Using the graph below, match the following ranges of sucrose concentrations to their
corresponding descriptions of solution strength which depended on their measured
percentage mass change.
Change in mass
Either, hypotonic, hypertonic, or isotonic please help

Answer:

The most common snake venom enzymes include acetylcholinesterases, l-amino acid oxidases, serine proteinases, metalloproteinases and phospholipases A(2) .

The energy of a photon of each radiation is 1.9878 × 10²⁰, 1.9878 × 10¹⁸, and  1.9878 × 10¹⁶ respectively.

Wavelength is the distance among the same points (adjacent crests) within the adjoining cycles of a waveform signal propagated in space or along a wire.

Calculation:-

infrared = 1.0 x 10⁻⁶m,

C = λf

f = C/λ

   = 3 × 10⁸ / 1.0 x 10⁻⁶m

    = 3 × 10¹⁴

energy = hf

            = 6.626 × 10⁻³⁴ × 3 × 10¹⁴

            = 19.878 × 10²⁰

            = 1.9878 × 10²⁰

ultraviolet = 1.0 x 10⁻⁸ m,

C = λf

f = C/λ

   = 3 × 10⁸ / 1.0 x 10⁻⁸ m,

    = 3 × 10¹⁶

energy = hf

            = 6.626 × 10⁻³⁴ × 3 × 10¹⁶

            = 19.878 × 10¹⁸

            = 1.9878 × 10¹⁸

x-ray = 1.0 x 10⁻¹⁰ m.

C = λf

f = C/λ

   = 3 × 10⁸ /  1.0 x 10⁻¹⁰ m.

    = 3 × 10¹⁸

energy = hf

            = 6.626 × 10⁻³⁴ × 3 × 10¹⁸

            = 19.878 × 10¹⁶

            = 1.9878 × 10¹⁶

The wavelength is the distance between two wave crests, and it will likely be the same for troughs. The frequency is the number of vibrations that bypass over a given spot in a single 2d, and it is measured in cycles consistent with 2d (Hz) (Hertz).

Learn more about wavelengths here:-https://brainly.com/question/10728818

#SPJ4

The volume of the gas at a temperature of 25°C  is equal to 19.82 L.

The ideal gas law can be defined as the general equation to describe the state of a perfect gas. This equation represents the product of the volume and pressure is equal to the product of the gas constant, number of moles of gas, and absolute temperature.

The ideal gas equation for a gas can be represented as shown below:

PV = nRT

where n is the moles of gas, T is the temperature, P is the pressure,  V is the volume,  and R is the gas constant.

Given, the number of molecules of gas =  6.022 × 10²³

The number of moles of gas = 1mol

The temperature of gas, T = 25°C = 25 + 273.15 = 298.15 K,

The pressure of gas, P = 125 kPa = 1.233 atm

Gas constant, R= 0.082 atmL/K mol

Substituting the values n, R, P, and T in the equation, we get:

1.233 × V = 1 × 0.082 × 298.15

V = 19.82 L

Learn more about ideal gas equation, here:

brainly.com/question/3637553

#SPJ1

Dab the test strip out of the solution and gently compare it to a paper towel. The color of the strip closest to the kit's color chart indicates the free chlorine concentration.

A health inspector verifies that the chlorine concentration in the chlorine solution is at least 50 PPM. Best practice requires 100 PPM. Both values ​​can be seen on the test strip. Chlorine test strips are used for bleaching. It is also used to check the chlorine level in low-temperature dishwashers.

Look for strips with 0-200 ppm free chlorine. Concentration Not using enough disinfectant will result in inadequate microbial reduction. Too much disinfectant can be toxic. The test strip is dipped into the test solution until saturated and read after 60-90 seconds against the color chart on the label.

Learn more about The test strip here:-https://brainly.com/question/15236598

#SPJ4

Three ionic compounds are

(a) Sodium chloride

(b) Lithium nitride

(c) Magnesium oxide

An ionic compound in chemistry is a chemical complex made up of ions kept together by electrostatic forces known as ionic bonding. Although the molecule is mostly neutral, it contains positively charged ions known as cations and negatively charged ions known as anions.

Learn more about Ionic compounds here:

https://brainly.com/question/2687188

#SPJ4

Ensuring that sodium stays low inside cells thereby helping to drive sodium into the tubular epithelial cells from the tubular lumen is done by Na/K pump.

