This is a technique for measuring anything directly by comparing it to something else, then balancing the value of the thing to be measured against a starting
Explain about the Direct comparison method?The value is immediately calculated on the component being measured when using the direct technique of measurement, which compares the quantity to be measured with a standard (an accepted unit of measurement).
The degree of agreement between two methods' measured values is gauged by their method comparison. In cases when there are discrepancies between measurements, the term "method" is used in a generic sense and can refer to various measurement systems, measurement techniques, laboratories, or any other variable you choose.
When you specifically measure the property of the target object, you are doing a direct measurement. To know your height, for example, you would use a measuring tape to take an exact measurement.
To learn more about measurement refer to:
https://brainly.com/question/26160352
#SPJ4
Hwan also wants to determine the depreciation balance for the first year and the last year of the useful life of the product hardware. Determine these amounts as follows: In cell E23, enter a formula using the SYD function to calculate the depreciation balance for the first year. b. Use Year 1 (cell C18) as the current period. In cell E24, enter a formula using the SYD function to calculate the depreciation balance for the last year. d. Use Year 6 (cell H18) as the current period.
In Menlo Park, California, Hwan Rhee is debating whether to launch ChargeAll, a software firm that will create full-room wireless chargers for any kind of mobile electronic device.
In Menlo Park, California, Hwan Rhee is debating whether to launch ChargeAll, a software firm that will create full-room wireless chargers for any kind of mobile electronic device. In order to examine the financial information for a startup loan that would pay for the components and product manufacture, Hwan is using an Excel worksheet. He requests your assistance in fixing mistakes and performing financial computations in the worksheet.
Visit the worksheet for loan analysis. Hwan requests that you fix the mistakes in the worksheet before he can compute the principal and interest payments on the loan.
To know more about software click here:
https://brainly.com/question/985406
#SPJ4
question: write a method that computes and prints, for every position p/node of a tree t, the element of p followed by the height of p's subtree. add this method to class binary tree
The method that computes and prints the element of p followed by the height of p's subtree for each position p/node of a tree t and include this method in the binary tree class is given below
What is an element?A single component that is a part of a larger group is called an element. In computer programming, for instance, an array may contain various elements (indexed), each of which may be stored and used independently.
For instance, the names array in the Perl code below has five elements (names), and it uses a foreach to introduce itself to each name.
#include <bits/stdc++.h>
using namespace std;
/* A binary tree node has data, pointer to left child
and a pointer to right child */
class node {
public:
int data;
node* left;
node* right;
};
/* Compute the "maxDepth" of a tree -- the number of
nodes along the longest path from the root node
down to the farthest leaf node.*/
int maxDepth(node* node)
{
if (node == NULL)
return 0;
else {
/* compute the depth of each subtree */
int lDepth = maxDepth(node->left);
int rDepth = maxDepth(node->right);
/* use the larger one */
if (lDepth > rDepth)
return (lDepth + 1);
else
return (rDepth + 1);
}
}
Learn more about element
https://brainly.com/question/28813109
#SPJ4
during the blank (110ma-85ma), the tempo of seafloor spreading is thought to have increased causing oceans to spill over onto continents and flood some of north america.
During the mid-Cretaceous period (110Ma-85Ma), the tempo of seafloor spreading is thought to have increased, causing oceans to spill over onto continents and flood some of North America.
What are the three Cretaceous Period?A geological time period known as the Cretaceous lasted from 145 to 66 million years ago (MYA). It is the longest and third-longest epoch of the Mesozoic Era. It is the longest geological period in the entire Phanerozoic, lasting roughly 79 million years. The name comes from the Latin word creta, meaning "chalk," which is common in the second half of the time period. It is frequently shortened to K for its Kreide counterpart in German.Lower and Upper Cretaceous series, or Early and Late Cretaceous epochs, are the two divisions of the Cretaceous. Older literature occasionally divides the Cretaceous into the Neocomian (lower/early), Gallic (middle), and Senonian (upper/late) groups.To learn more about mid-Cretaceous period, refer to
https://brainly.com/question/11390551
#SPJ4
which is a characteristic of low-level wind shear as it relates to low-level temperature inversions?
A characteristic of low-level wind shear as it relates to low-level temperature inversion is that it allows airspeed to go beyond normal climb and approach speed.
What is Wind Shear?Wind shear, also known as wind gradient, is a variation in wind speed and/or direction across a short distance in the atmosphere. Vertical or horizontal wind shear is commonly used to describe atmospheric wind shear.
