Answer:
14 moles of oxygen needed to produce 12 moles of H2O.
Explanation:
We are given that balance eqaution
[tex]2C_2H_6+7O_2\rightarrow 4CO_2+6H_2O[/tex]
We have to find number of moles of O2 needed to produce 12 moles of H2O.
From given equation
We can see that
6 moles of H2O produced by Oxygen =7 moles
1 mole of H2O produced by Oxygen=[tex]\frac{7}{6}[/tex]moles
12 moles of H2O produced by Oxygen=[tex]\frac{7}{6}\times 12[/tex]moles
12 moles of H2O produced by Oxygen=[tex]7\times 2[/tex]moles
12 moles of H2O produced by Oxygen=14 moles
Hence, 14 moles of oxygen needed to produce 12 moles of H2O.
The amount of oxygen required for the combustion of ethane to produce 12 moles of water is 14 moles.
How are the moles produced in reaction calculated?The moles of oxygen produced in the reaction can be given from the stoichiometric law of the balanced chemical equation.
The balanced chemical equation for the combustion of ethane is:
[tex]\rm 2\;C_2H_6\;+\;7\;O_2\;\rightarrow\;4\;CO_2\;+\;6\;H_2O[/tex]
The 6 moles of water are produced from 7 moles of oxygen. The moles of oxygen required to produce 12 moles of water are:
[tex]\rm 6\;mol\;H_2O=7\;mol\;Oxygen\\12\;mol\;H_2O=\dfrac{7}{6}\;\times\;12\;mol\;O_2\\ 12\;mol\;H_2O=14\;mol\;O_2[/tex]
The moles of oxygen required to produce 12 moles of water are 14 moles.
Learn more about moles produces, here:
https://brainly.com/question/10606802
write Balance chemical reaction for preparation of chlorine with or without application heat
Answer:
2KMnO4(aq) + 16HCl(aq) ------> 2MnCl2(aq) + 2KCl(aq) + 8H2O(l) + 5Cl2(g)
Explanation:
Chlorine is a diatomic halogen gas known for its greenish-yellow colour. It has a pungent smell and is only moderately soluble in water.
It is a very reactive gas and is never found in free state in nature.
Chlorine can be prepared in the laboratory by oxidation of hydrochloric acid using KMnO4 as follows;
2KMnO4(aq) + 16HCl(aq) ------> 2MnCl2(aq) + 2KCl(aq) + 8H2O(l) + 5Cl2(g)
The set up does not need to be heated.
. Gastric juice, the digestive fluid produced in the stomach, contains hydrochloric acid, HCl. Milk of Magnesia, a suspension of solid Mg(OH)2 in an aqueous medium, is sometimes used to neutralize excess stomach acid. Write a complete balanced equation for the neutralization reaction, and identify the conjugate acid-base pairs.
Answer:
Mg(OH)2 + 2HCI = MgCI2 + 2H2O
Explanation:
Please correct me if I am wrong
what type of properties change ina physical change? Give an example to support your answer?
pls quick who will give the answer first will get the brainliest
Explanation:
We can observe some physical properties, such as density and color, without changing the physical state of the matter observed. Other physical properties, such as the melting temperature of iron or the freezing temperature of water, can only be observed as matter undergoes. A physical change physical change involves a change in physical properties. Examples of physical properties include melting, transition to a gas, change of strength, change of durability, changes to crystal form, textural change, shape, size, color, volume and density.hope it helps.stay safe healthy and happy.The pKa of an acid can be determined through _____ (reduction, titration, filtration) with a strong base.
Gradually increase the volume of the base, stopping _____ (before, as, after) the equivalence point is reached.
The pKa of the acid is equal to the pH at the _____ (equivalence point, midway volume to the equivalence point, maximum volume).
Answer:
The pKa of an acid can be determined through titration with a strong base.
Gradually increase the volume of the base, stopping before the equivalence point is reached.
The pKa of the acid is equal to the pH at the midway volume to the equivalence point.
