URGENT WILL GIVE POINTS I NEED SOON!!!!

Answer:I’m not really sure but I think it might be D but please I’m sorry if I get it wrong

Explanation:

No, the rate of the reaction between NO2 and CO being independent of [CO] does not necessarily mean that CO is a catalyst for the reaction.

The rate of a chemical reaction depends on the concentrations of the reactants and any catalysts involved. If the rate of the reaction is independent of the concentration of a particular reactant (in this case, CO), it suggests that the reaction is not affected by changes in the concentration of that reactant.

CO could potentially be a reactant that participates directly in the reaction rather than acting as a catalyst. In such cases, the reaction rate may be determined by other factors or steps in the reaction mechanism. The rate of the reaction between NO2 and CO being independent of [CO] could indicate that the rate-determining step of the reaction does not involve the CO concentration.

To determine if CO is a catalyst for the reaction, additional information about the reaction mechanism or the role of CO in the reaction would be needed. Catalysts typically undergo a different reaction pathway and are not consumed in the overall reaction, whereas reactants are consumed in the reaction.

learn more about Catalysts from :

https://brainly.com/question/12507566

#SPJ11

Answer:

gas given off

Explanation:

that's the answer

In general, single-displacement reactions are more reactive compared to synthesis and decomposition reactions. In terms of energy involved, single-displacement reactions require the least amount of energy to take place.

The energy that is involved in chemical reactions is the energy required to break the bonds of the reactants as well as the energy that is released when the new bonds form during the creation of the products. In synthesis and decomposition reactions, more energy is required compared to single-displacement reactions.

Synthesis reactions combine two or more reactants to form a single product. This process requires energy to break the bonds in the reactants and additional energy to create the bonds between the new atoms in the product. In contrast, decomposition reactions involve breaking down a single compound into two or more simpler products. This process requires energy to break the bonds within the compound, which is generally more energy than is required in a single-displacement reaction.

To know more about decomposition reactions, visit:

https://brainly.com/question/14024847

#SPJ11

Answer:

Please elaborate. Maybe if you had actual answer choices

Explanation:

...

Answer:it’s b they transfer thermal energy away from earths core towards its crust

Explanation:

Good luck!

Thermal energy moves from the outer core, through the mantle, and to the  crust by conduction.

Heat transferred from the core through the mantle and to the crust in the process of conduction. The lower mantle is heated directly by conduction from the core. In conduction, heat is transferred from one particles to another.

In the process of conduction, heat flows from warmer objects to cooler objects so the outer core has high amount of heat energy which is transferred to the surrounding mantle layer due to its lower temperature so we can conclude that thermal energy moves from the outer core, through the mantle and to the crust by conduction.

Learn more about conduction here: https://brainly.com/question/893656

Learn more: https://brainly.com/question/18817350

To solve this problem, we need to use the concept of elementary charge and Avogadro's number.

(a) To find the number of excess electrons on the sphere, we need to determine the net charge of the sphere.

Given:

Atomic number of lead (Z) = 82

Atomic mass of lead (M) = unknown

To calculate the mass of the lead sphere, we need to know the atomic mass of lead. However, it is not provided in the question. Could you please provide the atomic mass of lead?

(b) Once we have the atomic mass of lead, we can calculate the number of excess electrons per lead atom using the equation:

Number of excess electrons per lead atom = (Net charge of the sphere) / (Charge of one electron)

The charge of one electron is equal to the elementary charge (e), which is approximately 1.602 × 10^(-19) coulombs.

To know more about mass visit:

brainly.com/question/11954533

#SPJ11

Answer:

B

Explanation:

Answer:

The chemical equation for photosynthesis is:

6CO2 + 6H2O → C6H12O6 + 6O2

This equation shows that for every 6 moles of CO2 (carbon dioxide) and 6 moles of H2O (water) that are used in photosynthesis, one mole of C6H12O6 (glucose/sugar) and 6 moles of O2 (oxygen) are produced.

