Under certain conditions the rate of this reaction is zero order in ammonia with a rate constant of ·0.0095Ms−1
2NH3 (g) --> N2 (g) + 3H2 (g)
Suppose a 250.mL flask is charged under these conditions with 200. mmol of ammonia. After how much time is there only 100. mmol left? You may assume no other reaction is important. Be sure your answer has a unit symbol, if necessary, and round it to 2 significant digits.
2. The rate at which a certain drug is eliminated by the body follows first-order kinetics, with a half-life of 51 minutes. Suppose in a particular patient the concentration of this drug in the bloodstream immediately after injection is 0.75/μgmL. What will the concentration be 204 minutes later? Round your answer to 2 significant digits.

Number of grams of KCl = 298.2 g.

To calculate the number of grams of KCl produced from 4 mol of KOH in the balanced reaction, the following steps should be followed:

Step 1: Write the balanced chemical equation. The balanced equation is MgCl2 + 2KOH → Mg(OH)2 + 2KCl.

Step 2: Identify the mole ratio of the reactant and product. In the balanced equation, 2 moles of KOH react with 2 moles of KCl.

Step 3: Calculate the number of moles of KCl produced from 4 moles of KOH. We know that the mole ratio of KOH and KCl is 2:2.

Therefore, we can calculate the number of moles of KCl produced by using the following formula:

Number of moles of KCl = (Number of moles of KOH × Mole ratio of KCl and KOH) / Mole ratio of KOH and KClNumber of moles of KCl = (4 × 2) / 2 = 4

Step 4: Convert the number of moles of KCl produced into grams. The molar mass of KCl is 74.55 g/mol.

Number of grams of KCl = Number of moles of KCl × Molar mass of KClNumber of grams of KCl = 4 × 74.55 = 298.2 g.

Therefore, the equation that shows how to calculate how many grams of KCl would be produced from 4 mol of KOH is:Number of grams of KCl = Number of moles of KCl × Molar mass of KCl.Number of grams of KCl = 4 × 74.55 = 298.2 g.

For more such questions on KCl

https://brainly.com/question/16732668

#SPJ8

The compounds formed in the Strecker synthesis from ketones or aldehydes are amino acids, and a Ramachandran plot can visualize the dihedral angles (phi and psi angles) that are formed between the peptide bonds in a protein structure.

In the Strecker synthesis, the compounds that can be formed from ketones or aldehydes are amino acids. Amino acids are organic compounds that contain an amino group (-NH2) and a carboxyl group (-COOH). They are the building blocks of proteins.

A Ramachandran plot, on the other hand, is a graphical representation used to visualize the dihedral angles that are formed between the peptide bonds in a protein structure. These angles are known as phi (Φ) and psi (Ψ) angles. Phi angle refers to the rotation around the alpha carbon (Cα) and the nitrogen (N) atoms, while psi angle refers to the rotation around the alpha carbon (Cα) and the carbon (C) atoms.

In a Ramachandran plot, the x-axis represents the phi angle, and the y-axis represents the psi angle. By plotting the phi and psi angles for each residue in a protein, a Ramachandran plot can provide insights into the overall conformation and stability of the protein structure.

To summarize, the compounds formed in the Strecker synthesis from ketones or aldehydes are amino acids, and a Ramachandran plot can visualize the dihedral angles (phi and psi angles) that are formed between the peptide bonds in a protein structure.

To know more about aldehydes visit-

https://brainly.com/question/30459994

#SPJ11

18. A fluid with a pH of 12 is a base. so, the correct answer is D.

A pH of 12 is basic. Acids have a pH of less than 7, bases have a pH of greater than 7, and neutral substances have a pH of 7.

19. E, the number of protons found in the nucleus of that atom

The atomic number is the number of protons found in the nucleus of an atom. It is unique to each element and determines the chemical properties of that element.

B. water is a polar molecule

Water is a good solvent for salt because it is a polar molecule. Polar molecules have a positive end and a negative end, which allows them to interact with the ions of salt. This interaction is what allows salt to dissolve in water.

Here are some additional information about the topics you asked about:

1. pH is a measure of the acidity or basicity of a solution. It is a scale of 0 to 14, with 7 being neutral. Solutions with a pH of less than 7 are acidic, and solutions with a pH of greater than 7 are basic.

2. The atomic number is a fundamental property of an element. It is the number of protons found in the nucleus of an atom of that element. The atomic number determines the chemical properties of an element.

3. Polarity is a property of molecules that have a positive end and a negative end. This is due to the unequal sharing of electrons between the atoms in the molecule. Polar molecules are attracted to other polar molecules, and they are also attracted to ions.

