Answer:
false
Explanation:
it stronger the program code and it has good use for the manageable unitwhich is the default port of ip-winbox
The MikroTik RouterOS Winbox tool's default port is 8291. It is a TCP port used to access MikroTik Router devices remotely for management. It is used to remotely manage and configure the router from any computer with an internet connection.
A remote administration tool for setting up and controlling MikroTik Router devices is the MikroTik RouterOS Winbox programme. It is intended to enable users to access a MikroTik device from any internet-connected computer. Users can remotely control and manage their MikroTik devices using the safe and graphical Winbox interface. The remote administration port for MikroTik Router devices is TCP port 8291, which is the default port for Winbox. All correspondence between the client and the MikroTik device takes place over this port. The fact that this port is utilised for all communication, not simply access to the Winbox utility, should be noted. Opening this port is necessary to manage the MikroTik device from a distance.
Learn more about connection here-
brainly.com/question/14327370
#SPJ4
refer to the exhibit. which type of route does r1 use to reach host 10.10.13.10/32? a. default route b. network route c. host route d. floating static route
Hosting network route In order to get to host 10.10.13.10/32, R1 employs a host route, which is a route that specifically specifies the destination host address.
R1 connects to host 10.10.13.10/32 using a host route. A route that has been designed particularly to direct traffic to a particular host is known as a host route. When only one host address needs to be contacted, this kind of route is utilized. In this instance, the host address for the destination is 10.10.13.10/32. A network route, which is used to transport traffic to a variety of host addresses inside a subnet, is not the same as this kind of route. Another distinction between it and a default route is that the latter is used to transport traffic to any destination address that is not listed in the routing database. As a last distinction, it differs from a floating static route, which is used to specify a backup route in case.
Learn more about network here:
brainly.com/question/29970297
#SPJ4
exercise 5. consider the figure below. suppose that each link between the server and the client has a packet loss probability p, and the packet loss probabilities for these links are independent. what is the probability that a packet (sent by the server) is successfully received by the receiver? if a packet is lost in the path from the server to the client, then the server will re-transmit the packet. on average, how many times will the server re-transmit the packet in order for the client to successfully receive the packet?
The incidence of packet drops by the switch is reflected by the packet loss probability.
How can packet loss be repaired?
Even with a fast internet connection, packet loss can still arise. Switching from Wi-Fi to ethernet, changing ethernet ports, and power cycling your router are all basic troubleshooting procedures. You can also access the router's settings to activate Quality of Service (QoS) settings or update the firmware.
How many times will the server have to resend the packet for the client to receive it successfully?
Packet loss likelihood between the server and the client =p
Probability that p1's receiver will successfully receive the packet.
The likelihood that the server's packet is properly received by the client is 1/p1.
If the packet that the server retransmitted is received, the likelihood of successful transmissions is reduced to -1.
Consequently, the odds that the client will receive the packet that the server retransmits is 1/p1-1.
To know more about packet loss probabilities visit:
https://brainly.com/question/14748638
#SPJ4
in a client/server connection using http over tcp, if multiple objects are sent over the same tcp connection, then the connection is classified as
In a persistent HTTP connection, several items can be exchanged back and forth between the client and server across a TCP connection. Explanation: In order to send many objects over a single TCP connection, persistent connection are stayed active after a transaction is complete.
What is the TCP protocol?A crucial part of the Internet protocol set is the Transmission Control Protocol.
It developed out of the first network deployment, where it added to the Internet Protocol.
The full suite is hence referred to as TCP/IP.
A network protocol called TCP outlines how to start and maintain a conversation over the network so that programs can exchange data.
The Internet Protocol (IP), which specifies how computers communicate with one another, interacts with TCP.
TCP/IP is the name for a collection of data transmission protocols. The Transmission Control Protocol (TCP) and the Internet Protocol (IP) are two of the suite's protocols (IP).
