In a step down transformer, voltage steps down. What factor must go up?
Answer:
A transformer that increases the voltage from primary to secondary (more secondary winding turns than primary winding turns) is called a step-up transformer. Conversely, a transformer designed to do just the opposite is called a step-down transformer.
Explanation:
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz mark me brainliest
Remy wonders if the height of the mountain has anything to do with the eventual size of the tsunami wave. How should Remy test this? A. Cause avalanches on several different mountains and see how large each resulting tsunami is. B. Build different-sized model mountains at the edge of a pool, pour sand down the side of each mountain, and see how large each resulting wave is. C. Pour different amounts of sand down the side of a model mountain into a pool and see how large each resulting wave is. D. Build a model town at the edge of a pool and see how large waves must be to cause damage to the buildings.
Answer:
The answer is B
Explanation:
I got this from study island
A CFL bulb has an efficiency of 0.42 and a imput of 14W. what is the output power
I really need help.
Answer:
The output power is 5.88 W.
Explanation:
We have,
Efficiency of CFL bulb is 0.42
Input power is 14 W
It is required to find the output power. The ratio of output power to the input power is called efficiency. It is given by :
[tex]\eta=\dfrac{P_o}{P_i}[/tex]
[tex]P_o=\eta\times P_i\\\\P_o=0.42\times 14\\\\P_o=5.88\ W[/tex]
So, the output power is 5.88 W.
what type of stars can collapse in a supernova explosion and become neutron stars
Answer:
red supergiants can
investigating sound waves lab please help!
Answer:first u have to figure out what the topic is then look for a rubric draft
Explanation:
Help
What are energy and work
Answer:
In physics, energy is the quantitative property that must be transferred to an object in order to perform work on, or to heat, the object. Energy is a conserved quantity; the law of conservation of energy states that energy can be converted in form, but not created or destroyed.
In physics, energy is the quantitative property that must be transferred to an object in order to perform work on, or to heat, the object. Energy is a conserved quantity; the law of conservation of energy states that energy can be converted in form, but not created or destroyed.
Explanation:
HOPE THIS HELPSA skier reaches the end of a 0.9 km track in 1.5 hours, at what speed does it travel?
(Please help,I need the answer as soon as possible)
Speed = Distance/Time
S = D/T
D = 0.9Km, T = 1.5hours,
S = 0.9/1.5
S = 0.6 m/s
hope it helps!
Answer: Speed =
distance = 0.9 * 1000 = 900 metres, because speed is measured in m/s so the km has to be converted to m
time = 1.5 * 60 = 90 seconds , because speed is measured in m/s so the time in minutes(m) has to be converted to seconds(s)
Speed =
= 10m/s
Read more on Brainly.com - https://brainly.com/question/11367821#readmore
Explanation: I don't know what this is but this is what I found and I hope it's helpful
Ski lift carry people along 150 m cable up the side of a mountain. Riders are lifted a total of 75 m in elevation. What is the ideal mechanical advantage of the ski lift?
Ideal Mechanical Advantage (IMA) can be found by using the formula:
IMA = ID/OD
ID = Input Distance
OD = Output Distance
In the question, we are given:
ID = 150
OD = 75
Now, solve the expression with what we have.
IMA = 150/75
IMA = 2
Therefore, the IMA is 2.
Best of Luck!
Are carbon compounds rigid and strong
Meeta used an elastic tape to measure the length of her window to stitch a curtain. Do you think she will be able to stitch a curtain of correct measurement? Yes/No . Give scientific reason in detail, also explain the correct method to measure the length of her window.
Answer:
No
Explanation:
She will not be able to measure the length of her window accurately due to instrumental error from her choice of instrument. The elastic nature of her tape would alter the measurement because it will stretch as she is taking her readings, thus reducing the true measurement of the length of her window.
To measure the length of her window, she could use an inelastic tape rule or a metre rule. These instruments would eliminate instrumental error.
How do oxbow lakes form?
Explanation:
It is formed when a river creates a meander, due to the river's eroding bank. After a long period of time, the meander curves and cuts, forming an oxbow lake.
