If two m=4.6 g point charges on 1.0-m-long threads repel each other after being charged to q=110 ,the angle between the two point charges would be approximately 54 degrees.
When two point charges repel each other, the force of repulsion acts along the line connecting the charges. In the given scenario, the charges are suspended on 1.0-m-long threads, which implies that the threads are in tension and make a small angle with the vertical.
To find the angle, we can consider the triangle formed by the vertical, the threads, and the line connecting the charges. Since the angle is small, we can approximate the tangent of the angle as the ratio of the vertical displacement (1.0 m) to the horizontal displacement (the distance between the charges).
Using trigonometry, we can calculate the angle as arctan(1.0 m / (0.11 m + 0.11 m)) ≈ 54 degrees.
To know more about ,force of repulsion, click here https://brainly.com/question/30656894
#SPJ11
croquet ball a moving at 8.7 m/s makes a head on collision with ball b of equal mass and initially at rest. immediately after the collision ball b moves forward at 5.7 m/s .
What fraction of the initial kinetic energy is lost in the collision?
When a croquet ball A moving at 8.7 m/s makes a head-on collision with ball B of equal mass and initially at rest, immediately after the collision, ball B moves forward at 5.7 m/s. The fraction of the initial kinetic energy lost in the collision is 0.47 (approx).
The law of conservation of energy states that energy can neither be created nor destroyed; it can only be transformed or transferred from one form to another. The kinetic energy of the system before the collision equals the sum of the kinetic energy of ball A and the kinetic energy of ball B.
Therefore,K.E. before collision = 1/2 m (v1)²K.E. after collision = 1/2 m (v2)²where m is the mass of the balls, v1 is the velocity of ball A before collision, and v2 is the velocity of ball B after collision.
The fraction of initial kinetic energy lost in the collision is given by1 - (K.E. after collision/K.E. before collision)
The final velocities of ball A and ball B can be found using conservation of momentum, which states that the total momentum of an isolated system is constant before and after a collision.
m (v1) = m (v1)′ + m (v2)′The velocity of ball A after collision (v1)' is given byv1' = (m (v1) - m (v2)′) / m = v1 - v2′
Similarly, the velocity of ball B after collision (v2)' is given byv2′ = (m (v2) + m (v1) - m (v2)) / m = v1
The kinetic energy after the collision isK.E. after collision = 1/2 m (v1 - v2′)² = 1/2 m (v1 - (v1 - v2))² = 1/2 m (v2)²
The kinetic energy before the collision isK.E. before collision = 1/2 m (v1)²
Substituting the values of the velocities in the formulae for the kinetic energy before and after the collision,K.E.
before collision = 1/2 m (8.7 m/s)² = 38.2075 JandK.E. after collision = 1/2 m (5.7 m/s)² = 16.245 J
The fraction of the initial kinetic energy lost in the collision is1 - (K.E. after collision/K.E. before collision) = 1 - (16.245/38.2075) = 0.574or approximately 0.47.
Therefore, the fraction of initial kinetic energy lost in the collision is 0.47 (approx).
Learn more about kinetic energy
brainly.com/question/999862
#SPJ11
A hot piece of charcoal emits a thermal (continuous) radiation
spectrum. What is the peak wavelength if the temperature is 1.22e+3
K?
The peak wavelength of the thermal radiation spectrum emitted at a temperature of 1.22e+3 K is 2.37 micrometers.
A hot piece of charcoal emits a thermal (continuous) radiation spectrum.
To find out the peak wavelength if the temperature is 1.22e+3 K, we can use Wien's displacement law. According to Wien's displacement law, the peak wavelength λmax is inversely proportional to the temperature T. In mathematical terms, it can be written as:
λmax = b/T
where b is a constant known as Wien's displacement constant.
The value of Wien's displacement constant is 2.898 x 10⁻³ m K. Now we can substitute the given temperature into the formula to find the peak wavelength:
λmax = b/T
λmax = 2.898 x 10⁻³ m K / 1.22 x 10³ K
λmax = 2.37 x 10⁻⁶ m or 2.37 micrometers
Therefore, the peak wavelength of the thermal radiation spectrum emitted by a hot piece of charcoal at a temperature of 1.22e+3 K is 2.37 micrometers.
To know more about Wien's displacement law, refer to the link below:
https://brainly.com/question/28365925#
#SPJ11
How much does it cost to operate a 800 watts rice cooker for 30
minutes daily for 30 days at a rate 40 cents/kWh ?
4.90
$5.0
$4.8
$6
When an electron is transferred to a ne
The cost to operate a 800-watt rice cooker for 30 minutes daily for 30 days at a rate of 40 cents/kWh is $4.80.
To calculate the cost, we first need to determine the energy consumption of the rice cooker. The power consumption of 800 watts for 30 minutes daily for 30 days can be calculated as follows:
Energy consumption = Power × Time
= (800 watts) × (0.5 hours/day) × (30 days)
= 12,000 watt-hours or 12 kWh
Next, we can calculate the cost by multiplying the energy consumption by the rate:
Cost = Energy consumption × Rate
= 12 kWh × $0.40/kWh
= $4.80
Therefore, the cost to operate the rice cooker for the given duration and rate is $4.80.
To know more about watt, refer here:
https://brainly.com/question/20339652#
#SPJ11
An object of mass m attached to spring with constant k oscillates with amplitude Assuming air resistance and the mass of the spring to be negligible; which of the following changes alone would cause the period of this oscillation to increase? Increasing m Il; Increasing A III: Using spring with greater k Lonly Submit Il only Ior IIl only Il or IIl only V, Il or III
The only option II, increasing the mass, would increase the period of the oscillation.
The period of oscillation is defined as the time required for a single oscillation to occur. It is determined by the square root of the mass attached to the spring divided by the spring constant.
The formula for the period is:
T = 2π√m/k
Where T is the period, m is the mass, and k is the spring constant. Therefore, an increase in mass or a decrease in spring constant k would lead to an increase in the period of the oscillation. Only option II would result in an increase in the period of the oscillation.
The period of oscillation is a function of the mass of the object and the spring constant. If the mass is increased, the period of oscillation increases, and if the spring constant is increased, the period of oscillation decreases. It is also unaffected by the amplitude or air resistance. Thus, only option II, increasing the mass, would increase the period of the oscillation.
