waves on a swimming pool propagate at 0.443 m/s. you splash the water at one end of the pool and observe the wave go to the opposite end, reflect, and return in 34.7 s. how far away is the other end?

Answers

Answer 1

The given problem can be solved by applying the formula for wave velocity (V), which is given by, V = λf = λ / T, where V is the velocity of the wave, λ is the wavelength of the wave, f is the frequency of the wave, and T is the time period of the wave.

Given data:Velocity of the wave, V = 0.443 m/sTime taken for the wave to go to the opposite end, reflect, and return = 34.7 sWe need to find the distance between the two ends of the pool. Since the wave reflects from the other end, the wave travels twice the distance between the two ends of the pool.So, Distance travelled by the wave = 2d (where d is the distance between the two ends)The time taken by the wave to travel to the other end, reflect and return = 34.7 sSo, we have:2d = V × t= 0.443 × 34.7= 15.3881 mTherefore, the distance between the two ends of the pool is approximately equal to 15.4 m. Answer:15.4 m

For more information on frequency visit:

brainly.com/question/29739263

#SPJ11


Related Questions

what is the largest wavelength λmaxλmaxlambda_max in the balmer series

Answers

The largest wavelength in the Balmer series is 656.3 nanometers, which corresponds to the transition from the n=3 energy level to the n=2 energy level.

The Balmer series is a sequence of six wavelengths emitted by the hydrogen atom as a result of changes in the electron's energy levels. When an electron in the hydrogen atom drops from a higher energy level to the n=2 level, a photon is emitted whose wavelength lies in the visible part of the electromagnetic spectrum. The largest wavelength in the Balmer series is 656.3 nanometers, which corresponds to the transition from the n=3 energy level to the n=2 energy level.

The Balmer series is the visible portion of the hydrogen atom's emission spectrum. When an electron in the hydrogen atom drops from a higher energy level to the n=2 level, a photon is emitted whose wavelength lies in the visible part of the electromagnetic spectrum. The Balmer series is a sequence of six wavelengths emitted by the hydrogen atom as a result of changes in the electron's energy levels. The largest wavelength in the Balmer series is 656.3 nanometers, which corresponds to the transition from the n=3 energy level to the n=2 energy level.

Balmer series is only one of several series that hydrogen can emit. The other series include the Lyman series (in the ultraviolet), the Paschen series (in the infrared), and the Brackett series (in the far infrared). The Rydberg formula can be used to calculate the wavelengths of all the series of hydrogen emission spectrums.

To know more about wavelength visit:

https://brainly.com/question/31143857

#SPJ11

calculate the amount of work done to move 1 kg mass from the surface of the earth to a point 10⁵ km from the centre of the earth

Answers

The  quantum of work done to move a 1 kg mass from the  face of the earth to a point 10 ⁵ km from the centre of the earth is4.92 x 10 ⁸J.    

The  quantum of work done to move 1 kg mass from the  face of the earth to a point 10 ⁵ km from the centre of the earth can be calculated using the gravitational implicit energy formula.

The gravitational implicit energy is the  quantum of work done by an external force in bringing an object from  perpetuity to a point in space where it can be  told  by  graveness. When an object is moved from the  face of the earth to a point 10 ⁵ km from the centre of the earth, the gravitational implicit energy of the object increases.  

The formula for gravitational implicit energy is given by  U = - GMm/ r  where U is the gravitational implicit energy  G is the universal gravitational constant  M is the mass of the earth  m is the mass of the object  r is the distance between the object and the centre of the earth.  

We know that the mass of the object is 1 kg,  the mass of the earth is    and the distance from the centre of the earth to a point 10 ⁵ km down is           Plugging these values into the formula, we get         thus, the  quantum of work done to move a 1 kg mass from the  face of the earth to a point 10 ⁵ km from the centre of the earth is 4.92 x 10 ⁸J.

the mass of the earth is [tex]5.97 * 10^2^4 kg[/tex],

and the distance from the centre of the earth to a point 10⁵ km away is:

[tex]= 6.38 * 10^6 + 10^5 km[/tex]

[tex]= 6.48 * 10^6 km[/tex]

[tex]= 6.48 * 10^9 m[/tex].

Plugging these values into the formula, we get

[tex]U = -6.67 * 10^-^1^1 * 5.97 * 10^2^4 * 1 / 6.48 * 10^9[/tex]

   [tex]= -4.92 * 10^8 J[/tex]

Therefore, the amount of work done to move a 1 kg mass from the surface of the earth to a point 10⁵ km from the centre of the earth is 4.92 x 10⁸ J.

For more such questions on work, click on:

https://brainly.com/question/8119756

#SPJ8

A car of mass 1000kg is travelling down a steep hill. The brakes fail and the driver uses a horizontal sand-filled safety road to stop the car.
The car enters the sand at a speed of 10 m / s and experiences a constant stopping force of
2500N.
How far does the car travel in the sand before coming to rest?
A 2.0 m
B 4.0 m
C 20 m
D 40 m

Answers

The car travels a distance of C. 20 meters in the sand before coming to rest.

To determine how far the car travels in the sand before coming to rest, we can use the principle of work-energy.

The work-energy principle states that the work done on an object is equal to its change in kinetic energy. In this case, the work done by the stopping force on the car will be equal to the initial kinetic energy of the car.

The work done is given by the equation:

Work = Force × Distance

Since the force is constant at 2500 N, and the work done is equal to the initial kinetic energy, we have:

2500 N × Distance = (1/2) × mass × velocity²

Substituting the given values:

2500 N × Distance = (1/2) × 1000 kg × (10 m/s)²

2500 N × Distance = 50000 J

Distance = 50000 J / 2500 N

Distance = 20 m

Therefore, the car travels a distance of 20 meters in the sand before coming to rest. By equating the work done by the stopping force to the initial kinetic energy of the car, we found that the car travels a distance of 20 meters in the sand before coming to rest. Therefore, Option C is correct.

Know more about principle of work-energy here:

https://brainly.com/question/10063455

#SPJ8

In the greenhouse effect, far infrared radiation is earth's surface and absorbed and reemitted by gases in the atmosphere. These gases have _____ in concentration over the past century.
a. Increased
b. Decreased
c. Remained constant
d. Varied unpredictably

Answers

In the greenhouse effect, far infrared radiation is earth's surface and absorbed and reemitted by gases in the atmosphere. The issue of global warming has received a lot of attention and has prompted a lot of research to better understand its impacts and how we can mitigate it. Therefore, the correct answer is (a) increased.

The greenhouse effect is defined as a phenomenon in which the atmosphere of the earth traps the sun's warmth on the surface of the planet. It is known that far-infrared radiation is emitted by the Earth's surface and absorbed and re-emitted by gases present in the atmosphere. These gases include water vapor, carbon dioxide, and methane, among others.

The concentration of these gases in the atmosphere has increased over the past century.  a. Increased The amount of carbon dioxide in the atmosphere, for example, has increased by over 30% in the last 100 years.