To learn more about pH click here; brainly.com/question/29766400

#SPJ11

Combustion products at an initial stagnation temperature and pressure of 1800 K and 850 kPa are expanded in a turbine to a final stagnation pressure of 240 kPa with The missing term in the question is "expansion ratio". The expansion ratio is the ratio of the final stagnation pressure to the initial stagnation pressure.

In order to find the expansion ratio, we divide the final stagnation pressure by the initial stagnation pressure. In this case, the final stagnation pressure is 240 kPa and the initial stagnation pressure is 850 kPa. Therefore, the expansion ratio is 240 kPa / 850 kPa ≈ 0.282. Combustion products at an initial stagnation temperature and pressure of 1800 K and 850 kPa are expanded in a turbine to a final stagnation pressure of 240 kPa with an expansion ratio of approximately 0.282.

The expansion ratio is calculated by dividing the final stagnation pressure by the initial stagnation pressure. By substituting the values, we find that the expansion ratio is approximately 0.282. The expansion ratio provides information about how much the pressure decreases during the expansion process. In this case, the combustion products are being expanded in a turbine, which means that the pressure is being reduced. we divide the final stagnation pressure by the initial stagnation pressure. In this case, the final stagnation pressure is 240 kPa. A larger expansion ratio indicates a greater reduction in pressure.

To know more about temperature visit:

https://brainly.com/question/7510619

#SPJ11

The correct option is Mg2+, Sr2+, Ba2+. The set in which all the species have the same number of electrons is Mg2+, Sr2+, Ba2+.

Magnesium (Mg) has 12 electrons, strontium (Sr) has 38 electrons, and barium (Ba) has 56 electrons.

When these elements lose two electrons, they become Mg2+, Sr2+, and Ba2+.

All three of these ions have the same number of electrons, which is 54 electrons.

The electronic configurations of Mg2+, Sr2+, and Ba2+ are shown below:

Mg2+: 1s2 2s2 2p6

Sr2+: 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6

Ba2+: 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6

The correct option is Mg2+, Sr2+, Ba2+.

To know more about electrons visit:

https://brainly.com/question/12001116

#SPJ11

Among the given options, the statement "It determines how much of the surroundings an organism can see" best represents the relationship between eye location, structure, and function. The location of the eyes on an organism's body influences its visual field and the extent to which it can perceive and interact with its surroundings.

The placement of the eyes determines the range of vision and the angle at which the organism can perceive objects. Eyes positioned on the front of the head, such as in humans, provide binocular vision and depth perception, enabling accurate distance estimation and object recognition. In contrast, eyes located on the sides of the head, as seen in many prey animals, offer a wider field of view to detect potential threats. The eye's structure, including the lens, retina, and photoreceptor cells, is adapted to capture and process light stimuli, allowing organisms to gather visual information from their environment. The eye location, therefore, directly influences an organism's ability to navigate, find resources, avoid danger, and interact with other individuals or species in its ecosystem based on visual cues.

For more question on eyes

https://brainly.com/question/21421071

#SPJ8

There are 112.5 grams of water needs to be added to 15g of calcium chloride to create a solution that is 1.2M.

Given Data:Moles of Calcium Chloride (CaCl2)

= 1.2 M Weight of CaCl2

= 15 g

To find:Amount of water to be added.Molar mass of CaCl2

= 40.078 + 35.453 * 2

= 110.984 g/mol Number of moles of CaCl2

= (15 g) / (110.984 g/mol)

= 0.135 molBy definition of molarity, Molarity

= Moles of solute / Volume of solution in litres

=> Volume of solution in litres

= Moles of solute / Molarity

= (0.135 mol) / (1.2 mol/L)

= 0.1125 L

= 112.5 mL Mass of water required

= Volume * Density

= 112.5 mL * 1 g/mL

= 112.5 g.

There are 112.5 grams of water needs to be added to 15g of calcium chloride to create a solution that is 1.2M.