To learn more about TCP Protocol refer to:
brainly.com/question/14280351
#SPJ4
how to submitteh final project workingwith dates in python programming essentials
Submit your final project by creating a .py file for your code and a .txt file for answers to questions. Ensure the files are named correctly and follow the submission guidelines.
To submit your final project, you will need to create two files: a .py file that contains your code and a .txt file that contains your answers to the questions. The .py file should contain all the code you wrote related to the project, while the .txt file should include your answers to the questions. Once you have both files, you should make sure they are named correctly according to the submission guidelines. This includes including your name, the project name and number in the file names. Once you have finished this, you can submit the files to the appropriate place. If the instructions specify a certain method of submitting the files, make sure to follow it. If not, you can usually submit the files through an online submission system.
Learn more about code here:
https://brainly.com/question/25774782
#SPJ4
atrue or false When remote, a 3cx mobile app only needs to have the tunnel port (default udp/tcp:5090) forwarded/nated on your firewall.
The default UDP / TCP:5090 tunnel port must be forwarded / NATed to the firewall in order for the 3CX app to work. The TCP and UDP tunnel ports (the default is 5090) should be routed to the PBX, and there will only be one firewall setup to take into account.
It is necessary to enable tcp/udp port 5060/5061 for VoIP providers and physical IP phones, tcp/udp port 5090 for apps, and tcp 443 for Windows apps for the 3CX server. In a multi-tenant cloud system, depending on which tenant you are, the tunnel port on a single instal of 3cx will vary from 5090 to another port. On a server with several , for instance, Instance 9 will automatically use tunnel port 13090. Here is a complete list of ports and the that go with them. For processing requests to open websites, port 80 should be open, and port 21 should be open for file sharing across a network. Use port 25565 if you're setting up a server. Pick a port forwarding protocol after that.
To learn more about PBX app click the link below:
brainly.com/question/15689940
#SPJ4
what is an appropriate way to visualize a list of the eye colors of 120 people? select all that apply. a) Pie chart. b) Box plot c) Dot plot
The correct answer is b) Box plot is an appropriate way to visualize a list of the eye colors of 120 people.
A box and whisker plot, often known as a box plot, shows a data set's five-number summary. The minimum, first quartile, median, third quartile, and maximum make up the five-number summary. A box is drawn from the first quartile to the third quartile in a box plot. At the median, a vertical line passes through the box. When displaying the distribution of data points over a chosen metric, box and whisker plots, sometimes referred to as box plots, are a fantastic graphic to utilise. These graphs show the ranges of the measured variables. Outliers, the median, the mean, and where the majority of the data points fall inside the "box" are all included in this.
To learn more about Box plot click the link below:
brainly.com/question/1523909
#SPJ4
What is the functionality of data encapsulation? [Choose all that apply]
A. Adds headers to the data that is sent across the network
B. Converts electrical pulses to binary data
C. Ensures security and reliability of data transmission
D. Assigns a MAC address to a host
Data encapsulation is a key feature of object-oriented programming. It ensures security and reliability of data transmission. It does not directly handle adding headers to data or converting electrical pulses to binary data.
Explanation:Data encapsulation is a key feature of object-oriented programming where data and methods are bundled together within a class. It provides several benefits, including:
Ensuring security and reliability of data transmission: Encapsulating data hides the internal implementation details from other parts of the program, reducing the risk of data corruption or unauthorized access.Adding headers to the data that is sent across the network: This functionality is more related to communication protocols and network layers rather than data encapsulation specifically.Converting electrical pulses to binary data: This functionality is performed by the physical layer of the network stack, not by data encapsulation.Learn more about Data encapsulation here:https://brainly.com/question/31665304
#SPJ11
what types of authentication are supported in junos for ospf?
Local password authentication, LDAP over TLS LDAPS, RADIUS, and TACACS are the four user authentication techniques that are supported by Junos OS.
