A laptop has a wired connection to a network and is configured with a static IP address. the link light on the nic is lit, but the laptop cannot communicate with any hosts on the local network. [TRUE].
And this is caused by an IP address conflict with another host on the network.
What is IP ConflictIP conflicts can occur when two or more computers or other devices (which support IP addresses) on a network use the same IP address. Remember, the IP address is an identifier on the network, so it is unique or cannot be the same.
Typically, IP address conflicts occur on a local network (LAN). Every device that supports IP addresses has the potential to experience IP conflicts with other devices on a network.
We know there are two kinds of naming IP addresses, namely static IP and dynamic IP. Static IP is filled in manually, which means it won't change as long as the owner doesn't change it. Dynamic IP is an IP that is set automatically, usually only temporary and will work if connected to a router that has a DHCP server service.
Learn more about IP address at https://brainly.com/question/18722788.
#SPJ4
general electric always includes an owner registration form with its products. it asks customers for their names, addresses, phone numbers, birth days, income, as well as various other questions. if the consumer returns the registration, general electric can then sell the information and use it for their own
The registration, general electric can then sell the information and use it for its own buyer directory. Thus option (A) is correct.
What is information?Information is a general term for everything with the capacity to inform. Information is most fundamentally concerned with the interpretation of what may be sensed. Any naturally occurring process that is not entirely random, as well as any discernible pattern in any medium, can be said to convey some level of information.
An international business based in America is called The General Electric Company (GE). GE has created the technology that will shape the industry for more than 125 years. For its work in the power, renewable energy, aviation, and healthcare sectors, GE is best known today.
Therefore, Thus option (A) is correct.
Learn more about the information here:
https://brainly.com/question/13629038
#SPJ1
what is the worst case runtime of adding an element to a darray? assume the capacity is much larger than the number of elements.
Appending array elements has a complexity of O(1) if the allocated array is not smaller than the element being appended.
The Reason behind this is:
If the preceding condition is met, no elements must be moved to insert elements at the end of an array, which is an append operation. Inserting elements anywhere else necessitates the movement of n/2 elements on average, making insertion in that case O(n).
What is Array?
An array is a collection of numbers, pictures, or objects that are organized into rows and columns based on their type. An array is a collection of items, or data, stored in contiguous memory locations, also known as database systems, in coding and programming.
An array's purpose is to store multiple pieces of data of the same type together. An array can be used to demonstrate a mathematical property known as the commutative property of multiplication, which shows that the order of the factors or elements can be changed while the product of the elements remains constant.
To learn more about Array, visit: https://brainly.com/question/19634243
#SPJ4
import data from the operatingexpenses csv file to a new table. use the first row as field names. do not change any field information
Importing data from the operating expenses csv file to a new table, using the first row as field names and not changing any field information we have to follow this procedure.
Step-by-step procedure:
You selected the New Data Source button from the External Data Ribbon Tab in the Import & Link Ribbon Group. You selected the Text File menu item from the New Data Source menu in the From File menu. You selected the Browse... option from the Get External Data - Text File dialogue. You chose Cell 1x1. You selected the Open option from the File Open dialogue. You selected the OK button in the Get External Data - Text File dialogue. You selected the Choose my own primary key option inside the Import Text Wizard dialogue by clicking the Next > button, checking the First Row Contains Field Names check box, clicking the Next > button, clicking the Next > button. Clicked the Radio Button, then the Next > button, and finally the Finish button.You clicked the Close button in the Get External Data - Excel Spreadsheet dialog.To learn more about CSV File, visit: https://brainly.com/question/14338529
#SPJ4
from the current view (layout view) move the premium label control and its bound control to the empty layout area directly to the right of the insurance provider controls in this form
From the current view, to move the premium label control, one should first click the Premium label control.
What is Premium label control?A control called a label simply serves to show text. By default, MS Access populates the Form Header area of the form with a label containing the table name.