Answer:
c
Explanation:
I did the test and got it right. I promise :)
A starter pistol is fired 150m away from the spectators who hear the gun 0.5s after they see it fired. How fast does sound travel?
(Please help!)
Answer:
300m/s
Explanation:
speed = distance/time
150/0.5
Which of the following statements about developing a personal fitness program is NOT true?
A When developing a personal fitness program, it is important to implement strategies that will help
maintain the program as well as give it a successful start
B. Personal factors such as age, health concerns, and likes are important to consider when developing
a personal fitness program
C. The starting skill level of the physical activities included in a personal fitness program should be
determined from other individuals' fitness programs
D. The FITT principle should be used when developing a personal fitness program,
Please select the best answer from the choices provided
A
B
Save and Exit
Next
Answer:
C
Explanation:
The starting skill level of the physical activities included in a personal fitness program should be determined from other individuals' fitness programs is a statement which is not true. Everyone starts their personal fitness journey at a different level which should be regarded . A fitness test should be taken to determine where an individual should start their new lifestyle.
Answer:
C. I got it right :)
Explanation:
this refers to the process of manufacturing that introduced powered machinery to the production of goods
A force of 1000 Newtons is used to push a box on a flat floor. It accelerated at a rate of 5 m/s2. What is the mass of the wagon?
Answer:
67.56kg
Explanation:
Fapp+mg = ma
Fapp= applied force
mg = reactional force
g = acceleration due to gravity
Where g = 9.8m/s^2 a= 5 m/s2, Fapp= 1000N.
1000N = ma + mg
1000N = m( a+g )
1000N = m ( 5+9.8)
1000N = m×14.8
m = 1000÷14.8
m = 67.56kg.
Hence the mass of the wagon will be 67.56kg
What is the critical angle for glass when the refractive index is 1.45
Answer:43.6°
Explanation:
Refractive index=n=1.45
Critical angle=c
n=1/sinc
1.45=1/sinc
Cross multiply
1.45sinc=1
Divide both sides by 1.45
(1.45sinc)/1.45=1/1.45
sinc=0.6897
c=sin(inverse)(0.6897)
c=43.6°
Critical angle is 43.6°
Chef Andy tosses an orange in the air, then catches it again at the same height. The orange is in the air for 0.75\,\text s0.75s0, point, 75, start text, s, end text. We can ignore air resistance.
Answer:
3.68 m/s
Corrected question;
Chef Andy tosses an orange in the air, then catches it again at the same height. The orange is in the air for 0.75 s. We can ignore air resistance. What was the orange's velocity at the moment it was tossed into the air?
Explanation:
Applying the equation of motion;
v = u + at. ....1
Where
u = initial speed
v = final speed
a = acceleration
t = time taken
Given;
Total time of flight t = 0.75s
Acceleration due to gravity g = 9.8 m/s^2
Considering the first phase of flight, during the upward motion to the maximum height. The final velocity at the maximum height is zero and the time of flight of the phase is equal to half of the total flight time.
v1 = 0
t1 = t/2 = 0.75/2 =0.375s
From equation 1;
v1 = u - gt1
Substituting the values;
0 = u - 9.8(0.375)
Solving for u;
u = 9.8(0.375)
u = 3.675
u = 3.68 m/s
Initial velocity = 3.68 m/s
How does increasing the height of the counterweight affect the amount of potential energy of the counterweight?
Answer:
Explanation:
It’s because of gravitational potential energy, the higher the object is from the ground, the more potential energy due to gravity
Which change of state is shown in the model?
condensation
evaporation
sublimation
deposition
Answer:
The correct answer to the following question will be Option C (sublimation).
Explanation:
Sublimation seems to be the process in which a substance or a solid changes its sequence from solid to the gaseous without moving via the form of water.From either the framework or method, we have because the category of phase change seems to be sublimation since there is a material altered to something like the gaseous state throughout the solid.Other options aren't connected to the offer scenario. Therefore the answer to the above is the correct one.
What features of your design helped your rocket hit the target?
Answer:
What features of your design helped your rocket hit the target? (Key factors include the rocket's weight, launch angle, ability to fly straight, and the balloon's pressure.) After testing, what changes did you make to your rocket and launcher? (Answers will vary.)