The membrane of every animal cell contains the enzyme known as the sodium-potassium pump. It serves a number of purposes in cell physiology. The enzyme Na+/K+-ATPase is active. Three sodium ions are exported and two potassium ions are imported for each ATP molecule used by the pump. A protein in the cell called the Na,K-ATPase pump controls Na+ and K+ gradients across the membrane. Cells are capable of producing electrical signals as gradients change. Keeping the axon prepared for the next signal is the responsibility of the sodium-potassium pump. The gradient drives numerous other pumps that connect the flow of sodium ions with the transportation of other molecules, like calcium ions or glucose, and aids in controlling the osmotic pressure within cells.

To learn ore about Na/K pump: https://brainly.com/question/14101500

#SPJ4

The advantages of the representing a molecule in its 3D model is it will show how the atoms are connected with each other the bond angle arrange in the space.

The molecule represent in the 3D model so, that it will well explain that how the atoms arranged in the space , how the atoms are connected to each other and the bond angle between the atoms.  3D model help us understand the chemical bond very easily. this makes the study vey easy.

Thus the most important advantage of the molecule representing in the 3D structure that it explain how the atoms are arranged in the space.

To learn more about 3D model here

https://brainly.com/question/20912945

#SPJ4

The effect of alcohol on the skills and abilities needed to hunt safely and responsibly is that Alcohol impairs vision.

Alcohol is described as a chemical substance found in drinks such as beer, wine, and liquor which is also found in some medicines, mouthwashes, household products, and essential oils.

High blood pressure, heart disease, stroke, liver disease, and digestive problems are the effects of alcohol to the human system. Not only that, the effect of alcohol on the skills and abilities needed to hunt safely and responsibly is that Alcohol impairs vision.

Learn more about alcohol at: https://brainly.com/question/27427140

#SPJ1

The order of entropy of the compounds from least to greatest is given in option a, CH₃F, CH₃Cl, and CH₃I

The compounds provided to us are,

CH₃F, CH₃Cl and CH₃I.

The entropy of a system or a gas is defined as the degree of randomness of a system.

The entropy of a gas depends on several factor, one of the factors is molecular mass of the gas.

The molecular mass of Fluoromethane CH₃F is 34 g/mol.

The molecular mass of Chloromethane CH₃F is 50 g/mol.

The molecular mass of Iodomethane CH₃F is 142 g/mol.

It is known that the entropy of the molecules with higher mass is less.

So, The correct order of entropy is

CH₃F < CH₃Cl < CH₃I

This order is represented in option a.

To know more about entropy, visit,

https://brainly.com/question/6364271

#SPJ4

The normal atomic orbitals are joined mathematically during the process of hybridization to create new atomic orbitals known as hybrid orbitals. Even if hybrid orbitals are not identical to regular atomic orbitals.

Atomic theory & quantum mechanics use the mathematical concept of a "atomic orbital" to describe the location and wavelike behavior of an electron within an atom. Each of those orbitals can contain a maximum of electron pairs, each with a unique spin quantum number s.

Within every of an atom's shells, various orbital combinations can be found. The n=1 shell has just s orbitals; the n=2 shell contains s and p orbitals; the n=3 shell contains s, p, and d orbitals; and the n=4 up shells include all four types of orbitals.

To know more about Atomic orbital visit:

https://brainly.com/question/28240666

#SPJ4

Magma generation, igneous intrusions, metamorphism, volcanic action, earthquakes, faulting, and folding are usually 5 pieces of evidence that support the theory of plate tectonics.

Tectonic plates are pieces of Earth's crust and uppermost mantle, collectively known as the lithosphere. The plates are around 100 km (sixty-two mi) thick and include principal types of cloth: oceanic crust (additionally known as sima from silicon and magnesium) and continental crust (sial from silicon and aluminium).

Plate tectonics is the typically prevalent scientific principle that considers the Earth's lithosphere to incorporate a number of big tectonic plates that have been slowly moving in view that about 3. four billion years ago.

Learn more about Tectonic plates here:

https://brainly.com/question/14307885

#SPJ4

The Molarity of hydrochloric acid is 5.708 M  containing mass of 19.0% and the density of the solution is 1.095 g/ml .

Molarity of the solution is defined as the amount of solute in moles divided by the volume of solution in liters.

