Vertical motion: the height above ground of an object moving vertically is given by S = 16t^2 + 96t + 112 with sin feet and t in second find a. the object's velocity when t = 0; b. its maximum height and when it occurs; c. its velocity when s = 0

The work done by external forces to compress the mole of O₂ gas from 21.8 L to 15.8 L at 5 °C and 1.75 atm is approximately 3.9642 atm*L.

To calculate the work done by external forces to compress the gas, we can use the formula:

Work = -PΔV

Where:

P is the pressure

ΔV is the change in volume

First, we need to calculate the initial and final pressures. The initial pressure is given as 1.75 atm, and it remains constant throughout the process since the temperature is kept constant. So, the initial pressure (P1) is 1.75 atm.

To find the final pressure (P2), we can use the ideal gas law equation:

PV = nRT

Where:

P is the pressure

V is the volume

n is the number of moles

R is the ideal gas constant

T is the temperature

P1 = 1.75 atm

V1 = 21.8 L

V2 = 15.8 L

T = 5 °C = 278 K

Rearranging the ideal gas law equation to solve for P2, we have:

P2 = (P1 * V1) / V2

P2 = (1.75 atm * 21.8 L) / 15.8 L

P2 ≈ 2.4107 atm

Now, we can calculate the change in volume:

ΔV = V2 - V1

ΔV = 15.8 L - 21.8 L

ΔV = -6 L

Plugging these values into the work formula:

Work = -(P2 - P1) * ΔV

Work = -(2.4107 atm - 1.75 atm) * -6 L

Work ≈ 3.9642 atm*L

Therefore, the work done by external forces to compress the gas is approximately 3.9642 atm*L.

To know more about work done refer here:

https://brainly.com/question/32281584#

#SPJ11

a) The trajectory of the comet an ellipse with one of the focal points placed very close to the position of the star: True

b) The amount of time for the comet to go around the star directly proportional to the cube of the length of the semi-major axis of the orbit: False

c) The angular momentum of the comet about the star constant: True

d) The linear momentum of the comet constant: False

a) True. The trajectory of the comet is indeed an ellipse with one of the focal points placed very close to the position of the star. This is one of the fundamental properties of an elliptical orbit.

b) False. The amount of time for the comet to go around the star is not directly proportional to the cube of the semi-major axis of the orbit.

Instead, it is directly proportional to the 3/2 power of the semi-major axis. This relationship is described by Kepler's third law of planetary motion.

c) True. The angular momentum of the comet about the star is constant. According to the law of conservation of angular momentum, in the absence of external torques, the angular momentum of a system remains constant.

Since there are no external torques acting on the comet-star system, its angular momentum remains constant.

d) False. The linear momentum of the comet is not constant. In an elliptical orbit, the speed of the comet changes as it moves closer to or farther away from the star.

Therefore, the linear momentum, which is the product of mass and velocity, is not constant.

To know more about "Angular momentum" refer here:

https://brainly.com/question/17272991#

#SPJ11

The rotational inertia of the object can be calculated using the slope of the graph.

Rotational inertia is defined as the resistance offered by a body to change its rotational motion about its axis. It is represented by I. The rotational inertia of a solid cylinder rolling without slipping is calculated using the formula: I = (1/2) MR² Where, I = rotational inertia M = mass of the cylinder R = radius of the cylinder.

We are given that the object is rolling smoothly, which means there is no slipping involved. The graph shows the speed v versus time t for the object, and the slope of this graph gives us the acceleration a of the object. Since the object is rolling smoothly, its acceleration is given by: a = gsinθ/(1 + (k² / R²)) where θ = angle of inclination of the ramp k = radius of gyration of the object R = radius of the object g = acceleration due to gravity.

Plugging in the given values, we can find the acceleration. Then using the formula for rotational inertia of a solid cylinder rolling without slipping, we can calculate the rotational inertia of the object.

Learn more about rotational inertia here:

https://brainly.com/question/27178400

#SPJ11

If  you throw a ball against the ceiling—so the ball moves upward and then rebounds to move downward, at the instant the ball hits the ceiling, the acceleration is d. Negative.

When the ball hits the ceiling, it experiences a sudden change in its motion. Before hitting the ceiling, the ball is moving upward with a positive velocity and experiencing a positive acceleration due to the force of gravity pulling it down. However, upon hitting the ceiling, the direction of motion changes, and the ball starts moving downward. As a result, its velocity becomes negative, and the acceleration also becomes negative to oppose the motion and slow down the ball's upward velocity. Therefore, the acceleration at the instant the ball hits the ceiling is negative.