The whole process is written below:
Click the Premium label control. Press Ctrl and click the bound control, displaying the premium value. Click and drag to move both controls down to the empty layout area to the right of the Insurance, Provider controls.Therefore, to move the premium label control from the current view, one must first click the control.
To learn more about Premium label control, refer to the link:
https://brainly.com/question/29486566
#SPJ1
A one-time pad (select 2 answers, 1 point each) a. Uses a random stream of bits for its key b. Can re-use key sequences without weakening the cipher Is commonly used for different types od encryption d. Is theoretically impossible to crack Answer: A and C.
Option a and c is correct. A one-time pad uses a random stream of bits for its key, and is commonly used for different types od encryption.
A one-time pad is a method used in cryptography where a message is encrypted using a randomly generated private key just once before being decrypted by the recipient using a one-time pad and key that match.
The benefit of using randomness-based keys for message encryption is that there is theoretically no way to crack the code by looking at a series of messages. It is impossible to spot a pattern because every encryption is distinct from the others and has no connection to the one after it. The question of how to properly provide the key to the decrypting party or how to keep both keys private arises when using a one-time pad since the decrypting party must have access to the same key that was used to encrypt the message.
To know more about one-time pad click here:
https://brainly.com/question/9239971
#SPJ4
Suppose you are interested in detecting the number of hosts behind a NAT. You observe that the IP layer stamps an identification number sequentially on each IP packet. The identification number of the first IP packet generated by a host is a random number, and the identification numbers of the subsequent IP packets are sequentially assigned. Assume all IP packets generated by hosts behind the NAT are sent to the outside world.a. Based on this observation, and assuming you can sniff all packets sent by the NAT to the outside, can you outline a simple technique that detects the number of unique hosts behind a NAT? Justify your answer.b. If the identification numbers are not sequentially assigned but randomly assigned, would your technique work?
A packet sniffer is a simple technique that can detect the number of unique hosts behind a NAT.
Based on the given scenario where all of the IP packets are sent outside, a packet sniffer can be used to keep a record of all packets being generated by hosts behind a NAT. Since, each host generates a sequence of IP packets with sequential numbers and a unique starting identification number (ID), IP packets with consecutive ID numbers can be grouped into a cluster. The total number of clusters represents the total number of unique hosts behind the NAT.
However, in the case when the ID numbers are not assigned sequentially but assigned randomly, the above-suggested technique would not work, as there would not be clusters in sniffed packets.
You can learn more about packet sniffing at
https://brainly.com/question/14093054
#SPJ4
a technology specialist attempts the recovery of a maliciously deleted folder of important data. the specialist uses file carving to try to retrieve the missing data. how does carving handle the data retrieval process?
Milling manages the data retrieval process by means of By analyzing the disk at sector page/level.
This allows the specialist to recover data even if the original directory structure is no longer available.
File recovery through carvingFile recovery is a critical task for a variety of users, from home users to businesses. Many users have experienced the disappointment of losing an important file due to:
Software failureComputer virusAccidental overwritingData corruption
Making file recovery an essential skill for any user. One of the most common techniques for file recovery is carving.
Learn more about File recovery:
https://brainly.com/question/29312407
#SPJ4
How do you clear/remove a print area that has already been defined on the worksheet?.
To clear/remove a print area that has already been defined on the worksheet:
Select the Page Layout tab on the Ribbon. Then select the Print Area option in the Page Setup group. Select Clear Print Area.Clearing a Defined Print AreaPrinting a worksheet is an important part of creating documents, especially when needing to share information with others or present information in a specific format.
In Excel, one of the most useful features is the ability to define a print area. This allows users to select a specific area of their worksheet that they would like to print, rather than printing the entire worksheet. However, there may come a time when a user will need to clear/remove a print area that has already been defined on the worksheet.
Learn more about worksheet at: https://brainly.com/question/10946187
#SPJ4
Also known as a private key cipher, what term is used to describe the encryption where the same key is used to encrypt the document before sending and to decrypt it once it is received?.
