what does LPG stand for? mention one important source of LPG give sort answer
Answer:
liquefied petroleum gas
LPG is prepared by refining natural gas. it is made by refining crude oil or from extracted natural gas streams as they emerge from the ground.
The balanced equation for the reaction between aqueous ammonium sulfate and aqueous barium acetate is:________.
A. (NH4)2SO4 (aq) + Ba(C2H302)2 (aq) - Baso, (aq) + 2 NH.C2H2O2 (s).
B. (NH4)2SO3 (aq) + Ba(C2H302)2 (aq) - BaSO3(aq) + NH.C2H3O2 (aq).
C. (NH4)2SO4 (aq) + Ba(C2H302)2 (aq) - BaSO4(s) + 2 NH C2H2O2 (aq).
D. (NH4)2SO4 (aq) + Ba(C2H202)2 (aq) - BaSO4(s) + NHC2H2O2 (aq).
E. NH,SO4 (aq) + BaC2H302 (aq) -- BaSO4(s) + NH4C2H2O2 (aq).
Answer:
(NH4)2SO4 (aq) + Ba(C2H302)2 (aq) - BaSO4(s) + 2 NH4C2H3O2 (aq).
Explanation:
In balancing redox reaction equations, the rule of thumb is that the number of atoms on the left hand side of the reaction equation must be equal to the number of atoms of the same element on the left hand side of the reaction equation.
To ensure this, the correct coefficients are written in front of each of the reactants/products and the number of atoms of each element is counted to ensure that the equation is balanced.
If all these procedures are meticulously carried out, the balanced equation for the reaction between aqueous ammonium sulfate and aqueous barium acetate is:
(NH4)2SO4 (aq) + Ba(C2H302)2 (aq) - BaSO4(s) + 2 NH4C2H3O2 (aq).
What types of house are found in very cold regions
Answer:
the house found in a very cold are Igloos or the ice house
In a solution, the solvent is
ANSWER:
A. always water
B. dissolved in the solute
C. present in larger amount than the solute is
D. always nonpolar
Answer:
dissolved in the solute
Explanation:
A solvent is the component that dissolves the solute and is present in larger amount. The type of solution is determined by the state of the solute and solvent. If you have NaCl, a solid, dissolved in water, a liquid, the type of solution is a solid/liquid solution.
Plz help me ASAP in my final project I am ready to pay 20$
Answer:
what do you need help with
A physical chemist measures the temperature inside a vacuum chamber. Here is the result.
T= - 35.903°C
Convert T to SI units.
This is an acronym of the word Systeme International in French. Its International System of Units (SI) is a metric system that would be universally acknowledged as a measurement standard, and the further discussion can be defined as follows:
SI units play an important function in research and innovation in science and technology. In this, the temperature will be measure in the kelvin.Conversion [tex]^{\circ} \ to \ K[/tex]:
let,
[tex]\to 0^{\circ}\ C + 273.15 = 273.15\ K\\\\[/tex]
So,
[tex]\to -35.903+273.15=237.247\ K[/tex]
Therefore, the final answer is "237.247".
Learn more:
brainly.com/question/13347763
Write the balanced reaction for the methanol cannon demo that includes their Lewis structures . The reaction is the combustion of methanol (CH3OH). Include the states (s, l, g) in your balanced equation as well.
Answer:
The reaction is the combustion of methanol (CH3OH).
Write the balanced chemical equation.
Draw Lewis structures for each structure.
Explanation:
The balanced chemical equation for the combustion of methane is shown below:
[tex]2CH_3OH(g)+3O_2(g)->2CO_2(g)+ 4 H_2O(g)[/tex]
Lewis structures of the given molecules are shown below:
a 150 j of energy is added to a system that does 50 j of work is done.by how m uch will tyhe internal energy of system be raised?
The internal energy of system is raised by 3 times
The chemical formula for hydrogen chloride is HCl A chemist determined by measurements that moles of hydrogen chloride participate in a chemical reaction. Calculate the mass of hydrogen chloride that participates. Be sure your answer has the correct number of significant digits.
The question is incomplete, the complete question is;
. A chemist determined by measurements that 0.015 moles of hydrogen chloride participate in a chemical reaction. Calculate the mass of hydrogen chloride that participates Round your answer to 2 significant digits. x S. ?
Answer:
0.54 g
Explanation:
Recall that;
Number of moles = mass/molar mass
Molar mass of HCl =36.5 g/mol
Mass= number of moles × molar mass
Mass= 0.015 moles × 36 g/mol
Mass= 0.54 g
Rank the following compounds in order of decreasing boiling point: sodium chloride (NaCl), methane (CH4), and iodomethane (CH3I). Rank from highest to lowest boiling point.