Explanation:
An acid HA dissociates in water as follows:
HA ⇄ H⁺ + A⁻ Ka
So, it produces hydrogen ions (H⁺) and a conjugate base (A⁻). The concentrations of HA, H⁺ and A⁻ at equilibrium determine the constant Ka. The pKa is calculated as:
pKa = -log Ka
The relationship between the pH of the solution and the pKa of the acid is described by the Henderson-Hasselbalch equation:
pH = pKa + log ([A⁻]/[HA])
The pKa can be experimentally determined by acid-base titration, in which a strong base is added to the acid solution. As the base is added, the acid HA is neutralized and the conjugate base A⁻ is formed. Thus, the concentration of the acid ([HA]) increases and the concentration of the conjugate base ([A⁻] decreases. The equivalence point is reached when the total amount of acid is neutralized with the added base. Before reaching the equivalence point, at the halfway point, half of the acid is neutralized and converted into the conjugate base. Thus:
[A-] = [HA] ⇒ log [A-]/[HA] = log 1 = 0 ⇒ pH = pKa
We measure the pH at that point and it is equal to the pKa of the acid.
How many ml of 0.24 M HBr solution are needed to react completely with 10.00 ml of 0.24 M Sr(OH)2 solution
Answer:
10mL
Explanation:
Using the formula as follows:
CaVa = CbVb
Where;
Ca = concentration of acid, HBr (M)
Cb = concentration of base, Sr(OH)2 (M)
Va = volume of acid, HBr (Litres)
Vb = volume of base, Sr(OH)2 (Litres)
According to the information given in this question;
Ca = 0.24M
Cb = 0.24M
Va = ?
Vb = 10.0ml
Using CaVa = CbVb
0.24 × Va = 0.24 × 10
0.24Va = 2.4
Va = 2.4 ÷ 0.24
Va = 10mL
10mL of HBr is needed.
Which group has one valence electron
Answer:
Alkaline earth metals or akali metals
According to Newton's law of universal gravitation, how do the masses of two
objects relate to the gravitational force between them?
A. As either mass increases, the gravitational force between them
increases.
B. As either mass increases, the gravitational force between them
decreases.
C. Gravitational force increases only when both masses increase.
D. Gravitational force increases only when both masses decrease.
Answer:
As either mass increases, the gravitational force between them
increases.
Explanation:
According to Newton's law of universal gravitation;
F α m1m2/r^2
That is, the force between two masses in a gravitational field is directly proportional to the product of the two masses and inversely proportional to their distance apart.
Hence, as either of the masses increase, the force of gravitation between the two masses increases. Hence the answer.
Methanal is the simplest aldehyde, with one carbon atom. Draw the structural model for methanal (using C and H).
[tex] {\bold{\red{\huge{\mathbb{QUESTION}}}}} [/tex]
Draw the structural model for methanal (using C and H and O).
[tex] \huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}[/tex]
First place the C and then make a double bonded O atom with it then fill H to complete all valence spaces
Enter a balanced equation for the reaction between solid nickel(II)(II) oxide and carbon monoxide gas that produces solid nickel and carbon dioxide gas. Express your answer as a chemical equation. Identify all of the phases in your answer.
Answer: A balanced equation for the given reaction is [tex]NiO(s) + CO \rightarrow Ni(s) + CO_{2}(g)[/tex].
Explanation:
The reaction equation will be as follows.
[tex]NiO(s) + CO \rightarrow Ni(s) + CO_{2}(g)[/tex]
Number of atoms on the reactant side is as follows.
O = 2C = 1Number of atoms on the product side is as follows.
Ni = 1O = 2C = 1Since number of atoms on both the reactant and product sides are equal. Hence, the reaction equation is balanced.
Thus, we can conclude that a balanced equation for the given reaction is [tex]NiO(s) + CO \rightarrow Ni(s) + CO_{2}(g)[/tex].
Compound X has the same molecular formula as butane but has a different boiling point and melting point. What can be concluded about Compound X?
