Answer:
true
Explanation:
on the different categories you have to have that
true/false: you may use the exit() function to return the flow of control from a function back to main() regardless of where the function was called from.
Answer:
Explanation:
it is true sorry if you did not know but im smarter than.....
oh sorry rong person
consider a scenario in which you develop a c program on a computer that has a pentium processor and compile the program into the corresponding machine language. what step should you take to run the same program on a computer that has an alpha processor?
You need to recompile the C program on the computer with an alpha processor.
Define C program?C is a programming language for general-purpose computers. Dennis Ritchie invented it in the 1970s, and it is still widely used and influential today. C's features are designed to accurately reflect the capabilities of the targeted CPUs.C is a general-purpose computer programming language created in 1972 at Bell Telephone Laboratories by Dennis Ritchie for use with the Unix operating system. It was given the name 'C' because many of its features were derived from an earlier language known as 'B'.C is a procedural and general-purpose programming language that provides low-level access to system memory. To convert a C program into an executable that a computer can run, it must be run through a C compiler.To learn more about C program refer to:
https://brainly.com/question/26535599
#SPJ4
once the location is acquired (ip address 88.151.243.8) what does your computer do with that information?
The computer will connect to the website once the location has been obtained.
An IP address is what?The IP address of a device acts as its distinct identity on the internet or a local network.The term "Internet Protocol" refers to a set of rules that regulate the format of data transferred over a private or public network.The IP address permits communication between your computer and other computers connected to a network, much like a real address would.Your PC's unique identity acts as a fingerprint, allowing you to identify it in the event of malicious activity.Using an internet protocol (IP) address, computers can send and receive data over the internet.Public, private, static, and dynamic IP addresses are the four categories under which they are categorised.To learn more about IP Address refer to:
brainly.com/question/21864346
#SPJ4
how do you know a field is a measure when selecting from the field list of a pivottable?
In the Field List, all measures are listed together.
They are highlighted in the field list.
They are not on the field list.
In the field list, they are prefixed by a "fx".
Name:=formula/function/expression.
=function(argument, argument, etc.).
Name=formula/function/expression.
[Name]:=formula/function/expression.
DAX (Data Analysis Expressions) (Data Analysis Expressions).
Functions in Excel.
SQL (Sequential Query Language) (Sequential Query Language).
M stands for M Query Language. To view the PivotTable Field List, go to:
In the pivot table arrangement, click any cell.
When a pivot cell is chosen, the PivotTable Field List pane should display to the right of the Excel window.
If the PivotTable Field List task pane does not display by default, perform the following actions to activate it:
In the pivot table arrangement, click any cell.
Click the PivotTable Analyze tab on the Excel Ribbon.
Then, on the far right, in the Show group, select the Field List command.
Learn more about Excel from here;
https://brainly.com/question/30324226
#SPJ4
what is the terrmgiven to cloud-brokered site-to-site vpn tunnels built using ciscoo meraki mx security appliance
"Meraki AutoVPN" authentication is the name given to cloud-brokered site-to-site VPN tunnels constructed using Cisco Meraki MX Security Appliance.
Site-to-site VPN tunnelling technology called Meraki AutoVPN was created utilising the Cisco Meraki MX Security Appliance. Users can access resources from each location without having to manage several VPNs thanks to this safe, encrypted connection between two or more sites. Meraki AutoVPN streamlines installation by eliminating the need for intricate setups, manual involvement, or the setting up of static routes. It is intended to deliver safe, private, and dependable access between various sites while facilitating simple scaling as required. Furthermore, Meraki AutoVPN is incredibly secure, using strong authentication and encryption techniques to guarantee that data is kept safe and secure. Because of this, Meraki AutoVPN is the best option for businesses with various locations that need secure and dependable connection between them.
To learn more about Authentication click here:
brainly.com/question/17217803
#SPJ4
your task is to implement two versions of the example reducer from mdn, so that these new functions can handle non-numeric values in the array in a graceful manner. here are the 2 functions you need to implement:
Reduce accepts two arguments in this example: the total and the current amount. The reduce method, like a for-loop, runs over each integer in the array. The total value is the number on the far left (29.76) when the loop begins, and the current amount is the one adjacent to it.
