Upon completing an interview, it is important that you send a follow-up thank you
note/letter/e-mail because it will show that you are a person who appreciates an opportunity.
A True
B
False

Answers

Answer 1
A True it shows that you are very grateful for the opportunity and it shows that you really would like the job and you’re not just doing it for the money even if you are. Also it just shows professionalism
Answer 2
A, it makes you seem like your a better person and grateful for the opportunity you have.

Related Questions

Typhoon signal number 2 is raised. What is the speed of the expected typhoon?​

Answers

the simple answer is from 61kmph to 120kmph

Explanation:

no explanation is needed

NASA is giving serious consideration to the concept of solar sailing. A solar sailcraft uses a large, low mass sail and the energy and momentum of sunlight for propulsion. (a) Should the sail be absorbing or reflective

Answers

Answer:

Reflective

Explanation:

The radiation pressure of the wave that totally absorbed is given by;

[tex]P_{abs}= \frac{I}{C}[/tex]

and While the radiation pressure of the wave totally reflected is given by;

[tex]P_{ref}= \frac{2I}{C}[/tex]

Now compare the two-equation you can clearly see that the pressure due to reflection is larger than absorption therefore the sail should be reflective.

Which is the definition of refraction?

1)the blocking of light waves vibrating in a particular plane

2) the bending of a light wave as it passes at an angle from one medium to another

3) a false or distorted image causing the gradual distortion of light through hot air

the redirection of light by tiny particles as it passes through a medium

Answers

Answer:

2) The bending of a light wave as it passes at an angle from one medium to another .

Hope it is helpful to you ☺️

Four equal-value resistors are in series with a 5 V battery, and 2.23 mA are measured. What isthe value of each resistor

Answers

Answer:

560.54 Ω

Explanation:

Applying,

V = IR'............... Equation 1

Where V = Voltage of the battery, I = currrent, R' = Total resistance of the resistors

make R' the subject of the equation

R' = V/I............ Equation 2

From the question,

Given: V = 5 V, I = 2.23 mA = 2.23×10⁻³ A

Substitute these values into equation 2

R' = 5/(2.23×10⁻³ )

R' = 2242.15 Ω

Since the fours resistor are connected in series and they are equal,

Therefore the values of each resistor is

R = R'/4

R = 2242.15/4

R = 560.54 Ω

A 55-kg block, starting from rest, is pushed a distance of 5.0 m across a floor by a horizontal force Fp whose magnitude is 140 N. Fp is parallel to the displacement of the block. The final speed of the block is 2.35 m/s.
a) How much work was converted to thermal energy? What work did friction do on the box?
b) What is the coefficient of friction?

Answers

Answer:

The answer is "151.25 J and -547.64 J".

Explanation:

[tex]u = 0\\\\v = 2.35\ \frac{m}{sec}\\\\d = 5.0 \ m\\\\[/tex]

Using formula:

[tex]v^2 = u^2 + 2 \times a \times d\\\\2.35^2 = 0^2 + 2 \times a \times 5\\\\a = \frac{2.35^2}{10} \\\\[/tex]

   [tex]= 0.55 \ \frac{m}{sec^2}\\\\[/tex]

[tex]F_{net} = m \times a\\\\F_{net} = 55 \times 0.55 = 30.25\ N\\\\[/tex]

Calculating the Work by net force

[tex]W = F_{net}\times d\\\\W = 30.25 \times 5 = 151.25 \ J\\\\[/tex]

The above work is converted into thermal energy.

Now,

[tex]F_{net} = F_p - F_f\\\\F_p = 140 \ N\\\\F_f = u_k\times m \times g = u_k \times 55 \times 9.81\\\\F_f = 539.55 \times u_k\\\\30.25 = 140 - u_k \times 55 \times 9.81\\\\u_k = \frac{(140 - 30.25)}{(55\times 9.81)}\\\\uk = 0.203 = \text{Coefficient of friction}\\\\W_f = -F_f \times d\\\\W_f = -0.203 \times 55 \times 9.81 \times 5\\\\Work\ done\ by\ friction = -547.64 \ J[/tex]

Astronauts in space move a toolbox from its initial position ????????→=<15,14,−8>m to its final position ????????→=<17,14,−1>m. The two astronauts each push on the box with a constant force. Astronaut 1 exerts a force ????1→=<18,7,−12>???? and astronaut 2 exerts a force ????2→=<16,−10,16>????.