The same key is used in symmetric encryption to carry out both encryption and decryption operations.
Asymmetric encryption employs a public/private key combination while symmetric encryption makes use of a shared private key. A random string of bits created especially to jumble and unscramble data is often used as an encryption key. Algorithms used to construct encryption keys make sure that each key is distinct and unpredictable.
The encryption code is more difficult to decipher the longer the key created in this manner. Data is encrypted using 256-bit AES algorithm keys in both the IBM and T10 encryption systems. The US government recognizes and endorses the 256-bit AES encryption standard, which supports three distinct key lengths.
The encryption key server is capable of employing both symmetric and asymmetric encryption techniques. Symmetric encryption, often known as secret key encryption, utilizes one key for both encryption.
To know more about symmetric encryption click here:
https://brainly.com/question/15187715
#SPJ4
TRUE/FALSE. a good with many close substitutes is likely to have relativelyelastic correct demand, since consumers can easily choose to purchase one of the close substitutes if the price of the good rises.
Yes, this is true. Close substitutes for a good will make the demand for that good more elastic, since consumers can easily switch to a different good if the price of the original good rises.
The Impact of Close Substitutes on Price Elasticity of DemandThe demand for a good with many close substitutes is likely to be relatively elastic. This is because when the price of the good increases, consumers can easily switch to one of the close substitutes, which limits the effect of the price increase on demand.
For instance:
If the price of a particular brand of cereal rises, consumers may decide to purchase a different brand of cereal as an alternative, rather than paying the higher price.This ability to switch to a close substitute reduces the impact of the price increase on demand.
Elasticity is an important concept in economics and can be used to understand how prices and demand interact.
When demand is elastic, an increase in price will cause a large decrease in demand. This is because consumers have the ability to switch to close substitutes, which limits the effect of the price increase. On the other hand, when demand is inelastic, an increase in price will cause only a small decrease in demand. In this case, consumers do not have close substitutes available, so they are more likely to continue purchasing the good despite the price increase.Learn more about Elasticity of Demand at: https://brainly.com/question/5078326
#SPJ4
If the focus in a form moves from left to right and you want the focus to move from top to bottom, change the (fill the blank).
If the focus in a form moves from left to right and you want the focus to move from top to bottom, change the tab order.
The pointer advances from field to field according to the tab order. The order in which the fields are added to the form initially determines the tab order. The tab order may frequently become jumbled as fields are moved around the page, added from a template, or copied from another source. There are other scenarios in which you might prefer the tab order to move in a specific direction, like down a column of questions or perhaps across the page from right to left.
Data entry will be more user-friendly and effective if the tabs are arranged in the right order. The tab order will also affect how fields appear on mobile devices.
To know more about tab order click here:
https://brainly.com/question/8887133
#SPJ4
Fill in the blank: A data analyst includes _____ in their R Markdown notebook so that they can refer to it directly in their explanation of their analysis.
a. inline code
b. YAML
c. documentation
d. markdown
Answer: a
Through line biomechanics concentration and observation magic if International Society of Biomechanics in sports.
What is "International Society of Biomechanics in sports"?The recently developed professional association in biomechanics is the "International Society of Biomechanics in sports".It is the professional association in bio-mechanics.
It is an international society which is dedicated to bio-mechanics to sports. The main purpose of the society is to understand and study the human movement and its relation to sport bio-mechanics. They provide information regarding bio-mechanics in sports.
Therefore, Through line biomechanics concentration and observation magic if International Society of Biomechanics in sports.
Learn more about biomechanics on:
https://brainly.com/question/13898117
#SPJ1
Which of the following is a characteristic of cloud-based hosting?
A) unknown cost structure
B) full control of data location
C) no obsolesce
D) in-depth visibility of security
The option which represents a characteristic of cloud-based hosting includes no obsolesce. Thus, the correct option for this question is C.