The reduce() method executes a user-supplied "reducer" callback function on each element of the array, in order, passing in the return value from the calculation on the preceding element. The final result of running the reducer across all elements of the array is a single value. Our accumulator starts at 0, which is the value we passed to reduce. The item is added to the accumulator with each call to the function. The last call to the procedure has an accumulator value of 15 and an item value of 15, therefore 15 + 15 equals 30 as our final value. The reduce() function condenses an array of values into a single value. It applies a reducer function to each element of the array to obtain the output value. The names defined in the function definition are known as Java script Function Parameters, while real values supplied to the function in the function definition are known as arguments. Parameter Guidelines: In JavaScript function declarations, there is no requirement to declare the data type for arguments.
Learn more about array from here;
https://brainly.com/question/19570024
#SPJ4
If startButtonclicked is false and score = 1000, what is displayed after the code is run?a. Press Start.
b. You Win!
c. Keep Trying!
d. Press Start. You Win!
If start Button clicked is false and score = 1000, what is displayed after the code is run Press Start.
Beginning with Microsoft Windows 95, the Start or Start button has been a part of every version of Windows thereafter. By using the Start menu, you may quickly setup Microsoft Windows and access your computer programmes.
The Apple menu is Apple's equivalent of the Windows Start and Start menu if you have a Mac with macOS.
Examples of the various Windows Start buttons are shown in the image. The first Start present in early versions of Microsoft Windows was the grey Start at the top. This green Start made a brief cameo in Windows XP in the second image. In order to create the Start Orb, which was used with Windows Vista and Windows 7, the term "Start" was next eliminated.
Learn more about start Button clicked:
https://brainly.com/question/1601405
#SPJ4
the content of a 16-bit register reads 0xb612. (a) what is the decimal value when interpreted as an unsigned number?
Unsigned numbers have no sign and can just contain the magnitude of the number. Therefore, only positive values can be used to represent unsigned binary numbers.
If 00010001 is considered an unsigned number, what decimal value does it have?The answer is that 17. It is located by applying the common binary to decimal conversion.
What is the difference between signed and unsigned decimal?A signed number has both positive and negative numbers in addition to the value zero, whereas an unsigned number only has zero or positive values. The maximum value of signed numbers is halves that of unsigned numbers.
To know more about Unsigned numbers visit :-
https://brainly.com/question/15282700
#SPJ4
what is the proper order for the fetch-execute cycle? responses fetch, store, decode, execute fetch, store, decode, execute fetch, decode, execute, store fetch, decode, execute, store store, fetch, execute, decode store, fetch, execute, decode fetch, execute, decode, store
Sets of directions that are stored to use the binary numerals make up a computer program. The Central Processing Unit's CPU employs instructions in the collect decode execute cycle.
What are the fetch execute cycle's four stages?The machine cycle consists of four phases. Fetch: To retrieve a memory instruction. Decode: Convert the instructions that were acquired into computer commands. Execute - Put the computer directives into action. Send the findings, then store them in memory.
In the fetch step of the cash operating cycle, which steps are involved?The program counter's contents, which include the destination of the following instruction that must be executed, are next loaded into the data memory register during the fetch phase of the cycle.
To know more about CPU visit:
https://brainly.com/question/16254036
#SPJ4
which name is associated with zero defects? a. crosby b. deming c. juran d. feigenbaum
A well-liked and respected idea in quality management, zero defects was first used by Mr. Philip Crosby in his book "Absolutes of Quality Management."
In fact, Six Sigma has decided to make it one of its core beliefs.
Sadly, there has been some reasonable opposition to the notion, with some claiming that a state of zero flaws is impossible. Others have made a concerted effort to disprove the doubters, pointing out that "zero faults" in quality management does not refer to perfection but rather to a situation in which waste is removed, defects are decreased, and you are upholding the highest standards of quality in projects.
The goal of the Zero Faults mindset is to eliminate quality defects inside a company.
Literally speaking, it should be clear that no significant or complicated manufacturing project can achieve zero faults.
Learn more about Management here:
https://brainly.com/question/13609051
#SPJ4
which typoes of i/o buffering woulb be appropriate for a gaming laptop? why?
Data that is being exchanged between two devices or between a device and an application is stored in a buffer, which is a memory space. I/O Buffering Applications.
Buffering assists in ensuring that C.P.U. and I/O devices operate at maximum speed so that neither is ever idle. This is especially helpful if C.P.U. and I/O devices are roughly the same speed. Time is saved and numerous processes may run at once thanks to double buffering. It permits the use of one set of data while another set is being gathered, after which the two sets of data alternate. By allowing synchronous operations, such as file reads and writes, to finish quickly rather than blocking while awaiting hardware interrupts to access a physical disc subsystem, buffers can improve application performance. An operating system can instead immediately return a successful result from an API call,
To learn more about Data click the link below:
brainly.com/question/10980404
#SPJ4
a table withno repeating groups in any attribute and atomic values in each column is, at a minimum, in what normal form?