This rise in greenhouse gases has contributed to global warming, as the Earth's temperature rises in response to the additional trapped heat. As a result, the issue of global warming has received a lot of attention and has prompted a lot of research to better understand its impacts and how we can mitigate it. Therefore, the correct answer is (a) increased.

To know more about Radiation  visit :

https://brainly.com/question/29071039

#SPJ11

The electric field strength 5.0 cm from a very long charged wire is 3700 n/c. What is the electric field strength 10.0 cm from the wire?

Answers

The electric field strength 10.0 cm from the wire is 1032.25 N/C. It is given that the electric field strength at a distance of 5.0 cm from a long charged wire is 3700 N/C.

Since the charged wire is very long, its electric field is radial, and the magnitude of the electric field varies with distance r from the wire according to the equation:

E = λ/(2πεor), where λ is the linear charge density (charge per unit length), εo is the permittivity of free space (8.85 × 10−12 C2/Nm2), and 2πr is the circumference of a circle of radius r centered on the wire.

To find the electric field strength at a distance of 10.0 cm, substitute r = 10.0 cm = 0.1 m into the formula and solve for E:

E = λ/(2πεor)

E = (3700 N/C)(2π)(8.85 × 10−12 C2/Nm2)/(2 × 0.1 m)

E = 1032.25 N/C

Therefore, the electric field strength 10.0 cm from the wire is 1032.25 N/C.

The electric field strength 5.0 cm from a very long charged wire is 3700 N/C.

The electric field strength varies with distance r from the wire according to the equation: E = λ/(2πεor).

To find the electric field strength at a distance of 10.0 cm, substitute r = 10.0 cm = 0.1 m into the formula and solve for E:

E = λ/(2πεor)

E = (3700 N/C)(2π)(8.85 × 10−12 C2/Nm2)/(2 × 0.1 m)

E = 1032.25 N/C

Therefore, the electric field strength 10.0 cm from the wire is 1032.25 N/C.

Learn more about electric field here:

https://brainly.com/question/17093047

#SPJ11

what is the wavelength from a radio station having frequency 107.7 mhz?

Answers

The wavelength of the radio wave from the radio station with a frequency of 107.7 MHz is approximately 2.78 meters.

To calculate the wavelength of a radio wave, we can use the formula:

wavelength (λ) = speed of light (c) / frequency (f)

Where:

c is the speed of light (approximately 3.00 × 10⁸ meters per second)

f is the frequency of the radio wave

Given that the frequency of the radio station is 107.7 MHz, we need to convert it to hertz (Hz) by multiplying it by 10⁶:

f = 107.7 MHz × 10⁶ Hz/MHz = 107.7 × 10⁶ Hz

Now we can calculate the wavelength:

λ = (3.00 × 10⁸ m/s) / (107.7 × 10⁶ Hz)

λ = 2.78 meters

Therefore, the wavelength of the radio wave = 2.78 meters.

Learn more about radio wave here:

https://brainly.com/question/29544736

#SPJ11

The wavelength from a radio station having frequency 107.7 MHz can be found using the formula:

Wavelength = Speed of Light / Frequency

Using the formula Wavelength = Speed of Light / Frequency, the wavelength can be found by substituting the given values.

Speed of light = 3 × 108 m/s

Frequency = 107.7 × 106 Hz (since 1 MHz = 106 Hz)Therefore, the wavelength = (3 × 108 m/s) / (107.7 × 106 Hz)= 2.7816 m

Radio waves have different wavelengths which ranges from about 1 millimeter to 100 kilometers and frequencies ranging from about 300 GHz to 3 kHz respectively. Radio waves with higher frequencies have shorter wavelengths, and radio waves with lower frequencies have longer wavelengths.

The formula to calculate the wavelength of a radio wave is given by the equation; Wavelength = Speed of Light / Frequency.

The speed of light in a vacuum is always constant and has a value of 3 × 108 m/s. The frequency is given as 107.7 MHz. We first convert it to Hz as follows: 1 MHz = 106 Hz

Therefore, 107.7 MHz = 107.7 × 106 Hz

Now we can substitute the values in the formula:

Wavelength = Speed of Light / Frequency= 3 × 108 m/s / 107.7 × 106 Hz= 2.7816 m

Therefore, the wavelength of the radio wave from the station is 2.7816 m.

Learn more about radio waves: https://brainly.com/question/13989450

#SPJ11

A surfer floating beyond the breakers notes 17 waves per minute passing her position. If the wavelength of these waves is 38 , what is their speed? A surfer floating beyond the breakers notes 17 waves per minute passing her position. If the wavelength of these waves is 38 , what is their speed?

Answers

To calculate the speed of the waves, we can use the formula: Speed = Frequency × Wavelength

Given that the surfer notes 17 waves per minute and the wavelength is 38 units, we can substitute these values into the formula: Speed = 17 waves/minute × 38 units/wave. To determine the unit of speed, we need to know the unit of the wavelength. Let's assume the wavelength is given in meters. In that case, the unit of speed will be meters per minute. Calculating the speed: Speed = 17 waves/minute × 38 units/wave = 646 units/minute. Therefore, the speed of the waves is 646 meters per minute.

To learn more about Wavelength, https://brainly.com/question/21140978

#SPJ11

A cylinder is inscribed in a right circular cone of height 6.5 and radius (at the base) equal to 4.5. What are the dimensions of such a cylinder which has maximum volume?
Radius ?
Height ?

Answers

The dimensions of the cylinder with maximum volume are:Radius = 4.5, Height = 6.5

the cylinder is inscribed in the cone, the height of the cylinder is equal to the height of the cone, which is 6.5.To find the radius of the cylinder, we need to consider similar triangles formed by the cone and the cylinder. The radius of the cone at the base is 4.5, and the height of the cone is 6.5. The radius of the cylinder will be a fraction of the radius of the cone: By using the similar triangles, we can set up the following equation: r / 4.5 = h / 6.5.

Simplifying the equation, we get: r = (4.5 * h) / 6.5
Since we know the height of the cylinder is equal to the height of the cone, we can substitute h = 6.5 into the equation:
r = (4.5 * 6.5) / 6.5. r = 4.5 .Therefore, the radius of the cylinder is 4.5.The height of the cylinder is the same as the height of the cone, which is 6.5. So, the dimensions of the cylinder with maximum volume are:
Radius = 4.5, Height = 6.5

To learn more about cylinder:

https://brainly.com/question/10048360

#SPJ11

farmer has 7000 meters of fencing, and wants to enclose a rectangular plot that borders on a river. if farmer does not fence the side along the river, what is the largest area that can be enclosed? The largest area that can be enclosed is SQUARE METER

Answers

The largest area that can be enclosed is 1,221,250 square meters.

Let's assume that the length and width of the rectangular plot are 'L' and 'W', respectively. There are two widths and two lengths with fencing. We know that one of the lengths will be equal to the length of the other side along the river.