To know more about, change in its motion, click here https://brainly.com/question/30168162

#SPJ11

The relativistic kinetic energy of the proton is 1.89 × 10⁻ⁱ⁴ J.The ratio of relativistic and non-relativistic kinetic energy is 1.04.

Given, mass of the proton, m = 1.67 × 10⁻²⁷ kg

Speed, v = 9.00 × 10⁷ m/sa)

Non-relativistic kinetic energy formula: K = (1/2) m v²

Substitute the values in the above formula to get the non-relativistic kinetic energy of the proton.

K = (1/2) m v²= (1/2) × 1.67 × 10⁻²⁷ × (9.00 × 10⁷)²= 6.76 × 10⁻¹¹ Jb)

Relativistic kinetic energy formula: K = mc² (γ - 1)where γ = 1 / √(1 - v² / c²) is the Lorentz factor.

c is the speed of light, c = 3 × 10⁸ m/s

Substitute the given values in the above formula to get the relativistic kinetic energy of the proton.

K = mc² (γ - 1)= 1.67 × 10⁻²⁷ × (3 × 10⁸)² × [(1 / √(1 - (9.00 × 10⁷)² / (3 × 10⁸)²)) - 1]= 1.89 × 10⁻ⁱ⁴ Jc)

Ratio of the two results:Krel/Knormal= K/Knormal= (mc² (γ - 1)) / (1/2) m v²= 2 × (γ - 1) / v²= 2 × [(1 / √(1 - v² / c²)) - 1] / v²Substitute the given values in the above equation to get the ratio.

Krel/Knormal= K/Knormal= [(2 × [(1 / √(1 - (9.00 × 10⁷)² / (3 × 10⁸)²)) - 1]) / (9.00 × 10⁷)²] / [6.76 × 10⁻¹¹]= 1.04

Approximately, Krel/Knormal = 1.04

The non-relativistic kinetic energy of the proton is 6.76 × 10⁻¹¹ J.

The relativistic kinetic energy of the proton is 1.89 × 10⁻ⁱ⁴ J.The ratio of relativistic and non-relativistic kinetic energy is 1.04.

Learn more about relativistic kinetic energy

brainly.com/question/28204404

#SPJ11

AC is at a minimum at Q = 300.

To find the optimized value of Q, we have to find the derivative of AC with respect to Q and equate it to zero.So, differentiate the AC equation with respect to

Q.d(AC)/d(Q) = -36000/Q² + 0.4= 0

Thus, -36000/Q² + 0.4 = 0

Solving the above equation for Q, we get

Q² = 36000/0.4Q² = 90000Q = 300 (∵ Q must be positive)

Therefore, the value of Q at which AC is optimized is Q = 300.

Now, we need to check whether it is a minimum or a maximum.

To do that, we need to find the second derivative of AC with respect to

Q.d²(AC)/d(Q²) = 72000/Q³

Thus, d²(AC)/d(Q²) > 0 (∵ Q is positive)

Therefore, AC is at a minimum at Q = 300.

learn more about Calculus here

https://brainly.com/question/29499469

#SPJ11

The force exerted by the airbag on the dummy is -15,000 Newtons.According to Newton's second law of motion, force (F) is equal to mass  multiplied by acceleration.

In this scenario, the dummy has a mass of 60.0 kg and experiences an acceleration of -250 [tex]m/s^2[/tex]. Using the formula F = ma, we can calculate the force exerted by the airbag.

Identify the given values:

Mass of the dummy (m) = 60.0 kg

Acceleration of the dummy (a) = -250 [tex]m/s^2[/tex]

Apply the formula F = ma:

Force (F) = 60.0 kg * (-250 [tex]m/s^2[/tex])

Force (F) = -15,000 Newtons

In this scenario, we are given a crash situation where a dummy with a mass of 60.0 kg hits an airbag. We need to determine the force exerted by the airbag on the dummy. To solve this, we can use Newton's second law of motion, which states that force (F) is equal to mass (m) multiplied by acceleration (a), expressed as F = ma.

First, we identify the given values. The mass of the dummy is provided as 60.0 kg, and the acceleration experienced by the dummy is -250 [tex]m/s^2[/tex]. The negative sign indicates that the acceleration is in the opposite direction to the positive direction of the coordinate system, implying a deceleration or slowing down of the dummy.

Next, we substitute the values into the formula and calculate the force. Multiplying the mass (60.0 kg) by the acceleration (-250 [tex]m/s^2[/tex]), we find that the force exerted by the airbag on the dummy is -15,000 Newtons. The negative sign indicates that the force is directed opposite to the motion of the dummy, acting as a restraining force to slow it down and protect it during the crash.