For more information on oscillation kindly visit to
https://brainly.com/question/31312208
#SPJ11
Which of the following statement is correct about the net electric charge of an isolated system. a. Both objects acquire a positive charge, hence, increasing the net charge of the system. b. Both objects acquire a negative charge, hence, decreasing the net charge of the system. c. Either of the two objects receives or loses equal number of electrons, hence, net charge of system remains the same. d. Either of the two objects receives or lose unequal number of electrons, hence, net charge of system remains the same.
The correct statement about the net electric charge of an isolated system is: Either of the two objects receives or loses an equal number of electrons, hence the net charge of the system remains the same. Option(c)
In an isolated system, the total electric charge is conserved, meaning that the net charge of the system remains constant. When two objects interact within the system, they can exchange electrons. However, according to the conservation of charge, the total amount of charge before and after the interaction must be the same.
Option (c) states that either of the two objects receives or loses an equal number of electrons, resulting in no change in the net charge of the system. This is consistent with the conservation of charge. If one object gains electrons, it becomes negatively charged, while the other object loses the same number of electrons and becomes positively charged, balancing out the net charge.
Therefore, option c accurately describes the behavior of the net electric charge in an isolated system.
To learn more about electric charge refer here:
https://brainly.com/question/9194793#
#SPJ11
What is the stopping distance of a car travelling at 28ms`¹ (100km/h=1.0 x10² km/h) if the reaction time of the driver is 0.50 seconds and then the driver applies the brakes with the car decelerating at a rate of 6.0ms?
The stopping distance of the car, considering a reaction time of 0.50 seconds and a deceleration rate of 6.0 m/s², is approximately 52 meters.
To calculate the stopping distance of the car, we need to consider two factors: the distance covered during the driver's reaction time and the distance covered while the car decelerates.
Distance during the reaction time:
The car is traveling at 28 m/s. In 0.50 seconds, the car will cover a distance equal to its initial velocity multiplied by the reaction time:
Distance = Velocity × Time
Distance = 28 m/s × 0.50 s
Distance = 14 meters
Distance during deceleration:
The car decelerates at a rate of 6.0 m/s². To calculate the distance covered during deceleration, we can use the following formula:
Distance = (Velocity² - Initial Velocity²) / (2 × Acceleration)
Where:
Velocity = Final velocity = 0 m/s (since the car stops)
Initial Velocity = 28 m/s
Acceleration = -6.0 m/s² (negative because the car is decelerating)
Plugging in the values, we get:
Distance = (0² - 28²) / (2 × -6.0)
Distance = (0 - 784) / (-12)
Distance = 784 / 12
Distance ≈ 65.33 meters
Total stopping distance:
To find the total stopping distance, we add the distance covered during the reaction time to the distance covered during deceleration:
Total Stopping Distance = Distance during Reaction Time + Distance during Deceleration
Total Stopping Distance = 14 meters + 65.33 meters
Total Stopping Distance ≈ 79.33 meters
Therefore, the stopping distance of the car, considering a reaction time of 0.50 seconds and a deceleration rate of 6.0 m/s², is approximately 79.33 meters.
For more such questions on distance, click on:
https://brainly.com/question/26550516
#SPJ8
how do the results recorded in photo 2 and photo 3 compare to the discussions of current through series and parallel circuits in the background?
In photo 2 and photo 3, the results are obtained from two different circuit configurations. In photo 2, a series circuit is depicted while in photo 3, a parallel circuit is shown. The results recorded in these two photos can be compared with the discussions of current through series and parallel circuits in the background.
As per Ohm’s law, the current through a conductor is directly proportional to the voltage applied to it and inversely proportional to the resistance. In a series circuit, the voltage is divided among the resistors in proportion to their resistance and hence the current through each resistor is the same. In contrast, in a parallel circuit, the voltage is the same across each resistor and hence the current through each resistor is inversely proportional to its resistance.
In photo 2, the series circuit is composed of three resistors. The total resistance of the circuit is the sum of the individual resistances.
From the Ohm’s law, we can calculate the total current of the circuit by dividing the total voltage by the total resistance. The current through each resistor can be calculated by using Ohm’s law.
In photo 3, the parallel circuit is composed of three resistors. The total resistance of the circuit can be calculated by using the formula, the reciprocal of the total resistance is the sum of the reciprocals of the individual resistances. From Ohm’s law, we can calculate the current through each resistor by dividing the total voltage by the resistance of each resistor.In summary, the results recorded in photo 2 and photo 3 are consistent with the discussions of current through series and parallel circuits in the background. In a series circuit, the current through each resistor is the same while in a parallel circuit, the current through each resistor is inversely proportional to its resistance.
To know more about Ohm’s law visit:
https://brainly.com/question/1247379
#SPJ11
Two towers have heights of 445 m and 570 m. If objects were
dropped from the top of each, what would be the difference in the
time it takes the objects to reach the ground?
Answer:
The time it takes for an object to fall to the ground depends on the height from which it is dropped and the acceleration due to gravity. Assuming there is no air resistance, the objects will fall freely under the influence of gravity.
The time it takes for an object to fall can be calculated using the formula:
t = √(2h/g),
where t is the time, h is the height, and g is the acceleration due to gravity (approximately 9.8 m/s^2 on Earth).
Let's calculate the time it takes for the object dropped from the first tower (height = 445 m):
t1 = √(2 * 445 m / 9.8 m/s^2)
= √(90.61 s^2)
≈ 9.52 seconds (rounded to two decimal places).
Now, let's calculate the time it takes for the object dropped from the second tower (height = 570 m):
t2 = √(2 * 570 m / 9.8 m/s^2)
= √(116.33 s^2)
≈ 10.79 seconds (rounded to two decimal places).
The difference in time it takes for the objects to reach the ground is:
Δt = t2 - t1
= 10.79 s - 9.52 s
≈ 1.27 seconds (rounded to two decimal places).
Therefore, the difference in time it takes the objects to reach the ground when dropped from the two towers is approximately 1.27 seconds.
As per the details given, the difference in the time it takes for the objects to reach the ground is approximately 1.26 seconds.
The equation for how long it takes an object to fall freely can be used to determine how much longer objects will take to reach the ground when dropped from two different heights:
[tex]t =\sqrt{(2h/g)}[/tex]
For the first tower with a height of 445 m:
[tex]t1 = \sqrt{(2 * 445 / 9.8 )}t2 = \sqrt{(2 * 570 / 9.8)x}[/tex]
So,
Δt = t2 - t1
t1 = √(2 * 445 / 9.8) ≈ 9.01 seconds
t2 = √(2 * 570 / 9.8) ≈ 10.27 seconds
Δt = 10.27 s - 9.01 s ≈ 1.26 seconds
Thus, the difference in the time it takes for the objects to reach the ground is approximately 1.26 seconds.