Through the usage of the OSPF MD5 Authentication security protocol as defined by RFC 2328, the Communications Server OSPF (Open Shortest Path First) dynamic routing protocol allows message authentication and message integrity of OSPF routing messages. A shared key is used by OSPF authentication, a security feature, to authenticate OSPF packets. A network's OSPF routers are all setup with the shared key, which is used to confirm the legitimacy of OSPF packets. Between two OSPF routers, every packet is verified against the shared key.
Learn more about protocol here-
https://brainly.com/question/13327017
#SPJ4
a program design tool used to list the attributes and methods of objects within an object-oriented program is called .
A program design tool used to list the attributes and methods of objects within an object-oriented program is called a UML (Unified Modeling Language) class diagram.
In a UML class diagram, classes are represented as boxes with the class name at the top, followed by the attributes in the middle and the methods at the bottom. Attributes are depicted as variables and are listed within the class with their respective data types. Methods, on the other hand, are depicted as operations and are listed below the attributes. It is a type of static structure diagram that provides a graphical representation of the classes, interfaces, objects, and their relationships and structures in an object-oriented system.
Class diagrams can be used to depict the structure of an object-oriented system, its classes and their relationships. It can also be used to represent the relationship between objects, such as inheritance and association. Inheritance is represented by a solid line with an arrow pointing to the superclass, while association is represented by a solid line connecting the two classes.
UML class diagrams provide a visual representation of the objects and their relationships, making it easier for developers to understand the structure of the system. It also helps in identifying potential design problems early in the development process, reducing the need for costly and time-consuming changes later on.
To know more about program design tool: https://brainly.com/question/30320114
#SPJ4
when developing and implementing a written prcs program ____ must have a chance
There are many guidelines for entering a confined place, but checking and monitoring the atmosphere before entering may be the most important one of them all.
Which two precautions must be taken to regulate admission into an enclosed space?Before entering, the area must be adequately ventilated. To ensure that air containing adequate oxygen to sustain life is delivered, enough time should be given to set up a ventilation system. You can use blowers to mechanically or naturally ventilate a space.
What must those with permission enter a permit space wearing?Authorized entrants who enter a permit space are required to wear a retrieval line attached to the center of their backs at or above shoulder level or on a chest or full body harness.
To learn more about Authorized entrants here:
https://brainly.com/question/30098031
#SPJ4
Simulate the 2-input XOR gate using the University Waveform VWF and QSIM In the next step, we want to test if the digital logic circuit works the way it is intended. To be able to do this, we have to let the software check for errors first. To do that, click on the blue triangle next to "Analysis and Synthesis". Make sure that your Top-level file matched the name of your schematic design file. Task 0-2: Simulate the 2-input XOR gate using the University Waveform VWF and QSIM nclude a picture of your Quartus simulation (timing diagram) here Please answer the following questions 1. 2. 3. How do you expect the output of a 2-input XOR gate to behave? What tests did you perform to verify your logic circuit? Did the circuit behave as expected? If no, what was wrong?
Only when exactly one of an XOR gate's inputs is true is the output true. If both inputs are "true," the output is "true," otherwise, it is "false."
The output of an XOR gate is false if either one of its inputs is true or if both of its inputs are false. An XOR gate's functionality is dependent on how it is implemented if it has more than two inputs. The logical "either/or" is equivalent to how the XOR (exclusive-OR) gate operates. If any of the inputs is "true," but not both, then the output is "true." If both inputs are "true," the output is "true," otherwise, it is "false."
Learn more about output here-
https://brainly.com/question/18133242
#SPJ4
5. Which of the following job duties would a software developer perform? (1 point) O developing a product that is easy to use and meets a customer's need O establishing security procedures to protect important information managing and securing data O writing the code to make a new application work
Answer:
Writing the code to make new application work
Explanation:
the central processing unit is primarily responsible for ? group of answer choices performing program control and data processing ensuring data persists when electrical power is turned off interconnecting computers that are separated by distance enabling a human user to interact with the computer next
The Central Processing Unit (CPU) is the primary component of a computer responsible for performing program control and data processing. It is sometimes referred to as the "brain" of the computer because it performs the majority of the computational work.