The values in each column is, at a minimum, in what normal form is first normal form.
What is first normal form?
It is impossible to divide an atomic value. For instance, the values in the [Color] column in the first row of the table below may be split into "red" and "green," therefore [TABLE PRODUCT] is not in 1NF. It is a standardization level in DBMS. When a relation has an atomic value, it is referred to as being in 1 normal form (or 1NF) in DBMS. In other words, according to 1NF, a table's attribute will only be allowed to retain an attribute with a single value, not multiple values.
Learn more about first normal form: https://brainly.com/question/30116421
#SPJ4
during the name resolution process, which server does a local recursive server contact first?
A root name server is used to local recursive server contact first. This server first check the contacts.
The root name server is used first during the name resolution process and TLD server does a local recursive server contact first.
Root name servers are the servers at the root of the Domain Name System (DNS) hierarchy. The DNS is the system which converts Internet domain names.
A recursive DNS lookup is where one DNS server communicates with several other DNS servers to hunt down an IP address and return it to the client.
A TLD nameserver maintains information for all the domain names that share a common domain extension, such as .com, . net, or whatever comes after the last dot in a URL.
Learn more about server here:-
brainly.com/question/7007432
#SPJ4
Air waves are an example of what type of network component?options:a)interconnecting deviceb)Network Interface Cardc)network protocold)network medium
Network medium: Signals are transmitted between two or more devices using air waves as a sort of network medium when using a wireless connection.
Like radio waves, microwaves, and infrared radiation, which are all categorised as parts of the electromagnetic spectrum, air waves are a kind of electromagnetic radiation. Signals are transmitted between two or more devices using air waves as a sort Between two or more devices, such as a computer, a router, and a wireless access point, they are used to wirelessly transmit data. An example of a physical layer component in a network is an air wave, which is a sort of network medium. Transmission of unprocessed data bits between devices over a network is handled by the physical layer. Digital signals, which are composed of 1s, are sent by air waves.
Learn more about connection here-
brainly.com/question/14327370
#SPJ4
timers could be used to compute the current time. provide a short description of how this could be accomplished.
The correct answer is Timers can benefit from a programme that employs the following procedures to determine the current time via timer interrupts: sets the timer to a time that is a little later than now and goes to bed.
The Samsung TV has a feature called the Sleep Timer that turns the power off after a certain period of time. Typically, the setting is chosen via the television's menu system or the remote control. Understanding Sleep Timer: When the sleep timer approaches "0," this function automatically shuts off the television. Android sleep timer setting. Android users, meanwhile, don't need to worry because you can always set a timer on your Android smartphone. On Android, you can still download third-party apps to set a sleep timer even if there isn't a built-in device for this.
To learn more about Timers click the link below:
brainly.com/question/29850873
#SPJ4
one common task faced by the gis professional is ensuring the quality of spatial data. what geodatabase functionality can be applied to ensure all county polygons fall within the polygon of their respective state?
Apply a topology rule to the geodatabase functionality feature dataset including County and State polygon feature classes to determine whether the State feature class is covered by the Counties feature class.
What common field enables GIS users to join tables to GIS data?ArcGIS allows you to link entries in one table to records in another table using a common field known as a key.
What exactly is a system for creating and managing geographical data and associated attributes?A GIS, or geographic information system, is the most often used tool for processing and analyzing spatial data. These are programs or groups of applications that work together to assist users make sense of their spatial data.
To know more about geodatabase functionality visit :-
https://brainly.com/question/29891854
#SPJ4
in azure you want to deploy an existing app to microsoft azure. the app requires a microservice architecture. what should you use to host the app?
You should use Azure App Service data or Azure Kubernetes Service to host the app in a microservice architecture.
Azure App Service and Azure Kubernetes Service (AKS) are two popular services that can be used to host an existing app requiring a microservice architecture on Microsoft Azure. Azure App Service is a managed Platform-as-a-Service (PaaS) offering for deploying web, mobile, and API apps, as well as providing integrated development and DevOps tools. Azure Kubernetes Service is a managed Kubernetes offering that allows you to easily deploy, scale, and manage containerized workloads. AKS makes it easy to deploy, manage, and scale containerized applications using the popular Kubernetes open-source orchestration system. Both services are suitable for hosting an existing app requiring a microservice architecture, and the decision of which to use depends on your specific needs. Azure App Service is a simpler solution that can be deployed quickly, while AKS offers more control and scalability.