For more details regarding difference in the time, visit:
https://brainly.com/question/31970511
#SPJ4
(a) Find the magnitude of the gravitational force (in N) between a planet with mass 7.75 x 1024 kg and its moon, with mass 2.40 x 1022 kg, if the average distance between their centers is 2.90 x 108 m
The magnitude of the gravitational force between the planet and its moon is 2.34 x 10²⁰ N.
The gravitational force between two objects can be calculated using Newton's law of universal gravitation, which states that the force is proportional to the product of their masses and inversely proportional to the square of the distance between their centers.
The formula for gravitational force is F = G * (m1 * m2) / r², where F is the gravitational force, G is the gravitational constant (approximately 6.674 x 10⁻¹¹ Nm²/kg²), m1 and m2 are the masses of the two objects, and r is the distance between their centers.
Plugging in the given values, we have:
F = (6.674 x 10⁻¹¹ Nm²/kg²) * (7.75 x 10²⁴ kg) * (2.40 x 10²² kg) / (2.90 x 10⁸ m)²
Simplifying the expression, we find:
F = 2.34 x 10²⁰ N
Therefore, the magnitude of the gravitational force between the planet and its moon is 2.34 x 10²⁰ N.
To know more about gravitational force, refer here:
https://brainly.com/question/32609171#
#SPJ11
explain the main differences between alpha beta and gamma rays
The main differences between alpha, beta, and gamma rays are as follows:Alpha radiation is a form of radiation that is positively charged. It's made up of two neutrons and two protons. Gamma radiation, which is made up of high-energy photons, is neutral. They have a lot of energy and can easily pass through materials.
Alpha particles have the lowest penetrating power of the three, while gamma rays have the greatest. They're also the most ionizing, followed by beta particles. When an alpha particle passes through matter, it collides with the atoms, causing ionization and a release of energy that is absorbed by the atoms.Beta radiation has a greater penetrating power than alpha radiation but less than gamma radiation. Beta particles have a maximum range of around 1 metre in air and can easily penetrate materials such as paper and aluminium foil but not thicker materials such as wood or lead.Gamma radiation has a much higher penetrating power than alpha and beta radiation, requiring dense materials like lead or concrete to absorb it.
Gamma rays have a range of up to several kilometres in air and are highly penetrating, easily passing through the human body and exposing any living tissue to ionizing radiation.Long answer:Alpha, beta, and gamma rays are the three types of radiation that are frequently discussed. Alpha particles are the least penetrating, while gamma rays are the most penetrating. Gamma rays have a range of up to several kilometres in air and are highly penetrating, easily passing through the human body and exposing any living tissue to ionizing radiation. They have a lot of energy and can easily pass through materials. Gamma rays, like X-rays, are a form of electromagnetic radiation, but they have a lot more energy.Alpha particles, on the other hand, are large and heavy and are made up of two protons and two neutrons. They only go through a few centimeters of air and are stopped by a sheet of paper or the outer layer of skin. They're highly ionizing but have a short range, so they're only harmful when ingested or inhaled. Beta particles, on the other hand, are high-energy electrons that can easily penetrate thin materials like aluminium foil or a sheet of paper. Beta particles can go through up to several metres of air and are moderately ionizing.
To know more about gamma rays visit :-
https://brainly.com/question/14847283
#SPJ11
9. An electron-positron pair has 12800eV of Ex. What photon frequency produced this?
An electron-positron pair has 12800eV of Ex then the photon frequency that produced the electron-positron pair with 12800 eV of energy is approximately 3.10 x [tex]10^1^8[/tex] Hz.
To determine the photon frequency that produced an electron-positron pair with 12800eV of energy, we can use the relationship between energy and frequency given by the equation:
E = hf
Where:
E is the energy of the photon,
h is Planck's constant (6.626 x J·s), and
f is the frequency of the photon.
First, we need to convert the energy from electron volts (eV) to joules (J). We know that 1 eV is equal to 1.602 x [tex]10^-^1^9[/tex] J, so:
E = 12800 eV * (1.602 x[tex]10^-^1^9[/tex] J/eV)
E = 2.05 x [tex]10^-^1^5[/tex] J
Now, we can rearrange the equation to solve for the frequency:
f = E / h
f = (2.05 x [tex]10^-^1^5[/tex]J) / (6.626 x [tex]10^-^3^4^[/tex] J·s)
f ≈ 3.10 x [tex]10^1^8[/tex] Hz
For more such information on: frequency
https://brainly.com/question/254161
#SPJ8
Write short notes on
Forced circulation evaporation
Agitated thin film evaporation
Agitated thin film evaporation is a process used to separate components from liquid mixtures. It is particularly useful for heat-sensitive materials that need to be processed at low temperatures.
The process involves heating the liquid mixture in a vessel while simultaneously exposing it to a vacuum. The heat and vacuum cause the mixture to evaporate, and the resulting vapors are condensed back into a liquid, which can be collected separately. The process is typically carried out in a thin film evaporator, which consists of a heated cylindrical vessel with a rotating blade that agitates the mixture as it evaporates. This helps to increase the rate of evaporation and improve the quality of the separated components.
When a liquid becomes a gas, this is known as evaporation. When puddles of rain "disappear" on a hot day or when wet clothes dry in the sun, it is easy to imagine. In these models, the fluid water isn't really disappearing — it is dissipating into a gas, called water fume. Global evaporation takes place.
Know more about evaporation, here:
https://brainly.com/question/28319650
#SPJ11
how do supersonic flights create sonic boom? please explain in detail. 15px
Supersonic flights create sonic boom due to the shock waves produced by the aircraft as it travels through the air faster than the speed of sound.
Supersonic flights are the flights that travel faster than the speed of sound (approximately 1,225 km/h or 761 mph at sea level). These flights create a sonic boom which is a loud explosive noise caused by the shock waves created by the aircraft traveling at supersonic speeds.
The shock waves are produced as the aircraft moves through the air and the air molecules in front of the aircraft are compressed into a small area. This creates a high-pressure area, also known as a shock wave, which moves away from the aircraft in a cone shape. When this cone-shaped shock wave reaches the ground, it creates a loud explosive noise, which is commonly known as a sonic boom.
The intensity of the sonic boom depends on various factors such as the size and shape of the aircraft, its altitude, and its speed. For example, the larger and heavier the aircraft is, the larger the shock wave it creates and hence, the louder the sonic boom. To reduce the sonic boom, supersonic aircraft are designed in a way that they produce a less intense shock wave.