Therefore, we can have the following equation:

2L + W = 7000 - L, which can be simplified as:

3L + W = 7000 (Equation 1)

Also, the area of the rectangular plot can be expressed as:

L x W (Equation 2)

Now, we need to maximize the area of the plot by substituting Equation 1 into Equation 2.

L x W = L x (7000 - 3L)

Simplifying the above equation, we get:

L² - 3500L + area = 0 (Equation 3)

area = L x (7000 - 3L)

As we want to maximize the area, we need to find the maximum value of Equation 3. By solving this equation using the quadratic formula, we get:

L = 1750 meters area = 1,221,250 square meters

Therefore, the largest area that can be enclosed is 1,221,250 square meters.

To know more about maximizing the area visit:

https://brainly.com/question/32212594

#SPJ11

Your velocity is given by v(t) = t^2 + 6 in m/sec, with t in seconds. Estimate the distance, s, traveled between t=0 and t=5. Use an overestimate with data every one second

Answers

The overestimated distance traveled between t=0 and t=5 is 158 meters.

To estimate the distance traveled, we can use the trapezoidal rule to approximate the area under the curve of the velocity function v(t). The trapezoidal rule divides the interval [0, 5] into subintervals with a width of 1 second and approximates each subinterval as a trapezoid. The formula for the trapezoidal rule is ∫[a,b] f(x) dx ≈ ∑[(i=1 to n)] [f(x_i-1) + f(x_i)] * Δx / 2, where Δx is the width of each subinterval.

Using this formula, we can calculate the overestimated distance traveled:

s ≈ [f(0) + 2f(1) + 2f(2) + 2f(3) + 2f(4) + f(5)] * Δt / 2

≈ [0 + 2(1^2 + 6) + 2(2^2 + 6) + 2(3^2 + 6) + 2(4^2 + 6) + (5^2 + 6)] * 1 / 2

≈ 158 meters.

This provides an overestimate of the distance traveled between t=0 and t=5.

For more questions like Velocity click the link below:

https://brainly.com/question/30559316

#SPJ11

Find the rest energy, in terajoules, of a 15.3 g piece of chocolate. 1 TJ is equal to 102 J. rest energy TJ

Answers

The rest energy of a 15.3 g piece of chocolate is approximately 1.377 terajoules.

The rest energy of an object can be calculated using Einstein's mass-energy equivalence principle, which states that the rest energy (E) of an object is equal to its mass (m) multiplied by the speed of light squared (c^2).

The speed of light (c) is approximately 3.0 × 10^8 meters per second.

Given that the mass of the chocolate is 15.3 g, we need to convert it to kilograms before we can calculate the rest energy.

1 g = 0.001 kg

Therefore, the mass of the chocolate is 15.3 g × 0.001 kg/g = 0.0153 kg.

Now we can calculate the rest energy:

E = m * c^2

E = 0.0153 kg * (3.0 × 10^8 m/s)^2

E = 0.0153 kg * (9.0 × 10^16 m^2/s^2)

E = 1.377 × 10^15 J

To convert the rest energy to terajoules, we divide by the conversion factor:

1 TJ = 10^12 J

Rest energy (in TJ) = 1.377 × 10^15 J / (10^12 J/TJ)

Rest energy (in TJ) ≈ 1.377 TJ

Therefore, the rest energy of a 15.3 g piece of chocolate is approximately 1.377 terajoules.

To learn more about rest energy click here

https://brainly.com/question/31796191

#SPJ11

A chinook salmon, which is a type of fish, has a maximum underwater speed of 3.58 m , but it can jump out of water with a speed of 6.26 m . To move upstream past a waterfall the salmon does not need to jump to the top of the fall, but only to a point in the fall where the water speed is less than 3.58 m ; it can then swim up the fall for the remaining distance. Because the salon must make forward progress in the water, let’s assume it can swim to the top if the water speed is 3.00 m or less. Assume the water has a horizontal speed of 1.50 m as it passes over the top ledge of the waterfall.

D) If the salmon is forced to jump so its body is at an angle that matches the velocity of the water that it enters (as shown in the video), what is the maximum height of the waterfall?

Answers

A Chinook salmon, which is a type of fish, has a maximum underwater speed of 3.58 m/s, but it can jump out of water with a speed of 6.26 m/s.

To move upstream past a waterfall the salmon does not need to jump to the top of the fall, but only to a point in the fall where the water speed is less than 3.58 m/s; it can then swim up the fall for the remaining distance. Because the salmon must make forward progress in the water, let’s assume it can swim to the top if the water speed is 3.00 m/s or less. Assume the water has a horizontal speed of 1.50 m/s as it passes over the top ledge of the waterfall. The maximum height of the waterfall when the salmon is forced to jump so its body is at an angle that matches the velocity of the water that it enters can be determined.

As the salmon swims up the waterfall, it will experience a force of the stream's speed. The salmon is only able to move upstream if it swims faster than the stream. Assume the water has a horizontal speed of 1.50 m/s as it passes over the top ledge of the waterfall. Because the salmon must make forward progress in the water, let’s assume it can swim to the top if the water speed is 3.00 m/s or less.Thus, the speed of the salmon relative to the waterfall when it leaps from the water is:[tex]v = 6.26 m/s - 1.50 m/s = 4.76 m/s[/tex]According to the problem statement, the salmon can swim upstream if the water speed is 3.00 m/s or less. Therefore, if the salmon is moving at 4.76 m/s relative to the water, the salmon can swim upstream if the water speed is[tex]v_w = 4.76 m/s - 3.00 m/s = 1.76 m/s[/tex]To determine the maximum height of the waterfall, we must determine the height above which the water has a speed of 1.76 m/s. Therefore, the maximum height of the waterfall when the salmon is forced to jump so its body is at an angle that matches the velocity of the water that it enters is approximately 0.16 meters.

To know more about underwater speed  visit :-

https://brainly.com/question/2611546

#SPJ11

In which one of the following cases is the displacement of the object directly proportional to the elapsed time? a ball at rest is given a constant acceleration O a rocket fired from the earth's surface experiences an increasing acceleration a ball rolls with constant velocity a ball rolling with velocity vo is given a constant acceleration a bead falling through oil experiences a decreasing acceleration

Answers

The case in which the displacement of the object is directly proportional to the elapsed time is when a ball rolls with constant velocity.

When the displacement of an object is directly proportional to the elapsed time, it means that the object is moving with a constant velocity. In this scenario, the object covers equal displacements in equal intervals of time.

1. A ball at rest is given a constant acceleration:

In this case, the ball starts from rest and experiences a constant acceleration. As a result, the velocity of the ball increases with time, and the displacement is not directly proportional to the elapsed time. The object is accelerating.

2. A rocket fired from the Earth's surface experiences an increasing acceleration:

Similar to the first case, the rocket is experiencing an increasing acceleration, which means its velocity is increasing over time. The displacement is not directly proportional to the elapsed time. The object is accelerating.

3. A ball rolls with constant velocity:

In this case, the ball is moving with a constant velocity. Since the velocity is constant, the displacement of the ball will be directly proportional to the elapsed time. The object is moving with constant velocity.