What is Cloud-based hosting?Cloud-based hosting may be defined as a type of internet hosting service that significantly hosts websites for clients. It offers the facilities required for them to construct and regulate a site and makes it accessible on the World Wide Web.
According to the context of this question, Cloud computing's attributes and advantages may significantly include on-demand self-service, broad network access, and being very elastic and scalable. It determines the characteristics of hosting services which definitely include the utilization of the internet. Due to this, it falls on the field of no obsolesce.
Therefore, the option which represents a characteristic of cloud-based hosting includes no obsolesce. Thus, the correct option for this question is C.
To learn more about Cloud-based hosting, refer to the link:
https://brainly.com/question/15595827
#SPJ1
A new laptop was delivered to your home and left on the porch while you were at work. It is very cold and you don't know how long it has been there. You unpack the computer. You would like to know if it is working properly. What is the best thing to do?
Answer:
Leave the laptop for a while to warm up before switching on.Explanation:
There is a great temperature difference between the laptop (outside environment) and the room environment.
We know internals will be even warmer once started and running. The difference in temperature may cause water condensation and damage to internal parts.
which of the following is the correct way to declare a class in c ? group of answer choices class circle { private: double radius; public: void setradius(double radius); double getdiameter(); double getarea(); double getcircumference(); }; class circle { private double radius; public void setradius(double radius); public double getdiameter(); public double getarea(); public double getcircumference(); }; circle::circle(double radius) { private: double radius
The correct way to declare a class in C++ is {private: double radius; public: void setradius(double radius); double getdiameter(); double getarea(); double getcircumference();}
Class in C++is a user-defined type or data structure declared with the class keyword that has data and functions as members whose access is governed by the three access specifiers private, protected, or public.
It can contain elements that can have variables of both the basic types and other user-defined types. They can be single elements or arrays, pointers, arrays of pointers, among other things.
For more about class inc c++ here https://brainly.in/question/9220742
#SPJ4
When a computer hacker uses multiple compromised computers to carry out a DDOS attack, the compromised computers are usually referred to as which of the following?
Zombies
In a DDoS attack, a group of computers work together to make it difficult for people using a particular resource (like a website or server) by flooding its resources with traffic.
We want to make sure that our target is a good one. When there are a lot of incoming messages, connection requests, or packets that are not correct, the target system can't handle it and slows down or even crashes. This can cause problems for people trying to use the system, or for systems that are using the target system. A DDoS attack is when someone sends a lot of traffic to a website or computer system, usually in an attempt to make it crash.
What is Zombie?computer or network device under the control of an intruder is known as a Zombie, or bot. The attacker sets up a server to control the network of bots. The person in charge of a botnet is called the botmaster.
A botnet is a group of computers that have been infected with a virus, and are working together to do the user's bidding. The first computer to be infected is called the "botmaster", and it controls the other machines in the botnet.
Thus, compromised computers are usually known as Zombies
To Know More About DDoS Attack, Check Out
https://brainly.com/question/29238912
#SPJ4
describe at least one stored procedure for this project. explain why using a stored procedure would be a good idea. explain what the stored procedure would do
The overall average of a client's service over a certain time period might be determined for this project using a stored method.
The customer care team may rapidly spot any areas where a client requires more attention or may be experiencing problems with the service by calculating the average rate of a client's service over a specified period of time.
Explanation:
In order to execute a predictable and consistent computation each time, to use a stored procedure would be a smart approach. This would guarantee that the same computation is made every time and make it simple to incorporate any modifications, like the addition of new factors or metrics.
To know more about Stored procedure
https://brainly.com/question/13692678
#SPJ4
import the text-boydair10.txt file from your downloaded from the resources link. use the first row as column headers.
To import the text-boydair10.txt file
URL resource = getClass().getClassLoader().getResource("text-boydair10.txt");
This is how we can import a text file from our downloaded from the resources link.