Learn more about sonic boom here:
https://brainly.com/question/31609435
#SPJ11
the magnetic field lines of a bar magnet spread out from thenorth end to the south end to the north to the to the edges.
The magnetic field lines of a bar magnet spread out from the north end to the south end to the north to the edges. This is because a bar magnet has two poles; the north and south poles. Magnetic field lines start from the north pole of a bar magnet, move towards the south pole, and then turn back from the south pole to the north pole.
Magnetic field lines are invisible lines of force that show the direction of the magnetic field at every point. These lines do not intersect, and the density of the lines is proportional to the strength of the magnetic field. In the case of a bar magnet, the magnetic field lines are denser at the poles and spread out as they move away from the poles. At the midpoints of the magnet, the magnetic field lines run parallel to the axis of the magnet.In general, magnetic field lines start from the north pole and end at the south pole. Therefore, the south end of a bar magnet is the region where the magnetic field lines terminate. If a bar magnet is cut into two pieces, each piece will have its own north and south poles. This is because the magnetic field of a bar magnet is due to the alignment of its atoms, which all have a north and south pole.In summary, the magnetic field lines of a bar magnet spread out from the north pole, move towards the south pole, and then turn back from the south pole to the north pole. The south end of a bar magnet is the region where the magnetic field lines terminate.
To know more about magnetic field visit :
brainly.com/question/14848188
#SPJ11
Answer:
north end to the south end.
Explanation:
This person above me is wrong and did it edge
the cyclist travels to point a pedaling until he reaches a speed va = 8 m\s
When the cyclist travels to point A, pedaling until he reaches a speed of vA = 8 m/s, several factors determine the speed the cyclist can attain while pedaling. These factors are the force applied, the resistance of the surface, the slope or incline of the surface, and the friction force.
Cycling on level ground, for example, without a headwind or tailwind, the main factor that determines the cyclist's speed is pedaling force, specifically, the force produced by the cyclist's leg muscles on the pedals. The following factors determine the speed the cyclist can attain:Pedaling force: The force exerted on the pedals determines the speed at which the cyclist can travel. When the cyclist exerts more force on the pedals, the bicycle moves faster. The more power the cyclist produces, the higher the speed achieved. The resistance of the surface: The surface's resistance is an essential factor determining the cyclist's speed. The type of terrain, the quality of the road, and the presence of obstacles, like sand or potholes, influence the cyclist's speed. Slope or incline: The inclination or slope of the surface is also a factor that affects the cyclist's speed. When cycling uphill, the cyclist must exert more force on the pedals to maintain a certain speed. Similarly, when cycling downhill, gravity accelerates the bike, and the cyclist may need to brake to maintain a safe speed. Friction force: The resistance of air and the friction between the bicycle's tires and the ground can affect the cyclist's speed. The cyclist may have to adjust their posture to reduce air resistance and optimize their speed to overcome the force of friction while pedaling.In conclusion, when the cyclist travels to point A, pedaling until he reaches a speed of vA = 8 m/s, several factors determine the speed the cyclist can attain while pedaling. These factors include pedaling force, the resistance of the surface, slope or incline, and friction force.
For more information on cyclist visit:
brainly.com/question/19386851
#SPJ11
find the frequency in terahertz of visible light with a wavelength of 441 nm in vacuum.
The frequency of visible light with a wavelength of 441 nm in a vacuum is approximately 6.80 × 10^2 terahertz (THz).
To find the frequency of visible light with a wavelength of 441 nm, we can use the equation:
c = λ * ν
where c is the speed of light in a vacuum, λ is the wavelength, and ν is the frequency.
The speed of light in a vacuum is approximately 3.00 × 10^8 meters per second (m/s).
Converting the wavelength from nanometers (nm) to meters (m):
λ = 441 nm = 441 × 10^-9 m
Now we can rearrange the equation and solve for the frequency:
ν = c / λ = (3.00 × 10^8 m/s) / (441 × 10^-9 m)
Calculating the value, we find:
ν ≈ 6.80 × 10^14 Hz
To convert this frequency to terahertz (THz), we divide by 10^12:
ν ≈ 6.80 × 10^2 THz
Therefore, the frequency of visible light with a wavelength of 441 nm in a vacuum is approximately 6.80 × 10^2 terahertz (THz).
To learn more about frequency click here
https://brainly.com/question/2140860
#SPJ11
A bicycle and rider going 13 m/s approach a hill. Their total mass is 93 kg. (a) What is their kinetic energy? J (b) If the rider coasts up the hill without pedaling, how high above its starting level will the bicycle be when it finally rolls to a stop? m 52 cm compare to the elastic potential energy stored in the spring after it was compressed 13 cm ? The elastic energy stored in the spring when compressed 52 cm is the same as when it is compressed 13 cm. The elastic energy stored in the spring when compressed 52 cm is four times as much as when the spring is compressed 13 cm. The elastic energy stored in the spring when compressed 52 cm is sixteen times as much as when the spring is compressed 13 cm.
a) the kinetic energy of the bicycle and rider is 8412.75 J.
b) the bicycle will be 105.75 m above its starting level when it finally rolls to a stop.
c) the elastic energy stored in the spring when compressed 52 cm is sixteen times as much as when the spring is compressed 13 cm.
a) The kinetic energy of an object depends on both its mass and its speed.
Kinetic Energy (K) = 1/2 mv²
Substituting the given values,K = 1/2 × 93 × (13)²= 8412.75 J
Therefore, the kinetic energy of the bicycle and rider is 8412.75 J.
(b) Potential Energy:
The energy that an object possesses due to its position or state is called Potential Energy. It is of three types Gravitational potential energy, elastic potential energy, and electric potential energy.
In this case, we are interested in gravitational potential energy. When the rider coasts up the hill without pedaling, the total energy of the system remains the same. The kinetic energy of the bicycle is converted into gravitational potential energy as it moves up the hill.
Initial kinetic energy = Final Potential Energy
1/2 mv² = mgh
Where,h is the height gained by the rider above its starting level.
We need to calculate h.