4. A ball rolling with velocity v₀ is given a constant acceleration:

When the ball is given a constant acceleration, its velocity will change over time. The displacement will not be directly proportional to the elapsed time. The object is accelerating.

5. A bead falling through oil experiences a decreasing acceleration:

In this case, the bead is experiencing a decreasing acceleration, which means its velocity is decreasing over time. The displacement is not directly proportional to the elapsed time. The object is decelerating.

Therefore, the case where the displacement of the object is directly proportional to the elapsed time is when a ball rolls with constant velocity.

To know more about displacement refer here:

https://brainly.com/question/29769926#

#SPJ11

.A flywheel with a radius of 0.300m starts from rest and accelerates with a constant angular acceleration of 0.400rad/s2 .
A) Compute the magnitude of the tangential acceleration, the radial acceleration, and the resultant acceleration of a point on its rim at the start. (Answers are 0.21,0,0.21 m/s^2)
B) Compute the magnitude of the tangential acceleration, the radial acceleration, and the resultant acceleration of a point on its rim after it has turned through 60.0?
C) Compute the magnitude of the tangential acceleration, the radial acceleration, and the resultant acceleration of a point on its rim after it has turned through 120?.

Answers

The magnitudes of tangential acceleration, radial acceleration, and resultant acceleration can be computed for different angular positions of a point on the rim of the flywheel.

How can the magnitudes of tangential, radial, and resultant acceleration be calculated for different angular positions of a point on the flywheel's rim?

A) At the start (0°), the magnitude of the tangential acceleration is 0.21 m/s², the radial acceleration is 0 m/s², and the resultant acceleration is 0.21 m/s².

B) After turning through 60°, the magnitude of the tangential acceleration is 0.21 m/s², the radial acceleration is 0.12 m/s², and the resultant acceleration is 0.24 m/s².

C) After turning through 120°, the magnitude of the tangential acceleration is 0.21 m/s², the radial acceleration is -0.21 m/s², and the resultant acceleration is 0 m/s².

Learn more about Tangential acceleration

brainly.com/question/15743294

#SPJ11

A 24.0 kg child plays on a swing having support ropes that are 1.80 m long. A friend pulls her back until the ropes are 45.0 degree from the vertical and releases her from rest. What is the potential energy for the child as she is released, compared with the potential energy at the bottom of the swing? How fast will she be moving at the bottom of the swing? How much work does the tension in the ropes do as the child swings from the initial position to the bottom?

Answers

The potential energy for the child as she is released is 82.1 J, she will be moving at a speed of 4.01 m/s at the bottom of the swing, and the work done by the tension in the ropes as the child swings from the initial position to the bottom is 193 J.

A 24.0 kg child is playing on a swing having support ropes that are 1.80 m long. A friend pulls her back until the ropes are 45.0 degree from the vertical and releases her from rest. The potential energy for the child as she is released, compared with the potential energy at the bottom of the swing is given by;`U = mgh``U = 24.0 kg × 9.81 m/s^2 × (1.8 m - 1.8m cos 45°)`On solving this equation, we get `U = 82.1 J`

The potential energy at the bottom of the swing is equal to kinetic energy at the top of the swing since there is no external work done on the system. Therefore, the kinetic energy of the child when she is at the bottom of the swing is equal to the potential energy of the child when she is released.

Kinetic energy at the bottom of the swing is given by;`K = (1/2)mv^2``82.1 J = (1/2) × 24.0 kg × v^2``v = 4.01 m/s`The work done by the tension in the ropes as the child swings from the initial position to the bottom is given by;`W = ∆K = Kf - Ki``W = (1/2)mvf^2 - (1/2)mvi^2``W = (1/2) × 24.0 kg × (4.01 m/s)^2 - (1/2) × 24.0 kg × 0 m/s``W = 193 J`

Therefore, the potential energy for the child as she is released is 82.1 J, she will be moving at a speed of 4.01 m/s at the bottom of the swing, and the work done by the tension in the ropes as the child swings from the initial position to the bottom is 193 J.

To learn more about potential visit;

https://brainly.com/question/28300184

#SPJ11

Part A An astronaut on another planet drops a 1.kg rock from rest. The astronaut notices that the rock falls 2 meters straight down in one second. On this planet, how much does the rock weigh? 1 N 5N 10 N 4N

Answers

On earth, the value of acceleration due to gravity is approximately 9.81 m/s^2.  Therefore, if the mass of an object is 1 kg, its weight will be 9.81 N. nearest value is 10N therefore option c

Part A:

Given that an astronaut on another planet drops a 1 kg rock from rest. The astronaut notices that the rock falls 2 meters straight down in one second. We are required to find how much does the rock weigh on this planet.

As per the given information,

Acceleration due to gravity (g) = 2 m/s^2Mass (m) = 1 kg

The formula for weight (W) of an object is given as:

W = m × g

Substituting the given values in the above equation, we get

W = 1 kg × 2 m/s^2W = 2 N

Therefore, the rock weighs 2 N on this planet.

Part B:

The weight of an object is the force acting on it due to gravity. It is a vector quantity, which means it has both magnitude and direction. The weight of an object is directly proportional to its mass and the acceleration due to gravity. It can be measured in Newtons (N).

On earth, the value of acceleration due to gravity is approximately 9.81 m/s^2.

However, the value of acceleration due to gravity is different on different planets, which means the weight of an object will also differ on different planets. For example, on the moon, the value of acceleration due to gravity is approximately 1.62 m/s^2.

Therefore, if the mass of an object is 1 kg, its weight will be 1.62 N on the moon.

The weight of an object can be determined using a spring balance or a weighing scale. The spring balance works on the principle of Hooke's law, which states that the force applied on a spring is directly proportional to its extension. When an object is suspended from a spring balance, the spring extends due to the force of gravity acting on the object. The weight of the object can be calculated by measuring the extension of the spring. The weighing scale works on the principle of measuring the force applied on a rigid body due to the weight of an object. When an object is placed on a weighing scale, its weight exerts a force on the rigid body, which is then measured by the scale.

to know more about spring balance visit:

https://brainly.com/question/1597448

#SPJ11

explain why we do not get a lunar and solar eclipse every month.

Answers

We do not get a lunar and solar eclipse every month because of the fact that the Moon's orbital plane is not aligned with the Earth's orbit around the Sun.

In order for a lunar or solar eclipse to occur, there must be an alignment between the Earth, the Moon, and the Sun. During a lunar eclipse, the Earth passes between the Sun and the Moon, casting a shadow on the Moon. Meanwhile, during a solar eclipse, the Moon passes between the Sun and the Earth, blocking out the Sun's light. However, the Moon's orbit is tilted at an angle of about 5 degrees to the Earth's orbit around the Sun. As a result, the Moon does not always pass through the Earth's shadow during a full moon (lunar eclipse) or align perfectly with the Sun during a new moon (solar eclipse). This is why lunar and solar eclipses are relatively rare occurrences.