Learn more about data here-
brainly.com/question/11941925
#SPJ4
explains how the list manages complexity in your program by explaining how your program code would be written differently if you did not use the list
One or more procedures, at least one of which contributes to the program's intended goal, and for which you have defined the procedure's name, return type, and any relevant parameters.
What manages complexity in your program code?Use of at minimum one list or other collecting type to represent a collection of data that is saved and used is crucial in order to control program complexity and advance the program's goal.
Therefore, The data abstraction must make it simpler to design the program than alternatives that would be more complex or easier to maintain in the event that future changes to the list size necessitate significant coding changes.
To learn more about program code refers to;
https://brainly.com/question/30026612
#SPJ4
which principle is most violated in section 5 of the email?
Note that the five principles of effective email writing that were violated in the email reference are given as follows:
No empathy - The email lacks a sincere and empathetic tone toward the customer's situation.No clear solution - The email doesn't provide a clear solution to the customer's complaint.Blaming the customer - The email implies that the customer is at fault for the damage to the product.Lack of professionalism - The language used in the email is informal and lacks professionalism.No personalization - The email is not personalized and comes across as a generic response.What is the best way to have responded?Dear [Customer Name],
We are sorry to hear about the damage to your product. Our team has conducted an investigation and we understand that it could have occurred during transportation. To make it right, we would like to offer you a replacement product at no cost to you.
Additionally, as a token of appreciation for your loyalty, we have included a 10% discount coupon for your next purchase of $100 or more.
If you have any further questions or concerns, please do not hesitate to reach out. We value you as a customer and are committed to providing you with the best possible experience.
Best regards,
Roberto Jimenez
Customer Service Representative
Learn more about Email Writing:
https://brainly.com/question/26555351
#SPJ1
Full Question:
1) Identify five principles violated in this email.
2) Re-write the email following the principles of writing an effective email
How is Layer 3 roaming accomplished in a unified wireless deployment?
A. An EoIP tunnel is created between the client and the anchor controller to provide seamless connectivity as the client is associated with the new AP.
B. The client entry on the original controller is passed to the database on the new controller.
C. The new controller assigns an IP address from the new subnet to the client
D. The client database on the original controller is updated the anchor entry, and the new controller database is updated with the foreign entry.
The client database on the original controller is updated the anchor entry, and the new controller database is updated with the foreign entry. Thus, option D is correct.
What is EoIP tunnel?An EoIP tunnel is created between the client and the anchor controller to provide seamless connectivity as the client is associated with the new AP.The client entry on the original controller is passed to the database on the new controller.
The new controller assigns an IP address from the new subnet to the client. The client database on the original controller is updated the anchor entry, and the new controller database is updated with the foreign entry.
Therefore, The client database on the original controller is updated the anchor entry, and the new controller database is updated with the foreign entry. Thus, option D is correct.
Learn more about database on:
https://brainly.com/question/29412324
#SPJ1
which factor classifies a host as a server?
a. the CPU speed
b. the software installed
c. the amount of memory
d. the network connection
e. the server software that provides desired server services.
The factor that classifies a host as a server is the server software that is installed and provides the desired server services. This software defines the server's capabilities and functions.
The factor that classifies a host as a server is the server software that is installed and provides the desired server services. This software defines the server's capabilities and functions and determines what tasks it can perform. CPU speed, amount of memory, and network connection are all important considerations when choosing a server, but the software installed is the most important factor in classifying a host as a server. The software dictates the types of services that can be provided, such as web hosting, data storage, or application hosting. Without the correct software, a host will be unable to provide the desired services. Therefore, the server software is the most important factor when deciding if a host qualifies as a server.
Learn more about software here-
brainly.com/question/29946531
#SPJ4
a frenzy of self-forgetting in which the self gives way to a primal unity where individuals are at one with others and with nature.
The all-encompassing womb to which, under the sway of Dionysus, we can all return. Men forget their differences and act as a community when overcome by the euphoric delight brought on by Dionysus.
Dionysus represents disorder, intoxication, emotion, ecstasy, and unity, while Apollo represents harmony, progress, clarity, logic, and the concept of individuation (hence the omission of the principle of individuation). The Dionysian, on the other hand, is the art of insanity, emotion, ecstasy, and most importantly, union. Humans and nature can both be united by the Dionysian power. There are no boundaries in a Dionysian bliss. Under the experience of primal unity, everything merges into one.