To know more about grams visit:

https://brainly.com/question/30954368

#SPJ11

To calculate the experimental mass percent of barium in the sample, we need to use the following formula:
Experimental Mass Percent = (Mass of Barium / Mass of Sample) x 100

Given that the mass of the barium collected was 0.844 g and the mass of the sample was 1.52 g, we can substitute these values into the formula to calculate the experimental mass percent:
Experimental Mass Percent = (0.844 g / 1.52 g) x 100
Simplifying the equation:
Experimental Mass Percent = 0.555 x 100
Calculating the value:
Experimental Mass Percent = 55.5%
So, the experimental mass percent of barium in the sample is 55.5%. The experimental mass percent of barium in the sample is 55.5%. To calculate the experimental mass percent, we divided the mass of barium collected by the mass of the sample and multiplied the result by 100. This gives us the proportion of barium in the sample, expressed as a percentage. To calculate the experimental mass percent of barium in the sample, we used the formula (Mass of Barium / Mass of Sample) x 100. Given that the mass of barium collected was 0.844 g and the mass of the sample was 1.52 g, we substituted these values into the formula to calculate the experimental mass percent. By dividing 0.844 g by 1.52 g, we obtained the proportion of barium in the sample. Multiplying the result by 100, we converted this proportion into a percentage. The final result, 55.5%, represents the experimental mass percent of barium in the sample. This calculation allows us to quantify the amount of barium present in relation to the total sample mass.

To know more about barium visit:

https://brainly.com/question/2572464

#SPJ11

The number of moles of nitrogen in 40.72 g of (NH4)2CO3 is 0.85 mol.

Given mass of (NH4)2CO3 = 40.72 g

The molecular weight of (NH4)2CO3 can be calculated as:

N = 14.01 * 2

= 28.02H

= 1.01 * 8 = 8.08C

= 12.01O

= 16.00 * 3

= 48.00

Molecular weight of (NH4)2CO3

= 28.02 + 8.08 + 12.01 + 48.00

= 96.11 g/mol

Now, using the formula,Number of moles

= Mass / Molar mass

= 40.72 g / 96.11 g/mol

= 0.4236 mol

When calculated to the correct number of significant figures, the number of moles of nitrogen in 40.72 g of (NH4)2CO3 is equal to 0.85 mol. In the given problem, the mass of (NH4)2CO3 is provided.

We are required to calculate the number of moles of nitrogen contained in it. The molecular weight of (NH4)2CO3 is calculated by adding the atomic weights of all the elements present in it.

The formula for calculating the number of moles is Mass / Molar mass.In this problem, the mass is given in grams and the molecular weight is given in grams per mole, so the result of the calculation will be in moles.

After calculating, we get the number of moles as 0.4236 mol.

Since nitrogen has a molar mass of 14.01 g/mol, the number of moles of nitrogen can be calculated as:

0.4236 mol × 2 mol N / 1 mol (NH4)2CO3

= 0.8472 mol N (rounded to the correct number of significant figures).

To know more about moles visit:-

https://brainly.com/question/15209553

#SPJ11

Answer:

The oxidation number of Na that is neutral is 0

Explanation:

This is because there is no gain or loss of electrons. Sodium, in its ground state, has 11 electrons arranged in three energy levels. Since the atom is electrically neutral, the number of protons in the nucleus (11) is equal to the number of electrons. Therefore, the oxidation number of elemental sodium is 0. This usually applies for any free element that is not an Ion/doesn't has a charge.

The molarity of the solution is approximately 0.156 M. Option A

To find the molarity of the solution, we need to calculate the number of moles of potassium chloride (KCl) and then divide it by the volume of the solution in liters.

The molar mass of KCl is the sum of the atomic masses of potassium (K) and chlorine (Cl), which is 39.10 g/mol + 35.45 g/mol = 74.55 g/mol.

Given that the mass of KCl is 28 grams, we can calculate the number of moles by dividing the mass by the molar mass:

Number of moles = Mass of KCl / Molar mass of KCl

= 28 g / 74.55 g/mol

≈ 0.375 mol

Next, we divide the number of moles by the volume of the solution in liters to find the molarity:

Molarity = Number of moles / Volume of solution (in liters)

= 0.375 mol / 2.4 L

≈ 0.156 mol/L

Option A

For more such question on molarity visit;

https://brainly.com/question/30404105

#SPJ8

The procedure that involves a physical change in one of the substances is separating oil from a solution by cooling it.

When separating oil from a solution by cooling it, the process relies on the difference in solubility between the oil and the solvent at different temperatures. By cooling the solution, the solubility of the oil decreases, causing it to separate and form distinct layers. This separation is a physical change because the chemical composition of the oil remains the same; only the physical state and location of the oil within the solution change. The cooling process allows the oil to undergo a phase change from a dissolved state to a separate liquid phase.

Hence, the physical change is discussed above.

Learn more about physical change here:

https://brainly.com/question/28742279

#SPJ 4

The volume of the 12.25 g sample of a substance that has a density of 20.45 g/mL is 0.6 mL.

Given, mass of the substance = 12.25 g

Density of the substance = 20.45 g/mL

We need to calculate the volume of the given substance.