What is resource link?An object in the Data Catalog known as a resource link is a connection to a database or table that is either private or public. The name of the resource link that you create to a database or table can be used in place of the database or table name after you create the resource link.
Table resource links are returned by glue:GetTables() and show up as entries on the Lake Formation console's Tables page in addition to any tables that you own or have access to. Similar behavior is displayed by resource links to databases.
A database or table in your Data Catalog may be given a different name. This is particularly helpful if multiple databases in your account contain tables with the same name from different AWS accounts, or if those databases are shared by other AWS accounts.
Learn more about resource link
https://brainly.com/question/26211894
#SPJ4
question 3: structural hazards: assume that the architecture has fixes only for structural hazards, and not data hazards or control hazards. for the same mips code as q2, write the complete 5-stage pipeline implementation by (i) resolving structural hazard for memory access only and compute the effective cpi (ii) resolving structural hazard for register access only and compute the effective cpi (iii) resolve both the structural hazards and compute the effective cpi
Instruction fetch ,Instruction decode , Execute ,Memory access and
Writeback these are the five stages of pipeline implementation
What is meant by stages of pipeline implementation ?
Pipelining is an implementation technique in which multiple instructions are executed at the same time. The computer pipeline is broken down into stages. In parallel, each stage completes a portion of an instruction.
Instruction fetch ,Instruction decode , Execute ,Memory access and
Writeback these are the five stages of pipeline implementation
Obtaining instructions
The instructions are stored in memory and are read in one cycle.
Decoding instructions
Another distinction between the first RISC machines and earlier CISC machines
Execute
The actual computation takes place during the Execute stage.
Access to memory
If you need to access data memory,
Writeback
Both single cycle and two cycle instructions write their results into the register file during this stage.
To learn more about pipeline implementation refer to :
https://brainly.com/question/10854404
#SPJ4
write a function that takes a list of strings as an argument and returns a filtered list containing the same elements but with the 'geese' removed. the geese are any strings in the following array, which is pre-populated in your solution: c
Below is the function that takes a string list as an argument and returns a filtered list with the same elements but without the "geese" The goose are any strings in the pre-populated array below.
Coding Part:
geese = ["Pilgrim", "Steinbacher", "Toulouse", "African", "Roman Tufted"]
def goose_filter(birds):
result = [];
for bird in birds:
if bird not in geese:
result.append(bird);
return result;
What is Array?
An array is a collection of elements of the same type that are stored in contiguous memory locations and can be accessed individually by using an index to a unique identifier.
An array of five int values can be declared without having to declare five different variables (each with its own identifier).
To learn more about Array, visit: https://brainly.com/question/28565733
#SPJ4
there is a gap in internet access based on demographics such as income, age, and race. what term best describes this?
A digital divide is a term for the gap in internet access based on demographics such as income, age, and race.
What gaps in the digital divide exist?The term "digital divide" refers to the difference in access to low-cost, dependable internet service (as well as the knowledge and tools required to use that access) between those who have it and those who don't.
Therefore, The term "digital divide" describes the difference in demographics and geographic areas with and without access to contemporary information and communications technology (ICT). The internet, personal computers, television, and telephone are examples of this technology.
Learn more about digital divide from
https://brainly.com/question/7478471
#SPJ1
brad, a student in his final semester, is planning to start his job search soon. in order to find the right job, brad should start thinking like a networker. his first step in building a network should be to start with
His classmates should be the first people he contacts while establishing a network.
How do networks work?
Two or more computers connected together to share resources (such printers and CDs), exchange files, or enable electronic communications make up a network. A network's connections to its computers can be made by cables, phone lines, radio signals, satellites, or infrared laser beams. Computers, servers, mainframes, network equipment, peripherals, and other linked devices form a network that enables data sharing. The Net, which links millions around the world, is an illustration of a network
To know more about Network
https://brainly.com/question/13102717
#SPJ4
you work in the it department. to perform your daily tasks, you often use many of the available windows consoles, such as device manager, hyper-v manager, and performance monitor. although each of these can be accessed from various locations in windows, you want one location from which these common tools can be accessed. which of the following system utilities best provides this capability?