The CPU retrieves instructions from memory, decodes them, performs arithmetic and logic operations on data, and stores the results back in memory. The CPU also controls the flow of information between other components in the computer, such as memory, input/output devices, and storage. The speed and efficiency of the CPU determine how quickly a computer can perform tasks, and its performance is a key factor in the overall performance of a computer system.
Learn more about CPU: https://brainly.com/question/16254036
#SPJ4
briefly explain why it is important to define a dreamweaver site file.
It is critical to define an indesign web file since doing so allows you to transfer your computer's data to the cloud services server, change or modify files inside your site, and build linkages between Web pages.
What purpose does Dreamweaver serve?Using the help of software that recognizes HTML, CSS, JavaScript, and other languages, you may create websites with Adobe Dreamweaver nearly everywhere. From amateurs to seasoned experts, Dreamweaver is helpful for a range of site designers.
What does the name Dreamweaver mean?These developers used Lynch's 19 Dreams paper as a guide, and by 1997 they had succeeded in creating software that truly addressed all nineteen. They dubbed the editor Dreamweaver after being prompted more by list that had brought it about.
To know more about Dreamweaver visit:
https://brainly.com/question/30353793
#SPJ4
what is the best way for jeff to start implementing windows 10 for buddy's machine shop?
Building a customized version of the new Windows operating system that has all the new drivers and software would be the optimal answer.
Process implementation is a strategic way to help a business adopt new procedures. For a variety of reasons, including task simplification, increased productivity, error reduction, or business expansion, businesses introduce new procedures. A project implementation plan is a written document that describes how a project will be carried out. The project's strategic goals and steps are outlined in the implementation plan, together with the project's timeline and the resources (such as team members) needed to complete the project successfully.
Learn more about system here-
https://brainly.com/question/14253652
#SPJ4
help
What is TRUE about a person’s values?
A.
They are not influenced by parents.
B.
They help people make decisions.
C.
They are the same thing as beliefs.
D.
They stay the same as people age.
B. They help people make decisions.
What is TRUE about a person’s values?Values are an important part of a person's life, as they are a set of guiding principles that help individuals make decisions about their behavior and what is important to them.Values are deeply personal and often influence decisions in both small and large ways. They are usually formed from a combination of influences from family, friends, culture, and personal experiences.While values are often passed down from generation to generation, they can also be shaped and adapted as a person matures and experiences different things throughout their life.Values can also differ greatly between individuals and even change over time. It is important to remember that values are never right or wrong, and they are not the same as beliefs. They are simply a reflection of someone's personal morality and what they believe to be important.To learn more about descriptive essay refer to:
https://brainly.com/question/988168
#SPJ1
which sequence of headers appears in a packet encapsulated with the tcp/ip stack?
The IP addresses of the sender and receiving hosts, as well as the datagram length and sequence order, are all included in the IP header.
Each data packet is enclosed by TCP in a header that has 10 required fields totaling 20 bytes (or octets). Each header contains details about the connection and the data being sent at the time. Here are the 10 TCP header fields: Source port: The port on the sending machine. The port of the object being received is the destination port. The first byte of data in the transmitted TCP packet is the sequence number (also called a TCP segment). The sequence number of the subsequent byte that the receiver anticipates receiving is the acknowledgement number.
Learn more about header here-
https://brainly.com/question/27057594
#SPJ4
which of the following is typically found in the database metadata? employee names (e.g. joe, bob, lisa) data types (e.g. integer, date, character) student grades (e.g. a, a-, b ) product prices (e.g. $10, $15, $20)
Following data types (e.g., integer, date, character) are commonly found in database metadata.
Which of the following is NOT a database system component?A database has five major components: hardware, software, data, procedures, and database access language. The database administrator is in charge of managing both the primary (database) and secondary (DBMS and related software) (DBA). The schema defines the database's structure.
What do ER diagram metadata depict?Relationships are frequently depicted graphically in a data model using what is known as a "entity-relationship diagram," or ERD. An ERD depicts the entities, relationships, and cardinality of a data model using shapes and lines.