To summarize, the airbag exerts a force of -15,000 Newtons on the dummy during the crash. This force is essential in reducing the acceleration of the dummy and providing a cushioning effect, minimizing the potential for injuries.

Learn more about Force

brainly.com/question/30507236

#SPJ11

The closest object that can be photographed is 81.63mm and the magnification of this closest object is -0.404.

The focal length of a lens is determined when the lens is focused at infinity. It is obtained from the reciprocal of objects' distance and image distance. Magnification is the enlarged image that is formed over the object size.

From the given,

focal length (f) = 23.5mm

object's distance (u) = 33mm

imagen distance(v) =?

Focal length, (1/f) = 1/u + 1/v

1/v = 1/f - 1/u

    =1/23.5 - 1/33

1/v  = 12.2mm

v = 1/12.2 mm

  = 81.96mm

Thud, the image distance is v= 81.96mm.

Magnification (M) = -v/u

M = -33 / 81.96

  = - 0.402.

Thus, the magnification is -0.402.

To learn more about Focal length:

https://brainly.com/question/30585050

#SPJ4

(a) Magnitude of the velocity of ship A relative to B= 8 knots(b) Direction of the velocity of ship A relative to B= 298.43 degrees(c) The ships will be 160 nautical miles apart after 5 hours(d) The bearing of B relative to A= 230.25 degrees

Given data,Velocity of ship A = 24 knotsVelocity of ship B = 28 knotsAngle at which ship B is moving= 40 degrees west of south(a) To find magnitude of velocity of ship A relative to B. We will use the relative velocity formula : v^2 = v1^2 + v2^2 - 2v1v2cosθWhere v = relative velocity, v1 = velocity of ship A, v2 = velocity of ship Bθ = angle between the directions of both ships.So, we getv^2 = 24^2 + 28^2 - 2 x 24 x 28 x cos(50)v = 8 knots.Now we will put the value of d as 160 in the above equation, and solve for t.t= 5 hours. On solving, we get : θ = 230.25 degreesTherefore, the bearing of B relative to A= 230.25 degreesAnswer:  (a) Magnitude of the velocity of ship A relative to B= 8 knots(b) Direction of the velocity of ship A relative to B= 298.43 degrees(c) The ships will be 160 nautical miles apart after 5 hours(d) The bearing of B relative to A= 230.25 degrees

The given data is,Velocity of ship A = 24 knotsVelocity of ship B = 28 knotsAngle at which ship B is moving= 40 degrees west of south(a) To find magnitude of velocity of ship A relative to B. We will use the relative velocity formula : v^2 = v1^2 + v2^2 - 2v1v2cosθWhere v = relative velocity, v1 = velocity of ship A, v2 = velocity of ship Bθ = angle between the directions of both ships. => θ = 50 degreesSo, we getv^2 = 24^2 + 28^2 - 2 x 24 x 28 x cos(50)v = 8 knotsHence, magnitude of the velocity of ship A relative to B= 8 knots(b) To find direction of velocity of ship A relative to B. We will use the same formula as above:v = √(v1^2 + v2^2 - 2v1v2cosθ)θ = cos^-1[(v1^2 + v2^2 - v^2)/ 2v1v2]θ = cos^-1[(24^2 + 28^2 - 8^2)/ 2 x 24 x 28]θ = 298.43 degreesTherefore, direction of the velocity of ship A relative to B= 298.43 degrees(c) To find after what time will the ships be 160 nautical miles apartWe will use the formula for distance = speed x timeLet time be t. Distance between both the ships after time t, d = √[24tcos45 - (28sin50)t]^2 + [24tsin45 - (28cos50)t]^2d = √[12√2 t - 19.32t]^2 + [12√2t]^2On solving, we get :d = 12t√(33-38cos50)Now we will put the value of d as 160 in the above equation, and solve for t.t= 5 hoursTherefore, after 5 hours the ships will be 160 nautical miles apart.(d) To find bearing of B (the direction of Bs position) relative to A at that time:We will use the formula : tanθ = (sinΔλ) / (cosφ1tanφ2 - sinφ1cosΔλ)Where,φ1 = latitude of A, φ2 = latitude of B,Δλ = difference in longitude of both the ships (40 degrees)On solving, we get : θ = 230.25 degreesTherefore, the bearing of B relative to A= 230.25 degrees.

To know more about velocity visit :-

https://brainly.com/question/30559316

#SPJ11

The amount of heat the jeweler must add to 0.500 kg of silver depends on the initial temperature (T) of the silver.