MMC offers a configuration and system monitoring interface for system administrators and advanced users. It was first introduced in 1998.
What is MMC ?System administrators and expert users can configure and monitor the system using the Microsoft Management Console, a feature of Microsoft Windows. It debuted in 1998 as part of the Option Pack for Windows NT 4.0 and later came pre-bundled with Windows 2000 and its offspring.Snap-ins are Component Object Model components that can be hosted by the management console. Microsoft implements its administration tools mostly as MMC snap-ins. Using the application programming interfaces for the MMC that are available on the website of the Microsoft Developer Network, third parties can also create their own snap-ins.Computer Management can even be directed at a different Windows machine entirely, enabling the user to manage and monitor other accessible PCs on the local network.To learn more about MMC refer :
https://brainly.com/question/15023318
#SPJ4
g your friend wants to get a college degree that requires him to take a number of courses. some courses have prerequisites and must be taken strictly after these prerequisites have been passed. help your friend create a schedule that allows him to finish all courses in the shortest available timeframe. the courses codes are a, b, c, d, e, f, g, h and the requirements are as follows:
For students to graduate from a bachelor's program, they normally require at least 120 credits. Passing coursework for your major and additional courses your school might require will get you credits.
When enrolled full-time, college degrees typically take between four and five years to complete, though this can vary depending on the program you choose and the number of classes you take each year.
Depending on the types of courses you prioritize in your studies, several areas that include parts of science and liberal arts, such as psychology, economics, or political science, can be either a BA or a BS.
Both on-campus and online degrees provide strong incentives for students to enroll. Here are some things to think about while determining which option could be better for you.
To know more about program click here:
https://brainly.com/question/14368396
#SPJ4
which type of relationship is depicted between student and school? public class student { private string name; } public class school { student s; }
The composition includes the Has-a connection. In our software, the Has-a relationship is employed to implement any reused code.
What is software?Software is defined as a group of guidelines, facts, or software used to run machines and carry out particular activities. Software is the collective name for all of the programs, directives, and operations that make up a computer system.
Composition is a fundamental concept in object-oriented programming. It designates a class that can refer to one or more objects from other classes using instance variables. You can represent a has-a association between items with this.
Thus, the composition includes the Has-a connection. In our software, the Has-a relationship is employed to implement any reused code.
To learn more about software, refer to the link below:
https://brainly.com/question/985406
#SPJ1
At the beginning of a pandemic, a company has realized that they do not have enough Windows computers to ship out to employees in order to allow them to work from home. Which of the following might the company choose to implement to allow their users to continue to work from home until more computers can be purchased and shipped out to these employees?
a. TFP b. SSH c. VPN d. remote desktop gatewa
You decide to use the avg function to find the average total, and use the as command to store the result in a new column called average total.
What is invoice?Fourth is the sum of sum of the invoice totals for each vendor represented as VendorTotal, Fifth is the count of invoices for each vendor represented as VendorCount, Sixth is the average of the invoice totals for each vendor represented as VendorAvg.
The result set should include the individual invoices for each vendor is the reason why we use VendorID in the query.u are working with a database table that contains invoice data. the table includes columns for billing state, billing country, and total. you want to know the average total price for the invoices billed to the state of wisconsin.
Therefore, You decide to use the avg function to find the average total, and use the as command to store the result in a new column called average total.
Learn more about database table on:
https://brainly.com/question/22536427
#SPJ1
write a program that reads the student information from a tab separated values (tsv) file. the program then creates a text file that records the course grades of the students. each row of the tsv file contains the last name, first name, midterm1 score, midterm2 score, and the final score of a student. a sample of the student information is provided in studentinfo.tsv. assume the number of students is at least 1 and at most 20. assume also the last names and first names do not contain whitespaces.