Substituting the given values,1/2 × 93 × (13)² = 93 × 9.8 × hh = 105.75 m
Therefore, the bicycle will be 105.75 m above its starting level when it finally rolls to a stop.
c) Compare to the elastic potential energy stored in the spring after it was compressed 13 cm:
The elastic potential energy stored in a spring is given by,
Elastic Potential Energy (E) = 1/2 kx²
Where,k is the spring constant, and x is the displacement of the spring from its equilibrium position.When the spring is compressed by 13 cm, its potential energy is given by
E1 = 1/2 k (13 cm)²
When the spring is compressed by 52 cm, its potential energy is given byE2 = 1/2 k (52 cm)²
Comparing the two energies,
E2/E1= (1/2 k (52 cm)²) / (1/2 k (13 cm)²)= (52/13)²= 16
Hence, the elastic energy stored in the spring when compressed 52 cm is sixteen times as much as when the spring is compressed 13 cm.
Learn more about kinetic energy at:
https://brainly.com/question/29018440
#SPJ11
(a) The kinetic energy of a bicycle and rider going 13 m/s is calculated using the formula, KE = (1/2)mv², where m is the mass of the bicycle and rider and v is the speed of the bicycle and rider.KE = (1/2)mv²= (1/2)(93 kg)(13 m/s)²= 8,443.5 J Thus, the kinetic energy of the bicycle and rider is 8,443.5 J.
(b) If the rider coasts up the hill without pedaling, the potential energy of the bicycle and rider will increase. The final potential energy of the bicycle and rider will be equal to the initial kinetic energy of the bicycle and rider. Thus, using the conservation of energy principle, we can find the height the bicycle will reach. The potential energy of the bicycle and rider is given by the formula, PE = mgh, where m is the mass of the bicycle and rider, g is the acceleration due to gravity and h is the height above the starting level where the bicycle will come to a stop. Equating the kinetic energy and potential energy of the bicycle and rider, we have:
KE = PE8,443.5 J = mghh = 8,443.5 J / (93 kg x 9.8 m/s²)h = 9.04 m
Thus, the height above its starting level where the bicycle will finally come to a stop is 9.04 m.
To compare the elastic potential energy stored in the spring after it was compressed 13 cm to that stored when it was compressed 52 cm, we can use the formula for elastic potential energy, PE = (1/2)kx², where k is the spring constant and x is the distance compressed. Since the spring constant remains constant, we can compare the elastic potential energy by comparing the squares of the distances compressed. Therefore, the elastic energy stored in the spring when compressed 52 cm is sixteen times as much as when the spring is compressed 13 cm. Hence, the correct option is the third option.
The elastic energy stored in the spring when compressed 52 cm is sixteen times as much as when the spring is compressed 13 cm.
Learn more about kinetic energy: https://brainly.com/question/999862
#SPJ11
A metallic sphere with radius R=4cm and charge q = 9*10-9 C is placed inside a hollow metallic sphere with internal radius R1=6cm and external radius R2=8cm and total positive charge Q= 9*10-9 C.
1. Using Gauss theorem, what happens to the charge on the hollow sphere? What will be the charge on its surface?
2. Calculate the potential difference between the hollow sphere and the internal sphere.
1. The charge on the hollow sphere is zero, and the charge on its surface is also zero.
2. The potential difference between the hollow sphere and the internal sphere is zero.
Explanation to the above given short answers are written below,
1. According to Gauss's law, the total electric flux through a closed surface is equal to the total charge enclosed by that surface divided by the permittivity of free space (ε₀).
In electrostatic equilibrium, the electric field inside a conductor is zero.
In this case, the metallic hollow sphere is a conductor, and the charge on the inner sphere induces an equal and opposite charge on the inner surface of the hollow sphere.
Since the electric field inside the hollow sphere is zero, there is no net charge on the hollow sphere itself, and the charge is redistributed on its inner surface.
2. Inside a conductor in electrostatic equilibrium, the electric potential is constant. Therefore, there is no potential difference between any two points inside the hollow sphere or between the hollow sphere and the internal sphere.
This is because the charges distribute themselves in such a way that the electric field inside the conductor is zero. As a result, the potential difference between the hollow sphere and the internal sphere is zero.
To know more about "Gauss's law" refer here:
https://brainly.com/question/31850148#
#SPJ11
Part A How much gravitational potential energy does a system comprising a 110-kg object and Earth have if the object is one Earth radius above the ground? Express your answer with the appropriate unit
The system comprising a 110-kg object and Earth has approximately 6.85 x 10^7 joules of gravitational potential energy when the object is one Earth radius above the ground.
The gravitational potential energy (PE) of an object near the surface of the Earth can be calculated using the formula:
PE = mgh
Where:
PE = gravitational potential energy
m = mass of the object
g = acceleration due to gravity
h = height above the reference point
Given:
m = 110 kg
g = 9.8 m/s² (approximate value for acceleration due to gravity near the Earth's surface)
h = radius of the Earth (approximately 6.37 x 10^6 meters)
Substituting the values into the formula:
PE = (110 kg)(9.8 m/s²)(6.37 x 10^6 meters)
Calculating:
PE ≈ 6.85 x 10^7 joules
Therefore, the system comprising a 110-kg object and Earth has approximately 6.85 x 10^7 joules of gravitational potential energy when the object is one Earth radius above the ground.
The gravitational potential energy of the system comprising a 110-kg object and Earth is approximately 6.85 x 10^7 joules when the object is one Earth radius above the ground.
To know more about gravitational, visit:
https://brainly.com/question/72250
#SPJ11
*20 p 13. A baseball fan on a warm summer day (30 deg C) sits in the bleachers 120 m away from home plate. a) What is the speed of sound in air at 30 deg C? b) How long after seeing the ball hit the b
The speed of sound in air a) at 30°C is approximately 346.13 m/s. b) The time it takes for the fan to hear the crack of the bat after seeing the ball hit is approximately 0.346 seconds.
a) To calculate the speed of sound in air at 30°C, we can use the formula:
v = √(γRT)
Where:
v is the speed of sound,
γ is the adiabatic index for air (approximately 1.4),
R is the gas constant for air (approximately 287 J/(kg·K)), and
T is the temperature in Kelvin (30 + 273.15).
Plugging in the values, we have:
v = √(1.4 * 287 * (30 + 273.15))
≈ √(1.4 * 287 * 303.15)
≈ √(123501.99)
≈ 346.13 m/s
b) To calculate the time it takes for the fan to hear the crack of the bat, we can use the formula:
t = d/v
Where:
t is the time,
d is the distance between the fan and the home plate (120 m), and
v is the speed of sound in air.
Plugging in the values, we have:
t = 120 m / 346.13 m/s
≈ 0.346 seconds
Therefore, the fan hears the crack of the bat approximately 0.346 seconds after seeing the ball hit the bat.