Learn more about merges here-
https://brainly.com/question/14913705
#SPJ4
What error would the following function give on compilation?
f(int a, int b)
{
int a;
a = 20;
return a;
}
A. Missing parenthesis in return statement
B. The function should be defined as int f(int a, int b)
C. Redeclaration of a
D. None of above
The given function won't run because it attempts to declare the already-existing variable "a," which is against C language rules. This will lead to a "redeclaration of a" error.
The function in question tries to declare a variable named "a" twice. This is a prohibited operation in the C programming language, and when the function is compiled, it will produce the error "redeclaration of a." This is due to the fact that once a variable is defined in C, it must stay undeclared until the end of the scope; otherwise, a compile-time error would occur. Consequently, the provided function won't build and will result in this error. It should be noted that the function might also have additional problems, such as the return statement's missing parentheses and the fact that the function should actually be written as an int function (int a, int b). The redeclaration, however, is the primary problem.
Learn more about functions here-
brainly.com/question/28939774
#SPJ4
which nato and institute for electrical and electronic engineers (ieee) frequency band ranges are both 1 to 2 ghz?
The I band frequency band ranges are 1 to 2 GHz for both the nato and the institute for electrical and electronic engineers (ieee).
Which IEEE radar band is it?The IEEE radar bands and the microwave frequency bands are identified by letters. Around the time of the Second World War, military names were given to the frequencies used in radar, the first use of microwaves.
Which IEEE standard works at both 2.4 GHz and 5 GHz wireless frequencies?IEEE 802.11n is a dual-band device that was released in 2009 and operates in the 2.4 GHz and 5 GHz frequency bands. With a range of up to 70 meters, typical data rates range from 150 to 600 Mb/s.
To know more about frequency visit :-
https://brainly.com/question/29739263
#SPJ4
what happens to navigational signal at 6500 what happens?
At a height of 6500 feet, the decreasing air density in the upper atmosphere causes navigational signals to deteriorate. The signals connection may be more difficult to detect and decipher as a result.
The air is significantly less dense at 6500 feet than it is at sea level. As a result, navigational signals have reduced signal strengths, which makes it more difficult to identify and understand them. This is so because the signal must travel through the air, and the signal is weaker the lower the air density. Since they will be less precise at higher altitudes, this can be challenging for aircraft and other navigational devices. Furthermore, other elements like atmospheric pressure, temperature, and wind may also have an impact on how well the signal is picked up. Therefore, in order to maintain accuracy at all altitudes, navigational systems must be able to account for these variations.
Learn more about connection here-
brainly.com/question/14327370
#SPJ4
true|false: disk defragmenter utility identifies and eliminates nonessential or temporary files from the disk drive to improve the disk performance. group of answer choices true false
The given statement is false as it is not a disk defragmenter utility but rather Disk Cleanup Utility that analyses the disc drive and removes unnecessary or transient files to increase disc performance.
Disk defragmentation consolidates the vacant space on the disc and speeds up data access. The Disk Defragmenter utility from Endpoint Central facilitates the defragmentation procedure. The performance of your discs and drives is improved by disc defragmentation, which reorganizes fragmented data.
To put all the pieces of a file together, the defragmentation process moves the data blocks on the hard drive around. Defragmentation decreases file system fragmentation, enhancing the effectiveness of data retrieval. As a result, files are stored continuously, which speeds up how quickly your computer can read the disc and retrieve the files you require,
To learn more about disk defragmenter click here:
brainly.com/question/14940701
#SPJ4
help due tonight, danger of failing
Answer:
15.) The value of the variable areaRect after the above statements have been executed is 70.0.
The first statement assigns the value of 7.0 to the variable 1en. The second statement assigns the value of 10.0 to the variable width.
Finally, the third statement multiplies the value of 1en with the value of width and assigns the result to the variable areaRect.
So areaRect = 1en * width = 7.0 * 10.0 = 70.0
16.) The value of the variable slope after the above statements have been executed is 0.75.
The first two statements assigns the values of 3.0 and 5.0 to the variables x1 and y1 respectively.
The second two statements assigns the values of 10.0 and 8.0 to the variables x2 and y2 respectively.
Finally, the last statement calculates the slope of the line defined by the points (x1,y1) and (x2,y2) using the formula: (y2 - y1) / (x2 - x1) and assigns the value to the variable slope.