Every month, the Moon goes through its phases as it orbits the Earth. At the new moon, the Moon is between the Earth and the Sun, but it does not necessarily block out the Sun's light because the Moon's orbit is tilted slightly. Likewise, at the full moon, the Moon is on the opposite side of the Earth from the Sun, but it does not always pass through the Earth's shadow because of the same tilt. So, lunar and solar eclipses can only occur when the Moon is in just the right position relative to the Sun and Earth. The occurrence of a lunar or solar eclipse is also dependent on the geometry of the three bodies; they have to be in alignment. Additionally, Earth's atmosphere plays a role in the occurrence of solar and lunar eclipses. If the atmosphere is filled with smoke or dust, or if the Earth's atmosphere is very clear, this can impact the visibility of the eclipses. Ultimately, the rarity of eclipses is due to the complex interplay of many factors, including the Moon's orbit, the Earth's orbit around the Sun, and the geometry of the three bodies.

To know more about solar eclipse visit :-

https://brainly.com/question/12075389

#SPJ11

Constants The magnetic field in a EM wave traveling in free space has an rms strength of 24.5 nt. Part A How long does it take to deliver 355 J of energy to 1.05 cm? of a wall that it hits perpendicularly? Express your answer using three significant figures. IV ALQ R O O ?

Answers

The time taken by the wave to deliver energy to a wall of 1.05 cm² area is 0.753 μs. The RMS strength of the magnetic field in an EM wave traveling in free space is 24.5 nt and energy delivered to 1.05 cm2 of a wall is 355J.

Solution: Part A The energy delivered by an electromagnetic wave per second per unit area is given as

Poynting vector= [tex][E × B]/μ0[/tex]

Here,E is the electric field strength, B is the magnetic field strength and

μ0 is the permeability of free space. If the energy delivered to the area, dA, is dE, in time dt, then from the above equation

Poynting vector=[tex]dE/dt × dA[/tex]

On integration, the total energy delivered by the wave over time t is given as[tex]E= 1/μ0 × ∫p dt[/tex]

Since the Poynting vector, [tex]|P|= EB/μ0[/tex] and the strength of the magnetic field in the EM wave is given as B = Brms

Hence the Poynting vector is given as

[tex]|P|= ErmsBrms/μ0[/tex]

= Erms²/377 watts/m²

The energy delivered to an area, dA, in time dt is given by

[tex]dE= P dt × dA[/tex]

= Erms²/377 × dt × dA

The energy delivered to an area A in time dt is given by

dE = Erms²/377 × A × dt

The total energy delivered to an area, A, in time t is given by

E = ∫dE = Erms²/377 × A × ∫dtE

= Erms²/377 × A × t

Thus, the time duration of an EM wave to deliver energy, E, to an area, A, is given by

t = 377 E / (Erms)² × A

Here,E = 355J

A = 1.05 cm²

= 1.05 × 10⁻⁴ m²Brms

= 24.5 nT

= 24.5 × 10⁻⁹ Tt

= 377 × 355 / (24.5 × 10⁻⁹)² × 1.05 × 10⁻⁴

= 7.53 × 10⁻⁷ seconds

= 0.753 μs (rounded to three significant figures)

Answer: The time taken by the wave to deliver energy to a wall of 1.05 cm² area is 0.753 μs.

To learn more about magnetic visit;

https://brainly.com/question/3617233

#SPJ11

Given that E = 15ax - 8az V/m at a point on the surface of a conductor, determines the surface charge density at that point. Assume that ε = £0. a. 1.50x10-10 b. 2.21x10-10 c. 1.91x10-10 d. 2.12x10-10

Answers

The surface charge density at that point with Electric field, E=15ax-8az V/m with permittivity in free space is ε=ε₀ is, σ=1.5×10⁻¹⁰ c/m². Hence, option A is correct.

The Gauss law is defined as the electric flux of the closed surface is equal to the charge enclosed by the given area. Electric flux is defined as the number of field lines crossing through a given area.

From the given area,
E = 15ax-8az V/m

ε=ε₀ (ε₀ is the permittivity in free space)=8.854×10⁻¹².

surface charge density, (σ) =?

E = σ/ε₀

σ = E×ε₀

  = (15ax-8az)×8.854×10⁻¹².

  = √(15)²+(8)²×8.854×10⁻¹².

  = 17×8.854×10⁻¹².

  = 1.50×10⁻¹⁰C/m².

Thus, the surface charge densities, σ = 1.50×10⁻¹⁰ C/m².

To learn more about Gauss law:

https://brainly.com/question/30516416


#SPJ4

if you have 1000 lambda baryons traveling at beta =0.6 with
proper lifetime ct=8cm, whats the average distance before they
decay?

Answers

The average distance traveled by 1000 lambda baryons before they decay is approximately 48.0 meters.

The proper lifetime of a particle, denoted as ct, is the time it takes for the particle to decay when at rest in its own frame of reference. The quantity β represents the velocity of the particles relative to the speed of light, where β = v/c.

To calculate the average distance traveled before decay, we can use the formula:

Average distance = βct

Given that β = 0.6 and ct = 8 cm, we need to convert ct to meters for consistency. 1 cm is equal to 0.01 meters.

Substituting the values into the formula:

Average distance = 0.6 * 8 cm = 0.6 * 8 * 0.01 m = 0.048 m

Since we have 1000 lambda baryons, we multiply the average distance by 1000 to account for all the particles:

Average distance for 1000 lambda baryons = 0.048 m * 1000 = 48 m

Therefore, the average distance traveled by 1000 lambda baryons before they decay is approximately 48 meters.

To know more about distance, refer here:

https://brainly.com/question/30145106#

#SPJ11

Once a carousel is in motion, the constant movement of the carousel horse around the
center of the circle can BEST be described as:

A) Acceleration; Change in speed
B) Velocity; Speed plus direction
C) Acceleration; Chang in velocity
D) Speed; Distance traveled over time

Answers

The constant movement of the carousel horse around the center of the circle can BEST be described as velocity; speed plus direction.

The correct answer to the given question is option B.

Velocity is the vector that describes how fast and in what direction something moves. It has a magnitude (the speed of the movement) and a direction (the direction of the movement). The motion of the carousel horse is circular and, as a result, has a constant speed (distance travelled over time) and a direction (tangential to the circumference of the circle). Therefore, it can be described as velocity.

Acceleration is a measure of how fast the velocity is changing, and in the case of the carousel, the horse is not changing direction or speed, so it is not experiencing any acceleration. Finally, speed and distance traveled over time are related but do not describe the direction of the motion.

Since the motion of the carousel horse is circular, speed and distance traveled over time alone do not provide a complete description. Thus, the best answer is velocity; speed plus direction.

For more such questions on speed, click on:

https://brainly.com/question/13943409

#SPJ8

explain why a projectile release add an angle of 60° and 30° both
travel the same range

Answers

A projectile launched at angles of 60° and 30° will travel the same range due to the symmetrical nature of projectile motion. The horizontal and vertical components of motion are independent of each other, and the range depends only on the initial speed and the launch angle.