To know more about speed, refer here:
https://brainly.com/question/13263542#
#SPJ11
6- The maximum energy of a mass-spring system undergoing SHM is 5.64 J. The mass is 0.128 kg and the force constant is 244 N/m. a- What is the amplitude of the vibration? b- Find the speed of the mass
a. The amplitude of the vibration is 0.2 meters. b. The speed of the mass is 1.33 meters per second.
The maximum energy of a mass-spring system undergoing SHM (Simple Harmonic Motion) is given as 5.64 J. The mass is 0.128 kg and the force constant is 244 N/m. We have to find the amplitude of the vibration and the speed of the mass.To find the amplitude of the vibration, we use the formula for the maximum potential energy of a mass-spring system in terms of the amplitude given as;[tex]\frac{1}{2}kA^2[/tex] = 5.64 JA = 0.2 m (approx)Therefore, the amplitude of the vibration is 0.2 meters.Now, we have to find the speed of the mass.
To do that we use the formula for speed given as;v = Aωwhere, A is the amplitude and ω is the angular frequency. To find ω we use the formula for the angular frequency in terms of force constant and mass given as;ω = [tex]\sqrt{\frac{k}{m}}[/tex]where, k is the force constant and m is the mass.ω = [tex] \sqrt{\frac{244}{0.128}}[/tex]ω = 14.4 rad/s Substituting A and ω in the formula for speed we get,v = 0.2 × 14.4v = 1.33 m/s Therefore, the speed of the mass is 1.33 meters per second.
Know more about amplitude vibration, here:
https://brainly.com/question/1380029
#SPJ11
what is an electronic document that confirms the identity of a website or server and verifies that a public key belongs to a trustworthy individual or company?
A digital certificate is an electronic document that confirms the identity of a website or server and verifies that a public key belongs to a trustworthy individual or company. It is an essential security mechanism that ensures the authenticity and confidentiality of communications over the internet.
An electronic document that confirms the identity of a website or server and verifies that a public key belongs to a trustworthy individual or company is known as a digital certificate.
A digital certificate is a vital security mechanism used to authenticate and secure communications over the internet. It is issued by a Certificate Authority (CA), which is a trusted third party that confirms the identity of the website or server and the public key associated with it.A digital certificate typically contains the following information:
Name of the owner
Validity dates of the certificate
Certificate serial number
Digital signature of the certificate issuer
Public key of the certificate owner
In conclusion, a digital certificate is an electronic document that confirms the identity of a website or server and verifies that a public key belongs to a trustworthy individual or company. It is an essential security mechanism that ensures the authenticity and confidentiality of communications over the internet.
To know more about electronic document visit:
brainly.com/question/31595862
#SPJ11
what is the wavelength of a 29.75×109hz radar signal in free space? the speed of light is 2.9979×108m/s .
According to the given question we have the wavelength of a 29.75×109 Hz radar signal in free space is approximately 10.057 mm.
To calculate the wavelength of a radar signal, we need to use the formula:Wavelength = Speed of light / Frequency
Given that the frequency of the radar signal is 29.75×109 Hz and the speed of light is 2.9979×108 m/s, we can substitute these values in the formula as follows: Wavelength = 2.9979×108 m/s / 29.75×109 Hz= 0.010057 m or 10.057 mm
Therefore, the wavelength of a 29.75×109 Hz radar signal in free space is approximately 10.057 mm.
To know more about Wavelength visit :
https://brainly.com/question/7143261
#SPJ11
in figure p8.4, a 70 kg man walks out on a 10 kg beam that rests on, but is not attached to, two supports. when the beam just starts to tip, what is the force exerted on the beam by the right support?
The force exerted on the beam by the right support is 457.8 N. Notice that the beam weighs 10 kg and that the man exerts a force of 686.7 N on it. Therefore, the supports must exert a total force of 696.6 N (686.7 N + 10 kg x 9.81 m/s²) on the beam.
The 70 kg man's center of gravity is located 0.8 m from the left support. The beam weighs 10 kg. When the beam is about to tip over, the force exerted on the beam by the right support is 560 N.
Let's begin by calculating the gravitational force (Fg) exerted by the man on the beam:F_g = mgF_g = (70\ kg) (9.81\ m/s^2) = 686.7\ N$$Next, let's find the moment (M) of the gravitational force (Fg) about the left support:M = F_g\ dM = (686.7\ N) (0.8\ m) = 549.36\ N\cdot m.
The gravitational force (Fg) generates a counterclockwise moment (M) about the left support. Hence, the beam starts to tip clockwise. The right support must generate a clockwise moment equal in magnitude to the counterclockwise moment generated by Fg about the left support. Since the beam is in static equilibrium, the sum of the moments about any point must be equal to zero.
Let's find the moment generated by the right support (MRS):M_{RS} = MF_{RS}\ L_2 = F_g\ L_1F_{RS} = \frac{F_g\ L_1}{L_2}F_{RS} = \frac{(686.7\ N)(0.8\ m)}{(1.2\ m)} = 457.8\ N .
The force exerted on the beam by the right support is 457.8 N. Notice that the beam weighs 10 kg and that the man exerts a force of 686.7 N on it. Therefore, the supports must exert a total force of 696.6 N (686.7 N + 10 kg x 9.81 m/s²) on the beam.
To know more about Force visit :
https://brainly.com/question/30507236
#SPJ11
What principle allows you to determine the relative ages of units D and M? Answer: 26. What principle allows you to match unit B on the right side of the diagram to the same unit on the left side of the diagram? 27. The erosional surface labeled N is a (an): Answer: 28. Draw arrows on the fault planes for fault L and fault M and label the hanging wall (HW) and footwall (FW) for both faults. 29. What name best describes fault L? 30. Which fault is the oldest? Answer: 32. What clast size(s) would you expect unit A to have? Answer: 31. What type of plate tectonic boundary would most likely be responsible for forming fault M? Answer: Answer: Answer 33. In which sedimentary environment would unit C most likely form? Answer: 34. If unit A were to experience a low grade regional metamorphic event, what metamorphic rock would form? 112 Geologic Time Leche Answer: 35. Which sedimentary rock on the diagram is most poorly sorted? Answer: 36. If all of the rocks in the diagram were deposited during the Cenozoic, what is the maximum age. that the rocks could be? Answer:
The principle of cross-cutting relationships allows you to determine the relative ages of units D and M. If one unit (D) is cut by another unit (M), then the unit doing the cutting (M) is younger.
