Trundle wheels are used to measure distances along the ground.
The radius of the trundle wheel is 30 cm.
Jim wants to work out the distance between two junctions on a road.
He rolls the trundle wheel between the two junctions.
The trundle wheel rotates exactly 48 times.
Work out the distance between the two junctions.
Give your answer in metres correct to the nearest metre.

Answer:

  a) 10:30 a.m.

  b) 75 km/h

Step-by-step explanation:

You want to know the leaving time and speed of a car from Woodlands to Muar if it left half an hour later and arrived half an hour earlier than a coach that traveled the 150 km distance at a speed of 50 km/h and arrived at 1 p.m..

The travel time of the coach is found from the relation ...

  time = distance/speed

  time = (150 km)/(50 km/h) = (150/50) h = 3 h

Then the coach left Woodlands at ...

  1 pm -3 h = 10 am

The car left half an hour later than the coach, so left at 10:30 a.m..

The car arrived at Muar at 12:30 p.m. so had a travel time of ...

  12:30 -10:30 = 2 h

The speed over the 150 km distance is given by ...

  speed = distance/time

  speed = (150 km)/(2 h) = (150/2) km/h = 75 km/h

The average speed of the car was 75 km/h.

__

Additional comment

The car passed the coach at 11:30 a.m., when both had covered half the distance.

The correct answer is: D) distance traveled since leaving Bay Town; x ≥ 0

The equation y = -x + 175 represents the distance left to travel to Oak Glen.

In this equation, x is the distance traveled since leaving Bay Town, and y is the distance left to reach Oak Glen.

The domain represents the possible values of x, which is the distance traveled since leaving Bay Town.

Since distance traveled cannot be negative, the domain is x ≥ 0. Therefore, the correct answer is:

D) distance traveled since leaving Bay Town; x ≥ 0

Read more about domain and range here:

https://brainly.com/question/26098895

#SPJ1

The question in English is:

The distance between Bay Town and Oak Glen is 175 miles. If the equation y = -x +175 represents the distance to go to Oak Glen, what does the domain represent? What is the domain?

The shortest path from vertex A to vertex L is ACFIL. The total distance of the path is 27 units.

To find the shortest path from vertex A to vertex L, we can use Dijkstra's algorithm. We start by marking the distance of each vertex from A as infinite except for A, which is 0. Then, we choose the vertex with the smallest marked distance and update the distances of its neighbors. We repeat this process until we reach L.

In this case, we would start at A and update the distances of B and D to 2 and 19, respectively. We would then choose B and update the distances of C, F, and E to 11, 10, and 18, respectively.

Next, we would choose F and update the distances of I and L to 27 and 30, respectively. Finally, we would choose L and have found the shortest path from A to L: ACFIL with a total distance of 27.

To know more about vertex:

brainly.com/question/14815086

#SPJ1

The measure of the angle is 36.9^o. Option B.

A right triangle is a form or type of triangle in which the measure of one of its internal angles is 90^o. As such, either the trigonometric functions or Pythagorean theorem can be applied to determine any of its properties as the case may be.

From the details given in the question, we can deduced that;

Sin θ = 3/5

       = 0.6

So that,

θ = Sin^-1 0.6

  = 36.87

θ = 36.9^o

The measure of the angle is 36.9^o. Option B.

Learn more about right triangles at https://brainly.com/question/29869536

#SPJ1

Using the given matrix, the value of -10(T) is

[tex]-10(T) = \left[\begin{array}{cc}-230&380\\-170&60\end{array}\right][/tex]

From the question, we are to carry out the matrix multiplication

From the given information,

The given matrices is:

[tex]T =\left[\begin{array}{cc}23&-38\\17&-6\end{array}\right][/tex]

Now, we are to determine -10(T)

To achieve this, we will multiply each of the element in the given matrix by -10

That is,

-10 ×23 = -230

-10 × -38 = 380

-10 × 17 = -170

-10 × -6 = 60

Thus,

The result of the multiplication will be:

[tex]\left[\begin{array}{cc}-230&380\\-170&60\end{array}\right][/tex]

Hence, the value of -10(T) is

[tex]-10(T) = \left[\begin{array}{cc}-230&380\\-170&60\end{array}\right][/tex]

Learn more on Multiplication of matrices here: https://brainly.com/question/28869656

#SPJ1

Answer:

(A.)