Required:
What is the total work performed on the toolbox?

Answers

If both forces are measured in Newtons, then the net force is

F = (18, 7, -12) N + (16, -10, 16) N = (34, -3, 4) N

The toolbox undergoes a displacement (i.e. change in position) in the direction of the vector

d = (17, 14, -1) m - (15, 14, -8) m = (2, 0, -9) m

The total work done by the astronauts on the toolbox is then

F • d = (34, -3, 4) N • (2, 0, -9) m = (68 + 0 - 36) N•m = 32 J

The work done by the two astronauts is equal to 96 J.

What is work done?

work done?Work done is defined as the product of force applied and the distance moved by the force.

Work done = Force × Distance

The forces applied = 18+16 N, 7+ -10 N, and -12 + 16N

Forces = 34 N, -3 N, and 4N

Distances = (17 - 15, 14 - 14, -1 - - 8) m

Distances = 2, 0, 7

Work done = 34 × 2 + -3 × 0 + 4 × 7

Work done = 96 J

Therefore, the work done by the two astronauts is equal to 96 J.

Learn more about work done at: https://brainly.com/question/25573309

#SPJ6

A 9.0 V battery is connected across two resistors in series. If the resistors have resistances of and what is the voltage drop across the resistor?
Select one:

A. 4.6 V B. 9.4 V C. 8.6 V D. 4.4 V​

Answers

Answer:

the answer to the question is known as D

collisions may take place between​

Answers

Answer:

Collisions may take place between the reactants.

Explanation:

The collision frequency must be greater than the frequency factor for the reaction. A collision between the reactants must occur.

A particle of mass 1.2 mg is projected vertically upward from the ground with a velocity of 1.62 x 10 cm/h. Use the above information to answer the following four questions: 7. The kinetic energy of the particle at time t = 0 s is A. 1.215 x 10-3 J B. 2.430 J C. 1215 J D. 9.72 x 106 J E. OJ (2)​

Answers

Answer:

K = 0 J

Explanation:

Given that,

The mass of the particle, m = 1.2 mg

The speed of the particle, [tex]v=1.62\times 10\ cm/h[/tex]

We need to find the kinetic energy of the particle at time t = 0 s.

At t = 0 s, the particle is at rest, v = 0

So,

[tex]K=\dfrac{1}{2}mv^2[/tex]

If v = 0,

[tex]K=0\ J[/tex]

So, the kinetic energy of the particle at time t = 0 s is 0 J.

Which image illustrates reflection?
A
B
с
D

Answers

Answer: I beleive A

Explanation:

Answer:

A

Explanation:

We can see the light being reflected off the mirror.

convert 2.4 milimetres into metre​

Answers

0.0024

Milimetres are before centimetres and centimetres are before metres

Answer: 2.4 millimeters = 0.0024 meters

Explanation: A millimeter is 1/1000 of a meter. By diving 2.4 by 1000, you get 0.0024.

George Frederick Charles Searle

Answers

Answer:

George Frederick Charles Searle FRS was a British physicist and teacher. He also raced competitively as a cyclist while at the University of Cambridge. Wikipedia

Explanation:

GIVE BRAINLIST

Wwwwwwwwwwwwwwwwwwwwwwwwwwwwww

One hazard of space travel is the debris left by previous missions. There are several thousand objects orbiting Earth that are large enough to be detected by radar, but there are far greater numbers of very small objects, such as flakes of paint. Calculate the force exerted by a 0.100-mg chip of paint that strikes a spacecraft window at a relative speed of 4.00×10^3 m/s, given the collision lasts 6.00×10^8s.