Wind shear is significant since it might jeopardize your flight's safety. The greatest issue in the high atmosphere is turbulence, but at lower altitudes, particularly during landing/takeoff, the key concern is avoiding mishaps induced by increases in wind shear.
Learn more about Wind Shear:
https://brainly.com/question/13634214
#SPJ1
In addition to transporting goods to market, what was another benefit of the growth of railroads?.
Other benefit of the growth of railroads is that they produced job opportunities to the people.
What are the Advantages of Railway Transport?
Advantages:
1. Dependable: When compared to other modes of transportation, the railway transport has the greatest advantage of being the most dependable mode of transportation as it is least affected by weather conditions like rain, fog, etc.
2. Better Organized: Compared to other modes of transportation, rail transportation is the best organized. It follows set schedules and routes. Compared to other modes of transportation, it offers a more reliable, consistent, and regular service.
3. High Speed over Long Distances: Other than airways, it has the highest speed over long distances of any mode of transportation. It is the ideal option for long-distance traffic because of this.
4. Employment Prospects: Both skilled and unskilled laborers have more employment options thanks to the railways. The railroads are the primary source of income for more than 16 lakh people.
To know more about railways, check out:
https://brainly.com/question/11433327
#SPJ4
Draw parallels between cyber operations components in defense sector and another section (e.g. finance, health, etc.). Argue why cyber operations should not be allowed in non-military sectors
We show that despite the fact that cyber operations haven't yet been very effective in producing clear results or escalatory, recent policy adjustments and strategy announcements have been.
These modifications are based on the hazardous misconception that attacking is a quick and efficient approach to stop other countries from hacking the United States. New regulations for approving offensive preemptive cyber tactics run the risk of going over the line and altering the rules of the game. Political conflict and coercive diplomacy have historically taken place in cyberspace. A cyber policy with an offensive posture is risky, ineffective, and undermines online norms. Cyber strategy and policy must begin with a thorough understanding of the field, not with hypothetical scenarios.
Learn more about field here-
https://brainly.com/question/18564178
#SPJ4
Problem The beginning of a free space bitmap after the disk partition is first formatted looks like this: 1000 0000 0000 0000 (the first block is used by the root directory). Using a contiguous allocation approach, the system always searches for free blocks starting at the lowest-numbered block, so after writing file A, which uses five blocks, the bitmap looks like this: 1111 1100 0000 0000 0000. Show the bitmap after each of the following additional actions: a) File B is written, using six blocks b) File A is deleted c) File C is written using 7 blocks d) File B is deleted e) File D is written using 4 blocks
Previous question
The new bitmap is 1110 0000 0001 0000 after some use. The system always looks for free blocks beginning at using a contiguous allocation technique.
The new bitmap is 1110 0000 0001 0000 after some use. The system always looks for free blocks beginning at using a contiguous allocation technique.
(a) Five blocks are used to create File B. 1111 1111 1111 0000
b) File A is deleted in batch 1000 0001 1111 0000
c) Writing is done in file C using eight blocks.
1111 1111 1111 1100
d) File B is removed. 1111 1110 0000 1100
Some file systems track allocated sectors using free-space bitmaps as one technique. Some contemporary file systems use sophisticated or hybrid implementations of free-space bitmaps, even though the most basic design is extremely inefficient.
To know more about bitmap click here:
https://brainly.com/question/21449716
#SPJ4
Determine the force P needed to suspend the 100-lb weight. Each pulley has a weight of 10 lb. Also, what are the cord reactions at A and B?
The force P needed by the pulleys to suspend the weight is 25.
The cord reactions at A and B are 25 and 60 respectively.
Define pulleys.
Pulleys are wheels mounted on an axle or shaft that is intended to support the movement and direction change of a taut cable or belt as well as the transfer of power from the shaft to the cable or belt.
To transmit energy and motion, pulleys can be employed individually or in tandem. Sheaves are the name given to pulleys with grooved rims. The fundamental benefit of using pulleys is that it requires less effort to raise weights than it would otherwise.
To learn more about pulleys, use the link given
https://brainly.com/question/20288356
#SPJ4
In the circuit of Fig. P4.10, a bridge circuit is connected at the input side of an inverting op-amp circuit. (a) Obtain the Thévenin equivalent at terminals (a, b) for the bridge circuit. = Vo/Us. (b) Use the result in (a) to obtain an expression for G (c) Evaluate G for Ri = R4 = 100 2, R2 = R3 = 101 2. and Rf 100 kS2. Rf a R2 RA R3
Because its gain is always negative, the inverting operational amplifier is essentially a constant or fixed-gain amplifier that produces a negative output voltage.