The molar mass of water (H2O) is 18.015 g/mol. Therefore, 100.5 g of water is equal to:

100.5 g / 18.015 g/mol ≈ 5.58 moles of water

Since the ratio of water to glucose in the equation is 6:1, we can calculate the number of moles of glucose produced as:

5.58 moles of water / 6 = 0.93 moles of glucose

The molar mass of glucose (C6H12O6) is 180.156 g/mol. Therefore, the mass of glucose produced is:

0.93 moles of glucose x 180.156 g/mol = 167.5 g of glucose

Therefore, if a plant absorbs 100.5 g of water, it will produce approximately 167.5 g of sugar through photosynthesis, assuming it has plenty of carbon dioxide available.

the molarity of the acetic acid solution is 0.1571 M.

To determine the molarity of the acetic acid (HC2H3O2) solution, we can use the concept of stoichiometry and the volume and concentration data provided.

Given:

Volume of KOH solution = 15.5 ml

Molarity of KOH solution = 0.215 M

Volume of acetic acid solution = 21.2 ml

In a balanced chemical equation between KOH and acetic acid, the stoichiometric ratio is 1:1. This means that 1 mole of KOH reacts with 1 mole of acetic acid.

Using the equation:

KOH(aq) + HC2H3O2(aq) -> H2O(l) + KC2H3O2(aq)

The moles of KOH can be calculated using the formula:

Moles = Volume (in liters) x Molarity

Moles of KOH = (15.5 ml / 1000) L x 0.215 M

            = 0.0033325 moles

Since the stoichiometric ratio is 1:1, the moles of acetic acid are also 0.0033325 moles.

The molarity of acetic acid can be calculated using the formula:

Molarity = Moles / Volume (in liters)

Molarity of acetic acid = 0.0033325 moles / (21.2 ml / 1000) L

                      = 0.1571 M

To know more about molarity visit:

brainly.com/question/31545539

#SPJ11

Answer:

The answer is HCl → H 2 O H+ + Cl.

The change in entropy (ΔS) for the expansion and heating of neon gas is 0.514 J/K.

To calculate the change in entropy (ΔS) for the expansion and heating of neon gas, we can use the ideal gas equation and the formula for entropy change:

ΔS = nR ln(Vf/Vi) + nCv ln(T_f/Ti)

Where:

The  number of moles of neon gas (n) is calculated using the ideal gas equation:

n = PV / RT

Given:

P = 1.0 atm

Vf = 2.6 L

Vi = 1.2 L

T_f = 40°C = 40 + 273.15 K = 313.15 K

Ti = 20°C = 20 + 273.15 K = 293.15 K

R = 8.314 J/(mol·K)

n = (P × Vf) / (R × T_f)

n = (1.0 atm × 2.6 L) / (8.314 J/(mol·K) × 313.15 K)

n ≈ 0.1049 mol

The molar heat capacity at constant volume (Cv) for neon gas. The molar heat capacity of an ideal monatomic gas at constant volume is given as 3/2 R.

Cv = 3/2 R

Cv = (3/2) × 8.314 J/(mol·K)

Cv = 12.471 J/(mol·K)

Solving for entropy change:

ΔS = nR ln(Vf/Vi) + nCv ln(T_f/Ti)

ΔS = (0.1049 mol) × (8.314 J/(mol·K)) × ln(2.6 L / 1.2 L) + (0.1049 mol) × (12.471 J/(mol·K)) × ln(313.15 K / 293.15 K)

ΔS ≈ 0.219 J/K + 0.295 J/K

ΔS ≈ 0.514 J/K

Learn more about entropy change at: https://brainly.com/question/31711830

#SPJ4

When enzyme a was run with 40 μM substrate, the initial rate ([tex]v_{0}[/tex]) was 10 μM/min, and when it was run with 4 mM substrate, the [tex]v_{0}[/tex] was 20 μM/min. The approximate ([tex]V_{max}[/tex] is 20 μM/min, and the approximate [tex]K_{m}[/tex]  is 40.8 μM.