               M = moles of solute/liters of solution.

we can calculate the molarity by dividing the number of moles of solute by the total volume of liters of solution.

let's assume 100g solution. the mass percentage of hydrochloric acid within the solution is 19.0%. and the density of the solution that is give is 1.095g/mole. substituting all these values we can calculate the molarity of the solution.

mass Hydrochloric acid,

100g solution x (19.00g / 100g solution) = 19.00g Hcl

moles of hydrochloric acid is ,

19.00g HCl x (1 mole Hcl / 36.45g HCl) = 0.52126

then the solution is,

100g solution x (1mL solution / 1.095g solution) x (1L / 1000mL) = 0.091324L

molarity HCl = 0.52126 mole / 0.091324L = 5.708M.

To learn more about the Molarity of the solution please visit:

https://brainly.com/question/26528084

#SPJ4

The most stable carbocation is formed by t-butyl bromide alkyl halide. Carbocation stability usually correlates with the number of methyl groups attached to the core carbon.

Chemicals called halides also include halogens. There are halides in nature, some of which are necessary to sustain human existence, such as salts and acids. Halides are found in minerals, organisms and plants. Table salt or NaCl is the most common halide.

while alkyl halide is halide that attach to alkyl group

Sodium, hydrochloride, and hydrochloride form a group of minerals known as halides. Minerals in this category include crystalline rock salts, sylvites, and carnallites, which contain only chlorides of important petrogens. Rock salt, also known as rock salt (NaCl), is the crystalline form of sodium chloride.

For more information on halides, please see:

Brainly.com/question/28384269

#SPJ4

Frameshift Mutation changes the Amino Acid sequence as it impact on the folding of the protein.

The sequence of a protein is determined by the DNA of the gene that encodes the protein. A change in the gene's DNA sequence may lead to a change in the amino acid sequence of the protein. Some mutations do not result in changes in the amino acid sequence of the encoded protein and can be described as silent mutations. Other mutations result in abnormal protein products. Mutations can introduce new alleles into a population of organisms and increase the population's genetic variation. Some mutations that change DNA bases do not have any effect on the sequence of amino acids in the protein. These mutations are called silent mutations and they do not affect the structure or function of the protein because there is no effect on the amino acid sequence. Frameshift mutation have a significant impact on the folding of the protein as they  changes the sequence of the amino acid.

To learn more about Mutation please visit:

https://brainly.com/question/17031191

#SPJ4

Climate observations are sourced from numerous meteorological and related observational networks and systems throughout the world.

Many meteorological and associated observational networks and systems exist around the world, and these are the sources of many of the climate observations. Observations of the atmosphere, ocean, and land-based systems must be gathered in order to describe the entire climate system.

Not all observations of the climate are created equal, and some are regarded as being of higher quality than others. As a result, a set of data (Metadata) detailing the circumstances under which a climate observation was made and that will give users information on how the observation should be interpreted and used should be associated with a climate observation, either directly or indirectly. Around the world, there are approximately 11,000 weather stations that measure land, air, and sea temperatures. Satellites, ships, and aircraft are also used to collect data.

Learn more about Climate here:

https://brainly.com/question/7665343

#SPJ4

The relationship between dipole moment and the distance between the charges is the dipole moment is directly proportional to the distance between the charges.

The dipole moment is equal to the product of the magnitude of the charges and the distance between the charges. the expression for the dipole moment is given as follows:

dipole moment = charge × distance of charges

     u                   =     Q      ×     r

so, the the distance between the charges is directly proportional to the dipole moment . if the distance between the charges increases the dipole moment is also increases. if the distance between the charges decreases the dipole moment also decreases.

To learn more about dipole moment here

https://brainly.com/question/29568953

#SPJ4

An aqueous potassium carbonate solution is made by dissolving 6.29 moles of K₂CO₃ in sufficient water so that the final volume of the solution is 4.20L. The molarity of a solution is 1.50M.

Molarity is defined as the moles of solute present in the specific amount or volume of a solution. We calculate the moles of a substance using the formula

moles=(mass/molar mass)

If the volume of a solution is given in ml, then convert it into L.