Answers

Answer:

F = 6666.7 N

Explanation:

Given that,

Mass of a chip, m = 0.1 mg

Initial speed, u = 0

Final speed,[tex]v=4\times 10^{3}\ m/s[/tex]

Time of collision,[tex]t=6\times 10^{-8}\ s[/tex]

We know that,

Force, F = ma

Put all the values,

[tex]F=\dfrac{m(v-u)}{t}\\\\F=\dfrac{0.1\times 10^{-6}\times (4\times 10^3-0)}{6\times 10^{-8}}\\\\F=6666.7\ N[/tex]

So, the required force is 6666.7 N.

1. Draw four illustrations of a globe and paper that are positioned to yield equatorial, transverse, oblique, and polar aspect projections. Label the equator in each. Use your textbook or lecture material if you need a reference.2. On any map, why is there distortion at areas that do not fall on lines of tangency or secancy?

Answers

Answer:

1) attached below

2) assumption that the earth is spherical

Explanation:

1) Four illustrations of a globe

attached below

2) Reason for distortions at areas that do not fall on lines of tangency or secancy

The reason for distortion on areas outside the lines of tangency or secancy is because of the assumption that the earth is spherical which is not true hence map projections on the areas that fall on the lines of tangency do not experience distortion and are true

How many neutrons are in an isotope of selenium-83

A. 34
B. 83
C. 49
D. 117

Answers

Answer:

C.49 is yr ans...

hope it helpsstay safe healthy and happy....
I am pretty sure it is 49.

a vehicle start moving at 15m/s. How long will it take to stop at a distance of 15m?​

Answers

Speed= distance/time

Or time = distance/speed

According to your question

Speed=15m/s

and. Distance=1.2km. ,we must change kilometer in meter because given speed is in m/s

D= 1.2km = 1.2×1000m =1200meter

Time = distance/ speed

1200/15 =80second

Or. 1min and 20 sec will be your answer.

2. How do the phytochemicals present in various foods help us?

Answers

Answer:

Phytochemicals are compounds that are produced by plants ("phyto" means "plant"). They are found in fruits, vegetables, grains, beans, and other plants. Some of these phytochemicals are believed to protect cells from damage that could lead to cancer.

what is the time taken by moving body with acceleration 0.1m/s2 if the initial or finak velocities are 20m/s and 30m/s respectively?​

Answers

Answer:

t= 100s

Explanation:

use v=v0+at

plug in givens and solve for t

30=20+0.1*t

t= 100s

Question 8 of 10
What was the name of the book that Ibn al-Haytham wrote?
A. Weather and Air Flow
B. Book of Optics
C. Light and Vision
D. Book of Sound

Answers

Answer:b

Explanation:

It takes 20 Joules of Work to push 4 coulombs of charges Across the filament of a bulb.'find the potential difference Across the filament​

Answers

Answer:

V = 5 Volts

Explanation:

Given the following data;

Work done = 20 Joules

Charge = 4 Coulombs

To find the potential difference;

Mathematically, the work done in moving a charge is given by the formula;

W = qv

Where;

W is the work done

q is the quantity of charge

v is the potential difference

Substituting we have;

20 = 4 * v

V = 20/4

V = 5 Volts




A student claimed that thermometers are useless because a
thermometer always registers its own temperature. How would you
respond?
[

Answers

the thermometer is the temperature that is around it so its registering the temperature its supposed to

What is the escape speed on a spherical asteroid whose radius is 517 km and whose gravitational acceleration at the surface is 0.636 m/s2

Answers

Answer:

810.94 m/s

Explanation:

Applying,

v = √(2gR)............. Equation 1

Where v = escape velocity of the spherical asteroid, g = acceleration due to gravity, R = radius of the earth

From the question,

Given: g = 0.636 m/s², R = 517 km = 517000 m

Substitute these values into equation 1

v = √(2×0.636×517000)

v = √(657624)

v = 810.94 m/s

Hence, the escape velocity is 810.94 m/s

A scientist who studies fossils of ancient life forms .O ornithologist O Paleontologist O Ichthyologist O Marine Biologist .

Hurry !! First one to answer gets points !

Answers

Answer:

paleontologist

Explanation:

Paleontologists are scientists that investigate the fossils of extinct life forms. Thus, the correct option is B.

What is Fossil?