To estimate the approximate [tex]V_{max}[/tex] and [tex]K_{m}[/tex]  of enzyme A, we can use the Michaelis-Menten equation, which describes the relationship between the initial reaction rate ([tex]v_{0}[/tex]), the maximum reaction rate ([tex]V_{max}[/tex] ), and the substrate concentration (S):

[tex]v_{0}[/tex] = ([tex]V_{max}[/tex] * S) / ([tex]K_{m}[/tex] + S)

For 40 μM substrate:

[tex]v_{0}[/tex] = 10 μM/min

S = 40 μM

For 4 mM substrate:

[tex]v_{0}[/tex] = 20 μM/min

S = 4 mM = 4000 μM

Using the Michaelis-Menten equation:

[tex]v_{0}[/tex] = ([tex]V_{max}[/tex]* S) / ([tex]K_{m}[/tex] + S)

Let's set up the equations using the given data points:

10 = ([tex]V_{max}[/tex] * 40) / ([tex]K_{m}[/tex] + 40)

20 = ([tex]V_{max}[/tex] * 4000) / ([tex]K_{m}[/tex] + 4000)

We can simplify these equations and solve them simultaneously:

Equation 1: 10([tex]K_{m}[/tex] + 40) = 40[tex]V_{max}[/tex]

Equation 2: 20([tex]K_{m}[/tex] + 4000) = 4000[tex]V_{max}[/tex]

Divide Equation 2 by Equation 1:

2([tex]K_{m}[/tex] + 4000) / ([tex]K_{m}[/tex] + 40) = 100

Expanding and simplifying:

2[tex]K_{m}[/tex] + 8000 = 100[tex]K_{m}[/tex] + 4000

98[tex]K_{m}[/tex] = 4000 - 8000

98[tex]K_{m}[/tex] = -4000

[tex]K_{m}[/tex] = -4000 / 98

[tex]K_{m}[/tex] ≈ 40.8 μM (Approximate [tex]K_{m}[/tex] value)

Substituting the value of [tex]K_{m}[/tex] into Equation 1:

10 = ([tex]V_{max}[/tex] * 40) / (40.8 + 40)

10 = ([tex]V_{max}[/tex] * 40) / 80.8

[tex]V_{max}[/tex] = (10 * 80.8) / 40

[tex]V_{max}[/tex] ≈ 20 μM/min (Approximate [tex]V_{max}[/tex] value)

Therefore, the approximate ([tex]V_{max}[/tex] is 20 μM/min, and the approximate [tex]K_{m}[/tex]  is 40.8 μM.

Learn more about enzyme:

https://brainly.com/question/14577353

#SPJ11

a. The first ionization energy of selenium is less than that of bromine because selenium has a larger atomic radius and a higher effective nuclear charge than bromine.

b. The first ionization energy of selenium is greater than that of tellurium because tellurium has a larger atomic radius and a higher shielding effect from inner electron shells compared to selenium.

a. The first ionization energy is the energy required to remove the outermost electron from an atom. In the case of selenium and bromine, the first ionization energy of selenium is less than that of bromine due to differences in atomic structure.

Selenium (atomic number 34) has a larger atomic radius than bromine (atomic number 35), meaning that the outermost electron in selenium is located farther from the nucleus. As a result, the attractive force between the outermost electron and the nucleus is weaker in selenium, making it easier to remove the electron and requiring less energy compared to bromine.

Additionally, selenium has a higher effective nuclear charge (the net positive charge experienced by the outermost electron) compared to bromine. The effective nuclear charge depends on the number of protons in the nucleus and the shielding effect of inner electron shells.