Molarity is calculated as

Molarity=moles/volume(in L)

Given that moles=6.29, and volume=4.20L

Plug both values in the formula

Molarity=(6.29 mol/4.20 L)

Molarity=1.4976 mol/L

Molarity=1.50 M (∵M=mol/L)

Therefore, the molarity of a K₂CO₃ solution is 1.50M.

To know more about molarity

https://brainly.com/question/29350560

#SPJ4

The atmosphere Moves to alternative technologies that use less or less gas.

We can't stop global warming overnight but we can slow and limit global warming by reducing human emissions of heat-trapping gases and soot. Emissions can be reduced by switching to alternative technologies that use less or no gas.

Using public transport carpooling biking and walking reduces the number of cars on the road and greenhouse gases in the atmosphere. Carbon dioxide is removed from the atmosphere by passing the air through large air filters and is stored deep underground. This technology already exists and is being used on a small scale.

Learn more about The atmosphere here:-https://brainly.com/question/24925283

#SPJ4

Transcription begins with the opening and unwinding of a little portion of the DNA double helix to expose the nucleotides on each DNA strand.

The act of transcription involves transferring information from a strand of DNA to a fresh messenger RNA molecule (mRNA) . DNA safely and permanently stores genetic material in the cell nuclei as a reference or template.

The single-stranded DNA is exposed and prepared for transcription once RNA polymerase and its associated transcription factors are present. RNA polymerase now starts to move down the DNA template strand in a 3' to 5' orientation, stringing together complimentary nucleotides as it goes.

To know more about RNA visit:-

https://brainly.com/question/16093015

#SPJ4

Acidic and Basic substances are frequently found in chemistry and daily life. Acidic and Basic are essential components of our daily lives. They perform a useful function both inside and outside of our bodies.

Typically, sour tastes help to identify acidic chemicals. A fundamental definition of an acid is a molecule that can donate an H+ ion and maintain its energetic favorability even after losing an H+ ion.

Lewis acids, which include all Lowery Bronstead acids, also include many additional reagents like boron trifluoride, aluminum chloride, etc.

To know more about Substances visit:-

brainly.com/question/20595402

#SPJ4

Capitalism was denounced by Marx as a system who alienates the masses. Although employees generate goods for such market, market forces—not workers—control things, according to his justification.

Many people imagine capitalism as an economic system where private individuals own control property based on their own interests and where supply and demand freely set market prices in a way that best meets societal demands. Capitalism's major motivator is the pursuit of profit.

When compared to socialism, which is based on government planning and restrictions on private resource management, capitalism is built on individual initiative and promotes market mechanisms before government involvement. Economies sometimes incorporate components of both systems when left to their own devices.

To know more about capitalism visit:

https://brainly.com/question/7672602

#SPJ4

Drying clothes is a physical change since only the state of water changes from liquid to vapor, with no changes in chemical makeup or formation of new products.

Physical changes refer to modifications made to a substance's physical characteristics. In most cases, a physical change is reversible. No new substance is created during such a change.

Learn more about Physical change here:

https://brainly.com/question/960225

#SPJ4

The offered statement states that when a brass plate is submerged in a copper sulfate aqueous solution, Cu2+(aq)+2e-Cu (s).

Especially when used for a brief time, it may be safe when consumed in greater sums. However, eating amounts greater than 40 mg per day may reduce the amount of copper that the body absorbs. Exceptionally high zinc doses are actually very dangerous and may result in nausea, vomiting, and other unpleasant side effects.

Although used alone or in conjunction with vitamin C, zinc is frequently included within multivitamins. Although it can upset the stomach, its digestion is most effective when done so on an empty stomach.

To know more about Zinc visit:

https://brainly.com/question/13890062

#SPJ4

The change in gravitational potential energy can be calculated by the formula   U = m × g × h .

Gravity (g) is the acceleration that affects all object on earth. The acceleration is 9.8m/s2, downwards. Gravitational potential energy is the potential for an object to return to the surface of the earth. For gravitational potential energy, the higher up an object moves the more gravitational potential energy it has. this is the energy stored in height. Like kinetic energy, potential energy is measured in Joules.

                         U = m × g × h

Where U is the gravitational potential energy, m is the mass of the object, h is the height of the object, and g is the acceleration of gravity.

With our formula and understanding of gravitational potential energy, let's practice calculating the change in gravitational potential energy with two example problems solved step by step.