Solution:

We know that the formula to calculate volume is as follows:

Volume = mass / density

Substituting the given values in the formula we get,

Volume = 12.25 g / 20.45 g/mL

= 0.6 mL

Therefore, the volume of the 12.25 g sample of a substance that has a density of 20.45 g/mL is 0.6 mL.

To know more about volume visit:

https://brainly.com/question/28058531

#SPJ11

Deforestation is an example of a human activity that can alter chemical cycles, specifically the carbon cycle. Deforestation refers to the permanent removal or clearing of forests or wooded areas, typically for human activities such as agriculture, logging, urban expansion, or the establishment of infrastructure.

When forests are cleared or destroyed through deforestation, the vegetation and organic matter in the forests are often burned or decomposed. This process releases a significant amount of carbon dioxide (CO2) into the atmosphere. Trees play a crucial role in the carbon cycle as they absorb CO2 through photosynthesis and store carbon in their biomass and soil. By removing forests, the natural carbon sink is diminished, and the balance of carbon dioxide in the atmosphere is disrupted.

Additionally, deforestation can lead to increased soil erosion. Without the tree roots and vegetation to hold the soil in place, erosion can occur more easily. This can result in the loss of valuable nutrients from the soil, such as nitrogen and phosphorus, which are essential for plant growth. The altered chemical composition of the soil affects nutrient cycling and availability for both plants and other organisms.

Overall, deforestation disrupts the natural balance of the carbon cycle and nutrient cycles, contributing to increased greenhouse gas emissions and nutrient depletion in ecosystems. It highlights how human activities can have significant impacts on chemical cycles and the functioning of ecosystems.

To know more about carbon cycle, click here, https://brainly.com/question/30508567

#SPJ11

The given hydrocarbon, 5,7-diethyl-2,4,10-trimethylundecane is labeled as follows:First, the longest carbon chain that contains all substituents should be selected. Here, the longest carbon chain containing all substituents has eleven carbon atoms. Therefore, the parent chain should contain 11 carbon atoms.Number the carbons in the chain starting from the end nearest a substituent, which in this case is the end nearest to the 2-methyl group.

Number the carbons in the main chain as shown below:1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11After numbering the carbon atoms, the structure of the given hydrocarbon is as follows:2. The substituent should be given the lowest number possible. The direction in which the numbers should be assigned is based on the rule that the carbons should be numbered to provide the smallest possible numbers for the substituents.

Here, the 5 and 7 positions are the positions for ethyl groups; therefore, the name of the compound is 5,7-diethyl-2,4,10-trimethylundecane, not 4,6-diethyl-2,4,10-trimethylundecane. This is because the numbers 5 and 7 are smaller than the numbers 4 and 6.Hence, the correct name of the hydrocarbon is 5,7-diethyl-2,4,10-trimethylundecane.

To know more about hydrocarbon visit:-

https://brainly.com/question/30666184

#SPJ11

6.47 kJ of heat is absorbed when 2.86 g of water boils at atmospheric pressure.

Given that the heat of vaporization of water is 40.66 kJ/mol.

To find how much heat is absorbed when 2.86 g of water boils at atmospheric pressure, we can use the following steps.

Step 1: Calculate the number of moles of water using the given mass, m = 2.86 g.

The molar mass of water is 18 g/mol.

n = m/M

= 2.86/18

= 0.159 moles

Step 2: Use the molar heat of vaporization to find the heat absorbed. The heat absorbed is given by

q = n x ΔHv

where ΔHv is the molar heat of vaporization.

q = 0.159 × 40.66 kJ/mol

= 6.47 kJ (rounded to two decimal places)

Therefore, 6.47 kJ of heat is absorbed when 2.86 g of water boils at atmospheric pressure.

To know more about pressure visit:

https://brainly.com/question/32099691

#SPJ11

The solution that would be expected to contain the greatest number of solute particles is 1 liter of 1.0 m NaCl. Option C is the correct answer.

Ionic compounds are chemical compounds composed of ions held together by electrostatic forces of attraction between oppositely charged ions.

When an ionic compound such as NaCl is placed in water, the component atoms of the NaCl crystal dissociate into individual sodium ions ([tex]\rm Na^+[/tex]) and chloride ions ([tex]\rm Cl^-[/tex]).

To determine which of the solutions would be expected to contain the greatest number of solute particles, we need to consider the number of solute particles produced by each molecule of the solute.

NaCl dissociates in water to produce two solute particles ([tex]\rm Na^+[/tex]and [tex]\rm Cl^-[/tex]), while glucose does not dissociate and therefore produces only one solute particle. Therefore, 1 liter of 1.0 m NaCl would contain twice as many solute particles as 1 liter of 1.0 m glucose.