Despite having one less proton than bromine, selenium has a greater effective nuclear charge due to its smaller atomic size and less shielding from inner electron shells. This stronger attraction between the nucleus and the outermost electron in bromine requires more energy to remove the electron, resulting in a higher first ionization energy for bromine.

b. The first ionization energy of selenium is greater than that of tellurium (atomic number 52) because tellurium has a larger atomic radius and a higher shielding effect. Tellurium has more electron shells compared to selenium, resulting in a larger atomic size and greater shielding of the outermost electron from the nucleus.

The larger atomic size leads to a weaker attractive force between the nucleus and the outermost electron in tellurium, making it easier to remove the electron and requiring less energy compared to selenium. Therefore, selenium has a higher first ionization energy than tellurium.

To know more about ionization energy refer here:

https://brainly.com/question/28385102#

#SPJ11

A bottle is filled with a small amount of a volatile liquid and sealed. Sometime later, it is observed that no liquid is evident in the sealed bottle. The following statement would explain this observation: "Liquid and vapor are at equilibrium in the bottle."

This observation could be explained by stating that liquid and vapor are at equilibrium in the bottle. It means that there is a dynamic equilibrium between the liquid and vapor phases of the substance in the closed system. When the amount of vapor in the bottle is equal to the amount of liquid that has evaporated from the bottle, the system reaches an equilibrium state.

Therefore, the vapor state is favored when equilibrium is established. The liquid has not undergone sublimation. Also, more time is not needed to establish equilibrium. Furthermore, too little liquid was not added to achieve liquid-vapor equilibrium in the closed system. Hence, the statement "Liquid and vapor are at equilibrium in the bottle" explains the observation that no liquid is evident in the sealed bottle.

To know more about dynamic equilibrium, visit:

https://brainly.com/question/1298350

#SPJ11

In order to calculate the value of the rate constant for this reaction, we need to consider the given information, which is:A plot of versus gives a straight line with a slope of

This information allows us to find the order of the reaction, which is 1, because the slope of a plot of concentration versus time is equal to the order of the reaction. After finding the order of the reaction, we can write the rate law for the reaction as follows: rate = k [A]¹ Where A represents the concentration of the reactant (venom) and 1 represents the order of the reaction. Since we have already found that the order of the reaction is 1, we can substitute this value into the rate law to get:

rate = k [A]

Now we have all the information we need to solve for the rate constant k, which is what the question is asking for. We are given data from the coworker, but there is no information provided about the actual values of concentration and rate for the reaction. Therefore, we cannot calculate the exact value of the rate constant. We can only determine the units of the rate constant, which would be M1s1, based on the order of the reaction being 1.

To know more about concentration visit :

https://brainly.com/question/13872928

#SPJ11

Answer: The Answer is A.

Explanation:

The amount of energy is directly proportional to the photon's electromagnetic frequency and thus, equivalently, is inversely proportional to the wavelength. The higher the photon's frequency, the higher its energy. Equivalently, the longer the photon's wavelength, the lower its energy.

Hope this Helps!

The photon energy, wavelength, and frequency are the characteristic of the waves and particles. "The photon frequency is proportional to energy and inversely proportional to wavelength." Thus, option A is correct.

Photon energy has been defined as the energy constituted by the photon of the atom. It is given by the product of Planck's constant and wave frequency. The frequency of the photons is in inverse relation to the wavelength. It is given as,

E = hυ  = h c / λ

Here, E is energy, h is Planck's constant, c is the speed of light, υ id frequency, and λ is the wavelength.

On the other hand, the frequency is in direct relation to the energy. The higher the frequency of the photons higher will be its energy.

Therefore, option A. frequency is inversely proportional to the wavelength.

Learn more about photon energy, here:

https://brainly.com/question/2393994

#SPJ2

Answer:

Kinetic energy is transferred from the leg to the ball

Explanation:

Before kicking the ball, you'll need to run to where the position of the ball is which implies that your leg is not at rest, immediately you kick the ball, you will be transferring the kinetic energy of your leg to the ball.

Kinetic energy is transferred from the leg to the soccer ball.