What principle allows you to determine the relative ages of units D and M?The principle of cross-cutting relationships allows you to determine the relative ages of units D and M. If one unit (D) is cut by another unit (M), then the unit doing the cutting (M) is younger.
The principle of continuity allows you to match unit B on the right side of the diagram to the same unit on the left side of the diagram. It states that rock layers continue horizontally and can be correlated across a distance.
The erosional surface labeled N is an unconformity, specifically a disconformity, which represents a period of erosion or non-deposition between parallel layers of sedimentary rocks.
Fault L is a normal fault, where the hanging wall moves down relative to the footwall.
Fault M is the oldest fault because it cuts across both unit D and unit J.
Unit A would likely have fine clast size.
A divergent plate boundary would most likely be responsible for forming fault M, where two plates move away from each other.
Unit C would most likely form in a marine or deep-water sedimentary environment.
If unit A were to experience a low-grade regional metamorphic event, a slate would form.
Unit C, the conglomerate, is the most poorly sorted sedimentary rock.
The maximum age that the rocks could be is approximately 65 million years, as the Cenozoic era began approximately 65 million years ago and continues to the present.
Learn more about principle
brainly.com/question/4525188
#SPJ11
A farmer pushes a 50 kg wheel barrow from rest to a speed of 5.0 m/s through a distance of 8.0 m. There is no friction acting between the ground and the wheel barrow, and the farmer is pushing the wheel barrow in the same direction it moves, the work done by the farmer on the wheel barrow is ___ J.
2. A 1400 kg roller coaster begins at a speed of 7.0 m/s and a height of 30 m above the ground. It rolls down the track to ground level. When the roller coaster is one-third of the way down the track (20 m above the ground), it is travelling at _____ m/s.
3. In order to slow a 76.0 kg rider (and bike) from 13.0 m/s to 4.00 m/s, what amount of work must be done?
1. The work done by the farmer on the wheelbarrow is 625 J.
2. When the roller coaster is one-third of the way down the track (20 m above the ground), it is traveling at approximately 32.67 m/s.
3. The amount of work done to slow the rider (and bike) from 13.0 m/s to 4.00 m/s is approximately -12168 J.
1. The work done by the farmer on the wheelbarrow can be calculated using the work-energy principle, which states that the work done on an object is equal to the change in its kinetic energy. The formula for work is given by:
Work = ΔKE = KE_final - KE_initial
The initial kinetic energy (KE_initial) is zero since the wheelbarrow starts from rest. The final kinetic energy (KE_final) can be calculated using the formula:
KE_final = (1/2) * m * v^2
Where m is the mass of the wheelbarrow and v is its final velocity. Substituting the given values:
m = 50 kg
v = 5.0 m/s
KE_final = (1/2) * 50 kg * (5.0 m/s)^2 = 625 J
Therefore, the work done by the farmer on the wheelbarrow is 625 J.
2. To find the velocity of the roller coaster when it is one-third of the way down the track (20 m above the ground), we can use the principle of conservation of energy. The potential energy (PE) at the initial height is converted into kinetic energy (KE) at that point. The formula for conservation of energy is:
PE_initial = KE_final
The potential energy at the initial height is given by:
PE_initial = m * g * h
Where m is the mass of the roller coaster, g is the acceleration due to gravity, and h is the initial height. Substituting the given values:
m = 1400 kg
g = 9.8 m/s^2
h = 30 m
PE_initial = 1400 kg * 9.8 m/s^2 * 30 m = 411600 J
The kinetic energy at that point can be calculated using the formula:
KE_final = (1/2) * m * v^2
Where v is the final velocity. Substituting the given values:
m = 1400 kg
v = ?
KE_final = 411600 J
Rearranging the equation, we have:
v = sqrt((2 * KE_final) / m)
v = sqrt((2 * 411600 J) / 1400 kg)
≈ 32.67 m/s
Therefore, when the roller coaster is one-third of the way down the track (20 m above the ground), it is traveling at approximately 32.67 m/s.
3. The work done to slow down the rider (and bike) can be calculated using the work-energy principle. The work done is equal to the change in kinetic energy. The formula for work is:
Work = ΔKE = KE_final - KE_initial
The initial kinetic energy (KE_initial) is (1/2) * m * v_initial^2, and the final kinetic energy (KE_final) is (1/2) * m * v_final^2.
Substituting the given values:
m = 76.0 kg
v_initial = 13.0 m/s
v_final = 4.00 m/s
Work = (1/2) * m * v_final^2 - (1/2) * m * v_initial^2
Work = (1/2) * 76.0 kg * (4.00 m/s)^2 - (1/2) * 76.0 kg * (13.0 m/s)^2
≈ -12168 J
Therefore, the amount of work done to slow the rider (and bike) from 13.0 m/s to 4.00 m/s is approximately -12168 J. The negative sign indicates that work is done against the direction of motion.
To read more about wheelbarrow, visit:
https://brainly.com/question/24143364
#SPJ11
calculate the equilibrium constant k at 298 k for this reaction
The equilibrium constant (K) at 298 K for this reaction is 1.25 × 10¹⁰ mol⁻².
To calculate the equilibrium constant (K) at 298 K, we will need to utilize the equilibrium expression of the given chemical reaction.
The equilibrium constant (K) is defined as the ratio of the concentration of products raised to their stoichiometric coefficients to the concentration of reactants raised to their stoichiometric coefficients.
It is given as:K = [C]c[D]d / [A]a[B]b where A, B, C, and D are the chemical species present in the chemical reaction, and a, b, c, and d are the stoichiometric coefficients of A, B, C, and D respectively.
Also, [A], [B], [C], and [D] are the molar concentrations of A, B, C, and D at equilibrium, respectively.
Given reaction:N2(g) + 3H2(g) ⇌ 2NH3(g)In this reaction, a mole of nitrogen reacts with three moles of hydrogen to form two moles of ammonia.
Therefore, the equilibrium constant expression for this reaction is given as:K = [NH3]² / [N2][H2]³
The equilibrium constant (K) at 298 K for this reaction can be calculated by plugging the concentration of NH3, N2, and H2 at equilibrium in the above expression and solving for K.
Example:Suppose the concentration of NH3, N2, and H2 at equilibrium is found to be 0.2 M, 0.4 M, and 0.2 M respectively, then the equilibrium constant (K) at 298 K for this reaction will be:K = [NH3]² / [N2][H2]³K = (0.2)² / (0.4)(0.2)³K = 1.25 × 10¹⁰ mol⁻²
The equilibrium constant (K) at 298 K for this reaction is 1.25 × 10¹⁰ mol⁻².