Step-by-step explanation:

you just have to follow the order that there going in so when they say less than you use the less than sign

Answer:

Let the width of the rectangle be w. Then the length of the rectangle is 5w.

The perimeter of a rectangle is the sum of all four sides. So, the perimeter of the rectangle is 2w+2(5w)=108 cm.

Simplifying the right side of the equation, we get 12w=108 cm.

Dividing both sides of the equation by 12, we get w=9 cm.

Since the width is 9 cm, the length of the rectangle is 5w=5(9)=45 cm.

Therefore, the length of the rectangle is 45 cm and the width is 9 cm.

Thee radius of the circle is 3. 696 feet

The formula that is used for calculating or determining the circumference of a circle is expressed as;

C = 2πr

Given that the parameters for the formula are expressed thus;

From the information given, we have that;

Radius = 23.21 feet

Substitute the values, we get;

23.21 = 2× 3.14r

Multiply the values

r = 23.21/6.28

Divide the values

r = 3. 696 feet

Learn about circles at: https://brainly.com/question/24375372

#SPJ1

Answer: 2 hours 15 minutes

Step-by-step explanation:

To solve this problem, we need to use the formula:

distance = speed x time

First, let's calculate the distance Jaswat covered in the first 1 1/2 hours:

distance = speed x time

distance = 6 Km/h x 1.5 h

distance = 9 Km

So, Jaswat covered 9 Km in the first 1 1/2 hours. He still had to cover 12 Km - 9 Km = 3 Km.

Now, we need to calculate the time Jaswat took to cover the remaining 3 Km at a speed of 4 Km/h:

distance = speed x time

3 Km = 4 Km/h x time

time = 3 Km / 4 Km/h

time = 0.75 hours = 45 minutes

Therefore, Jaswat took 1 1/2 hours + 45 minutes = 2 hours 15 minutes to complete the journey.

Answer:1020 ft (squared)

Step-by-step explanation:

Base width 1 (28 ft) x Base width 2 (40 ft) x height (6 ft) = 1020 ft (squared)

To find the estimated amount John needs to save to buy the bike, we can subtract the amount he already has saved from the cost of the bike:

Estimated amount = Cost of bike - Amount already saved

Estimated amount = $337 - $103

Estimated amount = $234

Therefore, John needs to save an estimated $234 more to buy the bike.

Answer:

John needs to save about $234 more to buy the bike. Note that this is an estimate, as we do not know if John will need to pay any taxes or additional fees when purchasing the bike.

Step-by-step explanation:

To find out how much more John needs to save to buy the bike, we can subtract the amount he has already saved from the cost of the bike:

337 - 103 = 234

Therefore, John needs to save about $234 more to buy the bike. Note that this is an estimate, as we do not know if John will need to pay any taxes or additional fees when purchasing the bike.

x=15.4 units

First, some definitions before working the problem:

The three standard trigonometric functions, cosine, tangent, and sine, are defined as follows for right triangles:

[tex]sin(\theta)=\dfrac{opposite}{hypotenuse}[/tex]

[tex]cos(\theta)=\dfrac{adjacent}{hypotenuse}[/tex]

[tex]tan(\theta)=\dfrac{opposite}{adjacent}[/tex]

One memorization tactic is "Soh Cah Toa" where the first capital letter represents one of those three trigonometric functions, and the "o" "a" and "h" represent the "opposite" "adjacent" and "hypotenuse" respectively.

The triangle must be a right triangle, or there wouldn't be a "hypotenuse", because the hypotenuse is always across from the right angle.

Working the problem

For the given triangle, the right angle is at the bottom, so the side on top is the hypotenuse.  We know the angle in the upper right corner, so the side across from it with length 4.5, is the opposite side.

For this triangle, the "opposite" leg is known.  Additionally, the "hypotenuse" is unknown and is our "goal to find" side.

Therefore, the two sides of the triangle that are known or are a "goal to find" are the "opposite" & "hypotenuse".

Out of "Soh Cah Toa," the part that uses "o" & "h" is "Soh".  So, the desired function to use for this triangle is the Sine function.