This extremely high gain, though, is of little use to us because it makes the amplifier unstable and difficult to control because even the smallest input signals—a few microvolts (V)—would be enough to cause the output voltage to saturate and swing toward one of the voltage supply rails, causing the output to become completely uncontrollable.
An appropriate resistor connected across the amplifier from the output terminal back to the inverting input terminal can be used to reduce and regulate the overall gain of the amplifier because the open loop DC gain of an operational amplifier is extremely high. The result is what is commonly known as negative feedback.
To know more about output click here:
https://brainly.com/question/13736104
#SPJ4
FILL IN THE BLANK. if the task is to write firewall specifications for the preparation of a(n) ___ , the planner would note that the deliverable is a specification document suitable for distribution to vendors.
If the task is to write firewall specifications for the creation of a(n) RFP, the planner would note that the deliverable is a specification document appropriate for distribution to vendors.
What is a request for proposal (RFP)?A request for proposal (RFP) is a document that a company—often a large corporation or government agency—posts to request formal bids from vendors for the IT solution they require. Each assessment factor that will be used to evaluate a vendor's proposal is listed in the RFP along with the client's specifications. A standard request for proposals (RFP) contains background information on the issuing organization and its lines of business (LOBs), a list of specifications detailing the ideal solution, and evaluation criteria outlining how offers will be assessed. An explanation of the scope of the work or the range of services to be offered is contained in the request for proposals (RFP) part known as the statement of work.The tasks and deadlines for the deliverables that the chosen bidder must meet are listed in this section. Along with instructions on how to create a proposal, the request for proposals also contains this information. Details on the proposal format and guidelines for creating and organizing the RFP response are provided in this section.To Learn more About request for proposal refer to:
https://brainly.com/question/12996542
#SPJ4
This problem provides practice using a while True loop.Write a function named twoWords that gets and returns two words from a user. The first word is of a specified length, and the second word begins with a specified letter. The function twoWords takes two parameters:i. an integer, length, that is the length of the first word andii. a character, firstLetter, that is the first letter of the second word. The second word may begin with either an upper or lower case instance of firstLetter. The function twoWords should return the two words in a list. Use a while True loop and a break statement in the implementation of twoWords.The following is an example of the execution of twoWords:print(twoWords(4, 'B')) A 4-letter word please :twoA 4-letter word please: oneA 4-letter word please : fourA word beginning with B please : appleA word beginning with B please: pearA word beginning with B please: banana['four', 'banana']
The first letter of the second word may appear in either capital or lowercase. The two words in a list should be returned by the function twoWords.
The goal is to create a value-returning function that takes a morse code argument and returns its English translation. We mapped the morse code into the english alphabet, and I created a dict that contains every letter of the morse alphabet. We're going to use morse letters, thus I'm calling this the encoding dict.
Each morse letter corresponds to an english letter to form a function. We're going to name our function translate, and we're going to pass it the input string. I'll give it a longer name. Again, feel free to issue this dictation. It is contained within this function. I'm going to break up Morris' incoming message into its words because we know there are three blanks.
To know more about function click here:
https://brainly.com/question/5245372
#SPJ4
Write a G-code based on Fig. 1 (units are millimeter) where the solid line denotes a toolpath. The toolpath starts from P, and ends Pg. - P4 30.00 00 SS 30.00 D P (P) - PG (Ps)(0, 0) Ỷ 30 00 70.00 Fig. 1 Toolpath
The G-code where the solid line denotes a toolpath is
G91
G01 X30 Y5
G01 X40
G01 Y30
G03 X-20 Y20 R20
G01 X-40
G01 Y-30
G01 X20 Y20
G01 Z2
G00 X0 Y0
What is a toolpath?The single most crucial element in CNC milling is called a toolpath, which is the data that the milling machine uses to direct the drill bit through the material.
The way that toolpaths function is like a vector; they have a direction, a size, and a position in space. The direction and location of the milling bit in space are directly reflected by these. Toolpaths come in two flavors: 2D and 3D.
An equivalent of a cookie cutter operation, 2D toolpaths for cutting from 2D "sheet" material only operate in the X and Y directions.
In comparison to 3D objects, 2D cuts can be machined much more quickly.
Because the machine only works from the top down, it is very limited in the variety of 3D forms it can fabricate. 3D toolpaths work in the X, Y, and Z directions and are for sculpting and excavating a material, which is a laborious process because each layer must be removed.