To learn more about Gravitational potential energy please visit:

https://brainly.com/question/3120930

#SPJ4

The first solution contains 0.300 mol of naoh in 1.75 l of solution.Second solution contains 16.5 g of nacl in 783 ml of solution.The molarity of the two solutions are 0.1714 and 0.3601 respectively.

Molarity=[tex]\frac{moles solute}{liter of solution}[/tex]

Molarity of naoh=[tex]\frac{0.300}{1.75}[/tex]=0.1714 m naoh

Molarity of nacl:-

Calculate molar mass of NaCl

Na=23.00amu

Cl=35.45amu

Molar Mass=58.45amu

Moles of nacl=[tex]\frac{16.5g nacl}{58.45g nacl}[/tex]=0.282 mol nacl

molarityof nacl=[tex]\frac{0.282mol nacl}{0.783l}[/tex] =0.3601 m nacl

Molarity is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per liters of a solution. Molarity is also known as the molar concentration of a solution.

Molar mass of a substance is the mass in grams of one mole of the compound. In a substance, the amount of entities present e.g. atoms, molecules, ions, is defined as a mole. A mole of any substance is 6.022×[tex]10^{23}[/tex] molecules.

Know more about molarity visit the link:

https://brainly.com/question/24305514

#SPJ4

The atmospheric partial pressure of oxygen  refers to the amount of oxygen in the atmosphere, which is mainly influenced by the amount of oxygen in the air. The alveolar partial pressure of oxygen (PₐO₂) refers to the amount of oxygen in the air that has diffused into the alveoli in the lungs and is the amount of oxygen available for respiration.

This difference between these two exists because oxygen molecules must travel through the airways and across the alveolar-capillary membrane before they can reach the alveoli in the lungs.

The airways contain airway resistance, which limits the amount of oxygen that can diffuse into the alveoli from the atmosphere. Additionally, there is a gradient of oxygen between the alveoli and the surrounding capillaries, which affects the amount of oxygen that can pass across the alveolar-capillary membrane.

As a result, the amount of oxygen in the alveoli is always lower than the amount of oxygen in the atmosphere. That is why both differ in their own ways.

To know more about respiration quotient, click below:

https://brainly.com/question/13092950

#SPJ4

cis-2-butene is the result of overlapping sp2-type orbitals of the following is false.

According to a general definition, stereoisomers are isomers with the same composition (i.e., the same parts), but different orientations in space. Enantiomers and diastereomers are the two different types of stereoisomers. Like one's hands, enantiomers and diastereomers are mirror images of each other.

When two distinct groups of a molecule are swapped out, stereoisomers of other molecules are produced. a magnetic connection that develops between two particles, such as non-zero spin hydrogen nuclei, when the rates of reaction between two enantiomers differ.

To know more about Stereoisomers visit:

https://brainly.com/question/16986110

#SPJ4

A manometer's measured pressure is that which is more than atmospheric pressure, which at sea level is 14.7 psi, 101.3 kPa, or 76 cmHg .

About 78% of the gases in the Earth's atmosphere are nitrogen, 21% are oxygen, 0.9 % are argon, and 0.1 % are other gases. The remaining 0.1 percent of gases includes trace amounts of neon, water vapor, methane, carbon dioxide, and methane.

101,325 pascals, or newtons of force per square meter, is the equivalent of one standard atmosphere, sometimes referred to as one atmosphere (approximately 14.7 pounds per square inch). also see millibar Related Articles: environment.

calculation:

atmospheric pressure = 760mm of Hg

Manometer at sea level = 101m3kPa

To know more about atmospheric pressure visit:-

https://brainly.com/question/28310375

#SPJ4

The 3 examples of metaphors: 1. life is a dual carriageway. 2. Her eyes were diamonds.3. he is a shining big name.

A metaphor is discernment of speech that, for rhetorical effect, directly refers to 1 thing by bringing up another. it may provide clarity or become aware of hidden similarities between two one-of-a-kind thoughts. A metaphor is a discernment of speech that describes an item or movement in a manner that isn't always actually genuine but helps explain a concept or make an assessment.

See if the sentence makes use of a word inclusive of “as” or “like” as a preposition. that is, it's far from evaluating things explicitly. If it compares matters without the usage of prepositions consisting of “like” or “as” it is a metaphor.

Learn more about metaphor here:

https://brainly.com/question/9418370

#SPJ4