[tex]sin(\theta)=\dfrac{opposite}{hypotenuse}[/tex]

[tex]sin(17^o)=\dfrac{4.5}{x}[/tex]

Multiply both sides by x, and divide both sides by sin(17°)...

[tex]x=\dfrac{4.5}{sin(17^o)}[/tex]

Make sure your calculator is set to degree mode, and calculate:

[tex]x=\dfrac{4.5}{0.2923717047227...}[/tex]

[tex]x=15.391366289249...[/tex] units

Rounded to the nearest tenth...

[tex]x=15.4[/tex] units

Answer:

i believe 67 its somewhat hard to tell but the line seems to be in the middle between 150 and 140

Step-by-step explanation:

since it heats up to 212 then the person lets it cool down for 10 mins the temp goes to 145 (Answer is 67)

The discussion for both cases is shown below.

Part a:

H0: there is no association between climate change and certainty.

H1: there is no association between climate change and certainty.

It seems that the null hypothesis (H0) and the alternative hypothesis (H1) are identical, which doesn't make sense. Typically, the null hypothesis states that there is no association or effect, while the alternative hypothesis states that there is an association or effect.

The statement also mentions that the p-value is a non-zero number, but it doesn't provide the actual value. The p-value is used to determine the statistical significance of the association and should be compared to a predetermined significance level (e.g., 0.05) to make a decision.

Part 2:

H0: there is no association between sleeping and the income class.

H1: there is a association between the income class and sleeping.

Similarly, the null hypothesis (H0) and the alternative hypothesis (H1) are stated incorrectly. The null hypothesis should state no association or effect, while the alternative hypothesis should state that there is an association or effect.

Again, the statement mentions a non-zero p-value but doesn't provide the actual value. The p-value needs to be compared to a significance level to determine the statistical significance of the association.

In both cases, it is important to provide the actual p-value and compare it to the significance level to make a proper conclusion about the association between the variables.

Learn more about Null Hypothesis here:

https://brainly.com/question/28920252

#SPJ1

Answer:

0.1

Step-by-step explanation:

P(red shirt, black pants | 1 shirt, 1 pants)

= P(red shirt | 1 shirt) * P(black pants | 1 pants)

= (1)/(2+2+1) * (1)/(2)

= 1/10

=0.1

The array that represents the total number of miles is X = 12

Given that;

Selena ran 4 miles per day

And she ran for 3 different days

Let the total miles she ran = X

therefore

X =  miles of 1st day  + miles of 2nd day  + miles of 3rd day

⇒ X = 4 + 4 + 4

⇒ X = 12 miles

Thus the symbolic form of miles Selena ran is,

X = 12.

To learn more about multiples visit:

https://brainly.com/question/11799672

#SPJ1

The equation x⁴/y = 7 represents a relationship of direct proportionality between x and y, where x⁴ and y are inversely proportional to each other.

The equation x⁴/y = 7 represents a relationship between the variables x and y. Specifically, it shows that the fourth power of x divided by y is equal to 7.

This equation can be rewritten as x⁴ = 7y, which means that if we know the value of y, we can determine the corresponding value of x that satisfies the equation. For example, if y = 1, then x⁴ = 7, and taking the fourth root of both sides of the equation gives us x = ± √7.

Conversely, if we know the value of x, we can solve for y by rearranging the equation as y = x⁴/7. This shows that y is directly proportional to x raised to the fourth power, meaning that as x increases, y will also increase, but at a faster rate due to the exponent of 4.

To learn more about equation click on,

https://brainly.com/question/4164028

#SPJ1

The resulting matrix from an elementary row operation to get a 1, in row 1 column 1 is:

R₁ = [1 4 -8] and R₂ = [2 4 7]

A rectangular array of numbers or mathematical objects which are arranged in rows and columns is called a matrix. Each row of a matrix is a horizontal sequence of numbers or objects that are separated by commas and enclosed within square brackets, and it represents a vector in the row space of the matrix.