Explanation:
PLEASE GIVE ME BRAINLIEST IF NEW YOULL SEE NEAR MY ANSWER MARK AS BRAINLIEST IF NOT YOULL HAVE TO WAIT A DAY AND BRAINLY WILL REMIND YOU
Which phrases describe all the outer planets’ motion? Select two options.
no rotation
fast rotation
slow revolution
opposite revolution
north to south rotation
Answer:
Fast rotation
Slow revolution
Explanation:
Solar system has 8 planets. 4 inner rocky planets - Mercury, Venus, Earth and Mars and 4 outer gaseous planets - Jupiter, Saturn, Uranus and Neptune. The outer planets have few common features.
They are gaseous. There period of revolution is larger than the inner planets which means that they have slow revolution about the Sun. One day on the outer planets is smaller than the inner planets which means they have fast rotation.
For example, Jupiter has revolves around sun in 11.86 Earth years and rotates about axis in 9.8 Earth hours. Uranus revolves around sun in 84 Earth years and rotates on its axis 17.9 Earth hours.
Answer:
Fast rotation
Slow revolution
Explanation:
did the test
In an inelastic collision, which of the following statements is always true?
[A] Kinetic energy is conserved in the collision.
[B] Momentum is conserved in the collision.
[C] After the collision, the objects always merge into one.
[D] The collision takes more that 1 second to complete.
Answer: A
Explanation:
A
Whats the voltage supplied by the battery if the resistance is 480 Ohms?
Calculate the energy that 1.5 kg of mass contains
Answer:
[tex]4.5(10)^8[/tex] joules
Explanation:
Mass–energy equivalence is the principle that says that anything that has mass has an equivalent amount of energy. Converse is also true.
The relation between energy and mass is given by [tex]E=mc^2[/tex]
Here, E denotes energy, m denotes mass and c denotes speed of light
Mass [tex](m)=1.5\,\,kg[/tex]
Speed of light (c) = 3 × [tex]10^8[/tex] m/s
Therefore,
[tex]E=1.5(3)(10)^8=4.5(10)^8[/tex] joules.
The S.I. unit of energy is joules which is equal to [tex]1\,\,kg\,\,m^2/s^2[/tex]
canadas largest trading partner is
Answer:
united states
Explanation:
give brainiest please
What is 6.9 × 107 written in standard form?
Answer:
69,000,000
Explanation:
i got it right
An ice skater spins at 2.5 rev/s when his arms are extended. He draws his arms in and spins at 10.0 rev/s. By what factor does his moment of inertia change in the process?
Answer:
The moment of inertia decreased by a factor of 4
Explanation:
Given;
initial angular velocity of the ice skater, ω₁ = 2.5 rev/s
final angular velocity of the ice skater, ω₂ = 10.0 rev/s
During this process we assume that angular momentum is conserved;
I₁ω₁ = I₂ω₂
Where;
I₁ is the initial moment of inertia
I₂ is the final moment of inertia
[tex]I_2 = \frac{I_1 \omega_1}{\omega_2} = \frac{I_1*2.5}{10} \\\\I_2 = 0.25I_1 = \frac{1}{4}I_1[/tex]
Therefore, the moment of inertia decreased by a factor of 4
What is power?
A. a magnitude of a force needed to move an object
B. how much work can be done in a given time
C. the distance over time that an object moves
D, The energy needed to create work
Answer:
The answer is B.
Explanation:
The formula of power is :
[tex]power = \frac{work \: done}{time} [/tex]
* Work done can be "Energy"
2. Identify which condition is NOT a chronic disease
a. diabetes
c. heart
b. cancer
d. cold
3. Identify the single most important component of healt
Answer:
cold
Explanation: a cold is minor the rest are major
Which is closer to the Sun—Mercury or the Earth? A. They are the same distance from the Sun. B. The Earth is closer to the Sun than Mercury is. C. Mercury is closer to the Sun than the Earth is. D. The distance from the Earth to the Sun cannot be determined.
Answer:
the answer is C
Explanation:
I know because mercury is the first planet closest to the sun