Answer:
CH4< CH4I< NaCl
Explanation
NaCl has the boiling point of 1,413°C ( 2,575°F )
CH3I has a boiling point of 42°C ( 107°F )
CH4 has the boiling point of -161.6°C ( -258.9°F )
Which elements are main-group elements?
1. Te
2. K
3. V
4. Re
5. Ag
Answer:
Te
K
Explanation:
Main group elements are elements designated and located on the s-block and p-block on the periodic table. The core group or prominent elements are the elements that make up those groups. These groupings comprise the most naturally rich and abundant elements. The main group elements are those whose characteristics are more predicted as a function of their periodic table location. From the given options, only Te and K are elements of the main-group.
g 250. mL of a solution is created and has a molarity of 1.50 M. What is the molality of this solution if the volume and density of the pure solvent is about the same as the volume and density of the final solution and the density of the pure solvent is 1.15 g/mL
Answer:
1.30 m
Explanation:
First we calculate the number of moles of solute in the solution, using the definition of molarity:
Molarity = moles / litersConverting 250 mL ⇒ 250 / 1000 = 0.250 Lmoles = 1.50 M * 0.250 L = 0.375 molesThen we calculate the mass of solvent, using the given volume and density:
1.15 g/mL * 250 mL = 287.5 gConverting 287.5 g to kg ⇒ 287.5 / 1000 = 0.2875 kgNow we calculate the molality of the solution:
molality = moles of solute / kg of solvent = 0.375 mol / 0.2875 kgmolality = 1.30 m1. A positive value for AH for a chemical reaction is an indication of which of the following?
A. Reactants have higher potential energy and the reaction is endothermic.
B. Reactants have higher potential energy, and the reaction is exothermic.
C. Products have higher potential energy, and the reaction is endothermic.
D. Products have higher potential energy, and the reaction is exothermic.
Answer:
C. Products have higher potential energy, and the reaction is endothermic.
The table shows the nature of reactants and products formed in a certain type of chemical reaction.
Nature of Reactants and Products
Reactants
Metal + lonic compound
Products
Metal + lonic compound
Which of the following is true about the type of chemical reaction?
it is a single replacement reaction, and the anions in the two inic compounds are different.
It is a single replacement reaction, and the cations in the two ionic compounds are different.
It is a double replacement reaction, and the anions in the two ionic compounds are different.
It is a double replacement reaction, and the cations in the two ionic compounds are different.
Answer: It is true about the type of reaction that it is a single replacement reaction, and the cations in the two ionic compounds are different.
Explanation:
When one element in a compound is replaced by another element in a chemical reaction then it is called a single replacement reaction.
For example, [tex]K + NaCl \rightarrow KCl + Na[/tex]
Here, potassium metal is replacing the sodium metal in the sodium chloride compound.
As metals become cation by losing an electron in a chemical reaction.
Thus, we can conclude that it is true about the type of reaction that it is a single replacement reaction, and the cations in the two ionic compounds are different.
Answer: Its A
Explanation:
a single replacement reactions, and the ANIONS in the two ionic compounds are different
Answer True or False for each of the following statements. (a) The carburization surface was maintained at slightly less than 0.25 wt% carbon for each specimen. (b) Comparing the finished specimens at a depth of 0.20 mm, specimen A features the lowest carbon concentration. (c) Comparing the finished specimens as a whole, specimen D features the lowest overall amount of carbon.
Answer:
verdadero/a
falso/b
verdadero/c
Explanation:
In an endothermic reaction, reactants are __ products.
equal to
less stable than
more stable than
equally stable than
A
(c) 2 C(s) + MnO2(s)
Mn(s) + 2 CO(g)
O combination reaction
O decomposition reaction
O combustion reaction
O single-displacement reaction
Answer: The reaction, [tex]2C(s) + MnO_{2}(s) \rightarrow Mn(s) + 2CO(g)[/tex] is a single-displacement reaction.
Explanation:
A chemical reaction in which one element of a compound is replaced by another element participating in the reaction.
For example, [tex]2C(s) + MnO_{2}(s) \rightarrow Mn(s) + 2CO(g)[/tex]
Here, the element manganese is replaced by carbon atom. As only one element gets replaced so, it is a single-displacement reaction.
Thus, we can conclude that [tex]2C(s) + MnO_{2}(s) \rightarrow Mn(s) + 2CO(g)[/tex] is a single-displacement reaction.
