Use Appendix Table 5 and linear interpolation (if necessary) to approximate the critical value t0.0025,20​. (Use decimal notation. Give your answer to four decimal places.) t0.0025,20​=[ Verify the approximation using technology. (Use decimal notation. Give your answer to four decimal places.)

Answer:

c > 9

Step-by-step explanation:

[tex]\frac{2c}{3} +1 > 7[/tex]

To solve this, first subtract 1 from both sides

[tex]\frac{2c}{3} +1 > 7\\\frac{2c}{3} > 6[/tex]

multiply both sides by 3

2c > 18

divide both sides by 2

c > 9

Hope this helps! :)

Answer:

c > 9

Step-by-step explanation:

Assuming that cancellations are independent events, we can use the binomial distribution to find the probability that exactly 3 of the scheduled flights take place.

Let X be the number of flights that take place out of 3 scheduled flights. Then, X follows a binomial distribution with n=3 and p=0.81. The probability mass function of X is given by:

P(X=k) = (3 choose k) * (0.81)^k * (0.19)^(3-k)

where (3 choose k) is the binomial coefficient "3 choose k".

To find the probability that all 3 flights take place, we need to compute P(X=3):

P(X=3) = (3 choose 3) * (0.81)^3 * (0.19)^(0) = (1)(0.81)^3(1) = 0.531441

Therefore, the probability that all 3 scheduled flights will take place is approximately 0.531.

To learn more about probability : brainly.com/question/14210034

#SPJ11

The probability that all four coins come up heads is 1/16 or approximately 0.0625.

The probability of flipping a head on a single coin is 1/2. Since each coin is flipped independently, the probability of all four coins coming up heads can be calculated by multiplying the probability of getting heads on each coin.

That is,

P(all heads) = P(heads on penny) × P(heads on nickel) × P(heads on dime) × P(heads on quarter)

Each of these probabilities is 1/2 since each coin has two possible outcomes – heads or tails – and they are equally likely to occur.

Thus,

P(all heads) = (1/2) × (1/2) × (1/2) × (1/2) = 1/16

This means that if we were to flip these four coins many times, on average we would expect to see all four coins come up heads about once in every 16 flips. It is important to note that the probability of all four coins coming up heads is independent of any previous flips – the coins do not "remember" whether they landed heads or tails on previous flips.

Learn more about probability at: brainly.com/question/32004014

#SPJ11

Dan will need 360g of plain flour, 3 eggs, and 900ml of milk to make 12 pancakes.

To make 12 pancakes, Dan will need 360g of plain flour, 3 eggs, and 900ml of milk.

We can use proportions to figure out how much of each ingredient Dan will need. If 240g of plain flour, 2 eggs, and 600ml of milk are enough to make 8 pancakes, then we can set up the following ratios:

Plain flour: 240g/8 pancakes = x/12 pancakes

Eggs: 2/8 pancakes = y/12 pancakes

Milk: 600ml/8 pancakes = z/12 pancakes

Solving for x, y, and z in each of these ratios, we get x = 360g of plain flour, y = 3 eggs, and z = 900ml of milk. Therefore, Dan will need 360g of plain flour, 3 eggs, and 900ml of milk to make 12 pancakes.

Learn more about ingredient here

https://brainly.com/question/13558824

#SPJ11

Thus, the value of c f · dr. f(x, y) = xi yj c: r(t) = (5t 2)i tj, 0 ≤ t ≤ 1 is found as 2c using the  vector function.

To evaluate c f · dr, we first need to find the vector function of f evaluated along the path r.

Using the given function f(x, y) = xi yj and the path r(t) = (5t^2)i + tj, we can substitute for x and y to get:

f(r(t)) = (5t^2)i * (t)j = 5t^3i + 5tj

Next, we need to find the differential of the path dr, which is:
dr = (10t)i + j dt

Now we can evaluate the dot product of c f and dr:
c f · dr = ∫c f · dr = ∫(c)(5t^3i + 5tj) · (10t)i + j dt, where c is a constant
= ∫(50c t^4) dt + ∫(5c t) dt
= 10c/5 t^5 + 5c/2 t^2 + C

Evaluating this from 0 to 1, we get:
c f · dr = 10c/5(1)^5 + 5c/2(1)^2 - 10c/5(0)^5 - 5c/2(0)^2
= 2c + 0
= 2c

Therefore, the value of c f · dr is 2c.

Know more about the vector function.

https://brainly.com/question/30576143

#SPJ11

Job B has a lower salary than Job A, but the benefits make Job B a more attractive pay package.

When comparing the two jobs, it's important to consider not just the salary but also the benefits and paid time off. While Job A offers a higher salary than Job B, it doesn't come with any benefits. On the other hand, Job B has a lower salary but provides medical and dental insurance as well as more paid time off. Depending on the individual's priorities and circumstances, they may value either a higher salary or better benefits and work-life balance. Therefore, Job B could be considered more attractive to some people because of its benefits package, despite the lower salary.

Learn more about package here

https://brainly.com/question/12251427

#SPJ11

Krystal should choose Plan 1 as it will save her $180 over the course of a year.

Plan 1 costs $134.97 every 3 months, which means it costs Krystal $134.97/3 = $44.99 per month.

If Krystal plans to stay with one service plan for 1 year (12 months), then she would pay 12 * $44.99 = $539.88 for Plan 1.

To compare this to Plan 2, we need to know the cost of Plan 2. Let's say Plan 2 costs $59.99 per month. Then for one year, Krystal would pay 12 * $59.99 = $719.88 for Plan 2.

Comparing the two plans, Krystal should choose Plan 1 as it will save her $719.88 - $539.88 = $180 over the course of a year.

Note that the exact amount Krystal would save depends on the cost of Plan 2, which was not given in the problem. But the method for comparing the two plans is the same regardless of the actual cost of Plan 2.

Learn more about save here

https://brainly.com/question/30665961

#SPJ11

Fr the solution of Linear equations, the dollars earned by barney and betty are equal to $1.471428571 and $2.428571428 respectively.

We have barney and betty break into a parking meter. Amount of money from dimes and quarters = $3.90

Let the number of dimes and quarters collected by Barney and betty be x and y respectively. According to seniror,

x = y + 5 --(1)

Also, from unit conversion, 1 quarters

= 0.25 dollar and 1 dimes are worth the same as 0.1 dollar. So,

(number of dimes × value of 1 dimes in dollars ) + (number of quaters × value of 1 quaters in dollars )

=> 0.1 x + 0.25 y = $3.90

Multiple both sides by 100, we result

10x + 25 y = 390 --(2)

Now, we have two linear equations and we have to solve these for determining the values of x and y

Using Substitution method, Substitute value of x from equation(1) to equation(2),

=> 10( y + 5) + 25y = 390

=> 10y + 50 + 25y = 390

=> 35y = 340

=>[tex] y = \frac{ 340}{35}[/tex]

= 9.71428571429

from equation (1), x = 9.71428571429 + 5

= 14.7142857143.

So, money get by barney= 9.71428571429 × 0.25 = $2.428571428

and for betty = 14.71 × 0.1 = $1.471428571

Hence, required values are 2.428571428 dollars and 1.471428571 dollars.

For more information about linear equations, visit :

https://brainly.com/question/25858757

#SPJ4

Complete question:

Barney and Betty break into a parking meter with $3.90 in dimes and quarters in it (legal disclaimer: don't do this), and agree that Barney will get all the dimes, and Betty will get all the quarters. (Barney isn't terribly bright.) barney ends up with five more coins than betty. how much money did each get?. oo

Y is proportional to square of (X-7), when Y = 2 , X = 12 .

to make an equation we need to remove proportionality and so we multiply Y with an variable.

Let that variable be 'p'.

So according to the question,

Yp = (X-7)² (from this we will find p)

putting all the known values

2p= (12-7)²

2p = 5 * 5

p = 25/2

Now, using the same equation we will find Y , when X= 17.

Y * 25/2 = ( 17- 7)²

Y * 25/2 = 10 * 10

Y = 100 * 2 / 25

Y = 8

Step-by-step explanation:

y=(x-7)^2k....... equation 1

2=(12-7)^2xk

where k is constant

2=(5)^2k

2=(5x5)k

2=25k

*Divide both sides by coefficient of k*

2/25=25/25k

k=2/25

y=(17-7)^2 x2/25..... equation 2

y=(10)^2x2/25

y=(10x10) x2/25

y=100x2/25

y=200/25

y=8

To stretch a spring from its natural length to 0.6 feet beyond its natural length, a work of 0.36 foot-pounds is required.

The work done in stretching a spring is equal to the area under the force-extension graph. Since the force required to hold the spring stretched 0.2 feet beyond its natural length is 1 pound, we can assume that the force required to stretch the spring from its natural length to 0.6 feet beyond its natural length is directly proportional to the extension. Therefore, the force required to stretch the spring 0.4 feet beyond its natural length is 2 pounds.

To calculate the work done in stretching the spring from 0.2 feet beyond its natural length to 0.6 feet beyond its natural length, we can use the formula for work:

Work = Force x Distance

Since the force required to stretch the spring 0.4 feet beyond its natural length is 2 pounds, and the distance over which the force is applied is 0.4 feet, the work done is:

Work = 2 x 0.4 = 0.8 foot-pounds

Therefore, the work done in stretching the spring from its natural length to 0.6 feet beyond its natural length is:

0.8 - 0.2 = 0.6 foot-pounds.

To learn more about Force click here, brainly.com/question/30507236

#SPJ11

Answer:

(-11.667, -9.333)

Step-by-step explanation:

were you looking for the intersection? that's what i just found. have a great day and thx for your inquiry.

The possible values for a, b, and c are a = 0, b = -10, and c = 3.

We have the following information:

||v|| = √(a^2 + b^2 + c^2) = √109

⟨v, u2⟩ = a⟨u1, u2⟩ + b⟨u2, u2⟩ + c⟨u3, u2⟩ = -10

⟨v, u3⟩ = a⟨u1, u3⟩ + b⟨u2, u3⟩ + c⟨u3, u3⟩ = 3

Since {u1, u2, u3} is an orthonormal basis, we have ⟨ui, uj⟩ = 0 if i ≠ j, and ⟨ui, ui⟩ = 1 for all i.

Using these properties, we can substitute the values into the equations:

-10 = b⟨u2, u2⟩

-10 = b(1)

b = -10

3 = c⟨u3, u3⟩

3 = c(1)

c = 3

Substituting the values of b and c into the norm equation, we get:

√(a^2 + (-10)^2 + 3^2) = √109

a^2 + 109 = 109

a^2 = 0

a = 0

Know more about orthonormal basis here:

https://brainly.com/question/30882267

#SPJ11

Answer:

[tex] \sqrt{ \frac{243}{867} } = \sqrt{ \frac{81}{289} } = \frac{9}{17} [/tex]

The two unit vectors orthogonal to the given vector v = (15, 8) are (-0.882, 0.471) and (0.471, -0.882).

Let v = (v1, v2) be a vector in R2. To show that (v2, -v1) is orthogonal to v, we need to prove that their dot product is equal to zero.

The dot product of v and (v2, -v1) is:

(v1, v2) • (v2, -v1) = v1*v2 + v2*(-v1) = v1*v2 - v1*v2 = 0

Since their dot product is zero, (v2, -v1) is orthogonal to v.

Now, let's use this fact to find two unit vectors orthogonal to the given vector v = (15, 8). The orthogonal vector to v is (8, -15). We need to find its magnitude and then divide each component by the magnitude to get the unit vectors.

Magnitude of (8, -15) = √(8^2 + (-15)^2) = √(64 + 225) = √289 = 17

Now, divide each component of (8, -15) by its magnitude:

Unit vector 1 (smaller first component) = (-15/17, 8/17) ≈ (-0.882, 0.471)
Unit vector 2 (larger first component) = (8/17, -15/17) ≈ (0.471, -0.882)

So the two unit vectors orthogonal to the given vector v = (15, 8) are approximately (-0.882, 0.471) and (0.471, -0.882).

Learn more about: Vector -https://brainly.com/question/25705666

#SPJ11

The probability of the event "~ (a ∩ d)", or the probability that either "a" OR "d" does not occur, is 3/5.

The symbol "∩" represents the intersection of two events.

For example, "a ∩ d" means the event where both "a" and "d" occur together.

The symbol "~" means "not" or "complement." So, "~ (a ∩ d)" means the event where "a ∩ d" does NOT occur, or in other words, where "a" OR "d" does not occur.

Now, onto the question.

We are given that p(a ∩ d) = 2/5, which means that the probability of both events "a" and "d" occurring together is 2/5.

We want to find the probability of the event "~ (a ∩ d)", or the probability that either "a" OR "d" does not occur.

To find this probability, we need to use some basic probability rules.

One of these rules is that the probability of an event happening (let's call it "E") is equal to 1 minus the probability of the complement of that event not happening (~E).

In other words, p(E) = 1 - p(~E).

So, if we apply this rule to the event "~ (a ∩ d)", we get:
p(~ (a ∩ d)) = 1 - p(a ∩ d)

Now we can substitute in the value we were given for p(a ∩ d):
p(~ (a ∩ d)) = 1 - 2/5

Simplifying this gives:
p(~ (a ∩ d)) = 3/5

Therefore, the probability of the event "~ (a ∩ d)", or the probability that either "a" OR "d" does not occur, is 3/5.

Know more about probability here:

https://brainly.com/question/251701

#SPJ11

the aardvark runs $10\sqrt{3} + 30$ meters.Since the circles have the same center, we can connect points $B$ and $C$ to the center of the circles to form radii of length $10$ and $20$ meters.
We can also draw a line segment connecting points $A$ and $K$ to form a straight line that intersects the two radii at points $D$ and $E$, respectively.

Using the Pythagorean theorem, we can find the length of $DE$ as follows:

$DE = \sqrt{AE^2 - AD^2}$

where $AE = 20$ meters and $AD = 10$ meters. Thus,

$DE = \sqrt{20^2 - 10^2} = 10\sqrt{3}$ meters.

We know that the aardvark runs along the path from $A$ to $D$, along the radius of the smaller circle, then along the path from $D$ to $E$, along the segment connecting the two radii, and finally along the path from $E$ to $K$, along the radius of the larger circle. Therefore, the total distance the aardvark runs is:

$AD + DE + EK = 10 + 10\sqrt{3} + 20 = 10\sqrt{3} + 30$ meters.

Thus, the aardvark runs $10\sqrt{3} + 30$ meters.
to  learn  more about Circle click here: brainly.com/question/12930236

#SPJ11

Answer:

B

Step-by-step explanation:

it should be B

The discount rate is kept above the federal funds rate because the Fed prefers that banks borrow reserves from each other in order to maintain a stable and competitive interbank lending market.

The discount rate is kept above the federal funds rate because the Fed prefers that banks borrow reserves from each other. So, the correct answer is option C) above; banks borrow reserves from each other. This is because the Federal Reserve wants to encourage banks to borrow from each other in the open market, which promotes stability and liquidity within the banking system.

                                  This helps to ensure that banks have access to necessary funds and can lend to customers at reasonable rates. Therefore, option D is incorrect and the correct answer is A) below; banks borrow reserves from each other.
                          The discount rate is kept above the federal funds rate because the Fed prefers that banks borrow reserves from each other.

                            So, the correct answer is option C) above; banks borrow reserves from each other. This is because the Federal Reserve wants to encourage banks to borrow from each other in the open market, which promotes stability and liquidity within the banking system.

Learn more about discount rate

brainly.com/question/31430480

#SPJ11

The area between z=1.1 and z=2.1 is approximately 0.982 - 0.864 = 0.118, rounded to three decimal places.

To find the area below z=1.04 for an Upper N(0,1) density, you will need to use the standard normal distribution table or a calculator with a z-table function. Here are the steps:

1. Locate the value of z=1.04 in the table or use the calculator's function.
2. Find the corresponding area value (which represents the probability or percentage of values below z=1.04).

The area below z=1.04 is approximately 0.851, rounded to three decimal places.

(b) To find the area above z=-1.4 for an Upper N(0,1) density, follow these steps:

1. Locate the value of z=-1.4 in the table or use the calculator's function.
2. Find the corresponding area value.
3. Since we need the area above z=-1.4, subtract the area value found in step 2 from 1.

The area above z=-1.4 is approximately 1 - 0.0808 = 0.919, rounded to three decimal places.

(c) To find the area between z=1.1 and z=2.1 for an Upper N(0,1) density, follow these steps:

1. Locate the values of z=1.1 and z=2.1 in the table or use the calculator's function.
2. Find the corresponding area values for both z=1.1 and z=2.1.
3. Subtract the area value of z=1.1 from the area value of z=2.1 to find the area between them.

The area between z=1.1 and z=2.1 is approximately 0.982 - 0.864 = 0.118, rounded to three decimal places.

Learn more about area

brainly.com/question/27683633

#SPJ11

8x³ is a term

-5 is a coefficient

+ 7 is a constant

Algebraic expressions are defined as expressions that are made up of terms, variables, constants, factors and coefficients.

These algebraic expressions are also composed of arithmetic or mathematical operations.

These operations are;

From the information given, we have that the algebraic expression is;

8x³ - 2x - 5x+7

We have that;

8x³ is a term

-2x is a term

-5 is a coefficient

+ 7 is a constant

Learn more about algebraic expressions at: https://brainly.com/question/4344214

#SPJ1

The correlation coefficient between daily ice cream sales and maximum daily temperature is a measure of the strength and direction of the linear relationship between these two variables.

To calculate the correlation coefficient, we need a sample of paired data that includes daily ice cream sales and the corresponding maximum daily temperature.

We can use a statistical software or a calculator to calculate the correlation coefficient. In this case, the correlation coefficient between maximum daily temperature and daily ice cream sales is 0.934, which indicates a strong positive linear relationship between these two variables.

This means that as the maximum daily temperature increases, the daily ice cream sales also tend to increase. Conversely, as the maximum daily temperature decreases, the daily ice cream sales tend to decrease as well.

To learn more about correlation : brainly.com/question/30116167

#SPJ11

Answer:

If 38% of students said they liked the sports offered at the school, 62% of students said they did not like the sports offered at the school.

.62s = 217, so s = 350 students

Let's denote the time it takes for the slower pipe to fill the tank on its own as $x$ hours. Then, the faster pipe takes $x-3$ hours to fill the tank on its own. We can use the formula for the rate of work to set up an equation: $r_1 + r_2 = \frac{1}{2}$, where $r_1$ and $r_2$ are the rates of work for each pipe.

We can express the rate of work in terms of the time it takes for each pipe to fill the tank on its own: $r_1 = \frac{1}{x}$ and $r_2 = \frac{1}{x-3}$. Substituting these expressions into the equation above and solving for $x$, we obtain $x=2$. Therefore, the slower pipe takes 2 hours to fill the tank on its own, and the faster pipe takes $2-3=-1$ hour, which doesn't make physical sense. This means there is an error in the problem statement.

To learn more about equation : brainly.com/question/29657983

#SPJ11

The notation p(z < a) represents the probability that a standard normal random variable is less than a. This can be found using a standard normal distribution table or a calculator that provides a normal distribution function.

The probability that a standard normal random variable is less than a can also be expressed as P(Z < a), where Z is a standard normal random variable.

The probability that a standard normal random variable is greater than a can be found using the complement rule, which states that the probability of an event occurring is equal to 1 minus the probability of the event not occurring. Therefore, P(Z > a) = 1 - P(Z < a).

The probability that a standard normal random variable is equal to a is zero, as the standard normal distribution is continuous and has an infinite number of possible values.

The probability that a standard normal random variable is not equal to a can be found using the complement rule again. P(Z ≠ a) = 1 - P(Z = a), where P(Z = a) = 0 (as mentioned above). Therefore, P(Z ≠ a) = 1.

Let's break down each part of your question and provide an explanation for each term:

a. The notation p(z < a) refers to the probability that a standard normal random variable (Z) is less than a certain value (a). In a standard normal distribution (with a mean of 0 and standard deviation of 1), this represents the area under the curve to the left of the value 'a'. To find this probability, you can refer to a standard normal table or use a calculator with a normal distribution function.

b. The probability that a standard normal random variable is greater than a (p(z > a)) can be calculated by subtracting the probability that the variable is less than a from 1 (since the total probability is always 1): p(z > a) = 1 - p(z < a).

c. In a continuous probability distribution like the standard normal distribution, the probability that a standard normal random variable is equal to a specific value (p(z = a)) is always 0. This is because there are an infinite number of possible values, and the probability associated with each individual value is negligible.

d. The probability that a standard normal random variable is not equal to a (p(z ≠ a)) is essentially the complement of the probability that it is equal to a. Since p(z = a) is 0 in a continuous distribution, the probability that the variable is not equal to a is 1: p(z ≠ a) = 1.

Learn more about probability at: brainly.com/question/30034780

#SPJ11

The method to convert a vector from component form to linear form to trigonometric form is shown below.

Given that;

To convert a vector from component form to linear form to trigonometric form.

Let a linear form of expression is,

⇒ x + iy

Now, We can change it into trigonometric form as;

Plug x = r cos θ, y = r sin θ

And, θ = tan ⁻¹ (y/x)

Hence, We get;

⇒ x + iy

⇒ r cos θ + i r sin θ

⇒ r (cos θ + i sin θ)

Learn more about the function visit:

https://brainly.com/question/11624077

#SPJ1

The graph of the function f(x) = |-x - 10| + 5 in the context of the situation is added as an attachment

From the question, we have the following parameters that can be used in our computation:

The function f(x) = |-x - 10| + 5

Where

Using the above as a guide, we have the following:

We plot the minutes on the x-axis and the distance on the y-axis

The graph of the function is added as an attachment

Read more about functions at

https://brainly.com/question/27915724

#SPJ1

Complete question

Kalani met her friend at a park for a morning run. The function f(x) = |-x - 10| + 5 models their run distance from Kalani's apartment, in miles, x minutes after they started running. Graph the function in the context of the situation.

The given statement is false. The standard deviation is a measure of the spread of data from its mean value. It is always a positive value or zero, but it cannot be negative.

If the standard deviation is zero, it means that all the data values are the same, and there is no variability. However, if the standard deviation is small, it means that the data points are close to the mean value, while a large standard deviation indicates that the data points are widely spread out from the mean. Therefore, it is important to understand that the standard deviation cannot be negative and should always be interpreted as a positive value or zero.

The given statement is: "The standard deviation can be negative." To determine whether this statement is true or false, let's briefly review the concept of standard deviation.

Standard deviation is a measure of the dispersion or spread of a set of values in a dataset. It is calculated using the square root of the variance, which is the average of the squared differences from the mean.

Since variance involves squaring the differences, it will always be a positive value or zero. Consequently, when taking the square root of a positive value or zero, the result will never be negative.

Therefore, the correct answer to the statement "The standard deviation can be negative" is False. Standard deviation cannot be negative as it represents the dispersion of values in a dataset.

Learn more about standard deviation at: brainly.com/question/23907081

#SPJ11

The solutions are explained below.

the value of x is : x = 58.63 m

Here, we have,

Given that,

Jeremy and Leslie are each flying their own drones in a flat field with their drones hovering between the two of them.

Height of Jeremy's drone = 30 m

Height of Leslie's drone = x m

h / 70 = sin 53°

h = 70 × sin 53°

h = 57.34

Therefore, Leslie's drone is higher than Jeremy's drone.

Difference of height = 57.34 - 30 = 27.34 m

27.34 / x = tan25°

x = 58.63 m

Hence, the value of x is : x = 58.63 m

Learn more about trigonometric ratios, click;

brainly.com/question/25122825

#SPJ1