To calculate the amount of heat the jeweler must add to 0.500 kg of silver in order to raise its temperature to the melting point, we need to use the formula:

Q = mcΔT,

where Q is the heat energy, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

Mass of silver (m): 0.500 kg

Specific heat capacity of silver (c): 0.235 J/g°C (converted to J/kg°C)

Change in temperature (ΔT): The difference between the current temperature of the silver and its melting point.

To raise the temperature of the silver from its current temperature to its melting point, we need to calculate the temperature difference. Let's assume the current temperature is T°C.

ΔT = 960.8°C - T°C

Now we can substitute the values into the formula:

Q = (0.500 kg) * (0.235 J/kg°C) * (960.8°C - T°C)

Therefore, the amount of heat the jeweler must add to 0.500 kg of silver depends on the initial temperature (T) of the silver.

To know more about heat visit:

https://brainly.com/question/27991746

#SPJ11

When measuring the coupling constant between he and hf, it can help determine the stereochemistry of the double bond. The coupling constant is the distance between the two peaks in the NMR spectrum. The value of the coupling constant depends on the distance between the two nuclei and the angle between the two bonds connecting the nuclei.

In a cis double bond, the hydrogens (H) are on the same side of the molecule, while in a trans double bond, the hydrogens (H) are on opposite sides of the molecule. When he and hf are in cis double bond, their coupling constant will be larger because the angle between the two bonds connecting the nuclei will be small.In contrast, when he and hf are in a trans double bond, their coupling constant will be smaller because the angle between the two bonds connecting the nuclei will be larger.

The stereochemistry of the double bond can, therefore, be determined based on the value of the coupling constant. In general, if the coupling constant is greater than 10 Hz, it indicates a cis double bond, while if the coupling constant is less than 10 Hz, it indicates a trans double bond.

To know more about stereochemistry visit:

https://brainly.com/question/13266152

#SPJ11

If two m=4.6 g point charges on 1.0-m-long threads repel each other after being charged to q=110 ,the angle between the two point charges would be approximately 54 degrees.

When two point charges repel each other, the force of repulsion acts along the line connecting the charges. In the given scenario, the charges are suspended on 1.0-m-long threads, which implies that the threads are in tension and make a small angle with the vertical.
To find the angle, we can consider the triangle formed by the vertical, the threads, and the line connecting the charges. Since the angle is small, we can approximate the tangent of the angle as the ratio of the vertical displacement (1.0 m) to the horizontal displacement (the distance between the charges).
Using trigonometry, we can calculate the angle as arctan(1.0 m / (0.11 m + 0.11 m)) ≈ 54 degrees.

To know more about ,force of repulsion, click here https://brainly.com/question/30656894

#SPJ11

The amount of radiation absorbed by the planet, given an albedo of 0.2 and incoming solar radiation of 301 Wm², is approximately 240 Wm².

When solar radiation reaches a planet, a portion of it is reflected back into space, which is determined by the planet's albedo. In this case, the albedo is given as 0.2, meaning that 20% of the incoming radiation is reflected.

To calculate the amount of radiation absorbed, we subtract the reflected radiation from the total incoming radiation.

In this scenario, the incoming solar radiation is 301 Wm². Since the albedo is 0.2, 20% of the radiation is reflected, which is 0.2 * 301 = 60.2 Wm².

To find the absorbed radiation, we subtract the reflected radiation from the total incoming radiation: 301 - 60.2 = 240.8 Wm².

Rounding to the nearest whole number, we get 240 Wm² as the amount of radiation absorbed by the planet.

Learn more about amount of radiation

brainly.com/question/31590119

#SPJ11

The amount of work required to stop the car is 865,152 J. This work can be done by applying a force over a certain distance, such as by using the brakes or by colliding with another object that can absorb the car's kinetic energy.

To stop a 1200 kg car traveling at 95 km/h, it is necessary to perform work that converts the car's kinetic energy into other forms of energy.

Kinetic energy is the energy that an object possesses as a result of its motion, and is calculated as 1/2 mv^2, where m is the mass of the object and v is its velocity.

To stop the car completely, all of its kinetic energy must be converted into other forms of energy, such as heat, sound, or work done against frictional forces.

The amount of work required to do this is equal to the car's initial kinetic energy, which can be calculated as (1/2)mv^2.In this case, the mass of the car is 1200 kg and its velocity is 95 km/h.

To calculate its kinetic energy, we must first convert the velocity from km/h to m/s:95 km/h = (95/3.6) m/s = 26.4 m/sThen, the kinetic energy of the car can be calculated as:(1/2)(1200 kg)(26.4 m/s)^2= 865,152 J

The actual amount of work required may be greater than this, depending on factors such as the efficiency of the braking system and the amount of frictional forces involved.