A fossil is defined as the preserved trace, imprint, or proof of a once-living entity from a past geological era. Exoskeletons, bones, shells, impressions of animals or microbes in stone, objects preserved in amber, hair, petrified wood, and genetic traces are a few examples. The collection of all the fossils is called as the fossil record.

An organism from a past geologic era that has been preserved in the Earth's crust is referred to as a fossil. Paleontologists are scientists that investigate the fossils of extinct life forms. The intricate system of fossil records is the main source of information about the evolution of life on Earth.

Therefore, the correct option is B.

Learn more about Fossils, here:

https://brainly.com/question/5431129

#SPJ7

What is the effect on range and maximum height of a projectile as the launch height, launch speed, and launch angle are increased?

Answers

Answer:

The highest point in the trajectory occurs at the midpoint of the path. This highest point increases as the angle increases. At a 75° launch angle, the maximum height is approximately 76 meters. However, a further increase in launch angle beyond this 75° angle will increase the peak height even more.

A resident of a lunar colony needs to have her blood pressure checked in one of her legs. Assume that we express the systemic blood pressure as we do on earth and that the density of blood does not change. Suppose also that normal blood pressure on the moon is still 120/80 (which may not actually be true).

Required:
If a lunar colonizer has her blood pressure taken at a point on her ankle that is 1.5 m below her heart, what will be her systemic blood-pressure reading, expressed in the standard way, if she has normal blood pressure? The acceleration due to gravity on the moon is 1.67 m/s^2

Answers

Answer:

The pressure is 2505 Pa.  

Explanation:

Height, h = 1.5 m

density of blood, d = 1000 kg/cubic meter

Gravity, g = 1.67 m/s^2

let the pressure is P.  

The pressure due to the fluid is given by

P = h d g

P = 1.5 x 1000 x 1.67

P = 2505 Pa

A conducting sphere of radius 5.0 cm carries a net charge of 7.5 µC. What is the surface charge density on the sphere?

Answers

Answer:

[tex]\sigma=0.014\ C/m^2[/tex]

Explanation:

Given that,

The radius of sphere, r = 5 cm = 0.05 m

Net charge carries, q = 7.5 µC = 7.5 × 10⁻⁶ C

We need to find the surface charge density on the sphere. Net charge per unit area is called the surface charge density. So,

[tex]\sigma=\dfrac{7.5\times 10^{-6}}{\dfrac{4}{3}\pi \times (0.05)^3}\\\\=0.014\ C/m^2[/tex]

So, the surface charge density on the sphere is [tex]0.014\ C/m^2[/tex].

A 0.160kg glider is moving to the right on a frictionless, horizontal air track with a speed of 0.820m/s . It has a head-on collision with a 0.300kg glider that is moving to the left with a speed of 2.27m/s . Suppose the collision is elastic.
Part A
Find the magnitude of the final velocity of the 0.160kg glider. m/s
Part B
Find the direction of the final velocity of the 0.160kg glider.
i. to the right
ii. to the left
Part C
Find the magnitude of the final velocity of the 0.300kg glider. m/s
Part D
Find the direction of the final velocity of the 0.300kg glider.

Answers

Answer:

A) v_{f1} = -3.2 m / s,  B) LEFT , C) v_{f2} = -0.12 m / s,  D) LEFT

Explanation:

This is a collision exercise that can be solved using momentum conservation, for this we define a system formed by gliders, so that the forces during the collision are internal and the moment is conserved.

Let's use the subscript 1 for the lightest glider m1 = 0.160 kg and vo1 = 0.820 m / s

subscript 2 for the heaviest glider me² = 0.820 kg and vo2 = -2.27 m / s

Initial instant. Before the crash

          p₀ = m₁ v₀₁ + m₂ v₀₂

Final moment. After the crash

          p_f = m₁ v_{f1} + m₂ v_{f2}

          p₀ = p_f

          m₁ v₀₁ + m₂ v₀₂ = m₁ v_{f1} + m₂ v_{f2}

 as the shock is elastic, energy is conserved

         K₀ = K_f

         ½ m₁ v₀₁² + ½ m₂ v₀₂² = ½ m₁ [tex]v_{f1}^2[/tex] + ½ m₂ [tex]v_{f2}^2[/tex]