Kinetic energy is the strength of the movement, observable as the movement of an item, particle, or set of debris. Any item in movement is the usage of kinetic energy: someone taking walks, a thrown baseball, a crumb falling from a table, and a charged particle in an electric-powered field are all examples of kinetic electricity at work.

Learn more about Kinetic energy here https://brainly.com/question/25959744

#SPJ2

The given redox reaction is:

Cr2O7^2- + C2H4O → C2H4O2 + Cr3+

To balance this reaction, we first balance the oxygen atoms by adding H2O on the right side of the equation. The number of H2O molecules added depends on the number of oxygen atoms needed. In this case, we need three O atoms on the right side, so we add three H2O molecules to the right side of the equation:

Cr2O7^2- + C2H4O → C2H4O2 + Cr3+ + 3H2O

Next, we balance the hydrogen atoms by adding H+ ions on the left side of the equation. The number of H+ ions added depends on the number of hydrogen atoms needed. In this case, we need eight H atoms on the left side, so we add eight H+ ions to the left side of the equation:

Cr2O7^2- + C2H4O + 8H+ → C2H4O2 + Cr3+ + 3H2O

Finally, we balance the charge by adding electrons. The number of electrons added depends on the difference in charge on the left and right side of the equation. In this case, the left side has a charge of -2 (from the Cr2O7^2- ion), while the right side has a charge of +3 (from the Cr3+ ion). This means that we need to add 5 electrons to the left side of the equation to balance the charge:

Cr2O7^2- + C2H4O + 8H+ + 5e- → C2H4O2 + Cr3+ + 3H2O

Therefore, the coefficient for water molecules in the balanced version of the given redox reaction is 3.

To know more about redox reaction visit

https://brainly.com/question/28300253?

#SPJ11

The optimum wavelength for measuring the absorbance versus concentration of a series of Blue 1 dye concentrations is 628nm. The absorbance measurements are most accurate and sensitive for FD&C in the range of 0.2-1.0. Hence the estimated concentration of the dye was 7.0 uM (7.0 x 106 M).

Visible absorption spectra provide information about a dye or a compound's electronic structure and can be used to determine the concentration of a compound. To determine the optimum wavelength for measuring the absorbance versus concentration of a series of Blue 1 dye concentrations, we can refer to the visible absorption spectrum for Blue 1 dye.

The graph provided in the question shows that the maximum absorbance for Blue 1 dye occurs at approximately 628 nm. This is also confirmed by the Beer-Lambert law, which states that the concentration of a solution is proportional to its absorbance. Therefore, the optimum wavelength for measuring the absorbance versus concentration of a series of Blue 1 dye concentrations is 628 nm.

The range of 0.2-1.0 is where the absorbance measurements are most accurate and FD&C sensitive. Therefore, the absorbance measurements for Blue 1 dye should be taken at this wavelength. Hence the estimated concentration of the dye was 7.0 uM (7.0 x 106 M).

Learn more About optimum wavelength from the given link

https://brainly.com/question/30608134

#SPJ11

Answer:

2.5768 * 107

Explanation:

Write it in a number between 1 and 9 and add decimal accordingly. So the answer is 2.5678 multiplied by 10 raised to power 7.

The mass percent of oxygen in the compound is 16.6%. The correct option is [A] 16.6%

From the question,

We are to determine the mass percent of oxygen in the compound

The mass percent of oxygen in the compound can be calculated from

[tex]Mass\ percent\ of\ oxygen = \frac{Mass\ of\ oxygen\ in\ the\ compound}{Mass\ of\ the\ compound } \times 100\%[/tex]

First, we will determine the mass of oxygen in the compound

Mass of oxygen in the compound = Mass of the compound - Mass of the metal before it combined with oxygen

From the question

Mass of the compound = 3.01 g

Mass of the metal before it combined with oxygen = 2.51 g

∴ Mass of oxygen in the compound = 3.01g - 2.51g

Mass of oxygen in the compound = 0.5 g

Now,

For the mass percent of oxygen in the compound

[tex]Mass\ percent\ of\ oxygen = \frac{Mass\ of\ oxygen\ in\ the\ compound}{Mass\ of\ the\ compound } \times 100\%[/tex]