When a projectile is launched at an angle, it follows a curved trajectory due to the combination of its horizontal and vertical motions. The horizontal component of the projectile's velocity remains constant throughout its flight, while the vertical component is affected by gravity.

For a given initial speed, the range of a projectile (the horizontal distance it travels) is maximized when the launch angle is 45°. This is because at 45°, the initial speed is divided equally between the horizontal and vertical components, resulting in the maximum range.

When the launch angles are 60° and 30°, the components of the initial velocity are divided differently, but the total initial speed remains the same. The component of the initial velocity in the horizontal direction is given by V₀ * cos(θ), and in the vertical direction, it is V₀ * sin(θ), where V₀ is the initial speed and θ is the launch angle.

If we consider two projectiles with the same initial speed, launched at 60° and 30°, the vertical components of their initial velocities will differ, but their horizontal components will be the same. As a result, the time of flight and the vertical displacement will differ, but the horizontal distance traveled (range) will be the same for both projectiles.

The range of a projectile launched at angles of 60° and 30° is the same because the horizontal component of the initial velocity, which determines the range, remains constant. The vertical component of the initial velocity affects the time of flight and vertical displacement but does not impact the range. This can be understood by recognizing that the horizontal and vertical components of motion are independent of each other in projectile motion. The symmetrical nature of the range allows for different launch angles to produce the same horizontal distance traveled as long as the initial speed remains constant.

To know more about projectile motion ,visit:

https://brainly.com/question/10680035

#SPJ11

A tank is filled with an ideal gas at 400 degrees K and pressure of 1.00 atm.

The tank is heated until the pressure of the gas in the tank doubles. What is the temperature of the gas?

Answers

The temperature of the gas after the pressure has doubled is 800 K.

Given that a tank is filled with an ideal gas at 400 K and pressure of 1.00 atm. The tank is heated until the pressure of the gas in the tank doubles.

The ideal gas law can be used to solve the problem.

The ideal gas law states that PV=nRT, where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the ideal gas constant, and T is the temperature of the gas. Since the gas is an ideal gas, it follows that the number of moles of the gas is constant.

We can therefore write that P1V1/T1 = P2V2/T2, where P1 = 1.00 atm, V1 is the initial volume of the gas, T1 = 400 K, P2 = 2.00 atm, and V2 is the final volume of the gas.

Rearranging the equation, we get T2 = T1P2V1/P1V2. Since V2 = V1/2, we can substitute this into the equation to obtain T2 = 400 K * 2.00 atm * V1/(1.00 atm * V1/2) = 800 K.

The temperature of the gas after the pressure has doubled is 800 K.

To know more about ideal gas visit:

brainly.com/question/30236490

#SPJ11

A hollow spherical shell with mass 2.05 kgkg rolls without slipping down a slope that makes an angle of 30.0 ∘∘ with the horizontal.
Find the minimum coefficient of friction μμmu needed to prevent the spherical shell from slipping as it rolls down the slope.

Answers

The minimum coefficient of friction needed to prevent the spherical shell from slipping as it rolls down the slope is 0.31.

Mass of hollow spherical shell, m = 2.05 kg. Angle of slope with the horizontal, θ = 30°. The forces acting on the spherical shell are: Weight, W = mg. Normal force, N = mg cosθForce parallel to the slope, f = mg sinθ. Force of friction, f'. Let R be the radius of the spherical shell. For the shell to not slip on the slope, the force of friction should be equal to the force parallel to the slope and acting on the shell.

Therefore, we have; f' = f (Minimum coefficient of friction needed)mg sinθ = f' = μNμ = (mg sinθ) / (mg cosθ)μ = tanθμ = tan30°μ = 0.31. Hence, the minimum coefficient of friction needed to prevent the spherical shell from slipping as it rolls down the slope is 0.31.

Learn more about friction here:

https://brainly.com/question/13000653

#SPJ11

Which of the following pairs represents a medium frequency band and its common use?
Select one:
a. 3-30 MHz, CB and shortwave radio
b. 300 KHz-3MHz, AM radio
c. 144-174 MHz, TV channels
d. 30-300 KHz, cordless phones

Answers

The frequency range of 144-174 MHz represents a medium frequency band commonly used for TV channels.

a. 3-30 MHz, CB and shortwave radio: This frequency range is considered high frequency (HF) band and is commonly used for Citizens Band (CB) radio communication and shortwave radio broadcasting.

b. 300 KHz-3 MHz, AM radio: This frequency range is known as the medium frequency (MF) band and is used for AM (Amplitude Modulation) radio broadcasting.

c. 144-174 MHz, TV channels: This frequency range falls under the very high frequency (VHF) band and is commonly used for television (TV) broadcasting.

d. 30-300 KHz, cordless phones: This frequency range is part of the low frequency (LF) band and is not typically used for cordless phones. Cordless phones commonly operate in higher frequency ranges, such as the 900 MHz or 2.4 GHz bands.

Therefore, the correct pair representing a medium frequency band and its common use is option c: 144-174 MHz, TV channels.

To know more about  frequency range, click here:

https://brainly.com/question/30647284

#SPJ11

If the intensity of sound is increased by a factor of 30 , by how many decibels is the sound level increased ?
a. 12 dB
b. 14.77 dB
c. 10 dB
d. 13 dB

Answers

By how many decibels is the sound level increased if the intensity of sound is increased by a factor of 30?The sound level is increased by 15 dB when the intensity of sound is increased by a factor of 30.

The relation between sound intensity (I) and sound level (L) is given by:L = 10 log (I/I0)where I0 is the threshold of hearing, which is the reference intensity level.Using this equation, we can find the increase in sound level when the intensity is increased by a factor of 30 as follows:Let L1 be the original sound level and I1 be the original intensity level. Let L2 be the new sound level and I2 be the new intensity level. Then we have:L2 = 10 log (I2/I0)L1 = 10 log (I1/I0)Since the intensity is increased by a factor of 30, we have:I2 = 30 I1Substituting this into the equation for L2, we get:L2 = 10 log (30 I1/I0)L2 = 10 (log 30 + log (I1/I0))L2 = 10 (1.477 + L1)Note that log 30 = 1.477 (approx).Therefore, the sound level is increased by 10 (1.477) = 14.77 dB when the intensity is increased by a factor of 30.

Sound level is a measure of the intensity of sound and is expressed in decibels (dB). Decibels are used because the human ear is sensitive to sound over a wide range of intensities, from the threshold of hearing to the threshold of pain. The decibel scale is logarithmic, which means that a small increase in intensity is represented by a large increase in sound level. For example, an increase in sound level from 60 dB to 70 dB represents a ten-fold increase in intensity.Therefore, the sound level will increase by a certain amount. We can use the relation between sound intensity and sound level to find out how much the sound level will increase.Let L1 be the original sound level and I1 be the original intensity level. Let L2 be the new sound level and I2 be the new intensity level. Then we have:L2 = 10 log (I2/I0)L1 = 10 log (I1/I0)Since the intensity is increased by a factor of 30, we have:I2 = 30 I1Substituting this into the equation for L2, we get:L2 = 10 log (30 I1/I0)L2 = 10 (log 30 + log (I1/I0))L2 = 10 (1.477 + L1)Note that log 30 = 1.477 (approx).Therefore, the sound level is increased by 10 (1.477) = 14.77 dB when the intensity is increased by a factor of 30.