         m₁ (v₀₁² - v_{f1}²) = m₂ (v_{f2}² -v₀₂²)

let's make the relationship

         (a + b) (a-b) = a² -b²

         m₁ (v₀₁ + v_{f1}) (v₀₁-v+{f1}) = m₂ (v_{f2} + v₀₂) (v_{f2} -v₀₂)

let's write our two equations

         m₁ (v₀₁ -v_{f1}) = m₂ (v_(f2) - v₀₂)                                  (1)

         m₁ (v₀₁ + v_{f1}) (v₀₁-v_{f1}) = m₂ (v_{f2} + v₀₂) (v_{f2} -v₀₂)

we solve

         v₀₁ + v_{f2} = v_{f2} + v₀₂

we substitute in equation 1 and obtain

         M = m₁ + m₂

         [tex]v_{f1} = \frac{m_1-m_2}{M} v_o_1 + 2 \frac{m_2}{M} v_f_2[/tex]

         [tex]v_f_2 = \frac{2m_1}{M} v_o_1 + \frac{m_2-m_1}{M} v_o_2[/tex]vf2 = 2m1 / mm vo1 + m2-m1 / mm vo2

we calculate the values

         m₁ + m₂ = 0.160 +0.3000 = 0.46 kg

         v_{f1} = [tex]\frac{ 0.160 -0.300} {0.460} \ 0.820 + \frac{2 \ 0300}{0.460} \ (-2.27)[/tex]

         v_{f1} = -0,250 - 2,961

          v_{f1} = - 3,211 m / s

 

         v_{f2} = [tex]\frac{2 \ 0.160}{0.460} \ 0.820 + \frac{0.300 - 0.160}{0.460 } \ (-2.27)[/tex]

         v_{f2} = 0.570 - 0.6909

         v_{f2} = -0.12 m / s

now we can answer the different questions

A) v_{f1} = -3.2 m / s

B) the negative sign indicates that it moves to the left

C) v_{f2} = -0.12 m / s

D) the negative sign indicates that it moves to the LEFT

Olympus Mons on Mars is the largest volcano in the solar system, at a height of 25 km and with a radius of 309 km. If you are standing on the summit, with what initial velocity would you have to fire a projectile from a cannon horizontally to clear the volcano and land on the surface of Mars

Answers

Answer:

The velocity is 2661.5 m/s.

Explanation:

Radius, horizontal distance, d = 309 km

height, h = 25 km

acceleration due to gravity on moon, g =3.71 m/s^2

Let the time taken is t and the horizontal velocity is u.

horizontal distance = horizontal velocity x time

309 x 1000 = u t .... (1)

Use second equation of motion in vertical direction.

[tex]h = u_yt +0.5 gt^2\\\\25000 = 0 + 0.5\times 3.71\times t^2\\\\t =116.1 s[/tex]  

So, put in (1)

309 x 1000 = u x 116.1

u = 2661.5 m/s

Two objects are interacting, but stay stationary. Which best describes what is happening to the action and react
forces?
There are no forces acting on the objects.
The forces are equal and opposite each other.
One object is exerting more force than the other.
O Their forces are occurring at different times.

Answers

Awnser is B. The forces are equal opposite of each other.

Answer:b the force are equal and opposite each other

Explanation:

Two projectiles A and B are fired simultaneously from a level, horizontal surface. The projectiles are initially 62.2 m apart. Projectile A is
fired with a speed of 19.5 m/s at a launch angle 30° of while projectile B is fired with a speed of 19.5 m/s at a launch angle of 60°. How long
it takes one projectile to be directly above the other?​

Answers

Let the point where A is launched act as the origin, so that the horizontal positions at time t of the respective projectiles are

• A : x = (19.5 m/s) cos(30°) t

• B : x = 62.2 m + (19.5 m/s) cos(60°) t

These positions are the same at the moment one projectile is directly above the other, which happens for time t such that

(19.5 m/s) cos(30°) t = 62.2 m + (19.5 m/s) cos(60°) t

Solve for t :