The row operation R₁ - 4 — R₁ will be carried out as follows:

5 - 4 = 1 {row 1 column 1}

9 - 4 = 5 {row column 2}

-4 - 4 = -8 {row column 3}

Therefore, the resulting matrix from an elementary row operation to get a 1, in row 1 column 1 will have:

R₁ = [1 4 -8] and R₂ = [2 4 7]

Read more about matrix row here:https://brainly.com/question/1279486

#SPJ1

Answer:

x= 3 cm

Explanation:

I am bad at it

Answer:

15.04 (3.s.f)

Step-by-step explanation:

Cos a = adjacent/ hypotenuse

Cos 43 = 11/ x

so,

x= 11 / cos 43

= 15.04

Answer:

The graph should be increasing 2.25 each time

Step-by-step explanation:

Since Oscar buys his lunch in school cafeteria and the cost of 15 school lunches is 33.75

Divide them: 33.75 ÷ 15 =

and will represents the average cost of the lunches in dollar per lunch that is 2.25

Answer:

Step-by-step explanation:

first, take 1/2+1/3 + 1/4+2/3

1/2+1/3=5/6 , 1/4+2/3=11/12

5/6+11/12=22/12

2/5-4=-18/5

-18/5*5/6=-3

22/12/3=22*3/12

=11/2

11/2/3/7=11/2*7/3

=77/6=12.8

About 8.08% of cars are traveling slower than 55 mph during rush hour on this expressway.

Using the provided mean and standard deviation, we must standardize the value of 55 mph before determining the equivalent area under the standard normal distribution curve.

The standardized value, or z-score, is calculated as:

z = (x - μ) / σ

Where

Plugging in the values, we get:

z = (55 - 62) / 5 = -1.4

The area under the usual normal distribution curve to the left of z = -1.4 must now be determined. Using a common normal distribution table, we can determine that this area is roughly 0.0808.

Therefore, about 8.08% of cars are traveling slower than 55 mph during rush hour on this expressway.

Learn more about normal distribution here : brainly.com/question/27275125

#SPJ1

The preparation of the journal entry to record the sale and the settlement of the account receivable is as follows:

January 10, 2022:

Debit Accounts Receivable $16,600

Credit Sales Revenue $16,600

(To record the sale of merchandise on account to Robertsen Co, n/30.)

February 9, 2022:

Debit Notes Receivable $16,600

Credit Accounts Receivable $16,600

(To record the receipt of a 11% promissory note in settlement of account receivable.)

Journal entries refer to the initial records maintained about business transactions.

Journal entries show how the transactions will be posted in the general ledger.

January 10, 2022: Accounts Receivable $16,600 Sales Revenue $16,600

Terms n/30

February 9, 2022: Notes Receivable $16,600 Accounts Receivable $16,600

Learn more about journal entries at https://brainly.com/question/28390337.

#SPJ1

Prepare the journal entry to record the sale and the settlement of the account receivable.

Assuming the interest is compounded continuously what interest rate to the nearest hundredths of a percent would be required in order for Jamar to end up with $4200 is 4.62%.

Using the formula r = ln(A/P) / t, the interest rate, r, can be determined using an online finance calculator as follows:

Total P+I (A) = $4,200.00

Principal (P) = $2,200.00

Compound (n) = Compounding Continuously

Time (t in years) = 14 years

R = 4.619% per year

The calculation steps are as follows:

Solving for rate r as a decimal

r = ln(A/P) / t

r = ln(4,200.00/2,200.00) / 14

r = 0.0461877

Then convert r to R as a percentage:

R = r * 100

R = 0.0461877 * 100

R = 4.62%/year

Thus, the interest rate required to get a total amount of $4,200.00 from compound interest on a principal of $2,200.00 compounded continuously over 14 years is 4.62% per year.

Learn more about continuous compounding at https://brainly.com/question/14303868.

#SPJ1

Answer:

Step-by-step explanation:

To find the margin of error for a 98% confidence level, we need to use the z-score that corresponds to this confidence level, which is 2.33 (found in a z-table or using a calculator).

The formula for the margin of error (E) is:

E = z*(sqrt(p*q/n))

Where:

z is the z-score for the desired confidence level (2.33 for 98% confidence)

p is the sample proportion (0.4, or 40%)

q is the complement of the sample proportion (1 - 0.4 = 0.6)

n is the sample size (800)

Substituting these values into the formula, we get:

E = 2.33*(sqrt(0.4*0.6/800)) = 0.045

So the margin of error for a 98% confidence level, with a sample size of 800 and a sample proportion of 40%, is 0.045 or approximately 4.5%. This means that we can be 98% confident that the true population proportion is within 4.5% of the sample proportion.

