br2 (in moles) forms during the first 15.0 s of the reaction?

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

The heat of solution is made up of two measurable heats, the heat of hydration and the heat of lattice energy.

The heat of hydration is the amount of heat released when one mole of a substance is dissolved in water, and the heat of lattice energy is the amount of heat released when one mole of a solid ionic compound is formed from its gaseous ions.

Together, these two heats make up the heat of solution, which is the overall amount of heat released or absorbed during the dissolution of a substance in a solvent.

Learn more about dissolution in:

https://brainly.com/question/29828854

#SPJ11

mix 100.0 g of water at 21.4 oc with 75.0 g of water at 72.0 oc then final temperature of the mixed water is 34.9°C.

To find the final temperature of the mixed water, we can use the principle of heat transfer. The heat lost by the hot water is equal to the heat gained by the cold water. The formula for calculating heat transfer is: Q = mcΔT, where Q is the heat transfer, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
First, we can calculate the heat lost by the hot water using Q = mcΔT. The mass of the hot water is 75.0 g, the specific heat capacity of water is 4.184 J/g°C, and the initial temperature of the hot water is 72.0°C, while the final temperature is unknown. Therefore, the heat lost by the hot water is (75.0 g)(4.184 J/g°C)(72.0°C - x), where x is the final temperature of the mixed water.
Next, we can calculate the heat gained by the cold water using the same formula, but with the mass, specific heat capacity, and initial temperature of the cold water. The heat gained by the cold water is (100.0 g)(4.184 J/g°C)(x - 21.4°C).

Since the heat lost by the hot water is equal to the heat gained by the cold water, we can set these two expressions equal to each other and solve for x:
(75.0 g)(4.184 J/g°C)(72.0°C - x) = (100.0 g)(4.184 J/g°C)(x - 21.4°C)
Solving for x gives x = 34.9°C.

Therefore, the final temperature of the mixed water is 34.9°C.

Learn more about temperature here:

https://brainly.com/question/7510619

#SPJ4

Answer:

The EF of the compound is CH2O and the MF is C6H12O6.

Explanation:

To find the empirical formula (EF) of the compound, we need to determine the simplest whole number ratio of the atoms in the compound. We can assume we have 100 g of the compound, which means we have:

40 g of carbon

6.67 g of hydrogen

53.33 g of oxygen (since the rest of the compound is oxygen)

Next, we can convert the masses to moles:

Moles of carbon = 40 g / 12.01 g/mol = 3.33 mol

Moles of hydrogen = 6.67 g / 1.01 g/mol = 6.61 mol

Moles of oxygen = 53.33 g / 16.00 g/mol = 3.33 mol

We then divide each of the mole values by the smallest number of moles, which is 3.33, to get the simplest whole number ratio:

Carbon: 3.33 / 3.33 = 1

Hydrogen: 6.61 / 3.33 = 1.98 (rounded to 2)

Oxygen: 3.33 / 3.33 = 1

So the EF of the compound is CH2O.

To find the molecular formula (MF), we need to know the molecular mass of the EF. The empirical formula mass (EFM) of CH2O is:

EFM = (1 x 12.01 g/mol) + (2 x 1.01 g/mol) + (1 x 16.00 g/mol) = 30.03 g/mol

We can then calculate the molecular formula mass (MFM) by dividing the given molecular mass (180 g/mol) by the EFM:

MFM = 180 g/mol / 30.03 g/mol = 6

This means the MF is 6 times the EF, or C6H12O6. Therefore

False. As you go from left to right across the periodic table, the number of protons and electrons in the atoms increases, but the atomic radius decreases.

This is due to the increasing nuclear charge (number of protons in the nucleus) that attracts the electrons more strongly, pulling them closer to the nucleus and reducing the size of the atom. This effect is only partially offset by the addition of more electrons in higher energy levels, as these are further away from the nucleus and have less influence on the overall size of the atom. Protons and electrons are subatomic particles that make up atoms. Protons are positively charged particles found in the nucleus of an atom, while electrons are negatively charged particles that orbit the nucleus in shells or energy levels.

Learn more about atomic radius here:

https://brainly.com/question/14544878

#SPJ4