Does a reaction occur when aqueous solutions of copper(II) nitrate and calcium chloride are combined
Answer:
Does a reaction occur when aqueous solutions of copper(II) nitrate and calcium chloride are combined?
Explanation:
The given reaction is an example of a chemical double displacement reaction.
The mutual interchange of the ions takes place.
The balanced chemical equation of the reaction is:
[tex]Cu(NO_3)_2(aq)+CaCl_2(aq) -> Ca(NO_3)_2(aq)+CuCl_2(aq)[/tex]
All the products formed are also highly soluble.
So, all the ions are spectator ions.
Hence, all will cancel with each other and ions remain in the net ionic equation and hence, the reaction does not take place.
How many hydrogen atoms are in 3.90 mol of ammonium sulfide?
Answer:
First, the number of ammonium sulfide molecules should be calculated:
N = NA × n,
where NA - the Avogadro number, n - number of moles.
N (ammonium sulfide) = 6.022 × 1023 × 8.5 mol = 51.187 × 1023.
The moelcular formula of ammonium sulfide is (NH4)2S. It means that each molecule contains 8 hydrogen atoms.
As a result, 8.5 mol of (NH4)2S contain:
51.187 × 1023 × 8 = 41 × 1024 hydrogen atoms.
Answer: 41 × 1024 hydrogen atoms
Which of the following is true for balancing equations?
A. There must be an equal number of atoms of each element on both sides of the equation.
B. The number of products should be equal to the number of reactants
C. The properties of products should be the same as the properties of the reactants
D. There must be an equal number of compounds on both sides of the equation
Answer:
A.
Explanation:
An equation with the equal amount and proportion of atoms of each element on both sides of the reaction is commonly referred to as a balanced chemical equation.
The law of conservation of matter asserts that no observable and empirical change in the amount of matter occurs within a conventional chemical process. As a result, each element in the product would have the same equal amount or numbers of atoms as the reactants.
Select the statement that best answers the following question What effect does the anion of an ionic compound have on the appearance of the solution?
a. The anion affects the intensity of the color more than the color of the solution.
b. The anion affects the color of the solution more than the intensity of the color.
c. The anion does not affect the color or color intensity of the solution.
d. The anion only affects the intensity of the color in a solution.
Answer:
b. The anion affects the color of the solution more than the intensity of the color.
Explanation:
An ionic compound is one that is made up of ions held together by electrostatic forces. The ions are made up of positively charged ions known as cations and negatively charged ions known as anions. In compounds with a high ionic attribute, anions produce colorless compounds. But compounds that have less ionic attributes produce deeper colors like black and red. When in solutions, ionic compounds take on color and this is because of the anion that absorbs infrared light energy.
Which piece of equipment would be BEST to measure 5 mL of a liquid? A 50 mL beaker filled half way between 0 and 10 mL markings A 50 mL Erlenmeyer flask filled half way between 0 and 10 ml markings A 10 mL graduated cylinder A disposable dropper A 100 mL graduated cylinder
Answer:
Which piece of equipment would be BEST to measure 5 mL of a liquid?
A 50 mL beaker filled halfway between 0 and 10 mL markings
A 50 mL Erlenmeyer flask filled halfway between 0 and 10 ml marking
A 10 mL graduated cylinder
A disposable dropper
A 100 mL graduated cylinder
Explanation:
To measure 5 mL of a liquid, the best equipment is
a 10 mL graduated cylinder.
The remaining apparatus do not give an accurate measurement because readings are not marked on them.
I have 50.00 mL of 0.100 M ethyl amine (C2H5NH2). I gradually add a solution of 0.025 M nitric acid (HNO3) to the ethyl amine solution.
Required:
What is the pH after the addition of a total of 201 mL of the nitric acid?
Answer:
4.00 is the pH of the mixture
Explanation:
The ethyl amine reacts with HNO3 as follows:
C2H5NH2 + HNO3 → C2H5NH3⁺ + NO3⁻
To solve this question we need to find the moles of ethyl amine and the moles of HNO3:
Moles C2H5NH2:
0.0500L * (0.100mol/L) = 0.00500 moles ethyl amine
Moles HNO3:
0.201L * (0.025mol/L) = 0.005025 moles HNO3
That means HNO3 is in excess. The moles in excess are:
0.005025 moles HNO3 - 0.00500 moles ethyl amine =
2.5x10⁻⁵ moles HNO₃
In 50 + 201mL = 251mL = 0.251L:
2.5x10⁻⁵ moles HNO₃ / 0.251L = 9.96x10⁻⁵M = [H+]
As pH = -log [H+]
pH = -log 9.96x10⁻⁵M
pH = 4.00 is the pH of the mixture
At 298 K, AHO = -1652 kJ/mol and ASO = 0.097 kJ/(K•mol). What is the Gibbs
free energy of the reaction?