∴ [tex]Mass\ percent\ of\ oxygen = \frac{0.5}{3.01} \times 100\%[/tex]

[tex]Mass\ percent\ of\ oxygen = \frac{50}{3.01} \%[/tex]

Mass percent of oxygen = 16.611%

Mass percent of oxygen ≅ 16.6%

Hence, the mass percent of oxygen in the compound is 16.6%. The correct option is [A] 16.6%

Learn more here: https://brainly.com/question/14139062

Number of atoms of C in 30.2 grams of   C₁₂H₂₂O₁₁ = 6.39 × 10²³ atoms

Given that mass of C₁₂H₂₂O₁₁ is 30.2 grams.

We are to find out the number of atoms of C in 30.2 grams of C₁₂H₂₂O₁₁.

In order to calculate the number of atoms of C in 30.2 grams of C₁₂H₂₂O₁₁, we need to follow the steps below:

Step 1: Calculate the molecular mass of C₁₂H₂₂O₁₁

Molecular mass of C₁₂H₂₂O₁₁ = (12 × 12.01) + (22 × 1.01) + (11 × 16) = 342.34 g/mol

Step 2: Determine the mass of carbon in C₁₂H₂₂O₁₁

The atomic mass of carbon is 12.01 g/mol.

Therefore, the mass of carbon in 1 mol of C₁₂H₂₂O₁₁ = (12 × 12.01) = 144.12 g/mol

Thus, the mass of carbon in 30.2 g of C₁₂H₂₂O₁₁= (30.2 × 144.12) / 342.34= 12.73 g

Step 3: Calculate the number of moles of carbon

Now, we know that the atomic mass of carbon is 12.01 g/mol.

Moles of carbon in 12.73 g = 12.73 / 12.01= 1.06

Step 4: Calculate the number of atoms of carbon1 mole of any element contains 6.022 × 10²³ atoms of that element.

So, the number of atoms of C in 1.06 moles= 1.06 × (6.022 × 10²³)= 6.39 × 10²³ atoms of C

Thus, there are 6.39 × 10²³ atoms of C in 30.2 grams of C₁₂H₂₂O₁₁.

To learn more about mole concept, visit:

https://brainly.com/question/22540912

#SPJ11

Answer: because the particles in a solid are more closer to each other than the liquid and gas particles. So the closeness if the particles give a particular shape for the substance.

Please add me to the brainleist please!!!!!!!!

The two particles found in the nucleus of an atom are protons and neutrons. Protons carry a positive charge, while neutrons are neutral. Electrons, though essential to atoms, are located outside the nucleus in electron shells or orbitals. Option 3.

The two particles found in the nucleus of an atom are protons and neutrons. The nucleus is the central part of an atom that contains most of its mass and is positively charged. Protons are positively charged subatomic particles that carry a charge of +1.

They are crucial in determining the atomic number and identity of an element. Neutrons, on the other hand, are electrically neutral subatomic particles that do not carry a charge. They have a mass similar to protons and play a role in stabilizing the nucleus through the strong nuclear force.

Electrons, which are negatively charged subatomic particles, are not found in the nucleus. Instead, they occupy regions called electron shells or orbitals surrounding the nucleus. Electrons have a negligible mass compared to protons and neutrons.

Atoms, as a whole, consist of a positively charged nucleus surrounded by these negatively charged electrons. The number of protons in the nucleus determines the atomic number of an element, while the combined number of protons and neutrons determines its mass number. Option 3 is correct.

For more such question on atom. visit :

https://brainly.com/question/17545314

#SPJ8

Answer:

Explanation:

206 kl.

Answer:

Iodine is a mineral found in some foods. The body must have iodine to make thyroid hormones. The hormones control the body's metabolism and many other important functions. Without iodine, thyroid hormone production can decrease.

Explanation: