Use the data in the table to suggest why the doctor should NOT prescribe pencillin.

Use The Data In The Table To Suggest Why The Doctor Should NOT Prescribe Pencillin.

Answers

Answer 1

Answer: The doctors should not prescribe penicillin because bacteria become resistant to penicillin over time.

Explanation:

Penicillin is used as a therapy for bacterial infections. The synthesis of the enzyme penicillinase, which disintegrates the penicillin molecule and renders it useless, is what led to the development of the resistance in bacteria.

Penicillin was administered to patients with throat infections. It was observed that the patients developed immunity to the antibiotic and rendered it ineffective.

To know more about penicillin- https://brainly.com/question/11849121


Related Questions

The bar chart here shows the relative speed of light through different types of media, air, water, and oil. Using the representation shown here, predict the speed of light through different media. Select ALL that correctly predict the light’s speed. A. Light traveling through glass would have a speed slower than that of light in air. B. Light traveling through a vacuum would have a speed higher than that of light in air. C. Light traveling through quartz would be faster than all speeds shown through the selected media. D. Light traveling through translucent plastic would be faster than all shown speeds through the media listed. E. Light traveling through humid air would be slower than the light through air but faster than light through water shown here.

Answers

Based on the information in the chart, light traveling through glass would have a speed slower than that of light in the air (option A), and light traveling through a vacuum would have a speed higher than that of light in the air (option B).

How does the speed of light change depending on the medium?

Based on the graph, the denser the medium is the slower the light moves. For example, light is much faster when traveling in the air than when traveling in oil. Due to this, the true statements are:

Light travels slower through glass than in the airLight would travel faster through a vacuum.

Learn more about light in https://brainly.com/question/29994598

#SPJ1

Drag each tile to the correct box.

The diagrams represent different phases of the menstrual cycle. Arrange these diagrams of the female reproductive system in the correct order in which the menstrual cycle progresses, starting with day 1 of the menstrual cycle.

Answers

The correct order in which the menstrual cycle progresses, starting with day 1 of the menstrual cycle, is as follows:

MenstruationFollicular Phase:OvulationLuteal Phase

How do we explain?

The first phase of the menstrual cycle is the follicular or proliferative phase. Occurs from day 1 to day 14 of the menstrual cycle, based on an average menstrual cycle of 28 days.

The follicular phase begins on the first day of menstruation and lasts 13-14 days, ending with ovulation.

During the Luteal phase, the empty follicle transforms into the corpus luteum, which produces progesterone to prepare the uterus for potential implantation.

Learn more about menstrual cycle at:

https://brainly.com/question/1483249

#SPJ1

How would you explain the key concepts for the CWA in less than two minutes?

Answers

Answer:

Explanation:

vPoint Source - a source of water discharged to surface water through a discrete point - generally through a pipe, ditch, or channel.

Nonpoint Source - Nonpoint sources, such as parking lots or athletic fields, discharge runoff water to groundwater or surface water; runoff does not come from  a pipe, ditch, or channel. These sources may contain pollutants such as pesticides, motor oil, and soaps.

Navigable Waters of the United States  For the purposes of the Clean Water Act, the term "navigable waters" includes:

all waters used in commerce, including groundwater;

all interstate waters including wetlands, mudflats, and sand-flats; and

all other waters such as lakes, rivers, streams, wetlands and sloughs.

EPA policy states, "The majority of facilities in the U.S. have the potential to discharge to navigable waters."  The Supreme Court decision in (2006) requires the Army Corps of Engineers and the EPA to determine whether there is a "significant nexus" between a navigable waterway and an area a spill might affect.  In June of 2007, EPA and the Army Corps of Engineers released provisional interpretive guidance regarding the "significant nexus” question. According to this guidance, the agencies will assert jurisdiction over traditional navigable waters, wetlands adjacent thereto, and relatively permanent tributaries thereof. The agencies will generally not assert jurisdiction over swales and ditches that lack routine water flow. Finally, the agencies will apply the "significant nexus" requirement and make a case-by-case, fact-specific analysis on impermanent tributaries and other wetlands.

Additional executive orders were issued 2015 in 2019.  Under the 2019 proposal, traditional navigable waters, tributaries to those waters, certain ditches, certain lakes and ponds, impoundments of jurisdictional waters, and wetlands adjacent to jurisdictional waters would be federally regulated. It also details what are not "waters of the United States," such as features that only contain water during or in response to rainfall (e.g., ephemeral features); groundwater; many ditches, including most roadside or farm ditches; prior converted cropland; stormwater control features; and waste treatment systems.

Could the requirement for one or more NPDES Discharge Permit apply to my campus?

If your campus discharges pollutants directly to navigable waters of the United States through a point source, you must obtain an NPDES permit or redirect the flow of the waste.

Stormwater releases from certain activities require an NPDES permit. The most common activities on college campuses requiring NPDES permits for stormwater are construction activities disturbing more than 1 acre, hazardous waste storage areas operating under the Resource Conservation and Recovery Act permit system, steam-generating power plants, and airports. See Stormwater section below.

Regulations issued by local water authorities, or Publicly Owned Treatment Works (POTWs), not NPDES permits, govern discharges into sanitary sewer systems. See Sewer Use (POTW) section below for more information about requirements for using POTWs for commercial or industrial waste disposal.

What do I have to do related to NPDES Discharge Permits?

Determine where wastewater flows from buildings and processes on your campus. Any industrial or commercial operation (e.g., ice rink melt pits, floor drains, and vehicle wash stations) that discharge into a water of the United States may require an NPDES permit. If required, you must obtain such a permit from the appropriate regulatory agency, probably your state environmental agency.

French drains, dry wells, and septic system leach fields are different from point source discharges because they do not immediately affect surface water. Some state and federal environmental agencies manage these systems under the Underground Injection Control program, part of the Safe Drinking Water Act. See Safe Drinking Water Act for more information.

Details of NPDES

The walls of the large intestine absorb (a) water (b) digested food (c) undigested food (d) cellulose​

Answers

Answer:

a) water

Explanation:

digested food is mostly absorbed in the small intestine.

The walls of the large intestine absorb a)water.

In the large intestine, the water from the undigested food is absorbed and the remaining undigested food is sent to the rectum.

From the rectum, the undigested food materials are egested from the anus as feces.

To learn more about the large intestine,

https://brainly.com/question/3476947


A car starts from rest and gains a velocity of 20 m/s in 10 s. Calculate acceleration and average velocity. ​

Answers

The acceleration of the car is 2 m/s².

The average velocity of the car is 2 m/s.

How to calculate acceleration ?

The equation acceleration = (final velocity - beginning velocity) / time can be used.

Given:

Initial velocity (u) = 0 m/s (since the car starts from rest)

Final velocity (v) = 20 m/s

Time (t) = 10 s

Using the formula, we can substitute the values:

acceleration = (20 m/s - 0 m/s) / 10 s

acceleration = 20 m/s / 10 s

acceleration = 2 m/s²

Therefore, the acceleration of the car is 2 m/s².

You can use the following equation to determine the average velocity: average velocity = total displacement / total time.

The initial position and the final position are identical since the automobile begins at rest. As a result, the displacement and the ultimate position are equal.

Given:

Displacement = 20 m

Time (t) = 10 s

Using the formula, we can substitute the values:

average velocity = 20 m / 10 s

average velocity = 2 m/s

Therefore, the average velocity of the car is 2 m/s.

Learn more about substitute here : brainly.com/question/26094713

#SPJ1

DNA is formed using four kinds of base subunits. In a double-stranded segment of DNA, the percentage of the base C is 18%. What is the approximate percentage of base T?

Answers

Answer:

The correct option is C 32%

According to Chargaff’s rule in a DNA molecule A = T and G = C and A + G + C + T = 100%. Here cytosine (C) is 18% hence G = 18%

A + T = (100 – 36)%

A + T = 64%

A = 32%

Explanation:

Other Questions
Use both Cultural Relativism and Kantianism theories either to complement or contradict each other in answering below guestions Case study: The income of companies that design, create, and market online games that are on-going, depends on the number of subscribers/players they attract. Consumer-players have a choice of many online games,thus each company is motivated to be competitive,creating and enhancing their version of the experience for the subscribing gamers. Especially in role-playing adventure games there is no set length to the gaming sessions. When playing such role- playing games,it's easy to lose track of time and spend more time on the computer than originally planned, leading to questions and problems of addictive behavior. Some subscriber-players cause harm to themselves and others by spending too much time playing these games,yet the companies of the leading consumer games are profiting immensely,so the companies seem not to notice this outcome,or seem unmotivated by this 1. Do you think that the companies should bear some responsibility and foresight for the situation's consequence or outcome to gaming- consumers? 2. As tech-ethics IT specialists.do vou think the technology specialists -- the designers and coders and marketers --of such online games also bear some ethical responsibility for such a gaming-consumer outcome? 3. If you choose to say the IT specialists do bear some responsibility, explain that via the 2 ethical theories,also saying what the IT specialists should do, and why? 4. If you choose to say the IT specialists do not bear responsibility, explain that via the 2 ethical theories and why? Which of the following is NOT a property of an antagonist drug?a. receptor attractionb. receptor blockingc. receptor activationd. receptor inhibitionWhich drug component in plasma is therapeutically effective?a. cleared drugb. attached drugc. bound drugd. free drugThe role of GLUT-4 includes:a. permitting insulin out of the cellb. permitting insulin into the cellc. permitting glucose out of the cellFor patients receiving dialysis, one of the aims apart from removal of excess fluid volume is to:a. remove serum calciumb. remove serum potassiumc. increase serum phosphated. increase extracellular fluid volumed. permitting glucose into the cellYou would assess the client with severe breathlessness for which acid-base imbalance?a. respiratory acidosisb. respiratory alkalosisc. metabolic acidosisd. metabolic alkalosisA client with an exacerbation of COPD is admitted to the hospital. She can only talk in single words and her respiratory rate is 38 breaths per minute, oxygen saturation is 87% on 4 litres per minute (LPM) of O2. When assessing the client, the nurse should:a. conduct a complete health historyb. complete a comprehensive physical examinationc. delay assessment until clients respiratory distress is resolvedd. focus assessment on the respiratory system and distressWhat is the most appropriate nursing intervention to promote airway clearance for a patient who has thick sputum?a. assist the patient to splint the chest with a pillow when coughingb. encourage the patient to restrict fluid intakec. instruct the patient to keep nasal oxygen cannula in placed. encourage the patient to mobiliseEarly signs of respiratory depression include which of the following?a. decreased respiratory rate and paradoxical breathingb. cyanosis and hypertensionc. decreased respiratory rate and decreased oxygen saturationsd. shallow respirations and tachypnoea Answer this easy geometry question. P=? 8. (25 Points) Use T flip-flops to design a 3-bit counter which counts in the sequence: 000, 001,011, 101, 111, 000, ... a) Draw the transition graph; b) Form the transition table; c) Derive the input equations; d) Realize the logic circuit; e) Draw timing diagram for the counter. Assume that all Flip-flops are initially LOW. An advertisement banner measuring 5m X 4m is to be floodlighted by means of projectors placed at a distance of 1m from the banner. The average illumination required is 100lux. 5) ii) iii) Which lamp is used for the design and why? Assuming waste light factor of 1.2, maintenance factor of 0.5 and coefficient of utilisation of 0.5, determine the number of projectors used. Determine the beam angle of the projector. Code Distribution The project's code distribution is available in the file "Java Project1.zip." Download the code distribution and import it as you have imported our class examples. The code distribution provides you with the following: programs - A package (folder) where you will find shells for three programs (Perimeter, EvenNumber, FormulaEval, and PickColor) that you need to implement. tests - A package (folder) where you will find public tests. expected Results - A folder that has the expected results for each of the public test. results - A folder that the results generated by your code for each of the public tests. Specifications You need to implement four programs: Perimeter, EvenNumber, FormulaEval, and PickColor. We have already provided shells (files with just the main method) in the programs package. For this project you are expected to use good variable names and good indentation. 1. Perimeter Program - Write a program that will compute the perimeter of a rectangle. The program will read the length and width values and display the perimeter. The following is an example of running the program. The example illustrates the messages used to read data and to display the perimeter. Enter length 3 Enter width: 2 Perimeter is: 10 1 Project #1, Java Basics/Conditionals 2. EvenNumber Program - Write a program that reads an integer value y, checks if the number y is even or odd. The following are examples of running the program. The examples illustrate the messages to use to read data and the messages to display when y is even, and when y is odd. Enter y: 12 12 is an Even number Enter y: 15 15 is an odd number 3. Formula Eval -Write a program that will compute the values of a formula. The program will read the value of x and display a message. The formula to solve is: Y=X-X-9 The message should say one of three things: i) If the value of Y is positive, the message should say The Value of Y is positive If the value of Y is negative, the message should say "The Value of Y is negative The following is an example of running the program. The example illustrates the messages used to read data and to display the value of y. Enter X: 3 Y = -3 The value of Y is negative 4. PickColor Program - Write a program that computes a CSS color. We define a CSS color as a string that starts with a # character and it is followed by three pairs of 2 characters. The possible pairs of two characters will be 00 or FF. A color is defined by two characters for red. two characters for green, and two characters for blue. For example, #FF0000 is just red, whereas #00FFFF is the combination of green and blue. Your program will ask users whether they want to have red as part of the CSS color. If the user answers "Yes", FF will be used for the red component; otherwise 00 will be used. The program will then ask the user whether they want both green and blue in the CSS color. If the user answers "Yes", FFFF will be used for green and blue; otherwise 0000 will be used. As you can see not all possible color choices can be generated (e.g., #FF00FF). The following are examples of running the program. The examples illustrate the messages to use when reading data and displaying the result. Notice that in addition to use "Yes", users can use "Yeah" to accept a choice. Any other value entered is considered a "No" answer. Do you want red? (Yes/Yeah/No): Yes Do you want green and blue? (Yes/Yeah/No): No 2 Project #1, Java Basics/Conditionals Final Color: #FF0000 Do you want red? (Yes/Yeah/No): No Do you want green and blue? (Yes/Yeah/No): Yes Final Color: #00FFFF Submission Project Screen capture of input and output of the system Are the functions below acceptable or unacceptable to be wave functions? Justify for each of them. (i) 1 (x) = e^x5(ii) 2 (x) = cos(x2/3) Given these memory chips: M1: 128K x 2 M2: 128K x 2 M3: 128K x 4 M4: 128K x 8 M5: 256K x 2 M6: 256K x 2 M7: 256K x 4 All the memory chips come with tristate bidirectional data input/output connections. Each chip has the following ports: address a, data d, enable en, and write wr. Note that if wr=0, the chip works in a read mode. Let's say our goal is to build a memory system 2" x n using all of these chips. They must all be completely utilized. -What are the possible values of m? For each value of m, find the corresponding value of n. -If n = 8, show a complete diagram (including the decoding logic) for the memory system. Suppose that the graph of a function f is known. Then the graph of y=f( x) may be obtained by a reflection about the __-axis of the graph of the function y = f(x). V -axis of the Suppose that the graph of a function f is known. Then the graph of y=f(-x) may be obtained by a reflection about the graph of the function y = f(x). System calls... A. are only called by processes to perform inter-process communication B. are a programming interface for processes to access functionality exposed by the kernel C. are called by kernel threads to access devices D. are only used to configure devices A venturimeter with an inlet diameter of 200 mm and throat diameter of 100 mm is employed to measure the flow of water. The reading of the differential manometer connected to the inlet and throat is 180 mm of mercury. Given that the specific gravity of mercury is 13.6 and the coefficient of discharge is 0.98, determine the volume flowrate and mass velocity at the throat. (b) Water flows through a nozzle as shown below. If the velocity of the fluid at the inlet and outlet are 5 ms and 25 ms respectively, calculate the absolute pressure at point 1 in kPa. 1. A point charge of 10 nC is located at (2, 10, 3) while line Y= 2, Z=2 carries a uniform charge of 5 nc/m.Estimate the Potential V at (4, 5, 6) taking the V = 0 V at (0,0,0) n order to measure cement for making concrete, a small size contractor made a wooden box measuring five cubic feet. How many bags of cement can he use one time when using his box? How much weight of cement in the box we are talking about? b) A contractor was designing concrete mix proportion for 10,000 psi concrete. He was maintaining water/cement (W/C) of 0.90. Is he on the right track? What range of W/C ratio will you suggest? c) What field test is used to check the workability of the concrete mix? What is workability of concrete? A slump test has no meaning if. ............ additive is added to the concrete mix. When you call pop on a stack, the element at the elements is removed. a. Top b. Bottom Chapters 1-2: Please read chapters 1-2 in your 4th Edition textbook. Also, please read (from the Folio page), "The Ups and Downs of Peer Review". 1. What is peer review? 2. Why is peer review important? 3. What is evidence based practice (EBP)? 4. What are some characteristics of clinicians who adopt EBP? 5. What are the driving forces behind EBP? 6. What are some general characteristics of desirable evidence? 7. What is necessary for a specific piece of evidence to be considered reliable? What does this mean? 8. How can one decrease bias in a research study? 9. What is meant by the "hierarchy of evidence"? Why is this important to keep in mind when evaluating evidence? 10. What are some limitations of evidence hierarchies? 11. What is "best available evidence", and what are three potential sources of it? Suppose that hydrogen atoms are prepared in the n = 2 energy level, Calculate the wave-length of light emitted by these excited atoms when returning to the ground state. Describe the Mandelbrot set by discussing the difference in the points in the 'inside' points, points close to the boarder, and points further out from the boarder. Write a brief algorithm of how you would code a program like the one in the video 'whats so special about the Mandelbrot Set' in week 4 topic introduction. Scientists Discover Ebola Virus in West African Bat. Describe two social or cultural factors that affected the risk of people in the Democratic Republic of Congo and how these factors influenced the scope of the Ebola if you place your hand in warm sunshine the sensory information from your hand will travel through the_____________________________________on the way to the _________________________________ a static reservoir 10 m above a hydroelectric power station with a flow rate of 20 m' s' has a maximum available power of 1000x9.81x10x20= 1.96 MW (mega watts).