To know more about database metadata visit :-
https://brainly.com/question/29910813
#SPJ4
the dimension of authorization that ensures that different users/entities do not access other users'/entities' data
Vertical authorization is the aspect of permission that prevents distinct users or entities from accessing the data of other users or entities.
If the user-controlled key is actually a flag that denotes administrator status, the attacker may be able to escalate their privileges vertically and achieve administrative access.
Vertical Authorization Bypass: Accessing or carrying out tasks that are not meant for the user who is signed in but have greater privileges. For instance: A web application's admin pages are accessible to an attacker with standard user privileges. After logging in as a regular user, you may visit the admin page directly to accomplish this.
By limiting access to protected resources to only authorised users or processes, authentication helps companies maintain the security of their networks. Computer systems, networks, databases, webpages, and other network-based software or services may be included in this.
Learn more about Vertical authorization here:
https://brainly.com/question/30457005
#SPJ4
Get a count of all the IP addresses in the 'ip.src' field and the 'ip.dst' field, and then find the IP address which appears the least. Provide the IP address, not the counts.
In Windows, enter the ipconfig command and hit Return. The command will provide you further details.
The IP addresses of the devices connected to your network should now appear in a rudimentary list on your screen. It's important to keep in mind that the overall number of IPv4 addresses is considerably lower than the total number of IPv6 addresses, at 4,294,967,296. For human purposes, we commonly express IP addresses as four octets because they are 32-bit integers. By converting both to their 32-bit integer representations and deducting, you may get the total number of addresses in a range. In reality, there is no difference between a private and public IP address; both would allow 62 hosts to be assigned to a /24 subnet.
Learn more about network here-
https://brainly.com/question/14276789
#SPJ4
when setting up ous in a new domain, why might it be useful to put all computers in one ou and all users in another?
- It will be easier to inventory computers in the domain.
- It will help organize users into user groups.
- An OU must contain either users or computers, but not both.
- Policies generally apply to either computers or users.
When setting up OUs in a new domain, it is useful to put all computers in one OU and all users in another because Policies generally apply to either computers or users.
Which of the following user accounts is automatically established and by default disabled?visitor account. A default local account called Guest is disabled by default and has restricted access to the machine. The Guest account password is always empty by default. The Guest account can be accessed without the need for a password by using a blank one.
When Windows Server is installed, which of the following user accounts is automatically generated and is by default disabled?The default Administrator account is disabled during Windows setup, and a new local account that belongs to the Administrators group is created instead. Apps with elevated permissions can be run by members of the Administrators groups without utilizing the Run as Administrator option.
What piece of hardware is required to install BitLocker?A Trusted Platform Module is a piece of hardware that is utilized with BitLocker (TPM). The TPM is a smartcard-like motherboard module that the makers of many more recent computers have installed. The TPM houses BitLocker's recovery key (version 1.2 or higher).
To know more about computers visit:
https://brainly.com/question/14847993
#SPJ4
You develop an SAPUI5 app and implement a FacetFilter. What events are triggered when the user interacts with the FacetFilter control? A. oninit
B. listFilter
C. reset
D. confirm
The correct answer is D. confirm are triggered when the user interacts with the FacetFilter control.
When a user clicks the Reset button on the toolbar or summary bar, the reset event is triggered. The FacetFilter control's showReset attribute allows you to hide the Reset icon so that it isn't visible. The reset logic must be implemented by the application. Research, Scoping, Synthesis, and Ideation in 360° Scoping, 360-degree research, and idea Scope, comprehensive research, and synthesis. Instead of the HTML page, they happen as a result of any interaction with the browser window. We connect the event listener for these events to the window object rather than the document object.