In conclusion, 1 liter of 1.0 m NaCl solution would be expected to contain the greatest number of solute particles. The correct answer is option C.

Learn more about Ionic compounds here:

https://brainly.com/question/30420333

#SPJ4

The given question is in inappropriate manner. The correct question is:

When an ionic compound such as sodium chloride (NaCl) is placed in water, the component atoms of the NaCl crystal dissociate into individual sodium ions and chloride ions. In contrast, the atoms of covalently bonded molecules (e.g., glucose, sucrose, glycerol) do not generally dissociate when placed in aqueous solution. which of the following solutions would be expected to contain the greatest number of solute particles (molecules or ions)?

a. 1 liter of 1.0 m glucose  

b. 1 liter of 0.5 m NaCl

c.  1 liter of 1.0 m NaCl

d. 1 liter of 1.0 m NaCl and 1 liter of 1.0 m glucose will contain equal numbers of solute particles.

The reaction of 1-ethylcycloheptene with MCPBA (meta-chloroperoxybenzoic acid) followed by sodium methoxide in methanol leads to the formation of an epoxide.

MCPBA is a peracid that is commonly used to convert alkenes into epoxides through an epoxidation reaction. It adds an oxygen atom to the double bond of the alkene, resulting in the formation of an oxirane ring.

In this case, when 1-ethylcycloheptene reacts with MCPBA, an epoxide is formed. The specific product will depend on the regiochemistry and stereochemistry of the starting compound. Without further information on the exact structure and conditions of the reaction, it is difficult to determine the exact product.

However, the general product can be represented as an epoxide derived from 1-ethylcycloheptene:

Epoxide

1−ethylcycloheptene+MCPBA+NaOMe/MeOH→Epoxide

The exact position and stereochemistry of the epoxide ring would be determined by the specific structure of 1-ethylcycloheptene and the reaction conditions used.

For more such questions on sodium methoxide

https://brainly.com/question/31237886

#SPJ4

Plugging in the values, we get:r = √((9 × 10⁹ N⋅m²/C² * 1 * 1.6 × 10⁻¹⁹ C) / (8.26 × 10⁻¹⁸ J/atom)) = 2.19 × 10⁻¹⁰ m = 2.19 Å

Therefore, the average distance between the sodium nucleus and the 3s electron is 2.19 Å.

Answer: 2.19 Å (angstroms).

Coulomb's law states that the electrostatic force between two electrically charged particles is proportional to the product of their charges and inversely proportional to the square of the distance between them. It is given by:

F = (k * q₁ * q₂)/r²

Where F is the force between the particles, q₁ and q₂ are their charges, r is the distance between them, and k is Coulomb's constant.

To find the average distance between the sodium nucleus and the 3s electron, we need to assume that the force between them is equal to the electrostatic attraction between the positively charged nucleus and the negatively charged electron.

Let's assume that the charge on the nucleus is +1 and the charge on the electron is -1.6 × 10⁻¹⁹ C (the charge of an electron). We also know that the first ionization energy of sodium is 496 kJ/mol, which is the amount of energy required to remove an electron from a mole of sodium atoms.

Since the molar mass of sodium is 23 g/mol, we can calculate the energy required to remove one electron as follows:

496 kJ/mol ÷ 23 g/mol

= 21.57 kJ/g

This means that it requires 21.57 kJ of energy to remove one electron from one gram of sodium.

To calculate the electrostatic force between the sodium nucleus and the 3s electron, we need to convert the first ionization energy into joules and divide it by Avogadro's number to get the energy required to remove one electron from one atom:

496 kJ/mol ÷ (6.022 × 10²³ atoms/mol) × 1000 J/kJ

= 8.26 × 10⁻¹⁸ J/atom

The force between the nucleus and the electron is equal to the energy required to remove the electron divided by the average distance between them, so:

F = (k * q₁ * q₂)/r²r

= √((k * q₁ * q₂)/F)

where k is Coulomb's constant (9 × 10⁹ N⋅m²/C²), q₁ is the charge on the nucleus (+1), q₂ is the charge on the electron (-1.6 × 10⁻¹⁹ C), and

F is the force between them (8.26 × 10⁻¹⁸ J/atom).

Plugging in the values, we get:r

= √((9 × 10⁹ N⋅m²/C² * 1 * 1.6 × 10⁻¹⁹ C) / (8.26 × 10⁻¹⁸ J/atom))

= 2.19 × 10⁻¹⁰ m

= 2.19 Å

Therefore, the average distance between the sodium nucleus and the 3s electron is 2.19 Å. Answer: 2.19 Å (angstroms).