Learn more about toolpath
https://brainly.com/question/13259895
#SPJ4
FILL IN THE BLANK. by early 1818 karl friedrich schinkel had produced a new design for the in berlin to sit atop the old foundations between existing french and german churches.
By early 1818 Karl Friedrich Schinkel had produced a new design for the Altes Museum in berlin to sit atop the old foundations between existing french and german churches.
What do you mean by design template?
Customizable pre-made designs and documents are known as design templates. Templates are frequently created to adhere to strict guidelines or specifications in order to maintain consistency across users and media. You have the option of creating bespoke templates for later use or using pre-design templates from libraries and websites.
Design templates include color palettes, master slides and titles with personalized formatting, and styled fonts created for a specific "look." The slide master and color scheme of the new template is substituted for those of the previous presentation when a design template is applied to a presentation.
To learn more about a design, use the link given
https://brainly.com/question/29403600
#SPJ4
after a disastrous descent into enemy territory, our hero has found himself completely weaponless, yet only slightly disheveled. in a feat of inconceivable (perhaps even implausible) strength, he pries a perfectly intact chain gun from its mountings beneath his chopper's wreckage and cradles it in his arms. as enemy troops swarm in, he unleashes a 1626 spm (shots per minute) barrage that stops them dead in their tracks. if the muzzle velocity is 3,474 ft/s and each bullet weighs 0.23-lb, what average force f is required of our hero to hold the weapon in place? neglect, among other things, the mass of both the ammunition belt and the discarded casings. round your answer to the nearest lb.
The speed of a bullet as it exits the barrel is known as the muzzle velocity of a firearm.
What is the muzzle velocity formula?
A bullet's kinetic energy and momentum can be calculated using the formulas E k = (1/2) m v 2 and momentum p = m v if its mass m and muzzle velocity v are known.
Black powder musket muzzle velocities ranging from about 120 m/s (390 ft/s) to 370 m/s (1,200 ft/s) to more than 1,200 m/s (3,900 ft/s) in contemporary rifles with high-velocity cartridges like the. 220 Swift and. 22 Long Rifle.
A 180-grain (12 g) bullet fired from a. 357 magnum handgun may produce 580 foot-pounds of force at the muzzle (790 J). Depending on how the cartridge was made, a 110-grain (7.1 g) bullet could only provide 400 foot-pounds force (540 J) of muzzle energy.
To learn more about muzzle velocity refer to
https://brainly.com/question/14243531
#SPJ4
When copper is added to body-centered cubic iron, the lattice parameter change is minimal; i.e.. the atomic size of Cu is almost the same as that of Fe. The shear modulus of bcc iron increases by about 2.5% when 10 at.% Cu is dissolved in it.(For Fe, G = 8.1 times 1010 N/m2.) Use the Fleischer model to predict the solid-solution strengthening of bcc Fe by Cu. Plot your results as a graph of delta tau y vs. at.% Cu in solid solution; the concentration scale should cover the range of Cu solubility in bcc Fe at room temperature as well as compositions corresponding to supersaturated alloys. Do you believe Cu could be used to effectively solid solution strengthen iron and steel?
Tin-base materials are typically utilized as the base material for bearing metals because they have high bearing qualities.
Currently, the direct extrusion of feedstock for the production of anodes with solid and hollow cross-sectional geometries for electrochemical plating and the production of feedstock for the manufacture of soft and special soft solders on transverse extrusion presses are the only uses for the extrusion of semifinished tin alloy products. Tin is also used to make rolled strips, as a raw material for high-capacity electrical condensers, and to roll-clad lead-base strips for organ pipes, wine bottle caps, and holiday decorations.
Learn more about extrusion here-
https://brainly.com/question/29516010
#SPJ4
technician a says that oat coolants are based on propylene glycol. technician b says that hoat stands for hybrid organic acid technology. which technician is correct?
Technician A and B both are correct. An internal combustion engine and one or more electric motors, which utilise energy stored in batteries, work together to power hybrid electric cars.
The battery of a hybrid electric car cannot be charged by plugging it in. Instead, the internal combustion engine and regenerative braking are used to charge the battery. Instead of the usual 3.0-4.20V/cell, the battery operates at 30-80% state-of-charge (SoC), or around 3.5-4.0V/cell for Li-ion. When the gasoline engine isn't running, hot coolant is typically kept in an insulated coolant storage tank to heat the passenger compartment. Additionally, the air conditioner compressor will be electric so that it operates even when the gasoline engine is off; servicing this will call for special oil.