To learn more about confirm click the link below:
brainly.com/question/29706637
#SPJ4
Construct a DFA that recognizes the following language of strings over the alphabet {0,1}:
For a string x over the alphabet Σ, let #(a, x) be the number of times a substring $aa$ occurs in the string x. Different aa strings are allowed to overlap. For example, #(0, 00111001) = #(1, 00111001) = 2. (α) Definition: L = {x | #(0, y) ≤ #(1, y) for all prefixes y of x}. (b) Definition: L' = L ∩ {x | #(1, y) ≤ #(0, y) + 1 for all prefixes y of x}. Construct a finite automaton for the language (a) or (b) above, whichever is regular
To put it another way, a string is accepted by a DFA if and only if the DFA, starting at the initial state, ends in an accepting state after reading the string. If and only if L = w | *(q0, w) A, a DFA Q,, q0,, A > will accept a language L.
The language should be (0 + 1)*01 since DFA accepts all strings with the character "01" as their end. As a result, 1, 0 * 0, 0 1 is the right response. Option 1: Including "01" at the end. For example, "01,001,101,0001,0101,1001,1101,... Deterministic finite automata, or DFA, are used. Deterministic describes how the calculation was unique. If a machine reads an input string one symbol at a time, the finite automata are deterministic FA. There is only one path input from the DFAs.
Learn more about language
https://brainly.com/question/25619594
#SPJ4
an employee informs the help desk the laptop they are using cannot update the login credentials when they plug it in to the company's wired network. wireless connectivity is fine, but the login credentials cannot be updated using wi-fi. what is a possible action the help desk could take to troubleshoot the problem?
The possible action the help desk could take to troubleshoot the problem is to ping the loopback address.
What is troubleshooting?A methodical method of problem-solving is troubleshooting. The purpose of troubleshooting is to identify the root cause of an issue and provide instructions on how to fix it.
To confirm network connectivity, use Ping. To check that the networking protocols are installed and functioning properly on the laptop, ping the loopback IP (127.0.0.1).
It cannot be used to test the network port on a laptop because it does not transfer any data.
Therefore, pinging the loopback address is one possible step the support desk could take to solve the issue.
To learn more about troubleshooting, refer to the link:
https://brainly.com/question/30048504
#SPJ1
identify some of the differences between the gsm architecture and the lte architecture. what is the impact of these changes on wireless networks?
Unlike LTE, which is based on packet switching, GSM is based on circuit switching.
What effect will these modifications have on wireless networks?GSM architecture uses TDMA while LTE architecture uses OFDMA.The greatest data rate supported by GSM architecture is 14.4 Mbps, but the maximum data rate supported by LTE design is 300 Mbps.These modifications affect wireless networks in such a way as to boost data rate and capacity, enhance coverage and service quality, and improve power efficiency. Faster data transfer, better user experience, and cost savings for operators are all made possible by these innovations.The GSM architecture is based on 2G technology, which is voice-oriented. It makes use of circuit-switched technology, which creates a dedicated connection for the duration of a conversation between two users. The architecture is circuit-switched, so users are charged for the time they are connected.The LTE architecture was created using data-oriented 4G technologies. For data transfer, it uses packet-switched technology, which creates rapid, ad hoc connections. Users only pay for the data they consume thanks to the packet-switched architecture.The fact that LTE networks are far faster and more effective than GSM networks is the shift that will have the most effect. Higher data rates supported by LTE networks provide improved services like streaming video and video conferencing. Additionally, users of LTE networks can expect faster downloads, quicker response times, and better coverage. LTE networks are also more economical because consumers are only charged for the data they actually use, not for the time they are connected. Because of this, LTE networks are a desirable alternative for both individuals and companies.To learn more about Wireless Networks refer to:
https://brainly.com/question/26235345
#SPJ4
question 3 if you are setting up a new windows laptop with a 128gb hard drive and you want only a single file partition on the drive, which file systems can choose from?
If you want a single file partition on a 128GB Windows laptop, you can choose from the following file systems: NTFS, FAT32, and exFAT.