To know more about work refer here:

https://brainly.com/question/19382352#

#SPJ11

Refrigerator magnets, horseshoe magnets, and disk magnets all exhibit the magnetic field of a dipole, just like a bar magnet.

Refrigerator magnets are typically small, flat magnets often attached to decorative items or advertising materials. While their shape may vary, they still possess two poles (north and south) and generate a magnetic field similar to that of a dipole.

Horseshoe magnets have a distinct U-shape and are named after their resemblance to the shape of a horseshoe. They are designed specifically to maximize the strength of the magnetic field between the poles. The magnetic field pattern produced by a horseshoe magnet is that of a dipole.

Disk magnets, also known as round magnets or cylinder magnets, have a circular or cylindrical shape. Although they differ in shape from a traditional bar magnet, they still possess two poles and exhibit a dipole magnetic field.

In summary, refrigerator magnets, horseshoe magnets, and disk magnets all demonstrate the magnetic field characteristics of a dipole, with distinct north and south poles.

To know more about Horseshoe magnets, click here:

https://brainly.com/question/32683137

#SPJ11

The average annual rate of inflation during this 10-year period would be approximately 7%.

The Rule of 70 states that the approximate doubling time can be calculated by dividing 70 by the annual growth rate. In this case, since the CPI doubled over a 10-year period, we can use the Rule of 70 to find the average annual rate of inflation.

Let's denote the average annual rate of inflation as r.

According to the Rule of 70:

70 / r = 10

Simplifying the equation, we have:

7 = r

Therefore, the average annual rate of inflation during this 10-year period would be approximately 7%.

To know more about average annual rate of inflation, click here:

https://brainly.com/question/31310927

#SPJ11

To calculate the width of the central maximum on a screen behind the slit, we can use the formula: W = (λ * L) / d

W is the width of the central maximum

λ is the wavelength of light

L is the distance between the slit and the screen

d is the diameter of the hole

λ = 500 nm = 500 × 10^(-9) m

L = 1.6 m

d = 0.50 mm = 0.50 × 10^(-3) m Substituting these values into the formula: W = (500 × 10^(-9) m * 1.6 m) / (0.50 × 10^(-3) m) W = 1.6 × 10^(-6) m To convert the width to millimeters: W = 1.6 × 10^(-6) m * 1000 mm/m. W = 1.6 × 10^(-3) mm. Therefore, the width of the central maximum on the screen is 1.6 × 10^(-3) mm.

To learn more about slit, https://brainly.com/question/32129557

#SPJ11

The internal resistance of the automobile battery is 0.3012 Ω.

The internal resistance of an automobile battery that has an emf of 12.0 V and a terminal voltage of 14.5 V while a current of 8.30 A is charging can be calculated using the formula,

`V = E - Ir` where `V` is the terminal voltage, `E` is the emf, `I` is the current and `r` is the internal resistance.

So, we can write the formula as

`r = (E - V)/I`.

Substituting the given values, we get,

r = (12.0 - 14.5)/8.30r = -2.5/8.30r = -0.3012 Ω.

Since resistance cannot be negative, we can take the magnitude of it. Hence, the internal resistance of the automobile battery is 0.3012 Ω. In physics, resistance is the ability of a material to oppose the flow of electrical current. It is represented by the symbol R and is measured in ohms (Ω). Resistance is dependent on various factors such as the material of the conductor, its length, its cross-sectional area, and temperature. When a voltage is applied across a conductor, an electrical current flows through it. However, some of the electrical energy is dissipated in overcoming the resistance of the conductor, which generates heat. Therefore, resistance leads to the loss of electrical energy.

To know more about internal resistance visit:

https://brainly.com/question/30464619

#SPJ11

When a magnet is plunged into a coil at speed v, a voltage is induced in the coil and a current flows in the circuit due to Faraday's Law of Electromagnetic Induction. The direction of the current can be determined using Lenz's Law.

When a magnet is plunged into a coil at speed v, it induces a voltage in the coil and a current flows in the circuit. This is because the changing magnetic field around the coil induces an electromotive force, which causes a current to flow through the wire.

According to Faraday's Law of Electromagnetic Induction, the induced EMF is proportional to the rate of change of the magnetic field. In this case, the magnetic field changes as the magnet moves closer to and farther from the coil at a constant speed v. As a result, the induced EMF is also constant, and the current flowing through the circuit is also constant.The direction of the current can be determined by using Lenz's Law, which states that the induced current will always flow in a direction that opposes the change in magnetic flux that produced it.

In conclusion, when a magnet is plunged into a coil at speed v, a voltage is induced in the coil and a current flows in the circuit due to Faraday's Law of Electromagnetic Induction. The direction of the current can be determined using Lenz's Law.