To know more about distance visit:

https://brainly.com/question/31713805

#SPJ11

The required volume of 6M acetic acid (CH3COOH) that reacts with 0.5g of sodium bicarbonate (NaHCO3) is 0.035ml .

Firstly we need to understand the chemical reaction between acetic acid and sodium bicarbonate

CH3COOH + NaHCO3 --------> CH3COONa + H2O + CO2

From the equation we can say that the mole ratio between the NaHCO3 and CH3COOH is 1:1 and as we had given that the mass of sodium bicarbonate is 0.5g , we can calculate the number of moles of sodium bicarbonate that are able to react with 6M acetic acid .

Hence no. of moles of sodium bicarbonate is

               [tex]0.5g X \frac{ mole}{molar mass}[/tex]

The molar mass of NaHCO3 is 23 +1+12+(16x3) = 84 g/mol

Hence the no. of moles  =  [tex]\frac{0.5 g}{84 g/mol}[/tex]

                                          =  0.0059 moles

Therefore the volume of 6M acetic acid is

0.0059 moles X 1000 ml X [tex]\frac{6M}{1000ml}[/tex]

                0.0059 X 6 = 0.035 ml

Therefore the required volume is 0.035ml of 6M acetic acid that fully reacts with 0.5g of sodium bicarbonate

Learn more about acetic acid

https://brainly.com/question/13064702

#SPJ4

Fischer projections are two-dimensional representations of three-dimensional organic molecules. The carbon chain in the Fischer projection is vertical and the carbonyl group is at the top. On the other hand, the amino group is placed at the bottom right. A horizontal line is used to denote bonds that extend out of the plane of the paper, whereas vertical bonds are placed behind the plane of the paper.

Below are the Fischer projections of the 20 amino acids with the R group on top, along with their functional group:

1. Histidine


Functional group: Basic (imidazole)

2. Isoleucine


Functional group: Nonpolar (alkyl)

3. Leucine


Functional group: Nonpolar (alkyl)

4. Lysine


Functional group: Basic (amino)

5. Methionine


Functional group: Nonpolar (alkyl sulfide)

6. Phenylalanine


Functional group: Nonpolar (aromatic)

7. Threonine


Functional group: Polar (alcohol)

8. Tryptophan


Functional group: Nonpolar (aromatic)

9. Valine


Functional group: Nonpolar (alkyl)

10. Alanine


Functional group: Nonpolar (alkyl)

11. Asparagine


Functional group: Polar (amide)

12. Aspartic Acid


Functional group: Acidic (carboxylic acid)

13. Glutamic Acid


Functional group: Acidic (carboxylic acid)

14. Serine


Functional group: Polar (alcohol)

15. Arginine


Functional group: Basic (guanidine)

16. Cysteine


Functional group: Polar (thiol)

17. Glutamine


Functional group: Polar (amide)

18. Glycine


Functional group: Nonpolar (H)

19. Proline


Functional group: Nonpolar (cyclic)

20. Tyrosine


Functional group: Polar (aromatic alcohol)

to know more about amino acids visit:

https://brainly.com/question/31872499

#SPJ11

One example of nucleophilic addition to an aldehyde or ketone is the reaction between ethanal (acetaldehyde) and hydrogen cyanide (HCN). The reaction involves the nucleophilic addition of HCN to the carbonyl carbon atom of ethanal to form 2-hydroxyethanenitrile, also called lactonitrile or glycolonitrile.

Reaction:

Ethanal + HCN → 2-hydroxyethanenitrile

Products:

2-hydroxyethanenitrile

Typical yield: The typical yield of the reaction is 60-70%.

Uses or applications:

2-hydroxyethanenitrile can be used to prepare various organic compounds such as α-hydroxy carboxylic acids, α-amino acids, α-hydroxy ketones, and α-hydroxy aldehydes. It can also be used to synthesize various intermediates for the pharmaceutical industry.

The reaction between ethanal and hydrogen cyanide can be useful in preparing α-hydroxy acids and various pharmaceutical intermediates.

To know more about nucleophilic visit:

https://brainly.com/question/32761121

#SPJ11

The calcium hardness of your friend's pool water is below the recommended range.

The CaCO3 concentration of 175 mg/L can be used to compare to the Ca2+ guideline to determine whether the calcium hardness is in the recommended range or not.

Calcium hardness (Ca2+) in swimming pool water is measured using CaCO3.

The recommended Ca2+ range for pool water is between 200-400 mg/L CaCO3.