A It is a four-carbon alkene or alkyne.
B It is an optical isomer of butane.
C It is a geometric isomer of butane.
D It is a structural isomer of butane.
need this for gradpoint:)
Answer:
d
Explanation:
how to separate and purify the Flufenamic acid from the aqueous layer
Answer:
Explanation:
H
18. Which of the following solutions will have the highest boiling point?
A. 0.50 mol CH20. in 1.0 kg of water
B. 0.50 mol NaCl in 1.0 kg water
C. 0.50 mol HF in 1.0 kg of water
D. 0.50 mol AICI, in 1.0 kg water
Answer:
highest boiling point.
Explanation:
Hello there!
In this case, according to the given information, it turns out necessary for us to recall the definition of colligative properties, more specifically that of boiling point elevation, defined in terms of the temperature change, van't Hoff's factor, molality of the solution and boiling point elevation constant:
[tex]\Delta T_b=i*m*K_b[/tex]
In such a way, since all the given solutions have the same molality and solvent (water), they all have the same m and Kb, for which we focus on the van't Hoff's factor which is 1 for CH2O (nonionizing), 2 for NaCl (Na and Cl ions are released), 2 for HF (H and F ions are released) and 3 for AlCl₃ (one Al and three Cl ions are released).
Therefore, since D. 0.50 mol AICI, in 1.0 kg water has the greatest van't Hoff's factor, we infer it has the highest boiling point.
Regards!
What do phase diagrams demonstrate?
Select all that apply.
how the melting and boiling points of a substance change with pressure
how much heat will increase the temperature of a gram of a substance by 1°C
the pressure and temperature conditions in which a substance exists as a liquid, solid, or gas
a comparison of the temperature of a substance to the heat absorbed over time
Answer:
this answer is for first one
Explanation:
A higher evalations, where the atmospheric pressure is much lower, the boiling point increase with increased pressure up to the critical point where the gas and liquid properties become identical
A cylinder contains 26.5 L of oxygen gas at a pressure of 1.7 atm and a temperature of 280 K. How much gas (in moles) is in the cylinder?
Answer:
The appropriate answer is "1.96 mol".
Explanation:
The given values are:
Volume,
V = 26.5 L
Pressure,
P = 1.7 atm
Temperature,
T = 280 K
Now,
The number of moles (n) will be:
= [tex]\frac{PV}{RT}[/tex]
By substituting the values, we get
= [tex]\frac{1.7\times 26.5}{0.0821\times 280}[/tex]
= [tex]\frac{45.05}{22.988}[/tex]
= [tex]1.96 \ mol[/tex]
Draw the Lewis structure for the polyatomic formate anion. Be sure to include all resonance structures that satisfy the octet rule.
Answer:
Lewis structure of polyatomic formate anion.
Explanation:
To draw Lewis structure for any chemical species,
1)Count the total number of valence electrons present in it.
This can be obtained by adding valence electrons of each constituent atom.
2)Arrange those valence electrons in such a way that each atom should attain eight electrons around it to satisfy octet theory.
The structure of formate ion and its Lewis structure are shown below:
HCOO- is the formate ion.
It has total:
1+4+6+6+1 = 18 valence electrons.
Since, hydrogen has one, carbon has four and oxygen has six valence electrons and the charge of the anion is one.
Arrange this 18 electrons in such a way that each atom should get 8 electrons around it.
Resonance structures of formate ion:
If mass of an empty 9.4 mL pycnometer is 10.3 and the mass of the same pycnometer with an unknown liquid is 20.1. Determine the density of the unknown liquid to the correct number of significant figures in g/mL
Answer:
1.04 g/mL
Explanation:
Applying,
D = (m-m')/V................. Equation 1
Where D = Density of the unknown liquid, m = mass of the pycnometer when filled with unkwon liquid, m' = mass of the empty pycnometer, V = volume of the empty pycnometer
From the question,
Assuming the mass are in grams
Given: m = 20.1 g, m' = 10.3 g, V = 9.4 mL
Substitute these values into equation 1
D = (20.1-10.3)/9.4
D = 9.8/9.4
D = 1.04 g/mL
Given 200ul of a 0.5mg/ml stock solution of BSA, how much do you pipet into a test tube so that you are adding 5ug of BSA to the test tube
Answer: [tex]10\mu L[/tex] of volume needs to be pipetted out in the test tube.