(19.5 m/s) (cos(30°) - cos(60°)) t = 62.2 m

t = (62.2 m) / ((19.5 m/s) (cos(30°) - cos(60°))

t8.71 s

Other Questions
p{x:x is a natural number x (9 Please help ASAP and if u can show work Plastic Products Ltd is a company business whole the country that produces and markets plastic cups, teaspoons, knives and forks for the catering industry. The company was established in 2010 in response to the changes taking place in the catering industry. The growth of the fast-food sector of the market was seen as an opportunity to provide disposable eating utensils which would save on human resources and allow the speedy provision of utensils for fast customer flow. In addition, Plastic Products has benefited from the growth in supermarkets, convenience stores and food processed manufacturers. The expansion of sales and outlets has led Mr. Long, the sales manager, to recommend to Mr. An, the general manager, that the present sales force should be increased. Mr. Long believes that the new recruits should have experience of selling fast-moving consumer goods since essentially that is what his products are. Mr. An believes that the new recruits should be familiar with plastic products since that is what they are selling. He favors recruiting from within the plastics industry, since such people are familiar with the supply, production and properties of plastic field. Suppose the figure KLMN is dilated using a scale factor of 1/3 with the center of dilation at the origin. Which are the ordered pairs for the image?1. K(-1,3), L(-3,0), M(, -8/3), N(2, 4/3)2. K(-9,27), L(-27,0), M(6, -24), N(18, 12)3. K(0,6), L(-6,-3), M(-1, -5), N(3, 1)4. K(3,-1), L(0,-3), M(-8/3, ), N(4/3,2) Can someone help me please this is my last one The ability of the human body to break down the red color in beets is controlled by an autosomal dominant allele. The inability is recessive, detected by red coloration of the urine (we will call this phenotype 'secretor'). If a nonsecretor woman with a secretor father has children with a nonsecretor man who in a previous relationship had a secretor daughter, what is the probability that their first child will be... SOMEONE PLS HELP ME I WILL MAKE U BRAINLIST ! In a survey sample of 83 respondents, about 30.1 percent of the samplework less than 40 hours per week. What is the estimated standard error for the group of respondents who work 40 hours or more per week?(*round to two decimal places) Students are completing a lab in which they let a lab cart roll down a ramp. The students record the mass of the cart, the height of the ramp, and the velocity at the bottom of the ramp. The students then calculate the momentum of the cart at the bottom of the ramp.A 4 column table with 3 rows. The first column is labeled Trial with entries 1, 2, 3, 4. The second column is labeled Mass of Cart in kilograms with entries 200, 220, 240, 260. The third column is labeled Height of ramp in meters with entries 2.0, 2.1, 1.5, 1.2. The fourth column is labeled Velocity at Bottom in meters per second with entries 6.5, 5.0, 6.4, 4.8.Which trials cart has the greatest momentum at the bottom of the ramp? Can someone help me with this math homework please! My children, my Africa questions and answers sbar T.N. delivered a healthy male infant 2 hours ago. She had a midline episiotomy. This is her sixth pregnancy. Before this delivery, she was para 4014. She had an epidural block for her labor and delivery. She is now admitted to the postpartum unit. 1. What is important to note in the initial assessment Solve for x. Please help fast: archi could play the guitar which sentence is this I need help on this graphing question if anyone can, please help me What is the value of x in the equation 0.7x 1.4 = 3.5?1. -72. -33. 74. 3 pa help.about ibong adarna OAA', OBB', and OCC' are straight lines. Triangle ABC is mapped onto Triangle A'B'C' by an enlargement with center O. What is the scale factor of enlargement. When a constant force acts upon an object, the acceleration of the object varies inversely with its mass. When a certain constant force acts upon an object withmass 7 kg, the acceleration of the object is 4 m/s?. If the same force acts upon another object whose mass is 2 kg, what is this object's acceleration? Please help! i have no idea how to do this, all i know is it's the sine rule. it's due tomorrow so if you know how to do this please help haha Write the equations for a line parallel to the line:y=-4/3x-4That goes through the point (-7,-6)Write your equation in slope intercept form, using reduced fractions for the slope and intercept if necessary.