To know more about decibels visit :-

https://brainly.com/question/29068945

#SPJ11

how fast must you be approaching a red traffic light ( λ = 675 nm ) for it to appear yellow ( λ = 575 nm )? express your answer in terms of the speed of light.

Answers

So, to observe the red traffic light as yellow, the observer must approach the light with a speed of 0.148 times the speed of light.

When the observer approaches the red traffic light with a speed, the light appears shifted towards the blue end of the spectrum. The apparent frequency and wavelength shift is calculated using the Doppler effect equation.

The Doppler shift is given by the relation f′= f (v+vO)/c

where, f' is the observed frequency, f is the frequency of the wave, v is the speed of the observer, v O is the speed of the source and c is the speed of the wave.

For the red traffic light,

f= c/λ = 4.44 × 10^14 Hzλ

= 675 nm

For the yellow traffic light,

f = c/λ

= 5.22 × 10^14 Hzλ

= 575 nm

As we know that the light appears yellow when the red light shifts 575 nm.

Therefore, the observer should be approaching the light with a speed given by the relation as,

∆f/f = v/c⇒ ∆λ/λ

= v/c⇒ v

= c (∆λ/λ)

= c [(λ_0 - λ)/λ_0 ]

Where,λ is the wavelength of the shifted light (λ = 575 nm),λ0 is the wavelength of the unshifted light (λ0 = 675 nm)

Therefore,

v = c [(675 - 575)/675]⇒ v

= 0.148c

So, the observer must approach the red traffic light at a speed of 0.148 times the speed of light to observe it as yellow.

An observer, when approaching a red traffic light, experiences a shift in the light's wavelength towards the blue end of the spectrum. This apparent frequency and wavelength shift is given by the Doppler effect equation.

The Doppler shift can be expressed using the relation,

f′= f (v+vO)/c

where, f' is the observed frequency, f is the frequency of the wave, v is the speed of the observer,v O is the speed of the source and c is the speed of the wave.

The frequency and wavelength of the red and yellow traffic lights are,

f= c/λ

= 4.44 × 10^14 Hz,

λ = 675 nm and

f = c/λ

= 5.22 × 10^14 Hz,

λ = 575 nm.

Since we know that the light appears yellow when the red light shifts by 575 nm, the observer must be approaching the light with a velocity given by the following relation:

∆f/f = v/c⇒ ∆λ/λ

= v/c⇒ v

= c (∆λ/λ_0 ) where λ_0 is the wavelength of the unshifted light (λ_0 = 675 nm)

Therefore,

v = c [(675 - 575)/675]⇒ v

= 0.148c

To know more about speed visit:

https://brainly.com/question/28224010

#SPJ11

make sure to add units if needed please :)
What is the value of each of the angles of a triangle whose sides are 151, 190, and 89 cm in length? (Hint: Consider using the law of cosines given in Appendix E.) Units The angle opposite the side of

Answers

To find the value of each angle of a triangle, we can use the law of cosines.

According to the law of cosines, for a triangle with sides of lengths a, b, and c, and the angle opposite side c denoted as C, the following equation holds:

c^2 = a^2 + b^2 - 2ab cos(C)

In this case, the sides of the triangle are given as 151 cm, 190 cm, and 89 cm. Let's denote the angles opposite these sides as A, B, and C, respectively.

Applying the law of cosines to each angle, we have:

(89 cm)^2 = (151 cm)^2 + (190 cm)^2 - 2(151 cm)(190 cm) cos(A)

(151 cm)^2 = (89 cm)^2 + (190 cm)^2 - 2(89 cm)(190 cm) cos(B)

(190 cm)^2 = (89 cm)^2 + (151 cm)^2 - 2(89 cm)(151 cm) cos(C)

Solving these equations will give us the values of angles A, B, and C in radians or degrees, depending on the unit of measurement used.

To know more about "Law of cosines" refer here:

https://brainly.com/question/27336767#

#SPJ11

how to calculate the distance between a sensor and an electric harge

Answers

In order to calculate the distance between a sensor and an electric charge, you need to know the electric field strength produced by the charge and the sensitivity of the sensor to that field strength. The calculation involves using Coulomb's Law to find the electric field strength and then using the inverse square law to determine the distance.

Coulomb's Law states that the force between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. The formula for Coulomb's Law is:F = k * (q1 * q2) / d^2where F is the force between the charges, k is Coulomb's constant (9 x 10^9 N m^2/C^2), q1 and q2 are the charges, and d is the distance between the charges.The electric field strength produced by the charge is given by:E = F / q2where E is the electric field strength and q2 is the test charge (the charge on the sensor).To calculate the distance between the sensor and the charge, you can use the inverse square law, which states that the intensity of a field (in this case, the electric field) is inversely proportional to the square of the distance from the source. The formula for the inverse square law is:I = I0 * (d0 / d)^2where I is the intensity of the field at distance d, I0 is the intensity of the field at distance d0, and d0 is a reference distance (usually chosen to be 1 meter). Rearranging this equation, we get:d = sqrt(I0 / I) * d0So to calculate the distance between the sensor and the charge, you need to first find the electric field strength at the sensor and the electric field strength at a reference distance (e.g. 1 meter). Then you can use the inverse square law to calculate the distance between the sensor and the charge.

Learn more about sensor at

brainly.com/question/15272439

#SPJ11

Suppose an x-ray tube produces x-rays with a range of wavelengths, the shortest of which is 0.0093 nm. (lemda= 0.0093 nm)

What is the accelerating voltage of the x-ray tube in kilovolts?

Answers

The accelerating voltage of the x-ray tube in kilovolts is 1335 kV.

An x-ray tube produces x-rays with a range of wavelengths, the shortest of which is 0.0093 nm. To determine the accelerating voltage of the x-ray tube in kilovolts, we can use the following formula:

Energy of a photon = Planck's constant × frequency of the photon  

Ephoton = h * f

Where Ephoton = hc / λ and

h = Planck's constant = 6.626 x 10⁻³⁴ J s,

c = speed of light = 3 x 10⁸ m/s,

λ = 0.0093 nm.

Therefore, we can calculate f as follows:f = c / λ = (3 x 10⁸) / (0.0093 x 10⁻⁹) Hz = 3.2258 x 10¹⁷ Hz

Then, we can find the energy of a photon:Ephoton = h * f = 6.626 x 10⁻³⁴ J s × 3.2258 x 10¹⁷ Hz = 2.14 x 10¹⁶ J

The energy of a photon is also related to the accelerating voltage, V as follows: Ephoton = eV  where e = the elementary charge = 1.602 x 10⁻¹⁹ C

Therefore, we can find the accelerating voltage, V

:V = Ephoton / e = 2.14 x 10⁻¹⁶ J / 1.602 x 10⁻¹⁹ C = 1335 kV.