Learn more about engine here-
https://brainly.com/question/13799616
#SPJ4
What is as light as a feather, but even the world’s strongest man couldn’t hold it for more than a minute?.
The breath, in my opinion, must be the solution. Even the strongest man in the world cannot hold it for very long since it is lighter than a feather. Jay Sanders affirms
What can you say to make someone stiff as a board but light as a feather?Typically, the game involves a group of people raising a single person with only their fingers while reading out the individual's cause of death (or just saying, "She is dead"), and then repeating the phrase, "Light as a Feather, Stiff as a Board." The person in the middle will eventually become levitated.The strongest man on earth is the one who is most by himself, according to Henrik Ibsen. The strongest men are the most independent, or, to put it another way, those who do not depend on others to survive, according to this quotation.By holding two 20 kg (44 lbs) axes in each hand at full extension for one minute and 18 seconds, he broke the previous record for the "Viking Hold" and contributed to his victory. Despite tearing tendons in an arm during the contest, Hall was confident he would qualify for the World's Strongest Man in September.To learn more about Light as a Feather refer to
https://brainly.com/question/27878616
#SPJ4
A ship, carrying freshwater to a desert island in the Caribbean, has a horizontal cross-sectional area of 2800 m2 at the waterline. When unloaded, the ship rises 6.00 m higher in the sea. How much water was delivered?
16,800 cubic m volume of water was delivered to a desert island in the Caribbean which has a horizontal cross sectional area of 2800 m² on ship.
How to calculate volume of water ?Each millilitre of water has a capacity of one cubic centimetre (1cm3). Some atoms have different sizes and masses. The order in which specific atoms appear on the periodic table depends on how many protons are present in an atom's nucleus. Even though an atom is smaller than another atom, it may nonetheless have more mass. How much water is within a container depends on its shape and how much of it is there. To determine the volume of a square or rectangular vessel, you need to know its length, width, and depth.A cross sectional area of 2800 sq m rose 6 m,
Thus 2800 x 6 = 16800 cubic m of seawater was un displaced
Surface density varies by location and temperature.
A standard figure is 1023.6 kg / cubic m. or 102.36 times denser than pure fresh water.
Therefore the 16800 cubic m of sea water displaced weighed more than the same volume of fresh water.
The volume of fresh water then was greater, 16800 x 102.36 / 100 = 17196.48 cubic meter.
Ignoring the density difference, i.e. 16800 cubic meter .
To learn more about Volume refer :
https://brainly.com/question/2707799
#SPJ4
For the beam and loading shown, write the equations for the internal shear force V and bending moment Mas function of x and then draw the shear and moment diagrams. Also state the values of the internal shear force and bending moment at x = 1.4 m and x = 4.9 m. (Answer: At x = 1.4 m, V = 8.51 kN and M = -23.5 kN m and at x = 4.9 m, V = 2.93 kN and M = -2.77 kN m] Note: The best way to handle this is the integration method. Remember there is a reaction moment at the wall at A. That moment acts like an applied moment and that means there is an initial bending moment which is opposite in sign than the applied moment. In other words, the bending moment shifts immediately upward from 0 at x = 0 if the reaction moment at the wall is CW and downward if is CCW. w 1 w = k1x – k2x2 1.8 kN/m 1 4.1 m -2.9 m
The placement of the bars in a beam will depend on the shear force and the bending moment diagram.
The diagram of bending and shearing forces shows the moments and shearing forces acting on any part of the beam. The layout of reinforcement is dependent on the size and sign (or direction) of diagrams in order to withstand these active forces. For instance, shear reinforcement or stirrups are tightly spaced on the region of the beam where shear force is greater. Additionally, maximal longitudinal reinforcement is supplied in the area with the highest bending moment. Similar to this, some longitudinal reinforcement is reduced when the influence of the bending moment decreases, when the direction of the bending stresses changes, or when the stresses in the web reinforcement increase.
Learn more about stresses here-
https://brainly.com/question/13261407
#SPJ4
diesel exhaust fluid is being discussed. technician a says that it includes distilled water. technician b says that it contains 32.5% urea. which technician is correct?
There are several byproducts produced during the combustion process of a diesel engine that can have a negative impact on health.