The population proportion of items manufactured that are defective is estimated to be between 0.137 and 0.037 with a 95% confidence level.

The sample proportion, denoted as ^p, is the proportion of a certain characteristic or outcome in a sample. It is calculated by dividing the number of individuals in the sample that exhibit the characteristic or outcome of interest by the total number of individuals in the sample.

It is an estimate of the population proportion, denoted as p, which represents the proportion of the same characteristic or outcome in the entire population.

Here we have

The sample proportion (^) of defective items is not provided in the question.

Hence, let's assume that the sample proportion (^) of defective items is 0.05 (i.e., 5% as specified in the question).

The sample size is 50, and the sample proportion (^) is 0.05.

The question is asking for the population proportion of items manufactured that are defective (P).

Use the sample proportion (^) and the sample size to calculate the margin of error and construct a confidence interval.

Assuming a 95% confidence level, we can use the following formula to calculate the margin of error:

Margin of error = 1.96 × √(^×(1⁻^)/n)

Substituting the values, we get:

Margin of error = 1.96 × √(0.05 × (1 - 0.05)/50) = 0.087

To construct the confidence interval, we add and subtract the margin of error from the sample proportion:

Confidence interval = ^ ± margin of error

Confidence interval = 0.05 ± 0.087

Confidence interval = (0.137, 0.037)

Therefore,

The population proportion of items manufactured that are defective is estimated to be between 0.137 and 0.037 with a 95% confidence level.

Learn more about Sample Proportions at

https://brainly.com/question/29912751

#SPJ1

The addition of the vectors [tex]\vec a + \vec b[/tex] is (3, -5) and it has been represented by using the head to tail method in the graph below.

In Mathematics and Science, a vector can be defined as an element of a vector space, which represents an object that is composed of both magnitude and direction.

In Mathematics and Science, a vector typically comprises two (2) points. First, is the starting point which is commonly referred to as the "tail" and the second (ending) point that is commonly referred to the "head."

Generally speaking, the head to tail method of adding two (2) vectors involve drawing the first vector ([tex]\vec a[/tex]) on a cartesian coordinate and then placing the tail of the second vector ([tex]\vec b[/tex]) at the head of the first vector. Lastly, the resultant vector is then drawn from the tail of the first vector ([tex]\vec a[/tex]) to the head of the second vector ([tex]\vec b[/tex]).

By solving the given vectors algebraically, we have the following:

[tex]\vec a + \vec b[/tex] = (4, -3) + (-1, -2)

[tex]\vec a + \vec b[/tex] = [(4 + (-1)), (-3 + (-2))

[tex]\vec a + \vec b[/tex] = [(4 - 1), (-3 - 2)]

[tex]\vec a + \vec b[/tex] = (3, -5).

Read more on head to tail method and vector here: https://brainly.com/question/30135145

#SPJ1

For A∩B , shade the middle common part in the Venn diagram.

What is Venn diagram?

Using circles to represent relationships between objects or limited groupings of objects, a Venn diagram is one example. Circles that overlap share certain characteristics, whereas circles that do not overlap do not. Venn diagrams are useful for showing how two concepts are related and different visually.

Here the given Venn diagram contains two sets A and B.

The A intersection B or A∩B means , common elements in both A and B.

So we have shade the middle part of Venn Diagram.

To learn more about Venn Diagram refer the below link

https://brainly.com/question/28060706

#SPJ9

The cost of one T-shirt and one jacket is $12 and $13 respectively.

Let

cost of one t-shirt = x

cost of one jacket = y

8x + 3y = 135

7x + 5y = 149

Multiply (1) by 5 and (2) by 3

40x + 15y = 675

21x + 15y = 447

Subtract the equations to eliminate y

40x - 21x = 675 - 447

19x = 228

divide both sides by 19

x = 228/19

x = 12

Substitute x = 12 into (1)

8x + 3y = 135

8(12) + 3y = 135

96 + 3y = 135

3y = 135 - 96

3y = 39

y = 39/3

y = 13

Hence, a T-shirt and a Jacket cost $12 and $13 respectively.

Read more on simultaneous equation:

https://brainly.com/question/16863577

#SPJ1