Explanation:
We are given:
Mass of BSA to be formed = [tex]5\mu g=0.005mg[/tex] (Conversion factor: [tex]1mg=1000\mu g[/tex]
Volume of stock solution = [tex]200\mu L=0.2mL[/tex] (Conversion factor: [tex]1mL=1000\mu L[/tex]
It is also given that for the mass of BSA is 0.5 g, the volume used up is 1 mL
In order to have, 0.005 g, the volume of stock solution needed will be = [tex]\frac{1mL}{0.5g}\times 0.005g=0.01mL=10\mu L[/tex]
Hence, [tex]10\mu L[/tex] of volume needs to be pipetted out in the test tube.
I don’t want to fail help
I need correct answer if u don’t know I will report
When the researcher compiled information which research method did they most likely utilize?
a) documentary
b) survey
c) participant observation
d) case study
Answer:
a
Explanation:
documentary is best researcher!.
1. Arrange the following groups in order of decreasing priority that would allow you to determine E/Z, or R/S. Provide a string of letters (e.g. abcd) as an answer with the highest priority listed first, lowest priority last:
a) -CH3 b) -CH2OH c) -CH2NH2 d) -CH2BR
2. Arrange the following groups in order of decreasing priority that would allow you to determine E/Z, or R/S. Provide a string of letters (e.g. abcd) as an answer with the highest priority listed first, lowest priority last:
a) -F b) -CH2OH c) -CHO d) -CH3
1) The order of decreasing priority would allow determining E/Z or R/S is "dbca".
2) The order of decreasing priority would allow determining E/Z or R/S is "acbd".
What is absolute configuration?Absolute configuration can be described as to the spatial arrangement of atoms within a chiral molecular entity. Absolute configuration in organic molecules, where carbon is bonded to four different substituents.
The absolute configuration has used a set of rules to describe the relative positions around the chiral center atom. The most common labeling method is the descriptors R or S where R and S refer to Rectus and Sinister.
The group with the highest atomic number will get the highest priority and the group with the lowest atomic number substituents will get the lowest priority. Therefore, the order of priority is -CH₂Br > -CH₂OH > -CH₂NH₂ > -CH₃.
Therefore, the order of priority for the second part is -F > -CHO > -CH₂OH > -CH₃.
Learn more about absolute configuration, here:
https://brainly.com/question/14365822
#SPJ5
We can use bond-line formulas to represent alkenes in much the same way that we use them to represent alkanes. Consider the following alkene: h5ch5e4 How many carbon atoms are sp2−hybridized in this alkene?
Answer:
2
Explanation:
The number of carbon atoms that are sp²-hybridized in this alkene is 2
Because all the single bonded carbon atoms in the alkene are sp²-hybridized
There are three(3) single formed via sp² orbitals and one ( 1 ) PI bond formed via Pure-P-orbital
attached below is the some part of the solution
What is Heisnberg's uncertainity principle? Why it make sense only for microscopic particles.
Answer:
The uncertainty principle is one of the most famous (and probably misunderstood) ideas in physics. It tells us that there is a fuzziness in nature, a fundamental limit to what we can know about the behavior of quantum particles and, therefore, the smallest scales of nature.
An electron-dot structure is a convenient method of representing
A. The complete electron configuration of the atom.
B. all electrons of the atom.
C. valence electrons of an atom.
D. core electrons of an atom.
Answer:
all electrons of the atom
What are the equipments needed to determine the density of a liquid in laboratory ?
Answer:
A hydrometer is a special device used to determine the density of liquids.
Explanation:
I hope this helps you. Have a nice day!