A file system determines how data is stored and organized on a storage device. When setting up a new Windows laptop with a 128GB hard drive and only a single partition, you have the option to choose from three different file systems: NTFS, FAT32, and exFAT. Here is a brief overview of each:
NTFS (New Technology File System): This is the default file system for Windows and is commonly used for internal hard drives. NTFS offers improved security features, such as permissions and encryption, and supports larger file sizes and volumes compared to FAT32.
FAT32 (File Allocation Table 32-bit): This is an older file system that is compatible with a wider range of devices and operating systems, including older versions of Windows, Mac OS, and Linux. However, it has limitations on file size (4GB maximum) and does not support advanced security features.
exFAT (Extensible File Allocation Table): This file system was developed as a more modern alternative to FAT32, offering larger file size and volume support without the advanced security features of NTFS. It is commonly used for removable storage devices and is compatible with a wide range of operating systems, including Windows, Mac OS, and modern versions of Linux.
To know more about the Windows file system visit: https://brainly.com/question/15134775
#SPJ4
a user made some modifications on the advanced tab in internet explorer's internet options, and now she is having some problems. how do you restore the default internet properties settings with the least amount of effort?
If a user has made modifications to the advanced tab in Internet Explorer's internet options and is now having problems, the quickest and easiest way to restore the default Internet properties settings is as follows:
Open Internet Explorer.
Click on the "Settings" (gear) icon in the upper-right corner of the window.
Select "Internet Options" from the drop-down menu.
In the "Internet Options" window, click on the "Advanced" tab.
Scroll to the bottom of the "Advanced" tab.
Find the "Reset" button and click on it.
In the "Reset Internet Explorer Settings" window, select "Delete personal settings" and then click "Reset".
Internet Explorer will now restart and the default Internet properties settings will be restored.
The "Reset" feature in Internet Explorer will restore the default settings for Internet Explorer, including security and privacy settings, the homepage, and the advanced settings in the "Advanced" tab. This feature is particularly useful when the user is encountering issues that cannot be resolved through other means.
Note: This process will remove any customizations or saved passwords, so it is important to back up any important information before resetting Internet Explorer.
In conclusion, restoring the default Internet properties settings in Internet Explorer is a straightforward process that can be done by clicking on the "Reset" button in the "Advanced" tab. This feature is useful for resolving issues in Internet Explorer, but it is important to back up important information before using it.
To know more about Internet Explorer: https://brainly.com/question/11462982
#SPJ4
gigantic life insurance has thousands of desktop computers and has just completed a major security audit. one of the recommendations in the security audit was to implement a host-based firewall on all the workstations. explain how windows firewall could be used by gigantic life insurance and the method you would use to configure windows firewall on all the workstations.
Windows Firewall is an effective and easy to use tool for protecting the network of a company like Gigantic Life Insurance, which has thousands of desktop computers.
To configure Windows Firewall on all the workstations, you can use Group Policy. Group Policy can be used to configure Windows Firewall settings, such as allowing or denying specific applications and services, setting up rules for incoming and outgoing traffic, and creating custom rules for more complex scenarios.
This allows for a uniform configuration of the firewall for all the workstations, ensuring that the same level of security is applied across the network. Additionally, Group Policy can be used to configure the firewall to automatically update its rules when a new version of the firewall is released, ensuring that the security of the network remains up-to-date.
Learn more about Windows Firewall:
https://brainly.com/question/10431064
#SPJ4
the operating system sometimes is called the . a. underlying hardware b. ground floor c. platform d. background app
The operating system is a platform that allows applications to run on a computer. It provides the interface between hardware and software.
Option C. Platform
The Role of the Operating SystemThe operating system is the most important software that runs on a computer. It provides the interface between the underlying hardware and software applications, allowing the user to interact with the computer and run applications. It also manages the computer’s resources, such as memory, storage and processing power, ensuring that each application gets the resources it needs to run properly. Furthermore, it contains security features and tools that protect the computer from malicious software and other threats. In short, the operating system is the backbone of the computer, providing a platform for applications to run and users to interact.
Learn more about Software: https://brainly.com/question/16397886
#SPJ4