Learn more about equilibrium constant
brainly.com/question/28559466
#SPJ11
What speed would a fly with a mass of 0.65 g need in order to have the same kineticenergy as a 1250 kg automobile traveling at a speed of 11 m/s?
1
m/s
The speed that a fly with a mass of 0.65 g would need in order to have the same kinetic energy as a 1250 kg automobile traveling at a speed of 11 m/s is 2133.97 m/s.
Given:mass of fly, m1 = 0.65 g = 0.00065 kg
speed of automobile, v2 = 11 m/smass of automobile, m2 = 1250 kg
To find: Speed of fly with kinetic energy same as automobile
Formula:Kinetic energy = 0.5 * mass * speed²
Solution:Let v1 be the speed of the fly
Kinetic energy of automobile = Kinetic energy of fly0.5 * m2 * v2² = 0.5 * m1 * v1²
Substituting given values0.5 * 1250 * 11² = 0.5 * 0.00065 * v1²v1² = (0.5 * 1250 * 11²)/0.00065v1² = 4545454.55v1 = √(4545454.55)v1 = 2133.97 m/s
Therefore, the speed that a fly with a mass of 0.65 g would need in order to have the same kinetic energy as a 1250 kg automobile traveling at a speed of 11 m/s is 2133.97 m/s.
Learn more about kinetic energy
brainly.com/question/999862
#SPJ11
What capacitor in series with a 100Ω resistor and a 25.0mH inductor will give a resonance frequency of 1000 Hz ? Express your answer in microfarads.
The capacitance of a capacitor in series with a 100 Ω resistor and a 25.0 mH inductor that would generate a resonance frequency of 1000 Hz is 0.399 µF.
Resonant frequency for a series RLC circuit is given by the expression f=1/2π√(LC). The values of C, L and f are given as 25.0 mH, 1000 Hz, and 100 Ω respectively. By substituting these values in the resonant frequency formula, we get 1000 = 1/2π√(C x 25.0 x 10⁻³).
Therefore, the capacitance can be found out as C = 1/[(2π x 1000)² x 25.0 x 10⁻³]C = 0.399 µF. Thus, a capacitor of 0.399 µF in series with a 100 Ω resistor and a 25.0 mH inductor would generate a resonance frequency of 1000 Hz.
Learn more about capacitance here:
https://brainly.com/question/14746225
#SPJ11
A total charge of 4.89 C is distributed on two metal spheres. When the spheres are 10.00 cm apart, they each feel a repulsive force of 4.1*10^11 N. How much charge is on the sphere which has the lower
Answer:
Explanation:
Let's denote the charges on the two metal spheres as q₁ and q₂. We are given that the total charge is 4.89 C, so we can write the equation:
q₁ + q₂ = 4.89 C
We also know that when the spheres are 10.00 cm apart, they each feel a repulsive force of 4.1*10^11 N. The force between two charged objects can be calculated using Coulomb's Law:
F = k * (|q₁| * |q₂|) / r^2
where F is the force, k is the electrostatic constant (9 * 10^9 N·m^2/C^2), |q₁| and |q₂| are the magnitudes of the charges, and r is the distance between the spheres.
Since the spheres feel the same repulsive force, we have:
k * (|q₁| * |q₂|) / r^2 = 4.1 * 10^11 N
Substituting the given values: k = 9 * 10^9 N·m^2/C^2 and r = 10.00 cm = 0.10 m:
(9 * 10^9 N·m^2/C^2) * (|q₁| * |q₂|) / (0.10 m)^2 = 4.1 * 10^11 N
Simplifying the equation:
|q₁| * |q₂| = (4.1 * 10^11 N) * (0.10 m)^2 / (9 * 10^9 N·m^2/C^2)
|q₁| * |q₂| = 4.1 * 10^11 N * 0.01 m^2 / 9
|q₁| * |q₂| = 4.1 * 10^9 C
Since the charges are of the same magnitude:
|q₁| * |q₂| = q₁ * q₂ = 4.1 * 10^9 C
Now, we can solve the system of equations formed by the two equations:
q₁ + q₂ = 4.89 C
q₁ * q₂ = 4.1 * 10^9 C
We can use substitution or elimination to solve the system. Let's use substitution.
Rearranging the first equation, we have:
q₁ = 4.89 C - q₂
Substituting this expression into the second equation:
(4.89 C - q₂) * q₂ = 4.1 * 10^9 C
Expanding and rearranging the equation:
4.89q₂ - q₂^2 = 4.1 * 10^9
Rearranging and simplifying further:
q₂^2 - 4.89q₂ + 4.1 * 10^9 = 0
Now we can solve this quadratic equation for q₂. Using the quadratic formula:
q₂ = (-b ± √(b^2 - 4ac)) / 2a
where a = 1, b = -4.89, and c = 4.1 * 10^9, we can substitute the values and calculate q₂.
After finding the value of q₂, we can substitute it back into the equation q₁ = 4.89 C - q₂ to find the value of q₁.
Once we have the values of q₁ and q₂, we can determine which sphere has the lower charge.
The sphere with the lower charge has a charge of 2.81 C when the total charge of 4.89 C is distributed on two metal spheres
The electric force of repulsion, like the electric force of attraction, is directly proportional to the charge of the particles and inversely proportional to the square of the distance between them. When dealing with electrostatics, these variables must be kept in mind.
The electrostatic force between two charged spheres is[tex]F=kq1q2/r^2,[/tex]where k is Coulomb's constant, q1 and q2 are the charges on the two spheres, and r is the distance between them.If the spheres are charged with the same polarity, they will repel each other.
Force exerted on each sphere would be the same in magnitude and direction.The force of repulsion acting on each sphere is 4.1 x [tex]10^{11}[/tex] N, according to the problem. So, we have: F = kq1q2/[tex]r^2[/tex] , 4.1 x 10^11 N = [tex]10^{11}[/tex] where q = 4.89 C and r = 0.1 mK is a constant that is equal to 9.0 x [tex]10^{-9}[/tex] N·m
Solving for q1, the amount of charge on the sphere with the lower charge,q1 =[tex](r x F/k)^(1/2)[/tex] )q1 = [0.1m x (4.1 x [tex]10^{11}[/tex] N) / (9.0 x [tex]10^{11}[/tex] N·m = 2.81 C Therefore, the sphere with the lower charge has a charge of 2.81 C.
Know more about electrostatic force here:
https://brainly.com/question/9774180
#SPJ11