These byproducts include particulate particles, carbon monoxide, and nitrogen oxide (NOx) (PM). Contrary to widespread belief, DEF and cow and bat urine are not real things. The urea used in the creation of DEF is synthesized from ammonia and carbon dioxide, and urea manufacturing facilities are frequently located next to other ammonia generating facilities, such as coal and natural gas refineries. Diesel Exhaust Fluid (DEF), which is made up of 67.5 percent deionized water and 32.5 percent urea. For those who enjoy trivia, urea is thought to have been the first organic substance to be created from inorganic substances.
Learn more about generating here-
https://brainly.com/question/13799616
#SPJ4
A. Determine the equations of the elastic curve using the coordinates x1 and x3. EI is constant.
Express your answers, separated by a comma, as an expression in terms of the variables x1, x3, a, w, and EI and any necessary constants.
B. What is the slope at B and displacement at C? EIEI is constant.
Express your answers, separated by a comma, as an expression in terms of the variables w, a, and EI and any necessary constants.
The linear divergence of the beam's longitudinal axis—the axis that runs parallel to the cross sectional area of the beam—from its initial position is referred to as deflection.
The linear divergence of the beam's longitudinal axis—the axis that runs parallel to the cross sectional area of the beam—from its initial position is referred to as deflection. There are two different ways that a beam might deviate: linearly and angularly.
The former, which is a linear deviation, is known as the beam's deflection, and the latter, an angular deviation, is known as the beam's slope.
A beam is said to be deflected when its longitudinal axis, which is normal to the cross sectional area of the beam, deviates linearly from its initial position.
To know more about deviation click here:
https://brainly.com/question/13905583
#SPJ4
Calculate the number of clock cycles required for testing a full-scan design with n test vectors. Assume that the full-scan design has m scan chains, each having the same length L, and that scan testing is conducted in the way shown in Figure 2.14bPI V1:PI V2Pl SE ½:PPI PO observation PPO observation S: shift operation/C: capture operation / H: hold cycle FIGURE 2.14
The two most popular design-for-testability (DFT) methods at the moment for ensuring circuit testability and product quality are scan and logic built-in self-test (BIST).
The various basic and sophisticated logic BIST architectures that are presented in this chapter enable the digital circuit to do self-test on-chip, on-board, or in-system. Architectures for test compression that aim to cut down on test data volume and application time are reviewed. This also gives an overview of cutting-edge low-power and at-speed test compression architectures used in business. This chapter also looks at prospective random-access scan architectures designed to keep the advantages of scan and logic BIST while further reducing test power dissipation and application time.
Learn more about speed here-
https://brainly.com/question/28988558
#SPJ4
It is desired to increase the output of a spark-ignition engine by either (a) raising the compression ratio from 8 to 10 or (b) increasing the inlet pressure from 1.0 atm to 1.5 atm. Using the constant-volume cycle as a mode l for engine operation, which procedure will give: a. The highest pressure of the cycle b. The highest efficiency c. The highest map Assume k = 1.3 and m_f Q_HV/m_0 T_1 = 9.3 T_)c - 1/T_c When a diesel engine was designed for = 0.75 at full load, estimate the maximum permissible value of for the turbocharged engine at full load if the air pressure. The compression ratio is 16. The fuel heating value is 42.5 MJ/kg fuel. Assume k = 1.35, that the air is 16. The fuel heating value is 42.5 MJ/kg fuel. Assume k = 1.35, that the air temperature at the start of compression is 325 K, and (F/A) = 0.0666.
It is desired to increase the output of a spark-ignition engine by increasing the inlet pressure from 1.0 atm to 1.5 atm.
Over-expanded cycles are engine cycles when the effective compression ratio is less than the effective expansion ratio (see the explanation of the effective compression ratio under Engine Fundamentals). In current practice, either early (EIVC) or late (LIVC) intake valve shutting is used to perform over-expanded cycles.
Temperature lowering at the end of the compression stroke is the main result of EIVC and LIVC. A longer expansion ratio and increased efficiency are produced by using greater geometric compression ratios, which are made possible by the lower temperature.
In honor of their respective inventors, Ralph Miller and James Atkinson, over-expanded cycles are also sometimes referred to as Miller or Atkinson cycles. These words are not consistently used in the literature.
To know more about compression click here:
https://brainly.com/question/14828391
#SPJ4
estimate the length of a flat key required to transmit a torque equal to the elastic torque capacity of a round shaft of diameter d. assume that the key and shaft are made of the same ductile material and that the key is tightly fitted at its top and bottom. compare this result with the length of square key required and suggest a possible reason why a flat key might be preferred in some cases.