Why do gases act more ideal at
lower pressures?
Answer:
Gases act more ideal at lower pressure beacuse the attractive forces between molecules will decrease or become less significant compared to the empty space between them.
Explanation:
Generally, a gas behaves more like an ideal gas at higher temperature and lower pressure as the potential energy due to intermolecular forces becomes less significant compared with the particles "kinetic energy" and the size of the molecules become less significant compared to the empty space between them.
Attractive forces between molecules, decrease the pressure of a reak gas, slowing the molecules and reducing collisions with the walls.The higher the value of a gas, the greater the attraction between molecules and the more easily the gas will compress.
HOPE IT HELPS MUCHanswered by: John Glenly Pillazo Mahusay
Question 5: Energy Sources (12 points)
A. There are many ways to produce electricity. List two energy sources that generate electricity via a chemical reaction, and explain what kind of reaction each uses. (6 points)
B. Ethane is a common component of energy sources. Write the chemical formula for ethane. (2 points)
C. Write and balance the chemical equation for the combustion reaction of ethane. (4 points)
Answer:
See explanation
Explanation:
It is possible to generate electricity through a chemical reaction in two ways;
I) use of a voltaic cell where spontaneous chemical processes produce electrical energy.
ii) use of an electrolytic cell where non spontaneous chemical processes produce electrical energy.
The chemical formula of ethane is C2H6
The balanced chemical equation for the combustion of ethane is as follows;
C2H6 + 7/2 O2 ------> 2CO2 + 3H2O
Arrange these compounds by their expected boiling point. Highest boiling point Lowest boiling point CH3OH, CH3CI CH4.
Answer: The given compounds are arranged according to decreasing boiling point as [tex]CH_{3}OH > CH_{3}Cl > CH_{4}[/tex].
Explanation:
The temperature at which vapor pressure of a substance becomes equal to the atmospheric pressure is called boiling point.
Stronger is the intermolecular forces present the atoms of a molecule more heat will be required by it to break the bond between its atoms. Hence, more will the boiling point of the molecule.
In [tex]CH_{3}OH[/tex] (methanol), there is hydrogen bonding present which is a stronger force. So, it will have highest boiling point as compared to [tex]CH_{3}Cl[/tex] and [tex]CH_{4}[/tex].
In [tex]CH_{3}Cl[/tex] (chloroform), there is more electronegative atom attached (Cl) is attached to less electronegative atom (C and H). So, electrons are more pulled towards the chlorine atom. So, boiling point of [tex]CH_{3}Cl[/tex] is more than methane [tex](CH_{4})[/tex].
Thus, we can conclude that given compounds are arranged according to decreasing boiling point as [tex]CH_{3}OH > CH_{3}Cl > CH_{4}[/tex].
Suppose you are using distillation to separate cyclohexane and toluene. The boiling point of cyclohexane is ______ oC and the boiling point of toluene is ______ oC. Therefore, the liquid collected first should be ______
Please put an answer in each box.
Answer: The boiling point of cyclohexane is 81oC and the boiling point of toluene is 111oC. Therefore the liquid collected first should be
CYCLOHEXANE
Explanation:
In chemistry, there are various separation techniques that can be used to separate the components of a mixture and even isolate each of these components. A typical example of such separation techniques is DISTILLATION. This is a method of separation that makes use of different boiling points of liquids in a mixture. A mixture of any number of liquids could be separated as long as they boil at different temperatures. Example include:
--> mixture of cyclohexane (boiling point is 81°C) and toluene (boiling point is 111°C)
--> mixture of alcohol (boiling point is 78°C) and water (boiling point 100°C).
The process involves heating the mixture of liquids until the more volatile liquid ( that is the one with the lower boiling point) changes to vapour. The vapour is cooled by passing it through a condenser and collected in a liquid form known as distillate.
Therefore in the mixture of cyclohexane and toluene, the liquid collected FIRST should be CYCLOHEXANE.
Match the description with the type of precipitation being described.