Based on the calculations, the Gibbs's free energy for this chemical reaction is equal to -1,680.906 kJ/mol.
Given the following data:
Enthalpy of reaction (ΔH°) = -1652 kJ/mol.Temperature = 298 K.Entropy of reaction (ΔS°) = 0.097 kJ/mol.What is Gibbs's free energy?Gibbs's free energy simply refers to the quantity of energy that is associated with a particular chemical reaction.
Mathematically, the Gibbs's free energy for this chemical reaction can be calculated by using this formula:
ΔG° = ΔH° - ΔS°
Substituting the given parameters into the formula, we have;
ΔG° = -1652 × 10³ - (298 × 0.097)
ΔG° = -1652 × 10³ - 28.906
ΔG° = -1,680.906 kJ/mol.
Read more on Gibbs's free energy here: brainly.com/question/18752494
#SPJ1
A sample of 10.6 g of KNO3 was dissolved in 251.0 g of water at 25 oC in a calorimeter. The final temperature of the solution was 21.5 oC. What is the molar heat of solution of KNO3
Answer:
36.55kJ/mol
Explanation:
The heat of solution is the change in heat when the KNO3 dissolves in water:
KNO3(aq) → K+(aq) + NO3-(aq)
As the temperature decreases, the reaction is endothermic and the molar heat of solution is positive.
To solve the molar heat we need to find the moles of KNO3 dissolved and the change in heat as follows:
Moles KNO3 -Molar mass: 101.1032g/mol-
10.6g * (1mol/101.1032g) = 0.1048 moles KNO3
Change in heat:
q = m*S*ΔT
Where q is heat in J,
m is the mass of the solution: 10.6g + 251.0g = 261.6g
S is specififc heat of solution: 4.184J/g°C -Assuming is the same than pure water-
And ΔT is change in temperature: 25°C - 21.5°C = 3.5°C
q = 261.6g*4.184J/g°C*3.5°C
q = 3830.87J
Molar heat of solution:
3830.87J/0.1048 moles KNO3 =
36554J/mol =
36.55kJ/mol
How many moles of carbon dioxide at STP will fit in a 50 liter container?
Answer:
n = 2.23 moles
Explanation:
Given the following data;
Standard temperature = 273 K
Standard pressure = 101.325 kPa
Volume = 50 liter
R = 8.314 J/mol·K
To find the number of moles, we would use the ideal gas law formula;
PV = nRT
Where;
P is the pressure.V is the volume.n is the number of moles of substance.R is the ideal gas constant.T is the temperature.Making n the subject of formula, we have;
[tex] n = \frac {PV}{RT} [/tex]
Substituting into the formula, we have;
[tex] n = \frac {101.325*50}{8.314*273} [/tex]
[tex] n = \frac {5066.25}{2269.722} [/tex]
n = 2.23 moles
Therefore, 2.23 moles of carbon dioxide at STP will fit in a 50 liter container.
discuss the benefits of observing good safety measures in relation to increase in productivity within a pharmaceutical laboratory?
Answer:
Pharmaceutical laboratory helps in devloping and conducting research, vaccines. Various kinds of drugs and chemical substances used and are produced at a Pharmaceutical laboratory.
The pharmaceutical laboratories performs with various hazardous substances that results in exposure to various chemicals, biological substances and radiation. To avoid any injury or infection labs need to maintain all safety measures.
Spillage and relaseing chemical substances can be lethal during transportaions by safety measures for heling in for manufacturing of such therapeutic agents spillage and avoid wastage.
Maintaining good safety standards in the pharmaceuticals laboratory will help promote the health of technicians and workers which in turn will increase productivity and attain positive outcomes.
this was in my science test just want to see if anyone knows?? the wording is so confusing
the relative atomic mass of an element compares the mass of an atom of an element with the mass of an atom of.......
Answer:
the molar mass of the element
A mixture is -
A. a pure substance made through chemical processes
B. a pure substance made through physical processes
C.
an impure substance made through chemical processes
D.
an impure substance made through physical processes
Answer:
C
Explanation:
an impure substance made through chemical process
meeet.gooogle.com/ttp-wdqt-pad
Por favor, me ajudem.
Please, help me.
Someone can teach me English, because I'm from Brazil and if you know how to speak Spanish, it's better for me.