The length is 2.4d
What do you mean by torque?A torque is an angular force that tends to generate rotation along an axis, which could be a fixed point or the center of mass. Torque can also be conceived of as a spinning object's capacity to overcome turning resistance, such as a gear or a shaft.
Ancient Romans gave these necklaces the name "torque" by describing them as twisted and spiral screw-shaped using the Latin word "torquere," which also means "twisting" and "turning."
To ensure a good load distribution over the entire key length when the shaft becomes twisted when loaded in torsion, the key length should be less than approximately 1.5 times the shaft diameter.
To learn more about torque refer to:
https://brainly.com/question/17512177
#SPJ4
if the system is released, use conservation of energy to determine the speed of mb just before it strikes the ground. assume the pulley bearing is frictionless
The calculated speed is 3.8 m/s. The system's gravitational potential energy and kinetic energy combined will always remain constant.
So: E=50.0 kg*2.5 m*9.8 m/s2
= 1225 kg*m2/s2
= 1225 J
Since m1 will be lifted when m2 falls, m1 will experience some gravitational potential energy.
E=27.0 kg*2.5m*9.8 m/s2
= 661.5 kg*m2/s2
= 661.5 J E
= 1225 J - 661.5 J
= 563.5 J
Therefore, the system will have 563.5 Joules of kinetic energy when m2 hits the ground. sqrt(E/39.7 kg)
= v sqrt(563.5 J/39.7 kg)
= v sqrt(14.19395466 m2/s2)
= v 3.767486518 m/s
= v E
= 39.7 kg v2 E/39.7 kg
= v2
Since that is the lowest precision datum available, round to 2 significant figures to arrive at a speed of 3.8 m/s.
Learn more about speed here-
https://brainly.com/question/28988558
#SPJ4
identify the reactants and the products of the preparation step to the urea cycle. drag the appropriate items to their respective bins.
This energy-dependent process only takes place in the mitochondria and cytoplasm of the liver.
Lethargy, slurred speech, cerebral edema, and asterixis are examples of clinical symptoms that can occur when this process is not functioning properly and toxic ammonia (NH3) builds up inside the body. Here, we'll go through the urea cycle's fundamental physiology. Hepatocytes' mitochondria host the start of the urea cycle, which concludes in the cytoplasm. Below each given step, a schematic illustration of the subsequent reactions will be provided. It should be noted that although the enzyme responsible for each step won't be visible, it is mentioned in the paragraph before. The body uses the urea cycle to transform harmful ammonia into urea. Whether it results from a high-protein diet or deaminations, ammonia is a byproduct of protein catabolism.
Learn more about cycle here-
https://brainly.com/question/13040255
#spj4
a study examined the relationship between the sepal length and sepal width for two varieties of an exotic tropical plant. varieties x and o are represented by x's and o's, respectively, in the following scatterplot.
Sepal length and width have a negative correlation when examining each variation separately.
Explain about the Sepal length and width?For Versicolor, the correlation coefficient between sepal length and sepal width is 0.53, indicating a somewhat upward (positive) linear relationship. For Virginica, the correlation coefficient between sepal length and sepal width is 0.46, indicating a shaky upward (positive) linear relationship.
The pericarp and sepals cover the seeds, preventing them from going dormant. The fruits are distributed by wind and contain two to five long wings (elongated sepals). Sepal length, sepal width, petal length, and petal width are the four input characteristics for describing the three kinds of flowers.
The group of petals known as the corolla is made up of sepals, which are referred to collectively as the calyx. The perianth of the flower is made up of these two components.
To learn more about Sepal length and width refer to:
https://brainly.com/question/16969449
#SPJ4
To determine the effect of the temperature dependence of the thermal conductivity on the temperature distribution in a solid, consider a material for which this dependence may be represented as k=k_{o}+a Tk=k o +aT where k_{o}k o is a positive constant and a is a coefficient that may be positive or negative. Sketch the steady-state temperature distribution associated with heat transfer in a plane wall for three cases corresponding to a>0, a=0, and a<0.
When a $>0$ :
[tex]$\frac{d T}{d x}=$[/tex]increases[tex]$\mathrm{K}$[/tex] decrease when [tex]$\mathrm{x}$[/tex] is increases.
When a <0 :
[tex]$\frac{d T}{d x}=$[/tex] decrease[tex]$\mathrm{K}$[/tex]increases when [tex]$\mathrm{x}$[/tex] is increases.