1. Its formation requires very strong updrafts
2. Its formation requires falling through a layer of above freezing air
3. Precipitation from cumuliform clouds is typically of this nature
4. Precipitation from stratus clouds is typically of this nature
Options:
a. Hail
b. Drizzle
c. Shower
d. Freezing Rain
Answer:
1. Its formation requires very strong updrafts = a. Hail
2. Its formation requires falling through a layer of above-freezing air = d. Freezing Rain
3. Precipitation from cumuliform clouds is typically of this nature = c. Shower
4. Precipitation from stratus clouds is typically of this nature = Drizzle
Explanation:
Hail formation requires very strong updrafts, these updrafts are the upward moving air created in a thunderstorm. This period of noticeable thunderstorms creates hails.
Freezing rain requires the presence of warm air, it requires falling through a layer of above-freezing air to the colder air below to produce an ice coating on anything it drops on.
Showers are produced by cumuliform clouds which look like cotton balls. Since cumuliform clouds precipitate too, these clouds can have fluctuating rain in a day in the form of showers.
Drizzle which raises low visibility is considered a type of liquid precipitation since it also falls from a cloud. Drizzle which is obviously smaller in diameter when compared to that of raindrops, however, is common with stratus clouds.
Choose the substance with the higher entropy in each pair. Assume constant temperature, except in part (5)
(i) 1 mol of SO2(g) or 1 mol of SO3(g)
(ii) 1 mol of CO2(s) or 1 mol of CO2(g)
(iii) 3 mol of O2(g) or 2 mol of O3(g)
(iv) 1 mol of KBr(s) or 1 mol of KBr(aq)
(v) Seawater at 2°C or at 23°C
(vi) 1 mol of CF4(g) or 1 mol of CCl4(g)
Answer:
I) 1 mol of SO3(g)
2) 1 mol of CO2(g)
3) 3 mol of O2(g)
4) 1 mol of KBr(aq)
5) Seawater at 23°C
6) 1 mol of CCl4(g)
Explanation:
In molecules having greater numbers of atoms, there is an increase the number of ways by which the molecule vibrates thereby leading to a higher number of possible microstates and overall increase in entropy of the system. Hence, 1 mol of SO3(g) has a higher entropy than 1 mol of SO2.
Gases have a higher entropy than liquids and liquids have a higher entropy than gases.
Also, the greater the molecular weight of a molecule, the higher the entropy. Higher number of moles of a gas as well as the increase in temperature of a substance are also factors that lead to higher entropy.
Calculate the Experimental Molar Volume in L/mol of the Hydrogen gas, H2, if the volume of H2 at STP is 52.8 mL and the mass of Magnesium metal, Mg, used in the experiment is 0.055 g.
Answer:
The Experimental Molar Volume in L/mol of the Hydrogen gas=23.36L/mol
Explanation:
We are given that
Volume of H2 at STP=52.8mL
Mass of magnesium metal ,M(Mg)=0.055g
We have to find the Experimental Molar Volume in L/mol of the Hydrogen gas.
Molar mass of Mg=24.305 g/mol
Number of moles=[tex]\frac{given\;mass}{molar\;mass}[/tex]
Using the formula
Number of moles of Mg=[tex]\frac{0.055}{24.305}[/tex]moles
Number of moles of Mg=0.00226moles
Number of moles of Mg=Number of moles of H2
Number of moles of H2=0.00226moles
Molar volume of Hydrogen gas (H2)=[tex]\frac{volume\;at\;STP}{No\;of\;moles\;H_2}[/tex]
Molar volume of Hydrogen gas (H2)=[tex]\frac{52.8}{0.00226}mL/mol[/tex]
Molar volume of Hydrogen gas (H2)=[tex]\frac{52.8}{0.00226}\times 10^{-3}L/mol[/tex]
[tex]1L=1000mL[/tex]
Molar volume of Hydrogen gas (H2)=23.36L/mol
Hence, the Experimental Molar Volume in L/mol of the Hydrogen gas=23.36L/mol