However, we are given that the concentration of CaCO3 is 175 mg/L.

To determine whether the calcium hardness of your friend's pool water is in the recommended range, you must first convert CaCO3 to Ca2+.

The molecular weight of CaCO3 is 100.09 g/mol while that of Ca2+ is 40.08 g/mol.

Therefore, we must multiply the concentration of CaCO3 by the ratio of the two molecular weights.

(175 mg/L CaCO3) x (1 mmol/1000 mg) x (1 Ca2+/1 mmol) x (40.08 g/mol Ca2+) = 7.01 mg/L Ca2+

Now that we know the concentration of Ca2+ in the pool water, we can compare it to the recommended range of 200-400 mg/L CaCO3.7.01 mg/L is less than the minimum recommended range of 200-400 mg/L CaCO3.

To know more about calcium hardness visit;

https://brainly.com/question/13163632

#SPJ11

The correct equation for the average atomic mass is:A = [(atomic mass of 12X) * (percent abundance of 12X/100)] + [(atomic mass of 132X) * (percent abundance of 132X/100)]Substituting this into the previous equation and solving for y again, we get:y ≈ 94.19%Thus, the percent abundance of 132X is approximately 94.19%.

Let's assume that the percent abundance of isotope 12X is x, and the percent abundance of isotope 132X is y.

Thus, if we add x and y together, we get 100%.We will first write out the equation for the average atomic mass, which can be given as the sum of the atomic mass of each isotope multiplied by its percent abundance:

A = [(atomic mass of 12X) * (percent abundance of 12X)] + [(atomic mass of 132X) * (percent abundance of 132X)]

We have been provided with the average atomic mass, A = 130.79amu, and we know that the atomic mass of 12X is 12.

Thus, we can substitute these values into the equation:

130.79amu = (12amu)(x) + (132amu)(y)

Simplifying the above expression, we can obtain the following equation:

0.79amu = (132amu)(y) - (12amu)(x)

We know that x + y = 100,

which means that x = 100 - y.

Thus, we can substitute this value into the above equation:

0.79amu = (132amu)(y) - (12amu)(100 - y)

Expanding and simplifying the above expression, we get:

7.9 = 120y - 1200y + 12y7.9 = 12y - 1080y7.9 = -1068y

Dividing both sides by -1068, we get:

y ≈ -0.0074

If we convert this into a percentage, we get:

y ≈ -0.74%Since y represents the percent abundance of isotope 132X, which cannot be negative, we know that this answer is extraneous. This means that we have made a mistake somewhere along the line. If we go back to the equation for the average atomic mass, we can see that we have made an error. We forgot to divide each percent abundance by 100.  

To know more about atomic mass visit:-

https://brainly.com/question/29117302

#SPJ11

Answer:

The percent abundance of 132X is 59.66%.

Explanation:

The percent abundance of 132X can be calculated using the following formula:

Percent abundance of 132X = (Average atomic mass - Mass of 129X) / (Mass of 132X - Mass of 129X) * 100%

In this case, the average atomic mass of X is 130.79 amu, the mass of 129X is 129 amu, and the mass of 132X is 132 amu.

Percent abundance of 132X = (130.79 - 129) / (132 - 129) * 100% = 1.79 / 3 * 100% = 59.66%

Therefore, the percent abundance of 132X is 59.66%.

Here is the explanation of the steps involved in the calculation:

1. The average atomic mass of X is calculated by averaging the masses of the two isotopes.

2. The difference between the average atomic mass and the mass of 129X is calculated. This difference represents the mass of the 132X isotope.

3. The difference between the masses of the two isotopes is divided by the mass of the 132X isotope.

The result is multiplied by 100% to express the answer as a percentage.

To prepare a 250 mL solution of 3.00 m acetic acid, Shelby should dissolve 45.04 grams of acetic acid in distilled water while stirring until the total volume reaches 250 mL.

To prepare 250 mL of a 3.00 m acetic acid (CH₃COOH) solution, Shelby can follow the following procedure:

1. Calculate the required mass of acetic acid:

molarity (M) = moles (mol) / volume (L)

Rearranging the formula, moles = M × volume (L)

Moles of acetic acid = 3.00 mol/L × 0.250 L = 0.750 mol

2. Determine the molar mass of acetic acid:

Molar mass of CH₃COOH = (12.01 g/mol × 2) + (1.01 g/mol × 4) + (16.00 g/mol) + (1.01 g/mol)

= 60.05 g/mol

3. Calculate the mass of acetic acid required:

Mass (g) = moles × molar mass

Mass of acetic acid = 0.750 mol × 60.05 g/mol = 45.04 g

4. Measure 45.04 grams of acetic acid using an analytical balance.

5. Transfer the measured acetic acid to a container and add distilled water gradually while stirring until the total volume reaches 250 mL.