What is Fourier law?The process by which heat is transmitted from an object's hotter end to its colder end is known as conduction. The term "thermal conductivity" refers to an object's capacity to transfer heat, and it is represented by the letter k. Along a temperature gradient, heat flows naturally.According to Fourier's law, the area at right angles to the gradient through which heat flows is directly proportional to the negative gradient of temperature and the time rate of heat transfer.Given that
[tex]$$k=k o+a T$$[/tex]
From Fourier law
Heat transfer per unit volume given as
[tex]$$q=-\frac{K d T}{d x}$$[/tex]
[tex]$\mathrm{x}$[/tex] measured from left hand side of wall.
[tex]&q=-\frac{\left(K_o+a T\right) d T}{d x} \\[/tex]
[tex]&q d x=-\left(K_o+a T\right) d T[/tex]
By integrating
[tex]&\int q d x=\int-\left(K_o+a T\right) d T \\[/tex]
[tex]&q x=-\left(K_o T+\frac{a T^2}{2}\right)+C[/tex]
Where C is constant
We can that temperature of wall is varying as parabolically with distance x When a=0 :
[tex]$$q x=-\left(K_o T\right)+C$$[/tex]
This is become straight line.
[tex]$$\frac{d T}{d x}=\text { Constnat }$$[/tex]
When a $>0$ :
[tex]$\frac{d T}{d x}=$[/tex]increases
[tex]$\mathrm{K}$[/tex] decrease when [tex]$\mathrm{x}$[/tex] is increases.
When a <0 :
[tex]$\frac{d T}{d x}=$[/tex] decrease
[tex]$\mathrm{K}$[/tex]increases when [tex]$\mathrm{x}$[/tex] is increases.
To learn more about Fourier law refer to:
https://brainly.com/question/14668420
#SPJ4
Assume that to spell check a large file, 100.000 instructions are needed. The instructions in the program are broken down into 4 different classes, and each class requires its own number of clock cycles to execute. Specific information is given in the table below. Instruction Class Branch Store Load ALU / R-type Clock Cycles per Instruction Number of Instructions 3 10.000 20,000 5 30,000 4 40.000 4 Part A 10 POINTS) If the total execution time for this program is found to be 2 seconds, what is the clock rate (expressed in KHz) of the computer on which it was run? Part B(5 POINTS) Now, assume that as part of the 100,000 instruction spell check, 20% of all the original number of Load instructions are immediately followed by an ALU/R-type instruction that uses the data that was just loaded. To speed up the original spell check program, we are contemplating adding a new type of instruction to our architecture : an ALU instruction where one of the source operands is a value from memory. Ex: add rd, rs1, mem[address This new instruction will replace the previous 2 instruction sequenceſLoad followed by ALU/R type) It will take 7 clock cycles. Will this change offer any speedup over the original design? If so, how much? You may assume that the clock rate does not change and your answer to this question does not depend on your answer to Part A. Please upload your work showing all relevant calculations
The most common units for measuring clock speed are MHz (megahertz, or millions of pulses per second) or GHz (gigahertz, or billions of pulses per second)
Explain about the clock rate of the computer?Your CPU's clock speed, which is expressed in GHz, counts the cycles it completes per second (gigahertz). Technically speaking, a "cycle" is a pulse timed by an internal oscillator, but for our purposes, they serve as a fundamental concept that clarifies the pace of a CPU.
Generally speaking, a gaming processor should have a clock speed between 3.5 GHz and 4.0 GHz, but high single-thread performance is more crucial. In other words, your CPU is capable of comprehending and finishing a single task.
A processor's clock speed is how quickly it completes all of its processing cycles in a second. It also goes by the name of clock rate.
To learn more about clock rate of the computer refer to:
https://brainly.com/question/29509224
#SPJ4
in the future, astronomers believe that the milky way galaxy has additional collisions in store. which of the following nearby galaxies is eventually going to collide with our own?
Galaxies undergo changes as well. In around 4 billion years, the Milky Way and the nearby Andromeda Galaxy will join due to their collision track.
Our own Milky Way galaxy and the nearby spiral Andromeda galaxy are slated to collide in a billion years. Our solar system and planet Earth are not in danger of being destroyed, but the Sun will probably be hurled into a new area of our galaxy. Over time, astronomers have tracked their motions. Galaxies evolve by collisions, which is a crucial part of that process. A starburst galaxy will occur as a result of the gas being compressed as a result of the collision if at least one galaxy rich in interstellar matter is involved.
Learn more about compressed here-
https://brainly.com/question/22170796
#SPJ4