To know more about Faraday's Law visit:

brainly.com/question/1640558

#SPJ11

When two metals are placed in contact with one another, a galvanic cell is formed. The type of reaction that takes place depends on the metal and the conditions under which they are in contact. The more reactive metal will undergo oxidation while the less reactive metal will undergo reduction.

When two metals are placed in contact with one another, a galvanic cell is formed. The type of reaction that takes place depends on the metal and the conditions under which they are in contact. The more reactive metal will undergo oxidation while the less reactive metal will undergo reduction.The reaction between two metals creates a voltage potential between them. If the potential is high enough, it can cause an electrochemical reaction to take place between the two metals. The flow of electrons through the wire can be harnessed to do work such as powering an electrical device. This phenomenon is the basis for batteries and electrochemical cells.

To conclude, when two metals are placed in contact with one another, a galvanic cell is formed. The type of reaction that takes place depends on the metal and the conditions under which they are in contact. The more reactive metal will undergo oxidation while the less reactive metal will undergo reduction.

To know more about galvanic cell visit:

brainly.com/question/29784730

#SPJ11

To determine the earliest time after t = 0 s at which there is a crest at the position x = 3.6 cm, we need to consider the wave equation for a crest.

The wave equation for a crest is given by:
x = A * cos(2πf(t - T/4))
Where:
x is the position of the wave
A is the amplitude of the wave
f is the frequency of the wave
t is the time
T is the period of the wave
In this case, we are given x = 3.6 cm, and we need to find the earliest time when this position occurs.
To find the earliest time, we can rewrite the wave equation as:
cos(2πf(t - T/4)) = x/A
Taking the inverse cosine of both sides:
2πf(t - T/4) = arccos(x/A)
Simplifying:
t - T/4 = arccos(x/A) / (2πf)
Now, we can solve for t by rearranging the equation:
t = (arccos(x/A) / (2πf)) + T/4
Since we are interested in the earliest time after t = 0 s, we need to find the smallest positive value of t that satisfies the equation.
Plug in the given values:
x = 3.6 cm
A (amplitude) - not given
f (frequency) - not given
T (period) - not given
Without knowing the values for A, f, and T, we cannot calculate the earliest time. We would need additional information about the wave or the specific conditions to determine the values of these variables and calculate the earliest time for a crest at x = 3.6 cm.

To know more about , wave equation , click here https://brainly.com/question/4692600

#SPJ11

Given Data:

Helium is pumped into a spherical balloon at a rate of 5 cubic feet per second.

Volume of a sphere is given by V= (4/3) π r³

To Find: Rate of change of radius (in feet per second)

Formula used: V= (4/3) π r³Differentiating V w.r.t t, we get d V/dt = 4πr² . dr/dt

Solution: Given that helium is pumped into a spherical balloon at a rate of 5 cubic feet per second and it is required to find the rate of change of radius (in feet per second) after 3 minutes.

Let’s first convert the given time into seconds;

3 minutes = 3 × 60 seconds = 180 seconds.

Volume of the spherical balloon (V) pumped with helium = Rate of helium pumped into the balloon = 5 cubic feet per second

As per the formula of the volume of a sphere,V = (4/3) π r³ ⇒ r³ = (3/4π) V Differentiating with respect to time t, we get,3r² . d r/d t = (3/4π) d V/d t Multiplying both sides by (4/3π), we get, dr/dt = (4/3π) (d V/d t) / 3r²

Given that d V/d t = 5, we get, d r/d t = (4/3π) (5) / 3r²

We are given that we need to find the value of the rate of change of the radius after 3 minutes i.e t = 180 seconds. Putting the value of t in the above equation, we get, /d t = (4/3π) (5) / 3r²dr/d t = (20/9πr²) feet/second

Now, we need to find the value of r;

as per the formula of volume, V = (4/3) π r³V = (4/3) π (2)³ ⇒ 33.51 cubic feet Therefore, r = (3V/4π)^(1/3) = (3×33.51/4π)^(1/3) = 2 feet (approx.) Putting the value of r in the above equation,

we get, d r/d t = (20/9π(2)²) feet/second d r/d t = (5/18π) feet/second

Therefore, the rate of change of the radius of the balloon after 3 minutes is (5/18π) feet/second.

To know more about V= (4/3) π r³ visit

https://brainly.com/question/22135719

#SPJ11

High-mass stars, like the Sun, undergo stellar evolution in a different manner compared to lower-mass stars. Here are the primary differences in the stages of stellar evolution between a high-mass star and a star like the Sun:

Sun-like Star:

Nebula: A cloud of gas and dust collapses under its gravity, forming a protostar.