I've worked on questions like this with additional tasks like the following:
Read the file name of the tsv file from the user.
Open the tsv file and read the student information.
Compute the average exam score of each student.
Assign a letter grade to each student based on the average exam score in the following scale:
A: 90 =< x
B: 80 =< x < 90
C: 70 =< x < 80
D: 60 =< x < 70
F: x < 60
Compute the average of each exam.
Output the last names, first names, exam scores, and letter grades of the students into a text file named report.txt. Output one student per row and separate the values with a tab character.
Output the average of each exam, with two digits after the decimal point, at the end of report.txt. Hint: Use the format specification to set the precision of the output.
This is the
code
i wrote in answer to that question:
You can adapt the code that I wrote to suit your following task. Sorry for only inputting images, hope it works.
Learn more about C++: https://brainly.com/question/20339175
#SPJ4
the command vid.canplaytype is useful when trying to determine what video formats are supported by a browser. true false
The statement is true. The precise formatting of a style is determined by the selector of a Cascading Style Sheets (CSS) rule.
When one wants to establish styles for a single webpage that are distinct from the rest of the webpage, one uses an external style sheet. the sailor. JavaScript's userAgent command gives us access to details about the browser that the page is being shown on. Rel and href are the two attributes used by the link element. When determining if a document is connected to a style sheet, the rel attribute uses the stylesheet value. True or False: The href property value indicates the CSS file's file location or name. The browser interprets CSS style rules, which are subsequently applied to the associated elements in your page.
Learn more about browser here-
https://brainly.com/question/28504444
#SPJ4
Using the Date and Time dialog box, add an automatic date stamp to the header of the document.
Use the July 5, 2019 format, The time X it takes Professor Sawyer to drive to campus on a randomly selected day follows a distribution that is approximately Normal with mean 37 minutes and standard deviation 3 minutes. After parking his car it takes an additional 3 minutes to walk to his classroom and 2 minutes to start the computer. Then he is ready to begin class. Let T = the total time it takes Professor Sawyer to get to his classroom and be ready to begin class. Describe the shape, center, and variability of the probability distribution of T.
The probability distribution of T is described as follows:
Shape: normal.Center: mean of 42 minutes.Variability: standard deviation of 3 minutes.What happens to the distribution with the addition of the measure of 5?The shape of the distribution remains constant, hence it will remain normal.
Then we have to consider that the mean of a data-set is the sum of all observations divided by the number of observations. Each day, a measure of 5 minutes is added to the distribution, hence 5 is added to the mean of the distribution also.
The standard deviation of a distribution is the square root of the sum of the differences squared of each observation and the mean. As the mean is added by 5, as are each observations, the sum of the differences remains constant, hence the standard deviation also remains constant at 3.
More can be learned about probability distributions at https://brainly.com/question/28450969
#SPJ1
an attacker masquerades as a support technician in order to replace keyboards with key logging keyboards. what technique are they employing?
If an attacker masquerades as a support technician in order to replace keyboards with key logging keyboards, the technique that they are employing is: b. Social engineering.
What is social engineering?Social engineering can be defined as an art of manipulating unsuspecting people (individuals) by a hacker or an attacker, especially the vulnerable in order to make them divulge confidential information or performing actions that compromises their security.
In Computer technology, some examples of social engineering attacks include the following:
Water-holingPretextingPhishingQuid pro quoTailgatingVishingSpear phishingBaitingIn Cyber security, social engineering simply refers to a technique that involves an a hacker or an attacker masquerading as a support technician so as to gather sensiitive user information.
Read more on social engineering here: brainly.com/question/27505805
#SPJ1
Complete Question:
An attacker masquerades as a support technician in order to replace keyboards with key logging keyboards. What technique are they employing? a. SCADA b. Social engineering c. rootkit d. MILS