By following these steps, Shelby can prepare a 250 mL solution of 3.00 m acetic acid. It is essential to ensure accurate measurements and proper mixing to achieve the desired concentration.

learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ4

The correct name for S2Cl2 is disulfur dichloride. S2Cl2 is a chemical compound composed of two sulfur atoms (S) and two chlorine atoms (Cl).

S2Cl2 is a chemical compound composed of two sulfur atoms (S) and two chlorine atoms (Cl). When naming this compound, we use the rules of chemical nomenclature to assign an appropriate name based on the elements present and their respective oxidation states.

In the case of S2Cl2, the prefix "di-" is used to indicate the presence of two sulfur atoms. The word "sulfur" is used instead of "sulfide" since the compound contains two sulfur atoms that are covalently bonded together. The suffix "-ide" is used for the chlorine atoms, indicating their status as anions.

Putting it all together, the name for S2Cl2 is "disulfur dichloride." This name accurately reflects the composition of the compound, indicating the presence of two sulfur atoms and two chlorine atoms.

To know more about disulfur dichloride here: brainly.com/question/29153071

#SPJ11

Based on the information we can infer that substance z is an example of an element, substances x and t are examples of compounds, and substance y is an example of a mixture.

To identify the classification of each substance we must take into account the image. In the image we see atoms of each element that are distinguished by different colors. In the case of red and blue atoms, they are examples of compounds because they are two different elements.

On the other hand, atoms of the same color form particles of a specific element. From the above we can infer that substance z is an example of an element, substances x and t are examples of compounds, and substance y is an example of a mixture.

Learn more about compounds in: https://brainly.com/question/14117795

#SPJ1

The boiling point of the solution is 102.05 °C.

To find the boiling point elevation of the solution, we need to use the formula: ΔTb = Kb * m where: ΔTb = boiling point elevation

Kb = boiling point elevation constant (0.512 °C•kg/mol for water)

m = molality of the solution

First, we need to find the molality of the solution. Molality (m) is defined as the moles of solute per kilogram of solvent.

We can find the moles of ethylene glycol using its molar mass:

moles of ethylene glycol = mass of ethylene glycol / molar mass of ethylene glycol = 6.21 g / 62.1 g/mol = 0.1 mol

Next, we calculate the molality: molality (m) = moles of solute / mass of solvent (in kg) = 0.1 mol / 25.0 g / 1000 = 4 mol/kg

Now, we can calculate the boiling point elevation: ΔTb = 0.512 °C•kg/mol * 4 mol/kg = 2.048 °C

Finally, we add the boiling point elevation to the boiling point of pure water to find the boiling point of the solution:

Boiling point of solution = boiling point of pure water + ΔTb = 100.00 °C + 2.048 °C = 102.05 °C

Therefore, the boiling point of the solution is 102.05 °C.

Know more about boiling point:

https://brainly.com/question/2153588

#SPJ4

The ranking of the compounds from highest boiling point to lowest boiling point is: Hexanoic acid > 1-Hexanol > Hexane > n-Hexanal.

Intermolecular forces depend on molecular weight, polarity, hydrogen bonding, and functional groups. The compounds are ordered by boiling point:

Hydrogen bonding and polarity make hexanoic acid the highest boiling chemical.

1-Hexanol, which forms hydrogen bonds, has the second highest boiling point.

Since it does not form hydrogen bonds, nonpolar hexane has a lower boiling point than hexanoic acid and 1-hexanol.

Since it is nonpolar and lacking hydrogen bonding functional groups, n-Hexanal has the lowest boiling point.

Learn more about boiling point, here:

https://brainly.com/question/28403505

#SPJ4

The infusion rate for administering 25,000 units of heparin in 250 ml of d5w at a rate of 1000 units per hour is 10 ml/hr.

To calculate the infusion rate in ml/hr, we need to find out how many ml of the heparin solution will be infused per hour.

First, we need to determine how many units of heparin are in 1 ml of the solution: 25,000 units ÷ 250 ml = 100 units/ml

Now, we can calculate the infusion rate in ml/hr:

1000 units/hr ÷ 100 units/ml = 10 ml/hr

Therefore, the infusion rate for administering 25,000 units of heparin in 250 ml of d5w at a rate of 1000 units per hour is 10 ml/hr.

Know more about infusion rate:

https://brainly.com/question/28790508

#SPJ4