Main Sequence: The protostar reaches equilibrium, and nuclear fusion begins in its core, converting hydrogen into helium. This phase lasts for about 10 billion years.

Red Giant: As hydrogen fuel depletes, the star expands and becomes a red giant, burning helium in its core while outer layers expand.

Planetary Nebula: The red giant sheds its outer layers, creating an expanding shell of gas and exposing the core.

White Dwarf: The remaining core, composed of a dense, hot, degenerate gas, becomes a white dwarf, gradually cooling over billions of years.

High-Mass Star:

Nebula: Similar to the Sun-like star, a nebula collapses to form a protostar.

Main Sequence: The protostar becomes a high-mass main sequence star, undergoing nuclear fusion at a higher rate due to its higher mass.

Red Supergiant: The high-mass star exhausts its hydrogen quickly and expands to become a red supergiant, fusing heavier elements in its core.

Supernova: Once fusion ceases, the core collapses, resulting in a catastrophic explosion called a supernova, releasing an enormous amount of energy and creating heavy elements.

Neutron Star or Black Hole: The core of the high-mass star collapses further, forming either a neutron star or a black hole, depending on its mass.

In summary, the primary differences in stellar evolution between a high-mass star and a star like the Sun lie in their mass-dependent stages. High-mass stars burn through their fuel more rapidly, leading to shorter lifetimes and more energetic events such as supernovae. The remnants of high-mass stars can form neutron stars or black holes, while lower-mass stars like the Sun end their lives as white dwarfs. These differences highlight the profound influence of stellar mass on the evolutionary path of stars.

To know more about mass ,visit:

https://brainly.com/question/86444

#SPJ11

When a force of 20 N is applied to the edge of a wheel that has a radius of 20 cm, it starts rotating. The angular acceleration of the wheel is 0.75 rad/s².Let's see what this means. When a force is applied to an object, it will move, but the movement may not be in the same direction as the force.

If the force is applied at an angle to the object's center of mass, the object will rotate instead of moving in a straight line.The rate at which the rotation occurs is referred to as angular velocity, and it is denoted by the Greek letter omega (ω). Angular acceleration is the rate at which an object's angular velocity changes over time. It is denoted by the Greek letter alpha (α).Using the formula, we can figure out the wheel's angular velocity and how long it takes to reach that velocity. Here's how to go about it:τ = Iα where τ is the torque, I is the moment of inertia, and α is the angular acceleration.We can rearrange this formula to find angular acceleration:

α = τ / I

where α is the angular acceleration, τ is the torque, and I is the moment of inertia.The moment of inertia of a disc (wheel) is ½ MR², where M is the mass and R is the radius. We can determine the torque by multiplying the force by the radius of the wheel, which is 20 cm or 0.2 meters:

τ = F × r

= 20 × 0.2

= 4 NmThe moment of inertia of the wheel is:

I = ½ MR²

= ½ (M × 0.2²)

= 0.02MUsing these values, we can now find the angular acceleration:α = τ / I = 4 / 0.02M

= 200 / M rad/s²If the angular acceleration of the wheel is 0.75 rad/s², we can use this formula to figure out how long it will take to reach that acceleration.t = ω / αwhere t is time and ω is angular velocity.The wheel starts from rest, so its initial angular velocity is zero. Using this formula, we can solve for the time

t = ω / α

= 0.75 / 0.2

= 3.75 seconds.It will take 3.75 seconds for the wheel to reach an angular acceleration of 0.75 rad/s².

For more information on  angular acceleration visit:

brainly.com/question/30237820

#SPJ11

When an object is moved closer to a plane mirror, its image appears larger but is still the same distance behind the mirror.

A plane mirror produces a virtual image, meaning that the light rays from the object don't actually come together at the location where the image appears to be. When an object is moved closer to a plane mirror, the image appears larger because the angle of incidence and the angle of reflection increase, creating a larger virtual image.

However, the image is still the same distance behind the mirror as it was when the object was farther away, because the distance between the object and the image is twice the distance between the object and the mirror. This is known as the law of reflection and is true for all objects placed in front of a plane mirror, regardless of their distance from the mirror.

Learn more about plane mirror here:

https://brainly.com/question/1160148

#SPJ11

The distance between Earth and the Sun, 1.0 AU, is approximately 93.0 million miles.

To convert 1.0 AU to miles, we need to use the given conversion factors. we convert AU to kilometers by multiplying it by 1.5 × 10⁸ km (as 1 AU is equal to 1.5 × 10⁸ km).

we convert kilometers to miles by dividing by 1.609 km/mi (as 1 mile is equal to 1.609 km).