So slope = (y2 - y1) / (x2 - x1) = (8 - 5) / (10 - 3) = 3/7 = 0.75
It's worth noting that in the equation given, there is no parenthesis around (y2 - y1) and (x2 - x1) which gives the wrong result, so the correct format should be:
slope = (y2 - y1) / (x2 - x1);
17.) The value of the variable slope after the above statements have been executed is 0.1.
The first two statements assigns the values of 2.0 and 7.0 to the variables x1 and y1 respectively.
The second two statements assigns the values of 12.0 and 9.0 to the variables x2 and y2 respectively.
Finally, the last statement calculates the slope of the line defined by the points (x1,y1) and (x2,y2) using the formula: (y2 - y1) / (x2 - x1) and assigns the value to the variable slope.
in this case, slope = (y2 - y1) / (x2 - x1) = (9-7)/(12-2) = 2/10 = 0.1
18.) The expression 4 + 3.0 is a double.
In this expression, 4 is an integer, and 3.0 is a double. In most programming languages, when you perform an operation involving an integer and a double, the result will be a double.
19). The expression 3.0 + 4.0 is a double.
Both 3.0 and 4.0 are double and when they are added the result is also double.
20.) The expression 4 % 3 is an int.
21.) The expression 5 / 3 is an int.
The / operator performs division. In most programming languages, when you divide two integers, the result will also be an integer, and any remainder is truncated. So, 5 divided by 3 will give 1 as the quotient and 2 as the remainder. The expression 5 / 3 evaluates to 1 which is an integer.
22.) The expression 15.0 / 3 is double.
In this expression 15.0 is a double and 3 is an integer. When we divide a double by an integer, the result will be a double. So, 15.0/3 will give 5.0 as the result. The expression 15.0 / 3 evaluates to 5.0 which is a double.
23.) The expression 17 % 5 is int.
The % operator performs modulo operation which returns the remainder of the division of left operand by the right operand. In most programming languages, when you use the modulo operator with two integers, the result will also be an integer. So, 17 % 5 will give 2 as the remainder. The expression 17 % 5 evaluates to 2 which is an integer.
24.)
sum = sum + 1;sum += 1;sum++;All of these three ways will add 1 to the int variable sum. The first way uses the addition operator (+) and the assignment operator (=) to add 1 to sum. The second way uses the shorthand operator (+=) to add 1 to sum. The third way uses the increment operator (++) to add 1 to sum.
25.)
The first rule for creating a user identifier is that it must start with a letter or an underscore (_).
The second rule is that it can only contain letters, digits, and underscores.
The third rule is that it should not be a keyword or a pre-defined identifier of the programming language you are using.
Note that different programming languages may have different rules for naming conventions, but these are the general rules.
26.) correct
what are features of blockworks online
Link to known concerns on the screen. Screen for selecting a tax tip. having the most recent version at all times. Innovative Finish Screens.
The events and media company BlockWorks Group, which straddles the worlds of traditional finance and digital assets, was co-founded by Jason Yanowitz. Blocks are data structures found in the blockchain database and are used to store transaction data permanently in a cryptocurrency blockchain. A block stores all or a portion of the most recent transactions that the network has not yet verified. The block is closed after the data are verified. The Block Crypto, Inc. creates software for crypto assets and blockchain technology. The business provides a platform on which users may post content, engage in community discussions, access experts, and participate in regular industry events.
Learn more about technology here-
https://brainly.com/question/30037784
#SPJ4
under what circumstances would you turn off windows backup and restore
If another program is taking care of backing up your system and data, or if you don't need to back up your system and data, you should disable Windows backup and restore.
Windows comes with a function called Windows Backup and Restore that enables you to back up your data and system. A backup of your system and data can be made using this practical tool in case something were to happen to corrupt or lose your data. However, you can disable Windows Backup and Restore to conserve system resources if you have another program that handles backing up your system and data or if you don't need to back them up. Windows Settings or the Control Panel are where you can disable Windows Backup and Restore. It's crucial to understand that if you disable Windows Backup and Restore.
Learn more about program here-
brainly.com/question/11023419
#SPJ4
read the following code: for count in range(80) leo.forward(count * 2) leo.left(count 2) there is an error in the for loop. what should be fixed?
Answer:
There is a syntax error in the third line of the for loop where it says "leo.left(count 2)". It should be "leo.left(count*2)" instead. The correct code would be:
for count in range(80):
leo.forward(count * 2)
leo.left(count * 2)
Explanation:
In the original code the count variable is being multiplied by 2 and then passed as an argument to the leo.left() function, but the multiplication symbol was missing and it's being interpreted as an attempt to call a function named "count" with an argument of 2.