Therefore, the accelerating voltage of the x-ray tube in kilovolts is 1335 kV.

Thus, the accelerating voltage of the x-ray tube in kilovolts is 1335 kV.

To know more about Planck's constant visit:

brainly.com/question/30763530

#SPJ11

Other Questions
Excel Online Structured Activity: TIE ratioMPI Incorporated has 16 billion in assets, and its tax rate is 35%. Its basic earning power (BEP) ratio is 11%, and its return on assets (ROA) is 5%. The data has been collected in the Microsoft Excel Online file below. Open the spreadsheet and perform the required analysis to answer the question below.XOpen.spreadsheetWhat is MPI's times-interest-earned (TIE) ratio? Round your answer to two decimal places. which equation results from cross-multiplying? 15(a2 1) = 5(2a 2) 15(2a 2) = 5(a2 1) 15(a2 1)(2a 2) = 5(2a 2)(a2 1) Leek Company predicted that the fixed overhead would be $200,000 in April 2018. Production amounted to 60,000 actual and 50,000 budgeted decks of cards. Each deck takes approximately 0.20 machine hours to produce. The actual overhead costs per machine hour are $25. What is the production-volume variance? O a $40,000 unfavourable Ob $40,000 favourable O c. $150,000 unfavourable Od. $150,000 favourable Oe. $0 Select all of the outcomes below which are Pareto inferior. (Hint: there are more than one.) Ray Drink More Water Who (12,7) (6,11) (7,12) Mary Is (9,2) (4,9) (5,8) It (5,3) (15,2) (3,4) 1.(12,7) 2 (6,11) 03 (7,12) 4.(9,2) 5.(4,9) 06. (5,8) 07.(5,3) 8. (15,2) 9.(3,4) The random variable X, representing the number of cherries in a cherry puff, has the following probability distribution: x 4 5 6 7 P(X=x) 0.1 0.4 0.3 0.2(a) Find the mean and variance of X.(b) Find the probability that the number of cherries in a cherry puff will be no more than 5(c) Find the probability that the average number of cherries in 36 cherry puffs will be no more than 5(d) Find the probability that the average number of cherries in 36 cherry puffs will be greater than 5.5 A fixed exchange rate is an exchange rate whose valueA) reflects the comparative advantage of the home country versus other foreign countriesB) is established annually by the International Monetary FundC) remains fixed at least for a yearD) is set when a country ties the value of its currency to some other widely-used commodity or curret Which conflict is MOST clearly described in the last paragraph ofthe passage?O A. the serenity of the present vs. the turmoil of the pastO B. the ferocity of a soldier vs. the humor of a sailorO C. the power of nature vs. the authority of a human.O D. the difficulty of labor vs. the enjoyment of ease TOPIC: Crowd TheoryThe LeaderAccording to LeBon but not Arendt was central to the creation of mass movementsAccording to Arendt but not LeBon was central to the creation of amss movementsAccording to both LeBon and arendt was central to the creation of mass movementsAccording to LeBon and Arendt was completly irrelevant to the creation of mass movements 3. The demand for a product is D(p) = 65 p. There are an indefinite number of potential firms, each of them witha total cost function C(q) = 4 + q + q2. Determine:a) What is the fixed cost of each firm?b) What is the variable cost of each firm?c) What is the supply of each firm?d) In the long-run: What is the total number of firms that will operate in this market?Assume demand drops to D(p) = 63 q.e) What will happen to the market structure (price and number of firms) in the short-run?f) What will happen to the market structure (price and number of firms) in the long-run? One of the assumptions of the constant dividend growth model is:options:A Dividends increase by a positive amount each year.B Dividends either remain constant or increase by a positive amount each year.C The capital gains yield is a positive valueDThe growth rate in dividends is greater than the discount rate.EThe discount rate is greater than the growth rate in dividends. a) A fair coin is tossed 4 times. i) Use counting methods to find the probability of getting 4 consecutive heads HHHH. ii) Use counting methods to find the probability of getting the exact sequence HT The best predictor of effectiveness and life success is your? 1)IQ level 2)EQ Level (emotional intelligence) 3)SAT scores and college G.P.A. 4)your weight how do you display a double quote inside a string that begins and ends with double quotes? Qualifying taxpayers whose Child Tax Credit was limited by their tax liabilities may qualify for:An additional exemption.The Additional Child Tax Credit.An additional itemized deduction.An additional nonrefundable credit. QuestionWhich of the following animals is incorrectly paired with its feeding mechanism? a. lionsubstrate feeder b. baleen whalesuspension feeder c. aphidfluid feeder d. clamsuspension feeder e. snakebulk feeder find the radius of convergence, r, of the series. [infinity] xn 4 4n! n = 0 r = find the interval, i, of convergence of the series. (enter your answer using interval notation.) what vendor selection criteria are described by price and financial stability? On dec. 31, 2020, ABC Corp issued 4-year, 7% bonds with $3,000,000 as par value. ABC Corp. received $3,360,000 in cash. the bond interest is paid semiannually on june 30 and December 31 every year.Compute the following:Total bonds premium:Interest Paid in cash semianually:The Semiannual amortization amount of the bond premium:Total bonds interest expense over the 4 years: At the beginning of the month, the Painting Department of Skye Manufacturing had 23,000 units in inventory, 70% complete as to materials, and 25% complete as to conversion. The cost of the beginning inventory, $31,650, consisted of $25,400 of material costs and $6,250 of conversion costs. During the month the department started 118,000 units and transferred 124,500 units to the next manufacturing department. Costs added in the current month consisted of $298,600 of materials costs and $541,910 of conversion costs. At the end of the month, the department had 16,500 units in inventory, 40% complete as to materials and 10% complete as to conversion. If Skye Manufacturing uses the weighted average method of process costing, compute the costs per equivalent unit of materials and conversion respectively for the Painting Department. 00:54:26 Ask Multiple Choice $2.47; $4.35. $2.22; $4.29. $2.54; $4.40. $2.54; $4.29. $2.82; $4.55. 6. Duval Manufacturing industries, Inc., orally engaged Harris as one of its district sales managers for and 18-month period commencing April 1, 1980. Harris commenced work on that date and performed his duties in a highly competent manner for several months. On October 1,1980, the company gave Harris a notice of termination as of November 1,1980, citing a downturn in the market for its products. Harris sues seeking either specific performance or damages for breach of contract. Duval pleads the Statute of Frauds and/or a justified dismissal due to the economic situation. What is the probable outcome of the lawsuit?a. Harris will prevail because he has partially performed under the terms of the contract.b. Harris will lose because his termination was caused by economic lectors beyond Duvals control.c. Harris will lose because such a contract must be in writing and signed by a proper agent of Duval.d. Harris will prevail because the Statute of Frauds does not apply to contracts such as his.