Calculating the distance in miles:

1.0 AU × (1.5 × 10⁸ km / 1 AU) × (1 mi / 1.609 km) = 93.0 million miles.

Therefore, the distance between Earth and the Sun, 1.0 AU, is approximately 93.0 million miles.

To know more about distance, refer here:

https://brainly.com/question/30145106#

#SPJ11

The maximum potential energy of the mass-spring system is 7.5 Joules. To find the maximum potential energy of the mass-spring system, we can use the formula for potential energy in a spring:

Potential energy (PE) = (1/2) * k * x^2

Where:

PE is the potential energy,

k is the spring constant, and

x is the displacement from the equilibrium position (amplitude in this case).

Mass (m) = 2.5 kg

Spring constant (k) = 60 N/m

Amplitude (A) = 0.5 m

First, we need to find the displacement from the equilibrium position. In simple harmonic motion, the displacement at any point in time can be given by:

x = A * sin(ωt)

Where:

x is the displacement,

A is the amplitude,

ω is the angular frequency (ω = √(k/m)), and

t is the time.

Let's calculate the angular frequency:

ω = √(k/m)

= √(60 N/m / 2.5 kg)

≈ √24 rad/s

≈ 4.899 rad/s

Now, let's find the maximum potential energy:

PE = (1/2) * k * x^2

= (1/2) * 60 N/m * (0.5 m)^2

= (1/2) * 60 N/m * 0.25 m^2

= 7.5 J

Therefore, the maximum potential energy of the mass-spring system is 7.5 Joules.

To know more about Potential Energy, visit

brainly.com/question/21175118

#SPJ11

An energy change can have different effects on the identity of a substance depending on the type of energy involved and the nature of the substance itself. In general, an energy change does not alter the fundamental identity or chemical composition of a substance. The identity of a substance is determined by its unique arrangement of atoms and the types of chemical bonds present.

When considering changes in energy, it is important to distinguish between physical and chemical changes. In a physical change, the substance undergoes a transformation that does not alter its chemical composition. For example, heating water to its boiling point causes a physical change from liquid to gas, but the water molecules remain intact. In this case, the energy change (heat) affects the physical state of the substance but not its identity.

On the other hand, in a chemical change, the substance undergoes a transformation that involves the breaking and forming of chemical bonds, resulting in a different chemical composition. Energy changes, such as heat or light, can drive chemical reactions by providing the necessary activation energy. However, even in a chemical change, the identity of the substance is determined by the arrangement of its atoms and the types of elements involved.

In summary, an energy change, whether in the form of heat, light, or other forms, can affect the physical or chemical properties of a substance, but it does not alter its fundamental identity. The identity of a substance is determined by its unique composition and arrangement of atoms, which remain unchanged during most energy changes.

For more such information on: energy

https://brainly.com/question/13881533

#SPJ8

Dan is looking forward to the next chapter of his life, knowing that he has the skills, knowledge, and support to continue achieving his goals and making a positive impact in the world.

Dan is 50 years old and is beginning to look back at the successes he has had in his life so far. He has had a successful career as a lawyer and has been married to his wife for 25 years. They have two children who have both graduated from college and are doing well in their respective careers. Dan feels grateful for all that he has accomplished in his life and is proud of his family's achievements. He knows that he has been fortunate to have had many opportunities throughout his life, but he also knows that he has worked hard to get where he is today. As he looks back on his life, he realizes that success means different things to different people. For him, success is not just about financial wealth or professional accomplishments. It is about living a meaningful and fulfilling life, surrounded by people he loves and who love him in return.

to know more about positive impact visit:

https://brainly.com/question/28147319

#SPJ11

The given statement The secondary coil of an ideal transformer has 450 turns, and the primary coil has 75 turns. This type of transformer is a step down transformer is false.

In a transformer, the turns ratio between the primary and secondary coils determines whether it is a step-up or step-down transformer. The turns ratio is calculated by dividing the number of turns in the secondary coil by the number of turns in the primary coil.

Given that the secondary coil has 450 turns (N₂) and the primary coil has 75 turns (N₁), we can calculate the turns ratio as:

Turns ratio = N₂ / N₁ = 450 / 75 = 6

If the turns ratio is greater than 1, it indicates a step-up transformer, where the voltage is increased from the primary to the secondary coil. Conversely, if the turns ratio is less than 1, it indicates a step-down transformer, where the voltage is decreased from the primary to the secondary coil.

In this case, the turns ratio is 6, which means the secondary voltage will be higher than the primary voltage. Therefore, the given transformer is a step-up transformer, and the statement "This type of transformer is a step down transformer" is false.

learn more about Transformer here:

https://brainly.com/question/29355231

#SPJ11